| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Nothing really major this release, despite quite a lot of activity.
Just lots of things all over the place.
Some things of note include:
- Access via perf to a new type of PMU (IMC) on Power9, which can
count both core events as well as nest unit events (Memory
controller etc).
- Optimisations to the radix MMU TLB flushing, mostly to avoid
unnecessary Page Walk Cache (PWC) flushes when the structure of the
tree is not changing.
- Reworks/cleanups of do_page_fault() to modernise it and bring it
closer to other architectures where possible.
- Rework of our page table walking so that THP updates only need to
send IPIs to CPUs where the affected mm has run, rather than all
CPUs.
- The size of our vmalloc area is increased to 56T on 64-bit hash MMU
systems. This avoids problems with the percpu allocator on systems
with very sparse NUMA layouts.
- STRICT_KERNEL_RWX support on PPC32.
- A new sched domain topology for Power9, to capture the fact that
pairs of cores may share an L2 cache.
- Power9 support for VAS, which is a new mechanism for accessing
coprocessors, and initial support for using it with the NX
compression accelerator.
- Major work on the instruction emulation support, adding support for
many new instructions, and reworking it so it can be used to
implement the emulation needed to fixup alignment faults.
- Support for guests under PowerVM to use the Power9 XIVE interrupt
controller.
And probably that many things again that are almost as interesting,
but I had to keep the list short. Plus the usual fixes and cleanups as
always.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andreas Schwab,
Aneesh Kumar K.V, Anju T Sudhakar, Arvind Yadav, Balbir Singh,
Benjamin Herrenschmidt, Bhumika Goyal, Breno Leitao, Bryant G. Ly,
Christophe Leroy, Cédric Le Goater, Dan Carpenter, Dou Liyang,
Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Hannes
Reinecke, Haren Myneni, Ivan Mikhaylov, John Allen, Julia Lawall,
LABBE Corentin, Laurentiu Tudor, Madhavan Srinivasan, Markus Elfring,
Masahiro Yamada, Matt Brown, Michael Neuling, Murilo Opsfelder Araujo,
Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran,
Paul Mackerras, Rashmica Gupta, Rob Herring, Rui Teng, Sam Bobroff,
Santosh Sivaraj, Scott Wood, Shilpasri G Bhat, Sukadev Bhattiprolu,
Suraj Jitindar Singh, Tobin C. Harding, Victor Aoqui"
* tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (321 commits)
powerpc/xive: Fix section __init warning
powerpc: Fix kernel crash in emulation of vector loads and stores
powerpc/xive: improve debugging macros
powerpc/xive: add XIVE Exploitation Mode to CAS
powerpc/xive: introduce H_INT_ESB hcall
powerpc/xive: add the HW IRQ number under xive_irq_data
powerpc/xive: introduce xive_esb_write()
powerpc/xive: rename xive_poke_esb() in xive_esb_read()
powerpc/xive: guest exploitation of the XIVE interrupt controller
powerpc/xive: introduce a common routine xive_queue_page_alloc()
powerpc/sstep: Avoid used uninitialized error
axonram: Return directly after a failed kzalloc() in axon_ram_probe()
axonram: Improve a size determination in axon_ram_probe()
axonram: Delete an error message for a failed memory allocation in axon_ram_probe()
powerpc/powernv/npu: Move tlb flush before launching ATSD
powerpc/macintosh: constify wf_sensor_ops structures
powerpc/iommu: Use permission-specific DEVICE_ATTR variants
powerpc/eeh: Delete an error out of memory message at init time
powerpc/mm: Use seq_putc() in two functions
macintosh: Convert to using %pOF instead of full_name
...
|
|
Merge updates from Andrew Morton:
- various misc bits
- DAX updates
- OCFS2
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (119 commits)
mm,fork: introduce MADV_WIPEONFORK
x86,mpx: make mpx depend on x86-64 to free up VMA flag
mm: add /proc/pid/smaps_rollup
mm: hugetlb: clear target sub-page last when clearing huge page
mm: oom: let oom_reap_task and exit_mmap run concurrently
swap: choose swap device according to numa node
mm: replace TIF_MEMDIE checks by tsk_is_oom_victim
mm, oom: do not rely on TIF_MEMDIE for memory reserves access
z3fold: use per-cpu unbuddied lists
mm, swap: don't use VMA based swap readahead if HDD is used as swap
mm, swap: add sysfs interface for VMA based swap readahead
mm, swap: VMA based swap readahead
mm, swap: fix swap readahead marking
mm, swap: add swap readahead hit statistics
mm/vmalloc.c: don't reinvent the wheel but use existing llist API
mm/vmstat.c: fix wrong comment
selftests/memfd: add memfd_create hugetlbfs selftest
mm/shmem: add hugetlbfs support to memfd_create()
mm, devm_memremap_pages: use multi-order radix for ZONE_DEVICE lookups
mm/vmalloc.c: halve the number of comparisons performed in pcpu_get_vm_areas()
...
|
|
With the addition of hugetlbfs support in memfd_create, the memfd
selftests should verify correct functionality with hugetlbfs.
Instead of writing a separate memfd hugetlbfs test, modify the
memfd_test program to take an optional argument 'hugetlbfs'. If the
hugetlbfs argument is specified, basic memfd_create functionality will
be exercised on hugetlbfs. If hugetlbfs is not specified, the current
functionality of the test is unchanged.
Note that many of the tests in memfd_test test file sealing operations.
hugetlbfs does not support file sealing, therefore for hugetlbfs all
sealing related tests are skipped.
In order to test on hugetlbfs, there needs to be preallocated huge
pages. A new script (run_tests) is added. This script will first run
the existing memfd_create tests. It will then, attempt to allocate the
required number of huge pages before running the hugetlbfs test. At the
end of testing, it will release any huge pages allocated for testing
purposes.
Link: http://lkml.kernel.org/r/1502495772-24736-3-git-send-email-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Showing zero in the output isn't very self explanatory as a successful
result. Show a more explicit error output if the test fails.
Link: http://lkml.kernel.org/r/20170802165145.22628-4-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Alexey Perevalov <a.perevalov@samsung.com>
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This will retry the UFFDIO_COPY/ZEROPAGE to verify it returns -EEXIST at
the first invocation and then later every 10 seconds.
In the filebacked MAP_SHARED case this also verifies the -EEXIST
triggered in the filesystem pagecache insertion, if the offset in the
file was not a hole.
shmem MAP_SHARED tries to index the newly allocated pagecache in the
radix tree before checking the pagetable so it doesn't need any
assistance to exercise that case.
hugetlbfs checks the pmd to be not none before trying to index the
hugetlbfs page in the radix tree, so it requires to run UFFDIO_COPY into
an alias mapping (the alternative would be to use MADV_DONTNEED to only
zap the pagetables, but that doesn't work on hugetlbfs).
[akpm@linux-foundation.org: fix uffdio_zeropage(), per Mike Kravetz]
Link: http://lkml.kernel.org/r/20170802165145.22628-3-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Alexey Perevalov <a.perevalov@samsung.com>
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add tests for UFFD_FEATURE_SIGBUS feature. The tests will verify signal
delivery instead of userfault events. Also, test use of UFFDIO_COPY to
allocate memory and retry accessing monitored area after signal
delivery.
Also fix a bug in uffd_poll_thread() where 'uffd' is leaked.
Link: http://lkml.kernel.org/r/1501552446-748335-3-git-send-email-prakash.sangappa@oracle.com
Signed-off-by: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Link: http://lkml.kernel.org/r/1497939652-16528-8-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking updates from David Miller:
1) Support ipv6 checksum offload in sunvnet driver, from Shannon
Nelson.
2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
Dumazet.
3) Allow generic XDP to work on virtual devices, from John Fastabend.
4) Add bpf device maps and XDP_REDIRECT, which can be used to build
arbitrary switching frameworks using XDP. From John Fastabend.
5) Remove UFO offloads from the tree, gave us little other than bugs.
6) Remove the IPSEC flow cache, from Florian Westphal.
7) Support ipv6 route offload in mlxsw driver.
8) Support VF representors in bnxt_en, from Sathya Perla.
9) Add support for forward error correction modes to ethtool, from
Vidya Sagar Ravipati.
10) Add time filter for packet scheduler action dumping, from Jamal Hadi
Salim.
11) Extend the zerocopy sendmsg() used by virtio and tap to regular
sockets via MSG_ZEROCOPY. From Willem de Bruijn.
12) Significantly rework value tracking in the BPF verifier, from Edward
Cree.
13) Add new jump instructions to eBPF, from Daniel Borkmann.
14) Rework rtnetlink plumbing so that operations can be run without
taking the RTNL semaphore. From Florian Westphal.
15) Support XDP in tap driver, from Jason Wang.
16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.
17) Add Huawei hinic ethernet driver.
18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
Delalande.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
i40e: avoid NVM acquire deadlock during NVM update
drivers: net: xgene: Remove return statement from void function
drivers: net: xgene: Configure tx/rx delay for ACPI
drivers: net: xgene: Read tx/rx delay for ACPI
rocker: fix kcalloc parameter order
rds: Fix non-atomic operation on shared flag variable
net: sched: don't use GFP_KERNEL under spin lock
vhost_net: correctly check tx avail during rx busy polling
net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
rxrpc: Make service connection lookup always check for retry
net: stmmac: Delete dead code for MDIO registration
gianfar: Fix Tx flow control deactivation
cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
cxgb4: Fix pause frame count in t4_get_port_stats
cxgb4: fix memory leak
tun: rename generic_xdp to skb_xdp
tun: reserve extra headroom only when XDP is set
net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
net: dsa: bcm_sf2: Advertise number of egress queues
...
|
|
When a test process is not able to write to TH_LOG_STREAM, this step
mechanism enable to print the assert number which triggered the failure.
This can be enabled by setting _metadata->no_print to true at the
beginning of the test sequence.
Update the seccomp-bpf test to return 0 if a test succeeded.
This feature is needed for the Landlock tests.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Link: https://lkml.kernel.org/r/CAGXu5j+D-FP8Kt9unNOqKrQJP4DYTpmgkJxWykZyrYiVPz3Y3Q@mail.gmail.com
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core update from Greg KH:
"Here is the "big" driver core update for 4.14-rc1.
It's really not all that big, the largest thing here being some
firmware tests to help ensure that that crazy api is working properly.
There's also a new uevent for when a driver is bound or unbound from a
device, fixing a hole in the driver model that's been there since the
very beginning. Many thanks to Dmitry for being persistent and
pointing out how wrong I was about this all along :)
Patches for the new uevents are already in the systemd tree, if people
want to play around with them.
Otherwise just a number of other small api changes and updates here,
nothing major. All of these patches have been in linux-next for a
while with no reported issues"
* tag 'driver-core-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (28 commits)
driver core: bus: Fix a potential double free
Do not disable driver and bus shutdown hook when class shutdown hook is set.
base: topology: constify attribute_group structures.
base: Convert to using %pOF instead of full_name
kernfs: Clarify lockdep name for kn->count
fbdev: uvesafb: remove DRIVER_ATTR() usage
xen: xen-pciback: remove DRIVER_ATTR() usage
driver core: Document struct device:dma_ops
mod_devicetable: Remove excess description from structured comment
test_firmware: add batched firmware tests
firmware: enable a debug print for batched requests
firmware: define pr_fmt
firmware: send -EINTR on signal abort on fallback mechanism
test_firmware: add test case for SIGCHLD on sync fallback
initcall_debug: add deferred probe times
Input: axp20x-pek - switch to using devm_device_add_group()
Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01
Input: gpio_keys - use devm_device_add_group() for attributes
driver core: add devm_device_add_group() and friends
driver core: add device_{add|remove}_group() helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A rather small update for the time(r) subsystem:
- A new clocksource driver IMX-TPM
- Minor fixes to the alarmtimer facility
- Device tree cleanups for Renesas drivers
- A new kselftest and fixes for the timer related tests
- Conversion of the clocksource drivers to use %pOF
- Use the proper helpers to access rlimits in the posix-cpu-timer
code"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
alarmtimer: Ensure RTC module is not unloaded
clocksource: Convert to using %pOF instead of full_name
clocksource/drivers/bcm2835: Remove message for a memory allocation failure
devicetree: bindings: Remove deprecated properties
devicetree: bindings: Remove unused 32-bit CMT bindings
devicetree: bindings: Deprecate property, update example
devicetree: bindings: r8a73a4 and R-Car Gen2 CMT bindings
devicetree: bindings: R-Car Gen2 CMT0 and CMT1 bindings
devicetree: bindings: Remove sh7372 CMT binding
clocksource/drivers/imx-tpm: Add imx tpm timer support
dt-bindings: timer: Add nxp tpm timer binding doc
posix-cpu-timers: Use dedicated helper to access rlimit values
alarmtimer: Fix unavailable wake-up source in sysfs
timekeeping: Use proper timekeeper for debug code
kselftests: timers: set-timer-lat: Add one-shot timer test cases
kselftests: timers: set-timer-lat: Tweak reporting when timer fires early
kselftests: timers: freq-step: Fix build warning
kselftests: timers: freq-step: Define ADJ_SETOFFSET if device has older kernel headers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:
- Introduce the ORC unwinder, which can be enabled via
CONFIG_ORC_UNWINDER=y.
The ORC unwinder is a lightweight, Linux kernel specific debuginfo
implementation, which aims to be DWARF done right for unwinding.
Objtool is used to generate the ORC unwinder tables during build, so
the data format is flexible and kernel internal: there's no
dependency on debuginfo created by an external toolchain.
The ORC unwinder is almost two orders of magnitude faster than the
(out of tree) DWARF unwinder - which is important for perf call graph
profiling. It is also significantly simpler and is coded defensively:
there has not been a single ORC related kernel crash so far, even
with early versions. (knock on wood!)
But the main advantage is that enabling the ORC unwinder allows
CONFIG_FRAME_POINTERS to be turned off - which speeds up the kernel
measurably:
With frame pointers disabled, GCC does not have to add frame pointer
instrumentation code to every function in the kernel. The kernel's
.text size decreases by about 3.2%, resulting in better cache
utilization and fewer instructions executed, resulting in a broad
kernel-wide speedup. Average speedup of system calls should be
roughly in the 1-3% range - measurements by Mel Gorman [1] have shown
a speedup of 5-10% for some function execution intense workloads.
The main cost of the unwinder is that the unwinder data has to be
stored in RAM: the memory cost is 2-4MB of RAM, depending on kernel
config - which is a modest cost on modern x86 systems.
Given how young the ORC unwinder code is it's not enabled by default
- but given the performance advantages the plan is to eventually make
it the default unwinder on x86.
See Documentation/x86/orc-unwinder.txt for more details.
- Remove lguest support: its intended role was that of a temporary
proof of concept for virtualization, plus its removal will enable the
reduction (removal) of the paravirt API as well, so Rusty agreed to
its removal. (Juergen Gross)
- Clean up and fix FSGS related functionality (Andy Lutomirski)
- Clean up IO access APIs (Andy Shevchenko)
- Enhance the symbol namespace (Jiri Slaby)
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
objtool: Handle GCC stack pointer adjustment bug
x86/entry/64: Use ENTRY() instead of ALIGN+GLOBAL for stub32_clone()
x86/fpu/math-emu: Add ENDPROC to functions
x86/boot/64: Extract efi_pe_entry() from startup_64()
x86/boot/32: Extract efi_pe_entry() from startup_32()
x86/lguest: Remove lguest support
x86/paravirt/xen: Remove xen_patch()
objtool: Fix objtool fallthrough detection with function padding
x86/xen/64: Fix the reported SS and CS in SYSCALL
objtool: Track DRAP separately from callee-saved registers
objtool: Fix validate_branch() return codes
x86: Clarify/fix no-op barriers for text_poke_bp()
x86/switch_to/64: Rewrite FS/GS switching yet again to fix AMD CPUs
selftests/x86/fsgsbase: Test selectors 1, 2, and 3
x86/fsgsbase/64: Report FSBASE and GSBASE correctly in core dumps
x86/fsgsbase/64: Fully initialize FS and GS state in start_thread_common
x86/asm: Fix UNWIND_HINT_REGS macro for older binutils
x86/asm/32: Fix regs_get_register() on segment registers
x86/xen/64: Rearrange the SYSCALL entries
x86/asm/32: Remove a bunch of '& 0xffff' from pt_regs segment reads
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnad:
"The main RCU related changes in this cycle were:
- Removal of spin_unlock_wait()
- SRCU updates
- RCU torture-test updates
- RCU Documentation updates
- Extend the sys_membarrier() ABI with the MEMBARRIER_CMD_PRIVATE_EXPEDITED variant
- Miscellaneous RCU fixes
- CPU-hotplug fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
arch: Remove spin_unlock_wait() arch-specific definitions
locking: Remove spin_unlock_wait() generic definitions
drivers/ata: Replace spin_unlock_wait() with lock/unlock pair
ipc: Replace spin_unlock_wait() with lock/unlock pair
exit: Replace spin_unlock_wait() with lock/unlock pair
completion: Replace spin_unlock_wait() with lock/unlock pair
doc: Set down RCU's scheduling-clock-interrupt needs
doc: No longer allowed to use rcu_dereference on non-pointers
doc: Add RCU files to docbook-generation files
doc: Update memory-barriers.txt for read-to-write dependencies
doc: Update RCU documentation
membarrier: Provide expedited private command
rcu: Remove exports from rcu_idle_exit() and rcu_idle_enter()
rcu: Add warning to rcu_idle_enter() for irqs enabled
rcu: Make rcu_idle_enter() rely on callers disabling irqs
rcu: Add assertions verifying blocked-tasks list
rcu/tracing: Set disable_rcu_irq_enter on rcu_eqs_exit()
rcu: Add TPS() protection for _rcu_barrier_trace strings
rcu: Use idle versions of swait to make idle-hack clear
swait: Add idle variants which don't contribute to load average
...
|
|
Three cases of simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The msg_zerocopy test defines SO_ZEROCOPY if necessary, but its value
is inconsistent with the one in asm-generic.h. Correct that.
Also convert one error to a warning. When the test is complete, report
throughput and close cleanly even if the process did not wait for all
completions.
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
mmio_flush_range() suffers from a lack of clearly-defined semantics,
and is somewhat ambiguous to port to other architectures where the
scope of the writeback implied by "flush" and ordering might matter,
but MMIO would tend to imply non-cacheable anyway. Per the rationale
in 67a3e8fe9015 ("nd_blk: change aperture mapping from WC to WB"), the
only existing use is actually to invalidate clean cache lines for
ARCH_MEMREMAP_PMEM type mappings *without* writeback. Since the recent
cleanup of the pmem API, that also now happens to be the exact purpose
of arch_invalidate_pmem(), which would be a far more well-defined tool
for the job.
Rather than risk potentially inconsistent implementations of
mmio_flush_range() for the sake of one callsite, streamline things by
removing it entirely and instead move the ARCH_MEMREMAP_PMEM related
definitions up to the libnvdimm level, so they can be shared by NFIT
as well. This allows NFIT to be enabled for arm64.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Currently these tests won't build with a `--enable-default-pie`
compiler as they require r30 to be clobbered. This gives
an error:
ptrace-tm-spd-gpr.c:41:2: error: PIC register clobbered by 'r30' in 'asm'
This forces these tests to be built no-pie.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
.llong is an undocumented PPC specific directive. The generic
equivalent is .quad, but even better (because it's self describing) is
.8byte.
Convert all .llong directives to .8byte.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Trivial fix to typos in printf error messages:
"conenct" -> "connect"
"listeen" -> "listen"
thanks to Daniel Borkmann for spotting one of these mistakes
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a new testcase for the IFE type setting in tc. In case
of user specified the type it will check if the ife is correctly
configured to react on it. If it's not specified the default IFE type
should be used.
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a basic test for checking whether kernel is populating
the jited and xlated BPF images. It was used to confirm
the behaviour change from commit d777b2ddbecf ("bpf: don't
zero out the info struct in bpf_obj_get_info_by_fd()"),
which made bpf_obj_get_info_by_fd() usable for retrieving
the image dumps.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sockmap is a bit different than normal stress tests that can run
in parallel as is. We need to reuse the same socket pool and map
pool to get good stress test cases.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When attaching a program to sockmap we need to check map type
is correct.
Fixes: 174a79ff9515 ("bpf: sockmap with sk redirect support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tests packet read/writes and additional skb fields.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add some more sockmap tests to cover,
- forwarding to NULL entries
- more than two maps to test list ops
- forwarding to different map
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the initial sockmap API we provided strparser and verdict programs
using a single attach command by extending the attach API with a the
attach_bpf_fd2 field.
However, if we add other programs in the future we will be adding a
field for every new possible type, attach_bpf_fd(3,4,..). This
seems a bit clumsy for an API. So lets push the programs using two
new type fields.
BPF_SK_SKB_STREAM_PARSER
BPF_SK_SKB_STREAM_VERDICT
This has the advantage of having a readable name and can easily be
extended in the future.
Updates to samples and sockmap included here also generalize tests
slightly to support upcoming patch for multiple map support.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Fixes: 174a79ff9515 ("bpf: sockmap with sk redirect support")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull NTB fixes from Jon Mason:
"NTB bug fixes to address an incorrect ntb_mw_count reference in the
NTB transport, improperly bringing down the link if SPADs are
corrupted, and an out-of-order issue regarding link negotiation and
data passing"
* tag 'ntb-4.13-bugfixes' of git://github.com/jonmason/ntb:
ntb: ntb_test: ensure the link is up before trying to configure the mws
ntb: transport shouldn't disable link due to bogus values in SPADs
ntb: use correct mw_count function in ntb_tool and ntb_transport
|
|
Change common RUN_TESTS to print messages in user friendly TAP13 format.
This change add TAP13 header at the start of RUN_TESTS target run, and
prints the resulting pass/fail messages with test number information in
the TAP 13 format for each test in the run tests list.
This change covers test scripts as well as test programs. Test programs
have an option to use ksft_ API, however test scripts won't be able to.
With this change, test scripts can print TAP13 format output without any
changes to individual scripts.
Test programs can provide TAP13 format output as needed as some tests
already do. Tests that haven't been converted will benefit from this
change. Tests that are converted benefit from the test counts for all
the tests in each test directory.
Running firmware tests:
make --silent -C tools/testing/selftests/firmware/ run_tests
Before the change:
modprobe: ERROR: could not insert 'test_firmware': Operation not
permitted
./fw_filesystem.sh: /sys/devices/virtual/misc/test_firmware not present
You must have the following enabled in your kernel:
CONFIG_TEST_FIRMWARE=y
selftests: fw_filesystem.sh [FAIL]
modprobe: ERROR: could not insert 'test_firmware': Operation not
permitted
selftests: fw_fallback.sh [FAIL]
After the change:
TAP version 13
selftests: fw_filesystem.sh
========================================
modprobe: ERROR: could not insert 'test_firmware': Operation not
permitted
./fw_filesystem.sh: /sys/devices/virtual/misc/test_firmware not present
You must have the following enabled in your kernel:
CONFIG_TEST_FIRMWARE=y
not ok 1..1 selftests: fw_filesystem.sh [FAIL]
selftests: fw_fallback.sh
========================================
modprobe: ERROR: could not insert 'test_firmware': Operation not
permitted
not ok 1..2 selftests: fw_fallback.sh [FAIL]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
Change lib.mk RUN_TESTS to take test list as an argument. This will
allow it to be called from individual test makefiles to run additional
tests that aren't suitable for a default kselftest run. As an example,
timers test includes destructive tests that aren't included in the
common run_tests target.
Change times/Makefile to use RUN_TESTS call with destructive test list
as an argument instead of using its own RUN_TESTS target.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
Suppress "cd" output from run_tests while running tests to declutter the
test results.
Running efivarfs test:
make --silent -C tools/testing/selftests/efivarfs/ run_tests
Before the change:
skip all tests: must be run as root
selftests: efivarfs.sh [PASS]
/lkml/linux-kselftest/tools/testing/selftests/efivarfs
After the change:
skip all tests: must be run as root
selftests: efivarfs.sh [PASS]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
When a test is skipped, instead of using a special exit code of 4, treat
it as pass condition and use exit code of 0. It makes sense to treat skip
as pass since the test couldn't be run as opposed to a failed test.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
clocksource_list array is defined as char [10][30] so
to initialise it we only have to iterate 10 times.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
The test makes a read through a map value pointer, then considers pruning
a branch where the register holds an adjusted map value pointer. It
should not prune, but currently it does.
Signed-off-by: Alexei Starovoitov <ast@fb.com>
[ecree@solarflare.com: added test-name and patch description]
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Writes in straight-line code should not prevent reads from propagating
along jumps. With current verifier code, the jump from 3 to 5 does not
add a read mark on 3:R0 (because 5:R0 has a write mark), meaning that
the jump from 1 to 3 gets pruned as safe even though R0 is NOT_INIT.
Verifier output:
0: (61) r2 = *(u32 *)(r1 +0)
1: (35) if r2 >= 0x0 goto pc+1
R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
2: (b7) r0 = 0
3: (35) if r2 >= 0x0 goto pc+1
R0=inv0 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
4: (b7) r0 = 0
5: (95) exit
from 3 to 5: safe
from 1 to 3: safe
processed 8 insns, stack depth 0
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Validate the behavior of the combination of various timestamp socket
options, and ensure consistency across ip, udp, and tcp.
Signed-off-by: Mike Maloney <maloney@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove rtctest_setdate from run_destructive_tests target. Leave it in
TEST_GEN_PROGS_EXTENDED to be included in the install targets.
Suggested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
When a test exits with skip exit code of 4, "make run_destructive_tests"
halts testing. Fix run_destructive_tests target to handle error exit codes.
Cc: stable <stable@vger.kernel.org> [4.13+]
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
Change default arguments for leap-a-day to always set the time
each iteration (rather then waiting for midnight UTC), and to
only run 10 interations (rather then infinite).
If one wants to wait for midnight UTC, they can use the new -w
flag, and we add a note to the argument help that -i -1 will
run infinitely.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: stable <stable@vger.kernel.org> [4.13+]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
There is no need to keep timers tests in sync with external timers
repo. Drop support for !KTEST to support for building and running
timers tests without kselftest framework.
Reference: https://lkml.org/lkml/2017/8/10/952
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: John Stultz <john.stultz@linaro.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU updates from Paul E. McKenney:
- Removal of spin_unlock_wait()
- SRCU updates
- Torture-test updates
- Documentation updates
- Miscellaneous fixes
- CPU-hotplug fixes
- Miscellaneous non-RCU fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
https://git.linaro.org/people/john.stultz/linux into timers/core
Pull timekeepig updates from John Stultz
- kselftest improvements
- Use the proper timekeeper in the debug code
- Prevent accessing an unavailable wakeup source in the alarmtimer sysfs
interface.
|
|
This patch makes the needed changes to allow each process of
the INNER_LRU_HASH_PREALLOC test to provide its numa node id
when creating the lru map.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The descriptions were reversed, correct this.
Link: http://lkml.kernel.org/r/20170809234635.13443-4-mcgrof@kernel.org
Fixes: 64b671204afd71 ("test_sysctl: add generic script to expand on tests")
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Reported-by: Daniel Mentz <danielmentz@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matt Redfearn <matt.redfearn@imgetc.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Michal Marek <mmarek@suse.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
These testcases are motivated by a recent alarmtimer regression, which
caused one-shot CLOCK_{BOOTTIME,REALTIME}_ALARM timers to become
periodic timers.
The new testcases are very similar to the existing testcases for
repeating timers. But rather than waiting for 5 alarms, they wait for 5
seconds and verify that the alarm fired exactly once.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
Rather than printing an error inside the alarm signal handler, set a
flag that we check later. This keeps the test from spamming the console
every time the alarm fires early. It also fixes the test exiting with
error code 0 if this was the only test failure.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
Fixes the following build warning:
freq-step.c: In function ‘main’:
freq-step.c:271:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
By returning the return values from ksft_success/fail.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
kernel headers
On some systems, the kernel headers haven't been updated to include
ADJ_SETOFFSET, so define it in the test if needed.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
