| Age | Commit message (Collapse) | Author |
|---|
|
Add a test to ensure that setting both generic and fixed performance
event filters does not affect the consistency of the fixed event filter
behavior in KVM.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Link: https://lore.kernel.org/r/20230810090945.16053-7-cloudliang@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add tests to cover that pmu event_filter works as expected when it's
applied to fixed performance counters, even if there is none fixed
counter exists (e.g. Intel guest pmu version=1 or AMD guest).
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Link: https://lore.kernel.org/r/20230810090945.16053-6-cloudliang@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add test cases to verify the handling of unsupported input values for the
PMU event filter. The tests cover unsupported "action" values, unsupported
"flags" values, and unsupported "nevents" values. All these cases should
return an error, as they are currently not supported by the filter.
Furthermore, the tests also cover the case where setting non-existent
fixed counters in the fixed bitmap does not fail.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Link: https://lore.kernel.org/r/20230810090945.16053-5-cloudliang@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add custom "__kvm_pmu_event_filter" structure to improve pmu event
filter settings. Simplifies event filter setup by organizing event
filter parameters in a cleaner, more organized way.
Alternatively, selftests could use a struct overlay ala vcpu_set_msr()
to avoid dynamically allocating the array:
struct {
struct kvm_msrs header;
struct kvm_msr_entry entry;
} buffer = {};
memset(&buffer, 0, sizeof(buffer));
buffer.header.nmsrs = 1;
buffer.entry.index = msr_index;
buffer.entry.data = msr_value;
but the extra layer added by the nested structs is counterproductive
to writing efficient, clean code.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Link: https://lore.kernel.org/r/20230810090945.16053-4-cloudliang@tencent.com
[sean: massage changelog to explain alternative]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
None of the callers consume remove_event(), and it incorrectly implies
that the incoming filter isn't modified. Drop the return.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Link: https://lore.kernel.org/r/20230810090945.16053-3-cloudliang@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add x86 properties for Intel PMU so that tests don't have to manually
retrieve the correct CPUID leaf+register, and so that the resulting code
is self-documenting.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Link: https://lore.kernel.org/r/20230810090945.16053-2-cloudliang@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-08-16
We've added 17 non-merge commits during the last 6 day(s) which contain
a total of 20 files changed, 1179 insertions(+), 37 deletions(-).
The main changes are:
1) Add a BPF hook in sys_socket() to change the protocol ID
from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
applications, from Geliang Tang.
2) Follow-up/fallout fix from the SO_REUSEPORT + bpf_sk_assign work
to fix a splat on non-fullsock sks in inet[6]_steal_sock,
from Lorenz Bauer.
3) Improvements to struct_ops links to avoid forcing presence of
update/validate callbacks. Also add bpf_struct_ops fields documentation,
from David Vernet.
4) Ensure libbpf sets close-on-exec flag on gzopen, from Marco Vedovati.
5) Several new tcx selftest additions and bpftool link show support for
tcx and xdp links, from Daniel Borkmann.
6) Fix a smatch warning on uninitialized symbol in
bpf_perf_link_fill_kprobe, from Yafang Shao.
7) BPF selftest fixes e.g. misplaced break in kfunc_call test,
from Yipeng Zou.
8) Small cleanup to remove unused declaration bpf_link_new_file,
from Yue Haibing.
9) Small typo fix to bpftool's perf help message, from Daniel T. Lee.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Add mptcpify test
selftests/bpf: Fix error checks of mptcp open_and_load
selftests/bpf: Add two mptcp netns helpers
bpf: Add update_socket_protocol hook
bpftool: Implement link show support for xdp
bpftool: Implement link show support for tcx
selftests/bpf: Add selftest for fill_link_info
bpf: Fix uninitialized symbol in bpf_perf_link_fill_kprobe()
net: Fix slab-out-of-bounds in inet[6]_steal_sock
bpf: Document struct bpf_struct_ops fields
bpf: Support default .validate() and .update() behavior for struct_ops links
selftests/bpf: Add various more tcx test cases
selftests/bpf: Clean up fmod_ret in bench_rename test script
selftests/bpf: Fix repeat option when kfunc_call verification fails
libbpf: Set close-on-exec flag on gzopen
bpftool: fix perf help message
bpf: Remove unused declaration bpf_link_new_file()
====================
Link: https://lore.kernel.org/r/20230816212840.1539-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'rcu-tasks.2023.07.24a', 'rcuscale.2023.07.14b', 'refscale.2023.07.14b', 'torture.2023.08.14a' and 'torturescripts.2023.07.20a' into HEAD
doc.2023.07.14b: Documentation updates.
fixes.2023.08.16a: Miscellaneous fixes.
rcu-tasks.2023.07.24a: RCU Tasks updates.
rcuscale.2023.07.14b: RCU (updater) scalability test updates.
refscale.2023.07.14b: Reference (reader) scalability test updates.
torture.2023.08.14a: Other torture-test updates.
torturescripts.2023.07.20a: Other torture-test scripting updates.
|
|
This testcase is constrived to reproduce a problem that the cpu buffers
become unavailable which is due to 'record_disabled' of array_buffer and
max_buffer being messed up.
Local test result after bugfix:
# ./ftracetest test.d/00basic/snapshot1.tc
=== Ftrace unit tests ===
[1] Snapshot and tracing_cpumask [PASS]
[2] (instance) Snapshot and tracing_cpumask [PASS]
# of passed: 2
# of failed: 0
# of unresolved: 0
# of untested: 0
# of unsupported: 0
# of xfailed: 0
# of undefined(test bug): 0
Link: https://lkml.kernel.org/r/20230805033816.3284594-3-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <vnagarnaik@google.com>
Cc: <shuah@kernel.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Implement a new test program mptcpify: if the family is AF_INET or
AF_INET6, the type is SOCK_STREAM, and the protocol ID is 0 or
IPPROTO_TCP, set it to IPPROTO_MPTCP. It will be hooked in
update_socket_protocol().
Extend the MPTCP test base, add a selftest test_mptcpify() for the
mptcpify case. Open and load the mptcpify test prog to mptcpify the
TCP sockets dynamically, then use start_server() and connect_to_fd()
to create a TCP socket, but actually what's created is an MPTCP
socket, which can be verified through 'getsockopt(SOL_PROTOCOL)'
and 'getsockopt(MPTCP_INFO)'.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/364e72f307e7bb38382ec7442c182d76298a9c41.1692147782.git.geliang.tang@suse.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Return libbpf_get_error(), instead of -EIO, for the error from
mptcp_sock__open_and_load().
Load success means prog_fd and map_fd are always valid. So drop these
unneeded ASSERT_GE checks for them in mptcp run_test().
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/db5fcb93293df9ab173edcbaf8252465b80da6f2.1692147782.git.geliang.tang@suse.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add two netns helpers for mptcp tests: create_netns() and
cleanup_netns(). Use them in test_base().
These new helpers will be re-used in the following commits
introducing new tests.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/7506371fb6c417b401cc9d7365fe455754f4ba3f.1692147782.git.geliang.tang@suse.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
At the moment the cachestat syscall number is hard coded into the test
source code.
Remove that and replace it with the proper __NR_cachestat macro.
That ensures compatibility should other architectures pick a different
number.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Libraries should be listed last on the compiler's command line, so that
the linker can look for and find still unresolved symbols. The librt
library, required for the shm_* functions, was announced using CFLAGS,
which puts the library *before* the source files, and fails compilation
on my system:
======================
gcc -isystem /src/linux-selftests/usr/include -Wall -lrt test_cachestat.c
-o /src/linux-selftests/kselftest/cachestat/test_cachestat
/usr/bin/ld: /tmp/cceQWO3u.o: in function `test_cachestat_shmem':
test_cachestat.c:(.text+0x890): undefined reference to `shm_open'
/usr/bin/ld: test_cachestat.c:(.text+0x99c): undefined reference to `shm_unlink'
collect2: error: ld returned 1 exit status
make[4]: *** [../lib.mk:181: /src/linux-selftests/kselftest/cachestat/test_cachestat] Error 1
======================
Announce the library using the LDLIBS variable, which ensures the proper
ordering on the command line.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Observed occassional failures in the futex_wait_timeout test:
ok 1 futex_wait relative succeeds
ok 2 futex_wait_bitset realtime succeeds
ok 3 futex_wait_bitset monotonic succeeds
ok 4 futex_wait_requeue_pi realtime succeeds
ok 5 futex_wait_requeue_pi monotonic succeeds
not ok 6 futex_lock_pi realtime returned 0
......
The test expects the child thread to complete some steps before
the parent thread gets to run. There is an implicit expectation
of the order of invocation of futex_lock_pi between the child thread
and the parent thread. Make this order explicit. If the order is
not met, the futex_lock_pi call in the parent thread succeeds and
will not timeout.
Fixes: f4addd54b161 ("selftests: futex: Expand timeout test")
Signed-off-by: Nysal Jan K.A <nysal@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
We have some dmabuf-heaps and perf_events tests but they are not hooked
up to the kselftest build infrastructure which is a bit of an obstacle
to running them in systems with generic infrastructure for selftests.
Add them to the top level kselftest Makefile so they get built as
standard.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The user_events selftests were removed from the standard set of
selftests due to the uapi header it relies on having been temporarily
removed. That header is now reinstated so we can reenable the tests.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
In busybox, the mktemp requires that the generated filename be
suffixed with at least six consecutive 'X' characters. Otherwise,
it will return an "Invalid argument" error.
Signed-off-by: Hui Min Mina Chou <minachou@andestech.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add selftest for the fill_link_info of uprobe, kprobe and tracepoint.
The result:
$ tools/testing/selftests/bpf/test_progs --name=fill_link_info
#79/1 fill_link_info/kprobe_link_info:OK
#79/2 fill_link_info/kretprobe_link_info:OK
#79/3 fill_link_info/kprobe_invalid_ubuff:OK
#79/4 fill_link_info/tracepoint_link_info:OK
#79/5 fill_link_info/uprobe_link_info:OK
#79/6 fill_link_info/uretprobe_link_info:OK
#79/7 fill_link_info/kprobe_multi_link_info:OK
#79/8 fill_link_info/kretprobe_multi_link_info:OK
#79/9 fill_link_info/kprobe_multi_invalid_ubuff:OK
#79 fill_link_info:OK
Summary: 1/9 PASSED, 0 SKIPPED, 0 FAILED
The test case for kprobe_multi won't be run on aarch64, as it is not
supported.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230813141900.1268-3-laoar.shao@gmail.com
|
|
Add the jscvt feature check in the set of hwcap tests.
Due to the requirement of jscvt feature, a compiler configuration
of v8.3 or above is needed to support assembly. Therefore, hand
encode is used here instead.
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230815040915.3966955-5-zengheng4@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the pmull feature check in the set of hwcap tests.
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230815040915.3966955-4-zengheng4@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the AES feature check in the set of hwcap tests.
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230815040915.3966955-3-zengheng4@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the SHA1 and related features check in the set of hwcap tests.
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230815040915.3966955-2-zengheng4@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Now that ptrace and perf are no longer exclusive, update the
test to exercise interesting interactions.
An assembly file is used for the children to allow precise instruction
choice and addresses, while avoiding any compiler quirks.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801011744.153973-7-bgray@linux.ibm.com
|
|
Commit ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost")
deprecated <asm/export.h>, which is now a wrapper of <linux/export.h>.
Replace #include <asm/export.h> with #include <linux/export.h>.
After all the <asm/export.h> lines are converted, <asm/export.h> and
<asm-generic/export.h> will be removed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[mpe: Fixup selftests that stub asm/export.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230806150954.394189-2-masahiroy@kernel.org
|
|
The arm64 BTI selftests are currently built in the source directory,
then the generated binaries are copied to the output directory.
This leaves the object files around in a potentially otherwise pristine
source tree, tainting it for out-of-tree kernel builds.
Prepend $(OUTPUT) to every reference to an object file in the Makefile,
and remove the extra handling and copying. This puts all generated files
under the output directory.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230815145931.2522557-1-andre.przywara@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If memcmp() does not return 0, "zeros" need to be freed to prevent memleak
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20230815074915.245528-1-dingxiang@cmss.chinamobile.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add 1000 IPv6 routes with expiration time (w/ and w/o additional 5000
permanet routes in the background.) Wait for a few seconds to make sure
they are removed correctly.
The expected output of the test looks like the following example.
> Fib6 garbage collection test
> TEST: ipv6 route garbage collection [ OK ]
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When run command "ip netns delete client", device link1_1 has been
deleted. So, it is no need to delete link1_1 again. Remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This selftest is designed for testing the support of NEXT-C-SID flavor
for SRv6 End.X behavior. It instantiates a virtual network composed of
several nodes: hosts and SRv6 routers. Each node is realized using a
network namespace that is properly interconnected to others through veth
pairs, according to the topology depicted in the selftest script file.
The test considers SRv6 routers implementing IPv4/IPv6 L3 VPNs leveraged
by hosts for communicating with each other. Such routers i) apply
different SRv6 Policies to the traffic received from connected hosts,
considering the IPv4 or IPv6 protocols; ii) use the NEXT-C-SID
compression mechanism for encoding several SRv6 segments within a single
128-bit SID address, referred to as a Compressed SID (C-SID) container.
The NEXT-C-SID is provided as a "flavor" of the SRv6 End.X behavior,
enabling it to properly process the C-SID containers. The correct
execution of the enabled NEXT-C-SID SRv6 End.X behavior is verified
through reachability tests carried out between hosts belonging to the
same VPN.
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@uniroma2.it>
Co-developed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230812180926.16689-3-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Required for following patches.
Resolve merge conflict by using the hunk from the for-next branch and
shifting the iommufd_object_deref_user() into iommufd_hw_pagetable_put()
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add several new tcx test cases to improve test coverage. This also includes
a few new tests with ingress instead of clsact qdisc, to cover the fix from
commit dc644b540a2d ("tcx: Fix splat in ingress_destroy upon tcx_entry_free").
# ./test_progs -t tc
[...]
#234 tc_links_after:OK
#235 tc_links_append:OK
#236 tc_links_basic:OK
#237 tc_links_before:OK
#238 tc_links_chain_classic:OK
#239 tc_links_chain_mixed:OK
#240 tc_links_dev_cleanup:OK
#241 tc_links_dev_mixed:OK
#242 tc_links_ingress:OK
#243 tc_links_invalid:OK
#244 tc_links_prepend:OK
#245 tc_links_replace:OK
#246 tc_links_revision:OK
#247 tc_opts_after:OK
#248 tc_opts_append:OK
#249 tc_opts_basic:OK
#250 tc_opts_before:OK
#251 tc_opts_chain_classic:OK
#252 tc_opts_chain_mixed:OK
#253 tc_opts_delete_empty:OK
#254 tc_opts_demixed:OK
#255 tc_opts_detach:OK
#256 tc_opts_detach_after:OK
#257 tc_opts_detach_before:OK
#258 tc_opts_dev_cleanup:OK
#259 tc_opts_invalid:OK
#260 tc_opts_mixed:OK
#261 tc_opts_prepend:OK
#262 tc_opts_replace:OK
#263 tc_opts_revision:OK
[...]
Summary: 44/38 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/8699efc284b75ccdc51ddf7062fa2370330dc6c0.1692029283.git.daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Running the bench_rename test script, the following error occurs:
# ./benchs/run_bench_rename.sh
base : 0.819 ± 0.012M/s
kprobe : 0.538 ± 0.009M/s
kretprobe : 0.503 ± 0.004M/s
rawtp : 0.779 ± 0.020M/s
fentry : 0.726 ± 0.007M/s
fexit : 0.691 ± 0.007M/s
benchmark 'rename-fmodret' not found
The bench_rename_fmodret has been removed in commit b000def2e052
("selftests: Remove fmod_ret from test_overhead"), thus remove it
from the runners in the test script.
Fixes: b000def2e052 ("selftests: Remove fmod_ret from test_overhead")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230814030727.3010390-1-zouyipeng@huawei.com
|
|
There is no way where topts.repeat can be set to 1 when tc_test fails.
Fix the typo where the break statement slipped by one line.
Fixes: fb66223a244f ("selftests/bpf: add test for accessing ctx from syscall program type")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/bpf/20230814031434.3077944-1-zouyipeng@huawei.com
|
|
This test verifies whether the encapsulated packets have the correct
configured TTL. It does so by sending ICMP packets through the test
topology and mirroring them to a gretap netdevice. On a busy host
however, more than just the test ICMP packets may end up flowing
through the topology, get mirrored, and counted. This leads to
potential spurious failures as the test observes much more mirrored
packets than the sent test packets, and assumes a bug.
Fix this by tightening up the mirror action match. Change it from
matchall to a flower classifier matching on ICMP packets specifically.
Fixes: 45315673e0c5 ("selftests: forwarding: Test changes in mirror-to-gretap")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check that traffic can be redirected from a locked bridge port and that
it does not create locked FDB entries.
Cc: Hans J. Schultz <netdev@kapio-technology.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test explicit drops generate the right drop reason. Also, verify that
the kernel rejects flows with actions following an explicit drop.
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test if the correct drop reason is reported when OVS drops a packet due
to an explicit flow.
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
From: Eric Garver <eric@garver.life>
This adds an explicit drop action. This is used by OVS to drop packets
for which it cannot determine what to do. An explicit action in the
kernel allows passing the reason _why_ the packet is being dropped or
zero to indicate no particular error happened (i.e: OVS intentionally
dropped the packet).
Since the error codes coming from userspace mean nothing for the kernel,
we squash all of them into only two drop reasons:
- OVS_DROP_EXPLICIT_WITH_ERROR to indicate a non-zero value was passed
- OVS_DROP_EXPLICIT to indicate a zero value was passed (no error)
e.g. trace all OVS dropped skbs
# perf trace -e skb:kfree_skb --filter="reason >= 0x30000"
[..]
106.023 ping/2465 skb:kfree_skb(skbaddr: 0xffffa0e8765f2000, \
location:0xffffffffc0d9b462, protocol: 2048, reason: 196611)
reason: 196611 --> 0x30003 (OVS_DROP_EXPLICIT)
Also, this patch allows ovs-dpctl.py to add explicit drop actions as:
"drop" -> implicit empty-action drop
"drop(0)" -> explicit non-error action drop
"drop(42)" -> explicit error action drop
Signed-off-by: Eric Garver <eric@garver.life>
Co-developed-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"14 hotfixes. 11 of these are cc:stable and the remainder address
post-6.4 issues, or are not considered suitable for -stable
backporting"
* tag 'mm-hotfixes-stable-2023-08-11-13-44' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/damon/core: initialize damo_filter->list from damos_new_filter()
nilfs2: fix use-after-free of nilfs_root in dirtying inodes via iput
selftests: cgroup: fix test_kmem_basic false positives
fs/proc/kcore: reinstate bounce buffer for KCORE_TEXT regions
MAINTAINERS: add maple tree mailing list
mm: compaction: fix endless looping over same migrate block
selftests: mm: ksm: fix incorrect evaluation of parameter
hugetlb: do not clear hugetlb dtor until allocating vmemmap
mm: memory-failure: avoid false hwpoison page mapped error info
mm: memory-failure: fix potential unexpected return value from unpoison_memory()
mm/swapfile: fix wrong swap entry type for hwpoisoned swapcache page
radix tree test suite: fix incorrect allocation size for pthreads
crypto, cifs: fix error handling in extract_iter_to_sg()
zsmalloc: fix races between modifications of fullness and isolated
|
|
Our ABI opts to provide future proofing by defining a much larger
SVE_VQ_MAX than the architecture actually supports. Since we use
this define to control the size of our vector data buffers this results
in a lot of overhead when we initialise which can be a very noticable
problem in emulation, we fill buffers that are orders of magnitude
larger than we will ever actually use even with virtual platforms that
provide the full range of architecturally supported vector lengths.
Define and use the actual architecture maximum to mitigate this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230810-arm64-syscall-abi-perf-v1-1-6a0d7656359c@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the LSE and various features check in the set of hwcap tests.
As stated in the ARM manual, the LSE2 feature allows for atomic access
to unaligned memory. Therefore, for processors that only have the LSE
feature, we register .sigbus_fn to test their ability to perform
unaligned access.
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230808134036.668954-6-zengheng4@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Some enhanced features, such as the LSE2 feature, do not result in
SILLILL if LSE2 is missing and LSE is present, but will generate a
SIGBUS exception when atomic access unaligned.
Therefore, we add test item to test this type of features.
Notice that testing for SIGBUS only makes sense after make sure that
the instruction does not cause a SIGILL signal.
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230808134036.668954-5-zengheng4@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add macro definition functions DEF_SIGHANDLER_FUNC() and
DEF_INST_RAISE_SIG() helpers.
Furthermore, there is no need to modify the default SIGILL handling
function throughout the entire testing lifecycle in the main() function.
It is reasonable to narrow the scope to the context of the sig_fn
function only.
This is a pre-patch for the subsequent SIGBUS handler patch.
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230808134036.668954-4-zengheng4@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the CRC32 feature check in the set of hwcap tests.
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230808134036.668954-3-zengheng4@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the FP feature check in the set of hwcap tests.
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230808134036.668954-2-zengheng4@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Tests that were expecting a signal were not correctly checking for a
SKIP condition. Move the check before the signal checking when
processing test result.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: linux-kselftest@vger.kernel.org
Fixes: 9847d24af95c ("selftests/harness: Refactor XFAIL into SKIP")
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2023-08-09
We've added 19 non-merge commits during the last 6 day(s) which contain
a total of 25 files changed, 369 insertions(+), 141 deletions(-).
The main changes are:
1) Fix array-index-out-of-bounds access when detaching from an
already empty mprog entry from Daniel Borkmann.
2) Adjust bpf selftest because of a recent llvm change
related to the cpu-v4 ISA from Eduard Zingerman.
3) Add uprobe support for the bpf_get_func_ip helper from Jiri Olsa.
4) Fix a KASAN splat due to the kernel incorrectly accepted
an invalid program using the recent cpu-v4 instruction from
Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
bpf: btf: Remove two unused function declarations
bpf: lru: Remove unused declaration bpf_lru_promote()
selftests/bpf: relax expected log messages to allow emitting BPF_ST
selftests/bpf: remove duplicated functions
bpf, docs: Fix small typo and define semantics of sign extension
selftests/bpf: Add bpf_get_func_ip test for uprobe inside function
selftests/bpf: Add bpf_get_func_ip tests for uprobe on function entry
bpf: Add support for bpf_get_func_ip helper for uprobe program
selftests/bpf: Add a movsx selftest for sign-extension of R10
bpf: Fix an incorrect verification success with movsx insn
bpf, docs: Formalize type notation and function semantics in ISA standard
bpf: change bpf_alu_sign_string and bpf_movsx_string to static
libbpf: Use local includes inside the library
bpf: fix bpf_dynptr_slice() to stop return an ERR_PTR.
bpf: fix inconsistent return types of bpf_xdp_copy_buf().
selftests/bpf: fix the incorrect verification of port numbers.
selftests/bpf: Add test for detachment on empty mprog entry
bpf: Fix mprog detachment for empty mprog entry
bpf: bpf_struct_ops: Remove unnecessary initial values of variables
====================
Link: https://lore.kernel.org/r/20230810055123.109578-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/intel/igc/igc_main.c
06b412589eef ("igc: Add lock to safeguard global Qbv variables")
d3750076d464 ("igc: Add TransmissionOverrun counter")
drivers/net/ethernet/microsoft/mana/mana_en.c
a7dfeda6fdec ("net: mana: Fix MANA VF unload when hardware is unresponsive")
a9ca9f9ceff3 ("page_pool: split types and declarations from page_pool.h")
92272ec4107e ("eth: add missing xdp.h includes in drivers")
net/mptcp/protocol.h
511b90e39250 ("mptcp: fix disconnect vs accept race")
b8dc6d6ce931 ("mptcp: fix rcv buffer auto-tuning")
tools/testing/selftests/net/mptcp/mptcp_join.sh
c8c101ae390a ("selftests: mptcp: join: fix 'implicit EP' test")
03668c65d153 ("selftests: mptcp: join: rework detailed report")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It turns out arm32 doesn't handle syscall -1 gracefully, so skip testing
for that. Additionally skip tests that depend on clone3 when it is not
available (for example when building the seccomp selftests on an old arm
image without clone3 headers). And improve error reporting for when
nanosleep fails, as seen on arm32 since v5.15.
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
