summaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)Author
2024-12-09selftests/mount_setattr: Fix failures on 64K PAGE_SIZE kernelsMichael Ellerman
[ Upstream commit f13242a46438e690067a4bf47068fde4d5719947 ] Currently the mount_setattr_test fails on machines with a 64K PAGE_SIZE, with errors such as: # RUN mount_setattr_idmapped.invalid_fd_negative ... mkfs.ext4: No space left on device while writing out and closing file system # mount_setattr_test.c:1055:invalid_fd_negative:Expected system("mkfs.ext4 -q /mnt/C/ext4.img") (256) == 0 (0) # invalid_fd_negative: Test terminated by assertion # FAIL mount_setattr_idmapped.invalid_fd_negative not ok 12 mount_setattr_idmapped.invalid_fd_negative The code creates a 100,000 byte tmpfs: ASSERT_EQ(mount("testing", "/mnt", "tmpfs", MS_NOATIME | MS_NODEV, "size=100000,mode=700"), 0); And then a little later creates a 2MB ext4 filesystem in that tmpfs: ASSERT_EQ(ftruncate(img_fd, 1024 * 2048), 0); ASSERT_EQ(system("mkfs.ext4 -q /mnt/C/ext4.img"), 0); At first glance it seems like that should never work, after all 2MB is larger than 100,000 bytes. However the filesystem image doesn't actually occupy 2MB on "disk" (actually RAM, due to tmpfs). On 4K kernels the ext4.img uses ~84KB of actual space (according to du), which just fits. However on 64K PAGE_SIZE kernels the ext4.img takes at least 256KB, which is too large to fit in the tmpfs, hence the errors. It seems fraught to rely on the ext4.img taking less space on disk than the allocated size, so instead create the tmpfs with a size of 2MB. With that all 21 tests pass on 64K PAGE_SIZE kernels. Fixes: 01eadc8dd96d ("tests: add mount_setattr() selftests") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20241115134114.1219555-1-mpe@ellerman.id.au Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09powerpc/vdso: Flag VDSO64 entry points as functionsChristophe Leroy
[ Upstream commit 0161bd38c24312853ed5ae9a425a1c41c4ac674a ] On powerpc64 as shown below by readelf, vDSO functions symbols have type NOTYPE. $ powerpc64-linux-gnu-readelf -a arch/powerpc/kernel/vdso/vdso64.so.dbg ELF Header: Magic: 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00 Class: ELF64 Data: 2's complement, big endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: DYN (Shared object file) Machine: PowerPC64 Version: 0x1 ... Symbol table '.dynsym' contains 12 entries: Num: Value Size Type Bind Vis Ndx Name ... 1: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 ... 4: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15 5: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 Symbol table '.symtab' contains 56 entries: Num: Value Size Type Bind Vis Ndx Name ... 45: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15 46: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __kernel_getcpu 47: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __kernel_clock_getres To overcome that, commit ba83b3239e65 ("selftests: vDSO: fix vDSO symbols lookup for powerpc64") was applied to have selftests also look for NOTYPE symbols, but the correct fix should be to flag VDSO entry points as functions. The original commit that brought VDSO support into powerpc/64 has the following explanation: Note that the symbols exposed by the vDSO aren't "normal" function symbols, apps can't be expected to link against them directly, the vDSO's are both seen as if they were linked at 0 and the symbols just contain offsets to the various functions. This is done on purpose to avoid a relocation step (ppc64 functions normally have descriptors with abs addresses in them). When glibc uses those functions, it's expected to use it's own trampolines that know how to reach them. The descriptors it's talking about are the OPD function descriptors used on ABI v1 (big endian). But it would be more correct for a text symbol to have type function, even if there's no function descriptor for it. glibc has a special case already for handling the VDSO symbols which creates a fake opd pointing at the kernel symbol. So changing the VDSO symbol type to function shouldn't affect that. For ABI v2, there is no function descriptors and VDSO functions can safely have function type. So lets flag VDSO entry points as functions and revert the selftest change. Link: https://github.com/mpe/linux-fullhistory/commit/5f2dd691b62da9d9cc54b938f8b29c22c93cb805 Fixes: ba83b3239e65 ("selftests: vDSO: fix vDSO symbols lookup for powerpc64") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-By: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/b6ad2f1ee9887af3ca5ecade2a56f4acda517a85.1728512263.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09wireguard: selftests: load nf_conntrack if not presentHangbin Liu
[ Upstream commit 0290abc9860917f1ee8b58309c2bbd740a39ee8e ] Some distros may not load nf_conntrack by default, which will cause subsequent nf_conntrack sets to fail. Load this module if it is not already loaded. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> [ Jason: add [[ -e ... ]] check so this works in the qemu harness. ] Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://patch.msgid.link/20241117212030.629159-4-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09selftests: net: really check for bg process completionPaolo Abeni
[ Upstream commit 52ed077aa6336dbef83a2d6d21c52d1706fb7f16 ] A recent refactor transformed the check for process completion in a true statement, due to a typo. As a result, the relevant test-case is unable to catch the regression it was supposed to detect. Restore the correct condition. Fixes: 691bb4e49c98 ("selftests: net: avoid just another constant wait") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/0e6f213811f8e93a235307e683af8225cc6277ae.1730828007.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09selftests/bpf: Add push/pop checking for msg_verify_data in test_sockmapZijian Zhang
[ Upstream commit 862087c3d36219ed44569666eb263efc97f00c9a ] Add push/pop checking for msg_verify_data in test_sockmap, except for pop/push with cork tests, in these tests the logic will be different. 1. With corking, pop/push might not be invoked in each sendmsg, it makes the layout of the received data difficult 2. It makes it hard to calculate the total_bytes in the recvmsg Temporarily skip the data integrity test for these cases now, added a TODO Fixes: ee9b352ce465 ("selftests/bpf: Fix msg_verify_data in test_sockmap") Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20241106222520.527076-5-zijianzhang@bytedance.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09selftests/bpf: Fix total_bytes in msg_loop_rx in test_sockmapZijian Zhang
[ Upstream commit 523dffccbadea0cfd65f1ff04944b864c558c4a8 ] total_bytes in msg_loop_rx should also take push into account, otherwise total_bytes will be a smaller value, which makes the msg_loop_rx end early. Besides, total_bytes has already taken pop into account, so we don't need to subtract some bytes from iov_buf in sendmsg_test. The additional subtraction may make total_bytes a negative number, and msg_loop_rx will just end without checking anything. Fixes: 18d4e900a450 ("bpf: Selftests, improve test_sockmap total bytes counter") Fixes: d69672147faa ("selftests, bpf: Add one test for sockmap with strparser") Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20241106222520.527076-4-zijianzhang@bytedance.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09selftests/bpf: Fix SENDPAGE data logic in test_sockmapZijian Zhang
[ Upstream commit 4095031463d4e99b534d2cd82035a417295764ae ] In the SENDPAGE test, "opt->iov_length * cnt" size of data will be sent cnt times by sendfile. 1. In push/pop tests, they will be invoked cnt times, for the simplicity of msg_verify_data, change chunk_sz to iov_length 2. Change iov_length in test_send_large from 1024 to 8192. We have pop test where txmsg_start_pop is 4096. 4096 > 1024, an error will be returned. Fixes: 328aa08a081b ("bpf: Selftests, break down test_sockmap into subtests") Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20241106222520.527076-3-zijianzhang@bytedance.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09selftests/bpf: Add txmsg_pass to pull/push/pop in test_sockmapZijian Zhang
[ Upstream commit 66c54c20408d994be34be2c070fba08472f69eee ] Add txmsg_pass to test_txmsg_pull/push/pop. If txmsg_pass is missing, tx_prog will be NULL, and no program will be attached to the sockmap. As a result, pull/push/pop are never invoked. Fixes: 328aa08a081b ("bpf: Selftests, break down test_sockmap into subtests") Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20241106222520.527076-2-zijianzhang@bytedance.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09selftests/bpf: fix test_spin_lock_fail.c's global vars usageAndrii Nakryiko
[ Upstream commit 1b2bfc29695d273492c3dd8512775261f3272686 ] Global variables of special types (like `struct bpf_spin_lock`) make underlying ARRAY maps non-mmapable. To make this work with libbpf's mmaping logic, application is expected to declare such special variables as static, so libbpf doesn't even attempt to mmap() such ARRAYs. test_spin_lock_fail.c didn't follow this rule, but given it relied on this test to trigger failures, this went unnoticed, as we never got to the step of mmap()'ing these ARRAY maps. It is fragile and relies on specific sequence of libbpf steps, which are an internal implementation details. Fix the test by marking lockA and lockB as static. Fixes: c48748aea4f8 ("selftests/bpf: Add failure test cases for spin lock pairing") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20241023043908.3834423-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09selftests/bpf: Fix txmsg_redir of test_txmsg_pull in test_sockmapZijian Zhang
[ Upstream commit b29e231d66303c12b7b8ac3ac2a057df06b161e8 ] txmsg_redir in "Test pull + redirect" case of test_txmsg_pull should be 1 instead of 0. Fixes: 328aa08a081b ("bpf: Selftests, break down test_sockmap into subtests") Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Link: https://lore.kernel.org/r/20241012203731.1248619-3-zijianzhang@bytedance.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09selftests/bpf: Fix msg_verify_data in test_sockmapZijian Zhang
[ Upstream commit ee9b352ce4650ffc0d8ca0ac373d7c009c7e561e ] Function msg_verify_data should have context of bytes_cnt and k instead of assuming they are zero. Otherwise, test_sockmap with data integrity test will report some errors. I also fix the logic related to size and index j 1/ 6 sockmap::txmsg test passthrough:FAIL 2/ 6 sockmap::txmsg test redirect:FAIL 7/12 sockmap::txmsg test apply:FAIL 10/11 sockmap::txmsg test push_data:FAIL 11/17 sockmap::txmsg test pull-data:FAIL 12/ 9 sockmap::txmsg test pop-data:FAIL 13/ 1 sockmap::txmsg test push/pop data:FAIL ... Pass: 24 Fail: 52 After applying this patch, some of the errors are solved, but for push, pull and pop, we may need more fixes to msg_verify_data, added a TODO 10/11 sockmap::txmsg test push_data:FAIL 11/17 sockmap::txmsg test pull-data:FAIL 12/ 9 sockmap::txmsg test pop-data:FAIL ... Pass: 37 Fail: 15 Besides, added a custom errno EDATAINTEGRITY for msg_verify_data, we shall not ignore the error in txmsg_cork case. Fixes: 753fb2ee0934 ("bpf: sockmap, add msg_peek tests to test_sockmap") Fixes: 16edddfe3c5d ("selftests/bpf: test_sockmap, check test failure") Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Link: https://lore.kernel.org/r/20241012203731.1248619-2-zijianzhang@bytedance.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09selftests/resctrl: Protect against array overrun during iMC config parsingReinette Chatre
[ Upstream commit 48ed4e799e8fbebae838dca404a8527763d41191 ] The MBM and MBA tests need to discover the event and umask with which to configure the performance event used to measure read memory bandwidth. This is done by parsing the /sys/bus/event_source/devices/uncore_imc_<imc instance>/events/cas_count_read file for each iMC instance that contains the formatted output: "event=<event>,umask=<umask>" Parsing of cas_count_read contents is done by initializing an array of MAX_TOKENS elements with tokens (deliminated by "=,") from this file. Remove the unnecessary append of a delimiter to the string needing to be parsed. Per the strtok() man page: "delimiter bytes at the start or end of the string are ignored". This has no impact on the token placement within the array. After initialization, the actual event and umask is determined by parsing the tokens directly following the "event" and "umask" tokens respectively. Iterating through the array up to index "i < MAX_TOKENS" but then accessing index "i + 1" risks array overrun during the final iteration. Avoid array overrun by ensuring that the index used within for loop will always be valid. Fixes: 1d3f08687d76 ("selftests/resctrl: Read memory bandwidth from perf IMC counter and from resctrl file system") Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09selftests/resctrl: Fix memory overflow due to unhandled wraparoundReinette Chatre
[ Upstream commit caf02626b2bf164a02c808240f19dbf97aced664 ] alloc_buffer() allocates and initializes (with random data) a buffer of requested size. The initialization starts from the beginning of the allocated buffer and incrementally assigns sizeof(uint64_t) random data to each cache line. The initialization uses the size of the buffer to control the initialization flow, decrementing the amount of buffer needing to be initialized after each iteration. The size of the buffer is stored in an unsigned (size_t) variable s64 and the test "s64 > 0" is used to decide if initialization is complete. The problem is that decrementing the buffer size may wrap around if the buffer size is not divisible by "CL_SIZE / sizeof(uint64_t)" resulting in the "s64 > 0" test being true and memory beyond the buffer "initialized". Use a signed value for the buffer size to support all buffer sizes. Fixes: a2561b12fe39 ("selftests/resctrl: Add built in benchmark") Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09selftests/resctrl: Refactor fill_buf functionsIlpo Järvinen
[ Upstream commit 24be05591fb7a2a3edd639092c045298dd57aeea ] There are unnecessary nested calls in fill_buf.c: - run_fill_buf() calls fill_cache() - alloc_buffer() calls malloc_and_init_memory() Simplify the code flow and remove those unnecessary call levels by moving the called code inside the calling function and remove the duplicated error print. Resolve the difference in run_fill_buf() and fill_cache() parameter name into 'buf_size' which is more descriptive than 'span'. Also, while moving the allocation related code, rename 'p' into 'buf' to be consistent in naming the variables. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Stable-dep-of: caf02626b2bf ("selftests/resctrl: Fix memory overflow due to unhandled wraparound") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09selftests/resctrl: Split fill_buf to allow tests finer-grained controlIlpo Järvinen
[ Upstream commit f8f669699977db503569465b64dc5220ab21bb41 ] MBM, MBA and CMT test cases call run_fill_buf() that in turn calls fill_cache() to alloc and loop indefinitely around the buffer. This binds buffer allocation and running the benchmark into a single bundle so that a selftest cannot allocate a buffer once and reuse it. CAT test doesn't want to loop around the buffer continuously and after rewrite it needs the ability to allocate the buffer separately. Split buffer allocation out of fill_cache() into alloc_buffer(). This change is part of preparation for the new CAT test that allocates a buffer and does multiple passes over the same buffer (but not in an infinite loop). Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Stable-dep-of: caf02626b2bf ("selftests/resctrl: Fix memory overflow due to unhandled wraparound") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09kselftest/arm64: mte: fix printf type warnings about longsAndre Przywara
[ Upstream commit 96dddb7b9406259baace9a1831e8da155311be6f ] When checking MTE tags, we print some diagnostic messages when the tests fail. Some variables uses there are "longs", however we only use "%x" for the format specifier. Update the format specifiers to "%lx", to match the variable types they are supposed to print. Fixes: f3b2a26ca78d ("kselftest/arm64: Verify mte tag inclusion via prctl") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240816153251.2833702-9-andre.przywara@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09kselftest/arm64: mte: fix printf type warnings about __u64Andre Przywara
[ Upstream commit 7e893dc81de3e342156389ea0b83ec7d07f25281 ] When printing the signal context's PC, we use a "%lx" format specifier, which matches the common userland (glibc's) definition of uint64_t as an "unsigned long". However the structure in question is defined in a kernel uapi header, which uses a self defined __u64 type, and the arm64 kernel headers define this using "int-ll64.h", so it becomes an "unsigned long long". This mismatch leads to the usual compiler warning. The common fix would be to use "PRIx64", but because this is defined by the userland's toolchain libc headers, it wouldn't match as well. Since we know the exact type of __u64, just use "%llx" here instead, to silence this warning. This also fixes a more severe typo: "$lx" is not a valid format specifier. Fixes: 191e678bdc9b ("kselftest/arm64: Log unexpected asynchronous MTE faults") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240816153251.2833702-7-andre.przywara@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09bpf: support non-r10 register spill/fill to/from stack in precision trackingAndrii Nakryiko
[ Upstream commit 41f6f64e6999a837048b1bd13a2f8742964eca6b ] Use instruction (jump) history to record instructions that performed register spill/fill to/from stack, regardless if this was done through read-only r10 register, or any other register after copying r10 into it *and* potentially adjusting offset. To make this work reliably, we push extra per-instruction flags into instruction history, encoding stack slot index (spi) and stack frame number in extra 10 bit flags we take away from prev_idx in instruction history. We don't touch idx field for maximum performance, as it's checked most frequently during backtracking. This change removes basically the last remaining practical limitation of precision backtracking logic in BPF verifier. It fixes known deficiencies, but also opens up new opportunities to reduce number of verified states, explored in the subsequent patches. There are only three differences in selftests' BPF object files according to veristat, all in the positive direction (less states). File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF) -------------------------------------- ------------- --------- --------- ------------- ---------- ---------- ------------- test_cls_redirect_dynptr.bpf.linked3.o cls_redirect 2987 2864 -123 (-4.12%) 240 231 -9 (-3.75%) xdp_synproxy_kern.bpf.linked3.o syncookie_tc 82848 82661 -187 (-0.23%) 5107 5073 -34 (-0.67%) xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 85116 84964 -152 (-0.18%) 5162 5130 -32 (-0.62%) Note, I avoided renaming jmp_history to more generic insn_hist to minimize number of lines changed and potential merge conflicts between bpf and bpf-next trees. Notice also cur_hist_entry pointer reset to NULL at the beginning of instruction verification loop. This pointer avoids the problem of relying on last jump history entry's insn_idx to determine whether we already have entry for current instruction or not. It can happen that we added jump history entry because current instruction is_jmp_point(), but also we need to add instruction flags for stack access. In this case, we don't want to entries, so we need to reuse last added entry, if it is present. Relying on insn_idx comparison has the same ambiguity problem as the one that was fixed recently in [0], so we avoid that. [0] https://patchwork.kernel.org/project/netdevbpf/patch/20231110002638.4168352-3-andrii@kernel.org/ Acked-by: Eduard Zingerman <eddyz87@gmail.com> Reported-by: Tao Lyu <tao.lyu@epfl.ch> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231205184248.1502704-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09selftests/watchdog-test: Fix system accidentally reset after watchdog-testLi Zhijian
[ Upstream commit dc1308bee1ed03b4d698d77c8bd670d399dcd04d ] When running watchdog-test with 'make run_tests', the watchdog-test will be terminated by a timeout signal(SIGTERM) due to the test timemout. And then, a system reboot would happen due to watchdog not stop. see the dmesg as below: ``` [ 1367.185172] watchdog: watchdog0: watchdog did not stop! ``` Fix it by registering more signals(including SIGTERM) in watchdog-test, where its signal handler will stop the watchdog. After that # timeout 1 ./watchdog-test Watchdog Ticking Away! . Stopping watchdog ticks... Link: https://lore.kernel.org/all/20241029031324.482800-1-lizhijian@fujitsu.com/ Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-17selftests/bpf: Verify that sync_linked_regs preserves subreg_defEduard Zingerman
[ Upstream commit a41b3828ec056a631ad22413d4560017fed5c3bd ] This test was added because of a bug in verifier.c:sync_linked_regs(), upon range propagation it destroyed subreg_def marks for registers. The test is written in a way to return an upper half of a register that is affected by range propagation and must have it's subreg_def preserved. This gives a return value of 0 and leads to undefined return value if subreg_def mark is not preserved. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240924210844.1758441-2-eddyz87@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-14Revert "selftests/bpf: Implement get_hw_ring_size function to retrieve ↵Pu Lehui
current and max interface size" This reverts commit c8c590f07ad7ffaa6ef11e90b81202212077497b which is commit 90a695c3d31e1c9f0adb8c4c80028ed4ea7ed5ab upstream. Commit c8c590f07ad7 ("selftests/bpf: Implement get_hw_ring_size function to retrieve current and max interface size") will cause the following bpf selftests compilation error in the 6.6 stable branch, and it is not the Stable-dep-of of commit 103c0431c7fb ("selftests/bpf: Drop unneeded error.h includes"). So let's revert commit c8c590f07ad7 to fix this compilation error. ./network_helpers.h:66:43: error: 'struct ethtool_ringparam' declared inside parameter list will not be visible outside of this definition or declaration [-Werror] 66 | int get_hw_ring_size(char *ifname, struct ethtool_ringparam *ring_param); Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-08cxl/port: Fix use-after-free, permit out-of-order decoder shutdownDan Williams
commit 101c268bd2f37e965a5468353e62d154db38838e upstream. In support of investigating an initialization failure report [1], cxl_test was updated to register mock memory-devices after the mock root-port/bus device had been registered. That led to cxl_test crashing with a use-after-free bug with the following signature: cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1 cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1 cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0 1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1 [..] cxld_unregister: cxl decoder14.0: cxl_region_decode_reset: cxl_region region3: mock_decoder_reset: cxl_port port3: decoder3.0 reset 2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1 cxl_endpoint_decoder_release: cxl decoder14.0: [..] cxld_unregister: cxl decoder7.0: 3) cxl_region_decode_reset: cxl_region region3: Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI [..] RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core] [..] Call Trace: <TASK> cxl_region_decode_reset+0x69/0x190 [cxl_core] cxl_region_detach+0xe8/0x210 [cxl_core] cxl_decoder_kill_region+0x27/0x40 [cxl_core] cxld_unregister+0x5d/0x60 [cxl_core] At 1) a region has been established with 2 endpoint decoders (7.0 and 14.0). Those endpoints share a common switch-decoder in the topology (3.0). At teardown, 2), decoder14.0 is the first to be removed and hits the "out of order reset case" in the switch decoder. The effect though is that region3 cleanup is aborted leaving it in-tact and referencing decoder14.0. At 3) the second attempt to teardown region3 trips over the stale decoder14.0 object which has long since been deleted. The fix here is to recognize that the CXL specification places no mandate on in-order shutdown of switch-decoders, the driver enforces in-order allocation, and hardware enforces in-order commit. So, rather than fail and leave objects dangling, always remove them. In support of making cxl_region_decode_reset() always succeed, cxl_region_invalidate_memregion() failures are turned into warnings. Crashing the kernel is ok there since system integrity is at risk if caches cannot be managed around physical address mutation events like CXL region destruction. A new device_for_each_child_reverse_from() is added to cleanup port->commit_end after all dependent decoders have been disabled. In other words if decoders are allocated 0->1->2 and disabled 1->2->0 then port->commit_end only decrements from 2 after 2 has been disabled, and it decrements all the way to zero since 1 was disabled previously. Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1] Cc: stable@vger.kernel.org Fixes: 176baefb2eb5 ("cxl/hdm: Commit decoder state to hardware") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Alison Schofield <alison.schofield@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://patch.msgid.link/172964782781.81806.17902885593105284330.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-08Revert "selftests/mm: replace atomic_bool with pthread_barrier_t"Edward Liaw
commit 3673167a3a07f25b3f06754d69f406edea65543a upstream. This reverts commit e61ef21e27e8deed8c474e9f47f4aa7bc37e138c. uffd_poll_thread may be called by other tests that do not initialize the pthread_barrier, so this approach is not correct. This will revert to using atomic_bool instead. Link: https://lkml.kernel.org/r/20241018171734.2315053-3-edliaw@google.com Fixes: e61ef21e27e8 ("selftests/mm: replace atomic_bool with pthread_barrier_t") Signed-off-by: Edward Liaw <edliaw@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-08Revert "selftests/mm: fix deadlock for fork after pthread_create on ARM"Edward Liaw
commit 5bb1f4c9340e01003b00b94d539eadb0da88f48e upstream. Patch series "selftests/mm: revert pthread_barrier change" On Android arm, pthread_create followed by a fork caused a deadlock in the case where the fork required work to be completed by the created thread. The previous patches incorrectly assumed that the parent would always initialize the pthread_barrier for the child thread. This reverts the change and replaces the fix for wp-fork-with-event with the original use of atomic_bool. This patch (of 3): This reverts commit e142cc87ac4ec618f2ccf5f68aedcd6e28a59d9d. fork_event_consumer may be called by other tests that do not initialize the pthread_barrier, so this approach is not correct. The subsequent patch will revert to using atomic_bool instead. Link: https://lkml.kernel.org/r/20241018171734.2315053-1-edliaw@google.com Link: https://lkml.kernel.org/r/20241018171734.2315053-2-edliaw@google.com Fixes: e142cc87ac4e ("fix deadlock for fork after pthread_create on ARM") Signed-off-by: Edward Liaw <edliaw@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-08selftests/bpf: Add bpf_percpu_obj_{new,drop}() macro in bpf_experimental.hYonghong Song
[ Upstream commit 968c76cb3dc6cc86e8099ecaa5c30dc0d4738a30 ] The new macro bpf_percpu_obj_{new/drop}() is very similar to bpf_obj_{new,drop}() as they both take a type as the argument. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230827152805.1999417-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> Stable-dep-of: aa30eb3260b2 ("bpf: Force checkpoint when jmp history is too long") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01bpf: Simplify checking size of helper accessesAndrei Matei
[ Upstream commit 8a021e7fa10576eeb3938328f39bbf98fe7d4715 ] This patch simplifies the verification of size arguments associated to pointer arguments to helpers and kfuncs. Many helpers take a pointer argument followed by the size of the memory access performed to be performed through that pointer. Before this patch, the handling of the size argument in check_mem_size_reg() was confusing and wasteful: if the size register's lower bound was 0, then the verification was done twice: once considering the size of the access to be the lower-bound of the respective argument, and once considering the upper bound (even if the two are the same). The upper bound checking is a super-set of the lower-bound checking(*), except: the only point of the lower-bound check is to handle the case where zero-sized-accesses are explicitly not allowed and the lower-bound is zero. This static condition is now checked explicitly, replacing a much more complex, expensive and confusing verification call to check_helper_mem_access(). Error messages change in this patch. Before, messages about illegal zero-size accesses depended on the type of the pointer and on other conditions, and sometimes the message was plain wrong: in some tests that changed you'll see that the old message was something like "R1 min value is outside of the allowed memory range", where R1 is the pointer register; the error was wrongly claiming that the pointer was bad instead of the size being bad. Other times the information that the size came for a register with a possible range of values was wrong, and the error presented the size as a fixed zero. Now the errors refer to the right register. However, the old error messages did contain useful information about the pointer register which is now lost; recovering this information was deemed not important enough. (*) Besides standing to reason that the checks for a bigger size access are a super-set of the checks for a smaller size access, I have also mechanically verified this by reading the code for all types of pointers. I could convince myself that it's true for all but PTR_TO_BTF_ID (check_ptr_to_btf_access). There, simply looking line-by-line does not immediately prove what we want. If anyone has any qualms, let me know. Signed-off-by: Andrei Matei <andreimatei1@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20231221232225.568730-2-andreimatei1@gmail.com Stable-dep-of: 8ea607330a39 ("bpf: Fix overloading of MEM_UNINIT's meaning") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01tracing/probes: Support $argN in return probe (kprobe and fprobe)Masami Hiramatsu (Google)
[ Upstream commit 25f00e40ce7953db197af3a59233711d154c9d80 ] Support accessing $argN in the return probe events. This will help users to record entry data in function return (exit) event for simplfing the function entry/exit information in one event, and record the result values (e.g. allocated object/initialized object) at function exit. For example, if we have a function `int init_foo(struct foo *obj, int param)` sometimes we want to check how `obj` is initialized. In such case, we can define a new return event like below; # echo 'r init_foo retval=$retval param=$arg2 field1=+0($arg1)' >> kprobe_events Thus it records the function parameter `param` and its result `obj->field1` (the dereference will be done in the function exit timing) value at once. This also support fprobe, BTF args and'$arg*'. So if CONFIG_DEBUG_INFO_BTF is enabled, we can trace both function parameters and the return value by following command. # echo 'f target_function%return $arg* $retval' >> dynamic_events Link: https://lore.kernel.org/all/170952365552.229804.224112990211602895.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Stable-dep-of: 373b9338c972 ("uprobe: avoid out-of-bounds memory access of fetching args") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01selftests/bpf: Fix cross-compiling urandom_readTony Ambardar
[ Upstream commit fd526e121c4d6f71aed82d21a8b8277b03e60b43 ] Linking of urandom_read and liburandom_read.so prefers LLVM's 'ld.lld' but falls back to using 'ld' if unsupported. However, this fallback discards any existing makefile macro for LD and can break cross-compilation. Fix by changing the fallback to use the target linker $(LD), passed via '-fuse-ld=' using an absolute path rather than a linker "flavour". Fixes: 08c79c9cd67f ("selftests/bpf: Don't force lld on non-x86 architectures") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20241009040720.635260-1-tony.ambardar@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01selftests/bpf: fix perf_event link info name_len assertionTyrone Wu
[ Upstream commit 4538a38f654a1c292fe489a9b66179262bfed088 ] Fix `name_len` field assertions in `bpf_link_info.perf_event` for kprobe/uprobe/tracepoint to validate correct name size instead of 0. Fixes: 23cf7aa539dc ("selftests/bpf: Add selftest for fill_link_info") Signed-off-by: Tyrone Wu <wudevelops@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/r/20241008164312.46269-2-wudevelops@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01selftests/bpf: Add cookies check for perf_event fill_link_info testJiri Olsa
[ Upstream commit d74179708473c649c653f1db280e29875a532e99 ] Now that we get cookies for perf_event probes, adding tests for cookie for kprobe/uprobe/tracepoint. The perf_event test needs to be added completely and is coming in following change. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240119110505.400573-6-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Stable-dep-of: 4538a38f654a ("selftests/bpf: fix perf_event link info name_len assertion") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01selftests/bpf: Use bpf_link__destroy in fill_link_info testsJiri Olsa
[ Upstream commit 1703612885723869064f18e8816c6f3f87987748 ] The fill_link_info test keeps skeleton open and just creates various links. We are wrongly calling bpf_link__detach after each test to close them, we need to call bpf_link__destroy. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/bpf/20231125193130.834322-5-jolsa@kernel.org Stable-dep-of: 4538a38f654a ("selftests/bpf: fix perf_event link info name_len assertion") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-22selftests: mptcp: remove duplicated variablesMatthieu Baerts (NGI0)
A few week ago, there were some backport issues in MPTCP selftests, because some patches have been applied twice, but with versions handling conflicts differently [1]. Patches fixing these issues have been sent [2] and applied, but it looks like quilt was still confused with the removal of some patches, and commit a417ef47a665 ("selftests: mptcp: join: validate event numbers") duplicated some variables, not present in the original patch [3]. Anyway, Bash was complaining, but that was not causing any tests to fail. Also, that's easy to fix by simply removing the duplicated ones. Link: https://lore.kernel.org/fc21db4a-508d-41db-aa45-e3bc06d18ce7@kernel.org [1] Link: https://lore.kernel.org/20240905144306.1192409-5-matttbe@kernel.org [2] Link: https://lore.kernel.org/20240905144306.1192409-7-matttbe@kernel.org [3] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-22selftests: mptcp: join: test for prohibited MPC to port-based endpPaolo Abeni
commit 5afca7e996c42aed1b4a42d4712817601ba42aff upstream. Explicitly verify that MPC connection attempts towards a port-based signal endpoint fail with a reset. Note that this new test is a bit different from the other ones, not using 'run_tests'. It is then needed to add the capture capability, and the picking the right port which have been extracted into three new helpers. The info about the capture can also be printed from a single point, which simplifies the exit paths in do_transfer(). The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port") Cc: stable@vger.kernel.org Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241014-net-mptcp-mpc-port-endp-v2-2-7faea8e6b6ae@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ Conflicts in mptcp_join.sh, because commit 0bd962dd86b2 ("selftests: mptcp: join: check CURRESTAB counters"), and commit 9e6a39ecb9a1 ("selftests: mptcp: export TEST_COUNTER variable") are linked to new features, not available in this version. Resolving the conflicts is easy, simply adding the new helpers before do_transfer(), and rename MPTCP_LIB_TEST_COUNTER to TEST_COUNT that was used before. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-22selftests: mptcp: join: change capture/checksum as boolGeliang Tang
commit 8c6f6b4bb53a904f922dfb90d566391d3feee32c upstream. To maintain consistency with other scripts, this patch changes vars 'capture' and 'checksum' as bool vars in mptcp_join. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-7-b6c8a10396bd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 5afca7e996c4 ("selftests: mptcp: join: test for prohibited MPC to port-based endp") Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-22selftest: hid: add the missing tests directoryYun Lu
commit fe05c40ca9c18cfdb003f639a30fc78a7ab49519 upstream. Commit 160c826b4dd0 ("selftest: hid: add missing run-hid-tools-tests.sh") has added the run-hid-tools-tests.sh script for it to be installed, but I forgot to add the tests directory together. If running the test case without the tests directory, will results in the following error message: make -C tools/testing/selftests/ TARGETS=hid install \ INSTALL_PATH=$KSFT_INSTALL_PATH cd $KSFT_INSTALL_PATH ./run_kselftest.sh -t hid:hid-core.sh /usr/lib/python3.11/site-packages/_pytest/config/__init__.py:331: PluggyTeardownRaisedWarning: A plugin raised an exception during an old-style hookwrapper teardown. Plugin: helpconfig, Hook: pytest_cmdline_parse UsageError: usage: __main__.py [options] [file_or_dir] [file_or_dir] [...] __main__.py: error: unrecognized arguments: --udevd inifile: None rootdir: /root/linux/kselftest_install/hid In fact, the run-hid-tools-tests.sh script uses the scripts in the tests directory to run tests. The tests directory also needs to be added to be installed. Fixes: ffb85d5c9e80 ("selftests: hid: import hid-tools hid-core tests") Cc: stable@vger.kernel.org Signed-off-by: Yun Lu <luyun@kylinos.cn> Acked-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-22selftests/mm: fix deadlock for fork after pthread_create on ARMEdward Liaw
commit e142cc87ac4ec618f2ccf5f68aedcd6e28a59d9d upstream. On Android with arm, there is some synchronization needed to avoid a deadlock when forking after pthread_create. Link: https://lkml.kernel.org/r/20241003211716.371786-3-edliaw@google.com Fixes: cff294582798 ("selftests/mm: extend and rename uffd pagemap test") Signed-off-by: Edward Liaw <edliaw@google.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-22selftests/mm: replace atomic_bool with pthread_barrier_tEdward Liaw
commit e61ef21e27e8deed8c474e9f47f4aa7bc37e138c upstream. Patch series "selftests/mm: fix deadlock after pthread_create". On Android arm, pthread_create followed by a fork caused a deadlock in the case where the fork required work to be completed by the created thread. Update the synchronization primitive to use pthread_barrier instead of atomic_bool. Apply the same fix to the wp-fork-with-event test. This patch (of 2): Swap synchronization primitive with pthread_barrier, so that stdatomic.h does not need to be included. The synchronization is needed on Android ARM64; we see a deadlock with pthread_create when the parent thread races forward before the child has a chance to start doing work. Link: https://lkml.kernel.org/r/20241003211716.371786-1-edliaw@google.com Link: https://lkml.kernel.org/r/20241003211716.371786-2-edliaw@google.com Fixes: cff294582798 ("selftests/mm: extend and rename uffd pagemap test") Signed-off-by: Edward Liaw <edliaw@google.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-17selftests/rseq: Fix mm_cid test failureMathieu Desnoyers
commit a0cc649353bb726d4aa0db60dce467432197b746 upstream. Adapt the rseq.c/rseq.h code to follow GNU C library changes introduced by: glibc commit 2e456ccf0c34 ("Linux: Make __rseq_size useful for feature detection (bug 31965)") Without this fix, rseq selftests for mm_cid fail: ./run_param_test.sh Default parameters Running test spinlock Running compare-twice test spinlock Running mm_cid test spinlock Error: cpu id getter unavailable Fixes: 18c2355838e7 ("selftests/rseq: Implement rseq mm_cid field support") Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> CC: Boqun Feng <boqun.feng@gmail.com> CC: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> CC: Carlos O'Donell <carlos@redhat.com> CC: Florian Weimer <fweimer@redhat.com> CC: linux-kselftest@vger.kernel.org CC: stable@vger.kernel.org Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-17selftests/mm: fix incorrect buffer->mirror size in hmm2 double_map testDonet Tom
commit 76503e1fa1a53ef041a120825d5ce81c7fe7bdd7 upstream. The hmm2 double_map test was failing due to an incorrect buffer->mirror size. The buffer->mirror size was 6, while buffer->ptr size was 6 * PAGE_SIZE. The test failed because the kernel's copy_to_user function was attempting to copy a 6 * PAGE_SIZE buffer to buffer->mirror. Since the size of buffer->mirror was incorrect, copy_to_user failed. This patch corrects the buffer->mirror size to 6 * PAGE_SIZE. Test Result without this patch ============================== # RUN hmm2.hmm2_device_private.double_map ... # hmm-tests.c:1680:double_map:Expected ret (-14) == 0 (0) # double_map: Test terminated by assertion # FAIL hmm2.hmm2_device_private.double_map not ok 53 hmm2.hmm2_device_private.double_map Test Result with this patch =========================== # RUN hmm2.hmm2_device_private.double_map ... # OK hmm2.hmm2_device_private.double_map ok 53 hmm2.hmm2_device_private.double_map Link: https://lkml.kernel.org/r/20240927050752.51066-1-donettom@linux.ibm.com Fixes: fee9f6d1b8df ("mm/hmm/test: add selftests for HMM") Signed-off-by: Donet Tom <donettom@linux.ibm.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Brown <broonie@kernel.org> Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com> Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-17selftests: net: no_forwarding: fix VID for $swp2 in one_bridge_two_pvids() testKacper Ludwinski
[ Upstream commit 9f49d14ec41ce7be647028d7d34dea727af55272 ] Currently, the second bridge command overwrites the first one. Fix this by adding this VID to the interface behind $swp2. The one_bridge_two_pvids() test intends to check that there is no leakage of traffic between bridge ports which have a single VLAN - the PVID VLAN. Because of a typo, port $swp1 is configured with a PVID twice (second command overwrites first), and $swp2 isn't configured at all (and since the bridge vlan_default_pvid property is set to 0, this port will not have a PVID at all, so it will drop all untagged and priority-tagged traffic). So, instead of testing the configuration that was intended, we are testing a different one, where one port has PVID 2 and the other has no PVID. This incorrect version of the test should also pass, but is ineffective for its purpose, so fix the typo. This typo has an impact on results of the test, potentially leading to wrong conclusions regarding the functionality of a network device. The tests results: TEST: Switch ports in VLAN-aware bridge with different PVIDs: Unicast non-IP untagged [ OK ] Multicast non-IP untagged [ OK ] Broadcast non-IP untagged [ OK ] Unicast IPv4 untagged [ OK ] Multicast IPv4 untagged [ OK ] Unicast IPv6 untagged [ OK ] Multicast IPv6 untagged [ OK ] Unicast non-IP VID 1 [ OK ] Multicast non-IP VID 1 [ OK ] Broadcast non-IP VID 1 [ OK ] Unicast IPv4 VID 1 [ OK ] Multicast IPv4 VID 1 [ OK ] Unicast IPv6 VID 1 [ OK ] Multicast IPv6 VID 1 [ OK ] Unicast non-IP VID 4094 [ OK ] Multicast non-IP VID 4094 [ OK ] Broadcast non-IP VID 4094 [ OK ] Unicast IPv4 VID 4094 [ OK ] Multicast IPv4 VID 4094 [ OK ] Unicast IPv6 VID 4094 [ OK ] Multicast IPv6 VID 4094 [ OK ] Fixes: 476a4f05d9b8 ("selftests: forwarding: add a no_forwarding.sh test") Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Kacper Ludwinski <kac.ludwinski@icloud.com> Link: https://patch.msgid.link/20241002051016.849-1-kac.ludwinski@icloud.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17ktest.pl: Avoid false positives with grub2 skip regexDaniel Jordan
[ Upstream commit 2351e8c65404aabc433300b6bf90c7a37e8bbc4d ] Some distros have grub2 config files with the lines if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi which match the skip regex defined for grub2 in get_grub_index(): $skip = '^\s*menuentry'; These false positives cause the grub number to be higher than it should be, and the wrong kernel can end up booting. Grub documents the menuentry command with whitespace between it and the title, so make the skip regex reflect this. Link: https://lore.kernel.org/20240904175530.84175-1-daniel.m.jordan@oracle.com Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: John 'Warthog9' Hawley (Tenstorrent) <warthog9@eaglescrag.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17selftests/bpf: Fix ARG_PTR_TO_LONG {half-,}uninitialized testDaniel Borkmann
[ Upstream commit b8e188f023e07a733b47d5865311ade51878fe40 ] The assumption of 'in privileged mode reads from uninitialized stack locations are permitted' is not quite correct since the verifier was probing for read access rather than write access. Both tests need to be annotated as __success for privileged and unprivileged. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240913191754.13290-6-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17selftests: Introduce Makefile variable to list shared bash scriptsBenjamin Poirier
[ Upstream commit 2a0683be5b4c9829e8335e494a21d1148e832822 ] Some tests written in bash source other files in a parent directory. For example, drivers/net/bonding/dev_addr_lists.sh sources net/forwarding/lib.sh. If a subset of tests is exported and run outside the source tree (for example by using `make -C tools/testing/selftests gen_tar TARGETS="drivers/net/bonding"`), these other files must be made available as well. Commit ae108c48b5d2 ("selftests: net: Fix cross-tree inclusion of scripts") addressed this problem by symlinking and copying the sourced files but this only works for direct dependencies. Commit 25ae948b4478 ("selftests/net: add lib.sh") changed net/forwarding/lib.sh to source net/lib.sh. As a result, that latter file must be included as well when the former is exported. This was not handled and was reverted in commit 2114e83381d3 ("selftests: forwarding: Avoid failures to source net/lib.sh"). In order to allow reinstating the inclusion of net/lib.sh from net/forwarding/lib.sh, add a mechanism to list dependent files in a new Makefile variable and export them. This allows sourcing those files using the same expression whether tests are run in-tree or exported. Dependencies are not resolved recursively so transitive dependencies must be listed in TEST_INCLUDES. For example, if net/forwarding/lib.sh sources net/lib.sh; the Makefile related to a test that sources net/forwarding/lib.sh from a parent directory must list: TEST_INCLUDES := \ ../../../net/forwarding/lib.sh \ ../../../net/lib.sh v2: Fix rst syntax in Documentation/dev-tools/kselftest.rst (Jakub Kicinski) v1 (from RFC): * changed TEST_INCLUDES to take relative paths, like other TEST_* variables (Vladimir Oltean) * preserved common "$(MAKE) OUTPUT=... -C ... target" ordering in Makefile (Petr Machata) Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17selftests: net: Remove executable bits from library scriptsBenjamin Poirier
[ Upstream commit 9d851dd4dab63e95c1911a2fa847796d1ec5d58d ] setup_loopback.sh and net_helper.sh are meant to be sourced from other scripts, not executed directly. Therefore, remove the executable bits from those files' permissions. This change is similar to commit 49078c1b80b6 ("selftests: forwarding: Remove executable bits from lib.sh") Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test") Fixes: 3bdd9fd29cb0 ("selftests/net: synchronize udpgro tests' tx and rx connection") Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Link: https://lore.kernel.org/r/20240131140848.360618-4-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-10selftests: vDSO: fix vdso_config for s390Heiko Carstens
[ Upstream commit a6e23fb8d3c0e3904da70beaf5d7e840a983c97f ] Running vdso_test_correctness on s390x (aka s390 64 bit) emits a warning: Warning: failed to find clock_gettime64 in vDSO This is caused by the "#elif defined (__s390__)" check in vdso_config.h which the defines VDSO_32BIT. If __s390x__ is defined also __s390__ is defined. Therefore the correct check must make sure that only __s390__ is defined. Therefore add the missing !defined(__s390x__). Also use common __s390x__ define instead of __s390X__. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Fixes: 693f5ca08ca0 ("kselftest: Extend vDSO selftest") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-10selftests: vDSO: fix ELF hash table entry size for s390xJens Remus
[ Upstream commit 14be4e6f35221c4731b004553ecf7cbc6dc1d2d8 ] The vDSO self tests fail on s390x for a vDSO linked with the GNU linker ld as follows: # ./vdso_test_gettimeofday Floating point exception (core dumped) On s390x the ELF hash table entries are 64 bits instead of 32 bits in size (see Glibc sysdeps/unix/sysv/linux/s390/bits/elfclass.h). Fixes: 40723419f407 ("kselftest: Enable vDSO test on non x86 platforms") Reported-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-10selftests/mm: fix charge_reserved_hugetlb.sh testDavid Hildenbrand
[ Upstream commit c41a701d18efe6b8aa402efab16edbaba50c9548 ] Currently, running the charge_reserved_hugetlb.sh selftest we can sometimes observe something like: $ ./charge_reserved_hugetlb.sh -cgroup-v2 ... write_result is 0 After write: hugetlb_usage=0 reserved_usage=10485760 killing write_to_hugetlbfs Received 2. Deleting the memory Detach failure: Invalid argument umount: /mnt/huge: target is busy. Both cases are issues in the test. While the unmount error seems to be racy, it will make the test fail: $ ./run_vmtests.sh -t hugetlb ... # [FAIL] not ok 10 charge_reserved_hugetlb.sh -cgroup-v2 # exit=32 The issue is that we are not waiting for the write_to_hugetlbfs process to quit. So it might still have a hugetlbfs file open, about which umount is not happy. Fix that by making "killall" wait for the process to quit. The other error ("Detach failure: Invalid argument") does not seem to result in a test error, but is misleading. Turns out write_to_hugetlbfs.c unconditionally tries to cleanup using shmdt(), even when we only mmap()'ed a hugetlb file. Even worse, shmaddr is never even set for the SHM case. Fix that as well. With this change it seems to work as expected. Link: https://lkml.kernel.org/r/20240821123115.2068812-1-david@redhat.com Fixes: 29750f71a9b4 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Mario Casquero <mcasquer@redhat.com> Reviewed-by: Mina Almasry <almasrymina@google.com> Tested-by: Mario Casquero <mcasquer@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-10selftests: vDSO: fix vDSO symbols lookup for powerpc64Christophe Leroy
[ Upstream commit ba83b3239e657469709d15dcea5f9b65bf9dbf34 ] On powerpc64, following tests fail locating vDSO functions: ~ # ./vdso_test_abi TAP version 13 1..16 # [vDSO kselftest] VDSO_VERSION: LINUX_2.6.15 # Couldn't find __kernel_gettimeofday ok 1 # SKIP __kernel_gettimeofday # clock_id: CLOCK_REALTIME # Couldn't find __kernel_clock_gettime ok 2 # SKIP __kernel_clock_gettime CLOCK_REALTIME # Couldn't find __kernel_clock_getres ok 3 # SKIP __kernel_clock_getres CLOCK_REALTIME ... # Couldn't find __kernel_time ok 16 # SKIP __kernel_time # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:16 error:0 ~ # ./vdso_test_getrandom __kernel_getrandom is missing! ~ # ./vdso_test_gettimeofday Could not find __kernel_gettimeofday ~ # ./vdso_test_getcpu Could not find __kernel_getcpu On powerpc64, as shown below by readelf, vDSO functions symbols have type NOTYPE, so also accept that type when looking for symbols. $ powerpc64-linux-gnu-readelf -a arch/powerpc/kernel/vdso/vdso64.so.dbg ELF Header: Magic: 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00 Class: ELF64 Data: 2's complement, big endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: DYN (Shared object file) Machine: PowerPC64 Version: 0x1 ... Symbol table '.dynsym' contains 12 entries: Num: Value Size Type Bind Vis Ndx Name 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND 1: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 2: 00000000000005f0 36 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 3: 0000000000000578 68 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 4: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15 5: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 6: 0000000000000614 172 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 7: 00000000000006f0 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 8: 000000000000047c 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 9: 0000000000000454 12 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 10: 00000000000004d0 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 11: 00000000000005bc 52 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 Symbol table '.symtab' contains 56 entries: Num: Value Size Type Bind Vis Ndx Name ... 45: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15 46: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __kernel_getcpu 47: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __kernel_clock_getres 48: 00000000000005f0 36 NOTYPE GLOBAL DEFAULT 8 __kernel_get_tbfreq 49: 000000000000047c 84 NOTYPE GLOBAL DEFAULT 8 __kernel_gettimeofday 50: 0000000000000614 172 NOTYPE GLOBAL DEFAULT 8 __kernel_sync_dicache 51: 00000000000006f0 84 NOTYPE GLOBAL DEFAULT 8 __kernel_getrandom 52: 0000000000000454 12 NOTYPE GLOBAL DEFAULT 8 __kernel_sigtram[...] 53: 0000000000000578 68 NOTYPE GLOBAL DEFAULT 8 __kernel_time 54: 00000000000004d0 84 NOTYPE GLOBAL DEFAULT 8 __kernel_clock_g[...] 55: 00000000000005bc 52 NOTYPE GLOBAL DEFAULT 8 __kernel_get_sys[...] Fixes: 98eedc3a9dbf ("Document the vDSO and add a reference parser") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-10selftests: vDSO: fix vdso_config for powerpcChristophe Leroy
[ Upstream commit 7d297c419b08eafa69ce27243ee9bbecab4fcaa4 ] Running vdso_test_correctness on powerpc64 gives the following warning: ~ # ./vdso_test_correctness Warning: failed to find clock_gettime64 in vDSO This is because vdso_test_correctness was built with VDSO_32BIT defined. __powerpc__ macro is defined on both powerpc32 and powerpc64 so __powerpc64__ needs to be checked first in vdso_config.h Fixes: 693f5ca08ca0 ("kselftest: Extend vDSO selftest") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-10selftests: vDSO: fix vDSO name for powerpcChristophe Leroy
[ Upstream commit 59eb856c3ed9b3552befd240c0c339f22eed3fa1 ] Following error occurs when running vdso_test_correctness on powerpc: ~ # ./vdso_test_correctness [WARN] failed to find vDSO [SKIP] No vDSO, so skipping clock_gettime() tests [SKIP] No vDSO, so skipping clock_gettime64() tests [RUN] Testing getcpu... [OK] CPU 0: syscall: cpu 0, node 0 On powerpc, vDSO is neither called linux-vdso.so.1 nor linux-gate.so.1 but linux-vdso32.so.1 or linux-vdso64.so.1. Also search those two names before giving up. Fixes: c7e5789b24d3 ("kselftest: Move test_vdso to the vDSO test suite") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 10:33:09 +0000