Age | Commit message (Collapse) | Author |
|
Add a test that exercises bridge binding.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/baf7244fd1fe223a6d93e027584fa9f99dee982c.1734540770.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Alongside the helper ip_link_set_up(), one to set the link down will be
useful as well. Add a helper to determine the link state as well,
ip_link_is_up(), and use it to short-circuit any changes if the state is
already the desired one.
Furthermore, add a helper bridge_vlan_add().
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/856d9e01725fdba21b7f6716358f645b19131af2.1734540770.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove extrenous fprintf
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20241218140018.15607-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc4).
No conflicts.
Adjacent changes:
drivers/net/ethernet/renesas/rswitch.h
32fd46f5b69e ("net: renesas: rswitch: remove speed from gwca structure")
922b4b955a03 ("net: renesas: rswitch: rework ts tags management")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and netfilter.
Current release - regressions:
- rtnetlink: try the outer netns attribute in rtnl_get_peer_net()
- rust: net::phy fix module autoloading
Current release - new code bugs:
- phy: avoid undefined behavior in *_led_polarity_set()
- eth: octeontx2-pf: fix netdev memory leak in rvu_rep_create()
Previous releases - regressions:
- smc: check sndbuf_space again after NOSPACE flag is set in smc_poll
- ipvs: fix clamp() of ip_vs_conn_tab on small memory systems
- dsa: restore dsa_software_vlan_untag() ability to operate on
VLAN-untagged traffic
- eth:
- tun: fix tun_napi_alloc_frags()
- ionic: no double destroy workqueue
- idpf: trigger SW interrupt when exiting wb_on_itr mode
- rswitch: rework ts tags management
- team: fix feature exposure when no ports are present
Previous releases - always broken:
- core: fix repeated netlink messages in queue dump
- mdiobus: fix an OF node reference leak
- smc: check iparea_offset and ipv6_prefixes_cnt when receiving
proposal msg
- can: fix missed interrupts with m_can_pci
- eth: oa_tc6: fix infinite loop error when tx credits becomes 0"
* tag 'net-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
net: mctp: handle skb cleanup on sock_queue failures
net: mdiobus: fix an OF node reference leak
octeontx2-pf: fix error handling of devlink port in rvu_rep_create()
octeontx2-pf: fix netdev memory leak in rvu_rep_create()
psample: adjust size if rate_as_probability is set
netdev-genl: avoid empty messages in queue dump
net: dsa: restore dsa_software_vlan_untag() ability to operate on VLAN-untagged traffic
selftests: openvswitch: fix tcpdump execution
net: usb: qmi_wwan: add Quectel RG255C
net: phy: avoid undefined behavior in *_led_polarity_set()
netfilter: ipset: Fix for recursive locking warning
ipvs: Fix clamp() of ip_vs_conn_tab on small memory systems
can: m_can: fix missed interrupts with m_can_pci
can: m_can: set init flag earlier in probe
rtnetlink: Try the outer netns attribute in rtnl_get_peer_net().
net: netdevsim: fix nsim_pp_hold_write()
idpf: trigger SW interrupt when exiting wb_on_itr mode
idpf: add support for SW triggered interrupts
qed: fix possible uninit pointer read in qed_mcp_nvm_info_populate()
net: ethernet: bgmac-platform: fix an OF node reference leak
...
|
|
Add tests for the new FIB rule flow label selector. Test both good and bad
flows and with both input and output routes.
# ./fib_rule_tests.sh
IPv6 FIB rule tests
[...]
TEST: rule6 check: flowlabel redirect to table [ OK ]
TEST: rule6 check: flowlabel no redirect to table [ OK ]
TEST: rule6 del by pref: flowlabel redirect to table [ OK ]
TEST: rule6 check: iif flowlabel redirect to table [ OK ]
TEST: rule6 check: iif flowlabel no redirect to table [ OK ]
TEST: rule6 del by pref: iif flowlabel redirect to table [ OK ]
TEST: rule6 check: flowlabel masked redirect to table [ OK ]
TEST: rule6 check: flowlabel masked no redirect to table [ OK ]
TEST: rule6 del by pref: flowlabel masked redirect to table [ OK ]
TEST: rule6 check: iif flowlabel masked redirect to table [ OK ]
TEST: rule6 check: iif flowlabel masked no redirect to table [ OK ]
TEST: rule6 del by pref: iif flowlabel masked redirect to table [ OK ]
[...]
Tests passed: 268
Tests failed: 0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix the way tcpdump is executed by:
- Using the right variable for the namespace. Currently the use of the
empty "ns" makes the command fail.
- Waiting until it starts to capture to ensure the interesting traffic
is caught on slow systems.
- Using line-buffered output to ensure logs are available when the test
is paused with "-p". Otherwise the last chunk of data might only be
written when tcpdump is killed.
Fixes: 74cc26f416b9 ("selftests: openvswitch: add interface support")
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20241217211652.483016-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp/sendfile, tcp/limited-transmit, tcp/syscall_bad_arg
Use the standard import and testing method, as described in the
import of tcp/ecn and tcp/close , tcp/sack , tcp/tcp_info.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Soham Chakradeo <sohamch@google.com>
Link: https://patch.msgid.link/20241217185203.297935-5-sohamch.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp/blocking
Use the standard import and testing method, as described in the
import of tcp/ecn and tcp/close , tcp/sack , tcp/tcp_info.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Soham Chakradeo <sohamch@google.com>
Link: https://patch.msgid.link/20241217185203.297935-4-sohamch.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp/timestamping
Use the standard import and testing method, as described in the
import of tcp/ecn , tcp/close , tcp/sack , tcp/tcp_info.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Soham Chakradeo <sohamch@google.com>
Link: https://patch.msgid.link/20241217185203.297935-3-sohamch.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Same as initial tests, import verbatim from
github.com/google/packetdrill, aside from:
- update `source ./defaults.sh` path to adjust for flat dir
- add SPDX headers
- remove author statements if any
- drop blank lines at EOF
Same test process as previous tests. Both with and without debug mode.
Recording the steps once:
make mrproper
vng --build \
--config tools/testing/selftests/net/packetdrill/config \
--config kernel/configs/debug.config
vng -v --run . --user root --cpus 4 -- \
make -C tools/testing/selftests TARGETS=net/packetdrill run_tests
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Soham Chakradeo <sohamch@google.com>
Link: https://patch.msgid.link/20241217185203.297935-2-sohamch.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend cmsg_sender.c with a new option '-Q' to send SO_PRIORITY
ancillary data.
cmsg_so_priority.sh script added to validate SO_PRIORITY behavior
by creating VLAN device with egress QoS mapping and testing packet
priorities using flower filters. Verify that packets with different
priorities are correctly matched and counted by filters for multiple
protocols and IP versions.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-4-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sanity check netlink dumps, to make sure dumps don't have
repeated entries or gaps in IDs.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241213152244.3080955-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This test already catches a netlink bug fixed by this series,
but only when running on HW with many queues. Make sure the
netdevsim instance created has a lot of queues, and constrain
the size of the recv_buffer used by netlink.
While at it test both rx and tx queues.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241213152244.3080955-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
recv_size parameter allows constraining the buffer size for dumps.
It's useful in testing kernel handling of dump continuation,
IOW testing dumps which span multiple skbs.
Let the tests set this parameter when initializing the YNL family.
Keep the normal default, we don't want tests to unintentionally
behave very differently than normal code.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241213152244.3080955-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test the kernel's ability to:
- update the key (but not the version or cipher), only for TLS1.3
- pause decryption after receiving a KeyUpdate message, until a new
RX key has been provided
- reflect the pause/non-readable socket in poll()
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This allows us to generate different keys, so that we can test that
rekey is using the correct one.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull bpf fixes from Daniel Borkmann:
- Fix a bug in the BPF verifier to track changes to packet data
property for global functions (Eduard Zingerman)
- Fix a theoretical BPF prog_array use-after-free in RCU handling of
__uprobe_perf_func (Jann Horn)
- Fix BPF tracing to have an explicit list of tracepoints and their
arguments which need to be annotated as PTR_MAYBE_NULL (Kumar
Kartikeya Dwivedi)
- Fix a logic bug in the bpf_remove_insns code where a potential error
would have been wrongly propagated (Anton Protopopov)
- Avoid deadlock scenarios caused by nested kprobe and fentry BPF
programs (Priya Bala Govindasamy)
- Fix a bug in BPF verifier which was missing a size check for
BTF-based context access (Kumar Kartikeya Dwivedi)
- Fix a crash found by syzbot through an invalid BPF prog_array access
in perf_event_detach_bpf_prog (Jiri Olsa)
- Fix several BPF sockmap bugs including a race causing a refcount
imbalance upon element replace (Michal Luczaj)
- Fix a use-after-free from mismatching BPF program/attachment RCU
flavors (Jann Horn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (23 commits)
bpf: Avoid deadlock caused by nested kprobe and fentry bpf programs
selftests/bpf: Add tests for raw_tp NULL args
bpf: Augment raw_tp arguments with PTR_MAYBE_NULL
bpf: Revert "bpf: Mark raw_tp arguments with PTR_MAYBE_NULL"
selftests/bpf: Add test for narrow ctx load for pointer args
bpf: Check size for BTF-based ctx access of pointer members
selftests/bpf: extend changes_pkt_data with cases w/o subprograms
bpf: fix null dereference when computing changes_pkt_data of prog w/o subprogs
bpf: Fix theoretical prog_array UAF in __uprobe_perf_func()
bpf: fix potential error return
selftests/bpf: validate that tail call invalidates packet pointers
bpf: consider that tail calls invalidate packet pointers
selftests/bpf: freplace tests for tracking of changes_packet_data
bpf: check changes_pkt_data property for extension programs
selftests/bpf: test for changing packet data from global functions
bpf: track changes_pkt_data property for global functions
bpf: refactor bpf_helper_changes_pkt_data to use helper number
bpf: add find_containing_subprog() utility function
bpf,perf: Fix invalid prog_array access in perf_event_detach_bpf_prog
bpf: Fix UAF via mismatching bpf_prog/attachment RCU flavors
...
|
|
Add tests to ensure that arguments are correctly marked based on their
specified positions, and whether they get marked correctly as maybe
null. For modules, all tracepoint parameters should be marked
PTR_MAYBE_NULL by default.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241213221929.3495062-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Arguments to a raw tracepoint are tagged as trusted, which carries the
semantics that the pointer will be non-NULL. However, in certain cases,
a raw tracepoint argument may end up being NULL. More context about this
issue is available in [0].
Thus, there is a discrepancy between the reality, that raw_tp arguments can
actually be NULL, and the verifier's knowledge, that they are never NULL,
causing explicit NULL check branch to be dead code eliminated.
A previous attempt [1], i.e. the second fixed commit, was made to
simulate symbolic execution as if in most accesses, the argument is a
non-NULL raw_tp, except for conditional jumps. This tried to suppress
branch prediction while preserving compatibility, but surfaced issues
with production programs that were difficult to solve without increasing
verifier complexity. A more complete discussion of issues and fixes is
available at [2].
Fix this by maintaining an explicit list of tracepoints where the
arguments are known to be NULL, and mark the positional arguments as
PTR_MAYBE_NULL. Additionally, capture the tracepoints where arguments
are known to be ERR_PTR, and mark these arguments as scalar values to
prevent potential dereference.
Each hex digit is used to encode NULL-ness (0x1) or ERR_PTR-ness (0x2),
shifted by the zero-indexed argument number x 4. This can be represented
as follows:
1st arg: 0x1
2nd arg: 0x10
3rd arg: 0x100
... and so on (likewise for ERR_PTR case).
In the future, an automated pass will be used to produce such a list, or
insert __nullable annotations automatically for tracepoints. Each
compilation unit will be analyzed and results will be collated to find
whether a tracepoint pointer is definitely not null, maybe null, or an
unknown state where verifier conservatively marks it PTR_MAYBE_NULL.
A proof of concept of this tool from Eduard is available at [3].
Note that in case we don't find a specification in the raw_tp_null_args
array and the tracepoint belongs to a kernel module, we will
conservatively mark the arguments as PTR_MAYBE_NULL. This is because
unlike for in-tree modules, out-of-tree module tracepoints may pass NULL
freely to the tracepoint. We don't protect against such tracepoints
passing ERR_PTR (which is uncommon anyway), lest we mark all such
arguments as SCALAR_VALUE.
While we are it, let's adjust the test raw_tp_null to not perform
dereference of the skb->mark, as that won't be allowed anymore, and make
it more robust by using inline assembly to test the dead code
elimination behavior, which should still stay the same.
[0]: https://lore.kernel.org/bpf/ZrCZS6nisraEqehw@jlelli-thinkpadt14gen4.remote.csb
[1]: https://lore.kernel.org/all/20241104171959.2938862-1-memxor@gmail.com
[2]: https://lore.kernel.org/bpf/20241206161053.809580-1-memxor@gmail.com
[3]: https://github.com/eddyz87/llvm-project/tree/nullness-for-tracepoint-params
Reported-by: Juri Lelli <juri.lelli@redhat.com> # original bug
Reported-by: Manu Bretelle <chantra@meta.com> # bugs in masking fix
Fixes: 3f00c5239344 ("bpf: Allow trusted pointers to be passed to KF_TRUSTED_ARGS kfuncs")
Fixes: cb4158ce8ec8 ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL")
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241213221929.3495062-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch reverts commit
cb4158ce8ec8 ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL"). The
patch was well-intended and meant to be as a stop-gap fixing branch
prediction when the pointer may actually be NULL at runtime. Eventually,
it was supposed to be replaced by an automated script or compiler pass
detecting possibly NULL arguments and marking them accordingly.
However, it caused two main issues observed for production programs and
failed to preserve backwards compatibility. First, programs relied on
the verifier not exploring == NULL branch when pointer is not NULL, thus
they started failing with a 'dereference of scalar' error. Next,
allowing raw_tp arguments to be modified surfaced the warning in the
verifier that warns against reg->off when PTR_MAYBE_NULL is set.
More information, context, and discusson on both problems is available
in [0]. Overall, this approach had several shortcomings, and the fixes
would further complicate the verifier's logic, and the entire masking
scheme would have to be removed eventually anyway.
Hence, revert the patch in preparation of a better fix avoiding these
issues to replace this commit.
[0]: https://lore.kernel.org/bpf/20241206161053.809580-1-memxor@gmail.com
Reported-by: Manu Bretelle <chantra@meta.com>
Fixes: cb4158ce8ec8 ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241213221929.3495062-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- arm64 stacktrace: address some fallout from the recent changes to
unwinding across exception boundaries
- Ensure the arm64 signal delivery failure is recoverable - only
override the return registers after all the user accesses took place
- Fix the arm64 kselftest access to SVCR - only when SME is detected
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
kselftest/arm64: abi: fix SVCR detection
arm64: signal: Ensure signal delivery failure is recoverable
arm64: stacktrace: Don't WARN when unwinding other tasks
arm64: stacktrace: Skip reporting LR at exception boundaries
|
|
When using svcr_in to check ZA and Streaming Mode, we should make sure
that the value in x2 is correct, otherwise it may trigger an Illegal
instruction if FEAT_SVE and !FEAT_SME.
Fixes: 43e3f85523e4 ("kselftest/arm64: Add SME support to syscall ABI test")
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241211111639.12344-1-o451686892@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc3).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure that performing narrow ctx loads other than size == 8 are
rejected when the argument is a pointer type.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241212092050.3204165-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Robert Morris reported the following program type which passes the
verifier in [0]:
SEC("struct_ops/bpf_cubic_init")
void BPF_PROG(bpf_cubic_init, struct sock *sk)
{
asm volatile("r2 = *(u16*)(r1 + 0)"); // verifier should demand u64
asm volatile("*(u32 *)(r2 +1504) = 0"); // 1280 in some configs
}
The second line may or may not work, but the first instruction shouldn't
pass, as it's a narrow load into the context structure of the struct ops
callback. The code falls back to btf_ctx_access to ensure correctness
and obtaining the types of pointers. Ensure that the size of the access
is correctly checked to be 8 bytes, otherwise the verifier thinks the
narrow load obtained a trusted BTF pointer and will permit loads/stores
as it sees fit.
Perform the check on size after we've verified that the load is for a
pointer field, as for scalar values narrow loads are fine. Access to
structs passed as arguments to a BPF program are also treated as
scalars, therefore no adjustment is needed in their case.
Existing verifier selftests are broken by this change, but because they
were incorrect. Verifier tests for d_path were performing narrow load
into context to obtain path pointer, had this program actually run it
would cause a crash. The same holds for verifier_btf_ctx_access tests.
[0]: https://lore.kernel.org/bpf/51338.1732985814@localhost
Fixes: 9e15db66136a ("bpf: Implement accurate raw_tp context access via BTF")
Reported-by: Robert Morris <rtm@mit.edu>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241212092050.3204165-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Extend changes_pkt_data tests with test cases freplacing the main
program that does not have subprograms. Try four combinations when
both main program and replacement do and do not change packet data.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241212070711.427443-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter and wireless.
Current release - fix to a fix:
- rtnetlink: fix error code in rtnl_newlink()
- tipc: fix NULL deref in cleanup_bearer()
Current release - regressions:
- ip: fix warning about invalid return from in ip_route_input_rcu()
Current release - new code bugs:
- udp: fix L4 hash after reconnect
- eth: lan969x: fix cyclic dependency between modules
- eth: bnxt_en: fix potential crash when dumping FW log coredump
Previous releases - regressions:
- wifi: mac80211:
- fix a queue stall in certain cases of channel switch
- wake the queues in case of failure in resume
- splice: do not checksum AF_UNIX sockets
- virtio_net: fix BUG()s in BQL support due to incorrect accounting
of purged packets during interface stop
- eth:
- stmmac: fix TSO DMA API mis-usage causing oops
- bnxt_en: fixes for HW GRO: GSO type on 5750X chips and oops
due to incorrect aggregation ID mask on 5760X chips
Previous releases - always broken:
- Bluetooth: improve setsockopt() handling of malformed user input
- eth: ocelot: fix PTP timestamping in presence of packet loss
- ptp: kvm: x86: avoid "fail to initialize ptp_kvm" when simply not
supported"
* tag 'net-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
net: dsa: tag_ocelot_8021q: fix broken reception
net: dsa: microchip: KSZ9896 register regmap alignment to 32 bit boundaries
net: renesas: rswitch: fix initial MPIC register setting
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
Bluetooth: iso: Fix circular lock in iso_conn_big_sync
Bluetooth: iso: Fix circular lock in iso_listen_bis
Bluetooth: SCO: Add support for 16 bits transparent voice setting
Bluetooth: iso: Fix recursive locking warning
Bluetooth: iso: Always release hdev at the end of iso_listen_bis
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
Bluetooth: hci_core: Fix sleeping function called from invalid context
team: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
team: Fix initial vlan_feature set in __team_compute_features
bonding: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
bonding: Fix initial {vlan,mpls}_feature set in bond_compute_features
net, team, bonding: Add netdev_base_features helper
net/sched: netem: account for backlog updates from child qdisc
net: dsa: felix: fix stuck CPU-injected packets with short taprio windows
splice: do not checksum AF_UNIX sockets
net: usb: qmi_wwan: add Telit FE910C04 compositions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix bogus test reports in rpath.sh selftest by adding permanent
neighbor entries, from Phil Sutter.
2) Lockdep reports possible ABBA deadlock in xt_IDLETIMER, fix it by
removing sysfs out of the mutex section, also from Phil Sutter.
3) It is illegal to release basechain via RCU callback, for several
reasons. Keep it simple and safe by calling synchronize_rcu() instead.
This is a partially reverting a botched recent attempt of me to fix
this basechain release path on netdevice removal.
From Florian Westphal.
netfilter pull request 24-12-11
* tag 'nf-24-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: do not defer rule destruction via call_rcu
netfilter: IDLETIMER: Fix for possible ABBA deadlock
selftests: netfilter: Stabilize rpath.sh
====================
Link: https://patch.msgid.link/20241211230130.176937-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Historically, DSA drivers have seen problems with the model in which
bridge VLANs work, particularly with them being offloaded to switchdev
asynchronously relative to when they become active (vlan_filtering=1).
This switchdev API peculiarity was papered over by commit 2ea7a679ca2a
("net: dsa: Don't add vlans when vlan filtering is disabled"), which
introduced other problems, fixed by commit 54a0ed0df496 ("net: dsa:
provide an option for drivers to always receive bridge VLANs") through
an opt-in ds->configure_vlan_while_not_filtering bool (which later
became an opt-out).
The point is that some DSA drivers still skip VLAN configuration while
VLAN-unaware, and there is a desire to get rid of that behavior.
It's hard to deduce from the wording "at least one corner case" what
Andrew saw, but my best guess is that there is a discrepancy of meaning
between bridge pvid and hardware port pvid which caused breakage.
On one side, the Linux bridge with vlan_filtering=0 is completely
VLAN-unaware, and will accept and process a packet the same way
irrespective of the VLAN groups on the ports or the bridge itself
(there may not even be a pvid, and this makes no difference).
On the other hand, DSA switches still do VLAN processing internally,
even with vlan_filtering disabled, but they are expected to classify all
packets to the port pvid. That pvid shouldn't be confused with the
bridge pvid, and there lies the problem.
When a switch port is under a VLAN-unaware bridge, the hardware pvid
must be explicitly managed by the driver to classify all received
packets to it, regardless of bridge VLAN groups. When under a VLAN-aware
bridge, the hardware pvid must be synchronized to the bridge port pvid.
To do this correctly, the pattern is unfortunately a bit complicated,
and involves hooking the pvid change logic into quite a few places
(the ones that change the input variables which determine the value to
use as hardware pvid for a port). See mv88e6xxx_port_commit_pvid(),
sja1105_commit_pvid(), ocelot_port_set_pvid() etc.
The point is that not all drivers used to do that, especially in older
kernels. If a driver is to blindly program a bridge pvid VLAN received
from switchdev while it's VLAN-unaware, this might in turn change the
hardware pvid used by a VLAN-unaware bridge port, which might result in
packet loss depending which other ports have that pvid too (in that same
note, it might also go unnoticed).
To capture that condition, it is sufficient to take a VLAN-unaware
bridge and change the [VLAN-aware] bridge pvid on a single port, to a
VID that isn't present on any other port. This shouldn't have absolutely
any effect on packet classification or forwarding. However, broken
drivers will take the bait, and change their PVID to 3, causing packet
loss.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241210233541.1401837-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On some systems, neighbor discoveries from ns1 for fec0:42::1 (i.e., the
martian trap address) would happen at the wrong time and cause
false-negative test result.
Problem analysis also discovered that IPv6 martian ping test was broken
in that sent neighbor discoveries, not echo requests were inadvertently
trapped
Avoid the race condition by introducing the neighbors to each other
upfront. Also pin down the firewall rules to matching on echo requests
only.
Fixes: efb056e5f1f0 ("netfilter: ip6t_rpfilter: Fix regression with VRF interfaces")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
- fix the offset for kprobe syntax error test case when checking the
BTF arguments on 64-bit powerpc
* tag 'linux_kselftest-fixes-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: adjust offset for kprobe syntax error test
|
|
In 'NOFENTRY_ARGS' test case for syntax check, any offset X of
`vfs_read+X` except function entry offset (0) fits the criterion,
even if that offset is not at instruction boundary, as the parser
comes before probing. But with "ENDBR64" instruction on x86, offset
4 is treated as function entry. So, X can't be 4 as well. Thus, 8
was used as offset for the test case. On 64-bit powerpc though, any
offset <= 16 can be considered function entry depending on build
configuration (see arch_kprobe_on_func_entry() for implementation
details). So, use `vfs_read+20` to accommodate that scenario too.
Link: https://lore.kernel.org/r/20241129202621.721159-1-hbathini@linux.ibm.com
Fixes: 4231f30fcc34a ("selftests/ftrace: Add BTF arguments test cases")
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add a test case with a tail call done from a global sub-program. Such
tails calls should be considered as invalidating packet pointers.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Tail-called programs could execute any of the helpers that invalidate
packet pointers. Hence, conservatively assume that each tail call
invalidates packet pointers.
Making the change in bpf_helper_changes_pkt_data() automatically makes
use of check_cfg() logic that computes 'changes_pkt_data' effect for
global sub-programs, such that the following program could be
rejected:
int tail_call(struct __sk_buff *sk)
{
bpf_tail_call_static(sk, &jmp_table, 0);
return 0;
}
SEC("tc")
int not_safe(struct __sk_buff *sk)
{
int *p = (void *)(long)sk->data;
... make p valid ...
tail_call(sk);
*p = 42; /* this is unsafe */
...
}
The tc_bpf2bpf.c:subprog_tc() needs change: mark it as a function that
can invalidate packet pointers. Otherwise, it can't be freplaced with
tailcall_freplace.c:entry_freplace() that does a tail call.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Try different combinations of global functions replacement:
- replace function that changes packet data with one that doesn't;
- replace function that changes packet data with one that does;
- replace function that doesn't change packet data with one that does;
- replace function that doesn't change packet data with one that doesn't;
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Check if verifier is aware of packet pointers invalidation done in
global functions. Based on a test shared by Nick Zavaritsky in [0].
[0] https://lore.kernel.org/bpf/0498CA22-5779-4767-9C0C-A9515CEA711F@gmail.com/
Suggested-by: Nick Zavaritsky <mejedi@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Verify that the sockmap link was not severed, and socket's entry is indeed
removed from the map when the corresponding descriptor gets closed.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241202-sockmap-replace-v1-2-1e88579e7bd5@rbox.co
|
|
Run VXLAN packets through a gateway. Flip individual bits of the packet
and/or reserved bits of the gateway, and check that the gateway treats the
packets as expected.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/388bef3c30ebc887d4e64cd86a362e2df2f2d2e1.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add ip_link_set_addr(), ip_link_set_up(), ip_addr_add() and ip_route_add()
to the suite of helpers that automatically schedule a corresponding
cleanup.
When setting a new MAC, one needs to remember the old address first. Move
mac_get() from forwarding/ to that end.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/add6bcbe30828fd01363266df20c338cf13aaf25.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let's have a verb in that function name to make it clearer what's going on.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/fbf7c53a429b340b9cff5831280ea8c305a224f9.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"24 hotfixes. 17 are cc:stable. 15 are MM and 9 are non-MM.
The usual bunch of singletons - please see the relevant changelogs for
details"
* tag 'mm-hotfixes-stable-2024-12-07-22-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits)
iio: magnetometer: yas530: use signed integer type for clamp limits
sched/numa: fix memory leak due to the overwritten vma->numab_state
mm/damon: fix order of arguments in damos_before_apply tracepoint
lib: stackinit: hide never-taken branch from compiler
mm/filemap: don't call folio_test_locked() without a reference in next_uptodate_folio()
scatterlist: fix incorrect func name in kernel-doc
mm: correct typo in MMAP_STATE() macro
mm: respect mmap hint address when aligning for THP
mm: memcg: declare do_memsw_account inline
mm/codetag: swap tags when migrate pages
ocfs2: update seq_file index in ocfs2_dlm_seq_next
stackdepot: fix stack_depot_save_flags() in NMI context
mm: open-code page_folio() in dump_page()
mm: open-code PageTail in folio_flags() and const_folio_flags()
mm: fix vrealloc()'s KASAN poisoning logic
Revert "readahead: properly shorten readahead when falling back to do_page_cache_ra()"
selftests/damon: add _damon_sysfs.py to TEST_FILES
selftest: hugetlb_dio: fix test naming
ocfs2: free inode when ocfs2_get_init_inode() fails
nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry()
...
|
|
Fix various integer type conversions by using strtoull and a temporary
variable which is bounds checked before being casted into the
appropriate cfg_* variable for use by the test program.
While here:
- free the strdup'd cfg string for overall hygenie.
- initialize napi_id = 0 in setup_queue to avoid warnings on some
compilers.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241204163239.294123-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test assumes that the packet it is sending is the only packet being
passed to the device.
However, it is not the case and so other packets are filling the buffers
as well. Therefore, the test sometimes fails because it is reading a
maximum occupancy that is larger than expected.
Add egress filters on $h1 and $h2 that will guarantee the above.
Fixes: a865ad999603 ("selftests: mlxsw: Add shared buffer traffic test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/64c28bc9b1cc1d78c4a73feda7cedbe9526ccf8b.1733414773.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On both port_tc_ip_test() and port_tc_arp_test(), the max occupancy is
checked on $h2 twice, when only the error message is different and does not
match the check itself.
Remove the two duplicated test cases from the test.
Fixes: a865ad999603 ("selftests: mlxsw: Add shared buffer traffic test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/d9eb26f6fc16a06a30b5c2c16ad80caf502bc561.1733414773.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test is sending only one packet generated with mausezahn from $h1 to
$h2. However, for some reason, it is testing for non-zero maximum occupancy
in both the ingress pool of $h1 and $h2. The former only passes when $h2
happens to send a packet.
Avoid intermittent failures by removing unintentional test case
regarding the ingress pool of $h1.
Fixes: a865ad999603 ("selftests: mlxsw: Add shared buffer traffic test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/5b7344608d5e06f38209e48d8af8c92fa11b6742.1733414773.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull bpf fixes from Daniel Borkmann::
- Fix several issues for BPF LPM trie map which were found by syzbot
and during addition of new test cases (Hou Tao)
- Fix a missing process_iter_arg register type check in the BPF
verifier (Kumar Kartikeya Dwivedi, Tao Lyu)
- Fix several correctness gaps in the BPF verifier when interacting
with the BPF stack without CAP_PERFMON (Kumar Kartikeya Dwivedi,
Eduard Zingerman, Tao Lyu)
- Fix OOB BPF map writes when deleting elements for the case of xsk map
as well as devmap (Maciej Fijalkowski)
- Fix xsk sockets to always clear DMA mapping information when
unmapping the pool (Larysa Zaremba)
- Fix sk_mem_uncharge logic in tcp_bpf_sendmsg to only uncharge after
sent bytes have been finalized (Zijian Zhang)
- Fix BPF sockmap with vsocks which was missing a queue check in poll
and sockmap cleanup on close (Michal Luczaj)
- Fix tools infra to override makefile ARCH variable if defined but
empty, which addresses cross-building tools. (Björn Töpel)
- Fix two resolve_btfids build warnings on unresolved bpf_lsm symbols
(Thomas Weißschuh)
- Fix a NULL pointer dereference in bpftool (Amir Mohammadi)
- Fix BPF selftests to check for CONFIG_PREEMPTION instead of
CONFIG_PREEMPT (Sebastian Andrzej Siewior)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (31 commits)
selftests/bpf: Add more test cases for LPM trie
selftests/bpf: Move test_lpm_map.c to map_tests
bpf: Use raw_spinlock_t for LPM trie
bpf: Switch to bpf mem allocator for LPM trie
bpf: Fix exact match conditions in trie_get_next_key()
bpf: Handle in-place update for full LPM trie correctly
bpf: Handle BPF_EXIST and BPF_NOEXIST for LPM trie
bpf: Remove unnecessary kfree(im_node) in lpm_trie_update_elem
bpf: Remove unnecessary check when updating LPM trie
selftests/bpf: Add test for narrow spill into 64-bit spilled scalar
selftests/bpf: Add test for reading from STACK_INVALID slots
selftests/bpf: Introduce __caps_unpriv annotation for tests
bpf: Fix narrow scalar spill onto 64-bit spilled scalar slots
bpf: Don't mark STACK_INVALID as STACK_MISC in mark_stack_slot_misc
samples/bpf: Remove unnecessary -I flags from libbpf EXTRA_CFLAGS
bpf: Zero index arg error string for dynptr and iter
selftests/bpf: Add tests for iter arg check
bpf: Ensure reg is PTR_TO_STACK in process_iter_arg
tools: Override makefile ARCH variable if defined, but empty
selftests/bpf: Add apply_bytes test to test_txmsg_redir_wait_sndmem in test_sockmap
...
|
|
Add more test cases for LPM trie in test_maps:
1) test_lpm_trie_update_flags
It constructs various use cases for BPF_EXIST and BPF_NOEXIST and check
whether the return value of update operation is expected.
2) test_lpm_trie_update_full_maps
It tests the update operations on a full LPM trie map. Adding new node
will fail and overwriting the value of existed node will succeed.
3) test_lpm_trie_iterate_strs and test_lpm_trie_iterate_ints
There two test cases test whether the iteration through get_next_key is
sorted and expected. These two test cases delete the minimal key after
each iteration and check whether next iteration returns the second
minimal key. The only difference between these two test cases is the
former one saves strings in the LPM trie and the latter saves integers.
Without the fix of get_next_key, these two cases will fail as shown
below:
test_lpm_trie_iterate_strs(1091):FAIL:iterate #2 got abc exp abS
test_lpm_trie_iterate_ints(1142):FAIL:iterate #1 got 0x2 exp 0x1
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-10-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Move test_lpm_map.c to map_tests/ to include LPM trie test cases in
regular test_maps run. Most code remains unchanged, including the use of
assert(). Only reduce n_lookups from 64K to 512, which decreases
test_lpm_map runtime from 37s to 0.7s.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-9-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When running selftests I encountered the following error message with
some damon tests:
# Traceback (most recent call last):
# File "[...]/damon/./damos_quota.py", line 7, in <module>
# import _damon_sysfs
# ModuleNotFoundError: No module named '_damon_sysfs'
Fix this by adding the _damon_sysfs.py file to TEST_FILES so that it
will be available when running the respective damon selftests.
Link: https://lkml.kernel.org/r/20241127-picks-visitor-7416685b-mheyne@amazon.de
Fixes: 306abb63a8ca ("selftests/damon: implement a python module for test-purpose DAMON sysfs controls")
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|