diff options
| author | Nikita Travkin <nikita@trvn.ru> | 2024-03-15 18:51:18 +0500 |
|---|---|---|
| committer | Hans de Goede <hdegoede@redhat.com> | 2024-03-25 15:49:29 +0100 |
| commit | 0cd33df4e406ee4b705ee15d942a1ae8387a1d8b (patch) | |
| tree | a6e98c2bbb578c2af6d5b4835e2df616bcff655d | |
| parent | 2b3efb7c515111eaa009f014b16bce8417fb2828 (diff) | |
arm64: dts: qcom: acer-aspire1: Add embedded controller
The laptop contains an embedded controller that provides a set of
features:
- Battery and charger monitoring
- USB Type-C DP alt mode HPD monitoring
- Lid status detection
- Small amount of keyboard configuration*
[*] The keyboard is handled by the same EC but it has a dedicated i2c
bus and is already enabled. This port only provides fn key behavior
configuration.
Add the EC to the device tree and describe the relationship between the
EC-managed type-c port and the SoC DisplayPort.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20240315-aspire1-ec-v5-4-f93381deff39@trvn.ru
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts | 40 |
1 files changed, 39 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts index 5afcb8212f490..3f0d3e33894a0 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts @@ -255,7 +255,25 @@ clock-frequency = <400000>; status = "okay"; - /* embedded-controller@76 */ + embedded-controller@76 { + compatible = "acer,aspire1-ec"; + reg = <0x76>; + + interrupts-extended = <&tlmm 30 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&ec_int_default>; + pinctrl-names = "default"; + + connector { + compatible = "usb-c-connector"; + + port { + ec_dp_in: endpoint { + remote-endpoint = <&mdss_dp_out>; + }; + }; + }; + }; }; &i2c4 { @@ -419,6 +437,19 @@ status = "okay"; }; +&mdss_dp { + data-lanes = <0 1>; + + vdda-1p2-supply = <&vreg_l3c_1p2>; + vdda-0p9-supply = <&vreg_l4a_0p8>; + + status = "okay"; +}; + +&mdss_dp_out { + remote-endpoint = <&ec_dp_in>; +}; + &mdss_dsi0 { vdda-supply = <&vreg_l3c_1p2>; status = "okay"; @@ -857,6 +888,13 @@ bias-disable; }; + ec_int_default: ec-int-default-state { + pins = "gpio30"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + edp_bridge_irq_default: edp-bridge-irq-default-state { pins = "gpio11"; function = "gpio"; |