Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- a handful of selftest fixes
- fix a memory leak in relocation processing during module loading
- avoid sleeping in die()
- fix kprobe instruction slot address calculations
- fix DT node reference leak in SBI idle probing
- avoid initializing out of bounds pages on sparse vmemmap systems with
a gap at the start of their physical memory map
- fix backtracing through exceptions
- _Q_PENDING_LOOPS is now defined whenever QUEUED_SPINLOCKS=y
- local labels in entry.S are now marked with ".L", which prevents them
from trashing backtraces
- a handful of fixes for SBI-based performance counters
* tag 'riscv-for-linus-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
drivers/perf: riscv: Do not allow invalid raw event config
drivers/perf: riscv: Return error for default case
drivers/perf: riscv: Fix Platform firmware event data
tools: selftests: riscv: Add test count for vstate_prctl
tools: selftests: riscv: Add pass message for v_initval_nolibc
riscv: use local label names instead of global ones in assembly
riscv: qspinlock: Fixup _Q_PENDING_LOOPS definition
riscv: stacktrace: fix backtracing through exceptions
riscv: mm: Fix the out of bound issue of vmemmap address
cpuidle: riscv-sbi: fix device node release in early exit of for_each_possible_cpu
riscv: kprobes: Fix incorrect address calculation
riscv: Fix sleeping in invalid context in die()
riscv: module: remove relocation_head rel_entry member allocation
riscv: selftests: Fix warnings pointer masking test
|
|
After reviewing the code, it was found that these macros are never
referenced in the code. Just remove them.
Signed-off-by: Ba Jing <bajing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241118042407.12900-1-bajing@cmss.chinamobile.com
[mic: Reword subject]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Add a new selftest for netconsole that tests the userdata entry limit
functionality. The test performs two key verifications:
1. Create MAX_USERDATA_ITEMS (16) userdata entries successfully
2. Confirm that attempting to create an additional userdata entry fails
The selftest script uses the netcons library and checks the behavior
by attempting to create entries beyond the maximum allowed limit.
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250108-netcons_overflow_test-v3-4-3d85eb091bec@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Modify the cleanup function to remove all userdata keys created during the
test, instead of just deleting a single predefined key. This ensures a
more thorough cleanup of temporary resources.
Move the KEY_PATH variable definition inside the set_user_data function
to reduce global variables and improve encapsulation. The KEY_PATH
variable is now dynamically created when setting user data.
This change has no effect on the current test, while improving an
upcoming test that would create several userdata entries.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250108-netcons_overflow_test-v3-3-3d85eb091bec@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Split helper functions from the netconsole basic test into a separate
library file to enable reuse across different netconsole tests. This
change only moves the existing helper functions to lib/sh/lib_netcons.sh
while preserving the same test functionality.
The helpers provide common functions for:
- Setting up network namespaces and interfaces
- Managing netconsole dynamic targets
- Setting user data
- Handling test dependencies
- Cleanup operations
Do not make any change in the code, other than the mechanical
separation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250108-netcons_overflow_test-v3-2-3d85eb091bec@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc7).
Conflicts:
a42d71e322a8 ("net_sched: sch_cake: Add drop reasons")
737d4d91d35b ("sched: sch_cake: add bounds checks to host bulk flow fairness counts")
Adjacent changes:
drivers/net/ethernet/meta/fbnic/fbnic.h
3a856ab34726 ("eth: fbnic: add IRQ reuse support")
95978931d55f ("eth: fbnic: Revert "eth: fbnic: Add hardware monitoring support via HWMON interface"")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move python code to a separate directory so it can be
packaged as a python module. Updates existing references
in selftests and docs.
Also rename ynl-gen-[c|rst] to ynl_gen_[c|rst], avoid
dashes as these prevent easy imports for entrypoints.
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/a4151bad0e6984e7164d395125ce87fd2e048bf1.1736343575.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, Bluetooth and WPAN.
No outstanding fixes / investigations at this time.
Current release - new code bugs:
- eth: fbnic: revert HWMON support, it doesn't work at all and revert
is similar size as the fixes
Previous releases - regressions:
- tcp: allow a connection when sk_max_ack_backlog is zero
- tls: fix tls_sw_sendmsg error handling
Previous releases - always broken:
- netdev netlink family:
- prevent accessing NAPI instances from another namespace
- don't dump Tx and uninitialized NAPIs
- net: sysctl: avoid using current->nsproxy, fix null-deref if task
is exiting and stick to opener's netns
- sched: sch_cake: add bounds checks to host bulk flow fairness
counts
Misc:
- annual cleanup of inactive maintainers"
* tag 'net-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
rds: sysctl: rds_tcp_{rcv,snd}buf: avoid using current->nsproxy
sctp: sysctl: plpmtud_probe_interval: avoid using current->nsproxy
sctp: sysctl: udp_port: avoid using current->nsproxy
sctp: sysctl: auth_enable: avoid using current->nsproxy
sctp: sysctl: rto_min/max: avoid using current->nsproxy
sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy
mptcp: sysctl: blackhole timeout: avoid using current->nsproxy
mptcp: sysctl: sched: avoid using current->nsproxy
mptcp: sysctl: avail sched: remove write access
MAINTAINERS: remove Lars Povlsen from Microchip Sparx5 SoC
MAINTAINERS: remove Noam Dagan from AMAZON ETHERNET
MAINTAINERS: remove Ying Xue from TIPC
MAINTAINERS: remove Mark Lee from MediaTek Ethernet
MAINTAINERS: mark stmmac ethernet as an Orphan
MAINTAINERS: remove Andy Gospodarek from bonding
MAINTAINERS: update maintainers for Microchip LAN78xx
MAINTAINERS: mark Synopsys DW XPCS as Orphan
net/mlx5: Fix variable not being completed when function returns
rtase: Fix a check for error in rtase_alloc_msix()
net: stmmac: dwmac-tegra: Read iommu stream id from device tree
...
|
|
This contains a pair of fixes for the vector self tests, which avoids
some warnings and provides proper status messages.
* b4-shazam-merge:
tools: selftests: riscv: Add test count for vstate_prctl
tools: selftests: riscv: Add pass message for v_initval_nolibc
Link: https://lore.kernel.org/r/20241220091730.28006-1-yongxuan.wang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add the test count to drop the warning message.
"Planned tests != run tests (0 != 1)"
Fixes: 7cf6198ce22d ("selftests: Test RISC-V Vector prctl interface")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Andy Chiu <AndybnAC@gmail.com>
Link: https://lore.kernel.org/r/20241220091730.28006-3-yongxuan.wang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add the pass message after we successfully complete the test.
Fixes: 5c93c4c72fbc ("selftests: Test RISC-V Vector's first-use handler")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Andy Chiu <AndybnAC@gmail.com>
Link: https://lore.kernel.org/r/20241220091730.28006-2-yongxuan.wang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add a forward and backward iteration test for listmount().
Link: https://lore.kernel.org/r/20241215-vfs-6-14-mount-work-v1-3-fd55922c4af8@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The pidfd header will be included in a sample program and this pulls in
all the mount definitions that would be causing problems.
Link: https://lore.kernel.org/r/20241213-work-mount-rbtree-lockless-v3-9-6e3cdaf9b280@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Test that forward and backward iteration works correctly.
Link: https://lore.kernel.org/r/20241213-work-mount-rbtree-lockless-v3-8-6e3cdaf9b280@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
I'm going to be adding new tests for it and it belongs under
filesystem selftests.
Link: https://lore.kernel.org/r/20241213-work-mount-rbtree-lockless-v3-7-6e3cdaf9b280@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Test listing netdevsim NAPIs before and after a single queue
has been reset (and NAPIs re-added).
Start from resetting the middle queue because edge cases
(first / last) may actually be less likely to trigger bugs.
# ./tools/testing/selftests/net/nl_netdev.py
KTAP version 1
1..4
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Most of our tests use rtnetlink to read device stats, so they
don't expose the drivers much to paths in which device stats
are read under RCU. Add tests which hammer profcs reads to
make sure drivers:
- don't sleep while reporting stats,
- can handle parallel reads,
- can handle device going down while reading.
Set ifname on the env class in NetDrvEnv, we already do that
in NetDrvEpEnv.
KTAP version 1
1..7
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
ok 6 stats.procfs_hammer
# completed up/down cycles: 6
ok 7 stats.procfs_downup_hammer
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250107022932.2087744-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The script tries to resolve the path to the current toolchain using
realpath, which fails in case it's not installed, and since it's run
under -e, it doesn't have the opportunity to display a help message.
Let's detect the absence of the required toolchain before running that
command and provide a friendlier message when this happens.
Link: https://lore.kernel.org/all/ZtlQbpgpn9OQOPyI@1wt.eu/
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Adding kprobe.session probe to bpf_kfunc_common_test that misses bpf
program execution due to recursion check and making sure it increases
the program missed count properly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250106175048.1443905-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Latest versions of GCC BPF use C23 standard by default. This causes
compilation errors in vmlinux.h due to bool types declarations.
Add -std=gnu11 to BPF_CFLAGS and CFLAGS. This aligns with the version
of the standard used when building the kernel currently [1].
For more details see the discussions at [2] and [3].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Makefile#n465
[2] https://lore.kernel.org/bpf/EYcXjcKDCJY7Yb0GGtAAb7nLKPEvrgWdvWpuNzXm2qi6rYMZDixKv5KwfVVMBq17V55xyC-A1wIjrqG3aw-Imqudo9q9X7D7nLU2gWgbN0w=@pm.me/
[3] https://lore.kernel.org/bpf/20250106202715.1232864-1-ihor.solodrai@pm.me/
CC: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Link: https://lore.kernel.org/r/20250107235813.2964472-1-ihor.solodrai@pm.me
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add coverage of the hwcaps for the 2024 dpISA extensions to the hwcap
test.
We don't actually test SIGILL generation for CMPBR since the need to
branch makes it a pain to generate and the SIGILL detection would be
unreliable anyway. Since this should be very unusual we provide a stub
function rather than supporting a missing test.
The sigill functions aren't well sorted in the file so the ordering is a
bit random.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250107-arm64-2024-dpisa-v5-5-7578da51fc3d@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Test a more realistic usage pattern, and one with heavy contention, in order to
actually exercise ntsync's internal synchronization.
This test has several threads in a tight loop acquiring a mutex, modifying some
shared data, and then releasing the mutex. At the end we check if the data is
consistent.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-28-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Expand the alert tests to cover alerting a thread mid-wait, to test that the
relevant scheduling logic works correctly.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-27-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Test the "alert" functionality of NTSYNC_IOC_WAIT_ALL and NTSYNC_IOC_WAIT_ANY,
when a wait is woken with an alert and when it is woken by an object.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-26-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Expand the contended wait tests, which previously only covered events and
semaphores, to cover events as well.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-25-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Test event-specific ioctls NTSYNC_IOC_EVENT_SET, NTSYNC_IOC_EVENT_RESET,
NTSYNC_IOC_EVENT_PULSE, NTSYNC_IOC_EVENT_READ for auto-reset events, and
waiting on auto-reset events.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-24-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Test event-specific ioctls NTSYNC_IOC_EVENT_SET, NTSYNC_IOC_EVENT_RESET,
NTSYNC_IOC_EVENT_PULSE, NTSYNC_IOC_EVENT_READ for manual-reset events, and
waiting on manual-reset events.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-23-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
WINESYNC_IOC_WAIT_ALL.
Test contended "wait-for-all" waits, to make sure that scheduling and wakeup
logic works correctly, and that the wait only exits once objects are all
simultaneously signaled.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-22-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
WINESYNC_IOC_WAIT_ANY.
Test contended "wait-for-any" waits, to make sure that scheduling and wakeup
logic works correctly.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-21-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Test basic synchronous functionality of NTSYNC_IOC_WAIT_ALL, and when objects
are considered simultaneously signaled.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-20-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Test basic synchronous functionality of NTSYNC_IOC_WAIT_ANY, when objects are
considered signaled or not signaled, and how they are affected by a successful
wait.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-19-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Test mutex-specific ioctls NTSYNC_IOC_MUTEX_UNLOCK and NTSYNC_IOC_MUTEX_READ,
and waiting on mutexes.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-18-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Wine has tests for its synchronization primitives, but these are more accessible
to kernel developers, and also allow us to test some edge cases that Wine does
not care about.
This patch adds tests for semaphore-specific ioctls NTSYNC_IOC_SEM_POST and
NTSYNC_IOC_SEM_READ, and waiting on semaphores.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-17-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2025-01-07
We've added 7 non-merge commits during the last 32 day(s) which contain
a total of 11 files changed, 190 insertions(+), 103 deletions(-).
The main changes are:
1) Migrate the test_xdp_meta.sh BPF selftest into test_progs
framework, from Bastien Curutchet.
2) Add ability to configure head/tailroom for netkit devices,
from Daniel Borkmann.
3) Fixes and improvements to the xdp_hw_metadata selftest,
from Song Yoong Siang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Extend netkit tests to validate set {head,tail}room
netkit: Add add netkit {head,tail}room to rt_link.yaml
netkit: Allow for configuring needed_{head,tail}room
selftests/bpf: Migrate test_xdp_meta.sh into xdp_context_test_run.c
selftests/bpf: test_xdp_meta: Rename BPF sections
selftests/bpf: Enable Tx hwtstamp in xdp_hw_metadata
selftests/bpf: Actuate tx_metadata_len in xdp_hw_metadata
====================
Link: https://patch.msgid.link/20250107130908.143644-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The selftest runner currently allows selecting tests via the -t
option. This patch adds a new -l option that lists all available tests,
providing users with an overview of the tests they can choose from. This
enhancement is especially useful for scripting and automation purposes,
making it easier to discover and run tests.
Signed-off-by: Shizhao Chen <shichen@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add a testcase for poll() on hist file. This introduces a helper binary
to the ftracetest, because there is no good way to reliably execute
poll() on hist file.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173547867935.569911.10127126796879854182.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Fixup the uc_attr_mem_limit test case to also cover the
KVM_HAS_DEVICE_ATTR ioctl.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-7-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-7-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add a selftests for the interrupt routing configuration when using
ucontrol VMs.
Calling the test may trigger a null pointer dereferences on kernels not
containing the fixes in this patch series.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-5-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-5-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add some superficial selftests for the floating interrupt controller
when using ucontrol VMs. These tests are intended to cover very basic
calls only.
Some of the calls may trigger null pointer dereferences on kernels not
containing the fixes in this patch series.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-3-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-3-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
A few recently added packetdrill tests that are known time sensitive
(e.g., because testing timestamping) occasionally fail in debug mode:
https://netdev.bots.linux.dev/contest.html?executor=vmksft-packetdrill-dbg
These failures are well understood. Correctness of the tests is
verified in non-debug mode. Continue running in debug mode also, to
keep coverage with debug instrumentation.
But, only in debug mode, mark these tests with well understood
timing issues as XFAIL (known failing) rather than FAIL when failing.
Introduce an allow list xfail_list with known cases.
Expand the ktap infrastructure with XFAIL support.
Fixes: eab35989cc37 ("selftests/net: packetdrill: import tcp/fast_recovery, tcp/nagle, tcp/timestamping")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20241218100013.0c698629@kernel.org/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250103113142.129251-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Implemented handling of prog type and attach type stats comparison in
veristat.
To test this change:
```
./veristat pyperf600.bpf.o -o csv > base1.csv
./veristat pyperf600.bpf.o -o csv > base2.csv
./veristat -C base2.csv base1.csv -o csv
...,raw_tracepoint,raw_tracepoint,MATCH,
...,cgroup_inet_ingress,cgroup_inet_ingress,MATCH
```
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250106144321.32337-1-mykyta.yatsenko5@gmail.com
|
|
Following the discussion at [1], set -fno-strict-aliasing flag for all
BPF object build rules. Remove now unnecessary <test>-CFLAGS variables.
[1] https://lore.kernel.org/bpf/20250106185447.951609-1-ihor.solodrai@pm.me/
CC: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250106201728.1219791-1-ihor.solodrai@pm.me
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a selftest to ensure BPF for loops within critical sections are
accepted by the verifier.
Signed-off-by: Emil Tsalapatis (Meta) <emil@etsalapatis.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250104202528.882482-3-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, when we run the BPF selftests with the following command:
make -C tools/testing/selftests TARGETS=bpf SKIP_TARGETS=""
The command generates untracked files and directories with make version
less than 4.4:
'''
Untracked files:
(use "git add <file>..." to include in what will be committed)
tools/testing/selftests/bpfFEATURE-DUMP.selftests
tools/testing/selftests/bpffeature/
'''
We lost slash after word "bpf". The reason is slash appending code is as
follow:
'''
OUTPUT := $(OUTPUT)/
$(eval include ../../../build/Makefile.feature)
OUTPUT := $(patsubst %/,%,$(OUTPUT))
'''
This way of assigning values to OUTPUT will never be effective for the
variable OUTPUT provided via the command argument [1] and BPF makefile
is called from parent Makfile(tools/testing/selftests/Makefile) like:
'''
all:
...
$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET
'''
According to GNU make, we can use override Directive to fix this issue [2].
[1] https://www.gnu.org/software/make/manual/make.html#Overriding
[2] https://www.gnu.org/software/make/manual/make.html#Override-Directive
Fixes: dc3a8804d790 ("selftests/bpf: Adapt OUTPUT appending logic to lower versions of Make")
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20241224075957.288018-1-mrpre@163.com
|
|
Extend the netkit selftests to specify and validate the {head,tail}room
on the netdevice:
# ./vmtest.sh -- ./test_progs -t netkit
[...]
./test_progs -t netkit
[ 1.174147] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.174585] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
[ 1.422307] tsc: Refined TSC clocksource calibration: 3407.983 MHz
[ 1.424511] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc3e5084, max_idle_ns: 440795359833 ns
[ 1.428092] clocksource: Switched to clocksource tsc
#363 tc_netkit_basic:OK
#364 tc_netkit_device:OK
#365 tc_netkit_multi_links:OK
#366 tc_netkit_multi_opts:OK
#367 tc_netkit_neigh_links:OK
#368 tc_netkit_pkt_type:OK
#369 tc_netkit_scrub:OK
Summary: 7/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/bpf/20241220234658.490686-3-daniel@iogearbox.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"25 hotfixes. 16 are cc:stable. 18 are MM and 7 are non-MM.
The usual bunch of singletons and two doubletons - please see the
relevant changelogs for details"
* tag 'mm-hotfixes-stable-2025-01-04-18-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (25 commits)
MAINTAINERS: change Arınç _NAL's name and email address
scripts/sorttable: fix orc_sort_cmp() to maintain symmetry and transitivity
mm/util: make memdup_user_nul() similar to memdup_user()
mm, madvise: fix potential workingset node list_lru leaks
mm/damon/core: fix ignored quota goals and filters of newly committed schemes
mm/damon/core: fix new damon_target objects leaks on damon_commit_targets()
mm/list_lru: fix false warning of negative counter
vmstat: disable vmstat_work on vmstat_cpu_down_prep()
mm: shmem: fix the update of 'shmem_falloc->nr_unswapped'
mm: shmem: fix incorrect index alignment for within_size policy
percpu: remove intermediate variable in PERCPU_PTR()
mm: zswap: fix race between [de]compression and CPU hotunplug
ocfs2: fix slab-use-after-free due to dangling pointer dqi_priv
fs/proc/task_mmu: fix pagemap flags with PMD THP entries on 32bit
kcov: mark in_softirq_really() as __always_inline
docs: mm: fix the incorrect 'FileHugeMapped' field
mailmap: modify the entry for Mathieu Othacehe
mm/kmemleak: fix sleeping function called from invalid context at print message
mm: hugetlb: independent PMD page table shared count
maple_tree: reload mas before the second call for mas_empty_area
...
|
|
After previous change rshift >= 32 is no longer allowed.
Modify the test to use 31, the test doesn't seem to send
any traffic so the exact value shouldn't matter.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250103182458.1213486-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test which checks that the kstkesp field in /proc/pid/stat can be
read for all threads of a coredumping process.
For full details including the motivation for this test and how it works,
see the README file added by this commit.
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/50e737b6576208566d14efcf1934fe840de6b1f4.1735805772.git.namcao@linutronix.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc6).
No conflicts.
Adjacent changes:
include/linux/if_vlan.h
f91a5b808938 ("af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK")
3f330db30638 ("net: reformat kdoc return statements")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix a bug where bpf_iter_scx_dsq_new() was not initializing the
iterator's flags and could inadvertently enable e.g. reverse
iteration
- Fix a bug where scx_ops_bypass() could call irq_restore twice
- Add Andrea and Changwoo as maintainers for better review coverage
- selftests and tools/sched_ext build and other fixes
* tag 'sched_ext-for-6.13-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix dsq_local_on selftest
sched_ext: initialize kit->cursor.flags
sched_ext: Fix invalid irq restore in scx_ops_bypass()
MAINTAINERS: add me as reviewer for sched_ext
MAINTAINERS: add self as reviewer for sched_ext
scx: Fix maximal BPF selftest prog
sched_ext: fix application of sizeof to pointer
selftests/sched_ext: fix build after renames in sched_ext API
sched_ext: Add __weak to fix the build errors
|