summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2025-03-13perf bench: Fix undefined behavior in cmpworker()Kuan-Wei Chiu
commit 62892e77b8a64b9dc0e1da75980aa145347b6820 upstream. The comparison function cmpworker() violates the C standard's requirements for qsort() comparison functions, which mandate symmetry and transitivity: Symmetry: If x < y, then y > x. Transitivity: If x < y and y < z, then x < z. In its current implementation, cmpworker() incorrectly returns 0 when w1->tid < w2->tid, which breaks both symmetry and transitivity. This violation causes undefined behavior, potentially leading to issues such as memory corruption in glibc [1]. Fix the issue by returning -1 when w1->tid < w2->tid, ensuring compliance with the C standard and preventing undefined behavior. Link: https://www.qualys.com/2024/01/30/qsort.txt [1] Fixes: 121dd9ea0116 ("perf bench: Add epoll parallel epoll_wait benchmark") Cc: stable@vger.kernel.org Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com> Reviewed-by: James Clark <james.clark@linaro.org> Link: https://lore.kernel.org/r/20250116110842.4087530-1-visitorckw@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13udp: gso: do not drop small packets when PMTU reducesYan Zhai
[ Upstream commit 235174b2bed88501fda689c113c55737f99332d8 ] Commit 4094871db1d6 ("udp: only do GSO if # of segs > 1") avoided GSO for small packets. But the kernel currently dismisses GSO requests only after checking MTU/PMTU on gso_size. This means any packets, regardless of their payload sizes, could be dropped when PMTU becomes smaller than requested gso_size. We encountered this issue in production and it caused a reliability problem that new QUIC connection cannot be established before PMTU cache expired, while non GSO sockets still worked fine at the same time. Ideally, do not check any GSO related constraints when payload size is smaller than requested gso_size, and return EMSGSIZE instead of EINVAL on MTU/PMTU check failure to be more specific on the error cause. Fixes: 4094871db1d6 ("udp: only do GSO if # of segs > 1") Signed-off-by: Yan Zhai <yan@cloudflare.com> Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13ktest.pl: Check kernelrelease return in get_versionRicardo B. Marliere
commit a4e17a8f239a545c463f8ec27db4ed6e74b31841 upstream. In the case of a test that uses the special option ${KERNEL_VERSION} in one of its settings but has no configuration available in ${OUTPUT_DIR}, for example if it's a new empty directory, then the `make kernelrelease` call will fail and the subroutine will chomp an empty string, silently. Fix that by adding an empty configuration and retrying. Cc: stable@vger.kernel.org Cc: John Hawley <warthog9@eaglescrag.net> Fixes: 5f9b6ced04a4e ("ktest: Bisecting, install modules, add logging") Link: https://lore.kernel.org/20241205-ktest_kver_fallback-v2-1-869dae4c7777@suse.com Signed-off-by: Ricardo B. Marliere <rbm@suse.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13perf trace: Fix runtime error of index out of boundsHoward Chu
[ Upstream commit c7b87ce0dd10b64b68a0b22cb83bbd556e28fe81 ] libtraceevent parses and returns an array of argument fields, sometimes larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr", idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6 elements max, creating an out-of-bounds access. This runtime error is found by UBsan. The error message: $ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1 builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]' #0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966 #1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110 #2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436 #3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897 #4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335 #5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502 #6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351 #7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404 #8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448 #9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556 #10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360 #12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6) 0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1) = 1 Fixes: 5e58fcfaf4c6 ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint") Signed-off-by: Howard Chu <howardchu95@gmail.com> Link: https://lore.kernel.org/r/20250122025519.361873-1-howardchu95@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13perf report: Fix misleading help message about --demangleJiachen Zhang
[ Upstream commit ac0ac75189a4d6a29a2765a7adbb62bc6cc650c7 ] The wrong help message may mislead users. This commit fixes it. Fixes: 328ccdace8855289 ("perf report: Add --no-demangle option") Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Jiachen Zhang <me@jcix.top> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20250109152220.1869581-1-me@jcix.top Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13perf top: Don't complain about lack of vmlinux when not resolving some ↵Arnaldo Carvalho de Melo
kernel samples [ Upstream commit 058b38ccd2af9e5c95590b018e8425fa148d7aca ] Recently we got a case where a kernel sample wasn't being resolved due to a bug that was not setting the end address on kernel functions implemented in assembly (see Link: tag), and then those were not being found by machine__resolve() -> map__find_symbol(). So we ended up with: # perf top --stdio PerfTop: 0 irqs/s kernel: 0% exact: 0% lost: 0/0 drop: 0/0 [cycles/P] ----------------------------------------------------------------------- Warning: A vmlinux file was not found. Kernel samples will not be resolved. ^Z [1]+ Stopped perf top --stdio # But then resolving all other kernel symbols. So just fixup the logic to only print that warning when there are no symbols in the kernel map. Fixes: d88205db9caa0e9d ("perf dso: Add dso__has_symbols() method") Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/lkml/Z3buKhcCsZi3_aGb@x1 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13ktest.pl: Remove unused declarations in run_bisect_test functionBa Jing
[ Upstream commit 776735b954f49f85fd19e1198efa421fae2ad77c ] Since $output and $ret are not used in the subsequent code, the declarations should be removed. Fixes: a75fececff3c ("ktest: Added sample.conf, new %default option format") Link: https://lore.kernel.org/20240902130735.6034-1-bajing@cmss.chinamobile.com Signed-off-by: Ba Jing <bajing@cmss.chinamobile.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13perf header: Fix one memory leakage in process_bpf_prog_info()Zhongqiu Han
[ Upstream commit a7da6c7030e1aec32f0a41c7b4fa70ec96042019 ] Function __perf_env__insert_bpf_prog_info() will return without inserting bpf prog info node into perf env again due to a duplicate bpf prog info node insertion, causing the temporary info_linear and info_node memory to leak. Modify the return type of this function to bool and add a check to ensure the memory is freed if the function returns false. Fixes: 606f972b1361f477 ("perf bpf: Save bpf_prog_info information as headers to perf.data") Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <song@kernel.org> Cc: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20241205084500.823660-3-quic_zhonhan@quicinc.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13perf header: Fix one memory leakage in process_bpf_btf()Zhongqiu Han
[ Upstream commit 875d22980a062521beed7b5df71fb13a1af15d83 ] If __perf_env__insert_btf() returns false due to a duplicate btf node insertion, the temporary node will leak. Add a check to ensure the memory is freed if the function returns false. Fixes: a70a1123174ab592 ("perf bpf: Save BTF information as headers to perf.data") Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <song@kernel.org> Cc: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20241205084500.823660-2-quic_zhonhan@quicinc.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13tools/testing/selftests/bpf/test_tc_tunnel.sh: Fix wait for server bindMarco Leogrande
[ Upstream commit e2f0791124a1b6ca8d570110cbd487969d9d41ef ] Commit f803bcf9208a ("selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh") added code that waits for the netcat server to start before the netcat client attempts to connect to it. However, not all calls to 'server_listen' were guarded. This patch adds the existing 'wait_for_port' guard after the remaining call to 'server_listen'. Fixes: f803bcf9208a ("selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh") Signed-off-by: Marco Leogrande <leogrande@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://lore.kernel.org/r/20241202204530.1143448-1-leogrande@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13selftests: harness: fix printing of mismatch values in __EXPECT()Dmitry V. Levin
[ Upstream commit 02bc220dc6dc7c56edc4859bc5dd2c08b95d5fb5 ] intptr_t and uintptr_t are not big enough types on 32-bit architectures when printing 64-bit values, resulting to the following incorrect diagnostic output: # get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (3134324433) Replace intptr_t and uintptr_t with intmax_t and uintmax_t, respectively. With this fix, the same test produces more usable diagnostic output: # get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (18446744072548908753) Link: https://lore.kernel.org/r/20250108170757.GA6723@strace.io Fixes: b5bb6d3068ea ("selftests/seccomp: fix 32-bit build warnings") Signed-off-by: Dmitry V. Levin <ldv@strace.io> Reviewed-by: Kees Cook <kees@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13selftests/harness: Display signed values correctlyKees Cook
[ Upstream commit d088c92802549fc1cf77a12a4e3986160d63662a ] Since forever the harness output for signed value tests have reported unsigned values to avoid casting. Instead, actually test the variable types and perform the correct casts and choose the correct format specifiers. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Stable-dep-of: 02bc220dc6dc ("selftests: harness: fix printing of mismatch values in __EXPECT()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13cpupower: fix TSC MHz calculationHe Rongguang
[ Upstream commit 9d6c0e58514f8b57cd9c2c755e41623d6a966025 ] Commit 'cpupower: Make TSC read per CPU for Mperf monitor' (c2adb1877b7) changes TSC counter reads per cpu, but left time diff global (from start of all cpus to end of all cpus), thus diff(time) is too large for a cpu's tsc counting, resulting in far less than acutal TSC_Mhz and thus `cpupower monitor` showing far less than actual cpu realtime frequency. /proc/cpuinfo shows frequency: cat /proc/cpuinfo | egrep -e 'processor' -e 'MHz' ... processor : 171 cpu MHz : 4108.498 ... before fix (System 100% busy): | Mperf || Idle_Stats CPU| C0 | Cx | Freq || POLL | C1 | C2 171| 0.77| 99.23| 2279|| 0.00| 0.00| 0.00 after fix (System 100% busy): | Mperf || Idle_Stats CPU| C0 | Cx | Freq || POLL | C1 | C2 171| 0.46| 99.54| 4095|| 0.00| 0.00| 0.00 Fixes: c2adb1877b76 ("cpupower: Make TSC read per CPU for Mperf monitor") Signed-off-by: He Rongguang <herongguang@linux.alibaba.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13perf cs-etm: Add missing variable in cs_etm__process_queues()Ben Hutchings
Commit 5afd032961e8 "perf cs-etm: Don't flush when packet_queue fills up" uses i as a loop counter in cs_etm__process_queues(). It was backported to the 5.4 and 5.10 stable branches, but the i variable doesn't exist there as it was only added in 5.15. Declare i with the expected type. Fixes: 1ed167325c32 ("perf cs-etm: Don't flush when packet_queue fills up") Fixes: 26db806fa23e ("perf cs-etm: Don't flush when packet_queue fills up") Signed-off-by: Ben Hutchings <benh@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-14perf trace: Avoid garbage when not printing a syscall's argumentsBenjamin Peterson
[ Upstream commit 1302e352b26f34991b619b5d0b621b76d20a3883 ] syscall__scnprintf_args may not place anything in the output buffer (e.g., because the arguments are all zero). If that happened in trace__fprintf_sys_enter, its fprintf would receive an unitialized buffer leading to garbage output. Fix the problem by passing the (possibly zero) bounds of the argument buffer to the output fprintf. Fixes: a98392bb1e169a04 ("perf trace: Use beautifiers on syscalls:sys_enter_ handlers") Signed-off-by: Benjamin Peterson <benjamin@engflow.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Howard Chu <howardchu95@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20241107232128.108981-2-benjamin@engflow.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14perf trace: Do not lose last events in a raceBenjamin Peterson
[ Upstream commit 3fd7c36973a250e17a4ee305a31545a9426021f4 ] If a perf trace event selector specifies a maximum number of events to output (i.e., "/nr=N/" syntax), the event printing handler, trace__event_handler, disables the event selector after the maximum number events are printed. Furthermore, trace__event_handler checked if the event selector was disabled before doing any work. This avoided exceeding the maximum number of events to print if more events were in the buffer before the selector was disabled. However, the event selector can be disabled for reasons other than exceeding the maximum number of events. In particular, when the traced subprocess exits, the main loop disables all event selectors. This meant the last events of a traced subprocess might be lost to the printing handler's short-circuiting logic. This nondeterministic problem could be seen by running the following many times: $ perf trace -e syscalls:sys_enter_exit_group true trace__event_handler should simply check for exceeding the maximum number of events to print rather than the state of the event selector. Fixes: a9c5e6c1e9bff42c ("perf trace: Introduce per-event maximum number of events property") Signed-off-by: Benjamin Peterson <benjamin@engflow.com> Tested-by: Howard Chu <howardchu95@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20241107232128.108981-1-benjamin@engflow.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14perf probe: Correct demangled symbols in C++ programLeo Yan
[ Upstream commit 314909f13cc12d47c468602c37dace512d225eeb ] An issue can be observed when probe C++ demangled symbol with steps: # nm test_cpp_mangle | grep print_data 0000000000000c94 t _GLOBAL__sub_I__Z10print_datai 0000000000000afc T _Z10print_datai 0000000000000b38 T _Z10print_dataR5Point # perf probe -x /home/niayan01/test_cpp_mangle -F --demangle ... print_data(Point&) print_data(int) ... # perf --debug verbose=3 probe -x test_cpp_mangle --add "test=print_data(int)" probe-definition(0): test=print_data(int) symbol:print_data(int) file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /home/niayan01/test_cpp_mangle Try to find probe point from debuginfo. Symbol print_data(int) address found : afc Matched function: print_data [2ccf] Probe point found: print_data+0 Found 1 probe_trace_events. Opening /sys/kernel/tracing//uprobe_events write=1 Opening /sys/kernel/tracing//README write=0 Writing event: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0xb38 ... When tried to probe symbol "print_data(int)", the log shows: Symbol print_data(int) address found : afc The found address is 0xafc - which is right with verifying the output result from nm. Afterwards when write event, the command uses offset 0xb38 in the last log, which is a wrong address. The dwarf_diename() gets a common function name, in above case, it returns string "print_data". As a result, the tool parses the offset based on the common name. This leads to probe at the wrong symbol "print_data(Point&)". To fix the issue, use the die_get_linkage_name() function to retrieve the distinct linkage name - this is the mangled name for the C++ case. Based on this unique name, the tool can get a correct offset for probing. Based on DWARF doc, it is possible the linkage name is missed in the DIE, it rolls back to use dwarf_diename(). After: # perf --debug verbose=3 probe -x test_cpp_mangle --add "test=print_data(int)" probe-definition(0): test=print_data(int) symbol:print_data(int) file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /home/niayan01/test_cpp_mangle Try to find probe point from debuginfo. Symbol print_data(int) address found : afc Matched function: print_data [2d06] Probe point found: print_data+0 Found 1 probe_trace_events. Opening /sys/kernel/tracing//uprobe_events write=1 Opening /sys/kernel/tracing//README write=0 Writing event: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0xafc Added new event: probe_test_cpp_mangle:test (on print_data(int) in /home/niayan01/test_cpp_mangle) You can now use it in all perf tools, such as: perf record -e probe_test_cpp_mangle:test -aR sleep 1 # perf --debug verbose=3 probe -x test_cpp_mangle --add "test2=print_data(Point&)" probe-definition(0): test2=print_data(Point&) symbol:print_data(Point&) file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /home/niayan01/test_cpp_mangle Try to find probe point from debuginfo. Symbol print_data(Point&) address found : b38 Matched function: print_data [2ccf] Probe point found: print_data+0 Found 1 probe_trace_events. Opening /sys/kernel/tracing//uprobe_events write=1 Parsing probe_events: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0x0000000000000afc Group:probe_test_cpp_mangle Event:test probe:p Opening /sys/kernel/tracing//README write=0 Writing event: p:probe_test_cpp_mangle/test2 /home/niayan01/test_cpp_mangle:0xb38 Added new event: probe_test_cpp_mangle:test2 (on print_data(Point&) in /home/niayan01/test_cpp_mangle) You can now use it in all perf tools, such as: perf record -e probe_test_cpp_mangle:test2 -aR sleep 1 Fixes: fb1587d869a3 ("perf probe: List probes with line number and file name") Signed-off-by: Leo Yan <leo.yan@arm.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20241012141432.877894-1-leo.yan@arm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14perf cs-etm: Don't flush when packet_queue fills upJames Clark
[ Upstream commit 5afd032961e8465808c4bc385c06e7676fbe1951 ] cs_etm__flush(), like cs_etm__sample() is an operation that generates a sample and then swaps the current with the previous packet. Calling flush after processing the queues results in two swaps which corrupts the next sample. Therefore it wasn't appropriate to call flush here so remove it. Flushing is still done on a discontinuity to explicitly clear the last branch buffer, but when the packet_queue fills up before reaching a timestamp, that's not a discontinuity and the call to cs_etm__process_traceid_queue() already generated samples and drained the buffers correctly. This is visible by looking for a branch that has the same target as the previous branch and the following source is before the address of the last target, which is impossible as execution would have had to have gone backwards: ffff800080849d40 _find_next_and_bit+0x78 => ffff80008011cadc update_sg_lb_stats+0x94 (packet_queue fills here before a timestamp, resulting in a flush and branch target ffff80008011cadc is duplicated.) ffff80008011cb1c update_sg_lb_stats+0xd4 => ffff80008011cadc update_sg_lb_stats+0x94 ffff8000801117c4 cpu_util+0x24 => ffff8000801117d4 cpu_util+0x34 After removing the flush the correct branch target is used for the second sample, and ffff8000801117c4 is no longer before the previous address: ffff800080849d40 _find_next_and_bit+0x78 => ffff80008011cadc update_sg_lb_stats+0x94 ffff80008011cb1c update_sg_lb_stats+0xd4 => ffff8000801117a0 cpu_util+0x0 ffff8000801117c4 cpu_util+0x24 => ffff8000801117d4 cpu_util+0x34 Make sure that a final branch stack is output at the end of the trace by calling cs_etm__end_block(). This is already done for both the timeless decode paths. Fixes: 21fe8dc1191a ("perf cs-etm: Add support for CPU-wide trace scenarios") Reported-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com> Closes: https://lore.kernel.org/all/20240719092619.274730-1-gankulkarni@os.amperecomputing.com/ Reviewed-by: Leo Yan <leo.yan@arm.com> Signed-off-by: James Clark <james.clark@linaro.org> Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com> Cc: Ben Gainey <ben.gainey@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Ruidong Tian <tianruidong@linux.alibaba.com> Cc: Benjamin Gray <bgray@linux.ibm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: coresight@lists.linaro.org Cc: John Garry <john.g.garry@oracle.com> Cc: scclevenger@os.amperecomputing.com Link: https://lore.kernel.org/r/20240916135743.1490403-2-james.clark@linaro.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14powerpc/vdso: Flag VDSO64 entry points as functionsChristophe Leroy
[ Upstream commit 0161bd38c24312853ed5ae9a425a1c41c4ac674a ] On powerpc64 as shown below by readelf, vDSO functions symbols have type NOTYPE. $ powerpc64-linux-gnu-readelf -a arch/powerpc/kernel/vdso/vdso64.so.dbg ELF Header: Magic: 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00 Class: ELF64 Data: 2's complement, big endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: DYN (Shared object file) Machine: PowerPC64 Version: 0x1 ... Symbol table '.dynsym' contains 12 entries: Num: Value Size Type Bind Vis Ndx Name ... 1: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 ... 4: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15 5: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 Symbol table '.symtab' contains 56 entries: Num: Value Size Type Bind Vis Ndx Name ... 45: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15 46: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __kernel_getcpu 47: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __kernel_clock_getres To overcome that, commit ba83b3239e65 ("selftests: vDSO: fix vDSO symbols lookup for powerpc64") was applied to have selftests also look for NOTYPE symbols, but the correct fix should be to flag VDSO entry points as functions. The original commit that brought VDSO support into powerpc/64 has the following explanation: Note that the symbols exposed by the vDSO aren't "normal" function symbols, apps can't be expected to link against them directly, the vDSO's are both seen as if they were linked at 0 and the symbols just contain offsets to the various functions. This is done on purpose to avoid a relocation step (ppc64 functions normally have descriptors with abs addresses in them). When glibc uses those functions, it's expected to use it's own trampolines that know how to reach them. The descriptors it's talking about are the OPD function descriptors used on ABI v1 (big endian). But it would be more correct for a text symbol to have type function, even if there's no function descriptor for it. glibc has a special case already for handling the VDSO symbols which creates a fake opd pointing at the kernel symbol. So changing the VDSO symbol type to function shouldn't affect that. For ABI v2, there is no function descriptors and VDSO functions can safely have function type. So lets flag VDSO entry points as functions and revert the selftest change. Link: https://github.com/mpe/linux-fullhistory/commit/5f2dd691b62da9d9cc54b938f8b29c22c93cb805 Fixes: ba83b3239e65 ("selftests: vDSO: fix vDSO symbols lookup for powerpc64") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-By: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/b6ad2f1ee9887af3ca5ecade2a56f4acda517a85.1728512263.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14selftests: net: really check for bg process completionPaolo Abeni
[ Upstream commit 52ed077aa6336dbef83a2d6d21c52d1706fb7f16 ] A recent refactor transformed the check for process completion in a true statement, due to a typo. As a result, the relevant test-case is unable to catch the regression it was supposed to detect. Restore the correct condition. Fixes: 691bb4e49c98 ("selftests: net: avoid just another constant wait") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/0e6f213811f8e93a235307e683af8225cc6277ae.1730828007.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14selftests/watchdog-test: Fix system accidentally reset after watchdog-testLi Zhijian
[ Upstream commit dc1308bee1ed03b4d698d77c8bd670d399dcd04d ] When running watchdog-test with 'make run_tests', the watchdog-test will be terminated by a timeout signal(SIGTERM) due to the test timemout. And then, a system reboot would happen due to watchdog not stop. see the dmesg as below: ``` [ 1367.185172] watchdog: watchdog0: watchdog did not stop! ``` Fix it by registering more signals(including SIGTERM) in watchdog-test, where its signal handler will stop the watchdog. After that # timeout 1 ./watchdog-test Watchdog Ticking Away! . Stopping watchdog ticks... Link: https://lore.kernel.org/all/20241029031324.482800-1-lizhijian@fujitsu.com/ Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-08usbip: tools: Fix detach_port() invalid port error pathZongmin Zhou
commit e7cd4b811c9e019f5acbce85699c622b30194c24 upstream. The detach_port() doesn't return error when detach is attempted on an invalid port. Fixes: 40ecdeb1a187 ("usbip: usbip_detach: fix to check for invalid ports") Cc: stable@vger.kernel.org Reviewed-by: Hongren Zheng <i@zenithal.me> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn> Link: https://lore.kernel.org/r/20241024022700.1236660-1-min_halo@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-08tools/iio: Add memory allocation failure check for trigger_nameZhu Jun
[ Upstream commit 3c6b818b097dd6932859bcc3d6722a74ec5931c1 ] Added a check to handle memory allocation failure for `trigger_name` and return `-ENOMEM`. Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com> Link: https://patch.msgid.link/20240828093129.3040-1-zhujun2@cmss.chinamobile.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-08ktest.pl: Avoid false positives with grub2 skip regexDaniel Jordan
[ Upstream commit 2351e8c65404aabc433300b6bf90c7a37e8bbc4d ] Some distros have grub2 config files with the lines if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi which match the skip regex defined for grub2 in get_grub_index(): $skip = '^\s*menuentry'; These false positives cause the grub number to be higher than it should be, and the wrong kernel can end up booting. Grub documents the menuentry command with whitespace between it and the title, so make the skip regex reflect this. Link: https://lore.kernel.org/20240904175530.84175-1-daniel.m.jordan@oracle.com Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: John 'Warthog9' Hawley (Tenstorrent) <warthog9@eaglescrag.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-08selftests: vDSO: fix vDSO symbols lookup for powerpc64Christophe Leroy
[ Upstream commit ba83b3239e657469709d15dcea5f9b65bf9dbf34 ] On powerpc64, following tests fail locating vDSO functions: ~ # ./vdso_test_abi TAP version 13 1..16 # [vDSO kselftest] VDSO_VERSION: LINUX_2.6.15 # Couldn't find __kernel_gettimeofday ok 1 # SKIP __kernel_gettimeofday # clock_id: CLOCK_REALTIME # Couldn't find __kernel_clock_gettime ok 2 # SKIP __kernel_clock_gettime CLOCK_REALTIME # Couldn't find __kernel_clock_getres ok 3 # SKIP __kernel_clock_getres CLOCK_REALTIME ... # Couldn't find __kernel_time ok 16 # SKIP __kernel_time # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:16 error:0 ~ # ./vdso_test_getrandom __kernel_getrandom is missing! ~ # ./vdso_test_gettimeofday Could not find __kernel_gettimeofday ~ # ./vdso_test_getcpu Could not find __kernel_getcpu On powerpc64, as shown below by readelf, vDSO functions symbols have type NOTYPE, so also accept that type when looking for symbols. $ powerpc64-linux-gnu-readelf -a arch/powerpc/kernel/vdso/vdso64.so.dbg ELF Header: Magic: 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00 Class: ELF64 Data: 2's complement, big endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: DYN (Shared object file) Machine: PowerPC64 Version: 0x1 ... Symbol table '.dynsym' contains 12 entries: Num: Value Size Type Bind Vis Ndx Name 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND 1: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 2: 00000000000005f0 36 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 3: 0000000000000578 68 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 4: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15 5: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 6: 0000000000000614 172 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 7: 00000000000006f0 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 8: 000000000000047c 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 9: 0000000000000454 12 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 10: 00000000000004d0 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 11: 00000000000005bc 52 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 Symbol table '.symtab' contains 56 entries: Num: Value Size Type Bind Vis Ndx Name ... 45: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15 46: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __kernel_getcpu 47: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __kernel_clock_getres 48: 00000000000005f0 36 NOTYPE GLOBAL DEFAULT 8 __kernel_get_tbfreq 49: 000000000000047c 84 NOTYPE GLOBAL DEFAULT 8 __kernel_gettimeofday 50: 0000000000000614 172 NOTYPE GLOBAL DEFAULT 8 __kernel_sync_dicache 51: 00000000000006f0 84 NOTYPE GLOBAL DEFAULT 8 __kernel_getrandom 52: 0000000000000454 12 NOTYPE GLOBAL DEFAULT 8 __kernel_sigtram[...] 53: 0000000000000578 68 NOTYPE GLOBAL DEFAULT 8 __kernel_time 54: 00000000000004d0 84 NOTYPE GLOBAL DEFAULT 8 __kernel_clock_g[...] 55: 00000000000005bc 52 NOTYPE GLOBAL DEFAULT 8 __kernel_get_sys[...] Fixes: 98eedc3a9dbf ("Document the vDSO and add a reference parser") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-08selftests: breakpoints: use remaining time to check if suspend succeedYifei Liu
[ Upstream commit c66be905cda24fb782b91053b196bd2e966f95b7 ] step_after_suspend_test fails with device busy error while writing to /sys/power/state to start suspend. The test believes it failed to enter suspend state with $ sudo ./step_after_suspend_test TAP version 13 Bail out! Failed to enter Suspend state However, in the kernel message, I indeed see the system get suspended and then wake up later. [611172.033108] PM: suspend entry (s2idle) [611172.044940] Filesystems sync: 0.006 seconds [611172.052254] Freezing user space processes [611172.059319] Freezing user space processes completed (elapsed 0.001 seconds) [611172.067920] OOM killer disabled. [611172.072465] Freezing remaining freezable tasks [611172.080332] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [611172.089724] printk: Suspending console(s) (use no_console_suspend to debug) [611172.117126] serial 00:03: disabled some other hardware get reconnected [611203.136277] OOM killer enabled. [611203.140637] Restarting tasks ... [611203.141135] usb 1-8.1: USB disconnect, device number 7 [611203.141755] done. [611203.155268] random: crng reseeded on system resumption [611203.162059] PM: suspend exit After investigation, I noticed that for the code block if (write(power_state_fd, "mem", strlen("mem")) != strlen("mem")) ksft_exit_fail_msg("Failed to enter Suspend state\n"); The write will return -1 and errno is set to 16 (device busy). It should be caused by the write function is not successfully returned before the system suspend and the return value get messed when waking up. As a result, It may be better to check the time passed of those few instructions to determine whether the suspend is executed correctly for it is pretty hard to execute those few lines for 5 seconds. The timer to wake up the system is set to expire after 5 seconds and no re-arm. If the timer remaining time is 0 second and 0 nano secomd, it means the timer expired and wake the system up. Otherwise, the system could be considered to enter the suspend state failed if there is any remaining time. After appling this patch, the test would not fail for it believes the system does not go to suspend by mistake. It now could continue to the rest part of the test after suspend. Fixes: bfd092b8c272 ("selftests: breakpoint: add step_after_suspend_test") Reported-by: Sinadin Shan <sinadin.shan@oracle.com> Signed-off-by: Yifei Liu <yifei.l.liu@oracle.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-08perf time-utils: Fix 32-bit nsec parsingIan Rogers
[ Upstream commit 38e2648a81204c9fc5b4c87a8ffce93a6ed91b65 ] The "time utils" test fails in 32-bit builds: ... parse_nsec_time("18446744073.709551615") Failed. ptime 4294967295709551615 expected 18446744073709551615 ... Switch strtoul to strtoull as an unsigned long in 32-bit build isn't 64-bits. Fixes: c284d669a20d408b ("perf tools: Move parse_nsec_time to time-utils.c") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: David Ahern <dsa@cumulusnetworks.com> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Junhao He <hejunhao3@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yang Jihong <yangjihong@bytedance.com> Link: https://lore.kernel.org/r/20240831070415.506194-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-08perf sched timehist: Fixed timestamp error when unable to confirm event ↵Yang Jihong
sched_in time [ Upstream commit 39c243411bdb8fb35777adf49ee32549633c4e12 ] If sched_in event for current task is not recorded, sched_in timestamp will be set to end_time of time window interest, causing an error in timestamp show. In this case, we choose to ignore this event. Test scenario: perf[1229608] does not record the first sched_in event, run time and sch delay are both 0 # perf sched timehist Samples of sched_switch event do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- 2090450.763231 [0000] perf[1229608] 0.000 0.000 0.000 2090450.763235 [0000] migration/0[15] 0.000 0.001 0.003 2090450.763263 [0001] perf[1229608] 0.000 0.000 0.000 2090450.763268 [0001] migration/1[21] 0.000 0.001 0.004 2090450.763302 [0002] perf[1229608] 0.000 0.000 0.000 2090450.763309 [0002] migration/2[27] 0.000 0.001 0.007 2090450.763338 [0003] perf[1229608] 0.000 0.000 0.000 2090450.763343 [0003] migration/3[33] 0.000 0.001 0.004 Before: arbitrarily specify a time window of interest, timestamp will be set to an incorrect value # perf sched timehist --time 100,200 Samples of sched_switch event do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- 200.000000 [0000] perf[1229608] 0.000 0.000 0.000 200.000000 [0001] perf[1229608] 0.000 0.000 0.000 200.000000 [0002] perf[1229608] 0.000 0.000 0.000 200.000000 [0003] perf[1229608] 0.000 0.000 0.000 200.000000 [0004] perf[1229608] 0.000 0.000 0.000 200.000000 [0005] perf[1229608] 0.000 0.000 0.000 200.000000 [0006] perf[1229608] 0.000 0.000 0.000 200.000000 [0007] perf[1229608] 0.000 0.000 0.000 After: # perf sched timehist --time 100,200 Samples of sched_switch event do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- Fixes: 853b74071110bed3 ("perf sched timehist: Add option to specify time window of interest") Signed-off-by: Yang Jihong <yangjihong@bytedance.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsa@cumulusnetworks.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20240819024720.2405244-1-yangjihong@bytedance.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-08perf sched timehist: Fix missing free of session in perf_sched__timehist()Yang Jihong
[ Upstream commit 6bdf5168b6fb19541b0c1862bdaa596d116c7bfb ] When perf_time__parse_str() fails in perf_sched__timehist(), need to free session that was previously created, fix it. Fixes: 853b74071110bed3 ("perf sched timehist: Add option to specify time window of interest") Signed-off-by: Yang Jihong <yangjihong@bytedance.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsa@cumulusnetworks.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20240806023533.1316348-1-yangjihong@bytedance.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-08selftests/bpf: Fix error compiling test_lru_map.cTony Ambardar
[ Upstream commit cacf2a5a78cd1f5f616eae043ebc6f024104b721 ] Although the post-increment in macro 'CPU_SET(next++, &cpuset)' seems safe, the sequencing can raise compile errors, so move the increment outside the macro. This avoids an error seen using gcc 12.3.0 for mips64el/musl-libc: In file included from test_lru_map.c:11: test_lru_map.c: In function 'sched_next_online': test_lru_map.c:129:29: error: operation on 'next' may be undefined [-Werror=sequence-point] 129 | CPU_SET(next++, &cpuset); | ^ cc1: all warnings being treated as errors Fixes: 3fbfadce6012 ("bpf: Fix test_lru_sanity5() in test_lru_map.c") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/22993dfb11ccf27925a626b32672fd3324cb76c4.1722244708.git.tony.ambardar@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-08selftests/bpf: Fix compiling tcp_rtt.c with musl-libcTony Ambardar
[ Upstream commit 18826fb0b79c3c3cd1fe765d85f9c6f1a902c722 ] The GNU version of 'struct tcp_info' in 'netinet/tcp.h' is not exposed by musl headers unless _GNU_SOURCE is defined. Add this definition to fix errors seen compiling for mips64el/musl-libc: tcp_rtt.c: In function 'wait_for_ack': tcp_rtt.c:24:25: error: storage size of 'info' isn't known 24 | struct tcp_info info; | ^~~~ tcp_rtt.c:24:25: error: unused variable 'info' [-Werror=unused-variable] cc1: all warnings being treated as errors Fixes: 1f4f80fed217 ("selftests/bpf: test_progs: convert test_tcp_rtt") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/f2329767b15df206f08a5776d35a47c37da855ae.1721713597.git.tony.ambardar@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-08selftests/bpf: Fix compiling flow_dissector.c with musl-libcTony Ambardar
[ Upstream commit 5e4c43bcb85973243d7274e0058b6e8f5810e4f7 ] The GNU version of 'struct tcphdr' has members 'doff', 'source' and 'dest', which are not exposed by musl libc headers unless _GNU_SOURCE is defined. Add this definition to fix errors seen compiling for mips64el/musl-libc: flow_dissector.c:118:30: error: 'struct tcphdr' has no member named 'doff' 118 | .tcp.doff = 5, | ^~~~ flow_dissector.c:119:30: error: 'struct tcphdr' has no member named 'source' 119 | .tcp.source = 80, | ^~~~~~ flow_dissector.c:120:30: error: 'struct tcphdr' has no member named 'dest' 120 | .tcp.dest = 8080, | ^~~~ Fixes: ae173a915785 ("selftests/bpf: support BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/8f7ab21a73f678f9cebd32b26c444a686e57414d.1721713597.git.tony.ambardar@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-08selftests/bpf: Fix compile error from rlim_t in sk_storage_map.cTony Ambardar
[ Upstream commit d393f9479d4aaab0fa4c3caf513f28685e831f13 ] Cast 'rlim_t' argument to match expected type of printf() format and avoid compile errors seen building for mips64el/musl-libc: In file included from map_tests/sk_storage_map.c:20: map_tests/sk_storage_map.c: In function 'test_sk_storage_map_stress_free': map_tests/sk_storage_map.c:414:56: error: format '%lu' expects argument of type 'long unsigned int', but argument 2 has type 'rlim_t' {aka 'long long unsigned int'} [-Werror=format=] 414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d", | ^~~~~~~~~~~~~~~~~~~~~~~ 415 | rlim_new.rlim_cur, errno); | ~~~~~~~~~~~~~~~~~ | | | rlim_t {aka long long unsigned int} ./test_maps.h:12:24: note: in definition of macro 'CHECK' 12 | printf(format); \ | ^~~~~~ map_tests/sk_storage_map.c:414:68: note: format string is defined here 414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d", | ~~^ | | | long unsigned int | %llu cc1: all warnings being treated as errors Fixes: 51a0e301a563 ("bpf: Add BPF_MAP_TYPE_SK_STORAGE test to test_maps") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/1e00a1fa7acf91b4ca135c4102dc796d518bad86.1721713597.git.tony.ambardar@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-08selftests: breakpoints: Fix a typo of function nameMasami Hiramatsu
commit 5b06eeae52c02dd0d9bc8488275a1207d410870b upstream. Since commit 5821ba969511 ("selftests: Add test plan API to kselftest.h and adjust callers") accidentally introduced 'a' typo in the front of run_test() function, breakpoint_test_arm64.c became not able to be compiled. Remove the 'a' from arun_test(). Fixes: 5821ba969511 ("selftests: Add test plan API to kselftest.h and adjust callers") Reported-by: Jun Takahashi <takahashi.jun_s@aa.socionext.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Kees Cook <keescook@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12libbpf: Add NULL checks to bpf_object__{prev_map,next_map}Andreas Ziegler
[ Upstream commit cedc12c5b57f7efa6dbebfb2b140e8675f5a2616 ] In the current state, an erroneous call to bpf_object__find_map_by_name(NULL, ...) leads to a segmentation fault through the following call chain: bpf_object__find_map_by_name(obj = NULL, ...) -> bpf_object__for_each_map(pos, obj = NULL) -> bpf_object__next_map((obj = NULL), NULL) -> return (obj = NULL)->maps While calling bpf_object__find_map_by_name with obj = NULL is obviously incorrect, this should not lead to a segmentation fault but rather be handled gracefully. As __bpf_map__iter already handles this situation correctly, we can delegate the check for the regular case there and only add a check in case the prev or next parameter is NULL. Signed-off-by: Andreas Ziegler <ziegler.andreas@siemens.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240703083436.505124-1-ziegler.andreas@siemens.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04tools: move alignment-related macros to new <linux/align.h>Alexander Lobakin
commit 10a04ff09bcc39e0044190ffe9f00f998f13647c upstream. Currently, tools have *ALIGN*() macros scattered across the unrelated headers, as there are only 3 of them and they were added separately each time on an as-needed basis. Anyway, let's make it more consistent with the kernel headers and allow using those macros outside of the mentioned headers. Create <linux/align.h> inside the tools/ folder and include it where needed. Signed-off-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04tc-testing: don't access non-existent variable on exceptionSimon Horman
[ Upstream commit a0c9fe5eecc97680323ee83780ea3eaf440ba1b7 ] Since commit 255c1c7279ab ("tc-testing: Allow test cases to be skipped") the variable test_ordinal doesn't exist in call_pre_case(). So it should not be accessed when an exception occurs. This resolves the following splat: ... During handling of the above exception, another exception occurred: Traceback (most recent call last): File ".../tdc.py", line 1028, in <module> main() File ".../tdc.py", line 1022, in main set_operation_mode(pm, parser, args, remaining) File ".../tdc.py", line 966, in set_operation_mode catresults = test_runner_serial(pm, args, alltests) File ".../tdc.py", line 642, in test_runner_serial (index, tsr) = test_runner(pm, args, alltests) File ".../tdc.py", line 536, in test_runner res = run_one_test(pm, args, index, tidx) File ".../tdc.py", line 419, in run_one_test pm.call_pre_case(tidx) File ".../tdc.py", line 146, in call_pre_case print('test_ordinal is {}'.format(test_ordinal)) NameError: name 'test_ordinal' is not defined Fixes: 255c1c7279ab ("tc-testing: Allow test cases to be skipped") Signed-off-by: Simon Horman <horms@kernel.org> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20240815-tdc-test-ordinal-v1-1-0255c122a427@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04bitmap: introduce generic optimized bitmap_size()Alexander Lobakin
commit a37fbe666c016fd89e4460d0ebfcea05baba46dc upstream. The number of times yet another open coded `BITS_TO_LONGS(nbits) * sizeof(long)` can be spotted is huge. Some generic helper is long overdue. Add one, bitmap_size(), but with one detail. BITS_TO_LONGS() uses DIV_ROUND_UP(). The latter works well when both divident and divisor are compile-time constants or when the divisor is not a pow-of-2. When it is however, the compilers sometimes tend to generate suboptimal code (GCC 13): 48 83 c0 3f add $0x3f,%rax 48 c1 e8 06 shr $0x6,%rax 48 8d 14 c5 00 00 00 00 lea 0x0(,%rax,8),%rdx %BITS_PER_LONG is always a pow-2 (either 32 or 64), but GCC still does full division of `nbits + 63` by it and then multiplication by 8. Instead of BITS_TO_LONGS(), use ALIGN() and then divide by 8. GCC: 8d 50 3f lea 0x3f(%rax),%edx c1 ea 03 shr $0x3,%edx 81 e2 f8 ff ff 1f and $0x1ffffff8,%edx Now it shifts `nbits + 63` by 3 positions (IOW performs fast division by 8) and then masks bits[2:0]. bloat-o-meter: add/remove: 0/0 grow/shrink: 20/133 up/down: 156/-773 (-617) Clang does it better and generates the same code before/after starting from -O1, except that with the ALIGN() approach it uses %edx and thus still saves some bytes: add/remove: 0/0 grow/shrink: 9/133 up/down: 18/-538 (-520) Note that we can't expand DIV_ROUND_UP() by adding a check and using this approach there, as it's used in array declarations where expressions are not allowed. Add this helper to tools/ as well. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Acked-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-19selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRTYonghong Song
[ Upstream commit 7015843afcaf68c132784c89528dfddc0005e483 ] Alexei reported that send_signal test may fail with nested CONFIG_PARAVIRT configs. In this particular case, the base VM is AMD with 166 cpus, and I run selftests with regular qemu on top of that and indeed send_signal test failed. I also tried with an Intel box with 80 cpus and there is no issue. The main qemu command line includes: -enable-kvm -smp 16 -cpu host The failure log looks like: $ ./test_progs -t send_signal [ 48.501588] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [test_progs:2225] [ 48.503622] Modules linked in: bpf_testmod(O) [ 48.503622] CPU: 9 PID: 2225 Comm: test_progs Tainted: G O 6.9.0-08561-g2c1713a8f1c9-dirty #69 [ 48.507629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 48.511635] RIP: 0010:handle_softirqs+0x71/0x290 [ 48.511635] Code: [...] 10 0a 00 00 00 31 c0 65 66 89 05 d5 f4 fa 7e fb bb ff ff ff ff <49> c7 c2 cb [ 48.518527] RSP: 0018:ffffc90000310fa0 EFLAGS: 00000246 [ 48.519579] RAX: 0000000000000000 RBX: 00000000ffffffff RCX: 00000000000006e0 [ 48.522526] RDX: 0000000000000006 RSI: ffff88810791ae80 RDI: 0000000000000000 [ 48.523587] RBP: ffffc90000fabc88 R08: 00000005a0af4f7f R09: 0000000000000000 [ 48.525525] R10: 0000000561d2f29c R11: 0000000000006534 R12: 0000000000000280 [ 48.528525] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 48.528525] FS: 00007f2f2885cd00(0000) GS:ffff888237c40000(0000) knlGS:0000000000000000 [ 48.531600] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.535520] CR2: 00007f2f287059f0 CR3: 0000000106a28002 CR4: 00000000003706f0 [ 48.537538] Call Trace: [ 48.537538] <IRQ> [ 48.537538] ? watchdog_timer_fn+0x1cd/0x250 [ 48.539590] ? lockup_detector_update_enable+0x50/0x50 [ 48.539590] ? __hrtimer_run_queues+0xff/0x280 [ 48.542520] ? hrtimer_interrupt+0x103/0x230 [ 48.544524] ? __sysvec_apic_timer_interrupt+0x4f/0x140 [ 48.545522] ? sysvec_apic_timer_interrupt+0x3a/0x90 [ 48.547612] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.547612] ? handle_softirqs+0x71/0x290 [ 48.547612] irq_exit_rcu+0x63/0x80 [ 48.551585] sysvec_apic_timer_interrupt+0x75/0x90 [ 48.552521] </IRQ> [ 48.553529] <TASK> [ 48.553529] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.555609] RIP: 0010:finish_task_switch.isra.0+0x90/0x260 [ 48.556526] Code: [...] 9f 58 0a 00 00 48 85 db 0f 85 89 01 00 00 4c 89 ff e8 53 d9 bd 00 fb 66 90 <4d> 85 ed 74 [ 48.562524] RSP: 0018:ffffc90000fabd38 EFLAGS: 00000282 [ 48.563589] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff83385620 [ 48.563589] RDX: ffff888237c73ae4 RSI: 0000000000000000 RDI: ffff888237c6fd00 [ 48.568521] RBP: ffffc90000fabd68 R08: 0000000000000000 R09: 0000000000000000 [ 48.569528] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8881009d0000 [ 48.573525] R13: ffff8881024e5400 R14: ffff88810791ae80 R15: ffff888237c6fd00 [ 48.575614] ? finish_task_switch.isra.0+0x8d/0x260 [ 48.576523] __schedule+0x364/0xac0 [ 48.577535] schedule+0x2e/0x110 [ 48.578555] pipe_read+0x301/0x400 [ 48.579589] ? destroy_sched_domains_rcu+0x30/0x30 [ 48.579589] vfs_read+0x2b3/0x2f0 [ 48.579589] ksys_read+0x8b/0xc0 [ 48.583590] do_syscall_64+0x3d/0xc0 [ 48.583590] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 48.586525] RIP: 0033:0x7f2f28703fa1 [ 48.587592] Code: [...] 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 80 3d c5 23 14 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 [ 48.593534] RSP: 002b:00007ffd90f8cf88 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 48.595589] RAX: ffffffffffffffda RBX: 00007ffd90f8d5e8 RCX: 00007f2f28703fa1 [ 48.595589] RDX: 0000000000000001 RSI: 00007ffd90f8cfb0 RDI: 0000000000000006 [ 48.599592] RBP: 00007ffd90f8d2f0 R08: 0000000000000064 R09: 0000000000000000 [ 48.602527] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 48.603589] R13: 00007ffd90f8d608 R14: 00007f2f288d8000 R15: 0000000000f6bdb0 [ 48.605527] </TASK> In the test, two processes are communicating through pipe. Further debugging with strace found that the above splat is triggered as read() syscall could not receive the data even if the corresponding write() syscall in another process successfully wrote data into the pipe. The failed subtest is "send_signal_perf". The corresponding perf event has sample_period 1 and config PERF_COUNT_SW_CPU_CLOCK. sample_period 1 means every overflow event will trigger a call to the BPF program. So I suspect this may overwhelm the system. So I increased the sample_period to 100,000 and the test passed. The sample_period 10,000 still has the test failed. In other parts of selftest, e.g., [1], sample_freq is used instead. So I decided to use sample_freq = 1,000 since the test can pass as well. [1] https://lore.kernel.org/bpf/20240604070700.3032142-1-song@kernel.org/ Reported-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240605201203.2603846-1-yonghong.song@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-19libbpf: Fix no-args func prototype BTF dumping syntaxAndrii Nakryiko
[ Upstream commit 189f1a976e426011e6a5588f1d3ceedf71fe2965 ] For all these years libbpf's BTF dumper has been emitting not strictly valid syntax for function prototypes that have no input arguments. Instead of `int (*blah)()` we should emit `int (*blah)(void)`. This is not normally a problem, but it manifests when we get kfuncs in vmlinux.h that have no input arguments. Due to compiler internal specifics, we get no BTF information for such kfuncs, if they are not declared with proper `(void)`. The fix is trivial. We also need to adjust a few ancient tests that happily assumed `()` is correct. Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion") Reported-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://lore.kernel.org/bpf/20240712224442.282823-1-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-19selftests/sigaltstack: Fix ppc64 GCC buildMichael Ellerman
commit 17c743b9da9e0d073ff19fd5313f521744514939 upstream. Building the sigaltstack test with GCC on 64-bit powerpc errors with: gcc -Wall sas.c -o /home/michael/linux/.build/kselftest/sigaltstack/sas In file included from sas.c:23: current_stack_pointer.h:22:2: error: #error "implement current_stack_pointer equivalent" 22 | #error "implement current_stack_pointer equivalent" | ^~~~~ sas.c: In function ‘my_usr1’: sas.c:50:13: error: ‘sp’ undeclared (first use in this function); did you mean ‘p’? 50 | if (sp < (unsigned long)sstack || | ^~ This happens because GCC doesn't define __ppc__ for 64-bit builds, only 32-bit builds. Instead use __powerpc__ to detect powerpc builds, which is defined by clang and GCC for 64-bit and 32-bit builds. Fixes: 05107edc9101 ("selftests: sigaltstack: fix -Wuninitialized") Cc: stable@vger.kernel.org # v6.3+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240520062647.688667-1-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-19tools/memory-model: Fix bug in lock.catAlan Stern
commit 4c830eef806679dc243e191f962c488dd9d00708 upstream. Andrea reported that the following innocuous litmus test: C T {} P0(spinlock_t *x) { int r0; spin_lock(x); spin_unlock(x); r0 = spin_is_locked(x); } gives rise to a nonsensical empty result with no executions: $ herd7 -conf linux-kernel.cfg T.litmus Test T Required States 0 Ok Witnesses Positive: 0 Negative: 0 Condition forall (true) Observation T Never 0 0 Time T 0.00 Hash=6fa204e139ddddf2cb6fa963bad117c0 The problem is caused by a bug in the lock.cat part of the LKMM. Its computation of the rf relation for RU (read-unlocked) events is faulty; it implicitly assumes that every RU event must read from either a UL (unlock) event in another thread or from the lock's initial state. Neither is true in the litmus test above, so the computation yields no possible executions. The lock.cat code tries to make up for this deficiency by allowing RU events outside of critical sections to read from the last po-previous UL event. But it does this incorrectly, trying to keep these rfi links separate from the rfe links that might also be needed, and passing only the latter to herd7's cross() macro. The problem is fixed by merging the two sets of possible rf links for RU events and using them all in the call to cross(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Andrea Parri <parri.andrea@gmail.com> Closes: https://lore.kernel.org/linux-arch/ZlC0IkzpQdeGj+a3@andrea/ Tested-by: Andrea Parri <parri.andrea@gmail.com> Acked-by: Andrea Parri <parri.andrea@gmail.com> Fixes: 15553dcbca06 ("tools/memory-model: Add model support for spin_is_locked()") CC: <stable@vger.kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-19perf report: Fix condition in sort__sym_cmp()Namhyung Kim
[ Upstream commit cb39d05e67dc24985ff9f5150e71040fa4d60ab8 ] It's expected that both hist entries are in the same hists when comparing two. But the current code in the function checks one without dso sort key and other with the key. This would make the condition true in any case. I guess the intention of the original commit was to add '!' for the right side too. But as it should be the same, let's just remove it. Fixes: 69849fc5d2119 ("perf hists: Move sort__has_dso into struct perf_hpp_list") Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240621170528.608772-2-namhyung@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-19selftests: forwarding: devlink_lib: Wait for udev events after reloadingAmit Cohen
[ Upstream commit f67a90a0c8f5b3d0acc18f10650d90fec44775f9 ] Lately, an additional locking was added by commit c0a40097f0bc ("drivers: core: synchronize really_probe() and dev_uevent()"). The locking protects dev_uevent() calling. This function is used to send messages from the kernel to user space. Uevent messages notify user space about changes in device states, such as when a device is added, removed, or changed. These messages are used by udev (or other similar user-space tools) to apply device-specific rules. After reloading devlink instance, udev events should be processed. This locking causes a short delay of udev events handling. One example for useful udev rule is renaming ports. 'forwading.config' can be configured to use names after udev rules are applied. Some tests run devlink_reload() and immediately use the updated names. This worked before the above mentioned commit was pushed, but now the delay of uevent messages causes that devlink_reload() returns before udev events are handled and tests fail. Adjust devlink_reload() to not assume that udev events are already processed when devlink reload is done, instead, wait for udev events to ensure they are processed before returning from the function. Without this patch: TESTS='rif_mac_profile' ./resource_scale.sh TEST: 'rif_mac_profile' 4 [ OK ] sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory Cannot find device "swp1" Cannot find device "swp2" TEST: setup_wait_dev (: Interface swp1 does not come up.) [FAIL] With this patch: $ TESTS='rif_mac_profile' ./resource_scale.sh TEST: 'rif_mac_profile' 4 [ OK ] TEST: 'rif_mac_profile' overflow 5 [ OK ] This is relevant not only for this test. Fixes: bc7cbb1e9f4c ("selftests: forwarding: Add devlink_lib.sh") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/89367666e04b38a8993027f1526801ca327ab96a.1720709333.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-19selftests/bpf: Check length of recv in test_sockmapGeliang Tang
[ Upstream commit de1b5ea789dc28066cc8dc634b6825bd6148f38b ] The value of recv in msg_loop may be negative, like EWOULDBLOCK, so it's necessary to check if it is positive before accumulating it to bytes_recvd. Fixes: 16962b2404ac ("bpf: sockmap, add selftests") Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/5172563f7c7b2a2e953cef02e89fc34664a7b190.1716446893.git.tanggeliang@kylinos.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-27selftests/vDSO: fix clang build errors and warningsJohn Hubbard
[ Upstream commit 73810cd45b99c6c418e1c6a487b52c1e74edb20d ] When building with clang, via: make LLVM=1 -C tools/testing/selftests ...there are several warnings, and an error. This fixes all of those and allows these tests to run and pass. 1. Fix linker error (undefined reference to memcpy) by providing a local version of memcpy. 2. clang complains about using this form: if (g = h & 0xf0000000) ...so factor out the assignment into a separate step. 3. The code is passing a signed const char* to elf_hash(), which expects a const unsigned char *. There are several callers, so fix this at the source by allowing the function to accept a signed argument, and then converting to unsigned operations, once inside the function. 4. clang doesn't have __attribute__((externally_visible)) and generates a warning to that effect. Fortunately, gcc 12 and gcc 13 do not seem to require that attribute in order to build, run and pass tests here, so remove it. Reviewed-by: Carlos Llamas <cmllamas@google.com> Reviewed-by: Edward Liaw <edliaw@google.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-18selftests: make order checking verbose in msg_zerocopy selftestZijian Zhang
[ Upstream commit 7d6d8f0c8b700c9493f2839abccb6d29028b4219 ] We find that when lock debugging is on, notifications may not come in order. Thus, we have order checking outputs managed by cfg_verbose, to avoid too many outputs in this case. Fixes: 07b65c5b31ce ("test: add msg_zerocopy test") Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Signed-off-by: Xiaochun Lu <xiaochun.lu@bytedance.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240701225349.3395580-3-zijianzhang@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-18selftests: fix OOM in msg_zerocopy selftestZijian Zhang
[ Upstream commit af2b7e5b741aaae9ffbba2c660def434e07aa241 ] In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg on a socket with MSG_ZEROCOPY flag, and it will recv the notifications until the socket is not writable. Typically, it will start the receiving process after around 30+ sendmsgs. However, as the introduction of commit dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is always writable and does not get any chance to run recv notifications. The selftest always exits with OUT_OF_MEMORY because the memory used by opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a different value to trigger OOM on older kernels too. Thus, we introduce "cfg_notification_limit" to force sender to receive notifications after some number of sendmsgs. Fixes: 07b65c5b31ce ("test: add msg_zerocopy test") Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Signed-off-by: Xiaochun Lu <xiaochun.lu@bytedance.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240701225349.3395580-2-zijianzhang@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-05selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.shAlessandro Carminati (Red Hat)
[ Upstream commit f803bcf9208a2540acb4c32bdc3616673169f490 ] In some systems, the netcat server can incur in delay to start listening. When this happens, the test can randomly fail in various points. This is an example error message: # ip gre none gso # encap 192.168.1.1 to 192.168.1.2, type gre, mac none len 2000 # test basic connectivity # Ncat: Connection refused. The issue stems from a race condition between the netcat client and server. The test author had addressed this problem by implementing a sleep, which I have removed in this patch. This patch introduces a function capable of sleeping for up to two seconds. However, it can terminate the waiting period early if the port is reported to be listening. Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240314105911.213411-1-alessandro.carminati@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-05hugetlb_encode.h: fix undefined behaviour (34 << 26)Matthias Goergens
commit 710bb68c2e3a24512e2d2bae470960d7488e97b1 upstream. Left-shifting past the size of your datatype is undefined behaviour in C. The literal 34 gets the type `int`, and that one is not big enough to be left shifted by 26 bits. An `unsigned` is long enough (on any machine that has at least 32 bits for their ints.) For uniformity, we mark all the literals as unsigned. But it's only really needed for HUGETLB_FLAG_ENCODE_16GB. Thanks to Randy Dunlap for an initial review and suggestion. Link: https://lkml.kernel.org/r/20220905031904.150925-1-matthias.goergens@gmail.com Signed-off-by: Matthias Goergens <matthias.goergens@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [cmllamas: fix trivial conflict due to missing page encondigs] Signed-off-by: Carlos Llamas <cmllamas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 05:25:11 +0000