diff options
| author | Nícolas F. R. A. Prado <nfraprado@collabora.com> | 2024-12-18 19:01:08 -0300 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2025-02-08 09:57:40 +0100 |
| commit | aa0e632b55e87990947c6943d8151ff6c188fcbc (patch) | |
| tree | e21e0c13f868021c8c750bac4b32d5bf35d63420 | |
| parent | f502835b42d346650e1b96927465a1aaedb4fd13 (diff) | |
arm64: dts: mediatek: mt8195: Remove suspend-breaking reset from pcie1
[ Upstream commit 3d7fdd8e38aafd4858935df2392762c1ab8fb40f ]
The MAC reset for PCIe port 1 on MT8195 when asserted during suspend
causes the system to hang during resume with the following error (with
no_console_suspend enabled):
mtk-pcie-gen3 112f8000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x0)
mtk-pcie-gen3 112f8000.pcie: PM: dpm_run_callback(): genpd_resume_noirq+0x0/0x24 returns -110
mtk-pcie-gen3 112f8000.pcie: PM: failed to resume noirq: error -110
This issue is specific to MT8195. On MT8192 with the PCIe reset,
MT8192_INFRA_RST4_PCIE_TOP_SWRST, added to the DT node, the issue is not
observed.
Since without the reset, the PCIe controller and WiFi card connected to
it, work just as well, remove the reset to allow the system to suspend
and resume properly.
Fixes: ecc0af6a3fe6 ("arm64: dts: mt8195: Add pcie and pcie phy nodes")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20241218-mt8195-pcie1-reset-suspend-fix-v1-1-1c021dda42a6@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
| -rw-r--r-- | arch/arm64/boot/dts/mediatek/mt8195.dtsi | 3 |
1 files changed, 0 insertions, 3 deletions
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index ade685ed2190..04e41b557d44 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -1611,9 +1611,6 @@ phy-names = "pcie-phy"; power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P1>; - resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P1_SWRST>; - reset-names = "mac"; - #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc1 0>, |