| Age | Commit message (Collapse) | Author |
|---|
|
Add the SO_PEEK_OFF selftest for UDP. In this patch, I mainly do
three things:
1. rename tcp_so_peek_off.c
2. adjust for UDP protocol
3. add selftests into it
Suggested-by: Jon Maloy <jmaloy@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ensure that we get signal context for POR_EL0 if and only if POE is present
on the system.
Copied from the TPIDR2 test.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240822151113.1479789-30-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Teach the signal frame parsing about the new POE frame, avoids warning when it
is generated.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240822151113.1479789-29-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Check that when POE is enabled, the POR_EL0 register is accessible.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240822151113.1479789-28-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The encoding of the pkey register differs on arm64, than on x86/ppc. On those
platforms, a bit in the register is used to disable permissions, for arm64, a
bit enabled in the register indicates that the permission is allowed.
This drops two asserts of the form:
assert(read_pkey_reg() <= orig_pkey_reg);
Because on arm64 this doesn't hold, due to the encoding.
The pkey must be reset to both access allow and write allow in the signal
handler. pkey_access_allow() works currently for PowerPC as the
PKEY_DISABLE_ACCESS and PKEY_DISABLE_WRITE have overlapping bits set.
Access to the uc_mcontext is abstracted, as arm64 has a different structure.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20240822151113.1479789-27-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
arm64's fpregs are not at a constant offset from sigcontext. Since this is
not an important part of the test, don't print the fpregs pointer on arm64.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20240822151113.1479789-26-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Put this function in the header so that it can be used by other tests, without
needing to link to testcases.c.
This will be used by selftest/mm/protection_keys.c
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240822151113.1479789-25-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add new system registers:
- POR_EL1
- POR_EL0
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240822151113.1479789-31-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Some test scripts are missing executable permissions. It causes warnings
that make the test output unnecessarily verbose. Add executable
permissions.
Link: https://lkml.kernel.org/r/20240827030336.7930-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Python-based tests creates __pycache__/ directory. Remove it with 'make
clean' by defining it as EXTRA_CLEAN.
Link: https://lkml.kernel.org/r/20240827030336.7930-3-sj@kernel.org
Fixes: b5906f5f7359 ("selftests/damon: add a test for update_schemes_tried_regions sysfs command")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "misc fixups for DAMON {self,kunit} tests".
This patchset is for minor fixups of DAMON selftests and kunit tests.
First three patches make DAMON selftests more cleanly maintained (patches
1 and 2) without unnecessary warnings (patch 3). Following six patches
remove unnecessary test case (patch 4), handle configs combinations that
can make tests fail (patches 5-7), reorganize the test files following the
new guideline (patch 8), and add reference kunitconfig for DAMON kunit
tests (patch 9).
This patch (of 9):
DAMON selftests build access_memory_even, but its not on the .gitignore
list. Add it to make 'git status' output cleaner.
Link: https://lkml.kernel.org/r/20240827030336.7930-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240827030336.7930-2-sj@kernel.org
Fixes: c94df805c774 ("selftests/damon: implement a program for even-numbered memory regions access")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In commit 714965ca8252 ("mm/mmap: start distinguishing if vma can be
removed in mergeability test") we relaxed the VMA merge rules for VMAs
possessing a vm_ops->close() hook, permitting this operation in instances
where we wouldn't delete the VMA as part of the merge operation.
This was later corrected in commit fc0c8f9089c2 ("mm, mmap: fix
vma_merge() case 7 with vma_ops->close") to account for a subtle case that
the previous commit had not taken into account.
In both instances, we first rely on is_mergeable_vma() to determine
whether we might be dealing with a VMA that might be removed, taking
advantage of the fact that a 'previous' VMA will never be deleted, only
VMAs that follow it.
The second patch corrects the instance where a merge of the previous VMA
into a subsequent one did not correctly check whether the subsequent VMA
had a vm_ops->close() handler.
Both changes prevent merge cases that are actually permissible (for
instance a merge of a VMA into a following VMA with a vm_ops->close(), but
with no previous VMA, which would result in the next VMA being extended,
not deleted).
In addition, both changes fail to consider the case where a VMA that would
otherwise be merged with the previous and next VMA might have
vm_ops->close(), on the assumption that for this to be the case, all three
would have to have the same vma->vm_file to be mergeable and thus the same
vm_ops.
And in addition both changes operate at 50,000 feet, trying to guess
whether a VMA will be deleted.
As we have majorly refactored the VMA merge operation and de-duplicated
code to the point where we know precisely where deletions will occur, this
patch removes the aforementioned checks altogether and instead explicitly
checks whether a VMA will be deleted.
In cases where a reduced merge is still possible (where we merge both
previous and next VMA but the next VMA has a vm_ops->close hook, meaning
we could just merge the previous and current VMA), we do so, otherwise the
merge is not permitted.
We take advantage of our userland testing to assert that this functions
correctly - replacing the previous limited vm_ops->close() tests with
tests for every single case where we delete a VMA.
We also update all testing for both new and modified VMAs to set
vma->vm_ops->close() in every single instance where this would not prevent
the merge, to assert that we never do so.
Link: https://lkml.kernel.org/r/9f96b8cfeef3d14afabddac3d6144afdfbef2e22.1725040657.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The existing vma_merge() function is no longer required to handle what
were previously referred to as cases 1-3 (i.e. the merging of a new VMA),
as this is now handled by vma_merge_new_vma().
Additionally, simplify the convoluted control flow of the original,
maintaining identical logic only expressed more clearly and doing away
with a complicated set of cases, rather logically examining each possible
outcome - merging of both the previous and subsequent VMA, merging of the
previous VMA and merging of the subsequent VMA alone.
We now utilise the previously implemented commit_merge() function to share
logic with vma_expand() de-duplicating code and providing less surface
area for bugs and confusion. In order to do so, we adjust this function
to accept parameters specific to merging existing ranges.
Link: https://lkml.kernel.org/r/2cf6016b7bfcc4965fc3cde10827560c42e4f12c.1725040657.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Abstract vma_merge_new_vma() to use vma_merge_struct and rename the
resultant function vma_merge_new_range() to be clear what the purpose of
this function is - a new VMA is desired in the specified range, and we
wish to see if it is possible to 'merge' surrounding VMAs into this range
rather than having to allocate a new VMA.
Note that this function uses vma_extend() exclusively, so adopts its
requirement that the iterator point at or before the gap. We add an
assert to this effect.
This is as opposed to vma_merge_existing_range(), which will be introduced
in a subsequent commit, and provide the same functionality for cases in
which we are modifying an existing VMA.
In mmap_region() and do_brk_flags() we open code scenarios where we prefer
to use vma_expand() rather than invoke a full vma_merge() operation.
Abstract this logic and eliminate all of the open-coding, and also use the
same logic for all cases where we add new VMAs to, rather than ultimately
use vma_merge(), rather use vma_expand().
Doing so removes duplication and simplifies VMA merging in all such cases,
laying the ground for us to eliminate the merging of new VMAs in
vma_merge() altogether.
Also add the ability for the vmg to track state, and able to report
errors, allowing for us to differentiate a failed merge from an inability
to allocate memory in callers.
This makes it far easier to understand what is happening in these cases
avoiding confusion, bugs and allowing for future optimisation.
Also introduce vma_iter_next_rewind() to allow for retrieval of the next,
and (optionally) the prev VMA, rewinding to the start of the previous gap.
Introduce are_anon_vmas_compatible() to abstract individual VMA anon_vma
comparison for the case of merging on both sides where the anon_vma of the
VMA being merged maybe compatible with prev and next, but prev and next's
anon_vma's may not be compatible with each other.
Finally also introduce can_vma_merge_left() / can_vma_merge_right() to
check adjacent VMA compatibility and that they are indeed adjacent.
Link: https://lkml.kernel.org/r/49d37c0769b6b9dc03b27fe4d059173832556392.1725040657.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The purpose of the vmg is to thread merge state through functions and
avoid egregious parameter lists. We expand this to vma_expand(), which is
used for a number of merge cases.
Accordingly, adjust its callers, mmap_region() and relocate_vma_down(), to
use a vmg.
An added purpose of this change is the ability in a future commit to
perform all new VMA range merging using vma_expand().
Link: https://lkml.kernel.org/r/4bc8c9dbc9ca52452ef8e587b28fe555854ceb38.1725040657.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Rather than passing around huge numbers of parameters to numerous helper
functions, abstract them into a single struct that we thread through the
operation, the vma_merge_struct ('vmg').
Adjust vma_merge() and vma_modify() to accept this parameter, as well as
predicate functions can_vma_merge_before(), can_vma_merge_after(), and the
vma_modify_...() helper functions.
Also introduce VMG_STATE() and VMG_VMA_STATE() helper macros to allow for
easy vmg declaration.
We additionally remove the requirement that vma_merge() is passed a VMA
object representing the candidate new VMA. Previously it used this to
obtain the mm_struct, file and anon_vma properties of the proposed range
(a rather confusing state of affairs), which are now provided by the vmg
directly.
We also remove the pgoff calculation previously performed vma_modify(),
and instead calculate this in VMG_VMA_STATE() via the vma_pgoff_offset()
helper.
Link: https://lkml.kernel.org/r/a955aad09d81329f6fbeb636b2dd10cde7b73dab.1725040657.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a variety of VMA merge unit tests to assert that the behaviour of VMA
merge is correct at an abstract level and VMAs are merged or not merged as
expected.
These are intentionally added _before_ we start refactoring vma_merge() in
order that we can continually assert correctness throughout the rest of
the series.
In order to reduce churn going forward, we backport the vma_merge_struct
data type to the test code which we introduce and use in a future commit,
and add wrappers around the merge new and existing VMA cases.
Link: https://lkml.kernel.org/r/1c7a0b43cfad2c511a6b1b52f3507696478ff51a.1725040657.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: remove vma_merge()", v3.
The infamous vma_merge() function has been the cause of a great deal of
pain, bugs and confusion for a very long time.
It is subtle, contains many corner cases, tries to do far too much and is
as a result very fragile.
The fact that the function requires there to be a numbering system to
cover each possible eventuality with references to each in the many
branches of its implementation as to which case you are looking at speaks
to all this.
Some of this complexity is inherent - unfortunately there is no getting
away from the need to figure out precisely how to execute the merge,
whether we need to remove VMAs, whether it is safe to do so, what
constitutes a mergeable VMA and so on.
However, a lot of the complexity is not inherent but instead a product of
the function's 'organic' development.
Liam has gone to great lengths to improve the situation as a part of his
maple tree implementation, greatly improving the readability of the code,
and Vlastimil and myself have additionally gone to lengths to try to
improve things further.
However, with the availability of userland VMA testing, it now becomes
possible to perform a rather more significant refactoring while
maintaining confidence in its correct operation.
An attempt was previously made by Vlastimil [0] to eliminate vma_merge(),
however it was rather - brutal - and an astute reader might refer to the
date of that patch for insight as to its intent.
This series instead divides merge operations into two natural kinds -
merges which occur when a NEW vma is being added to the address space, and
merges which occur when a vma is being MODIFIED.
Happily, the vma_expand() function introduced by Liam, which has the
capacity for also deleting a subsequent VMA, covers each of the NEW vma
cases.
By abstracting the actual final commit of changes to a VMA to its own
function, commit_merge() and writing a wrapper around vma_expand() for new
VMA cases vma_merge_new_range(), we can avoid having to use vma_merge()
for these instances altogether.
By doing so we are also able to then de-duplicate all existing merge logic
in mmap_region() and do_brk_flags() and have everything invoke this new
function, so we universally take the same approach to merging new VMAs.
Having done so, we can then completely rework vma_merge() into
vma_merge_existing_range() and use this for the instances where a merge is
proposed for a region of an existing VMA.
This eliminates vma_merge() and its numbered cases and instead divides
things into logical cases - merge both, merge left, merge right (the
latter 2 being either partial or full merges).
The code is heavily annotated with ASCII diagrams and greatly simplified
in comparison to the existing vma_merge() function.
Having made this change, we take the opportunity to address an issue with
merging VMAs possessing a vm_ops->close() hook - commit 714965ca8252
("mm/mmap: start distinguishing if vma can be removed in mergeability
test") and commit fc0c8f9089c2 ("mm, mmap: fix vma_merge() case 7 with
vma_ops->close") make efforts to relax how we handle these, making
assumptions about which VMAs might end up deleted (and thus, if possessing
a vm_ops->close() hook, cannot be).
This refactor means we do not need to guess, so instead explicitly only
disallow merge in instances where a VMA with a vm_ops->close() hook would
be deleted (and try a smaller merge in cases where this is possible).
In addition to these changes, we introduce a new vma_merge_struct
abstraction to allow VMA merge state to be threaded through the operation
neatly.
There is heavy unit testing provided for all merge functionality, added
prior to the refactoring, allowing for before/after testing.
The vm_ops->close() change also introduces exhaustive testing to
demonstrate that this functions as expected, and in addition to this the
reproduction code from commit fc0c8f9089c2 ("mm, mmap: fix vma_merge()
case 7 with vma_ops->close") was tested and confirmed passing.
[0]:https://lore.kernel.org/linux-mm/20240401192623.18575-2-vbabka@suse.cz/
This patch (of 10):
Have vma.o depend on its source dependencies explicitly, as previously
these were simply being ignored as existing object files were up to date.
This now correctly re-triggers the build if mm/ source is changed as well
as local source code.
Also set clean as a phony rule.
Link: https://lkml.kernel.org/r/cover.1725040657.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/e3ea58f08364ae5432c9a074de0195a7c7e0b04a.1725040657.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Ensure that zswap.writeback check goes up the cgroup tree, i.e. is
hierarchical. Create a subcgroup which has zswap.writeback set to 1, and
the upper hierarchy's restrictions shall apply.
Link: https://lkml.kernel.org/r/20240823162506.12117-2-me@yhndnzj.com
Signed-off-by: Mike Yuan <me@yhndnzj.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, running the charge_reserved_hugetlb.sh selftest we can
sometimes observe something like:
$ ./charge_reserved_hugetlb.sh -cgroup-v2
...
write_result is 0
After write:
hugetlb_usage=0
reserved_usage=10485760
killing write_to_hugetlbfs
Received 2.
Deleting the memory
Detach failure: Invalid argument
umount: /mnt/huge: target is busy.
Both cases are issues in the test.
While the unmount error seems to be racy, it will make the test fail:
$ ./run_vmtests.sh -t hugetlb
...
# [FAIL]
not ok 10 charge_reserved_hugetlb.sh -cgroup-v2 # exit=32
The issue is that we are not waiting for the write_to_hugetlbfs process to
quit. So it might still have a hugetlbfs file open, about which umount is
not happy. Fix that by making "killall" wait for the process to quit.
The other error ("Detach failure: Invalid argument") does not seem to
result in a test error, but is misleading. Turns out write_to_hugetlbfs.c
unconditionally tries to cleanup using shmdt(), even when we only
mmap()'ed a hugetlb file. Even worse, shmaddr is never even set for the
SHM case. Fix that as well.
With this change it seems to work as expected.
Link: https://lkml.kernel.org/r/20240821123115.2068812-1-david@redhat.com
Fixes: 29750f71a9b4 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add more mseal traversal tests across VMAs, where we could possibly screw
up sealing checks. These test more across-vma traversal for mprotect,
munmap and madvise. Particularly, we test for the case where a regular
VMA is followed by a sealed VMA.
[akpm@linux-foundation.org: remove incorrect comment, per review]
[akpm@linux-foundation.org: remove the correct comment, per Pedro]
[pedro.falcato@gmail.com: fix mseal's length]
Link: https://lkml.kernel.org/r/vc4czyuemmu3kylqb4ctaga6y5yvondlyabimx6jvljlw2fkea@djawlllf45xa
Link: https://lkml.kernel.org/r/20240817-mseal-depessimize-v3-7-d8d2e037df30@gmail.com
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add shmem mTHP collpase testing. Similar to the anonymous page, users can
use the '-s' parameter to specify the shmem mTHP size for testing.
Link: https://lkml.kernel.org/r/fa44bfa20ca5b9fd6f9163a048f3d3c1e53cd0a8.1724140601.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
IA64 has gone with commit cf8e8658100d ("arch: Remove Itanium (IA-64)
architecture"), so remove unnecessary ia64 special mm code and comment in
selftests too.
Link: https://lkml.kernel.org/r/20240819130609.3386195-1-tujinjiang@huawei.com
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The name of cxl_setup_parent_dport() function is not clear, the function
is used to initialize AER and RAS capabilities on a dport, therefore,
rename the function to cxl_dport_init_ras_reporting(), it is easier for
user to understand what the function does. Besides, adjust the order of
the function parameters, the subject of cxl_dport_init_ras_reporting()
is a cxl dport, so a struct cxl_dport as the first parameter of the
function should be better.
cxl_dport_map_regs() is used to map CXL RAS capability on a cxl dport,
using cxl_dport_map_ras() as the function name.
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240830061308.2327065-1-ming4.li@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
'MPTCP_PM_NAME' is defined in 'linux/mptcp_pm.h', included in
'linux/mptcp.h', no need to re-define it.
'MPTCP_PM_EVENTS' is not defined in 'linux/mptcp.h', but
'MPTCP_PM_EV_GRP_NAME' is, with the same value. We can then use the
latter, and drop the other one.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-11-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The four checksum tests are similar, only one line is different. So
a for-loop can be used to simplify these tests.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-10-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test is supposed to be killed before the end, which will likely
cause "Connection reset by peer" errors. It is confusing, especially
because in case of real transfer errors, the test will not be marked as
failed. But that's OK, there are many other tests checking that.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-9-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of displaying 'invert' when looking at some events like MP_FAIL,
MP_FASTCLOSE, MP_RESET, RM_ADDR, which is a bit vague because they are
not traditionnaly sent from one side, the host being checked is now
printed.
For the ADD_ADDR, only display the host when it is the client sending
it, which is more unusual.
Also before, the 'invert' message was printed after a few checks, but it
was not clear which ones exactly.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-8-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before, the check names had to be very short. It is no longer the case
now that these checks are printed on a dedicated line.
Then, it looks better to have more explicit names.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-7-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A few new MPJoinSynTx MIB counters have been added in a previous commit.
They are being validated here in mptcp_join.sh selftest, each time the
number of received MPJ are checked.
Most of the time, the number of sent SYN+MPJ is the same as the received
ones. But sometimes, there are more, because there are dropped, or there
are errors.
While at it, the "no MPC reuse with single endpoint" subtest has been
modified to force a bind() error.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-6-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Most tests are checking if the expected number of SYN/SYN+ACK/ACK JOINs
have been received, each of them on one line.
More Join related tests are going to be checked soon, no need to add 5
new lines per test in case of success, just one is enough. In case of
issue, the errors will still be reported like before.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-5-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
chk_join_nr() currently takes 9 positional parameters, 6 of them are
optional. It makes it hard to read:
chk_join_nr 1 1 1 1 0 1 1 0 4
Naming these vars helps to make it easier to read:
join_csum_ns1=1 join_csum_ns2=0 \
join_fail_nr=1 join_rst_nr=1 join_infi_nr=0 \
join_corrupted_pkts=4 \
chk_join_nr 1 1 1
It will then be easier to add new optional parameters.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-4-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use dev_is_platform() instead of checking bus type directly.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240827095123.168696-1-kunwu.chan@linux.dev
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Add return value checks for read & write calls in test_listmount_ns
function. This patch resolves below compilation warnings:
```
statmount_test_ns.c: In function ‘test_listmount_ns’:
statmount_test_ns.c:322:17: warning: ignoring return value of ‘write’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
statmount_test_ns.c:323:17: warning: ignoring return value of ‘read’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
```
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The sctp selftest is very slow on debug kernels.
Its possible that the nf_queue listener program exits due to timeout
before first sctp packet is processed.
In this case socat hangs until script times out.
Fix this by removing the -t option where possible and kill the test
program once the file transfer/socat has exited.
-t sets SO_RCVTIMEO, its inteded for the 'ping' part of the selftest
where we want to make sure that packets get reinjected properly without
skipping a second queue request.
While at it, add a helper to compare the (binary) files instead of diff.
The 'diff' part was copied from a another sub-test that compares text.
Let helper dump file sizes on error so we can see the progress made.
Tested on an old 2010-ish box with a debug kernel and 100 iterations.
This is a followup to the earlier filesize reduction change.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240829080109.GB30766@breakpoint.cc/
Fixes: 0a8b08c554da ("selftests: netfilter: nft_queue.sh: reduce test file size for debug build")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20240830092254.8029-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
"Interface can't change network namespaces" is rather an attribute,
not a feature, and it can't be changed via Ethtool.
Make it a "cold" private flag instead of a netdev_feature and free
one more bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Change the file permissions of tools/testing/fault-injection/failcmd.sh to
allow execution. This ensures the script can be run directly without
explicitly invoking a shell.
Link: https://lkml.kernel.org/r/20240729085215.3403417-1-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The failcmd.sh script in the fault-injection toolkit does not currently
validate whether the provided address is in hexadecimal format. This can
lead to silent failures if the address is sourced from places like
`/proc/kallsyms`, which omits the '0x' prefix, potentially causing users
to operate under incorrect assumptions.
Introduce a new function, `exit_if_not_hex`, which checks the format of
the provided address and exits with an error message if the address is not
a valid hexadecimal number.
This enhancement prevents users from running the command with improperly
formatted addresses, thus improving the robustness and usability of the
failcmd tool.
Link: https://lkml.kernel.org/r/20240729084512.3349928-1-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Separate call to mas_destroy() from mas_nomem() so we can check for no
memory errors without destroying the current maple state in
mas_store_gfp(). We then add calls to mas_destroy() to callers of
mas_nomem().
Link: https://lkml.kernel.org/r/20240814161944.55347-6-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce mas_wr_store_type() which will set the correct store type based
on a walk of the tree. In mas_wr_node_store() the <= min_slots condition
is changed to < as if new_end is = to mt_min_slots then there is not
enough room.
mas_prealloc_calc() is also introduced to abstract the calculation used to
determine the number of nodes needed for a store operation.
In this change a call to mas_reset() is removed in the error case of
mas_prealloc(). This is only needed in the MA_STATE_REBALANCE case of
mas_destroy(). We can move the call to mas_reset() directly to
mas_destroy().
Also, add a test case to validate the order that we check the store type
in is correct. This test models a vma expanding and then shrinking which
is part of the boot process.
Link: https://lkml.kernel.org/r/20240814161944.55347-5-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add new callback fields to the userspace implementation of struct
kmem_cache. This allows for executing callback functions in order to
further test low memory scenarios where node allocation is retried.
This callback can help test race conditions by calling a function when a
low memory event is tested.
Link: https://lkml.kernel.org/r/20240812190543.71967-2-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Make accept_memory() and range_contains_unaccepted_memory() take 'start'
and 'size' arguments instead of 'start' and 'end'.
Remove accept_page(), replacing it with direct calls to accept_memory().
The accept_page() name is going to be used for a different function.
Link: https://lkml.kernel.org/r/20240809114854.3745464-6-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
the syscall remap accepts following:
mremap(src, size, size, MREMAP_MAYMOVE | MREMAP_DONTUNMAP, dst)
when the src is sealed, the call will fail with error code:
EPERM
Previously, the test uses hard-coded 0xdeaddead as dst, and it
will fail on the system with newer glibc installed.
This patch removes test's dependency on glibc for mremap(), also
fix the test and remove the hardcoded address.
Link: https://lkml.kernel.org/r/20240807212320.2831848-1-jeffxu@chromium.org
Fixes: 4926c7a52de7 ("selftest mm/mseal memory sealing")
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reported-by: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add an mseal test for madvise() operations that aren't considered
"discard" (e.g purely advisory ops such as MADV_RANDOM).
[pedro.falcato@gmail.com: adjust the mseal test's plan]
Link: https://lkml.kernel.org/r/20240807203724.2686144-1-pedro.falcato@gmail.com
Link: https://lkml.kernel.org/r/20240807173336.2523757-3-pedro.falcato@gmail.com
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Tested-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Jeff Xu <jeffxu@chromium.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Establish a new userland VMA unit testing implementation under
tools/testing which utilises existing logic providing maple tree support
in userland utilising the now-shared code previously exclusive to radix
tree testing.
This provides fundamental VMA operations whose API is defined in mm/vma.h,
while stubbing out superfluous functionality.
This exists as a proof-of-concept, with the test implementation functional
and sufficient to allow userland compilation of vma.c, but containing only
cursory tests to demonstrate basic functionality.
Link: https://lkml.kernel.org/r/533ffa2eec771cbe6b387dd049a7f128a53eb616.1722251717.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: SeongJae Park <sj@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Gow <davidgow@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kees Cook <kees@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rae Moar <rmoar@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The core components contained within the radix-tree tests which provide
shims for kernel headers and access to the maple tree are useful for
testing other things, so separate them out and make the radix tree tests
dependent on the shared components.
This lays the groundwork for us to add VMA tests of the newly introduced
vma.c file.
Link: https://lkml.kernel.org/r/1ee720c265808168e0d75608e687607d77c36719.1722251717.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Gow <davidgow@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kees Cook <kees@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rae Moar <rmoar@google.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Extend two existing tests to cover extracting memory usage through the
newly mutable memory.peak and memory.swap.peak handlers.
In particular, make sure to exercise adding and removing watchers with
overlapping lifetimes so the less-trivial logic gets tested.
The new/updated tests attempt to detect a lack of the write handler by
fstat'ing the memory.peak and memory.swap.peak files and skip the tests if
that's the case. Additionally, skip if the file doesn't exist at all.
[davidf@vimeo.com: update tests]
Link: https://lkml.kernel.org/r/20240730231304.761942-3-davidf@vimeo.com
Link: https://lkml.kernel.org/r/20240729143743.34236-3-davidf@vimeo.com
Signed-off-by: David Finkel <davidf@vimeo.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The __NR_mmap isn't found on armhf. The mmap() is commonly available
system call and its wrapper is present on all architectures. So it should
be used directly. It solves problem for armhf and doesn't create problem
for other architectures.
Remove sys_mmap() functions as they aren't doing anything else other than
calling mmap(). There is no need to set errno = 0 manually as glibc
always resets it.
For reference errors are as following:
CC seal_elf
seal_elf.c: In function 'sys_mmap':
seal_elf.c:39:33: error: '__NR_mmap' undeclared (first use in this function)
39 | sret = (void *) syscall(__NR_mmap, addr, len, prot,
| ^~~~~~~~~
mseal_test.c: In function 'sys_mmap':
mseal_test.c:90:33: error: '__NR_mmap' undeclared (first use in this function)
90 | sret = (void *) syscall(__NR_mmap, addr, len, prot,
| ^~~~~~~~~
Link: https://lkml.kernel.org/r/20240809082511.497266-1-usama.anjum@collabora.com
Fixes: 4926c7a52de7 ("selftest mm/mseal memory sealing")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There is only hotplug test for cpuset v1, just add base read/write test
for cpuset v1.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Since isolated CPUs can be reserved at boot time via the "isolcpus"
boot command line option, these pre-isolated CPUs may interfere with
testing done by test_cpuset_prs.sh.
With the previous commit that incorporates those boot time isolated CPUs
into "cpuset.cpus.isolated", we can check for those before testing is
started to make sure that there will be no interference. Otherwise,
this test will be skipped if incorrect test failure can happen.
As "cpuset.cpus.isolated" is now available in a non cgroup_debug kernel,
we don't need to check for its existence anymore.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
