diff options
Diffstat (limited to 'sysdeps/s390/s390-64/utf8-utf32-z9.c')
-rw-r--r-- | sysdeps/s390/s390-64/utf8-utf32-z9.c | 511 |
1 files changed, 0 insertions, 511 deletions
diff --git a/sysdeps/s390/s390-64/utf8-utf32-z9.c b/sysdeps/s390/s390-64/utf8-utf32-z9.c deleted file mode 100644 index defd47d251..0000000000 --- a/sysdeps/s390/s390-64/utf8-utf32-z9.c +++ /dev/null @@ -1,511 +0,0 @@ -/* Conversion between UTF-8 and UTF-32 BE/internal. - - This module uses the Z9-109 variants of the Convert Unicode - instructions. - Copyright (C) 1997-2016 Free Software Foundation, Inc. - - Author: Andreas Krebbel <Andreas.Krebbel@de.ibm.com> - Based on the work by Ulrich Drepper <drepper@cygnus.com>, 1997. - - Thanks to Daniel Appich who covered the relevant performance work - in his diploma thesis. - - This is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with the GNU C Library; if not, see - <http://www.gnu.org/licenses/>. */ - -#include <dlfcn.h> -#include <stdint.h> -#include <unistd.h> -#include <dl-procinfo.h> -#include <gconv.h> - -/* UTF-32 big endian byte order mark. */ -#define BOM 0x0000feffu - -#define DEFINE_INIT 0 -#define DEFINE_FINI 0 -/* These definitions apply to the UTF-8 to UTF-32 direction. The - software implementation for UTF-8 still supports multibyte - characters up to 6 bytes whereas the hardware variant does not. */ -#define MIN_NEEDED_FROM 1 -#define MAX_NEEDED_FROM 6 -#define MIN_NEEDED_TO 4 -#define FROM_LOOP from_utf8_loop -#define TO_LOOP to_utf8_loop -#define FROM_DIRECTION (dir == from_utf8) -#define ONE_DIRECTION 0 -#define PREPARE_LOOP \ - enum direction dir = ((struct utf8_data *) step->__data)->dir; \ - int emit_bom = ((struct utf8_data *) step->__data)->emit_bom; \ - \ - if (emit_bom && !data->__internal_use \ - && data->__invocation_counter == 0) \ - { \ - /* Emit the Byte Order Mark. */ \ - if (__glibc_unlikely (outbuf + 4 > outend)) \ - return __GCONV_FULL_OUTPUT; \ - \ - put32u (outbuf, BOM); \ - outbuf += 4; \ - } - -/* Direction of the transformation. */ -enum direction -{ - illegal_dir, - to_utf8, - from_utf8 -}; - -struct utf8_data -{ - enum direction dir; - int emit_bom; -}; - - -extern int gconv_init (struct __gconv_step *step); -int -gconv_init (struct __gconv_step *step) -{ - /* Determine which direction. */ - struct utf8_data *new_data; - enum direction dir = illegal_dir; - int emit_bom; - int result; - - emit_bom = (__strcasecmp (step->__to_name, "UTF-32//") == 0); - - if (__strcasecmp (step->__from_name, "ISO-10646/UTF8/") == 0 - && (__strcasecmp (step->__to_name, "UTF-32//") == 0 - || __strcasecmp (step->__to_name, "UTF-32BE//") == 0 - || __strcasecmp (step->__to_name, "INTERNAL") == 0)) - { - dir = from_utf8; - } - else if (__strcasecmp (step->__to_name, "ISO-10646/UTF8/") == 0 - && (__strcasecmp (step->__from_name, "UTF-32BE//") == 0 - || __strcasecmp (step->__from_name, "INTERNAL") == 0)) - { - dir = to_utf8; - } - - result = __GCONV_NOCONV; - if (dir != illegal_dir) - { - new_data = (struct utf8_data *) malloc (sizeof (struct utf8_data)); - - result = __GCONV_NOMEM; - if (new_data != NULL) - { - new_data->dir = dir; - new_data->emit_bom = emit_bom; - step->__data = new_data; - - if (dir == from_utf8) - { - step->__min_needed_from = MIN_NEEDED_FROM; - step->__max_needed_from = MIN_NEEDED_FROM; - step->__min_needed_to = MIN_NEEDED_TO; - step->__max_needed_to = MIN_NEEDED_TO; - } - else - { - step->__min_needed_from = MIN_NEEDED_TO; - step->__max_needed_from = MIN_NEEDED_TO; - step->__min_needed_to = MIN_NEEDED_FROM; - step->__max_needed_to = MIN_NEEDED_FROM; - } - - step->__stateful = 0; - - result = __GCONV_OK; - } - } - - return result; -} - - -extern void gconv_end (struct __gconv_step *data); -void -gconv_end (struct __gconv_step *data) -{ - free (data->__data); -} - -/* The macro for the hardware loop. This is used for both - directions. */ -#define HARDWARE_CONVERT(INSTRUCTION) \ - { \ - register const unsigned char* pInput __asm__ ("8") = inptr; \ - register unsigned long long inlen __asm__ ("9") = inend - inptr; \ - register unsigned char* pOutput __asm__ ("10") = outptr; \ - register unsigned long long outlen __asm__("11") = outend - outptr; \ - uint64_t cc = 0; \ - \ - __asm__ volatile (".machine push \n\t" \ - ".machine \"z9-109\" \n\t" \ - "0: " INSTRUCTION " \n\t" \ - ".machine pop \n\t" \ - " jo 0b \n\t" \ - " ipm %2 \n" \ - : "+a" (pOutput), "+a" (pInput), "+d" (cc), \ - "+d" (outlen), "+d" (inlen) \ - : \ - : "cc", "memory"); \ - \ - inptr = pInput; \ - outptr = pOutput; \ - cc >>= 28; \ - \ - if (cc == 1) \ - { \ - result = __GCONV_FULL_OUTPUT; \ - break; \ - } \ - else if (cc == 2) \ - { \ - result = __GCONV_ILLEGAL_INPUT; \ - break; \ - } \ - } - -/* Conversion function from UTF-8 to UTF-32 internal/BE. */ - -#define MIN_NEEDED_INPUT MIN_NEEDED_FROM -#define MAX_NEEDED_INPUT MAX_NEEDED_FROM -#define MIN_NEEDED_OUTPUT MIN_NEEDED_TO -#define LOOPFCT FROM_LOOP -/* The software routine is copied from gconv_simple.c. */ -#define BODY \ - { \ - if (GLRO (dl_hwcap) & HWCAP_S390_ETF3EH) \ - { \ - HARDWARE_CONVERT ("cu14 %0, %1, 1"); \ - \ - if (inptr != inend) \ - { \ - int i; \ - for (i = 1; inptr + i < inend; ++i) \ - if ((inptr[i] & 0xc0) != 0x80) \ - break; \ - \ - if (__glibc_likely (inptr + i == inend)) \ - { \ - result = __GCONV_INCOMPLETE_INPUT; \ - break; \ - } \ - STANDARD_FROM_LOOP_ERR_HANDLER (i); \ - } \ - continue; \ - } \ - \ - /* Next input byte. */ \ - uint32_t ch = *inptr; \ - \ - if (__glibc_likely (ch < 0x80)) \ - { \ - /* One byte sequence. */ \ - ++inptr; \ - } \ - else \ - { \ - uint_fast32_t cnt; \ - uint_fast32_t i; \ - \ - if (ch >= 0xc2 && ch < 0xe0) \ - { \ - /* We expect two bytes. The first byte cannot be 0xc0 or \ - 0xc1, otherwise the wide character could have been \ - represented using a single byte. */ \ - cnt = 2; \ - ch &= 0x1f; \ - } \ - else if (__glibc_likely ((ch & 0xf0) == 0xe0)) \ - { \ - /* We expect three bytes. */ \ - cnt = 3; \ - ch &= 0x0f; \ - } \ - else if (__glibc_likely ((ch & 0xf8) == 0xf0)) \ - { \ - /* We expect four bytes. */ \ - cnt = 4; \ - ch &= 0x07; \ - } \ - else if (__glibc_likely ((ch & 0xfc) == 0xf8)) \ - { \ - /* We expect five bytes. */ \ - cnt = 5; \ - ch &= 0x03; \ - } \ - else if (__glibc_likely ((ch & 0xfe) == 0xfc)) \ - { \ - /* We expect six bytes. */ \ - cnt = 6; \ - ch &= 0x01; \ - } \ - else \ - { \ - /* Search the end of this ill-formed UTF-8 character. This \ - is the next byte with (x & 0xc0) != 0x80. */ \ - i = 0; \ - do \ - ++i; \ - while (inptr + i < inend \ - && (*(inptr + i) & 0xc0) == 0x80 \ - && i < 5); \ - \ - errout: \ - STANDARD_FROM_LOOP_ERR_HANDLER (i); \ - } \ - \ - if (__glibc_unlikely (inptr + cnt > inend)) \ - { \ - /* We don't have enough input. But before we report \ - that check that all the bytes are correct. */ \ - for (i = 1; inptr + i < inend; ++i) \ - if ((inptr[i] & 0xc0) != 0x80) \ - break; \ - \ - if (__glibc_likely (inptr + i == inend)) \ - { \ - result = __GCONV_INCOMPLETE_INPUT; \ - break; \ - } \ - \ - goto errout; \ - } \ - \ - /* Read the possible remaining bytes. */ \ - for (i = 1; i < cnt; ++i) \ - { \ - uint32_t byte = inptr[i]; \ - \ - if ((byte & 0xc0) != 0x80) \ - /* This is an illegal encoding. */ \ - break; \ - \ - ch <<= 6; \ - ch |= byte & 0x3f; \ - } \ - \ - /* If i < cnt, some trail byte was not >= 0x80, < 0xc0. \ - If cnt > 2 and ch < 2^(5*cnt-4), the wide character ch could \ - have been represented with fewer than cnt bytes. */ \ - if (i < cnt || (cnt > 2 && (ch >> (5 * cnt - 4)) == 0)) \ - { \ - /* This is an illegal encoding. */ \ - goto errout; \ - } \ - \ - inptr += cnt; \ - } \ - \ - /* Now adjust the pointers and store the result. */ \ - *((uint32_t *) outptr) = ch; \ - outptr += sizeof (uint32_t); \ - } -#define LOOP_NEED_FLAGS - -#define STORE_REST \ - { \ - /* We store the remaining bytes while converting them into the UCS4 \ - format. We can assume that the first byte in the buffer is \ - correct and that it requires a larger number of bytes than there \ - are in the input buffer. */ \ - wint_t ch = **inptrp; \ - size_t cnt, r; \ - \ - state->__count = inend - *inptrp; \ - \ - if (ch >= 0xc2 && ch < 0xe0) \ - { \ - /* We expect two bytes. The first byte cannot be 0xc0 or \ - 0xc1, otherwise the wide character could have been \ - represented using a single byte. */ \ - cnt = 2; \ - ch &= 0x1f; \ - } \ - else if (__glibc_likely ((ch & 0xf0) == 0xe0)) \ - { \ - /* We expect three bytes. */ \ - cnt = 3; \ - ch &= 0x0f; \ - } \ - else if (__glibc_likely ((ch & 0xf8) == 0xf0)) \ - { \ - /* We expect four bytes. */ \ - cnt = 4; \ - ch &= 0x07; \ - } \ - else if (__glibc_likely ((ch & 0xfc) == 0xf8)) \ - { \ - /* We expect five bytes. */ \ - cnt = 5; \ - ch &= 0x03; \ - } \ - else \ - { \ - /* We expect six bytes. */ \ - cnt = 6; \ - ch &= 0x01; \ - } \ - \ - /* The first byte is already consumed. */ \ - r = cnt - 1; \ - while (++(*inptrp) < inend) \ - { \ - ch <<= 6; \ - ch |= **inptrp & 0x3f; \ - --r; \ - } \ - \ - /* Shift for the so far missing bytes. */ \ - ch <<= r * 6; \ - \ - /* Store the number of bytes expected for the entire sequence. */ \ - state->__count |= cnt << 8; \ - \ - /* Store the value. */ \ - state->__value.__wch = ch; \ - } - -#define UNPACK_BYTES \ - { \ - static const unsigned char inmask[5] = { 0xc0, 0xe0, 0xf0, 0xf8, 0xfc }; \ - wint_t wch = state->__value.__wch; \ - size_t ntotal = state->__count >> 8; \ - \ - inlen = state->__count & 255; \ - \ - bytebuf[0] = inmask[ntotal - 2]; \ - \ - do \ - { \ - if (--ntotal < inlen) \ - bytebuf[ntotal] = 0x80 | (wch & 0x3f); \ - wch >>= 6; \ - } \ - while (ntotal > 1); \ - \ - bytebuf[0] |= wch; \ - } - -#define CLEAR_STATE \ - state->__count = 0 - -#include <iconv/loop.c> - -/* Conversion from UTF-32 internal/BE to UTF-8. */ - -#define MIN_NEEDED_INPUT MIN_NEEDED_TO -#define MIN_NEEDED_OUTPUT MIN_NEEDED_FROM -#define MAX_NEEDED_OUTPUT MAX_NEEDED_FROM -#define LOOPFCT TO_LOOP -/* The software routine mimics the S/390 cu41 instruction. */ -#define BODY \ - { \ - if (GLRO (dl_hwcap) & HWCAP_S390_ETF3EH) \ - { \ - HARDWARE_CONVERT ("cu41 %0, %1"); \ - \ - if (inptr != inend) \ - { \ - result = __GCONV_INCOMPLETE_INPUT; \ - break; \ - } \ - continue; \ - } \ - \ - uint32_t wc = *((const uint32_t *) inptr); \ - \ - if (__glibc_likely (wc <= 0x7f)) \ - { \ - /* Single UTF-8 char. */ \ - *outptr = (uint8_t)wc; \ - outptr++; \ - } \ - else if (wc <= 0x7ff) \ - { \ - /* Two UTF-8 chars. */ \ - if (__glibc_unlikely (outptr + 2 > outend)) \ - { \ - /* Overflow in the output buffer. */ \ - result = __GCONV_FULL_OUTPUT; \ - break; \ - } \ - \ - outptr[0] = 0xc0; \ - outptr[0] |= wc >> 6; \ - \ - outptr[1] = 0x80; \ - outptr[1] |= wc & 0x3f; \ - \ - outptr += 2; \ - } \ - else if (wc <= 0xffff) \ - { \ - /* Three UTF-8 chars. */ \ - if (__glibc_unlikely (outptr + 3 > outend)) \ - { \ - /* Overflow in the output buffer. */ \ - result = __GCONV_FULL_OUTPUT; \ - break; \ - } \ - outptr[0] = 0xe0; \ - outptr[0] |= wc >> 12; \ - \ - outptr[1] = 0x80; \ - outptr[1] |= (wc >> 6) & 0x3f; \ - \ - outptr[2] = 0x80; \ - outptr[2] |= wc & 0x3f; \ - \ - outptr += 3; \ - } \ - else if (wc <= 0x10ffff) \ - { \ - /* Four UTF-8 chars. */ \ - if (__glibc_unlikely (outptr + 4 > outend)) \ - { \ - /* Overflow in the output buffer. */ \ - result = __GCONV_FULL_OUTPUT; \ - break; \ - } \ - outptr[0] = 0xf0; \ - outptr[0] |= wc >> 18; \ - \ - outptr[1] = 0x80; \ - outptr[1] |= (wc >> 12) & 0x3f; \ - \ - outptr[2] = 0x80; \ - outptr[2] |= (wc >> 6) & 0x3f; \ - \ - outptr[3] = 0x80; \ - outptr[3] |= wc & 0x3f; \ - \ - outptr += 4; \ - } \ - else \ - { \ - STANDARD_TO_LOOP_ERR_HANDLER (4); \ - } \ - inptr += 4; \ - } -#define LOOP_NEED_FLAGS -#include <iconv/loop.c> - -#include <iconv/skeleton.c> |