| Age | Commit message (Collapse) | Author |
|---|
|
This merges up to commit a0efa2f362a6 ("Merge net-next/main to resolve
conflicts") from wireless-next into the staging-next branch to handle
the removal of a staging driver easier (it happened in the wireless-next
branch). That way we don't have developers confused and start
submitting changes for this driver that is now deleted.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The RED test uses a pair of TBF shapers. The first to get predictably-sized
stream of traffic, and second to get a 100% saturated chokepoint. To this
chokepoint it injects individual packets. Because the chokepoint is
saturated, these additional packets go straight to the backlog. This allows
the test to check RED behavior across various queue sizes.
The shapers are rated at 1Gbps, for historical reasons (before mlxsw
supported TBF offload, the test used port speed to create the chokepoints).
Machines with a low-power CPU may have trouble consistently generating
1Gbps of traffic, and the test then spuriously fails.
Instead, drop the rate to 200Mbps (Spectrum has a guaranteed shaper rate
granularity of 200Mbps, so anything lower is not guaranteed to work well).
Because that means fewer packets will be mirrored in the ECN-mark test,
adjust the passing condition accordingly.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/c6712f9c5de75ae0bc2ab3d8ea7d92aaaf93af95.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This test works by injecting into a port with a maxed-out queue a couple
packets and checks if a corresponding number of packets were dropped. This
has worked well on Spectrum<4, but on Spectrum-4 it has been noisy. This
is in line with the observation that on Spectrum-4, queue size tends to
fluctuate more. A handful of packets could then still be accepted to the
queue even though it was nominally full just recently.
In order to accommodate this behavior, send many more packets. The buffer
can fit N extra packets, but not N% packets. This therefore allows us to
set wider absolute margins, while actually narrowing them relatively.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/abc869b9f6003d400d6293ddd5edb2f4517f44d5.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The qdisc stats are taken from the port's periodic HW stats, which are
updated once a second. We try to accommodate the latency by using busywait
in build_backlog().
The issue in that seems to be that when do_mark_test() builds the backlog,
it makes the decision whether to send more packets based on the first
instance of the queue depth stat exceeding the current value, when in fact
more traffic is on the way and the queue depth would increase further. This
leads to failures in TC 1 of mark-mirror test, where we see the following
failure:
TEST: TC 0: marked packets mirror'd [ OK ]
TEST: TC 1: marked packets mirror'd [FAIL]
Spurious packets (1680 -> 2290) observed without buffer pressure
Fix by waiting for the full second before reading the queue depth for the
first time, to make sure it reflects all in-flight traffic.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Link: https://patch.msgid.link/321dcf8b3e9a1f0766429c8cf3e3f1746f1bc375.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Backlog fluctuates on Spectrum-4 much more than on <4. In practice we can
sample queue depth values going from about -12% to about +7% of the
configured RED limit. The test which checks the queue size has a limit of
+-10%, and as a result often fails. We attempted to fix the issue by
busywaiting for several seconds hoping to get within the bounds, but that
still proved to be too noisy (or the wait time would be impractically
long). Unfortunately we have to bump the value tolerance from 10% to 15%,
which in this patch do.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Link: https://patch.msgid.link/f54950df2a8fcba46c3ddc1053376352fa2e592b.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Backlog fluctuates on Spectrum-4 much more than on <4. Increasing the
desired backlog seems to help, as the constant fluctuations do not overlap
into the territory where packets are marked.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Link: https://patch.msgid.link/0821fb3aa8bb6a6c0d3000baab04995517c9a0cc.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
- Fix compilation with KVM_INTEL=KVM_AMD=n
- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
- Fix compilation on non-x86 architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.12, take #1
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes to build warnings, install scripts, run-time error path, and git
status cleanups to tests:
- devices/probe: fix for Python3 regex string syntax warnings
- clone3: removing unused macro from clone3_cap_checkpoint_restore()
- vDSO: fix to align getrandom states to cache line
- core and exec: add missing executables to .gitignore files
- rtc: change to skip test if /dev/rtc0 can't be accessed
- timers/posix: fix warn_unused_result result in __fatal_error()
- breakpoints: fix to detect suspend successful condition correctly
- hid: fix to install required dependencies to run the test"
* tag 'linux_kselftest-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: breakpoints: use remaining time to check if suspend succeed
kselftest/devices/probe: Fix SyntaxWarning in regex strings for Python3
selftest: hid: add missing run-hid-tools-tests.sh
selftests: vDSO: align getrandom states to cache line
selftests: exec: update gitignore for load_address
selftests: core: add unshare_test to gitignore
clone3: clone3_cap_checkpoint_restore: remove unused MAX_PID_NS_LEVEL macro
selftests:timers: posix_timers: Fix warn_unused_result in __fatal_error()
selftest: rtc: Check if could access /dev/rtc0 before testing
|
|
With the inclusion of commit c259acab839e ("ptp/ioctl: support
MONOTONIC{,_RAW} timestamps for PTP_SYS_OFFSET_EXTENDED") clock_gettime()
now allows retrieval of pre/post timestamps for CLOCK_MONOTONIC and
CLOCK_MONOTONIC_RAW timebases along with the previously supported
CLOCK_REALTIME.
This patch adds a command line option 'y' to the testptp program to
choose one of the allowed timebases [realtime aka system, monotonic,
and monotonic-raw).
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20241003101506.769418-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch re-adds the (updated) ioam selftests with support for the
tunsrc feature.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20241002162731.19847-3-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch entirely removes the ioam selftests to prepare for the next
patch in this series, which re-adds the new ioam selftests for better
readability.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20241002162731.19847-2-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend txtimestamp test to run with fixed tskey using
SCM_TS_OPT_ID control message for all types of sockets.
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://patch.msgid.link/20241001125716.2832769-4-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Slightly high amount of changes in this round, partly because of my
vacation in the last weeks. But all changes are small and nothing
looks worrisome.
The biggest LOCs is MAINTAINERS updates, and there is a core change
for card-ID string creation for non-ASCII inputs. Others are rather
device-specific, such as new quirks and device IDs for ASoC, usual
HD-audio and USB-audio quirks and fixes, as well as regression fixes
in HD-audio HDMI audio and Conexant codec"
* tag 'sound-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (39 commits)
ALSA: hda/conexant: Fix conflicting quirk for System76 Pangolin
ALSA: line6: add hw monitor volume control to POD HD500X
ALSA: gus: Fix some error handling paths related to get_bpos() usage
ALSA: hda: Add missing parameter description for snd_hdac_stream_timecounter_init()
ALSA: usb-audio: Add native DSD support for Luxman D-08u
ALSA: core: add isascii() check to card ID generator
MAINTAINERS: ALSA: use linux-sound@vger.kernel.org list
Revert "ALSA: hda: Conditionally use snooping for AMD HDMI"
ASoC: intel: sof_sdw: Add check devm_kasprintf() returned value
ASoC: imx-card: Set card.owner to avoid a warning calltrace if SND=m
ASoC: dt-bindings: davinci-mcasp: Fix interrupts property
ASoC: qcom: sm8250: add qrb4210-rb2-sndcard compatible string
ASoC: dt-bindings: qcom,sm8250: add qrb4210-rb2-sndcard
ALSA: hda: fix trigger_tstamp_latched
ALSA: hda/realtek: Add a quirk for HP Pavilion 15z-ec200
ALSA: hda/generic: Drop obsoleted obey_preferred_dacs flag
ALSA: hda/generic: Unconditionally prefer preferred_dacs pairs
ALSA: silence integer wrapping warning
ASoC: Intel: soc-acpi: arl: Fix some missing empty terminators
ASoC: Intel: soc-acpi-intel-rpl-match: add missing empty item
...
|
|
Rename ip_len to payload_len since the length in this case refers only
to the payload, and not the entire IP packet like for IPv4. While we're
at it, just use the variable directly when calling
recv_verify_packet_udp/tcp.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240930162935.980712-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test runs "devlink reload" explicitly. Instead, it is better to use
devlink_reload() which waits for udev events to be processed. Do not sleep
after reload, as devlink_reload() blocks until all the netdevs are renamed.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/844509e3057b65277a7181a23c95b71ec95e8a56.1727706741.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts and no adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from ieee802154, bluetooth and netfilter.
Current release - regressions:
- eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc
- eth: am65-cpsw: fix forever loop in cleanup code
Current release - new code bugs:
- eth: mlx5: HWS, fixed double-free in error flow of creating SQ
Previous releases - regressions:
- core: avoid potential underflow in qdisc_pkt_len_init() with UFO
- core: test for not too small csum_start in virtio_net_hdr_to_skb()
- vrf: revert "vrf: remove unnecessary RCU-bh critical section"
- bluetooth:
- fix uaf in l2cap_connect
- fix possible crash on mgmt_index_removed
- dsa: improve shutdown sequence
- eth: mlx5e: SHAMPO, fix overflow of hd_per_wq
- eth: ip_gre: fix drops of small packets in ipgre_xmit
Previous releases - always broken:
- core: fix gso_features_check to check for both
dev->gso_{ipv4_,}max_size
- core: fix tcp fraglist segmentation after pull from frag_list
- netfilter: nf_tables: prevent nf_skb_duplicated corruption
- sctp: set sk_state back to CLOSED if autobind fails in
sctp_listen_start
- mac802154: fix potential RCU dereference issue in
mac802154_scan_worker
- eth: fec: restart PPS after link state change"
* tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems
doc: net: napi: Update documentation for napi_schedule_irqoff
net/ncsi: Disable the ncsi work before freeing the associated structure
net: phy: qt2025: Fix warning: unused import DeviceId
gso: fix udp gso fraglist segmentation after pull from frag_list
bridge: mcast: Fail MDB get request on empty entry
vrf: revert "vrf: Remove unnecessary RCU-bh critical section"
net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code
net: phy: realtek: Check the index value in led_hw_control_get
ppp: do not assume bh is held in ppp_channel_bridge_input()
selftests: rds: move include.sh to TEST_FILES
net: test for not too small csum_start in virtio_net_hdr_to_skb()
net: gso: fix tcp fraglist segmentation after pull from frag_list
ipv4: ip_gre: Fix drops of small packets in ipgre_xmit
net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check
net: add more sanity checks to qdisc_pkt_len_init()
net: avoid potential underflow in qdisc_pkt_len_init() with UFO
net: ethernet: ti: cpsw_ale: Fix warning on some platforms
net: microchip: Make FDMA config symbol invisible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix incorrect documentation in uapi/linux/netfilter/nf_tables.h
regarding flowtable hooks, from Phil Sutter.
2) Fix nft_audit.sh selftests with newer nft binaries, due to different
(valid) audit output, also from Phil.
3) Disable BH when duplicating packets via nf_dup infrastructure,
otherwise race on nf_skb_duplicated for locally generated traffic.
From Eric.
4) Missing return in callback of selftest C program, from zhang jiao.
netfilter pull request 24-10-02
* tag 'nf-24-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: Add missing return value
netfilter: nf_tables: prevent nf_skb_duplicated corruption
selftests: netfilter: Fix nft_audit.sh for newer nft binaries
netfilter: uapi: NFTA_FLOWTABLE_HOOK is NLA_NESTED
====================
Link: https://patch.msgid.link/20241002202421.1281311-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is no va_end after va_copy, just add it.
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240927040050.7851-1-zhangjiao2@cmss.chinamobile.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The include.sh file is generated for inclusion and should not be executable.
Otherwise, it will be added to kselftest-list.txt. Additionally, add the
executable bit for test.py at the same time to ensure proper functionality.
Fixes: 3ade6ce1255e ("selftests: rds: add testing infrastructure")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240927041349.81216-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
step_after_suspend_test fails with device busy error while
writing to /sys/power/state to start suspend. The test believes
it failed to enter suspend state with
$ sudo ./step_after_suspend_test
TAP version 13
Bail out! Failed to enter Suspend state
However, in the kernel message, I indeed see the system get
suspended and then wake up later.
[611172.033108] PM: suspend entry (s2idle)
[611172.044940] Filesystems sync: 0.006 seconds
[611172.052254] Freezing user space processes
[611172.059319] Freezing user space processes completed (elapsed 0.001 seconds)
[611172.067920] OOM killer disabled.
[611172.072465] Freezing remaining freezable tasks
[611172.080332] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[611172.089724] printk: Suspending console(s) (use no_console_suspend to debug)
[611172.117126] serial 00:03: disabled
some other hardware get reconnected
[611203.136277] OOM killer enabled.
[611203.140637] Restarting tasks ...
[611203.141135] usb 1-8.1: USB disconnect, device number 7
[611203.141755] done.
[611203.155268] random: crng reseeded on system resumption
[611203.162059] PM: suspend exit
After investigation, I noticed that for the code block
if (write(power_state_fd, "mem", strlen("mem")) != strlen("mem"))
ksft_exit_fail_msg("Failed to enter Suspend state\n");
The write will return -1 and errno is set to 16 (device busy).
It should be caused by the write function is not successfully returned
before the system suspend and the return value get messed when waking up.
As a result, It may be better to check the time passed of those few
instructions to determine whether the suspend is executed correctly for
it is pretty hard to execute those few lines for 5 seconds.
The timer to wake up the system is set to expire after 5 seconds and
no re-arm. If the timer remaining time is 0 second and 0 nano secomd,
it means the timer expired and wake the system up. Otherwise, the system
could be considered to enter the suspend state failed if there is any
remaining time.
After appling this patch, the test would not fail for it believes the
system does not go to suspend by mistake. It now could continue to the
rest part of the test after suspend.
Fixes: bfd092b8c272 ("selftests: breakpoint: add step_after_suspend_test")
Reported-by: Sinadin Shan <sinadin.shan@oracle.com>
Signed-off-by: Yifei Liu <yifei.l.liu@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Insert raw strings to prevent Python3 from interpreting string literals
as Unicode strings and "\d" as invalid escaped sequence.
Fix the warnings:
tools/testing/selftests/devices/probe/test_discoverable_devices.py:48:
SyntaxWarning: invalid escape sequence '\d' usb_controller_sysfs_dir =
"usb[\d]+"
tools/testing/selftests/devices/probe/test_discoverable_devices.py: 94:
SyntaxWarning: invalid escape sequence '\d' re_usb_version =
re.compile("PRODUCT=.*/(\d)/.*")
Fixes: dacf1d7a78bf ("kselftest: Add test to verify probe of devices from discoverable buses")
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.12
A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.
|
|
The recent addition of support for testing with the x86 specific quirk
KVM_X86_QUIRK_SLOT_ZAP_ALL disabled in the generic memslot tests broke the
build of the KVM selftests for all other architectures:
In file included from include/kvm_util.h:8,
from include/memstress.h:13,
from memslot_modification_stress_test.c:21:
memslot_modification_stress_test.c: In function ‘main’:
memslot_modification_stress_test.c:176:38: error: ‘KVM_X86_QUIRK_SLOT_ZAP_ALL’ undeclared (first use in this function)
176 | KVM_X86_QUIRK_SLOT_ZAP_ALL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Add __x86_64__ guard defines to avoid building the relevant code on other
architectures.
Fixes: 61de4c34b51c ("KVM: selftests: Test memslot move in memslot_perf_test with quirk disabled")
Fixes: 218f6415004a ("KVM: selftests: Allow slot modification stress test with quirk disabled")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Message-ID: <20240930-kvm-build-breakage-v1-1-866fad3cc164@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
HID test cases run tests using the run-hid-tools-tests.sh script.
When installed with "make install", the run-hid-tools-tests.sh
script will not be copied over, resulting in the following error message.
make -C tools/testing/selftests/ TARGETS=hid install \
INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -c hid
selftests: hid: hid-core.sh
bash: ./run-hid-tools-tests.sh: No such file or directory
Add the run-hid-tools-tests.sh script to the TEST_FILES in the Makefile
for it to be installed.
Fixes: ffb85d5c9e80 ("selftests: hid: import hid-tools hid-core tests")
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This prevents false sharing, which makes a large difference on machines
with several NUMA nodes, such as on a dual socket Intel(R) Xeon(R) Gold
6338 CPU @ 2.00GHz, where the "bench-multi" test goes from 2.7s down to
1.9s. While this is just test code, it also forms the basis of how folks
will wind up implementing this in libraries, so we should implement this
simple cache alignment improvement here.
Suggested-by: Florian Weimer <fweimer@redhat.com>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The name of the "load_address" objects has been modified, but the
corresponding entry in the gitignore file must be updated.
Update the load_address entry in the gitignore file to account for
the new names, adding an exception to keep on tracking load_address.c.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This executable is missing from the corresponding gitignore file.
Add unshare_test to the core gitignore list.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The macro MAX_PID_NS_LEVEL is never referenced in the code, so remove it.
Signed-off-by: Ba Jing <bajing@cmss.chinamobile.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
__fatal_error routine doesn't check strerror_r() return value,
which results in the following compile time warning:
posix_timers.c: In function ‘__fatal_error’:
posix_timers.c:31:9: warning: ignoring return value of ‘strerror_r’ declared with attribute ‘warn_unused_result’ [-Wunused-result]
31 | strerror_r(errno, buf, sizeof(buf));
Fix this by adding a check for return value and error handling appropriate
for the GNU-specific strerror_r() in use in __fatal_error(). Check if
return string is null and handle accordingly.
From Linux strerror_r() manual page:
"The GNU-specific strerror_r() returns a pointer to a string containing
the error message. This may be either a pointer to a string that the
function stores in buf, or a pointer to some (immutable) static string
(in which case buf is unused). If the function stores a string in buf,
then at most buflen bytes are stored (the string may be truncated if
buflen is too small and errnum is unknown). The string always includes
a terminating null byte."
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: John Stultz <jstultz@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The rtctest requires the read permission on /dev/rtc0. The rtctest will
be skipped if the /dev/rtc0 is not readable.
Reviewed-by: Koba Ko <kobak@nvidia.com>
Reviewed-by: Matthew R. Ochs <mochs@nvidia.com>
Signed-off-by: Joseph Jang <jjang@nvidia.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Currently, if alsa development package is not installed on the user's
system then the make command would print a `pagefull` of errors. In
particular one error message is repeated 3 times. This error is returned
by `pkg-config` and since it is not being handeled appropriately,
repeated calls to `pkg-config` prints the same message again.
This patch adds check for alsa package installation. If alsa is not
installed, a short and consize error is returned. Also, it does not
affect the compilation of other tests.
Signed-off-by: Abdul Rahim <abdul.rahim@myyahoo.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20240922225824.18918-1-abdul.rahim@myyahoo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"One urgent fix to vDSO as automated testing is failing due to this
bug"
* tag 'linux_kselftest-next-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vDSO: align stack for O2-optimized memcpy
|
|
Pull x86 kvm updates from Paolo Bonzini:
"x86:
- KVM currently invalidates the entirety of the page tables, not just
those for the memslot being touched, when a memslot is moved or
deleted.
This does not traditionally have particularly noticeable overhead,
but Intel's TDX will require the guest to re-accept private pages
if they are dropped from the secure EPT, which is a non starter.
Actually, the only reason why this is not already being done is a
bug which was never fully investigated and caused VM instability
with assigned GeForce GPUs, so allow userspace to opt into the new
behavior.
- Advertise AVX10.1 to userspace (effectively prep work for the
"real" AVX10 functionality that is on the horizon)
- Rework common MSR handling code to suppress errors on userspace
accesses to unsupported-but-advertised MSRs
This will allow removing (almost?) all of KVM's exemptions for
userspace access to MSRs that shouldn't exist based on the vCPU
model (the actual cleanup is non-trivial future work)
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC)
splits the 64-bit value into the legacy ICR and ICR2 storage,
whereas Intel (APICv) stores the entire 64-bit value at the ICR
offset
- Fix a bug where KVM would fail to exit to userspace if one was
triggered by a fastpath exit handler
- Add fastpath handling of HLT VM-Exit to expedite re-entering the
guest when there's already a pending wake event at the time of the
exit
- Fix a WARN caused by RSM entering a nested guest from SMM with
invalid guest state, by forcing the vCPU out of guest mode prior to
signalling SHUTDOWN (the SHUTDOWN hits the VM altogether, not the
nested guest)
- Overhaul the "unprotect and retry" logic to more precisely identify
cases where retrying is actually helpful, and to harden all retry
paths against putting the guest into an infinite retry loop
- Add support for yielding, e.g. to honor NEED_RESCHED, when zapping
rmaps in the shadow MMU
- Refactor pieces of the shadow MMU related to aging SPTEs in
prepartion for adding multi generation LRU support in KVM
- Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is
enabled, i.e. when the CPU has already flushed the RSB
- Trace the per-CPU host save area as a VMCB pointer to improve
readability and cleanup the retrieval of the SEV-ES host save area
- Remove unnecessary accounting of temporary nested VMCB related
allocations
- Set FINAL/PAGE in the page fault error code for EPT violations if
and only if the GVA is valid. If the GVA is NOT valid, there is no
guest-side page table walk and so stuffing paging related metadata
is nonsensical
- Fix a bug where KVM would incorrectly synthesize a nested VM-Exit
instead of emulating posted interrupt delivery to L2
- Add a lockdep assertion to detect unsafe accesses of vmcs12
structures
- Harden eVMCS loading against an impossible NULL pointer deref
(really truly should be impossible)
- Minor SGX fix and a cleanup
- Misc cleanups
Generic:
- Register KVM's cpuhp and syscore callbacks when enabling
virtualization in hardware, as the sole purpose of said callbacks
is to disable and re-enable virtualization as needed
- Enable virtualization when KVM is loaded, not right before the
first VM is created
Together with the previous change, this simplifies a lot the logic
of the callbacks, because their very existence implies
virtualization is enabled
- Fix a bug that results in KVM prematurely exiting to userspace for
coalesced MMIO/PIO in many cases, clean up the related code, and
add a testcase
- Fix a bug in kvm_clear_guest() where it would trigger a buffer
overflow _if_ the gpa+len crosses a page boundary, which thankfully
is guaranteed to not happen in the current code base. Add WARNs in
more helpers that read/write guest memory to detect similar bugs
Selftests:
- Fix a goof that caused some Hyper-V tests to be skipped when run on
bare metal, i.e. NOT in a VM
- Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES
guest
- Explicitly include one-off assets in .gitignore. Past Sean was
completely wrong about not being able to detect missing .gitignore
entries
- Verify userspace single-stepping works when KVM happens to handle a
VM-Exit in its fastpath
- Misc cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
Documentation: KVM: fix warning in "make htmldocs"
s390: Enable KVM_S390_UCONTROL config in debug_defconfig
selftests: kvm: s390: Add VM run test case
KVM: SVM: let alternatives handle the cases when RSB filling is required
KVM: VMX: Set PFERR_GUEST_{FINAL,PAGE}_MASK if and only if the GVA is valid
KVM: x86/mmu: Use KVM_PAGES_PER_HPAGE() instead of an open coded equivalent
KVM: x86/mmu: Add KVM_RMAP_MANY to replace open coded '1' and '1ul' literals
KVM: x86/mmu: Fold mmu_spte_age() into kvm_rmap_age_gfn_range()
KVM: x86/mmu: Morph kvm_handle_gfn_range() into an aging specific helper
KVM: x86/mmu: Honor NEED_RESCHED when zapping rmaps and blocking is allowed
KVM: x86/mmu: Add a helper to walk and zap rmaps for a memslot
KVM: x86/mmu: Plumb a @can_yield parameter into __walk_slot_rmaps()
KVM: x86/mmu: Move walk_slot_rmaps() up near for_each_slot_rmap_range()
KVM: x86/mmu: WARN on MMIO cache hit when emulating write-protected gfn
KVM: x86/mmu: Detect if unprotect will do anything based on invalid_list
KVM: x86/mmu: Subsume kvm_mmu_unprotect_page() into the and_retry() version
KVM: x86: Rename reexecute_instruction()=>kvm_unprotect_and_retry_on_failure()
KVM: x86: Update retry protection fields when forcing retry on emulation failure
KVM: x86: Apply retry protection to "unprotect on failure" path
KVM: x86: Check EMULTYPE_WRITE_PF_TO_SP before unprotecting gfn
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull compute express link (cxl) updates from Dave Jiang:
"Major changes address HDM decoder initialization from DVSEC ranges,
refactoring the code related to cxl mailboxes to be independent of the
memory devices, and adding support for shared upstream link
access_coordinate calculation, as well as a change to remove locking
from memory notifier callback.
In addition, a number of misc cleanups and refactoring of the code are
also included.
Address HDM decoder initialization from DVSEC ranges:
- Only register non-zero DVSEC ranges
- Remove duplicate implementation of waiting for memory_info_valid
- Simplify the checking of mem_enabled in cxl_hdm_decode_init()
Refactor the code related to cxl mailboxes to be independent of the memory devices:
- Move cxl headers in include/linux/ to include/cxl
- Move all mailbox related data to 'struct cxl_mailbox'
- Refactor mailbox APIs with 'struct cxl_mailbox' as input instead of
memory device state
Add support for shared upstream link access_coordinate calculation for
configurations that have multiple targets under a switch or a root
port where the aggregated bandwidth can be greater than the upstream
link of the switch/RP upstream link:
- Preserve the CDAT access_coordinate from an endpoint
- Add the support for shared upstream link access_coordinate calculation
- Add documentation to explain how the calculations are done
Remove locking from memory notifier callback.
Misc cleanups:
- Convert devm_cxl_add_root() to return using ERR_CAST()
- cxl_test use dev_is_platform() instead of open coding
- Remove duplicate include of header core.h in core/cdat.c
- use scoped resource management to drop put_device() for cxl_port
- Use scoped_guard to drop device_lock() for cxl_port
- Refactor __devm_cxl_add_port() to drop gotos
- Rename cxl_setup_parent_dport to cxl_dport_init_aer and
cxl_dport_map_regs() to cxl_dport_map_ras()
- Refactor cxl_dport_init_aer() to be more concise
- Remove duplicate host_bridge->native_aer checking in
cxl_dport_init_ras_reporting()
- Fix comment for cxl_query_cmd()"
* tag 'cxl-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
cxl: Add documentation to explain the shared link bandwidth calculation
cxl: Calculate region bandwidth of targets with shared upstream link
cxl: Preserve the CDAT access_coordinate for an endpoint
cxl: Fix comment regarding cxl_query_cmd() return data
cxl: Convert cxl_internal_send_cmd() to use 'struct cxl_mailbox' as input
cxl: Move mailbox related bits to the same context
cxl: move cxl headers to new include/cxl/ directory
cxl/region: Remove lock from memory notifier callback
cxl/pci: simplify the check of mem_enabled in cxl_hdm_decode_init()
cxl/pci: Check Mem_info_valid bit for each applicable DVSEC
cxl/pci: Remove duplicated implementation of waiting for memory_info_valid
cxl/pci: Fix to record only non-zero ranges
cxl/pci: Remove duplicate host_bridge->native_aer checking
cxl/pci: cxl_dport_map_rch_aer() cleanup
cxl/pci: Rename cxl_setup_parent_dport() and cxl_dport_map_regs()
cxl/port: Refactor __devm_cxl_add_port() to drop goto pattern
cxl/port: Use scoped_guard()/guard() to drop device_lock() for cxl_port
cxl/port: Use __free() to drop put_device() for cxl_port
cxl: Remove duplicate included header file core.h
tools/testing/cxl: Use dev_is_platform()
...
|
|
When switching on -O2, gcc generates SSE2 instructions that assume a
16-byte aligned stack, which the standalone test's start point wasn't
aligning. Fix this with the usual alignment sequence.
Fixes: ecb8bd70d51 ("selftests: vDSO: build tests with O2 optimization")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202409241558.98e13f6f-oliver.sang@intel.com
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"19 hotfixes. 13 are cc:stable.
There's a focus on fixes for the memfd_pin_folios() work which was
added into 6.11. Apart from that, the usual shower of singleton fixes"
* tag 'mm-hotfixes-stable-2024-09-27-09-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
ocfs2: fix uninit-value in ocfs2_get_block()
zram: don't free statically defined names
memory tiers: use default_dram_perf_ref_source in log message
Revert "list: test: fix tests for list_cut_position()"
kselftests: mm: fix wrong __NR_userfaultfd value
compiler.h: specify correct attribute for .rodata..c_jump_table
mm/damon/Kconfig: update DAMON doc URL
mm: kfence: fix elapsed time for allocated/freed track
ocfs2: fix deadlock in ocfs2_get_system_file_inode
ocfs2: reserve space for inline xattr before attaching reflink tree
mm: migrate: annotate data-race in migrate_folio_unmap()
mm/hugetlb: simplify refs in memfd_alloc_folio
mm/gup: fix memfd_pin_folios alloc race panic
mm/gup: fix memfd_pin_folios hugetlb page allocation
mm/hugetlb: fix memfd_pin_folios resv_huge_pages leak
mm/hugetlb: fix memfd_pin_folios free_huge_pages leak
mm/filemap: fix filemap_get_folios_contig THP panic
mm: make SPLIT_PTE_PTLOCKS depend on SMP
tools: fix shared radix-tree build
|
|
There is no return value in count_entries, just add it.
Fixes: eff3c558bb7e ("netfilter: ctnetlink: support filtering by zone")
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
As a side-effect of nftables' commit dbff26bfba833 ("cache: consolidate
reset command"), audit logs changed when more objects were reset than
fit into a single netlink message.
Since the objects' distribution in netlink messages is not relevant,
implement a summarizing function which combines repeated audit logs into
a single one with summed up 'entries=' value.
Fixes: 203bb9d39866 ("selftests: netfilter: Extend nft_audit.sh")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
grep -rnIF "#define __NR_userfaultfd"
tools/include/uapi/asm-generic/unistd.h:681:#define __NR_userfaultfd 282
arch/x86/include/generated/uapi/asm/unistd_32.h:374:#define
__NR_userfaultfd 374
arch/x86/include/generated/uapi/asm/unistd_64.h:327:#define
__NR_userfaultfd 323
arch/x86/include/generated/uapi/asm/unistd_x32.h:282:#define
__NR_userfaultfd (__X32_SYSCALL_BIT + 323)
arch/arm/include/generated/uapi/asm/unistd-eabi.h:347:#define
__NR_userfaultfd (__NR_SYSCALL_BASE + 388)
arch/arm/include/generated/uapi/asm/unistd-oabi.h:359:#define
__NR_userfaultfd (__NR_SYSCALL_BASE + 388)
include/uapi/asm-generic/unistd.h:681:#define __NR_userfaultfd 282
The number is dependent on the architecture. The above data shows that:
x86 374
x86_64 323
The value of __NR_userfaultfd was changed to 282 when asm-generic/unistd.h
was included. It makes the test to fail every time as the correct number
of this syscall on x86_64 is 323. Fix the header to asm/unistd.h.
Link: https://lkml.kernel.org/r/20240923053836.3270393-1-usama.anjum@collabora.com
Fixes: a5c6bc590094 ("selftests/mm: remove local __NR_* definitions")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The shared radix-tree build is not correctly recompiling when
lib/maple_tree.c and lib/test_maple_tree.c are modified - fix this by
adding these core components to the SHARED_DEPS list.
Additionally, add missing header guards to shared header files.
Link: https://lkml.kernel.org/r/20240924180724.112169-1-lorenzo.stoakes@oracle.com
Fixes: 74579d8dab47 ("tools: separate out shared radix-tree components")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
It looks like that most people are still traveling: both the ML volume
and the processing capacity are low.
Previous releases - regressions:
- netfilter:
- nf_reject_ipv6: fix nf_reject_ip6_tcphdr_put()
- nf_tables: keep deleted flowtable hooks until after RCU
- tcp: check skb is non-NULL in tcp_rto_delta_us()
- phy: aquantia: fix -ETIMEDOUT PHY probe failure when firmware not
present
- eth: virtio_net: fix mismatched buf address when unmapping for
small packets
- eth: stmmac: fix zero-division error when disabling tc cbs
- eth: bonding: fix unnecessary warnings and logs from
bond_xdp_get_xmit_slave()
Previous releases - always broken:
- netfilter:
- fix clash resolution for bidirectional flows
- fix allocation with no memcg accounting
- eth: r8169: add tally counter fields added with RTL8125
- eth: ravb: fix rx and tx frame size limit"
* tag 'net-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
selftests: netfilter: Avoid hanging ipvs.sh
kselftest: add test for nfqueue induced conntrack race
netfilter: nfnetlink_queue: remove old clash resolution logic
netfilter: nf_tables: missing objects with no memcg accounting
netfilter: nf_tables: use rcu chain hook list iterator from netlink dump path
netfilter: ctnetlink: compile ctnetlink_label_size with CONFIG_NF_CONNTRACK_EVENTS
netfilter: nf_reject: Fix build warning when CONFIG_BRIDGE_NETFILTER=n
netfilter: nf_tables: Keep deleted flowtable hooks until after RCU
docs: tproxy: ignore non-transparent sockets in iptables
netfilter: ctnetlink: Guard possible unused functions
selftests: netfilter: nft_tproxy.sh: add tcp tests
selftests: netfilter: add reverse-clash resolution test case
netfilter: conntrack: add clash resolution for reverse collisions
netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash
selftests/net: packetdrill: increase timing tolerance in debug mode
usbnet: fix cyclical race on disconnect with work queue
net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is enabled
virtio_net: Fix mismatched buf address when unmapping for small packets
bonding: Fix unnecessary warnings and logs from bond_xdp_get_xmit_slave()
r8169: add missing MODULE_FIRMWARE entry for RTL8126A rev.b
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem
updates all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
greybus: gb-beagleplay: Add firmware upload API
arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
MAINTAINERS: Update path for U-Boot environment variables YAML
nvmem: layouts: add U-Boot env layout
comedi: ni_routing: tools: Check when the file could not be opened
ocxl: Remove the unused declarations in headr file
hpet: Fix the wrong format specifier
uio: Constify struct kobj_type
cxl: Constify struct kobj_type
binder: modify the comment for binder_proc_unlock
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- uprobes: make trace_uprobe->nhit counter a per-CPU one
This makes uprobe event's hit counter per-CPU for improving
scalability on multi-core environment
- kprobes: Remove obsoleted declaration for init_test_probes
Remove unused init_test_probes() from header
- Raw tracepoint probe supports raw tracepoint events on modules:
- add a function for iterating over all tracepoints in all modules
- add a function for iterating over tracepoints in a module
- support raw tracepoint events on modules
- support raw tracepoints on future loaded modules
- add a test for tracepoint events on modules"
* tag 'probes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
sefltests/tracing: Add a test for tracepoint events on modules
tracing/fprobe: Support raw tracepoints on future loaded modules
tracing/fprobe: Support raw tracepoint events on modules
tracepoint: Support iterating tracepoints in a loading module
tracepoint: Support iterating over tracepoints on modules
kprobes: Remove obsoleted declaration for init_test_probes
uprobes: turn trace_uprobe's nhit counter to be per-CPU one
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
v2: with kdoc fixes per Paolo Abeni.
The following patchset contains Netfilter fixes for net:
Patch #1 and #2 handle an esoteric scenario: Given two tasks sending UDP
packets to one another, two packets of the same flow in each direction
handled by different CPUs that result in two conntrack objects in NEW
state, where reply packet loses race. Then, patch #3 adds a testcase for
this scenario. Series from Florian Westphal.
1) NAT engine can falsely detect a port collision if it happens to pick
up a reply packet as NEW rather than ESTABLISHED. Add extra code to
detect this and suppress port reallocation in this case.
2) To complete the clash resolution in the reply direction, extend conntrack
logic to detect clashing conntrack in the reply direction to existing entry.
3) Adds a test case.
Then, an assorted list of fixes follow:
4) Add a selftest for tproxy, from Antonio Ojea.
5) Guard ctnetlink_*_size() functions under
#if defined(CONFIG_NETFILTER_NETLINK_GLUE_CT) || defined(CONFIG_NF_CONNTRACK_EVENTS)
From Andy Shevchenko.
6) Use -m socket --transparent in iptables tproxy documentation.
From XIE Zhibang.
7) Call kfree_rcu() when releasing flowtable hooks to address race with
netlink dump path, from Phil Sutter.
8) Fix compilation warning in nf_reject with CONFIG_BRIDGE_NETFILTER=n.
From Simon Horman.
9) Guard ctnetlink_label_size() under CONFIG_NF_CONNTRACK_EVENTS which
is its only user, to address a compilation warning. From Simon Horman.
10) Use rcu-protected list iteration over basechain hooks from netlink
dump path.
11) Fix memcg for nf_tables, use GFP_KERNEL_ACCOUNT is not complete.
12) Remove old nfqueue conntrack clash resolution. Instead trying to
use same destination address consistently which requires double DNAT,
use the existing clash resolution which allows clashing packets
go through with different destination. Antonio Ojea originally
reported an issue from the postrouting chain, I proposed a fix:
https://lore.kernel.org/netfilter-devel/ZuwSwAqKgCB2a51-@calendula/T/
which he reported it did not work for him.
13) Adds a selftest for patch 12.
14) Fixes ipvs.sh selftest.
netfilter pull request 24-09-26
* tag 'nf-24-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: Avoid hanging ipvs.sh
kselftest: add test for nfqueue induced conntrack race
netfilter: nfnetlink_queue: remove old clash resolution logic
netfilter: nf_tables: missing objects with no memcg accounting
netfilter: nf_tables: use rcu chain hook list iterator from netlink dump path
netfilter: ctnetlink: compile ctnetlink_label_size with CONFIG_NF_CONNTRACK_EVENTS
netfilter: nf_reject: Fix build warning when CONFIG_BRIDGE_NETFILTER=n
netfilter: nf_tables: Keep deleted flowtable hooks until after RCU
docs: tproxy: ignore non-transparent sockets in iptables
netfilter: ctnetlink: Guard possible unused functions
selftests: netfilter: nft_tproxy.sh: add tcp tests
selftests: netfilter: add reverse-clash resolution test case
netfilter: conntrack: add clash resolution for reverse collisions
netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash
====================
Link: https://patch.msgid.link/20240926110717.102194-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If the client can't reach the server, the latter remains listening
forever. Kill it after 5s of waiting.
Fixes: 867d2190799a ("selftests: netfilter: add ipvs test script")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The netfilter race happens when two packets with the same tuple are DNATed
and enqueued with nfqueue in the postrouting hook.
Once one of the packet is reinjected it may be DNATed again to a different
destination, but the conntrack entry remains the same and the return packet
was dropped.
Based on earlier patch from Antonio Ojea.
Link: https://bugzilla.netfilter.org/show_bug.cgi?id=1766
Co-developed-by: Antonio Ojea <aojea@google.com>
Signed-off-by: Antonio Ojea <aojea@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The TPROXY functionality is widely used, however, there are only mptcp
selftests covering this feature.
The selftests represent the most common scenarios and can also be used
as selfdocumentation of the feature.
UDP and TCP testcases are split in different files because of the
different nature of the protocols, specially due to the challenges that
present to reliable test UDP due to the connectionless nature of the
protocol. UDP only covers the scenarios involving the prerouting hook.
The UDP tests are signfinicantly slower than the TCP ones, hence they
use a larger timeout, it takes 20 seconds to run the full UDP suite
on a 48 vCPU Intel(R) Xeon(R) CPU @2.60GHz.
Signed-off-by: Antonio Ojea <aojea@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
