vsock/test: Add test for null ptr deref when transport changes

Add a new test to ensure that when the transport changes a null pointer
dereference does not occur. The bug was reported upstream [1] and fixed
with commit 2cb7c756f605 ("vsock/virtio: discard packets if the
transport changes").

KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
CPU: 2 UID: 0 PID: 463 Comm: kworker/2:3 Not tainted
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:vsock_stream_has_data+0x44/0x70
Call Trace:
 virtio_transport_do_close+0x68/0x1a0
 virtio_transport_recv_pkt+0x1045/0x2ae4
 vsock_loopback_work+0x27d/0x3f0
 process_one_work+0x846/0x1420
 worker_thread+0x5b3/0xf80
 kthread+0x35a/0x700
 ret_from_fork+0x2d/0x70
 ret_from_fork_asm+0x1a/0x30

Note that this test may not fail in a kernel without the fix, but it may
hang on the client side if it triggers a kernel oops.

This works by creating a socket, trying to connect to a server, and then
executing a second connect operation on the same socket but to a
different CID (0). This triggers a transport change. If the connect
operation is interrupted by a signal, this could cause a null-ptr-deref.

Since this bug is non-deterministic, we need to try several times. It
is reasonable to assume that the bug will show up within the timeout
period.

If there is a G2H transport loaded in the system, the bug is not
triggered and this test will always pass. This is because
`vsock_assign_transport`, when using CID 0, like in this case, sets
vsk->transport to `transport_g2h` that is not NULL if a G2H transport is
available.

[1]https://lore.kernel.org/netdev/Z2LvdTTQR7dBmPb5@v4bel-B760M-AORUS-ELITE-AX/

Suggested-by: Hyunwoo Kim <v4bel@theori.io>
Suggested-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250630-test_vsock-v5-2-2492e141e80b@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2 files changed, 171 insertions, 0 deletions

diff --git a/tools/testing/vsock/Makefile b/tools/testing/vsock/Makefile
index 6e0b4e95e230..88211fd132d2 100644
--- a/tools/testing/vsock/Makefile
+++ b/tools/testing/vsock/Makefile
@@ -5,6 +5,7 @@ vsock_test: vsock_test.o vsock_test_zerocopy.o timeout.o control.o util.o msg_ze
 vsock_diag_test: vsock_diag_test.o timeout.o control.o util.o
 vsock_perf: vsock_perf.o msg_zerocopy_common.o
 
+vsock_test: LDLIBS = -lpthread
 vsock_uring_test: LDLIBS = -luring
 vsock_uring_test: control.o util.o vsock_uring_test.o timeout.o msg_zerocopy_common.o
 
diff --git a/tools/testing/vsock/vsock_test.c b/tools/testing/vsock/vsock_test.c
index eb6f54378667..be6ce764f694 100644
--- a/tools/testing/vsock/vsock_test.c
+++ b/tools/testing/vsock/vsock_test.c
@@ -22,6 +22,8 @@
 #include <signal.h>
 #include <sys/ioctl.h>
 #include <linux/time64.h>
+#include <pthread.h>
+#include <fcntl.h>
 
 #include "vsock_test_zerocopy.h"
 #include "timeout.h"
@@ -1867,6 +1869,169 @@ static void test_stream_connect_retry_server(const struct test_opts *opts)
 	close(fd);
 }
 
+#define TRANSPORT_CHANGE_TIMEOUT 2 /* seconds */
+
+static void *test_stream_transport_change_thread(void *vargp)
+{
+	pid_t *pid = (pid_t *)vargp;
+	int ret;
+
+	ret = pthread_setcanceltype(PTHREAD_CANCEL_ASYNCHRONOUS, NULL);
+	if (ret) {
+		fprintf(stderr, "pthread_setcanceltype: %d\n", ret);
+		exit(EXIT_FAILURE);
+	}
+
+	while (true) {
+		if (kill(*pid, SIGUSR1) < 0) {
+			perror("kill");
+			exit(EXIT_FAILURE);
+		}
+	}
+	return NULL;
+}
+
+static void test_transport_change_signal_handler(int signal)
+{
+	/* We need a custom handler for SIGUSR1 as the default one terminates the process. */
+}
+
+static void test_stream_transport_change_client(const struct test_opts *opts)
+{
+	__sighandler_t old_handler;
+	pid_t pid = getpid();
+	pthread_t thread_id;
+	time_t tout;
+	int ret, tr;
+
+	tr = get_transports();
+
+	/* Print a warning if there is a G2H transport loaded.
+	 * This is on a best effort basis because VMCI can be either G2H and H2G, and there is
+	 * no easy way to understand it.
+	 * The bug we are testing only appears when G2H transports are not loaded.
+	 * This is because `vsock_assign_transport`, when using CID 0, assigns a G2H transport
+	 * to vsk->transport. If none is available it is set to NULL, causing the null-ptr-deref.
+	 */
+	if (tr & TRANSPORTS_G2H)
+		fprintf(stderr, "G2H Transport detected. This test will not fail.\n");
+
+	old_handler = signal(SIGUSR1, test_transport_change_signal_handler);
+	if (old_handler == SIG_ERR) {
+		perror("signal");
+		exit(EXIT_FAILURE);
+	}
+
+	ret = pthread_create(&thread_id, NULL, test_stream_transport_change_thread, &pid);
+	if (ret) {
+		fprintf(stderr, "pthread_create: %d\n", ret);
+		exit(EXIT_FAILURE);
+	}
+
+	control_expectln("LISTENING");
+
+	tout = current_nsec() + TRANSPORT_CHANGE_TIMEOUT * NSEC_PER_SEC;
+	do {
+		struct sockaddr_vm sa = {
+			.svm_family = AF_VSOCK,
+			.svm_cid = opts->peer_cid,
+			.svm_port = opts->peer_port,
+		};
+		int s;
+
+		s = socket(AF_VSOCK, SOCK_STREAM, 0);
+		if (s < 0) {
+			perror("socket");
+			exit(EXIT_FAILURE);
+		}
+
+		ret = connect(s, (struct sockaddr *)&sa, sizeof(sa));
+		/* The connect can fail due to signals coming from the thread,
+		 * or because the receiver connection queue is full.
+		 * Ignoring also the latter case because there is no way
+		 * of synchronizing client's connect and server's accept when
+		 * connect(s) are constantly being interrupted by signals.
+		 */
+		if (ret == -1 && (errno != EINTR && errno != ECONNRESET)) {
+			perror("connect");
+			exit(EXIT_FAILURE);
+		}
+
+		/* Set CID to 0 cause a transport change. */
+		sa.svm_cid = 0;
+
+		/* Ignore return value since it can fail or not.
+		 * If the previous connect is interrupted while the
+		 * connection request is already sent, the second
+		 * connect() will wait for the response.
+		 */
+		connect(s, (struct sockaddr *)&sa, sizeof(sa));
+
+		close(s);
+
+		control_writeulong(CONTROL_CONTINUE);
+
+	} while (current_nsec() < tout);
+
+	control_writeulong(CONTROL_DONE);
+
+	ret = pthread_cancel(thread_id);
+	if (ret) {
+		fprintf(stderr, "pthread_cancel: %d\n", ret);
+		exit(EXIT_FAILURE);
+	}
+
+	ret = pthread_join(thread_id, NULL);
+	if (ret) {
+		fprintf(stderr, "pthread_join: %d\n", ret);
+		exit(EXIT_FAILURE);
+	}
+
+	if (signal(SIGUSR1, old_handler) == SIG_ERR) {
+		perror("signal");
+		exit(EXIT_FAILURE);
+	}
+}
+
+static void test_stream_transport_change_server(const struct test_opts *opts)
+{
+	int s = vsock_stream_listen(VMADDR_CID_ANY, opts->peer_port);
+
+	/* Set the socket to be nonblocking because connects that have been interrupted
+	 * (EINTR) can fill the receiver's accept queue anyway, leading to connect failure.
+	 * As of today (6.15) in such situation there is no way to understand, from the
+	 * client side, if the connection has been queued in the server or not.
+	 */
+	if (fcntl(s, F_SETFL, fcntl(s, F_GETFL, 0) | O_NONBLOCK) < 0) {
+		perror("fcntl");
+		exit(EXIT_FAILURE);
+	}
+	control_writeln("LISTENING");
+
+	while (control_readulong() == CONTROL_CONTINUE) {
+		/* Must accept the connection, otherwise the `listen`
+		 * queue will fill up and new connections will fail.
+		 * There can be more than one queued connection,
+		 * clear them all.
+		 */
+		while (true) {
+			int client = accept(s, NULL, NULL);
+
+			if (client < 0) {
+				if (errno == EAGAIN)
+					break;
+
+				perror("accept");
+				exit(EXIT_FAILURE);
+			}
+
+			close(client);
+		}
+	}
+
+	close(s);
+}
+
 static void test_stream_linger_client(const struct test_opts *opts)
 {
 	int fd;
@@ -2106,6 +2271,11 @@ static struct test_case test_cases[] = {
 		.run_client = test_stream_nolinger_client,
 		.run_server = test_stream_nolinger_server,
 	},
+	{
+		.name = "SOCK_STREAM transport change null-ptr-deref",
+		.run_client = test_stream_transport_change_client,
+		.run_server = test_stream_transport_change_server,
+	},
 	{},
 };