| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bpf.
Still trending up in size but the good news is that the "current"
regressions are resolved, AFAIK.
We're getting weirdly many fixes for Wake-on-LAN and suspend/resume
handling on embedded this week (most not merged yet), not sure why.
But those are all for older bugs.
Current release - regressions:
- tls: set MSG_SPLICE_PAGES consistently when handing encrypted data
over to TCP
Current release - new code bugs:
- eth: mlx5: correct IDs on VFs internal to the device (IPU)
Previous releases - regressions:
- phy: at803x: fix WoL support / reporting on AR8032
- bonding: fix incorrect deletion of ETH_P_8021AD protocol VID from
slaves, leading to BUG_ON()
- tun: prevent tun_build_skb() from exceeding the packet size limit
- wifi: rtw89: fix 8852AE disconnection caused by RX full flags
- eth/PCI: enetc: fix probing after 6fffbc7ae137 ("PCI: Honor
firmware's device disabled status"), keep PCI devices around even
if they are disabled / not going to be probed to be able to apply
quirks on them
- eth: prestera: fix handling IPv4 routes with nexthop IDs
Previous releases - always broken:
- netfilter: re-work garbage collection to avoid races between
user-facing API and timeouts
- tunnels: fix generating ipv4 PMTU error on non-linear skbs
- nexthop: fix infinite nexthop bucket dump when using maximum
nexthop ID
- wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems()
Misc:
- unix: use consistent error code in SO_PEERPIDFD
- ipv6: adjust ndisc_is_useropt() to include PREFIX_INFO, in prep for
upcoming IETF RFC"
* tag 'net-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
net: hns3: fix strscpy causing content truncation issue
net: tls: set MSG_SPLICE_PAGES consistently
ibmvnic: Ensure login failure recovery is safe from other resets
ibmvnic: Do partial reset on login failure
ibmvnic: Handle DMA unmapping of login buffs in release functions
ibmvnic: Unmap DMA login rsp buffer on send login fail
ibmvnic: Enforce stronger sanity checks on login response
net: mana: Fix MANA VF unload when hardware is unresponsive
netfilter: nf_tables: remove busy mark and gc batch API
netfilter: nft_set_hash: mark set element as dead when deleting from packet path
netfilter: nf_tables: adapt set backend to use GC transaction API
netfilter: nf_tables: GC transaction API to avoid race with control plane
selftests/bpf: Add sockmap test for redirecting partial skb data
selftests/bpf: fix a CI failure caused by vsock sockmap test
bpf, sockmap: Fix bug that strp_done cannot be called
bpf, sockmap: Fix map type error in sock_map_del_link
xsk: fix refcount underflow in error path
ipv6: adjust ndisc_is_useropt() to also return true for PIO
selftests: forwarding: bridge_mdb: Make test more robust
selftests: forwarding: bridge_mdb_max: Fix failing test with old libnet
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Martin KaFai Lau says:
====================
pull-request: bpf 2023-08-09
We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 6 files changed, 102 insertions(+), 8 deletions(-).
The main changes are:
1) A bpf sockmap memleak fix and a fix in accessing the programs of
a sockmap under the incorrect map type from Xu Kuohai.
2) A refcount underflow fix in xsk from Magnus Karlsson.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add sockmap test for redirecting partial skb data
selftests/bpf: fix a CI failure caused by vsock sockmap test
bpf, sockmap: Fix bug that strp_done cannot be called
bpf, sockmap: Fix map type error in sock_map_del_link
xsk: fix refcount underflow in error path
====================
Link: https://lore.kernel.org/r/20230810055303.120917-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test case to check whether sockmap redirection works correctly
when data length returned by stream_parser is less than skb->len.
In addition, this test checks whether strp_done is called correctly.
The reason is that we returns skb->len - 1 from the stream_parser, so
the last byte in the skb will be held by strp->skb_head. Therefore,
if strp_done is not called to free strp->skb_head, we'll get a memleak
warning.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20230804073740.194770-5-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
BPF CI has reported the following failure:
Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir
Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir
./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1506: ingress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1514: ingress: recv() err, errno=11
vsock_unix_redir_connectible:FAIL:1514
./test_progs:vsock_unix_redir_connectible:1518: ingress: vsock socket map failed, a != b
vsock_unix_redir_connectible:FAIL:1518
./test_progs:vsock_unix_redir_connectible:1525: ingress: want pass count 1, have 0
It’s because the recv(... MSG_DONTWAIT) syscall in the test case is
called before the queued work sk_psock_backlog() in the kernel finishes
executing. So the data to be read is still queued in psock->ingress_skb
and cannot be read by the user program. Therefore, the non-blocking
recv() reads nothing and reports an EAGAIN error.
So replace recv(... MSG_DONTWAIT) with xrecv_nonblock(), which calls
select() to wait for data to be readable or timeout before calls recv().
Fixes: d61bd8c1fd02 ("selftests/bpf: add a test case for vsock sockmap")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20230804073740.194770-4-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
The reason behind commit af7b29b1deaa ("Revert "net/sched: taprio: make
qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"") was that the
patch it reverted caused a crash when attaching a CBS shaper to one of
the taprio classes. Prevent that from happening again by adding a test
case for it, which now passes correctly in both offload and software
modes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-12-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check that the "Can only be attached as root qdisc" error message from
taprio is effective by attempting to attach it to a class of another
taprio qdisc. That operation should fail.
In the bug that was squashed by change "net/sched: taprio: try again to
report q->qdiscs[] to qdisc_leaf()", grafting a child taprio to a root
software taprio would be misinterpreted as a change() to the root
taprio. Catch this by looking at whether the base-time of the root
taprio has changed to follow the base-time of the child taprio,
something which should have absolutely never happened assuming correct
semantics.
Vinicius points out that looking at "base_time" in the tc qdisc show
output is unreliable because user space is in a race with the kernel
applying the setting. So we create a helper bash script which waits
while there is any pending schedule.
Link: https://lore.kernel.org/netdev/87il9w0xx7.fsf@intel.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-11-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For offloaded tc-taprio testing with netdevsim, the mock-up PHC driver
is used.
Suggested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-10-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This makes a difference for the software scheduling mode, where
dev_queue->qdisc_sleeping is the same as the taprio root Qdisc itself,
but when we're talking about what Qdisc and stats get reported for a
traffic class, the root taprio isn't what comes to mind, but q->qdiscs[]
is.
To understand the difference, I've attempted to send 100 packets in
software mode through class 8001:5, and recorded the stats before and
after the change.
Here is before:
$ tc -s class show dev eth0
class taprio 8001:1 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:2 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:3 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:4 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:5 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:6 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:7 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:8 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
and here is after:
class taprio 8001:1 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:2 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:3 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:4 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:5 root
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:6 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:7 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:8 root leaf 800d:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
The most glaring (and expected) difference is that before, all class
stats reported the global stats, whereas now, they really report just
the counters for that traffic class.
Finally, Pedro Tammela points out that there is a tc selftest which
checks specifically which handle do the child Qdiscs corresponding to
each class have. That's changing here - taprio no longer reports
tcm->tcm_info as the same handle "1:" as itself (the root Qdisc), but 0
(the handle of the default pfifo child Qdiscs). Since iproute2 does not
print a child Qdisc handle of 0, adjust the test's expected output.
Link: https://lore.kernel.org/netdev/3b83fcf6-a5e8-26fb-8c8a-ec34ec4c3342@mojatatu.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a selftest to verify enslavement to a LAG with upper after fresh
devlink reload.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/373a7754daa4dac32759a45095f47b08a2a869c8.1691498735.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some test cases check that the group timer is (or isn't) 0. Instead of
grepping for "0.00" grep for " 0.00" as the former can also match
"260.00" which is the default group membership interval.
Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-18-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained in commit 8bcfb4ae4d97 ("selftests: forwarding: Fix failing
tests with old libnet"), old versions of libnet (used by mausezahn) do
not use the "SO_BINDTODEVICE" socket option. For IP unicast packets,
this can be solved by prefixing mausezahn invocations with "ip vrf
exec". However, IP multicast packets do not perform routing and simply
egress the bound device, which does not exist in this case.
Fix by specifying the source and destination MAC of the packet which
will cause mausezahn to use a packet socket instead of an IP socket.
Fixes: 3446dcd7df05 ("selftests: forwarding: bridge_mdb_max: Add a new selftest")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-17-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained in commit 8bcfb4ae4d97 ("selftests: forwarding: Fix failing
tests with old libnet"), old versions of libnet (used by mausezahn) do
not use the "SO_BINDTODEVICE" socket option. For IP unicast packets,
this can be solved by prefixing mausezahn invocations with "ip vrf
exec". However, IP multicast packets do not perform routing and simply
egress the bound device, which does not exist in this case.
Fix by specifying the source and destination MAC of the packet which
will cause mausezahn to use a packet socket instead of an IP socket.
Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-16-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained in commit 8bcfb4ae4d97 ("selftests: forwarding: Fix failing
tests with old libnet"), old versions of libnet (used by mausezahn) do
not use the "SO_BINDTODEVICE" socket option. For IP unicast packets,
this can be solved by prefixing mausezahn invocations with "ip vrf
exec". However, IP multicast packets do not perform routing and simply
egress the bound device, which does not exist in this case.
Fix by specifying the source and destination MAC of the packet which
will cause mausezahn to use a packet socket instead of an IP socket.
Fixes: 8c33266ae26a ("selftests: forwarding: Add layer 2 miss test cases")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-15-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test installs filters that match on various IP fragments (e.g., no
fragment, first fragment) and expects a certain amount of packets to hit
each filter. This is problematic as the filters are not specific enough
and can match IP packets (e.g., IGMP) generated by the stack, resulting
in failures [1].
Fix by making the filters more specific and match on more fields in the
IP header: Source IP, destination IP and protocol.
[1]
# timeout set to 0
# selftests: net/forwarding: tc_tunnel_key.sh
# TEST: tunnel_key nofrag (skip_hw) [FAIL]
# packet smaller than MTU was not tunneled
# INFO: Could not test offloaded functionality
not ok 89 selftests: net/forwarding: tc_tunnel_key.sh # exit=1
Fixes: 533a89b1940f ("selftests: forwarding: add tunnel_key "nofrag" test case")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-14-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test checks that filters that match on source or destination MAC
were only hit once. A host can send more than one packet with a given
source or destination MAC, resulting in failures.
Fix by relaxing the success criterion and instead check that the filters
were not hit zero times. Using tc_check_at_least_x_packets() is also an
option, but it is not available in older kernels.
Fixes: 07e5c75184a1 ("selftests: forwarding: Introduce tc flower matching tests")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-13-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test relies on 'nc' being the netcat version from the nmap project.
While this seems to be the case on Fedora, it is not the case on Ubuntu,
resulting in failures such as [1].
Fix by explicitly using the 'ncat' utility from the nmap project and the
skip the test in case it is not installed.
[1]
# timeout set to 0
# selftests: net/forwarding: tc_actions.sh
# TEST: gact drop and ok (skip_hw) [ OK ]
# TEST: mirred egress flower redirect (skip_hw) [ OK ]
# TEST: mirred egress flower mirror (skip_hw) [ OK ]
# TEST: mirred egress matchall mirror (skip_hw) [ OK ]
# TEST: mirred_egress_to_ingress (skip_hw) [ OK ]
# nc: invalid option -- '-'
# usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl]
# [-m minttl] [-O length] [-P proxy_username] [-p source_port]
# [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit]
# [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]]
# [destination] [port]
# nc: invalid option -- '-'
# usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl]
# [-m minttl] [-O length] [-P proxy_username] [-p source_port]
# [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit]
# [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]]
# [destination] [port]
# TEST: mirred_egress_to_ingress_tcp (skip_hw) [FAIL]
# server output check failed
# INFO: Could not test offloaded functionality
not ok 80 selftests: net/forwarding: tc_actions.sh # exit=1
Fixes: ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-12-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MAC Merge cannot be tested with veth pairs, resulting in failures:
# ./ethtool_mm.sh
[...]
TEST: Manual configuration with verification: swp1 to swp2 [FAIL]
Verification did not succeed
Fix by skipping the test when the interfaces do not support MAC Merge.
Fixes: e6991384ace5 ("selftests: forwarding: add a test for MAC Merge layer")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-11-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Layer 3 hardware stats cannot be used when the underlying interfaces are
veth pairs, resulting in failures:
# ./hw_stats_l3_gre.sh
TEST: ping gre flat [ OK ]
TEST: Test rx packets: [FAIL]
Traffic not reflected in the counter: 0 -> 0
TEST: Test tx packets: [FAIL]
Traffic not reflected in the counter: 0 -> 0
Fix by skipping the test when used with veth pairs.
Fixes: 813f97a26860 ("selftests: forwarding: Add a tunnel-based test for L3 HW stats")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-10-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ethtool extended state cannot be tested with veth pairs, resulting in
failures:
# ./ethtool_extended_state.sh
TEST: Autoneg, No partner detected [FAIL]
Expected "Autoneg", got "Link detected: no"
[...]
Fix by skipping the test when used with veth pairs.
Fixes: 7d10bcce98cd ("selftests: forwarding: Add tests for ethtool extended state")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-9-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Auto-negotiation cannot be tested with veth pairs, resulting in
failures:
# ./ethtool.sh
TEST: force of same speed autoneg off [FAIL]
error in configuration. swp1 speed Not autoneg off
[...]
Fix by skipping the test when used with veth pairs.
Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-8-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A handful of tests require physical loopbacks to be used instead of veth
pairs. Add a helper that these tests will invoke in order to be skipped
when executed with veth pairs.
Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-7-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test uses the 'TROUTE6' environment variable to encode the name of
the IPv6 traceroute utility. By default (without a configuration file),
this variable is not set, resulting in failures:
# ./ip6_forward_instats_vrf.sh
TEST: ping6 [ OK ]
TEST: Ip6InTooBigErrors [ OK ]
TEST: Ip6InHdrErrors [FAIL]
TEST: Ip6InAddrErrors [ OK ]
TEST: Ip6InDiscards [ OK ]
Fix by setting a default utility name and skip the test if the utility
is not present.
Fixes: 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig netdev")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-6-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The selftest relies on iproute2 changes present in version 6.3, but the
test does not check for it, resulting in errors:
# ./bridge_mdb_max.sh
INFO: 802.1d tests
TEST: cfg4: port: ngroups reporting [FAIL]
Number of groups was null, now is null, but 5 expected
TEST: ctl4: port: ngroups reporting [FAIL]
Number of groups was null, now is null, but 5 expected
TEST: cfg6: port: ngroups reporting [FAIL]
Number of groups was null, now is null, but 5 expected
[...]
Fix by skipping the test if iproute2 is too old.
Fixes: 3446dcd7df05 ("selftests: forwarding: bridge_mdb_max: Add a new selftest")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/6b04b2ba-2372-6f6b-3ac8-b7cba1cfae83@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The selftest relies on iproute2 changes present in version 6.3, but the
test does not check for it, resulting in error:
# ./bridge_mdb.sh
INFO: # Host entries configuration tests
TEST: Common host entries configuration tests (IPv4) [FAIL]
Managed to add IPv4 host entry with a filter mode
TEST: Common host entries configuration tests (IPv6) [FAIL]
Managed to add IPv6 host entry with a filter mode
TEST: Common host entries configuration tests (L2) [FAIL]
Managed to add L2 host entry with a filter mode
INFO: # Port group entries configuration tests - (*, G)
Command "replace" is unknown, try "bridge mdb help".
[...]
Fix by skipping the test if iproute2 is too old.
Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/6b04b2ba-2372-6f6b-3ac8-b7cba1cfae83@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The default timeout for selftests is 45 seconds, but it is not enough
for forwarding selftests which can takes minutes to finish depending on
the number of tests cases:
# make -C tools/testing/selftests TARGETS=net/forwarding run_tests
TAP version 13
1..102
# timeout set to 45
# selftests: net/forwarding: bridge_igmp.sh
# TEST: IGMPv2 report 239.10.10.10 [ OK ]
# TEST: IGMPv2 leave 239.10.10.10 [ OK ]
# TEST: IGMPv3 report 239.10.10.10 is_include [ OK ]
# TEST: IGMPv3 report 239.10.10.10 include -> allow [ OK ]
#
not ok 1 selftests: net/forwarding: bridge_igmp.sh # TIMEOUT 45 seconds
Fix by switching off the timeout and setting it to 0. A similar change
was done for BPF selftests in commit 6fc5916cc256 ("selftests: bpf:
Switch off timeout").
Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/8d149f8c-818e-d141-a0ce-a6bae606bc22@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained in [1], the forwarding selftests are meant to be run with
either physical loopbacks or veth pairs. The interfaces are expected to
be specified in a user-provided forwarding.config file or as command
line arguments. By default, this file is not present and the tests fail:
# make -C tools/testing/selftests TARGETS=net/forwarding run_tests
[...]
TAP version 13
1..102
# timeout set to 45
# selftests: net/forwarding: bridge_igmp.sh
# Command line is not complete. Try option "help"
# Failed to create netif
not ok 1 selftests: net/forwarding: bridge_igmp.sh # exit=1
[...]
Fix by skipping a test if interfaces are not provided either via the
configuration file or command line arguments.
# make -C tools/testing/selftests TARGETS=net/forwarding run_tests
[...]
TAP version 13
1..102
# timeout set to 45
# selftests: net/forwarding: bridge_igmp.sh
# SKIP: Cannot create interface. Name not specified
ok 1 selftests: net/forwarding: bridge_igmp.sh # SKIP
[1] tools/testing/selftests/net/forwarding/README
Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/856d454e-f83c-20cf-e166-6dc06cbc1543@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A netlink dump callback can return a positive number to signal that more
information needs to be dumped or zero to signal that the dump is
complete. In the second case, the core netlink code will append the
NLMSG_DONE message to the skb in order to indicate to user space that
the dump is complete.
The nexthop bucket dump callback always returns a positive number if
nexthop buckets were filled in the provided skb, even if the dump is
complete. This means that a dump will span at least two recvmsg() calls
as long as nexthop buckets are present. In the last recvmsg() call the
dump callback will not fill in any nexthop buckets because the previous
call indicated that the dump should restart from the last dumped nexthop
ID plus one.
# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id 10 group 1 type resilient buckets 2
# strace -e sendto,recvmsg -s 5 ip nexthop bucket
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396980, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 128
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 128
id 10 index 0 idle_time 6.66 nhid 1
id 10 index 1 idle_time 6.66 nhid 1
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20
+++ exited with 0 +++
This behavior is both inefficient and buggy. If the last nexthop to be
dumped had the maximum ID of 0xffffffff, then the dump will restart from
0 (0xffffffff + 1) and never end:
# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2
# ip nexthop bucket
id 4294967295 index 0 idle_time 5.55 nhid 1
id 4294967295 index 1 idle_time 5.55 nhid 1
id 4294967295 index 0 idle_time 5.55 nhid 1
id 4294967295 index 1 idle_time 5.55 nhid 1
[...]
Fix by adjusting the dump callback to return zero when the dump is
complete. After the fix only one recvmsg() call is made and the
NLMSG_DONE message is appended to the RTM_NEWNEXTHOPBUCKET responses:
# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2
# strace -e sendto,recvmsg -s 5 ip nexthop bucket
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396737, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 148
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 148
id 4294967295 index 0 idle_time 6.61 nhid 1
id 4294967295 index 1 idle_time 6.61 nhid 1
+++ exited with 0 +++
Note that if the NLMSG_DONE message cannot be appended because of size
limitations, then another recvmsg() will be needed, but the core netlink
code will not invoke the dump callback and simply reply with a
NLMSG_DONE message since it knows that the callback previously returned
zero.
Add a test that fails before the fix:
# ./fib_nexthops.sh -t basic_res
[...]
TEST: Maximum nexthop ID dump [FAIL]
[...]
And passes after it:
# ./fib_nexthops.sh -t basic_res
[...]
TEST: Maximum nexthop ID dump [ OK ]
[...]
Fixes: 8a1bbabb034d ("nexthop: Add netlink handlers for bucket dump")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230808075233.3337922-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A netlink dump callback can return a positive number to signal that more
information needs to be dumped or zero to signal that the dump is
complete. In the second case, the core netlink code will append the
NLMSG_DONE message to the skb in order to indicate to user space that
the dump is complete.
The nexthop dump callback always returns a positive number if nexthops
were filled in the provided skb, even if the dump is complete. This
means that a dump will span at least two recvmsg() calls as long as
nexthops are present. In the last recvmsg() call the dump callback will
not fill in any nexthops because the previous call indicated that the
dump should restart from the last dumped nexthop ID plus one.
# ip nexthop add id 1 blackhole
# strace -e sendto,recvmsg -s 5 ip nexthop
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394315, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 36
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 1], {nla_len=4, nla_type=NHA_BLACKHOLE}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 36
id 1 blackhole
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20
+++ exited with 0 +++
This behavior is both inefficient and buggy. If the last nexthop to be
dumped had the maximum ID of 0xffffffff, then the dump will restart from
0 (0xffffffff + 1) and never end:
# ip nexthop add id $((2**32-1)) blackhole
# ip nexthop
id 4294967295 blackhole
id 4294967295 blackhole
[...]
Fix by adjusting the dump callback to return zero when the dump is
complete. After the fix only one recvmsg() call is made and the
NLMSG_DONE message is appended to the RTM_NEWNEXTHOP response:
# ip nexthop add id $((2**32-1)) blackhole
# strace -e sendto,recvmsg -s 5 ip nexthop
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394080, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 56
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 4294967295], {nla_len=4, nla_type=NHA_BLACKHOLE}]], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 56
id 4294967295 blackhole
+++ exited with 0 +++
Note that if the NLMSG_DONE message cannot be appended because of size
limitations, then another recvmsg() will be needed, but the core netlink
code will not invoke the dump callback and simply reply with a
NLMSG_DONE message since it knows that the callback previously returned
zero.
Add a test that fails before the fix:
# ./fib_nexthops.sh -t basic
[...]
TEST: Maximum nexthop ID dump [FAIL]
[...]
And passes after it:
# ./fib_nexthops.sh -t basic
[...]
TEST: Maximum nexthop ID dump [ OK ]
[...]
Fixes: ab84be7e54fc ("net: Initial nexthop code")
Reported-by: Petr Machata <petrm@nvidia.com>
Closes: https://lore.kernel.org/netdev/87sf91enuf.fsf@nvidia.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230808075233.3337922-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
get-reg-list test is used to check for KVM registers regressions
during VM migration which happens when destination host kernel
missing registers that the source host kernel has. The blessed
list registers was created by running on v6.5-rc3
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add new skips_set members to vcpu_reg_sublist so as to skip
set operation on some registers.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Only do the get/set tests on present and blessed registers
since we don't know the capabilities of any new ones.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
No functional changes. Just move the finalize_vcpu call back to
run_test and do weak function trick to prepare for the opration
in riscv.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
No functional changes. Just move the reject_set check logic to a
function so we can check for a specific errno. This is a preparation
for support reject_set in riscv.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add some unfortunate #ifdeffery to ensure the common get-reg-list.c
can be compiled and run with other architectures. The next
architecture to support get-reg-list should now only need to provide
$(ARCH_DIR)/get-reg-list.c where arch-specific print_reg() and
vcpu_configs[] get defined.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Split the arch-neutral test code out of aarch64/get-reg-list.c into
get-reg-list.c. To do this we invent a new make variable
$(SPLIT_TESTS) which expects common parts to be in the KVM selftests
root and the counterparts to have the same name, but be in
$(ARCH_DIR).
There's still some work to be done to de-aarch64 the common
get-reg-list.c, but we leave that to the next patch to avoid
modifying too much code while moving it.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Update [1] to LLVM BPF backend seeks to enable generation of BPF_ST
instruction when CPUv4 is selected. This affects expected log messages
for the following selftests:
- log_fixup/missing_map
- spin_lock/lock_id_mapval_preserve
- spin_lock/lock_id_innermapval_preserve
Expected messages in these tests hard-code instruction numbers for BPF
programs compiled from C. These instruction numbers change when
BPF_ST is allowed because single BPF_ST instruction replaces a pair of
BPF_MOV/BPF_STX instructions, e.g.:
r1 = 42;
*(u32 *)(r10 - 8) = r1; ---> *(u32 *)(r10 - 8) = 42;
This commit updates expected log messages to avoid matching specific
instruction numbers (program position still could be uniquely
identified).
[1] https://reviews.llvm.org/D140804
"[BPF] support for BPF_ST instruction in codegen"
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230808162755.392606-1-eddyz87@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
The file cgroup_tcp_skb.c contains redundant implementations of the similar
functions (create_server_sock_v6(), connect_client_server_v6() and
get_sock_port_v6()) found in network_helpers.c. Let's eliminate these
duplicated functions.
Changes from v1:
- Remove get_sock_port_v6() as well.
v1: https://lore.kernel.org/all/20230807193840.567962-1-thinker.li@gmail.com/
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20230808162858.326871-1-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Use rseq_unqual_scalar_typeof() rather than typeof() in macros to remove
the volatile qualifier (if there is one in the input argument), thus
generating better assembly code in those scenarios.
Also add extra brackets around the "p" parameter in RSEQ_READ_ONCE(),
RSEQ_WRITE_ONCE(), and rseq_unqual_scalar_typeof() across architectures
to preserve expectations of operator priority. Here is an example that
shows how operator priority may be an issue with missing parentheses:
#define m(p) \
do { \
__typeof__(*p) v = 0; \
} while (0)
void fct(unsigned long long *p1)
{
m(p1 + 1); /* works */
m(1 + p1); /* broken */
}
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The arm64 load-acquire/store-release macros from the Linux kernel rseq
selftests are buggy. Remplace them by a working implementation.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Allow defining variables and perform cast with a typeof which removes
the volatile and const qualifiers.
This prevents declaring a stack variable with a volatile qualifier
within a macro, which would generate sub-optimal assembler.
This is imported from the "librseq" project.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Ensure that the basic percpu ops tests are effectively built against
mm_cid.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
core_reg_fixup() complicates sharing the get-reg-list test with
other architectures. Rather than work at keeping it, with plenty
of #ifdeffery, just delete it, as it's unlikely to test a kernel
based on anything older than v5.2 with the get-reg-list test,
which is a test meant to check for regressions in new kernels.
(And, an older version of the test can still be used for older
kernels if necessary.)
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Rename vcpu_config to vcpu_reg_list to be more specific and add
it to kvm_util.h. While it may not get used outside get-reg-list
tests, exporting it doesn't hurt, as long as it has a unique enough
name. This is a step in the direction of sharing most of the get-
reg-list test code between architectures.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
print_reg() and its helpers only use the vcpu_config pointer for
config_name(). So just pass the config name in instead, which is used
as a prefix in asserts. print_reg() can now be compiled independently
of config_name().
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The check doesn't prove much anyway, as the reg lists could be
messed up too. Just drop the check to simplify making print_reg
more independent.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The original author of aarch64/get-reg-list.c (me) was wearing
tunnel vision goggles when implementing str_with_index(). There's
no reason to have such a special case string function. Instead,
take inspiration from glib and implement strdup_printf. The
implementation builds on vasprintf() which requires _GNU_SOURCE,
but we require _GNU_SOURCE in most files already.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Adding get_func_ip test for uprobe inside function that validates
the get_func_ip helper returns correct probe address value.
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230807085956.2344866-4-jolsa@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Adding get_func_ip tests for uprobe on function entry that
validates that bpf_get_func_ip returns proper values from
both uprobe and return uprobe.
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230807085956.2344866-3-jolsa@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
A movsx selftest is added for sign-extension of frame pointer R10.
The verification fails for both privileged and unprivileged
prog runs.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230807175726.672394-1-yonghong.song@linux.dev
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"x86:
- Fix SEV race condition
ARM:
- Fixes for the configuration of SVE/SME traps when hVHE mode is in
use
- Allow use of pKVM on systems with FF-A implementations that are
v1.0 compatible
- Request/release percpu IRQs (arch timer, vGIC maintenance)
correctly when pKVM is in use
- Fix function prototype after __kvm_host_psci_cpu_entry() rename
- Skip to the next instruction when emulating writes to TCR_EL1 on
AmpereOne systems
Selftests:
- Fix missing include"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests/rseq: Fix build with undefined __weak
KVM: SEV: remove ghcb variable declarations
KVM: SEV: only access GHCB fields once
KVM: SEV: snapshot the GHCB before accessing it
KVM: arm64: Skip instruction after emulating write to TCR_EL1
KVM: arm64: fix __kvm_host_psci_cpu_entry() prototype
KVM: arm64: Fix resetting SME trap values on reset for (h)VHE
KVM: arm64: Fix resetting SVE trap values on reset for hVHE
KVM: arm64: Use the appropriate feature trap register when activating traps
KVM: arm64: Helper to write to appropriate feature trap register based on mode
KVM: arm64: Disable SME traps for (h)VHE at setup
KVM: arm64: Use the appropriate feature trap register for SVE at EL2 setup
KVM: arm64: Factor out code for checking (h)VHE mode into a macro
KVM: arm64: Rephrase percpu enable/disable tracking in terms of hyp
KVM: arm64: Fix hardware enable/disable flows for pKVM
KVM: arm64: Allow pKVM on v1.0 compatible FF-A implementations
|
