path: root/main.c

/*
 *  XIOHV5.12 power sequence
 *  Copyright (C) 2012  Avencall
 *  Authors:
 *    Jean Marc Ouvrard
 *    Noe Rubinstein
 *    Guillaume Knispel
 *
 *  This program is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 3 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

/* define TRACE_SERIAL to get debugging traces capabilities on the
 * MSP430 serial port
 * WARNING: This might disable some functions too, check the code
 * to see exactly what that does in this particular version */
#define TRACE_SERIAL

#ifdef TRACE_SERIAL
#include <stdio.h>
#endif /* TRACE_SERIAL */

#include <stdbool.h>

#include <io430.h>
#include <intrinsics.h>

#include "def.h"
#include "hardware.h"

static void InitPorts(void);
static void GlobalInit(void);

volatile u16 TAVector;
volatile u16 Timer1;
volatile u16 Timer2;
volatile u16 SW1State;
volatile u16 SW2State;

#ifdef CAN_WAIT_TENSION

//has to be coded on real board
volatile u8 bV1P0 = true;
volatile u8 bV1P2 = true;
volatile u8 bV1P8_DDR = true;
volatile u8 bV2P5 = true;
volatile u8 bVCC3 = true;

#define TENSION_EXPIRED (Timer1 == 0)
#define TENSION_WAIT(t) (t)

#else

#define TENSION_EXPIRED (0)
#define TENSION_WAIT(t) (Timer1 == 0)

#endif

#define STOP             10
#define WAIT_START       20
#define WAIT_ATX_OK      30
#define WAIT_V1P0        40
#define WAIT_V1P2        50
#define WAIT_V1P8        60
#define WAIT_RSMRST      70
#define CK410_VTT_GD     80
#define STATE_SYS_PWR_OK 90
#define CPU_RUN          100
#define WAIT_STOP        110

#define RST_STATE        10
#define ON_STATE         20
#define RST_WAIT         30


#ifdef TRACE_SERIAL

// For UCOS16 = 1
// BRCLK        Baud Rate   UCBRx UCBRSx UCBRFx   Tx Error  Rx Error
// 12,000,000   115200          6      0      8     -1.8 0  -2.2 0.4
static void SerialInit(void)
{
  UCA0CTL1_bit.UCSWRST = 1;

  UCA0CTL0 = 0;
  UCA0CTL1 = 0xC1;  // UCSSEL=11b => SMCLK; (keep) UCSWRST = 1;
  UCA0BR0 = 6;
  UCA0BR1 = 0;
  UCA0MCTL = 0x81;  // UCOS16 = 1; UCBRSx = 0; UCBRFx = 8;
  UCA0STAT = 0;

  // Configure port for UART access
  // Pin 25 as UCA0TXD
  // Pin 26 as UCA0RXD
  P3SEL |= 0x30;

  UCA0CTL1_bit.UCSWRST = 0;
}


static void ll_putchar(unsigned char c)
{
  while (!IFG2_bit.UCA0TXIFG);
  UCA0TXBUF = c;
}

/* __write, remove, __close, and __lseek need to be implemented by the
 * application for the full DLib to work.
 */

size_t __write(int handle, const unsigned char * buffer, size_t size)
{
  size_t nChars = 0;

  if (buffer == 0)
    return 0;

  for (; size != 0; --size) {
    ll_putchar(*buffer++);
    ++nChars;
  }

  return nChars;
}

int remove(const char *name)
{
  return -1;
}

int __close(int handle)
{
  return 0;
}

long __lseek(int handle, long offset, int whence)
{
  return -1;
}

// TB_SIZE must be a power of 2
#define TB_SIZE 64
static u8 trace_buffer[TB_SIZE];
static u8 tb_beg;
static u8 tb_fill;

static inline u8 TB_I(u8 raw_idx)
{
  return raw_idx & (TB_SIZE - 1);
}

static void trace(u8 val)
{
  if (tb_fill == TB_SIZE) {
    tb_beg = TB_I(tb_beg + 1);
    tb_fill--;
  }
  trace_buffer[TB_I(tb_beg + (tb_fill++))];
}

static inline char hex_nibble(u8 n)
{
  return n + ((n > 9) ? 'a' - 10 : '0');
}

static inline void dump_byte(char b[3], u8 n)
{
  b[0] = hex_nibble(n >> 4);
  b[1] = hex_nibble(n & 0xf);
  b[2] = ' ';
}

static void dump_trace(void)
{
  static char buf[64];
  int pos = 0;
  #define flush() do { buf[pos] = 0; fputs(buf, stdout); pos = 0; } while (0)
  
  int i;

  fputs("TRACE:\r\n", stdout);
  pos = 0;
  for (i = 0; i < tb_fill; i++) {
    dump_byte(buf + pos, trace_buffer[TB_I(tb_beg + i)]);
    pos += 3;

    if (i & 15 == 15) {
      buf[pos++] = '\r';
      buf[pos++] = '\n';
    } else if (i & 7 == 7) {
      buf[pos++] = ' ';
    }
      
    if (pos >= 56)
        flush();
  }
  flush();
  if (i & 15) puts("\r");
}

#define TRACE(v)          trace(v)
#define change_state(ns)  do { trace(ns); state = (ns); } while (0)

#else /* !TRACE_SERIAL */

#define TRACE(v)          /* noop */
#define change_state(ns)  do { state = (ns); } while (0)

#endif /* TRACE_SERIAL */


int main(void)
{
  u16 state, resetState;

  WDTCTL = WDTPW + WDTHOLD; // Stop watchdog timer to prevent time out reset

  __disable_interrupt();

  InitPorts();
  GlobalInit();
#ifdef TRACE_SERIAL
  SerialInit();
#endif /* TRACE_SERIAL */

  __enable_interrupt();

  state = WAIT_START;
  resetState = ON_STATE;
  while (1) {

    ////////////////////////////////////////////////////////////////////
#ifdef TRACE_SERIAL // debug behavior
    switch (resetState) {
      case ON_STATE:
        if (SW2State > 100)
          dump_trace();
        resetState = RST_WAIT;
        break;
      case RST_WAIT:
        if (SW2State == 0)
          resetState = ON_STATE;
        break;
    }
#else               // normal behavior
    switch (resetState) {
    case ON_STATE:
      if (SW2State > 300) {
        resetState = RST_STATE;
      }
      break;

    case RST_STATE:
      ClrBit(P2REN, SYS_RESET_N);
      SetBit(P2DIR, SYS_RESET_N);
      ClrBit(P2OUT, SYS_RESET_N);
      Timer2 = 150;
      resetState = RST_WAIT;
      break;

    case RST_WAIT:
      if (Timer2 == 0) {
         SetBit(P2OUT, SYS_RESET_N);
         if (SW2State == 0)
           resetState = ON_STATE;
      }
      break;
    }
#endif /* TRACE_SERIAL */

    ////////////////////////////////////////////////////////////////////
    switch (state) {
    case WAIT_START:
      if (SW1State > 30)
        change_state(WAIT_START + 1);
      break;
    case WAIT_START + 1:
      if (SW1State == 0) {
        SetBit(P4OUT, CMDPWR); // Start Atx Power Supply
        Timer1 = 2000;
        change_state(WAIT_ATX_OK);
      }
      break;

    case WAIT_ATX_OK:
      if (SW1State || TENSION_EXPIRED) {
        change_state(STOP);
      }
      if ((P4IN & ATX_PWROK) && TENSION_WAIT(bV2P5 && bVCC3)) {
        ClrBit(P1OUT, V1P2_CORE_EN_N);
        Timer1 = 30;
        change_state(WAIT_V1P2);
      }
      break;

    case WAIT_V1P2:
      if (SW1State || TENSION_EXPIRED)
        change_state(STOP);
      if (TENSION_WAIT(bV1P2)) {
        Timer1 = 30;
        SetBit(P4OUT, V1P8_CMD);
        change_state(WAIT_RSMRST);
      }
      break;

    case WAIT_RSMRST:
      if (SW1State)
        change_state(STOP);
      if (Timer1 < 19) {
        SetBit(P2OUT, IMCH_RSMRST_N);
        change_state(WAIT_V1P8);
      }
      break;

    case WAIT_V1P8:
      if (SW1State || TENSION_EXPIRED)
        change_state(STOP);
      if (TENSION_WAIT(bV1P8)) {
        ClrBit(P2OUT, CPU_VCCP_EN_N);
        Timer1 = 30;
        change_state(WAIT_V1P0);
      }
      break;

    case WAIT_V1P0:
      if (SW1State || TENSION_EXPIRED)
        change_state(STOP);
      if (TENSION_WAIT(bV1P0)) {
        SetBit(P3OUT, VRMPWRGD);
        ClrBit(P2OUT, GREEN_LED_N);
        Timer1 = 3;
        change_state(CK410_VTT_GD);
      }
      break;

    case CK410_VTT_GD:
      if (Timer1 == 0) {
        SetBit(P2DIR, CK410_PWR_GD_N);
        ClrBit(P2OUT, CK410_PWR_GD_N);
        Timer1 = 105;
        change_state(STATE_SYS_PWR_OK);
      }
      break;

    case STATE_SYS_PWR_OK:
      if (Timer1 == 0) {
         SetBit(P3OUT, SYS_PWR_OK);
         Timer1 = 10;
         change_state(CPU_RUN);
      }
      break;

    case CPU_RUN:
      if (SW1State)
        change_state(STOP);
      if (Timer1 == 0) {
        // Start Tolapai: emulate the power button from its point of view
        // we don't really know where is the best place to do that so
        // we will try it here at first.
        SetBit(P2DIR, IMCH_PWRBTN_N);
        Timer1 = 200;
        change_state(CPU_RUN + 1);
      }
      break;
    case CPU_RUN + 1:
      if (SW1State)
        change_state(STOP);
      if (Timer1 == 0) {
        ClrBit(P2DIR, IMCH_PWRBTN_N);
        change_state(WAIT_STOP);
      }
      break;

    case WAIT_STOP:
      if (SW1State >= 6000) // Sw1 button pressed for more than 6 seconds
        change_state(STOP);
      break;

    case STOP:
      InitPorts();
      Timer1 = 500; // Disable any other Power up for 0.5 s.
      ClrBit(P2OUT, RED_LED_N); // To show no restart is possible for now
      change_state(STOP + 1);
      break;
    case STOP + 1:
      if (Timer1 == 0) {
        SetBit(P2OUT, RED_LED_N); // To show restart is possible now
        change_state(WAIT_START);
      }
      break;
    }
  }
}


#pragma vector = TIMERA1_VECTOR
__interrupt void Timer_A(void)
{
  if (!(P1IN & START_SW1_N))
    SW1State++;
  else
    SW1State = 0;

  if (!(P1IN & RST_SW2_N))
    SW2State++;
  else
    SW2State = 0;

  if (Timer1)
    Timer1--;

  if (Timer2)
    Timer2--;

  TAVector = TAIV;
}


static void InitPorts(void)
{
  /* DIR: direction: 0 input 1 output
   * SEL: function: 0 gpio
   * REN: resistor enabled
   * OUT: output when REN=0 and DIR=1
   *      0 pull-down 1 pull-up if REN=1
   * IES: Interrupt Edge Select
   * IE:  Interrupt Enable
   */

  P1DIR = P1DIR_INIT;
  P1SEL = P1SEL_INIT;
  P1REN = P1REN_INIT;
  P1OUT = P1OUT_INIT;
  P1IES = P1IES_INIT;
  P1IE = P1IE_INIT;

  P2OUT = P2OUT_INIT;
  P2SEL = P2SEL_INIT;
  P2REN = P2REN_INIT;
  P2DIR = P2DIR_INIT;
  P2IES = P2IES_INIT;
  P2IE = P2IE_INIT;

  P3OUT = P3OUT_INIT;
  P3SEL = P3SEL_INIT;
  P3DIR = P3DIR_INIT;

  P4OUT = P4OUT_INIT;
  P4SEL = P4SEL_INIT;
  P4DIR = P4DIR_INIT;
  P4REN = P4REN_INIT;
}


static void GlobalInit(void)
{
  DCOCTL = CALDCO_12MHZ;
  BCSCTL1 = CALBC1_12MHZ;

  TACTL = TASSEL_2 + ID_3 + TACLR + TAIE + MC_1; // SMCLK + div by 8 + reset +
                                                 // enable interrupt + UP

  // Calibrated DCO Frequencies - Tolerance Over Temperature 0C to 85C
  //
  //                                           Min Typ Max
  //             BCSCTL1 = CALBC1_12MHZ, 2.2 V 11.7 12 12.3
  // fCAL(12MHz) DCOCTL = CALDCO_12MHZ,   3 V  11.7 12 12.3 MHz
  //             Gating time: 5 ms       3.6 V 11.7 12 12.3

  // Timer_A called every:
  //
  // >>> 1539 / 1500000. * .975
  // 0.00100035                       1.000 ms min
  // >>> 1539 / 1500000.
  // 0.001026                         1.026 ms nom
  // >>> 1539 / 1500000. * 1.025
  // 0.00105165                       1.052 ms max

  TACCR0 = 1539;
}