summaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)Author
2025-01-19selftests/efivarfs: add check for disallowing file truncationJames Bottomley
Now that the ability of arbitrary writes to set the inode size is fixed, verify that a variable file accepts a truncation operation but does not change the stat size because of it. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2025-01-18Merge patch series "riscv: Add support for xtheadvector"Palmer Dabbelt
Charlie Jenkins <charlie@rivosinc.com> says: xtheadvector is a custom extension that is based upon riscv vector version 0.7.1 [1]. All of the vector routines have been modified to support this alternative vector version based upon whether xtheadvector was determined to be supported at boot. vlenb is not supported on the existing xtheadvector hardware, so a devicetree property thead,vlenb is added to provide the vlenb to Linux. There is a new hwprobe key RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0 that is used to request which thead vendor extensions are supported on the current platform. This allows future vendors to allocate hwprobe keys for their vendor. Support for xtheadvector is also added to the vector kselftests. [1] https://github.com/T-head-Semi/thead-extension-spec/blob/95358cb2cca9489361c61d335e03d3134b14133f/xtheadvector.adoc * b4-shazam-merge: riscv: Add ghostwrite vulnerability selftests: riscv: Support xtheadvector in vector tests selftests: riscv: Fix vector tests riscv: hwprobe: Document thead vendor extensions and xtheadvector extension riscv: hwprobe: Add thead vendor extension probing riscv: vector: Support xtheadvector save/restore riscv: Add xtheadvector instruction definitions riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT RISC-V: define the elements of the VCSR vector CSR riscv: vector: Use vlenb from DT for thead riscv: Add thead and xtheadvector as a vendor extension riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree dt-bindings: cpus: add a thead vlen register length property dt-bindings: riscv: Add xtheadvector ISA extension description Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-0-236c22791ef9@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2025-01-18selftests: riscv: Support xtheadvector in vector testsCharlie Jenkins
Extend existing vector tests to be compatible with the xtheadvector instructions. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Tested-by: Yangyu Chen <cyy@cyyself.name> Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-13-236c22791ef9@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2025-01-18selftests: riscv: Fix vector testsCharlie Jenkins
Overhaul the riscv vector tests to use kselftest_harness to help the test cases correctly report the results and decouple the individual test cases from each other. With this refactoring, only run the test cases if vector is reported and properly report the test case as skipped otherwise. The v_initval_nolibc test was previously not checking if vector was supported and used a function (malloc) which invalidates the state of the vector registers. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Tested-by: Yangyu Chen <cyy@cyyself.name> Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-12-236c22791ef9@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2025-01-17selftests: net: give up on the cmsg_time accuracy on slow machinesJakub Kicinski
Commit b9d5f5711dd8 ("selftests: net: increase the delay for relative cmsg_time.sh test") widened the accepted value range 8x but we still see flakes (at a rate of around 7%). Return XFAIL for the most timing sensitive test on slow machines. Before: # ./cmsg_time.sh Case UDPv4 - TXTIME rel returned '8074us - 7397us < 4000', expected 'OK' FAIL - 1/36 cases failed After: # ./cmsg_time.sh Case UDPv4 - TXTIME rel returned '1123us - 941us < 500', expected 'OK' (XFAIL) Case UDPv6 - TXTIME rel returned '1227us - 776us < 500', expected 'OK' (XFAIL) OK Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250116020105.931338-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17dcache: back inline names with a struct-wrapped array of unsigned longAl Viro
... so that they can be copied with struct assignment (which generates better code) and accessed word-by-word. The type is union shortname_storage; it's a union of arrays of unsigned char and unsigned long. struct name_snapshot.inline_name turned into union shortname_storage; users (all in fs/dcache.c) adjusted. struct dentry.d_iname has some users outside of fs/dcache.c; to reduce the amount of noise in commit, it is replaced with union shortname_storage d_shortname and d_iname is turned into a macro that expands to d_shortname.string (similar to d_lock handling). That compat macro is temporary - most of the remaining instances will be taken out by debugfs series, and once that is merged and few others are taken care of this will go away. Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2025-01-17selftests/landlock: Add layout1.umount_sandboxer testsMickaël Salaün
Check that a domain is not tied to the executable file that created it. For instance, that could happen if a Landlock domain took a reference to a struct path. Move global path names to common.h and replace copy_binary() with a more generic copy_file() helper. Test coverage for security/landlock is 92.7% of 1133 lines according to gcc/gcov-14. Cc: Günther Noack <gnoack@google.com> Link: https://lore.kernel.org/r/20250108154338.1129069-23-mic@digikod.net [mic: Update date and add test coverage] Signed-off-by: Mickaël Salaün <mic@digikod.net>
2025-01-17selftests/landlock: Add wrappers.hMickaël Salaün
Extract syscall wrappers to make them usable by standalone binaries (see next commit). Cc: Günther Noack <gnoack@google.com> Link: https://lore.kernel.org/r/20250108154338.1129069-22-mic@digikod.net [mic: Fix comments] Signed-off-by: Mickaël Salaün <mic@digikod.net>
2025-01-17selftests/landlock: Fix error messageMickaël Salaün
The global variable errno may not be set in test_execute(). Do not use it in related error message. Cc: Günther Noack <gnoack@google.com> Fixes: e1199815b47b ("selftests/landlock: Add user space tests") Link: https://lore.kernel.org/r/20250108154338.1129069-21-mic@digikod.net Signed-off-by: Mickaël Salaün <mic@digikod.net>
2025-01-17selftests/landlock: Add test to check partial access in a mount treeMickaël Salaün
Add layout1.refer_part_mount_tree_is_allowed to test the masked logical issue regarding collect_domain_accesses() calls followed by the is_access_to_paths_allowed() check in current_check_refer_path(). See previous commit. This test should work without the previous fix as well, but it enables us to make sure future changes will not have impact regarding this behavior. Cc: Günther Noack <gnoack@google.com> Link: https://lore.kernel.org/r/20250108154338.1129069-13-mic@digikod.net Signed-off-by: Mickaël Salaün <mic@digikod.net>
2025-01-17selftests/landlock: Fix build with non-default pthread linkingMickaël Salaün
Old toolchains require explicit -lpthread (e.g. on Debian 11). Cc: Nathan Chancellor <nathan@kernel.org> Cc: Tahera Fahimi <fahimitahera@gmail.com> Fixes: c8994965013e ("selftests/landlock: Test signal scoping for threads") Reviewed-by: Günther Noack <gnoack3000@gmail.com> Link: https://lore.kernel.org/r/20250115145409.312226-1-mic@digikod.net Signed-off-by: Mickaël Salaün <mic@digikod.net>
2025-01-17Merge branch kvm-arm64/coresight-6.14 into kvmarm-master/nextMarc Zyngier
* kvm-arm64/coresight-6.14: : . : Trace filtering update from James Clark. From the cover letter: : : "The guest filtering rules from the Perf session are now honored for both : nVHE and VHE modes. This is done by either writing to TRFCR_EL12 at the : start of the Perf session and doing nothing else further, or caching the : guest value and writing it at guest switch for nVHE. In pKVM, trace is : now be disabled for both protected and unprotected guests." : . KVM: arm64: Fix selftests after sysreg field name update coresight: Pass guest TRFCR value to KVM KVM: arm64: Support trace filtering for guests KVM: arm64: coresight: Give TRBE enabled state to KVM coresight: trbe: Remove redundant disable call arm64/sysreg/tools: Move TRFCR definitions to sysreg tools: arm64: Update sysreg.h header files Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-01-16bpf: selftests: verifier: Add nullness elision testsDaniel Xu
Test that nullness elision works for common use cases. For example, we want to check that both constant scalar spills and STACK_ZERO functions. As well as when there's both const and non-const values of R2 leading up to a lookup. And obviously some bound checks. Particularly tricky are spills both smaller or larger than key size. For smaller, we need to ensure verifier doesn't let through a potential read into unchecked bytes. For larger, endianness comes into play, as the native endian value tracked in the verifier may not be the bytes the kernel would have read out of the key pointer. So check that we disallow both. Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Link: https://lore.kernel.org/r/f1dacaa777d4516a5476162e0ea549f7c3354d73.1736886479.git.dxu@dxuuu.xyz Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-01-16bpf: verifier: Support eliding map lookup nullnessDaniel Xu
This commit allows progs to elide a null check on statically known map lookup keys. In other words, if the verifier can statically prove that the lookup will be in-bounds, allow the prog to drop the null check. This is useful for two reasons: 1. Large numbers of nullness checks (especially when they cannot fail) unnecessarily pushes prog towards BPF_COMPLEXITY_LIMIT_JMP_SEQ. 2. It forms a tighter contract between programmer and verifier. For (1), bpftrace is starting to make heavier use of percpu scratch maps. As a result, for user scripts with large number of unrolled loops, we are starting to hit jump complexity verification errors. These percpu lookups cannot fail anyways, as we only use static key values. Eliding nullness probably results in less work for verifier as well. For (2), percpu scratch maps are often used as a larger stack, as the currrent stack is limited to 512 bytes. In these situations, it is desirable for the programmer to express: "this lookup should never fail, and if it does, it means I messed up the code". By omitting the null check, the programmer can "ask" the verifier to double check the logic. Tests also have to be updated in sync with these changes, as the verifier is more efficient with this change. Notable, iters.c tests had to be changed to use a map type that still requires null checks, as it's exercising verifier tracking logic w.r.t iterators. Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Link: https://lore.kernel.org/r/68f3ea96ff3809a87e502a11a4bd30177fc5823e.1736886479.git.dxu@dxuuu.xyz Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-01-16bpf: verifier: Refactor helper access type trackingDaniel Xu
Previously, the verifier was treating all PTR_TO_STACK registers passed to a helper call as potentially written to by the helper. However, all calls to check_stack_range_initialized() already have precise access type information available. Rather than treat ACCESS_HELPER as a proxy for BPF_WRITE, pass enum bpf_access_type to check_stack_range_initialized() to more precisely track helper arguments. One benefit from this precision is that registers tracked as valid spills and passed as a read-only helper argument remain tracked after the call. Rather than being marked STACK_MISC afterwards. An additional benefit is the verifier logs are also more precise. For this particular error, users will enjoy a slightly clearer message. See included selftest updates for examples. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Link: https://lore.kernel.org/r/ff885c0e5859e0cd12077c3148ff0754cad4f7ed.1736886479.git.dxu@dxuuu.xyz Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-01-16selftests/net: packetdrill: make tcp buf limited timing tests benignJakub Kicinski
The following tests are failing on debug kernels: tcp_tcp_info_tcp-info-rwnd-limited.pkt tcp_tcp_info_tcp-info-sndbuf-limited.pkt with reports like: assert 19000 <= tcpi_sndbuf_limited <= 21000, tcpi_sndbuf_limited; \ AssertionError: 18000 and: assert 348000 <= tcpi_busy_time <= 360000, tcpi_busy_time AssertionError: 362000 Extend commit 912d6f669725 ("selftests/net: packetdrill: report benign debug flakes as xfail") to cover them. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250115232129.845884-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16selftests: drv-net-hw: inject pp_alloc_fail errors in the right placeJohn Daley
The tool pp_alloc_fail.py tested error recovery by injecting errors into the function page_pool_alloc_pages(). The page pool allocation function page_pool_dev_alloc() does not end up calling page_pool_alloc_pages(). page_pool_alloc_netmems() seems to be the function that is called by all of the page pool alloc functions in the API, so move error injection to that function instead. Signed-off-by: John Daley <johndale@cisco.com> Link: https://patch.msgid.link/20250115181312.3544-2-johndale@cisco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16selftests/bpf: Add distilled BTF test about marking BTF_IS_EMBEDDEDPu Lehui
When redirecting the split BTF to the vmlinux base BTF, we need to mark the distilled base struct/union members of split BTF structs/unions in id_map with BTF_IS_EMBEDDED. This indicates that these types must match both name and size later. So if a needed composite type, which is the member of composite type in the split BTF, has a different size in the base BTF we wish to relocate with, btf__relocate() should error out. Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250115100241.4171581-4-pulehui@huaweicloud.com
2025-01-16selftests/bpf: Fix btf leak on new btf alloc failure in btf_distill testPu Lehui
Fix btf leak on new btf alloc failure in btf_distill test. Fixes: affdeb50616b ("selftests/bpf: Extend distilled BTF tests to cover BTF relocation") Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250115100241.4171581-1-pulehui@huaweicloud.com
2025-01-16veristat: Load struct_ops programs only onceEduard Zingerman
libbpf automatically adjusts autoload for struct_ops programs, see libbpf.c:bpf_object_adjust_struct_ops_autoload. For example, if there is a map: SEC(".struct_ops.link") struct sched_ext_ops ops = { .enqueue = foo, .tick = bar, }; Both 'foo' and 'bar' would be loaded if 'ops' autocreate is true, both 'foo' and 'bar' would be skipped if 'ops' autocreate is false. This means that when veristat processes object file with 'ops', it would load 4 programs in total: two programs per each 'process_prog' call. The adjustment occurs at object load time, and libbpf remembers association between 'ops' and 'foo'/'bar' at object open time. The only way to persuade libbpf to load one of two is to adjust map initial value, such that only one program is referenced. This patch does exactly that, significantly reducing time to process object files with big number of struct_ops programs. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250115223835.919989-1-eddyz87@gmail.com
2025-01-16selftests/bpf: Fix undefined UINT_MAX in veristat.cTony Ambardar
Include <limits.h> in 'veristat.c' to provide a UINT_MAX definition and avoid multiple compile errors against mips64el/musl-libc: veristat.c: In function 'max_verifier_log_size': veristat.c:1135:36: error: 'UINT_MAX' undeclared (first use in this function) 1135 | const int SMALL_LOG_SIZE = UINT_MAX >> 8; | ^~~~~~~~ veristat.c:24:1: note: 'UINT_MAX' is defined in header '<limits.h>'; did you forget to '#include <limits.h>'? 23 | #include <math.h> +++ |+#include <limits.h> 24 | Fixes: 1f7c33630724 ("selftests/bpf: Increase verifier log limit in veristat") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250116075036.3459898-1-tony.ambardar@gmail.com
2025-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc8). Conflicts: drivers/net/ethernet/realtek/r8169_main.c 1f691a1fc4be ("r8169: remove redundant hwmon support") 152d00a91396 ("r8169: simplify setting hwmon attribute visibility") https://lore.kernel.org/20250115122152.760b4e8d@canb.auug.org.au Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.c 152f4da05aee ("bnxt_en: add support for rx-copybreak ethtool command") f0aa6a37a3db ("eth: bnxt: always recalculate features after XDP clearing, fix null-deref") drivers/net/ethernet/intel/ice/ice_type.h 50327223a8bb ("ice: add lock to protect low latency interface") dc26548d729e ("ice: Fix quad registers read on E825") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16Merge tag 'net-6.13-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Notably this includes fixes for a few regressions spotted very recently. No known outstanding ones. Current release - regressions: - core: avoid CFI problems with sock priv helpers - xsk: bring back busy polling support - netpoll: ensure skb_pool list is always initialized Current release - new code bugs: - core: make page_pool_ref_netmem work with net iovs - ipv4: route: fix drop reason being overridden in ip_route_input_slow - udp: make rehash4 independent in udp_lib_rehash() Previous releases - regressions: - bpf: fix bpf_sk_select_reuseport() memory leak - openvswitch: fix lockup on tx to unregistering netdev with carrier - mptcp: be sure to send ack when mptcp-level window re-opens - eth: - bnxt: always recalculate features after XDP clearing, fix null-deref - mlx5: fix sub-function add port error handling - fec: handle page_pool_dev_alloc_pages error Previous releases - always broken: - vsock: some fixes due to transport de-assignment - eth: - ice: fix E825 initialization - mlx5e: fix inversion dependency warning while enabling IPsec tunnel - gtp: destroy device along with udp socket's netns dismantle. - xilinx: axienet: Fix IRQ coalescing packet count overflow" * tag 'net-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits) netdev: avoid CFI problems with sock priv helpers net/mlx5e: Always start IPsec sequence number from 1 net/mlx5e: Rely on reqid in IPsec tunnel mode net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnel net/mlx5: Clear port select structure when fail to create net/mlx5: SF, Fix add port error handling net/mlx5: Fix a lockdep warning as part of the write combining test net/mlx5: Fix RDMA TX steering prio net: make page_pool_ref_netmem work with net iovs net: ethernet: xgbe: re-add aneg to supported features in PHY quirks net: pcs: xpcs: actively unset DW_VR_MII_DIG_CTRL1_2G5_EN for 1G SGMII net: pcs: xpcs: fix DW_VR_MII_DIG_CTRL1_2G5_EN bit being set for 1G SGMII w/o inband selftests: net: Adapt ethtool mq tests to fix in qdisc graft net: fec: handle page_pool_dev_alloc_pages error net: netpoll: ensure skb_pool list is always initialized net: xilinx: axienet: Fix IRQ coalescing packet count overflow nfp: bpf: prevent integer overflow in nfp_bpf_event_output() selftests: mptcp: avoid spurious errors on disconnect mptcp: fix spurious wake-up on under memory pressure mptcp: be sure to send ack when mptcp-level window re-opens ...
2025-01-16selftests/ftrace: Add test that tests event :mod: commandsSteven Rostedt
Now that here's a :mod: command that can be sent into set_event, add a test that tests its use. Both setting events for a loaded module, as well as caching what events to set for a module that is not loaded yet. Cc: Shuah Khan <shuah@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-kselftest@vger.kernel.org Link: https://lore.kernel.org/20250116143533.819228058@goodmis.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-01-15selftest: net-drv: hds: add test for HDS featureTaehee Yoo
HDS/HDS-thresh features were updated/implemented. so add some tests for these features. HDS tests are the same with `ethtool -G eth0 tcp-data-split <on | off | auto >` but `auto` depends on driver specification. So, it doesn't include `auto` case. HDS-thresh tests are same with `ethtool -G eth0 hds-thresh <0 - MAX>` It includes both 0 and MAX cases. It also includes exceed case, MAX + 1. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250114142852.3364986-11-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15selftests/net/forwarding: teamd command not foundAlessandro Zanni
Running "make kselftest TARGETS=net/forwarding" results in multiple ccurrences of the same error: - ./lib.sh: line 787: teamd: command not found This patch adds the variable $REQUIRE_TEAMD in every test that uses the command teamd and checks the $REQUIRE_TEAMD variable in the file "lib.sh" to skip the test if the command is not installed. Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com> Link: https://patch.msgid.link/20250114003323.97207-1-alessandro.zanni87@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15selftests: mptcp: connect: better display the files sizeMatthieu Baerts (NGI0)
'du' will print the name of the file, which was already displayed before, e.g. Created /tmp/tmp.UOyy0ghfmQ (size 4703740/tmp/tmp.UOyy0ghfmQ) containing data sent by client Created /tmp/tmp.xq3zvFinGo (size 1391724/tmp/tmp.xq3zvFinGo) containing data sent by server 'stat' can be used instead, to display this instead: Created /tmp/tmp.UOyy0ghfmQ (size 4703740 B) containing data sent by client Created /tmp/tmp.xq3zvFinGo (size 1391724 B) containing data sent by server So easier to spot the file sizes. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-6-2ffb16a6cf35@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15selftests: mptcp: connect: remove unused variableMatthieu Baerts (NGI0)
'cin_disconnect' is used in run_tests_disconnect(), but not 'cout_disconnect', so it is safe to drop it. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-5-2ffb16a6cf35@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15selftests: mptcp: add -m with ss in case of errorsMatthieu Baerts (NGI0)
Recently, we had an issue where getting info about the memory would have helped better understanding what went wrong. Let add it just in case for later. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-4-2ffb16a6cf35@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15selftests: mptcp: move stats info in case of errors to lib.shMatthieu Baerts (NGI0)
A few MPTCP selftests are using the same code to print stats in case of error. This code can then be moved to mptcp_lib.sh. No behaviour changes intended, except to print the error in red and to stderr, like most error messages. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-3-2ffb16a6cf35@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15selftests: mptcp: sockopt: save nstat infosGeliang Tang
Similar to the way nstat information is stored in mptcp_connect.sh and mptcp_join.sh scripts, this patch adds a similar way for mptcp_sockopt.sh and displays the nstat information when errors occur. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-2-2ffb16a6cf35@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15selftests: mptcp: simult_flows: unify errors msgsMatthieu Baerts (NGI0)
In order to unify what is printed in case of error, similar to what is done in mptcp_connect.sh and mptcp_join.sh, it is interesting to do the following modifications in simult_flows.sh: - Print the rc errors at the end of the line. - Print the MIB counters. - Use the same ss options: add -M (MPTCP sockets) and -e (detailed socket information). While at it, also print of the 'max' time only in case of success, because 'mptcp_connect.c' will already print this info in case of error, e.g.: transfer slower than expected! runtime 11948 ms, expected 11921 ms Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-1-2ffb16a6cf35@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15selftests/rseq: Fix handling of glibc without rseq supportMathieu Desnoyers
When porting librseq commit: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") from librseq to the kernel selftests, the following line was missed at the end of rseq_init(): rseq_size = get_rseq_kernel_feature_size(); which effectively leaves rseq_size initialized to -1U when glibc does not have rseq support. glibc supports rseq from version 2.35 onwards. In a following librseq commit commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") to mimic the libc behavior, a new approach is taken: don't set the feature size in 'rseq_size' until at least one thread has successfully registered. This allows using 'rseq_size' in fast-paths to test for both registration status and available features. The caveat is that on libc either all threads are registered or none are, while with bare librseq it is the responsability of the user to register all threads using rseq. This combines the changes from the following librseq git commits: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") Fixes: a0cc649353bb ("selftests/rseq: Fix mm_cid test failure") Reported-by: Raghavendra Rao Ananta <rananta@google.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Raghavendra Rao Ananta <rananta@google.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Carlos O'Donell <carlos@redhat.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Michael Jeanson <mjeanson@efficios.com> Cc: linux-kselftest@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-01-15Merge tag 'loongarch-kvm-6.14' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD LoongArch KVM changes for v6.14 1. Clear LLBCTL if secondary mmu mapping changed. 2. Add hypercall service support for usermode VMM. This is a really small changeset, because the Chinese New Year (Spring Festival) is coming. Happy New Year!
2025-01-15selftests/bpf: Fix test_xdp_adjust_tail_grow2 selftest on powerpcSaket Kumar Bhaskar
On powerpc cache line size is 128 bytes, so skb_shared_info must be aligned accordingly. Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20250110103109.3670793-1-skb99@linux.ibm.com
2025-01-15selftests: net: Adapt ethtool mq tests to fix in qdisc graftVictor Nogueira
Because of patch[1] the graft behaviour changed So the command: tcq replace parent 100:1 handle 204: Is no longer valid and will not delete 100:4 added by command: tcq replace parent 100:4 handle 204: pfifo_fast So to maintain the original behaviour, this patch manually deletes 100:4 and grafts 100:1 Note: This change will also work fine without [1] [1] https://lore.kernel.org/netdev/20250111151455.75480-1-jhs@mojatatu.com/T/#u Signed-off-by: Victor Nogueira <victor@mojatatu.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-01-14selftests/resctrl: Discover SNC kernel support and adjust messagesMaciej Wieczor-Retman
Resctrl selftest prints a message on test failure that Sub-Numa Clustering (SNC) could be enabled and points the user to check their BIOS settings. No actual check is performed before printing that message so it is not very accurate in pinpointing a problem. When there is SNC support for kernel's resctrl subsystem and SNC is enabled then sub node files are created for each node in the resctrlfs. The sub node files exist in each regular node's L3 monitoring directory. The reliable path to check for existence of sub node files is /sys/fs/resctrl/mon_data/mon_L3_00/mon_sub_L3_00. Add helper that checks for mon_sub_L3_00 existence. Correct old messages to account for kernel support of SNC in resctrl. Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-01-14selftests/resctrl: Adjust effective L3 cache size with SNC enabledMaciej Wieczor-Retman
Sub-NUMA Cluster divides CPUs sharing an L3 cache into separate NUMA nodes. Systems may support splitting into either two, three, four or six nodes. When SNC mode is enabled the effective amount of L3 cache available for allocation is divided by the number of nodes per L3. It's possible to detect which SNC mode is active by comparing the number of CPUs that share a cache with CPU0, with the number of CPUs on node0. Detect SNC mode once and let other tests inherit that information. Update CFLAGS after including lib.mk in the Makefile so that fallthrough macro can be used. To check if SNC detection is reliable one can check the /sys/devices/system/cpu/offline file. If it's empty, it means all cores are operational and the ratio should be calculated correctly. If it has any contents, it means the detected SNC mode can't be trusted and should be disabled. Check if detection was not reliable due to offline cpus. If it was skip running tests since the results couldn't be trusted. Co-developed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-01-14selftests/ftrace: Make uprobe test more robust against binary nameMasami Hiramatsu (Google)
Make add_remove_uprobe test case more robust against various real binary name. Current add_remove_uprobe.tc test expects the real binary of /bin/sh is '*/bin/*sh', but it does not work on busybox environment. Instead of using fixed pattern, use readlink to identify real binary name. Link: https://lore.kernel.org/r/173625187633.1383744.2840679071525852811.stgit@devnote2 Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-01-14selftests/ftrace: Fix to use remount when testing mount GID optionMasami Hiramatsu (Google)
Fix mount_options.tc to use remount option to mount the tracefs. Since the current implementation does not umount the tracefs, this test always fails because of -EBUSY error. Using remount option will allow us to change the mount option. Link: https://lore.kernel.org/r/173625186741.1383744.16707876180798573039.stgit@devnote2 Fixes: 8b55572e5180 ("tracing/selftests: Add tracefs mount options test") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-01-14selftests: tmpfs: Add kselftest support to tmpfsShivam Chaudhary
Replace direct error handling with 'ksft_test_result_*' macros for better reporting. Test logs: Before change: - Without root error: unshare, errno 1 - With root No, output After change: - Without root TAP version 13 1..1 ok 2 # SKIP This test needs root to run! Totals: pass:0 fail:0 xfail:0 xpass:0 skip:1 error:0 - With root TAP version 13 1..1 ok 1 Test : Success Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0 Link: https://lore.kernel.org/r/20250105085255.124929-3-cvam0000@gmail.com Signed-off-by: Shivam Chaudhary <cvam0000@gmail.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-01-14selftests: tmpfs: Add Test-skip if not run as rootShivam Chaudhary
Add 'ksft_exit_skip()', if not run as root, with an appropriate Warning. Add 'ksft_print_header()' and 'ksft_set_plan()' to structure test outputs more effectively. Test logs: Before Change: - Without root error: unshare, errno 1 - With root No, output After change: - Without root TAP version 13 1..1 ok 2 # SKIP This test needs root to run! Totals: pass:0 fail:0 xfail:0 xpass:0 skip:1 error:0 - With root TAP version 13 1..1 Link: https://lore.kernel.org/r/20250105085255.124929-2-cvam0000@gmail.com Signed-off-by: Shivam Chaudhary <cvam0000@gmail.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-01-14selftests: harness: fix printing of mismatch values in __EXPECT()Dmitry V. Levin
intptr_t and uintptr_t are not big enough types on 32-bit architectures when printing 64-bit values, resulting to the following incorrect diagnostic output: # get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (3134324433) Replace intptr_t and uintptr_t with intmax_t and uintmax_t, respectively. With this fix, the same test produces more usable diagnostic output: # get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (18446744072548908753) Link: https://lore.kernel.org/r/20250108170757.GA6723@strace.io Fixes: b5bb6d3068ea ("selftests/seccomp: fix 32-bit build warnings") Signed-off-by: Dmitry V. Levin <ldv@strace.io> Reviewed-by: Kees Cook <kees@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-01-14selftests/ring-buffer: Add test for out-of-bound pgoff mappingVincent Donnefort
Extend the ring-buffer mapping test coverage by checking an out-of-bound pgoff which has proven to be problematic in the past. Link: https://lore.kernel.org/r/20241218170318.2814991-1-vdonnefort@google.com Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-01-14selftests/run_kselftest.sh: Fix help string for --per-test-logBrendan Jackman
This is documented as --per_test_log but the argument is actually --per-test-log. Link: https://lore.kernel.org/r/20241220-per-test-log-v1-1-de5afe69fdf4@google.com Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-01-14selftests: acct: Add ksft_exit_skip if not running as rootShivam Chaudhary
If the selftest is not running as root, it should skip not fail and give an appropriate warning to the user. This patch adds ksft_exit_skip() if the test is not running as root. Logs: Before change: TAP version 13 1..1 ok 1 # SKIP This test needs root to run! After change: TAP version 13 1..1 ok 2 # SKIP This test needs root to run! Totals: pass:0 fail:0 xfail:0 xpass:0 skip:1 error:0 Link: https://lore.kernel.org/r/20241210123212.332050-1-cvam0000@gmail.com Signed-off-by: Shivam Chaudhary <cvam0000@gmail.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-01-14selftests: kselftest: Fix the wrong format specifierzhang jiao
The format specifier of "unsigned int" in printf() should be "%u", not "%d". Link: https://lore.kernel.org/r/20241202043111.3888-1-zhangjiao2@cmss.chinamobile.com Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-01-14selftests: timers: clocksource-switch: Adapt progress to kselftest frameworkGeert Uytterhoeven
When adapting the test to the kselftest framework, a few printf() calls indicating test progress were not updated. Fix this by replacing these printf() calls by ksft_print_msg() calls. Link: https://lore.kernel.org/r/7dd4b9ab6e43268846e250878ebf25ae6d3d01ce.1733994134.git.geert+renesas@glider.be Fixes: ce7d101750ff ("selftests: timers: clocksource-switch: adapt to kselftest framework") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-01-14selftests/zram: gitignore output fileLi Zhijian
After `make run_tests`, the git status complains: Untracked files: (use "git add <file>..." to include in what will be committed) zram/err.log This file will be cleaned up when execute 'make clean' Link: https://lore.kernel.org/r/20241211004625.5308-1-lizhijian@fujitsu.com Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-01-14selftests/filesystems: Add missing gitignore fileLi Zhijian
Compiled binary files should be added to .gitignore 'git status' complains: Untracked files: (use "git add <file>..." to include in what will be committed) filesystems/statmount/statmount_test_ns Link: https://lore.kernel.org/r/20241211004947.5806-1-lizhijian@fujitsu.com Cc: Shuah Khan <shuah@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Tested-by: Charlie Jenkins <charlie@rivosinc.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 16:45:17 +0000