diff options
author | Anjelique Melendez <anjelique.melendez@oss.qualcomm.com> | 2025-07-10 15:45:54 -0700 |
---|---|---|
committer | Daniel Lezcano <daniel.lezcano@linaro.org> | 2025-07-13 18:01:17 +0200 |
commit | 348e104715744f4c97fb3408ee91b543eedc8af1 (patch) | |
tree | 7e4ba94b1e57d551f04e700f5952c7c72abd3e84 | |
parent | 1f835c6a4c844d7667ba0f8e47e685549719f0d6 (diff) |
thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 2 PMIC peripherals
Add support for TEMP_ALARM GEN2 PMIC peripherals with digital major
revision 2. This revision utilizes individual temp DAC registers
to set the threshold temperature for over-temperature stages 1 (warning),
2 (system shutdown), and 3 (emergency shutdown) instead of a single
register to specify a set of thresholds.
Co-developed-by: David Collins <david.collins@oss.qualcomm.com>
Signed-off-by: David Collins <david.collins@oss.qualcomm.com>
Signed-off-by: Anjelique Melendez <anjelique.melendez@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250710224555.3047790-5-anjelique.melendez@oss.qualcomm.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-rw-r--r-- | drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 138 |
1 files changed, 137 insertions, 1 deletions
diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c index c8e4db585d2bf..9fbfd192017da 100644 --- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c +++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c @@ -26,6 +26,11 @@ #define QPNP_TM_REG_SHUTDOWN_CTRL1 0x40 #define QPNP_TM_REG_ALARM_CTRL 0x46 +/* TEMP_DAC_STGx registers are only present for TEMP_GEN2 v2.0 */ +#define QPNP_TM_REG_TEMP_DAC_STG1 0x47 +#define QPNP_TM_REG_TEMP_DAC_STG2 0x48 +#define QPNP_TM_REG_TEMP_DAC_STG3 0x49 + #define QPNP_TM_TYPE 0x09 #define QPNP_TM_SUBTYPE_GEN1 0x08 #define QPNP_TM_SUBTYPE_GEN2 0x09 @@ -71,6 +76,25 @@ static const long temp_map_gen2_v1[THRESH_COUNT][STAGE_COUNT] = { #define TEMP_STAGE_HYSTERESIS 2000 +/* + * For TEMP_GEN2 v2.0, TEMP_DAC_STG1/2/3 registers are used to set the threshold + * for each stage independently. + * TEMP_DAC_STG* = 0 --> 80 C + * Each 8 step increase in TEMP_DAC_STG* value corresponds to 5 C (5000 mC). + */ +#define TEMP_DAC_MIN 80000 +#define TEMP_DAC_SCALE_NUM 8 +#define TEMP_DAC_SCALE_DEN 5000 + +#define TEMP_DAC_TEMP_TO_REG(temp) \ + (((temp) - TEMP_DAC_MIN) * TEMP_DAC_SCALE_NUM / TEMP_DAC_SCALE_DEN) +#define TEMP_DAC_REG_TO_TEMP(reg) \ + (TEMP_DAC_MIN + (reg) * TEMP_DAC_SCALE_DEN / TEMP_DAC_SCALE_NUM) + +static const long temp_dac_max[STAGE_COUNT] = { + 119375, 159375, 159375 +}; + /* Temperature in Milli Celsius reported during stage 0 if no ADC is present */ #define DEFAULT_TEMP 37000 @@ -93,6 +117,7 @@ struct qpnp_tm_chip { long temp; unsigned int stage; unsigned int base; + unsigned int ntrips; /* protects .thresh, .stage and chip registers */ struct mutex lock; bool initialized; @@ -310,6 +335,54 @@ static const struct thermal_zone_device_ops qpnp_tm_sensor_ops = { .set_trip_temp = qpnp_tm_set_trip_temp, }; +static int qpnp_tm_gen2_rev2_set_temp_thresh(struct qpnp_tm_chip *chip, unsigned int trip, int temp) +{ + int ret, temp_cfg; + u8 reg; + + WARN_ON(!mutex_is_locked(&chip->lock)); + + if (trip >= STAGE_COUNT) { + dev_err(chip->dev, "invalid TEMP_DAC trip = %d\n", trip); + return -EINVAL; + } else if (temp < TEMP_DAC_MIN || temp > temp_dac_max[trip]) { + dev_err(chip->dev, "invalid TEMP_DAC temp = %d\n", temp); + return -EINVAL; + } + + reg = TEMP_DAC_TEMP_TO_REG(temp); + temp_cfg = TEMP_DAC_REG_TO_TEMP(reg); + + ret = qpnp_tm_write(chip, QPNP_TM_REG_TEMP_DAC_STG1 + trip, reg); + if (ret < 0) { + dev_err(chip->dev, "TEMP_DAC_STG write failed, ret=%d\n", ret); + return ret; + } + + chip->temp_thresh_map[trip] = temp_cfg; + + return 0; +} + +static int qpnp_tm_gen2_rev2_set_trip_temp(struct thermal_zone_device *tz, + const struct thermal_trip *trip, int temp) +{ + unsigned int trip_index = THERMAL_TRIP_PRIV_TO_INT(trip->priv); + struct qpnp_tm_chip *chip = thermal_zone_device_priv(tz); + int ret; + + mutex_lock(&chip->lock); + ret = qpnp_tm_gen2_rev2_set_temp_thresh(chip, trip_index, temp); + mutex_unlock(&chip->lock); + + return ret; +} + +static const struct thermal_zone_device_ops qpnp_tm_gen2_rev2_sensor_ops = { + .get_temp = qpnp_tm_get_temp, + .set_trip_temp = qpnp_tm_gen2_rev2_set_trip_temp, +}; + static irqreturn_t qpnp_tm_isr(int irq, void *data) { struct qpnp_tm_chip *chip = data; @@ -351,6 +424,60 @@ static int qpnp_tm_configure_trip_temp(struct qpnp_tm_chip *chip) return ret; } +/* Configure TEMP_DAC registers based on DT thermal_zone trips */ +static int qpnp_tm_gen2_rev2_configure_trip_temps_cb(struct thermal_trip *trip, void *data) +{ + struct qpnp_tm_chip *chip = data; + int ret; + + mutex_lock(&chip->lock); + trip->priv = THERMAL_INT_TO_TRIP_PRIV(chip->ntrips); + ret = qpnp_tm_gen2_rev2_set_temp_thresh(chip, chip->ntrips, trip->temperature); + chip->ntrips++; + mutex_unlock(&chip->lock); + + return ret; +} + +static int qpnp_tm_gen2_rev2_configure_trip_temps(struct qpnp_tm_chip *chip) +{ + int ret, i; + + ret = thermal_zone_for_each_trip(chip->tz_dev, + qpnp_tm_gen2_rev2_configure_trip_temps_cb, chip); + if (ret < 0) + return ret; + + /* Verify that trips are strictly increasing. */ + for (i = 1; i < STAGE_COUNT; i++) { + if (chip->temp_thresh_map[i] <= chip->temp_thresh_map[i - 1]) { + dev_err(chip->dev, "Threshold %d=%ld <= threshold %d=%ld\n", + i, chip->temp_thresh_map[i], i - 1, + chip->temp_thresh_map[i - 1]); + return -EINVAL; + } + } + + return 0; +} + +/* Read the hardware default TEMP_DAC stage threshold temperatures */ +static int qpnp_tm_gen2_rev2_sync_thresholds(struct qpnp_tm_chip *chip) +{ + int ret, i; + u8 reg = 0; + + for (i = 0; i < STAGE_COUNT; i++) { + ret = qpnp_tm_read(chip, QPNP_TM_REG_TEMP_DAC_STG1 + i, ®); + if (ret < 0) + return ret; + + chip->temp_thresh_map[i] = TEMP_DAC_REG_TO_TEMP(reg); + } + + return 0; +} + static const struct spmi_temp_alarm_data spmi_temp_alarm_data = { .ops = &qpnp_tm_sensor_ops, .temp_map = &temp_map_gen1, @@ -375,6 +502,13 @@ static const struct spmi_temp_alarm_data spmi_temp_alarm_gen2_rev1_data = { .get_temp_stage = qpnp_tm_gen2_get_temp_stage, }; +static const struct spmi_temp_alarm_data spmi_temp_alarm_gen2_rev2_data = { + .ops = &qpnp_tm_gen2_rev2_sensor_ops, + .sync_thresholds = qpnp_tm_gen2_rev2_sync_thresholds, + .configure_trip_temps = qpnp_tm_gen2_rev2_configure_trip_temps, + .get_temp_stage = qpnp_tm_gen2_get_temp_stage, +}; + /* * This function initializes the internal temp value based on only the * current thermal stage and threshold. @@ -491,8 +625,10 @@ static int qpnp_tm_probe(struct platform_device *pdev) chip->data = &spmi_temp_alarm_data; else if (subtype == QPNP_TM_SUBTYPE_GEN2 && dig_major == 0) chip->data = &spmi_temp_alarm_gen2_data; - else if (subtype == QPNP_TM_SUBTYPE_GEN2 && dig_major >= 1) + else if (subtype == QPNP_TM_SUBTYPE_GEN2 && dig_major == 1) chip->data = &spmi_temp_alarm_gen2_rev1_data; + else if (subtype == QPNP_TM_SUBTYPE_GEN2 && dig_major >= 2) + chip->data = &spmi_temp_alarm_gen2_rev2_data; else return -ENODEV; |