| Age | Commit message (Collapse) | Author |
|---|
|
Replace the switch statement on vm->mode in x86's vcpu_init_sregs()'s with
a simple assert that the VM has a 48-bit virtual address space. A switch
statement is both overkill and misleading, as the existing code incorrectly
implies that VMs with LA57 would need different to configuration for the
LDT, TSS, and flat segments. In all likelihood, the only difference that
would be needed for selftests is CR4.LA57 itself.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Allocate the GDT during creation of non-barebones VMs instead of waiting
until the first vCPU is created, as the whole point of non-barebones VMs
is to be able to run vCPUs, i.e. the GDT is going to get allocated no
matter what.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Map x86's exception handlers at VM creation, not vCPU setup, as the
mapping is per-VM, i.e. doesn't need to be (re)done for every vCPU.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Initialize the IDT and exception handlers for all non-barebones VMs and
vCPUs on x86. Forcing tests to manually configure the IDT just to save
8KiB of memory is a terrible tradeoff, and also leads to weird tests
(multiple tests have deliberately relied on shutdown to indicate success),
and hard-to-debug failures, e.g. instead of a precise unexpected exception
failure, tests see only shutdown.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rename vcpu_setup() to be more descriptive and precise, there is a whole
lot of "setup" that is done for a vCPU that isn't in said helper.
No functional change intended.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move x86's various descriptor table helpers in processor.c up above
kvm_arch_vm_post_create() and vcpu_setup() so that the helpers can be
made static and invoked from the aforementioned functions.
No functional change intended.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Explicitly clobber the guest IDT in the "delete memslot" test, which
expects the deleted memslot to result in either a KVM emulation error, or
a triple fault shutdown. A future change to the core selftests library
will configuring the guest IDT and exception handlers by default, i.e.
will install a guest #PF handler and put the guest into an infinite #NPF
loop (the guest hits a !PRESENT SPTE when trying to vector a #PF, and KVM
reinjects the #PF without fixing the #NPF, because there is no memslot).
Note, it's not clear whether or not KVM's behavior is reasonable in this
case, e.g. arguably KVM should try (and fail) to emulate in response to
the #NPF. But barring a goofy/broken userspace, this scenario will likely
never happen in practice. Punt the KVM investigation to the future.
Link: https://lore.kernel.org/r/20240314232637.2538648-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rework platform_info_test to actually handle and verify the expected #GP
on RDMSR when the associated KVM capability is disabled. Currently, the
test _deliberately_ doesn't handle the #GP, and instead lets it escalated
to a triple fault shutdown.
In addition to verifying that KVM generates the correct fault, handling
the #GP will be necessary (without even more shenanigans) when a future
change to the core KVM selftests library configures the IDT and exception
handlers by default (the test subtly relies on the IDT limit being '0').
Link: https://lore.kernel.org/r/20240314232637.2538648-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
As a first step toward gracefully handling the expected #GP on RDMSR in
platform_info_test, move the test's assert on the non-faulting RDMSR
result into the guest itself. This will allow using a unified flow for
the host userspace side of things.
Link: https://lore.kernel.org/r/20240314232637.2538648-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Fix an off-by-one bug in the initialization of the GDT limit, which as
defined in the SDM is inclusive, not exclusive.
Note, vcpu_init_descriptor_tables() gets the limit correct, it's only
vcpu_setup() that is broken, i.e. only tests that _don't_ invoke
vcpu_init_descriptor_tables() can have problems. And the fact that KVM
effectively initializes the GDT twice will be cleaned up in the near
future.
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
[sean: rewrite changelog]
Link: https://lore.kernel.org/r/20240314232637.2538648-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that kvm_vm_arch exists, move the GDT, IDT, and TSS fields to x86's
implementation, as the structures are firmly x86-only.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move the base types unique to KVM selftests out of kvm_util.h and into a
new header, kvm_util_types.h. This will allow kvm_util_arch.h, i.e. core
arch headers, to reference common types, e.g. vm_vaddr_t and vm_paddr_t.
No functional change intended.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Effectively revert the movement of code from kvm_util.h => kvm_util_base.h,
as the TL;DR of the justification for the move was to avoid #idefs and/or
circular dependencies between what ended up being ucall_common.h and what
was (and now again, is), kvm_util.h.
But avoiding #ifdef and circular includes is trivial: don't do that. The
cost of removing kvm_util_base.h is a few extra includes of ucall_common.h,
but that cost is practically nothing. On the other hand, having a "base"
version of a header that is really just the header itself is confusing,
and makes it weird/hard to choose names for headers that actually are
"base" headers, e.g. to hold core KVM selftests typedefs.
For all intents and purposes, this reverts commit
7d9a662ed9f0403e7b94940dceb81552b8edb931.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Override vcpu_arch_put_guest() to randomly force emulation on supported
accesses. Force emulation of LOCK CMPXCHG as well as a regular MOV to
stress KVM's emulation of atomic accesses, which has a unique path in
KVM's emulator.
Arbitrarily give all the decisions 50/50 odds; absent much, much more
sophisticated infrastructure for generating random numbers, it's highly
unlikely that doing more than a coin flip with affect selftests' ability
to find KVM bugs.
This is effectively a regression test for commit 910c57dfa4d1 ("KVM: x86:
Mark target gfn of emulated atomic instruction as dirty").
Link: https://lore.kernel.org/r/20240314185459.2439072-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Introduce a macro, vcpu_arch_put_guest(), for "putting" values to memory
from guest code in "interesting" situations, e.g. when writing memory that
is being dirty logged. Structure the macro so that arch code can provide
a custom implementation, e.g. x86 will use the macro to force emulation of
the access.
Use the helper in dirty_log_test, which is of particular interest (see
above), and in xen_shinfo_test, which isn't all that interesting, but
provides a second usage of the macro with a different size operand
(uint8_t versus uint64_t), i.e. to help verify that the macro works for
more than just 64-bit values.
Use "put" as the verb to align with the kernel's {get,put}_user()
terminology.
Link: https://lore.kernel.org/r/20240314185459.2439072-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a global snapshot of kvm_is_forced_emulation_enabled() and sync it to
all VMs by default so that core library code can force emulation, e.g. to
allow for easier testing of the intersections between emulation and other
features in KVM.
Link: https://lore.kernel.org/r/20240314185459.2439072-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move memstress' random bool logic into common code to avoid reinventing
the wheel for basic yes/no decisions. Provide an outer wrapper to handle
the basic/common case of just wanting a 50/50 chance of something
happening.
Link: https://lore.kernel.org/r/20240314185459.2439072-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a global guest_random_state instance, i.e. a pseudo-RNG, so that an
RNG is available for *all* tests. This will allow randomizing behavior
in core library code, e.g. x86 will utilize the pRNG to conditionally
force emulation of writes from within common guest code.
To allow for deterministic runs, and to be compatible with existing tests,
allow tests to override the seed used to initialize the pRNG.
Note, the seed *must* be overwritten before a VM is created in order for
the seed to take effect, though it's perfectly fine for a test to
initialize multiple VMs with different seeds.
And as evidenced by memstress_guest_code(), it's also a-ok to instantiate
more RNGs using the global seed (or a modified version of it). The goal
of the global RNG is purely to ensure that _a_ source of random numbers is
available, it doesn't have to be the _only_ RNG.
Link: https://lore.kernel.org/r/20240314185459.2439072-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Define _GNU_SOURCE is the base CFLAGS instead of relying on selftests to
manually #define _GNU_SOURCE, which is repetitive and error prone. E.g.
kselftest_harness.h requires _GNU_SOURCE for asprintf(), but if a selftest
includes kvm_test_harness.h after stdio.h, the include guards result in
the effective version of stdio.h consumed by kvm_test_harness.h not
defining asprintf():
In file included from x86_64/fix_hypercall_test.c:12:
In file included from include/kvm_test_harness.h:11:
../kselftest_harness.h:1169:2: error: call to undeclared function
'asprintf'; ISO C99 and later do not support implicit function declarations
[-Wimplicit-function-declaration]
1169 | asprintf(&test_name, "%s%s%s.%s", f->name,
| ^
When including the rseq selftest's "library" code, #undef _GNU_SOURCE so
that rseq.c controls whether or not it wants to build with _GNU_SOURCE.
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240423190308.2883084-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Writing various root-only files, omit "sudo" when already running as root
to allow running the NX hugepage test on systems with a minimal rootfs,
i.e. without sudo.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240415-kvm-selftests-no-sudo-v1-1-95153ad5f470@google.com
[sean: name the helper do_sudo() instead of maybe_sudo(), massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The sources for the powerpc selftests are arranged into sub-directories.
However when the tests are built and installed, the sub-directories are
squashed, losing the structure.
For example, with the current code the result of installing the selftests is:
$ tree tools/testing/selftests/kselftest_install
tools/testing/selftests/kselftest_install
├── kselftest
│ ├── ktap_helpers.sh
│ ├── module.sh
│ ├── prefix.pl
│ └── runner.sh
├── kselftest-list.txt
├── powerpc
│ ├── alignment_handler
│ ├── attr_test
│ ├── back_to_back_ebbs_test
│ ├── bad_accesses
│ ├── bhrb_filter_map_test
│ ├── bhrb_no_crash_wo_pmu_test
│ ├── blacklisted_events_test
│ ├── cache_shape
│ ├── close_clears_pmcc_test
│ ├── context_switch
│ ├── copy_first_unaligned
...
│ ├── settings
...
│ └── wild_bctr
└── run_kselftest.sh
All the powerpc tests are squashed into the single powerpc directory. In
particular, note that there is a single `settings` file, even though
there are multiple settings files in the powerpc selftest sources. One
of the settings files ends up installed, depending on install order,
even if they have different contents.
Similarly if there were two tests with the same name in different
sub-directories they would clobber each other.
Fix it by replicating the directory structure of the source tree into
the install directory. The result being for example:
$ tree tools/testing/selftests/kselftest_install
tools/testing/selftests/kselftest_install
├── kselftest
│ ├── ktap_helpers.sh
│ ├── module.sh
│ ├── prefix.pl
│ └── runner.sh
├── kselftest-list.txt
├── powerpc
│ ├── alignment
│ │ ├── alignment_handler
│ │ └── copy_first_unaligned
│ ├── benchmarks
│ │ ├── context_switch
│ │ ├── exec_target
│ │ ├── fork
│ │ ├── futex_bench
│ │ ├── gettimeofday
│ │ ├── mmap_bench
│ │ ├── null_syscall
│ │ └── settings
...
│ ├── eeh
│ │ ├── eeh-basic.sh
│ │ ├── eeh-functions.sh
│ │ └── settings
...
│ └── vphn
│ └── test-vphn
└── run_kselftest.sh
Note multiple settings files in different sub-directories.
This change also has the effect of changing the names of the tests from
the point of view of the kselftest runner. Before the tests are named
eg:
powerpc:copy_first_unaligned
powerpc:cache_shape
powerpc:reg_access_test
After, the test collection names include the sub-directory:
powerpc/alignment:copy_first_unaligned
powerpc/cache_shape:cache_shape
powerpc/pmu/ebb:reg_access_test
That means whereas previously all powerpc tests could be run with:
$ ./run_kselftest.sh -c powerpc
After the change it's necessary to pass a regex that matches all powerpc
entries, eg:
$ ./run_kselftest.sh -c "powerpc.*"
The latter form also works before and after the change.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240422133453.1793988-2-mpe@ellerman.id.au
|
|
The pmu Makefile has grown more sub directories over the years. Rather
than open coding the rules for each subdir, use for loops.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240422133453.1793988-1-mpe@ellerman.id.au
|
|
Build breaks when executing make with run_tests for sub-folders
under powerpc. This is because, CFLAGS and GIT_VERSION macros are
defined in Makefile of toplevel powerpc folder.
make: Entering directory '/home/maddy/linux/tools/testing/selftests/powerpc/mm'
gcc hugetlb_vs_thp_test.c ../harness.c ../utils.c -o /home/maddy/selftest_output//hugetlb_vs_thp_test
hugetlb_vs_thp_test.c:6:10: fatal error: utils.h: No such file or directory
6 | #include "utils.h"
| ^~~~~~~~~
compilation terminated.
Fix this by adding the flags.mk in each sub-folder Makefile. Also remove
the CFLAGS and GIT_VERSION macros from powerpc/ folder Makefile since
the same is definied in flags.mk
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229093711.581230-3-maddy@linux.ibm.com
|
|
When running `make -C powerpc/pmu run_tests` from top level selftests
directory, currently this error is being reported:
make: Entering directory '/home/maddy/linux/tools/testing/selftests/powerpc/pmu'
Makefile:40: warning: overriding recipe for target 'emit_tests'
../../lib.mk:111: warning: ignoring old recipe for target 'emit_tests'
gcc -m64 count_instructions.c ../harness.c event.c lib.c ../utils.c loop.S -o /home/maddy/selftest_output//count_instructions
In file included from count_instructions.c:13:
event.h:12:10: fatal error: utils.h: No such file or directory
12 | #include "utils.h"
| ^~~~~~~~~
compilation terminated.
This is due to missing of include path in CFLAGS. That is, CFLAGS and
GIT_VERSION macros are defined in the powerpc/ folder Makefile which
in this case is not involved.
To address the failure in case of executing specific sub-folder test
directly, a new rule file has been addded by the patch called "flags.mk"
under selftest/powerpc/ folder and is linked to all the Makefile of
powerpc/pmu sub-folders.
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
[mpe: Fixup ifeq, make GIT_VERSION simply expanded to avoid re-executing git describe]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229093711.581230-2-maddy@linux.ibm.com
|
|
In some powerpc/ sub-folder Makefiles, CFLAGS are defined before lib.mk
include. Clean it up by re-ordering the flags to follow after the mk
include. This is needed to support sub-folders in powerpc/ buildable on
its own.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229093711.581230-1-maddy@linux.ibm.com
|
|
There is a 'malloc' call, which can be unsuccessful.
This patch will add the malloc failure checking
to avoid possible null dereference and give more information
about test fail reasons.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240423082102.2018886-1-chentao@kylinos.cn
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Remove unused parameter i in tpidr2.c main function.
Signed-off-by: xieming <xieming@kylinos.cn>
Link: https://lore.kernel.org/r/20240422015730.89805-1-xieming@kylinos.cn
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for TASK_SIZE on rv64/NOMMU, to reflect the lack of user/kernel
separation
- A fix to avoid loading rv64/NOMMU kernel past the start of RAM
- A fix for RISCV_HWPROBE_EXT_ZVFHMIN on ilp32 to avoid signed integer
overflow in the bitmask
- The sud_test kselftest has been fixed to properly swizzle the syscall
number into the return register, which are not the same on RISC-V
- A fix for a build warning in the perf tools on rv32
- A fix for the CBO selftests, to avoid non-constants leaking into the
inline asm
- A pair of fixes for T-Head PBMT errata probing, which has been
renamed MAE by the vendor
* tag 'riscv-for-linus-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: selftests: cbo: Ensure asm operands match constraints, take 2
perf riscv: Fix the warning due to the incompatible type
riscv: T-Head: Test availability bit before enabling MAE errata
riscv: thead: Rename T-Head PBMT to MAE
selftests: sud_test: return correct emulated syscall value on RISC-V
riscv: hwprobe: fix invalid sign extension for RISCV_HWPROBE_EXT_ZVFHMIN
riscv: Fix loading 64-bit NOMMU kernels past the start of RAM
riscv: Fix TASK_SIZE on 64-bit NOMMU
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-04-26
We've added 12 non-merge commits during the last 22 day(s) which contain
a total of 14 files changed, 168 insertions(+), 72 deletions(-).
The main changes are:
1) Fix BPF_PROBE_MEM in verifier and JIT to skip loads from vsyscall page,
from Puranjay Mohan.
2) Fix a crash in XDP with devmap broadcast redirect when the latter map
is in process of being torn down, from Toke Høiland-Jørgensen.
3) Fix arm64 and riscv64 BPF JITs to properly clear start time for BPF
program runtime stats, from Xu Kuohai.
4) Fix a sockmap KCSAN-reported data race in sk_psock_skb_ingress_enqueue,
from Jason Xing.
5) Fix BPF verifier error message in resolve_pseudo_ldimm64,
from Anton Protopopov.
6) Fix missing DEBUG_INFO_BTF_MODULES Kconfig menu item,
from Andrii Nakryiko.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test PROBE_MEM of VSYSCALL_ADDR on x86-64
bpf, x86: Fix PROBE_MEM runtime load check
bpf: verifier: prevent userspace memory access
xdp: use flags field to disambiguate broadcast redirect
arm32, bpf: Reimplement sign-extension mov instruction
riscv, bpf: Fix incorrect runtime stats
bpf, arm64: Fix incorrect runtime stats
bpf: Fix a verifier verbose message
bpf, skmsg: Fix NULL pointer dereference in sk_psock_skb_ingress_enqueue
MAINTAINERS: bpf: Add Lehui and Puranjay as riscv64 reviewers
MAINTAINERS: Update email address for Puranjay Mohan
bpf, kconfig: Fix DEBUG_INFO_BTF_MODULES Kconfig definition
====================
Link: https://lore.kernel.org/r/20240426224248.26197-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Throw a slightly more helpful exception when env variables
are partially populated. Prior to this change we'd get
a dictionary key exception somewhere later on.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240425222341.309778-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The shell lexer is not helping much, do very basic parsing
manually.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240425222341.309778-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add more info to the README. It's also now copied to GitHub for
increased visibility:
https://github.com/linux-netdev/nipa/wiki/Running-driver-tests
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240425222341.309778-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"11 hotfixes. 8 are cc:stable and the remaining 3 (nice ratio!) address
post-6.8 issues or aren't considered suitable for backporting.
All except one of these are for MM. I see no particular theme - it's
singletons all over"
* tag 'mm-hotfixes-stable-2024-04-26-13-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/hugetlb: fix DEBUG_LOCKS_WARN_ON(1) when dissolve_free_hugetlb_folio()
selftests: mm: protection_keys: save/restore nr_hugepages value from launch script
stackdepot: respect __GFP_NOLOCKDEP allocation flag
hugetlb: check for anon_vma prior to folio allocation
mm: zswap: fix shrinker NULL crash with cgroup_disable=memory
mm: turn folio_test_hugetlb into a PageType
mm: support page_mapcount() on page_has_type() pages
mm: create FOLIO_FLAG_FALSE and FOLIO_TYPE_OPS macros
mm/hugetlb: fix missing hugetlb_lock for resv uncharge
selftests: mm: fix unused and uninitialized variable warning
selftests/harness: remove use of LINE_MAX
|
|
Commit 0de65288d75f ("RISC-V: selftests: cbo: Ensure asm operands
match constraints") attempted to ensure MK_CBO() would always
provide to a compile-time constant when given a constant, but
cpu_to_le32() isn't necessarily going to do that. Switch to manually
shifting the bytes, when needed, to finally get this right.
Reported-by: Woodrow Shen <woodrow.shen@sifive.com>
Closes: https://lore.kernel.org/all/CABquHATcBTUwfLpd9sPObBgNobqQKEAZ2yxk+TWSpyO5xvpXpg@mail.gmail.com/
Fixes: a29e2a48afe3 ("RISC-V: selftests: Add CBO tests")
Fixes: 0de65288d75f ("RISC-V: selftests: cbo: Ensure asm operands match constraints")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240322134728.151255-2-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The vsyscall is a legacy API for fast execution of system calls. It maps
a page at address VSYSCALL_ADDR into the userspace program. This address
is in the top 10MB of the address space:
ffffffffff600000 - ffffffffff600fff | 4 kB | legacy vsyscall ABI
The last commit fixes the x86-64 BPF JIT to skip accessing addresses in
this memory region. Add this address to bpf_testmod_return_ptr() so we
can make sure that it is fixed.
After this change and without the previous commit, subprogs_extable
selftest will crash the kernel.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20240424100210.11982-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce initial tests for virtio_net driver. Focus on feature testing
leveraging previously introduced debugfs feature filtering
infrastructure. Add very basic ping and F_MAC feature tests.
To run this, do:
$ make -C tools/testing/selftests/ TARGETS=drivers/net/virtio_net/ run_tests
Run it on a system with 2 virtio_net devices connected back-to-back
on the hypervisor.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The existing setup_wait*() helper family check the status of the
interface to be up. Introduce wait_for_dev() to wait for the netdevice
to appear, for example after test script does manual device bind.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a helper to be used to check if the netdevice is backed by specified
driver.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Allow driver tests to work without specifying the netdevice names.
Introduce a possibility to search for available netdevices according to
set driver name. Allow test to specify the name by setting
NETIF_FIND_DRIVER variable.
Note that user overrides this either by passing netdevice names on the
command line or by declaring NETIFS array in custom forwarding.config
configuration file.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch adds hsr_redbox.sh script to test if HSR-SAN mode of operation
works correctly.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Current code checks if ping command output match hardcoded pattern:
"10 packets transmitted, 10 received, 0% packet loss,".
Such approach will work only from one ping program version (for which
this test has been originally written).
This patch address problem when ping with different summary output
like "10 packets transmitted, 10 packets received, 0% packet" is
used to run this test - for example one from busybox (as the test
system runs in QEMU with rootfs created with buildroot).
The fix is to modify output of ping command to be agnostic to ping
version used on the platform.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some of the code already present in the hsr_ping.sh test program can be
moved to a separate script file, so it can be reused by other HSR
functionality (like HSR-SAN) tests.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some parts (like netns creation and cleanup) of hsr_ping.sh script are
already implemented in ../lib.sh common script, so can be replaced by it.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
SBI PMU test comprises of multiple tests and user may want to run
only a subset depending on the platform. The most common case would
be to run all to validate all the tests. However, some platform may
not support all events or all ISA extensions.
The commandline option allows user to disable any set of tests if
they want to.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240420151741.962500-25-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add a test for verifying overflow interrupt. Currently, it relies on
overflow support on cycle/instret events. This test works for cycle/
instret events which support sampling via hpmcounters on the platform.
There are no ISA extensions to detect if a platform supports that. Thus,
this test will fail on platform with virtualization but doesn't
support overflow on these two events.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-24-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Verify PMU snapshot functionality by setting up the shared memory
correctly and reading the counter values from the shared memory
instead of the CSR.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-23-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
This test implements basic sanity test and cycle/instret event
counting tests.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-22-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The SBI PMU extension definition is required for upcoming SBI PMU
selftests.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-21-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The KVM RISC-V allows Sscofpmf extension for Guest/VM so let us
add this extension to get-reg-list test.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-20-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
__vcpu_has_ext can check both SBI and ISA extensions when the first
argument is properly converted to SBI/ISA extension IDs. Introduce
two helper functions to make life easier for developers so they
don't have to worry about the conversions.
Replace the current usages as well with new helpers.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240420151741.962500-19-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
