diff options
| author | Baochen Qiang <quic_bqiang@quicinc.com> | 2025-04-18 10:55:48 +0800 |
|---|---|---|
| committer | Jeff Johnson <jeff.johnson@oss.qualcomm.com> | 2025-05-16 12:38:54 -0700 |
| commit | 29cb3d26d01c275ea652010cc62f324793e34a31 (patch) | |
| tree | 5109e18f473d3de2d0e762b73001e1efabca834d | |
| parent | 9a9e8ea7f6d31351039343e9e3b1927c61a2ccc3 (diff) | |
wifi: ath12k: use WMI_VDEV_SET_TPC_POWER_CMDID when EXT_TPC_REG_SUPPORT for 6 GHz
When station is connected to a 6 GHz AP, there are 2 ways to configure the
power limit to firmware. The first way is to send 2 WMI commands
WMI_PDEV_PARAM_TXPOWER_LIMIT2G/WMI_PDEV_PARAM_TXPOWER_LIMIT5G to firmware,
the second way is to send WMI_VDEV_SET_TPC_POWER_CMDID to firmware which
includes more parameters for power control.
When firmware advertises WMI_TLV_SERVICE_EXT_TPC_REG_SUPPORT, it supports
WMI_VDEV_SET_TPC_POWER_CMDID, ath12k uses it to send more parameters to
firmware. As chanctx is needed to extract necessary info for this command,
save it beforehand in ath12k_mac_op_assign_vif_chanctx().
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-15-c869c86cad60@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
| -rw-r--r-- | drivers/net/wireless/ath/ath12k/mac.c | 21 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath12k/wmi.h | 2 |
2 files changed, 23 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c index 0a53885d4f6a..af0164f08824 100644 --- a/drivers/net/wireless/ath/ath12k/mac.c +++ b/drivers/net/wireless/ath/ath12k/mac.c @@ -3739,6 +3739,18 @@ static void ath12k_mac_vif_setup_ps(struct ath12k_link_vif *arvif) psmode, arvif->vdev_id, ret); } +static bool ath12k_mac_supports_station_tpc(struct ath12k *ar, + struct ath12k_vif *ahvif, + const struct cfg80211_chan_def *chandef) +{ + return ath12k_wmi_supports_6ghz_cc_ext(ar) && + test_bit(WMI_TLV_SERVICE_EXT_TPC_REG_SUPPORT, ar->ab->wmi_ab.svc_map) && + ahvif->vdev_type == WMI_VDEV_TYPE_STA && + ahvif->vdev_subtype == WMI_VDEV_SUBTYPE_NONE && + chandef->chan && + chandef->chan->band == NL80211_BAND_6GHZ; +} + static void ath12k_mac_bss_info_changed(struct ath12k *ar, struct ath12k_link_vif *arvif, struct ieee80211_bss_conf *info, @@ -9360,6 +9372,15 @@ ath12k_mac_vdev_start_restart(struct ath12k_link_vif *arvif, return ret; } + /* TODO: For now we only set TPC power here. However when + * channel changes, say CSA, it should be updated again. + */ + if (ath12k_mac_supports_station_tpc(ar, ahvif, chandef)) { + ath12k_mac_fill_reg_tpc_info(ar, arvif, ctx); + ath12k_wmi_send_vdev_set_tpc_power(ar, arvif->vdev_id, + &arvif->reg_tpc_info); + } + ar->num_started_vdevs++; ath12k_dbg(ab, ATH12K_DBG_MAC, "vdev %pM started, vdev_id %d\n", ahvif->vif->addr, arvif->vdev_id); diff --git a/drivers/net/wireless/ath/ath12k/wmi.h b/drivers/net/wireless/ath/ath12k/wmi.h index 9d4ea4f359a7..d0a79a907dc7 100644 --- a/drivers/net/wireless/ath/ath12k/wmi.h +++ b/drivers/net/wireless/ath/ath12k/wmi.h @@ -2220,6 +2220,8 @@ enum wmi_tlv_service { WMI_MAX_EXT_SERVICE = 256, + WMI_TLV_SERVICE_EXT_TPC_REG_SUPPORT = 280, + WMI_TLV_SERVICE_REG_CC_EXT_EVENT_SUPPORT = 281, WMI_TLV_SERVICE_11BE = 289, |