summaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)Author
2015-04-02selftest/memfd: enable cross compilationTyler Baker
Use the CC variable instead of hard coding gcc. Also clean up the compiler options by creating a CFLAGS variable. Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-04-02kselftests: timers: Make set-timer-lat fail more gracefully for !CAP_WAKE_ALARMJohn Stultz
The set-timer-lat test fails when testing CLOCK_BOOTTIME_ALARM or CLOCK_REALTIME_ALARM when the user isn't running as root or with CAP_WAKE_ALARM. So this patch improves the error checking so we report the issue more clearly and continue rather then reporting a failure. Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-04-01selftests: Change memory on-off-test.sh name to be uniqueShuah Khan
cpu and memory hotplug scripts use the same name. Change memory on-off-test.sh to mem-on-off-test.sh. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-01selftests: change cpu on-off-test.sh name to be uniqueShuah Khan
cpu and memory hotplug scripts use the same name. Change cpu on-off-test.sh to cpu-on-off-test.sh. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-31selftests/mount: Make git ignore all binaries in mount test suiteZhang Zhen
This patch includes the mount test binaries into the .gitignore file listing in their respective directories. This will make sure that git ignores all of these test binaries when displaying status. Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-31kselftests: timers: Reduce default runtime on inconsistency-check and ↵John Stultz
set-timer-lat For the default run_timers target, the timers tests takes the majority of kselftests runtime. So this patch reduces the default runtime for inconsistentcy-check and set-timer-lat, which reduced the runtime almost in half. Before: 11m48.629s After: 6m47.723s Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-31ftracetest: Convert exit -1 to exit $FAILMichael Ellerman
POSIX says that exit takes an unsigned integer between 0 and 255, so using -1 doesn't work on POSIX shells. There is already a well-defined failure code, $FAIL (1), so use that. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-31ftracetest: Cope properly with stack tracer not being enabledMichael Ellerman
If the stack tracer (CONFIG_STACK_TRACER) is disabled, the fgraph-filter-stack test blows chunks: [8] ftrace - function graph filters with stack tracer [FAIL] + reset_tracer + echo nop ./ftracetest: 19: /home/michael/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc: cannot create /proc/sys/kernel/stack_tracer_enabled: Directory nonexistent Fix it by checking if the proc file exists before echoing to it. With the patch applied it fails correctly with: [8] ftrace - function graph filters with stack tracer [UNSUPPORTED] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-28selftests/powerpc: Add a test of the switch_endian() syscallMichael Ellerman
This adds a test of the switch_endian() syscall we added in the previous commit. We test it by calling the endian switch syscall, and then executing some code in the other endian to check everything went as expected. That code checks registers we expect to be maintained are. If the endian switch failed to happen that code sequence will be illegal and cause the test to abort. We then switch back to the original endian, do the same checks and finally write a success message and exit(0). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-27Merge branch 'for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Documentation updates. - Changes permitting use of call_rcu() and friends very early in boot, for example, before rcu_init() is invoked. - Miscellaneous fixes. - Add in-kernel API to enable and disable expediting of normal RCU grace periods. - Improve RCU's handling of (hotplug-) outgoing CPUs. Note: ARM support is lagging a bit here, and these improved diagnostics might generate (harmless) splats. - NO_HZ_FULL_SYSIDLE fixes. - Tiny RCU updates to make it more tiny. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-24tools, update rtctest.c to verify passage of timePrarit Bhargava
rtctest.c checks to see if PIE is functioning by testing if 20 interrupts occur at rates from 2HZ to 64HZ. While this check is good, it does not check to see if the correct amount of time has actually passed. This misses situations where the RTC may be operating at a higher or lower frequency than expected. This patch introduces a simple check to verify if the time passed is less than 10% of what was programmed into the RTC. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: John Stultz <john.stultz@linaro.org> Cc: corbet@lwn.net Cc: rtc-linux@googlegroups.com Cc: linux-doc@vger.kernel.org Cc: a.zummo@towertech.it Cc: prarit@redhat.com Cc: john.stultz@linaro.org Cc: shuahkh@osg.samsung.com Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-24Documentation, split up rtc.txt into documentation and test filePrarit Bhargava
This patch splits rtc.txt into two separate files, one for the documentation itself, and the other for the rtctest.c file. The rtctest file is moved into the kernel tools/testing/selftests/timers directory. This will make automated testing easier. Note that the only difference in the rtc.txt file is that the location of the rtctest.c file has changed. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Acked-by: John Stultz <john.stultz@linaro.org> Cc: corbet@lwn.net Cc: rtc-linux@googlegroups.com Cc: linux-doc@vger.kernel.org Cc: a.zummo@towertech.it Cc: prarit@redhat.com Cc: john.stultz@linaro.org Cc: shuahkh@osg.samsung.com Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-24selftests: Add tool to generate kselftest tar archiveShuah Khan
gen_kselftest_tar.sh tool generates kselftest tar archive. This tool supports uncompressed tar, gz, bz, and xz compression formats and the default compression format is gzip. This tool runs kselftest install tool as its back-end. Usage: cd tools/testing/selftests ./gen_kselftest_tar [ tar | targz | tarbz2 | tarxz ] Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-24selftests: Add kselftest install toolShuah Khan
kselftest_install.sh tool installs selftests in default location which is tools/testing/selftests/kselftest or an user specified location. This tool invokes back-end selftests install target with the install location. Usage: cd tools/testing/selftests ./kselftest_install.sh [ install_dir ] Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-20Merge branches 'doc.2015.02.26a', 'earlycb.2015.03.03a', ↵Paul E. McKenney
'fixes.2015.03.03a', 'gpexp.2015.02.26a', 'hotplug.2015.03.20a', 'sysidle.2015.02.26b' and 'tiny.2015.02.26a' into HEAD doc.2015.02.26a: Documentation changes earlycb.2015.03.03a: Permit early-boot RCU callbacks fixes.2015.03.03a: Miscellaneous fixes gpexp.2015.02.26a: In-kernel expediting of normal grace periods hotplug.2015.03.20a: CPU hotplug fixes sysidle.2015.02.26b: NO_HZ_FULL_SYSIDLE fixes tiny.2015.02.26a: TINY_RCU fixes
2015-03-19selftests: Set CC using CROSS_COMPILE once in lib.mkMichael Ellerman
This avoids repeating the logic in every Makefile. We mimic the top-level Makefile and use $(CROSS_COMPILE)gcc. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-19selftests: Add install support for the powerpc testsMichael Ellerman
The bulk of the selftests are actually below the powerpc sub directory. This adds support for installing them, when on a powerpc machine, or if ARCH and CROSS_COMPILE are set appropriately. This is a little more complicated because of the sub directory structure under powerpc, but much of the common logic in lib.mk is still used. The net effect of the patch is still a reduction in code. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-19selftests/timers: Use shared logic to run and install testsMichael Ellerman
Change the timers Makefile to make use of shared run and install logic in lib.mk. Destructive tests are installed but not run by default. Add a new variable, TEST_PROGS_EXTENDED, which is a list of extra programs to install, but which are not run by the default run_tests logic. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-19kselftest/timers: Set default threadtest values to simplify execution scriptsJohn Stultz
In order to keep the kselftest Makefiles simpler, set the threadtest default values to the ones used in standard run_tests Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-19selftests: Fix build failures when invoked from kselftest targetShuah Khan
Several tests that rely on implicit build rules fail to build, when invoked from the main Makefile kselftest target. These failures are due to --no-builtin-rules and --no-builtin-variables options set in the inherited MAKEFLAGS. --no-builtin-rules eliminates the use of built-in implicit rules and --no-builtin-variables is for not defining built-in variables. These two options override the use of implicit rules resulting in build failures. In addition, inherited LDFLAGS result in build failures and there is no need to define LDFLAGS. Clear LDFLAGS and MAKEFLAG when make is invoked from the main Makefile kselftest target. Fixing this at selftests Makefile avoids changing the main Makefile and keeps this change self contained at selftests level. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-18selftests/powerpc: Rename TARGETS in powerpc selftests makefileMichael Ellerman
This patch changes the name of the make variable TARGETS, to prevent it from colliding with a value set by the user on the command line (as they are recommended to do by tools/testing/selftests/README.txt). Without this patch, "make -C tools/testing/selftests TARGETS=powerpc" will fail. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-18selftests/powerpc: Add test for VPHNGreg Kurz
The goal is to verify vphn_unpack_associativity() parses VPHN numbers correctly. We feed it with a variety of input values and compare with expected results. PAPR+ does not say much about VPHN parsing: I came up with a list of tests that check many simple cases and some corner ones. I wouldn't dare to say the list is exhaustive though. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> [mpe: Rework harness logic, rename to test-vphn, add -m64] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
2015-03-17selftests/powerpc: Build the copyloops with -maltivecMichael Ellerman
The recent change to remove the vrX defines exposed the fact that we are building the copyloops tests without altivec enabled. It depends on the toolchain as to whether altivec is on by default or not, so it only breaks on some toolchains. But we should always enable it. Fixes: c2ce6f9f3dc0 ("powerpc: Change vrX register defines to vX to match gcc and glibc") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-16powerpc: Change vrX register defines to vX to match gcc and glibcAnton Blanchard
As our various loops (copy, string, crypto etc) get more complicated, we want to share implementations between userspace (eg glibc) and the kernel. We also want to write userspace test harnesses to put in tools/testing/selftest. One gratuitous difference between userspace and the kernel is the VMX register definitions - the kernel uses vrX whereas both gcc and glibc use vX. Change the kernel to match userspace. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-13selftests: Add install targetMichael Ellerman
This adds make install support to selftests. The basic usage is: $ cd tools/testing/selftests $ make install That installs into tools/testing/selftests/install, which can then be copied where ever necessary. The install destination is also configurable using eg: $ INSTALL_PATH=/mnt/selftests make install The implementation uses two targets in the child makefiles. The first "install" is expected to install all files into $(INSTALL_PATH). The second, "emit_tests", is expected to emit the test instructions (ie. bash script) on stdout. Separating this from install means the child makefiles need no knowledge of the location of the test script. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-13selftests: Introduce minimal shared logic for running testsMichael Ellerman
This adds a Make include file which most selftests can then include to get the run_tests logic. On its own this has the advantage of some reduction in repetition, and also means the pass/fail message is defined in fewer places. However the key advantage is it will allow us to implement install very simply in a subsequent patch. The default implementation just executes each program in $(TEST_PROGS). We use a variable to hold the default implementation of $(RUN_TESTS) because that gives us a clean way to override it if necessary, ie. using override. The mount, memory-hotplug and mqueue tests use that to provide a different implementation. Tests are not run via /bin/bash, so if they are scripts they must be executable, we add a+x to several. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12selftests/timers: Add set-2038 test from timetest suiteJohn Stultz
Adds the set-2038 test which sets the time to near-edge cases like the start and end of the 32 bit epoch and checks that time behaves properly. There is also a dangerous mode, which lets the clock roll over past 2038 on 32bit systems, which on some older kernels will cause system hangs. Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12selftests/timers: Add set-tai from the timetest suiteJohn Stultz
This patch adds the set-tai test which ensures the tai offset can be set properly from adjtimex. Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12selftests/timers: Add leapcrash test from the timetest suiteJohn Stultz
This change adds the leapcrash test which tests to see if a leapsecond deadlock which was observed from 2.6.26 to 3.3 is present on this system. Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12selftests/timers: Add leap-a-day test from timetest suiteJohn Stultz
This change adds the leap-a-day test which sets STA_INS and STA_DEL each day to trigger leapseconds each day. It also has a mode to jump the time to right before the end of the day each iteration. Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12selftests/timers: Add clocksource-switch test from timetest suiteJohn Stultz
Adds the clocksource-switch tests which continually switches the current clocksource between all the available ones, watching for any timekeeping inconsistencies. Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12selftests/timers: Add skew_consistency test from the timetests suiteJohn Stultz
This change adds the skew_consistency test, which twists the ADJ_FREQUENCY knob back and forth and watches for timekeeping inconsistencies. Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12selftests/timers: Add change_skew test from timetest suiteJohn Stultz
This patch adds the change_skew test which validates the adjtimex freq can be set to various values and then using the inconsistency-check, raw_skew, and nanosleep tests ensures time behaves properly. Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12selftests/timers: Add alarmtimer-suspend test from timetests suiteJohn Stultz
This adds the alarmtimer-suspend test from the timetests suite, which tests that the alarmtimers wake the system up from suspend shortly after the time they were set to fire. Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12selftests/timers: Add adjtimex validation test from timetest suiteJohn Stultz
This adds a adjtimex validation test which checks the behavior for a set of valida and invalid inputs. So far this only tests ADJ_FREQUENCY, but hopefully will grow. Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12selftests/timers: Add mqueue latency test from the timetest suiteJohn Stultz
Add test to validate mqueue timeout latency from the timetest suite Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12selftests/timers: Add threaded time inconsistency test from timetest suiteJohn Stultz
Add the threaded time inconsistency test from the timetest suite. This checks for time inconsistencies between cpus, usually associated with clock skew as sometimes found w/ TSCs. Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12selftests/timers: Add set-timer-lat test from timetest suiteJohn Stultz
Add my set-timer-lat test from the timetest suite. This test checks the latency from set_timer and reports if any are unreasonable (>40ms). Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12selftests/timers: Add clock skew estimation test from timetest suiteJohn Stultz
This adds my clock skew estimation test from the timetest suite. It measures the drift between CLOCK_MONOTONIC and CLOCK_MONOTONIC_RAW and compares it with the current frequency value from adjtimex. It sometimes can trigger false failures when ntpd isn't in a steady state, but its a useful too when doing adjtimex testing. Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12selftests/timers: Add nsleep-lat test from timetest suiteJohn Stultz
Adds my nanosleep latency test from the timetest suite. This checks to make sure we don't see "unreasonable" latencies (> 40ms) when calling nanosleep. Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12selftests/timers: Add inconsistency-check test from timetestsJohn Stultz
This adds my inconsistency-test from my timetests suite, which checks for (single threaded) time inconsistencies across the various clockids. Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12selftests/timers: Add nanosleep test from timetest suiteJohn Stultz
Add my basic nanosleep test from my timetest suite. This test validates that nanosleep doesn't return early against a number of clockids. Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12selftests/timers: Quiet warning due to lack of return check on brkJohn Stultz
The posix_timers.c test has a loop that tries to keep it in kernel space, repeatedly calling brk(). However, it doesn't check the return value, which causes warnings. This patch adds a err value which captures the return value and modifies the test so it will quit if a failure occurs. Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12selftests/timers: Cleanup Makefile to make it easier to add future testsJohn Stultz
Try to streamline the makefile so its easier to add timer/timekeeping tests. Also adds support for the CROSS_COMPILE variable. Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-11rcutorture: Enable slow grace-period initializationsPaul E. McKenney
This commit sets CONFIG_RCU_TORTURE_TEST_SLOW_INIT=y, but leaves the default time zero. This can be overridden by passing the "--bootargs rcutree.gp_init_delay=1" argument to kvm.sh. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-03-11selftests/exec: Check if the syscall exists and bail if notMichael Ellerman
On systems which don't implement sys_execveat(), this test produces a lot of output. Add a check at the beginning to see if the syscall is present, and if not just note one error and return. When we run on a system that doesn't implement the syscall we will get ENOSYS back from the kernel, so change the logic that handles __NR_execveat not being defined to also use ENOSYS rather than -ENOSYS. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: David Drysdale <drysdale@google.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-03torture: Avoid script syntax error when insufficient CPUsPaul E. McKenney
Parentheses are special to bash, so use an overflow flag that doesn't use them. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-02-12Merge tag 'ktest-v3.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest Pull ktest updates from Steven Rostedt: "The following ktest updates were done: o Added timings to various parts of the test (build, install, boot, tests) and report them so that the users can keep track of changes. o Josh Poimboeuf fixed the console output to work better with virtual machine targets. o Various clean ups and fixes" * tag 'ktest-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Place quotes around item variable ktest: Cleanup terminal on dodie() failure ktest: Print build,install,boot,test times at success and failure ktest: Enable user input to the console ktest: Give console process a dedicated tty ktest: Rename start_monitor_and_boot to start_monitor_and_install ktest: Show times for build, install, boot and test ktest: Restore tty settings after closing console ktest: Add timings for commands
2015-02-11Merge tag 'powerpc-3.20-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: - Update of all defconfigs - Addition of a bunch of config options to modernise our defconfigs - Some PS3 updates from Geoff - Optimised memcmp for 64 bit from Anton - Fix for kprobes that allows 'perf probe' to work from Naveen - Several cxl updates from Ian & Ryan - Expanded support for the '24x7' PMU from Cody & Sukadev - Freescale updates from Scott: "Highlights include 8xx optimizations, some more work on datapath device tree content, e300 machine check support, t1040 corenet error reporting, and various cleanups and fixes" * tag 'powerpc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (102 commits) cxl: Add missing return statement after handling AFU errror cxl: Fail AFU initialisation if an invalid configuration record is found cxl: Export optional AFU configuration record in sysfs powerpc/mm: Warn on flushing tlb page in kernel context powerpc/powernv: Add OPAL soft-poweroff routine powerpc/perf/hv-24x7: Document sysfs event description entries powerpc/perf/hv-gpci: add the remaining gpci requests powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated powerpc/perf/hv-24x7: parse catalog and populate sysfs with events perf: define EVENT_DEFINE_RANGE_FORMAT_LITE helper perf: add PMU_EVENT_ATTR_STRING() helper perf: provide sysfs_show for struct perf_pmu_events_attr powerpc/kernel: Avoid initializing device-tree pointer twice powerpc: Remove old compile time disabled syscall tracing code powerpc/kernel: Make syscall_exit a local label cxl: Fix device_node reference counting powerpc/mm: bail out early when flushing TLB page powerpc: defconfigs: add MTD_SPI_NOR (new dependency for M25P80) perf/powerpc: reset event hw state when adding it to the PMU powerpc/qe: Use strlcpy() ...
2015-02-03ktest: Place quotes around item variableSteven Rostedt (Red Hat)
Seems that some of the new console logic causes doprint to possibly get evaluated. When printing a commit message that contains parenthesis, it fails with a shell parsing error. This gets fixed when we add quotes around the $item variable, and prevent it from being evaluated by any shell commands. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 18:11:00 +0000