| Age | Commit message (Collapse) | Author |
|---|
|
Successful syscalls don't change errno, so checking errno is wrong
to ensure that a syscall has failed. For example for the following
sequence:
prctl(PR_SET_SYSCALL_USER_DISPATCH, op, 0x0, 0xff, 0);
EXPECT_EQ(EINVAL, errno);
prctl(PR_SET_SYSCALL_USER_DISPATCH, op, 0x0, 0x0, &sel);
EXPECT_EQ(EINVAL, errno);
only the first syscall may fail and set errno, but the second may succeed
and keep errno intact, and the check will falsely pass.
Or if errno happened to be EINVAL before, even the first check may falsely
pass.
Also use EXPECT/ASSERT consistently. Currently there is an inconsistent mix
without obvious reasons for usage of one or another.
Fixes: 179ef035992e ("selftests: Add kselftest for syscall user dispatch")
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/af6a04dbfef9af8570f5bab43e3ef1416b62699a.1747839857.git.dvyukov@google.com
|
|
Nested file systems, that is those which invoke call_mmap() within their
own f_op->mmap() handlers, may encounter underlying file systems which
provide the f_op->mmap_prepare() hook introduced by commit c84bf6dd2b83
("mm: introduce new .mmap_prepare() file callback").
We have a chicken-and-egg scenario here - until all file systems are
converted to using .mmap_prepare(), we cannot convert these nested
handlers, as we can't call f_op->mmap from an .mmap_prepare() hook.
So we have to do it the other way round - invoke the .mmap_prepare() hook
from an .mmap() one.
in order to do so, we need to convert VMA state into a struct vm_area_desc
descriptor, invoking the underlying file system's f_op->mmap_prepare()
callback passing a pointer to this, and then setting VMA state accordingly
and safely.
This patch achieves this via the compat_vma_mmap_prepare() function, which
we invoke from call_mmap() if f_op->mmap_prepare() is specified in the
passed in file pointer.
We place the fundamental logic into mm/vma.h where VMA manipulation
belongs. We also update the VMA userland tests to accommodate the
changes.
The compat_vma_mmap_prepare() function and its associated machinery is
temporary, and will be removed once the conversion of file systems is
complete.
We carefully place this code so it can be used with CONFIG_MMU and also
with cutting edge nommu silicon.
[akpm@linux-foundation.org: export compat_vma_mmap_prepare tp fix build]
[lorenzo.stoakes@oracle.com: remove unused declarations]
Link: https://lkml.kernel.org/r/ac3ae324-4c65-432a-8c6d-2af988b18ac8@lucifer.local
Link: https://lkml.kernel.org/r/20250609165749.344976-1-lorenzo.stoakes@oracle.com
Fixes: c84bf6dd2b83 ("mm: introduce new .mmap_prepare() file callback").
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Closes: https://lore.kernel.org/linux-mm/CAG48ez04yOEVx1ekzOChARDDBZzAKwet8PEoPM4Ln3_rk91AzQ@mail.gmail.com/
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On arm64 with 64KB page size, the selftest xdp_do_redirect failed like
below:
...
test_xdp_do_redirect:PASS:pkt_count_tc 0 nsec
test_max_pkt_size:PASS:prog_run_max_size 0 nsec
test_max_pkt_size:FAIL:prog_run_too_big unexpected prog_run_too_big: actual -28 != expected -22
With 64KB page size, the xdp frame size will be much bigger so
the existing test will fail.
Adjust various parameters so the test can also work on 64K page size.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250612035042.2208630-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When running BPF selftests on arm64 with a 64K page size, I encountered
the following two test failures:
sockmap_basic/sockmap skb_verdict change tail:FAIL
tc_change_tail:FAIL
With further debugging, I identified the root cause in the following
kernel code within __bpf_skb_change_tail():
u32 max_len = BPF_SKB_MAX_LEN;
u32 min_len = __bpf_skb_min_len(skb);
int ret;
if (unlikely(flags || new_len > max_len || new_len < min_len))
return -EINVAL;
With a 4K page size, new_len = 65535 and max_len = 16064, the function
returns -EINVAL. However, With a 64K page size, max_len increases to
261824, allowing execution to proceed further in the function. This is
because BPF_SKB_MAX_LEN scales with the page size and larger page sizes
result in higher max_len values.
Updating the new_len parameter in both tests based on actual kernel
page size resolved both failures.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250612035037.2207911-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The bpf selftest xdp_adjust_tail/xdp_adjust_frags_tail_grow failed on
arm64 with 64KB page:
xdp_adjust_tail/xdp_adjust_frags_tail_grow:FAIL
In bpf_prog_test_run_xdp(), the xdp->frame_sz is set to 4K, but later on
when constructing frags, with 64K page size, the frag data_len could
be more than 4K. This will cause problems in bpf_xdp_frags_increase_tail().
To fix the failure, the xdp->frame_sz is set to be PAGE_SIZE so kernel
can test different page size properly. With the kernel change, the user
space and bpf prog needs adjustment. Currently, the MAX_SKB_FRAGS default
value is 17, so for 4K page, the maximum packet size will be less than 68K.
To test 64K page, a bigger maximum packet size than 68K is desired. So two
different functions are implemented for subtest xdp_adjust_frags_tail_grow.
Depending on different page size, different data input/output sizes are used
to adapt with different page size.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250612035032.2207498-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Spelling fix:
conneciton --> connection
This is a non-functional change aimed at improving code clarity.
Signed-off-by: Ankit Chauhan <ankitchauhan2065@gmail.com>
Link: https://patch.msgid.link/20250610071903.67180-1-ankitchauhan2065@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When xsend() returns -1 (error), the check 'n < sizeof(buf)' incorrectly
treats it as success due to unsigned promotion. Explicitly check for -1
first.
Fixes: a4b7193d8efd ("selftests/bpf: Add sockmap test for redirecting partial skb data")
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Link: https://lore.kernel.org/r/20250612084208.27722-1-wangfushuai@baidu.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The test case absent_mark_in_the_middle_state is equivalent of the
following C program:
1: r8 = bpf_get_prandom_u32();
2: r6 = -32;
3: bpf_iter_num_new(&fp[-8], 0, 10);
4: if (unlikely(bpf_get_prandom_u32()))
5: r6 = -31;
6: for (;;) {
7: if (!bpf_iter_num_next(&fp[-8]))
8: break;
9: if (unlikely(bpf_get_prandom_u32()))
10: *(u64 *)(fp + r6) = 7;
11: }
12: bpf_iter_num_destroy(&fp[-8]);
13: return 0;
W/o a fix that instructs verifier to ignore branches count for loop
entries verification proceeds as follows:
- 1-4, state is {r6=-32,fp-8=active};
- 6, checkpoint A is created with {r6=-32,fp-8=active};
- 7, checkpoint B is created with {r6=-32,fp-8=active},
push state {r6=-32,fp-8=active} from 7 to 9;
- 8,12,13, {r6=-32,fp-8=drained}, exit;
- pop state with {r6=-32,fp-8=active} from 7 to 9;
- 9, push state {r6=-32,fp-8=active} from 9 to 10;
- 6, checkpoint C is created with {r6=-32,fp-8=active};
- 7, checkpoint A is hit, no precision propagated for r6 to C;
- pop state {r6=-32,fp-8=active} from 9 to 10;
- 10, state is {r6=-31,fp-8=active}, r6 is marked as read and precise,
these marks are propagated to checkpoints A and B (but not C, as
it is not the parent of current state;
- 6, {r6=-31,fp-8=active} checkpoint C is hit, because r6 is not
marked precise for this checkpoint;
- the program is accepted, despite a possibility of unaligned u64
stack access at offset -31.
The test case absent_mark_in_the_middle_state2 is similar except the
following change:
r8 = bpf_get_prandom_u32();
r6 = -32;
bpf_iter_num_new(&fp[-8], 0, 10);
if (unlikely(bpf_get_prandom_u32())) {
r6 = -31;
+ jump_into_loop:
+ goto +0;
+ goto loop;
+ }
+ if (unlikely(bpf_get_prandom_u32()))
+ goto jump_into_loop;
+ loop:
for (;;) {
if (!bpf_iter_num_next(&fp[-8]))
break;
if (unlikely(bpf_get_prandom_u32()))
*(u64 *)(fp + r6) = 7;
}
bpf_iter_num_destroy(&fp[-8])
return 0
The goal is to check that read/precision marks are propagated to
checkpoint created at 'goto +0' that resides outside of the loop.
The test case absent_mark_in_the_middle_state3 is a bit different and
is equivalent to the C program below:
int absent_mark_in_the_middle_state3(void)
{
bpf_iter_num_new(&fp[-8], 0, 10)
loop1(-32, &fp[-8])
loop1_wrapper(&fp[-8])
bpf_iter_num_destroy(&fp[-8])
}
int loop1(num, iter)
{
while (bpf_iter_num_next(iter)) {
if (unlikely(bpf_get_prandom_u32()))
*(fp + num) = 7;
}
return 0
}
int loop1_wrapper(iter)
{
r6 = -32;
if (unlikely(bpf_get_prandom_u32()))
r6 = -31;
loop1(r6, iter);
return 0;
}
The unsafe state is reached in a similar manner, but the loop is
located inside a subprogram that is called from two locations in the
main subprogram. This detail is important for exercising
bpf_scc_visit->backedges memory management.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250611200836.4135542-11-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc2).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent
invalid routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused
transient packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple
requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set"
* tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context
net: ethtool: Don't check if RSS context exists in case of context 0
af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.
ipv6: Move fib6_config_validate() to ip6_route_add().
net: drv: netdevsim: don't napi_complete() from netpoll
net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()
veth: prevent NULL pointer dereference in veth_xdp_rcv
net_sched: remove qdisc_tree_flush_backlog()
net_sched: ets: fix a race in ets_qdisc_change()
net_sched: tbf: fix a race in tbf_change()
net_sched: red: fix a race in __red_change()
net_sched: prio: fix a race in prio_tune()
net_sched: sch_sfq: reject invalid perturb period
net: phy: phy_caps: Don't skip better duplex macth on non-exact match
MAINTAINERS: Update Kuniyuki Iwashima's email address.
selftests: net: add test case for NAT46 looping back dst
net: clear the dst when changing skb protocol
net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper
net/mlx5e: Fix leak of Geneve TLV option object
net/mlx5: HWS, make sure the uplink is the last destination
...
|
|
context
Add test_rss_default_context_rule() to verify that ntuple rules can
correctly direct traffic to the default RSS context (context 0).
The test creates two ntuple rules with explicit location priorities:
- A high-priority rule (loc 0) directing specific port traffic to
context 0.
- A low-priority rule (loc 1) directing all other TCP traffic to context
1.
This validates that:
1. Rules targeting the default context function properly.
2. Traffic steering works as expected when mixing default and
additional RSS contexts.
The test was written by AI, and reviewed by humans.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250612071958.1696361-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This adds extensive tests for the coredump server.
Link: https://lore.kernel.org/20250603-work-coredump-socket-protocol-v2-5-05a5f0c18ecc@kernel.org
Acked-by: Lennart Poettering <lennart@poettering.net>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Make the selftests we added this cycle easier to read.
Link: https://lore.kernel.org/20250603-work-coredump-socket-protocol-v2-3-05a5f0c18ecc@kernel.org
Acked-by: Lennart Poettering <lennart@poettering.net>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix various warnings in the selftest build.
Link: https://lore.kernel.org/20250603-work-coredump-socket-protocol-v2-2-05a5f0c18ecc@kernel.org
Acked-by: Lennart Poettering <lennart@poettering.net>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Unlike the other cases gup_longterm's memfd tests previously skipped the
test when failing to set up the file descriptor to test. Restore this
behavior to avoid hitting failures when hugetlb isn't configured.
Link: https://lkml.kernel.org/r/20250605-selftest-mm-gup-longterm-tweaks-v1-1-2fae34b05958@kernel.org
Fixes: 66bce7afbaca ("selftests/mm: fix test result reporting in gup_longterm")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reported-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Closes: https://lkml.kernel.org/r/a76fc252-0fe3-4d4b-a9a1-4a2895c2680d@lucifer.local
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Simple test for crash involving multicast loopback and stale dst.
Reuse exising NAT46 program.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250610001245.1981782-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit introduces a new vmtest.sh runner for vsock.
It uses virtme-ng/qemu to run tests in a VM. The tests validate G2H,
H2G, and loopback. The testing tools from tools/testing/vsock/ are
reused. Currently, only vsock_test is used.
VMCI and hyperv support is included in the config file to be built with
the -b option, though not used in the tests.
Only tested on x86.
To run:
$ make -C tools/testing/selftests TARGETS=vsock
$ tools/testing/selftests/vsock/vmtest.sh
or
$ make -C tools/testing/selftests TARGETS=vsock run_tests
Example runs (after make -C tools/testing/selftests TARGETS=vsock):
$ ./tools/testing/selftests/vsock/vmtest.sh
1..3
ok 0 vm_server_host_client
ok 1 vm_client_host_server
ok 2 vm_loopback
SUMMARY: PASS=3 SKIP=0 FAIL=0
Log: /tmp/vsock_vmtest_m7DI.log
$ ./tools/testing/selftests/vsock/vmtest.sh vm_loopback
1..1
ok 0 vm_loopback
SUMMARY: PASS=1 SKIP=0 FAIL=0
Log: /tmp/vsock_vmtest_a1IO.log
$ mkdir -p ~/scratch
$ make -C tools/testing/selftests install TARGETS=vsock INSTALL_PATH=~/scratch
[... omitted ...]
$ cd ~/scratch
$ ./run_kselftest.sh
TAP version 13
1..1
# timeout set to 300
# selftests: vsock: vmtest.sh
# 1..3
# ok 0 vm_server_host_client
# ok 1 vm_client_host_server
# ok 2 vm_loopback
# SUMMARY: PASS=3 SKIP=0 FAIL=0
# Log: /tmp/vsock_vmtest_svEl.log
ok 1 selftests: vsock: vmtest.sh
Future work can include vsock_diag_test.
Because vsock requires a VM to test anything other than loopback, this
patch adds vmtest.sh as a kselftest itself. This is different than other
systems that have a "vmtest.sh", where it is used as a utility script to
spin up a VM to run the selftests as a guest (but isn't hooked into
kselftest).
Signed-off-by: Bobby Eshleman <bobbyeshleman@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250609-vsock-vmtest-v10-1-7f37198e1cd4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On arm64, the cgroup_mprog_ordering selftest failed with test_progs run
when building with clang compiler. The reason is due to socklen_t optlen
not initialized.
In kernel function do_ip_getsockopt(), we have
if (copy_from_sockptr(&len, optlen, sizeof(int)))
return -EFAULT;
if (len < 0)
return -EINVAL;
The above 'len' variable is a negative value and hence the test failed.
But the test is okay on x86_64. I checked the x86_64 asm code and I didn't
see explicit initialization of 'optlen' but its value is 0 so kernel
didn't return error. This should be a pure luck.
Fix the bug by initializing 'oplen' var properly.
Fixes: e422d5f118e4 ("selftests/bpf: Add two selftests for mprog API based cgroup progs")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250611162103.1623692-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.16, take #2
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
|
|
The selftest can reproduce an issue where using bpf_msg_pop_data() in
ktls causes errors on the receiving end.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20250609020910.397930-3-jiayuan.chen@linux.dev
|
|
Most of the packetdrill tests have not flaked once last week.
Add the few which did to the XFAIL list.
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250610000001.1970934-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Once the THREADED napi is disabled, the napi kthread should also be
stopped. Keeping the kthread intact after disabling THREADED napi makes
the PID of this kthread show up in the output of netlink 'napi-get' and
ps -ef output.
The is discussed in the patch below:
https://lore.kernel.org/all/20250502191548.559cc416@kernel.org
NAPI kthread should stop only if,
- There are no pending napi poll scheduled for this thread.
- There are no new napi poll scheduled for this thread while it has
stopped.
- The ____napi_schedule can correctly fallback to the softirq for napi
polling.
Since napi_schedule_prep provides mutual exclusion over STATE_SCHED bit,
it is safe to unset the STATE_THREADED when SCHED_THREADED is set or the
SCHED bit is not set. SCHED_THREADED being set means that SCHED is
already set and the kthread owns this napi.
To disable threaded napi, unset STATE_THREADED bit safely if
SCHED_THREADED is set or SCHED is unset. Once STATE_THREADED is unset
safely then wait for the kthread to unset the SCHED_THREADED bit so it
safe to stop the kthread.
Add a new test in nl_netdev to verify this behaviour.
Tested:
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..6
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.nsim_rxq_reset_down
# Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0
Ran neper for 300 seconds and did enable/disable of thread napi in a
loop continuously.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250609173015.3851695-1-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the netconsole selftest to validate both basic and extended
target formats. The basic format is a simpler variant that doesn't
support userdata or release functionality.
The test now validates that netconsole works correctly in both
configurations, improving test coverage for different netconsole
deployment scenarios.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250609-netcons_ext-v3-4-5336fa670326@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the exit call from validate_result() function and move the
test exit logic to the main script. This allows the function to
be reused in scenarios where the test needs to continue execution
after validation, rather than terminating immediately.
The validate_result() function should focus on validation logic
only, while the calling script maintains control over program
flow and exit conditions. This change improves code modularity
and prepares for potential future enhancements where multiple
validations might be needed in a single test run.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250609-netcons_ext-v3-3-5336fa670326@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nolibc only supports symbol-based stackprotectors, based on the global
variable __stack_chk_guard. Support for this differs between
architectures and toolchains. Some use the symbol mode by default, some
require a flag to enable it and some don't support it at all.
Before the nolibc test Makefile required the availability of
"-mstack-protector-guard=global" to enable stackprotectors.
While this flag makes sure that the correct mode is available it doesn't
work where the correct mode is the only supported one and therefore the
flag is not implemented.
Switch to a more dynamic probing mechanism.
This correctly enables stack protectors for mips, loongarch and m68k.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250609-nolibc-stackprotector-robust-v1-1-a1cfc92a568a@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is based on the gadget from the description of commit 9183671af6db
("bpf: Fix leakage under speculation on mispredicted branches").
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250603212814.338867-1-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This implements the core of the series and causes the verifier to fall
back to mitigating Spectre v1 using speculation barriers. The approach
was presented at LPC'24 [1] and RAID'24 [2].
If we find any forbidden behavior on a speculative path, we insert a
nospec (e.g., lfence speculation barrier on x86) before the instruction
and stop verifying the path. While verifying a speculative path, we can
furthermore stop verification of that path whenever we encounter a
nospec instruction.
A minimal example program would look as follows:
A = true
B = true
if A goto e
f()
if B goto e
unsafe()
e: exit
There are the following speculative and non-speculative paths
(`cur->speculative` and `speculative` referring to the value of the
push_stack() parameters):
- A = true
- B = true
- if A goto e
- A && !cur->speculative && !speculative
- exit
- !A && !cur->speculative && speculative
- f()
- if B goto e
- B && cur->speculative && !speculative
- exit
- !B && cur->speculative && speculative
- unsafe()
If f() contains any unsafe behavior under Spectre v1 and the unsafe
behavior matches `state->speculative &&
error_recoverable_with_nospec(err)`, do_check() will now add a nospec
before f() instead of rejecting the program:
A = true
B = true
if A goto e
nospec
f()
if B goto e
unsafe()
e: exit
Alternatively, the algorithm also takes advantage of nospec instructions
inserted for other reasons (e.g., Spectre v4). Taking the program above
as an example, speculative path exploration can stop before f() if a
nospec was inserted there because of Spectre v4 sanitization.
In this example, all instructions after the nospec are dead code (and
with the nospec they are also dead code speculatively).
For this, it relies on the fact that speculation barriers generally
prevent all later instructions from executing if the speculation was not
correct:
* On Intel x86_64, lfence acts as full speculation barrier, not only as
a load fence [3]:
An LFENCE instruction or a serializing instruction will ensure that
no later instructions execute, even speculatively, until all prior
instructions complete locally. [...] Inserting an LFENCE instruction
after a bounds check prevents later operations from executing before
the bound check completes.
This was experimentally confirmed in [4].
* On AMD x86_64, lfence is dispatch-serializing [5] (requires MSR
C001_1029[1] to be set if the MSR is supported, this happens in
init_amd()). AMD further specifies "A dispatch serializing instruction
forces the processor to retire the serializing instruction and all
previous instructions before the next instruction is executed" [8]. As
dispatch is not specific to memory loads or branches, lfence therefore
also affects all instructions there. Also, if retiring a branch means
it's PC change becomes architectural (should be), this means any
"wrong" speculation is aborted as required for this series.
* ARM's SB speculation barrier instruction also affects "any instruction
that appears later in the program order than the barrier" [6].
* PowerPC's barrier also affects all subsequent instructions [7]:
[...] executing an ori R31,R31,0 instruction ensures that all
instructions preceding the ori R31,R31,0 instruction have completed
before the ori R31,R31,0 instruction completes, and that no
subsequent instructions are initiated, even out-of-order, until
after the ori R31,R31,0 instruction completes. The ori R31,R31,0
instruction may complete before storage accesses associated with
instructions preceding the ori R31,R31,0 instruction have been
performed
Regarding the example, this implies that `if B goto e` will not execute
before `if A goto e` completes. Once `if A goto e` completes, the CPU
should find that the speculation was wrong and continue with `exit`.
If there is any other path that leads to `if B goto e` (and therefore
`unsafe()`) without going through `if A goto e`, then a nospec will
still be needed there. However, this patch assumes this other path will
be explored separately and therefore be discovered by the verifier even
if the exploration discussed here stops at the nospec.
This patch furthermore has the unfortunate consequence that Spectre v1
mitigations now only support architectures which implement BPF_NOSPEC.
Before this commit, Spectre v1 mitigations prevented exploits by
rejecting the programs on all architectures. Because some JITs do not
implement BPF_NOSPEC, this patch therefore may regress unpriv BPF's
security to a limited extent:
* The regression is limited to systems vulnerable to Spectre v1, have
unprivileged BPF enabled, and do NOT emit insns for BPF_NOSPEC. The
latter is not the case for x86 64- and 32-bit, arm64, and powerpc
64-bit and they are therefore not affected by the regression.
According to commit a6f6a95f2580 ("LoongArch, bpf: Fix jit to skip
speculation barrier opcode"), LoongArch is not vulnerable to Spectre
v1 and therefore also not affected by the regression.
* To the best of my knowledge this regression may therefore only affect
MIPS. This is deemed acceptable because unpriv BPF is still disabled
there by default. As stated in a previous commit, BPF_NOSPEC could be
implemented for MIPS based on GCC's speculation_barrier
implementation.
* It is unclear which other architectures (besides x86 64- and 32-bit,
ARM64, PowerPC 64-bit, LoongArch, and MIPS) supported by the kernel
are vulnerable to Spectre v1. Also, it is not clear if barriers are
available on these architectures. Implementing BPF_NOSPEC on these
architectures therefore is non-trivial. Searching GCC and the kernel
for speculation barrier implementations for these architectures
yielded no result.
* If any of those regressed systems is also vulnerable to Spectre v4,
the system was already vulnerable to Spectre v4 attacks based on
unpriv BPF before this patch and the impact is therefore further
limited.
As an alternative to regressing security, one could still reject
programs if the architecture does not emit BPF_NOSPEC (e.g., by removing
the empty BPF_NOSPEC-case from all JITs except for LoongArch where it
appears justified). However, this will cause rejections on these archs
that are likely unfounded in the vast majority of cases.
In the tests, some are now successful where we previously had a
false-positive (i.e., rejection). Change them to reflect where the
nospec should be inserted (using __xlated_unpriv) and modify the error
message if the nospec is able to mitigate a problem that previously
shadowed another problem (in that case __xlated_unpriv does not work,
therefore just add a comment).
Define SPEC_V1 to avoid duplicating this ifdef whenever we check for
nospec insns using __xlated_unpriv, define it here once. This also
improves readability. PowerPC can probably also be added here. However,
omit it for now because the BPF CI currently does not include a test.
Limit it to EPERM, EACCES, and EINVAL (and not everything except for
EFAULT and ENOMEM) as it already has the desired effect for most
real-world programs. Briefly went through all the occurrences of EPERM,
EINVAL, and EACCESS in verifier.c to validate that catching them like
this makes sense.
Thanks to Dustin for their help in checking the vendor documentation.
[1] https://lpc.events/event/18/contributions/1954/ ("Mitigating
Spectre-PHT using Speculation Barriers in Linux eBPF")
[2] https://arxiv.org/pdf/2405.00078 ("VeriFence: Lightweight and
Precise Spectre Defenses for Untrusted Linux Kernel Extensions")
[3] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/runtime-speculative-side-channel-mitigations.html
("Managed Runtime Speculative Execution Side Channel Mitigations")
[4] https://dl.acm.org/doi/pdf/10.1145/3359789.3359837 ("Speculator: a
tool to analyze speculative execution attacks and mitigations" -
Section 4.6 "Stopping Speculative Execution")
[5] https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/programmer-references/software-techniques-for-managing-speculation.pdf
("White Paper - SOFTWARE TECHNIQUES FOR MANAGING SPECULATION ON AMD
PROCESSORS - REVISION 5.09.23")
[6] https://developer.arm.com/documentation/ddi0597/2020-12/Base-Instructions/SB--Speculation-Barrier-
("SB - Speculation Barrier - Arm Armv8-A A32/T32 Instruction Set
Architecture (2020-12)")
[7] https://wiki.raptorcs.com/w/images/5/5f/OPF_PowerISA_v3.1C.pdf
("Power ISA™ - Version 3.1C - May 26, 2024 - Section 9.2.1 of Book
III")
[8] https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/programmer-references/40332.pdf
("AMD64 Architecture Programmer’s Manual Volumes 1–5 - Revision 4.08
- April 2024 - 7.6.4 Serializing Instructions")
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Henriette Herzog <henriette.herzog@rub.de>
Cc: Dustin Nguyen <nguyen@cs.fau.de>
Cc: Maximilian Ott <ott@cs.fau.de>
Cc: Milan Stephan <milan.stephan@fau.de>
Link: https://lore.kernel.org/r/20250603212428.338473-1-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding tests for getting cookie with fill_link_info for tracing.
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250606165818.3394397-2-chen.dylane@linux.dev
|
|
A test requires the following to happen:
* CONST_PTR_TO_MAP value is checked for null
* the code in the null branch fails verification
Add test cases:
* direct global map_ptr comparison to null
* lookup inner map, then two checks (the first transforms
map_value_or_null into map_ptr)
* lookup inner map, spill-fill it, then check for null
* use an array of ringbufs to recreate a common coding pattern [1]
[1] https://lore.kernel.org/bpf/CAEf4BzZNU0gX_sQ8k8JaLe1e+Veth3Rk=4x7MDhv=hQxvO8EDw@mail.gmail.com/
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ihor Solodrai <isolodrai@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250609183024.359974-4-isolodrai@meta.com
|
|
Add a test for CONST_PTR_TO_MAP comparison with a non-0 constant. A
BPF program with this code must not pass verification in unpriv.
Signed-off-by: Ihor Solodrai <isolodrai@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250609183024.359974-3-isolodrai@meta.com
|
|
When reg->type is CONST_PTR_TO_MAP, it can not be null. However the
verifier explores the branches under rX == 0 in check_cond_jmp_op()
even if reg->type is CONST_PTR_TO_MAP, because it was not checked for
in reg_not_null().
Fix this by adding CONST_PTR_TO_MAP to the set of types that are
considered non nullable in reg_not_null().
An old "unpriv: cmp map pointer with zero" selftest fails with this
change, because now early out correctly triggers in
check_cond_jmp_op(), making the verification to pass.
In practice verifier may allow pointer to null comparison in unpriv,
since in many cases the relevant branch and comparison op are removed
as dead code. So change the expected test result to __success_unpriv.
Signed-off-by: Ihor Solodrai <isolodrai@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250609183024.359974-2-isolodrai@meta.com
|
|
Two tests are added:
- cgroup_mprog_opts, which mimics tc_opts.c ([1]). Both prog and link
attach are tested. Some negative tests are also included.
- cgroup_mprog_ordering, which actually runs the program with some mprog
API flags.
[1] https://github.com/torvalds/linux/blob/master/tools/testing/selftests/bpf/prog_tests/tc_opts.c
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250606163156.2429955-1-yonghong.song@linux.dev
|
|
Move static inline functions id_from_prog_fd() and id_from_link_fd()
from prog_tests/tc_helpers.h to test_progs.h so these two functions
can be reused for later cgroup mprog selftests.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250606163151.2429325-1-yonghong.song@linux.dev
|
|
When FRED is enabled, if the Trap Flag (TF) is set without an external
debugger attached, it can lead to an infinite loop in the SIGTRAP
handler. To avoid this, the software event flag in the augmented SS
must be cleared, ensuring that no single-step trap remains pending when
ERETU completes.
This test checks for that specific scenario—verifying whether the kernel
correctly prevents an infinite SIGTRAP loop in this edge case when FRED
is enabled.
The test should _always_ pass with IDT event delivery, thus no need to
disable the test even when FRED is not enabled.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250609084054.2083189-3-xin%40zytor.com
|
|
Pull mount fixes from Al Viro:
"Various mount-related bugfixes:
- split the do_move_mount() checks in subtree-of-our-ns and
entire-anon cases and adapt detached mount propagation selftest for
mount_setattr
- allow clone_private_mount() for a path on real rootfs
- fix a race in call of has_locked_children()
- fix move_mount propagation graph breakage by MOVE_MOUNT_SET_GROUP
- make sure clone_private_mnt() caller has CAP_SYS_ADMIN in the right
userns
- avoid false negatives in path_overmount()
- don't leak MNT_LOCKED from parent to child in finish_automount()
- do_change_type(): refuse to operate on unmounted/not ours mounts"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_change_type(): refuse to operate on unmounted/not ours mounts
clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
selftests/mount_setattr: adapt detached mount propagation test
do_move_mount(): split the checks in subtree-of-our-ns and entire-anon cases
fs: allow clone_private_mount() for a path on real rootfs
fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2)
finish_automount(): don't leak MNT_LOCKED from parent to child
path_overmount(): avoid false negatives
fs/fhandle.c: fix a race in call of has_locked_children()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
"The series 'Fix uprobe pte be overwritten when expanding vma' fixes a
longstanding and quite obscure bug related to the vma merging of the
uprobe mmap page"
* tag 'mm-stable-2025-06-06-16-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftests/mm: add test about uprobe pte be orphan during vma merge
selftests/mm: extract read_sysfs and write_sysfs into vm_util
mm: expose abnormal new_pte during move_ptes
mm: fix uprobe pte be overwritten when expanding vma
mm/damon: s/primitives/code/ on comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes.
6 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels. 11 are for MM"
* tag 'mm-hotfixes-stable-2025-06-06-16-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
MAINTAINERS: add mm swap section
kmsan: test: add module description
MAINTAINERS: add tlb trace events to MMU GATHER AND TLB INVALIDATION
mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race
mm/hugetlb: unshare page tables during VMA split, not before
MAINTAINERS: add Alistair as reviewer of mm memory policy
iov_iter: use iov_offset for length calculation in iov_iter_aligned_bvec
mm/mempolicy: fix incorrect freeing of wi_kobj
alloc_tag: handle module codetag load errors as module load failures
mm/madvise: handle madvise_lock() failure during race unwinding
mm: fix vmstat after removing NR_BOUNCE
KVM: s390: rename PROT_NONE to PROT_TYPE_DUMMY
|
|
Make sure that detached trees don't receive mount propagation.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The ringbuf max_entries must be PAGE_ALIGNED. See kernel function
ringbuf_map_alloc(). So for arm64 64KB page size, adjust max_entries
properly.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250607013626.1553001-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The ringbuf max_entries must be PAGE_ALIGNED. See kernel function
ringbuf_map_alloc(). So for arm64 64KB page size, adjust max_entries
and other related metrics properly.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250607013621.1552332-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, uffd_register.range.len is set to 4096 for command
'ioctl(uffd, UFFDIO_REGISTER, &uffd_register)'. For arm64 64KB page size,
the len must be 64KB size aligned as page size alignment is required.
See fs/userfaultfd.c:validate_unaligned_range().
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250607013615.1551783-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For selftest xdp_adjust_tail/xdp_adjust_frags_tail_grow, if tested failure,
I see a long list of log output like
...
test_xdp_adjust_frags_tail_grow:PASS:9Kb+10b-untouched 0 nsec
test_xdp_adjust_frags_tail_grow:PASS:9Kb+10b-untouched 0 nsec
test_xdp_adjust_frags_tail_grow:PASS:9Kb+10b-untouched 0 nsec
test_xdp_adjust_frags_tail_grow:PASS:9Kb+10b-untouched 0 nsec
...
There are total 7374 lines of the above which is too much. Let us
only issue such logs when it is an assert failure.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250607013610.1551399-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the FWFT SBI extension, which is part of SBI 3.0 and a
dependency for many new SBI and ISA extensions
- Support for getrandom() in the VDSO
- Support for mseal
- Optimized routines for raid6 syndrome and recovery calculations
- kexec_file() supports loading Image-formatted kernel binaries
- Improvements to the instruction patching framework to allow for
atomic instruction patching, along with rules as to how systems need
to behave in order to function correctly
- Support for a handful of new ISA extensions: Svinval, Zicbop, Zabha,
some SiFive vendor extensions
- Various fixes and cleanups, including: misaligned access handling,
perf symbol mangling, module loading, PUD THPs, and improved uaccess
routines
* tag 'riscv-for-linus-6.16-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (69 commits)
riscv: uaccess: Only restore the CSR_STATUS SUM bit
RISC-V: vDSO: Wire up getrandom() vDSO implementation
riscv: enable mseal sysmap for RV64
raid6: Add RISC-V SIMD syndrome and recovery calculations
riscv: mm: Add support for Svinval extension
RISC-V: Documentation: Add enough title underlines to CMODX
riscv: Improve Kconfig help for RISCV_ISA_V_PREEMPTIVE
MAINTAINERS: Update Atish's email address
riscv: uaccess: do not do misaligned accesses in get/put_user()
riscv: process: use unsigned int instead of unsigned long for put_user()
riscv: make unsafe user copy routines use existing assembly routines
riscv: hwprobe: export Zabha extension
riscv: Make regs_irqs_disabled() more clear
perf symbols: Ignore mapping symbols on riscv
RISC-V: Kconfig: Fix help text of CMDLINE_EXTEND
riscv: module: Optimize PLT/GOT entry counting
riscv: Add support for PUD THP
riscv: xchg: Prefetch the destination word for sc.w
riscv: Add ARCH_HAS_PREFETCH[W] support with Zicbop
riscv: Add support for Zicbop
...
|
|
Pull more block updates from Jens Axboe:
- NVMe pull request via Christoph:
- TCP error handling fix (Shin'ichiro Kawasaki)
- TCP I/O stall handling fixes (Hannes Reinecke)
- fix command limits status code (Keith Busch)
- support vectored buffers also for passthrough (Pavel Begunkov)
- spelling fixes (Yi Zhang)
- MD pull request via Yu:
- fix REQ_RAHEAD and REQ_NOWAIT IO err handling for raid1/10
- fix max_write_behind setting for dm-raid
- some minor cleanups
- Integrity data direction fix and cleanup
- bcache NULL pointer fix
- Fix for loop missing write start/end handling
- Decouple hardware queues and IO threads in ublk
- Slew of ublk selftests additions and updates
* tag 'block-6.16-20250606' of git://git.kernel.dk/linux: (29 commits)
nvme: spelling fixes
nvme-tcp: fix I/O stalls on congested sockets
nvme-tcp: sanitize request list handling
nvme-tcp: remove tag set when second admin queue config fails
nvme: enable vectored registered bufs for passthrough cmds
nvme: fix implicit bool to flags conversion
nvme: fix command limits status code
selftests: ublk: kublk: improve behavior on init failure
block: flip iter directions in blk_rq_integrity_map_user()
block: drop direction param from bio_integrity_copy_user()
selftests: ublk: cover PER_IO_DAEMON in more stress tests
Documentation: ublk: document UBLK_F_PER_IO_DAEMON
selftests: ublk: add stress test for per io daemons
selftests: ublk: add functional test for per io daemons
selftests: ublk: kublk: decouple ublk_queues from ublk server threads
selftests: ublk: kublk: move per-thread data out of ublk_queue
selftests: ublk: kublk: lift queue initialization out of thread
selftests: ublk: kublk: tie sqe allocation to io instead of queue
selftests: ublk: kublk: plumb q_id in io_uring user_data
ublk: have a per-io daemon instead of a per-queue daemon
...
|
|
Currently, __split_vma() triggers hugetlb page table unsharing through
vm_ops->may_split(). This happens before the VMA lock and rmap locks are
taken - which is too early, it allows racing VMA-locked page faults in our
process and racing rmap walks from other processes to cause page tables to
be shared again before we actually perform the split.
Fix it by explicitly calling into the hugetlb unshare logic from
__split_vma() in the same place where THP splitting also happens. At that
point, both the VMA and the rmap(s) are write-locked.
An annoying detail is that we can now call into the helper
hugetlb_unshare_pmds() from two different locking contexts:
1. from hugetlb_split(), holding:
- mmap lock (exclusively)
- VMA lock
- file rmap lock (exclusively)
2. hugetlb_unshare_all_pmds(), which I think is designed to be able to
call us with only the mmap lock held (in shared mode), but currently
only runs while holding mmap lock (exclusively) and VMA lock
Backporting note:
This commit fixes a racy protection that was introduced in commit
b30c14cd6102 ("hugetlb: unshare some PMDs when splitting VMAs"); that
commit claimed to fix an issue introduced in 5.13, but it should actually
also go all the way back.
[jannh@google.com: v2]
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-1-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-0-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250527-hugetlb-fixes-splitrace-v1-1-f4136f5ec58a@google.com
Fixes: 39dde65c9940 ("[PATCH] shared page table for hugetlb page")
Signed-off-by: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [b30c14cd6102: hugetlb: unshare some PMDs when splitting VMAs]
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add test about uprobe pte be orphan during vma merge.
[akpm@linux-foundation.org: include sys/syscall.h, per Lorenzo]
Link: https://lkml.kernel.org/r/20250529155650.4017699-5-pulehui@huaweicloud.com
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Extract read_sysfs and write_sysfs into vm_util. Meanwhile, rename the
function in thuge-gen that has the same name as read_sysfs.
Link: https://lkml.kernel.org/r/20250529155650.4017699-4-pulehui@huaweicloud.com
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Hook up the generic vDSO implementation to the generic vDSO getrandom
implementation by providing the required __arch_chacha20_blocks_nostack
and getrandom_syscall implementations. Also wire up the selftests.
The benchmark result:
vdso: 25000000 times in 2.466341333 seconds
libc: 25000000 times in 41.447720005 seconds
syscall: 25000000 times in 41.043926672 seconds
vdso: 25000000 x 256 times in 162.286219353 seconds
libc: 25000000 x 256 times in 2953.855018685 seconds
syscall: 25000000 x 256 times in 2796.268546000 seconds
[ alex: - Fix dynamic relocation
- Squash Nathan's fix https://lore.kernel.org/all/20250423-riscv-fix-compat_vdso-lld-v2-1-b7bbbc244501@kernel.org/
- Add comment from Loongarch ]
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Link: https://lore.kernel.org/r/20250411024600.16045-1-xry111@xry111.site
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
Within __add_three() function, should use function parameters instead of
global variables. So that the variables groot_nested.inner.root and
groot_nested.inner.glock in rbtree_add_nodes_nested() are tested
correctly.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Link: https://lore.kernel.org/r/tencent_3DD7405C0839EBE2724AC5FA357B5402B105@qq.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When this mode is turned on, "emit_zeroes" and "compact" have no effect,
and embedded NUL characters always terminate printing of an array.
Signed-off-by: Blake Jones <blakejones@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250603203701.520541-2-blakejones@google.com
|
