diff options
| author | Dongcheng Yan <dongcheng.yan@intel.com> | 2025-04-25 18:43:30 +0800 |
|---|---|---|
| committer | Hans Verkuil <hverkuil+cisco@kernel.org> | 2025-08-18 09:55:05 +0200 |
| commit | a032fe30cf09b6723ab61a05aee057311b00f9e1 (patch) | |
| tree | 631baf5c959f07c9fda35ccbc647c9c1f1e6d679 | |
| parent | da3fa08a89dc1cb33ed57d097239b9c7cd9e7a60 (diff) | |
platform/x86: int3472: add hpd pin support
Typically HDMI to MIPI CSI-2 bridges have a pin to signal image data is
being received. On the host side this is wired to a GPIO for polling or
interrupts. This includes the Lontium HDMI to MIPI CSI-2 bridges
lt6911uxe and lt6911uxc.
The GPIO "hpd" is used already by other HDMI to CSI-2 bridges, use it
here as well.
Signed-off-by: Dongcheng Yan <dongcheng.yan@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 20244cbafbd6 ("media: i2c: change lt6911uxe irq_gpio name to "hpd"")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
| -rw-r--r-- | drivers/platform/x86/intel/int3472/discrete.c | 6 | ||||
| -rw-r--r-- | include/linux/platform_data/x86/int3472.h | 1 |
2 files changed, 7 insertions, 0 deletions
diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c index 4c0aed6e626f..bdfb8a800c54 100644 --- a/drivers/platform/x86/intel/int3472/discrete.c +++ b/drivers/platform/x86/intel/int3472/discrete.c @@ -193,6 +193,10 @@ static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3 *con_id = "privacy-led"; *gpio_flags = GPIO_ACTIVE_HIGH; break; + case INT3472_GPIO_TYPE_HOTPLUG_DETECT: + *con_id = "hpd"; + *gpio_flags = GPIO_ACTIVE_HIGH; + break; case INT3472_GPIO_TYPE_POWER_ENABLE: *con_id = "avdd"; *gpio_flags = GPIO_ACTIVE_HIGH; @@ -223,6 +227,7 @@ static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3 * 0x0b Power enable * 0x0c Clock enable * 0x0d Privacy LED + * 0x13 Hotplug detect * * There are some known platform specific quirks where that does not quite * hold up; for example where a pin with type 0x01 (Power down) is mapped to @@ -292,6 +297,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, switch (type) { case INT3472_GPIO_TYPE_RESET: case INT3472_GPIO_TYPE_POWERDOWN: + case INT3472_GPIO_TYPE_HOTPLUG_DETECT: ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, con_id, gpio_flags); if (ret) err_msg = "Failed to map GPIO pin to sensor\n"; diff --git a/include/linux/platform_data/x86/int3472.h b/include/linux/platform_data/x86/int3472.h index 78276a11c48d..1571e9157fa5 100644 --- a/include/linux/platform_data/x86/int3472.h +++ b/include/linux/platform_data/x86/int3472.h @@ -27,6 +27,7 @@ #define INT3472_GPIO_TYPE_CLK_ENABLE 0x0c #define INT3472_GPIO_TYPE_PRIVACY_LED 0x0d #define INT3472_GPIO_TYPE_HANDSHAKE 0x12 +#define INT3472_GPIO_TYPE_HOTPLUG_DETECT 0x13 #define INT3472_PDEV_MAX_NAME_LEN 23 #define INT3472_MAX_SENSOR_GPIOS 3 |