| Age | Commit message (Collapse) | Author |
|---|
|
Still a bit unclear whether each directory should have its own
config file, but assuming they should lets add one for tcp_ao.
The following tests still fail with this config in place:
- rst_ipv4,
- rst_ipv6,
- bench-lookups_ipv6.
other 21 pass.
Fixes: d11301f65977 ("selftests/net: Add TCP-AO ICMPs accept test")
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20240124192550.1865743-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If there is more than 32 cpus the bitmask will start to contain
commas, leading to:
./rps_default_mask.sh: line 36: [: 00000000,00000000: integer expression expected
Remove the commas, bash doesn't interpret leading zeroes as oct
so that should be good enough. Switch to bash, Simon reports that
not all shells support this type of substitution.
Fixes: c12e0d5f267d ("self-tests: introduce self-tests for RPS default mask")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240122195815.638997-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We are missing a lot of config options from net selftests,
it seems:
tun/tap: CONFIG_TUN, CONFIG_MACVLAN, CONFIG_MACVTAP
fib_tests: CONFIG_NET_SCH_FQ_CODEL
l2tp: CONFIG_L2TP, CONFIG_L2TP_V3, CONFIG_L2TP_IP, CONFIG_L2TP_ETH
sctp-vrf: CONFIG_INET_DIAG
txtimestamp: CONFIG_NET_CLS_U32
vxlan_mdb: CONFIG_BRIDGE_VLAN_FILTERING
gre_gso: CONFIG_NET_IPGRE_DEMUX, CONFIG_IP_GRE, CONFIG_IPV6_GRE
srv6_end_dt*_l3vpn: CONFIG_IPV6_SEG6_LWTUNNEL
ip_local_port_range: CONFIG_MPTCP
fib_test: CONFIG_NET_CLS_BASIC
rtnetlink: CONFIG_MACSEC, CONFIG_NET_SCH_HTB, CONFIG_XFRM_INTERFACE
CONFIG_NET_IPGRE, CONFIG_BONDING
fib_nexthops: CONFIG_MPLS, CONFIG_MPLS_ROUTING
vxlan_mdb: CONFIG_NET_ACT_GACT
tls: CONFIG_TLS, CONFIG_CRYPTO_CHACHA20POLY1305
psample: CONFIG_PSAMPLE
fcnal: CONFIG_TCP_MD5SIG
Try to add them in a semi-alphabetical order.
Fixes: 62199e3f1658 ("selftests: net: Add VXLAN MDB test")
Fixes: c12e0d5f267d ("self-tests: introduce self-tests for RPS default mask")
Fixes: 122db5e3634b ("selftests/net: add MPTCP coverage for IP_LOCAL_PORT_RANGE")
Link: https://lore.kernel.org/r/20240122203528.672004-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub reported that ASSERT_EQ(cpu, i) in so_incoming_cpu.c seems to
fire somewhat randomly.
# # RUN so_incoming_cpu.before_reuseport.test3 ...
# # so_incoming_cpu.c:191:test3:Expected cpu (32) == i (0)
# # test3: Test terminated by assertion
# # FAIL so_incoming_cpu.before_reuseport.test3
# not ok 3 so_incoming_cpu.before_reuseport.test3
When the test failed, not-yet-accepted CLOSE_WAIT sockets received
SYN with a "challenging" SEQ number, which was sent from an unexpected
CPU that did not create the receiver.
The test basically does:
1. for each cpu:
1-1. create a server
1-2. set SO_INCOMING_CPU
2. for each cpu:
2-1. set cpu affinity
2-2. create some clients
2-3. let clients connect() to the server on the same cpu
2-4. close() clients
3. for each server:
3-1. accept() all child sockets
3-2. check if all children have the same SO_INCOMING_CPU with the server
The root cause was the close() in 2-4. and net.ipv4.tcp_tw_reuse.
In a loop of 2., close() changed the client state to FIN_WAIT_2, and
the peer transitioned to CLOSE_WAIT.
In another loop of 2., connect() happened to select the same port of
the FIN_WAIT_2 socket, and it was reused as the default value of
net.ipv4.tcp_tw_reuse is 2.
As a result, the new client sent SYN to the CLOSE_WAIT socket from
a different CPU, and the receiver's sk_incoming_cpu was overwritten
with unexpected CPU ID.
Also, the SYN had a different SEQ number, so the CLOSE_WAIT socket
responded with Challenge ACK. The new client properly returned RST
and effectively killed the CLOSE_WAIT socket.
This way, all clients were created successfully, but the error was
detected later by 3-2., ASSERT_EQ(cpu, i).
To avoid the failure, let's make sure that (i) the number of clients
is less than the number of available ports and (ii) such reuse never
happens.
Fixes: 6df96146b202 ("selftest: Add test for SO_INCOMING_CPU.")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240120031642.67014-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This is a follow-up of commit a159cbe81d3b ("selftests: rtnetlink: check
enslaving iface in a bond") after the merge of net-next into net.
The goal is to follow the new convention,
see commit d3b6b1116127 ("selftests/net: convert rtnetlink.sh to run it in
unique namespace") for more details.
Let's use also the generic dummy name instead of defining a new one.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240115135922.3662648-1-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The lib.sh script is meant to be sourced from other scripts, not executed
directly. Therefore, remove the executable bits from lib.sh's permissions.
Fixes: fe32dffdcd33 ("selftests: forwarding: add TCPDUMP_EXTRA_FLAGS to lib.sh")
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzbot found an error with how splice() is handled with a msg greater
than 32. This was fixed in previous patch, but lets add a test for
it to ensure it continues to work.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The goal is to check the following two sequences:
> ip link set dummy0 up
> ip link set dummy0 master bond0 down
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240108094103.2001224-3-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rules to link selftests are:
> $(OUTPUT)/%_ipv4: %.c
> $(LINK.c) $^ $(LDLIBS) -o $@
>
> $(OUTPUT)/%_ipv6: %.c
> $(LINK.c) -DIPV6_TEST $^ $(LDLIBS) -o $@
The intel test robot uses only selftest's Makefile, not the top linux
Makefile:
> make W=1 O=/tmp/kselftest -C tools/testing/selftests
So, $(LINK.c) is determined by environment, rather than by kernel
Makefiles. On my machine (as well as other people that ran tcp-ao
selftests) GNU/Make implicit definition does use $(LDFLAGS):
> [dima@Mindolluin ~]$ make -p -f/dev/null | grep '^LINK.c\>'
> make: *** No targets. Stop.
> LINK.c = $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH)
But, according to build robot report, it's not the case for them.
While I could just avoid using pre-defined $(LINK.c), it's also used by
selftests/lib.mk by default.
Anyways, according to GNU/Make documentation [1], I should have used
$(LDLIBS) instead of $(LDFLAGS) in the first place, so let's just do it:
> LDFLAGS
> Extra flags to give to compilers when they are supposed to invoke
> the linker, ‘ld’, such as -L. Libraries (-lfoo) should be added
> to the LDLIBS variable instead.
> LDLIBS
> Library flags or names given to compilers when they are supposed
> to invoke the linker, ‘ld’. LOADLIBES is a deprecated (but still
> supported) alternative to LDLIBS. Non-library linker flags, such
> as -L, should go in the LDFLAGS variable.
[1]: https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html
Fixes: cfbab37b3da0 ("selftests/net: Add TCP-AO library")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401011151.veyYTJzq-lkp@intel.com/
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240110-tcp_ao-selftests-makefile-v1-1-aa07d043f052@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The expression "source ../lib.sh" added to net/forwarding/lib.sh in commit
25ae948b4478 ("selftests/net: add lib.sh") does not work for tests outside
net/forwarding which source net/forwarding/lib.sh (1). It also does not
work in some cases where only a subset of tests are exported (2).
Avoid the problems mentioned above by replacing the faulty expression with
a copy of the content from net/lib.sh which is used by files under
net/forwarding.
A more thorough solution which avoids duplicating content between
net/lib.sh and net/forwarding/lib.sh has been posted here:
https://lore.kernel.org/netdev/20231222135836.992841-1-bpoirier@nvidia.com/
The approach in the current patch is a stopgap solution to avoid submitting
large changes at the eleventh hour of this development cycle.
Example of problem 1)
tools/testing/selftests/drivers/net/bonding$ ./dev_addr_lists.sh
./net_forwarding_lib.sh: line 41: ../lib.sh: No such file or directory
TEST: bonding cleanup mode active-backup [ OK ]
TEST: bonding cleanup mode 802.3ad [ OK ]
TEST: bonding LACPDU multicast address to slave (from bond down) [ OK ]
TEST: bonding LACPDU multicast address to slave (from bond up) [ OK ]
An error message is printed but since the test does not use functions from
net/lib.sh, the test results are not affected.
Example of problem 2)
tools/testing/selftests$ make install TARGETS="net/forwarding"
tools/testing/selftests$ cd kselftest_install/net/forwarding/
tools/testing/selftests/kselftest_install/net/forwarding$ ./pedit_ip.sh veth{0..3}
lib.sh: line 41: ../lib.sh: No such file or directory
TEST: ping [ OK ]
TEST: ping6 [ OK ]
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip src set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip src set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip dst set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip dst set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip6 src set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip6 src set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip6 dst set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip6 dst set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
In this case, the test results are affected.
Fixes: 25ae948b4478 ("selftests/net: add lib.sh")
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Suggested-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240104141109.100672-1-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently there is no test which checks that IPv6 extension header packets
successfully coalesce. This commit adds a test, which verifies two IPv6
packets with HBH extension headers do coalesce, and another test which
checks that packets with different extension header data do not coalesce
in GRO.
I changed the receive socket filter to accept a packet with one extension
header. This change exposed a bug in the fragment test -- the old BPF did
not accept the fragment packet. I updated correct_num_packets in the
fragment test accordingly.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/69282fed-2415-47e8-b3d3-34939ec3eb56@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The patch set [1] added a general lib.sh in net selftests, and converted
several test scripts to source the lib.sh.
unicast_extensions.sh (converted in [1]) and pmtu.sh (converted in [2])
have a /bin/sh shebang which may point to various shells in different
distributions, but "source" is only available in some of them. For
example, "source" is a built-it function in bash, but it cannot be
used in dash.
Refer to other scripts that were converted together, simply change the
shebang to bash to fix the following issues when the default /bin/sh
points to other shells.
not ok 51 selftests: net: unicast_extensions.sh # exit=1
v1 -> v2:
- Fix pmtu.sh which has the same issue as unicast_extensions.sh,
suggested by Hangbin
- Change the style of the "source" line to be consistent with other
tests, suggested by Hangbin
Link: https://lore.kernel.org/all/20231202020110.362433-1-liuhangbin@gmail.com/ [1]
Link: https://lore.kernel.org/all/20231219094856.1740079-1-liuhangbin@gmail.com/ [2]
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 378f082eaf37 ("selftests/net: convert pmtu.sh to run it in unique namespace")
Fixes: 0f4765d0b48d ("selftests/net: convert unicast_extensions.sh to run it in unique namespace")
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20231229131931.3961150-1-yujie.liu@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds a new helper chk_msk_cestab() to check the current
established connections counter MIB_CURRESTAB in diag.sh. Invoke it
to check the counter during the connection after every chk_msk_inuse().
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a new helper chk_cestab_nr() to check the current
established connections counter MIB_CURRESTAB. Set the newly added
variables cestab_ns1 and cestab_ns2 to indicate how many connections
are expected in ns1 or ns2.
Invoke check_cestab() to check the counter during the connection in
do_transfer() and invoke chk_cestab_nr() to re-check it when the
connection closed. These checks are embedded in add_tests().
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit f5769faeec36 ("net: Namespace-ify sysctl_optmem_max")
optmem_max is per-netns, so need of switching to root namespace.
It seems trivial to keep the old logic working, so going to keep it for
a while (at least, until kernel with netns-optmem_max will be release).
Currently, there is a test that checks that optmem_max limit applies to
TCP-AO keys and a little benchmark that measures linked-list TCP-AO keys
scaling, those are fixed by this.
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In unsigned-md5 selftests ip_route_add() is not needed in
client_add_ip(): the route was pre-setup in __test_init() => link_init()
for subnet, rather than a specific ip-address.
Currently, __ip_route_add() mistakenly always sets VRF table
to RT_TABLE_MAIN - this seems to have sneaked in during unsigned-md5
tests debugging. That also explains, why ip_route_add_vrf() ignored
EEXIST, returned by fib6.
Yet, keep EEXIST ignoring in bench-lookups selftests as it's expected
that those selftests may add the same (duplicate) routes.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since previous commit, MPTCP has support for IP_BIND_ADDRESS_NO_PORT and
IP_LOCAL_PORT_RANGE sockopts.
Add ip4_mptcp and ip6_mptcp fixture variants to ip_local_port_range
selftest to provide selftest coverage for these sockopts.
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Maxim Galaganov <max@internet.ru>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
report pMAC stats
Some devices do not support individual 'pmac' and 'emac' stats.
For such devices, resort to 'aggregate' stats.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some devices have errata due to which they cannot report ETH_ZLEN (60)
in the rx-min-frag-size. This was foreseen of course, and lldpad has
logic that when we request it to advertise addFragSize 0, it will round
it up to the lowest value that is _actually_ supported by the hardware.
The problem is that the selftest expects lldpad to report back to us the
same value as we requested.
Make the selftest smarter by figuring out on its own what is a
reasonable value to expect.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pmtu test use /bin/sh, so we need to source ./lib.sh instead of lib.sh
Here is the test result after conversion.
# ./pmtu.sh
TEST: ipv4: PMTU exceptions [ OK ]
TEST: ipv4: PMTU exceptions - nexthop objects [ OK ]
TEST: ipv6: PMTU exceptions [ OK ]
TEST: ipv6: PMTU exceptions - nexthop objects [ OK ]
...
TEST: ipv4: list and flush cached exceptions - nexthop objects [ OK ]
TEST: ipv6: list and flush cached exceptions [ OK ]
TEST: ipv6: list and flush cached exceptions - nexthop objects [ OK ]
TEST: ipv4: PMTU exception w/route replace [ OK ]
TEST: ipv4: PMTU exception w/route replace - nexthop objects [ OK ]
TEST: ipv6: PMTU exception w/route replace [ OK ]
TEST: ipv6: PMTU exception w/route replace - nexthop objects [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The setup_loopback and setup_veth use their own way to create namespace.
So let's just re-define server_ns/client_ns to unique name.
At the same time update the namespace name in gro.sh and toeplitz.sh.
As I don't have env to run toeplitz.sh. Here is only the gro test result.
# ./gro.sh
running test ipv4 data
Expected {200 }, Total 1 packets
Received {200 }, Total 1 packets.
...
Gro::large test passed.
All Tests Succeeded!
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Here is the test result after conversion.
# ./xfrm_policy.sh
PASS: policy before exception matches
PASS: ping to .254 bypassed ipsec tunnel (exceptions)
PASS: direct policy matches (exceptions)
PASS: policy matches (exceptions)
PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies)
PASS: direct policy matches (exceptions and block policies)
PASS: policy matches (exceptions and block policies)
PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after hresh changes)
PASS: direct policy matches (exceptions and block policies after hresh changes)
PASS: policy matches (exceptions and block policies after hresh changes)
PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after hthresh change in ns3)
PASS: direct policy matches (exceptions and block policies after hthresh change in ns3)
PASS: policy matches (exceptions and block policies after hthresh change in ns3)
PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after htresh change to normal)
PASS: direct policy matches (exceptions and block policies after htresh change to normal)
PASS: policy matches (exceptions and block policies after htresh change to normal)
PASS: policies with repeated htresh change
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Here is the test result after conversion.
# ./stress_reuseport_listen.sh
listen 24000 socks took 0.47714
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When running the test in namespace, the debugfs may not load automatically.
So add a checking to make sure debugfs loaded. Here is the test result
after conversion.
# ./rtnetlink.sh
PASS: policy routing
PASS: route get
...
PASS: address proto IPv4
PASS: address proto IPv6
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This test will move the device to netns 1. Add a new test_ns to do this.
Here is the test result after conversion.
# ./netns-name.sh
netns-name.sh [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Here is the test result after conversion.
# ./gre_gso.sh
TEST: GREv6/v4 - copy file w/ TSO [ OK ]
TEST: GREv6/v4 - copy file w/ GSO [ OK ]
TEST: GREv6/v6 - copy file w/ TSO [ OK ]
TEST: GREv6/v6 - copy file w/ GSO [ OK ]
Tests passed: 4
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No functional modification involved.
./tools/testing/selftests/net/tcp_ao/setsockopt-closed.c:121:2-3: Unneeded semicolon.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7771
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Trivial fix for out-of-tree build that I wasn't testing previously:
1. Create a directory for library object files, fixes:
> gcc lib/kconfig.c -Wall -O2 -g -D_GNU_SOURCE -fno-strict-aliasing -I ../../../../../usr/include/ -iquote /tmp/kselftest/kselftest/net/tcp_ao/lib -I ../../../../include/ -o /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o -c
> Assembler messages:
> Fatal error: can't create /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o: No such file or directory
> make[1]: *** [Makefile:46: /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o] Error 1
2. Include $(KHDR_INCLUDES) that's exported by selftests/Makefile, fixes:
> In file included from lib/kconfig.c:6:
> lib/aolib.h:320:45: warning: ‘struct tcp_ao_add’ declared inside parameter list will not be visible outside of this definition or declaration
> 320 | extern int test_prepare_key_sockaddr(struct tcp_ao_add *ao, const char *alg,
> | ^~~~~~~~~~
...
3. While at here, clean-up $(KSFT_KHDR_INSTALL): it's not needed anymore
since commit f2745dc0ba3d ("selftests: stop using KSFT_KHDR_INSTALL")
4. Also, while at here, drop .DEFAULT_GOAL definition: that has a
self-explaining comment, that was valid when I made these selftests
compile on local v4.19 kernel, but not needed since
commit 8ce72dc32578 ("selftests: fix headers_install circular dependency")
Fixes: cfbab37b3da0 ("selftests/net: Add TCP-AO library")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312190645.q76MmHyq-lkp@intel.com/
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are a handful of spelling mistakes in test messages in the
TCP-AIO selftests. Fix these.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c
23c93c3b6275 ("bnxt_en: do not map packet buffers twice")
6d1add95536b ("bnxt_en: Modify TX ring indexing logic.")
tools/testing/selftests/net/Makefile
2258b666482d ("selftests: add vlan hw filter tests")
a0bc96c0cd6e ("selftests: net: verify fq per-band packet limit")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
run_cmd_grep_fail should be used when expecting the cmd fail, or the ret
will be set to 1, and the total test return 1 when exiting. This would cause
the result report to fail if run via run_kselftest.sh.
Before fix:
# ./rtnetlink.sh -t kci_test_addrlft
PASS: preferred_lft addresses have expired
# echo $?
1
After fix:
# ./rtnetlink.sh -t kci_test_addrlft
PASS: preferred_lft addresses have expired
# echo $?
0
Fixes: 9c2a19f71515 ("kselftest: rtnetlink.sh: add verbose flag")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231219065737.1725120-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add test cases to verify the behavior of the MDB bulk deletion
functionality in the VXLAN driver.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add test cases to verify the behavior of the MDB bulk deletion
functionality in the bridge driver.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add one basic vlan hw filter test.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
MPC backups tests will skip unexpected sometimes (For example, when
compiling kernel with an older version of gcc, such as gcc-8), since
static functions like mptcp_subflow_send_ack also be listed in
/proc/kallsyms, with a 't' in front of it, not 'T' ('T' is for a global
function):
> grep "mptcp_subflow_send_ack" /proc/kallsyms
0000000000000000 T __pfx___mptcp_subflow_send_ack
0000000000000000 T __mptcp_subflow_send_ack
0000000000000000 t __pfx_mptcp_subflow_send_ack
0000000000000000 t mptcp_subflow_send_ack
In this case, mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"
will be false, MPC backups tests will skip. This is not what we expected.
The correct logic here should be: if mptcp_subflow_send_ack is not a
global function in /proc/kallsyms, do these MPC backups tests. So a 'T'
must be added in front of mptcp_subflow_send_ack.
Fixes: 632978f0a961 ("selftests: mptcp: join: skip MPC backups tests if not supported")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check multiple keys on a socket:
- rotation on closed socket
- current/rnext operations shouldn't be possible on listen sockets
- current/rnext key set should be the one, that's used on connect()
- key rotations with pseudo-random generated keys
- copying matching keys on connect() and on accept()
At this moment there are 3 tests that are "expected" to fail: a kernel
fix is needed to improve the situation, they are marked XFAIL.
Sample output:
> # ./key-management_ipv4
> 1..120
> # 1601[lib/setup.c:239] rand seed 1700526653
> TAP version 13
> ok 1 closed socket, delete a key: the key was deleted
> ok 2 closed socket, delete all keys: the key was deleted
> ok 3 closed socket, delete current key: key deletion was prevented
> ok 4 closed socket, delete rnext key: key deletion was prevented
> ok 5 closed socket, delete a key + set current/rnext: the key was deleted
> ok 6 closed socket, force-delete current key: the key was deleted
> ok 7 closed socket, force-delete rnext key: the key was deleted
> ok 8 closed socket, delete current+rnext key: key deletion was prevented
> ok 9 closed socket, add + change current key
> ok 10 closed socket, add + change rnext key
> ok 11 listen socket, delete a key: the key was deleted
> ok 12 listen socket, delete all keys: the key was deleted
> ok 13 listen socket, setting current key not allowed
> ok 14 listen socket, setting rnext key not allowed
> ok 15 # XFAIL listen() after current/rnext keys set: the socket has current/rnext keys: 100:200
> ok 16 # XFAIL listen socket, delete current key from before listen(): failed to delete the key 100:100 -16
> ok 17 # XFAIL listen socket, delete rnext key from before listen(): failed to delete the key 200:200 -16
> ok 18 listen socket, getsockopt(TCP_AO_REPAIR) is restricted
> ok 19 listen socket, setsockopt(TCP_AO_REPAIR) is restricted
> ok 20 listen socket, delete a key + set current/rnext: key deletion was prevented
> ok 21 listen socket, force-delete current key: key deletion was prevented
> ok 22 listen socket, force-delete rnext key: key deletion was prevented
> ok 23 listen socket, delete a key: the key was deleted
> ok 24 listen socket, add + change current key
> ok 25 listen socket, add + change rnext key
> ok 26 server: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations
> ok 27 client: Check current/rnext keys unset before connect(): current key 19 as expected
> ok 28 client: Check current/rnext keys unset before connect(): rnext key 146 as expected
> ok 29 server: Check current/rnext keys unset before connect(): server alive
> ok 30 server: Check current/rnext keys unset before connect(): passed counters checks
> ok 31 client: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations
> ok 32 server: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations
> ok 33 server: Check current/rnext keys unset before connect(): passed counters checks
> ok 34 client: Check current/rnext keys unset before connect(): passed counters checks
> ok 35 server: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 36 server: Check current/rnext keys set before connect(): server alive
> ok 37 server: Check current/rnext keys set before connect(): passed counters checks
> ok 38 client: Check current/rnext keys set before connect(): current key 10 as expected
> ok 39 client: Check current/rnext keys set before connect(): rnext key 137 as expected
> ok 40 server: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 41 client: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 42 client: Check current/rnext keys set before connect(): passed counters checks
> ok 43 server: Check current/rnext keys set before connect(): passed counters checks
> ok 44 server: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 45 server: Check current != rnext keys set before connect(): server alive
> ok 46 server: Check current != rnext keys set before connect(): passed counters checks
> ok 47 client: Check current != rnext keys set before connect(): current key 10 as expected
> ok 48 client: Check current != rnext keys set before connect(): rnext key 132 as expected
> ok 49 server: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 50 client: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 51 client: Check current != rnext keys set before connect(): passed counters checks
> ok 52 server: Check current != rnext keys set before connect(): passed counters checks
> ok 53 server: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations
> ok 54 server: Check current flapping back on peer's RnextKey request: server alive
> ok 55 server: Check current flapping back on peer's RnextKey request: passed counters checks
> ok 56 client: Check current flapping back on peer's RnextKey request: current key 10 as expected
> ok 57 client: Check current flapping back on peer's RnextKey request: rnext key 132 as expected
> ok 58 server: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations
> ok 59 client: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations
> ok 60 server: Check current flapping back on peer's RnextKey request: passed counters checks
> ok 61 client: Check current flapping back on peer's RnextKey request: passed counters checks
> ok 62 server: Rotate over all different keys: The socket keys are consistent with the expectations
> ok 63 server: Rotate over all different keys: server alive
> ok 64 server: Rotate over all different keys: passed counters checks
> ok 65 server: Rotate over all different keys: current key 128 as expected
> ok 66 client: Rotate over all different keys: rnext key 128 as expected
> ok 67 server: Rotate over all different keys: current key 129 as expected
> ok 68 client: Rotate over all different keys: rnext key 129 as expected
> ok 69 server: Rotate over all different keys: current key 130 as expected
> ok 70 client: Rotate over all different keys: rnext key 130 as expected
> ok 71 server: Rotate over all different keys: current key 131 as expected
> ok 72 client: Rotate over all different keys: rnext key 131 as expected
> ok 73 server: Rotate over all different keys: current key 132 as expected
> ok 74 client: Rotate over all different keys: rnext key 132 as expected
> ok 75 server: Rotate over all different keys: current key 133 as expected
> ok 76 client: Rotate over all different keys: rnext key 133 as expected
> ok 77 server: Rotate over all different keys: current key 134 as expected
> ok 78 client: Rotate over all different keys: rnext key 134 as expected
> ok 79 server: Rotate over all different keys: current key 135 as expected
> ok 80 client: Rotate over all different keys: rnext key 135 as expected
> ok 81 server: Rotate over all different keys: current key 136 as expected
> ok 82 client: Rotate over all different keys: rnext key 136 as expected
> ok 83 server: Rotate over all different keys: current key 137 as expected
> ok 84 client: Rotate over all different keys: rnext key 137 as expected
> ok 85 server: Rotate over all different keys: current key 138 as expected
> ok 86 client: Rotate over all different keys: rnext key 138 as expected
> ok 87 server: Rotate over all different keys: current key 139 as expected
> ok 88 client: Rotate over all different keys: rnext key 139 as expected
> ok 89 server: Rotate over all different keys: current key 140 as expected
> ok 90 client: Rotate over all different keys: rnext key 140 as expected
> ok 91 server: Rotate over all different keys: current key 141 as expected
> ok 92 client: Rotate over all different keys: rnext key 141 as expected
> ok 93 server: Rotate over all different keys: current key 142 as expected
> ok 94 client: Rotate over all different keys: rnext key 142 as expected
> ok 95 server: Rotate over all different keys: current key 143 as expected
> ok 96 client: Rotate over all different keys: rnext key 143 as expected
> ok 97 server: Rotate over all different keys: current key 144 as expected
> ok 98 client: Rotate over all different keys: rnext key 144 as expected
> ok 99 server: Rotate over all different keys: current key 145 as expected
> ok 100 client: Rotate over all different keys: rnext key 145 as expected
> ok 101 server: Rotate over all different keys: current key 146 as expected
> ok 102 client: Rotate over all different keys: rnext key 146 as expected
> ok 103 server: Rotate over all different keys: current key 127 as expected
> ok 104 client: Rotate over all different keys: rnext key 127 as expected
> ok 105 client: Rotate over all different keys: current key 0 as expected
> ok 106 client: Rotate over all different keys: rnext key 127 as expected
> ok 107 server: Rotate over all different keys: The socket keys are consistent with the expectations
> ok 108 client: Rotate over all different keys: The socket keys are consistent with the expectations
> ok 109 client: Rotate over all different keys: passed counters checks
> ok 110 server: Rotate over all different keys: passed counters checks
> ok 111 server: Check accept() => established key matching: The socket keys are consistent with the expectations
> ok 112 Can't add a key with non-matching ip-address for established sk
> ok 113 Can't add a key with non-matching VRF for established sk
> ok 114 server: Check accept() => established key matching: server alive
> ok 115 server: Check accept() => established key matching: passed counters checks
> ok 116 client: Check connect() => established key matching: current key 0 as expected
> ok 117 client: Check connect() => established key matching: rnext key 128 as expected
> ok 118 client: Check connect() => established key matching: The socket keys are consistent with the expectations
> ok 119 server: Check accept() => established key matching: The socket keys are consistent with the expectations
> ok 120 server: Check accept() => established key matching: passed counters checks
> # Totals: pass:120 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check that a rare functionality of TCP named self-connect works with
TCP-AO. This "under the cover" also checks TCP simultaneous connect
(TCP_SYN_RECV socket state), which would be harder to check other ways.
In order to verify that it's indeed TCP simultaneous connect, check
the counters TCPChallengeACK and TCPSYNChallenge.
Sample of the output:
> # ./self-connect_ipv6
> 1..4
> # 1738[lib/setup.c:254] rand seed 1696451931
> TAP version 13
> ok 1 self-connect(same keyids): connect TCPAOGood 0 => 24
> ok 2 self-connect(different keyids): connect TCPAOGood 26 => 50
> ok 3 self-connect(restore): connect TCPAOGood 52 => 97
> ok 4 self-connect(restore, different keyids): connect TCPAOGood 99 => 144
> # Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check that both active and passive reset works and correctly sign
segments with TCP-AO or don't send RSTs if not possible to sign.
A listening socket with backlog = 0 gets one connection in accept
queue, another in syn queue. Once the server/listener socket is
forcibly closed, client sockets aren't connected to anything.
In regular situation they would receive RST on any segment, but
with TCP-AO as there's no listener, no AO-key and unknown ISNs,
no RST should be sent.
And "passive" reset, where RST is sent on reply for some segment
(tcp_v{4,6}_send_reset()) - there use TCP_REPAIR to corrupt SEQ numbers,
which later results in TCP-AO signed RST, which will be verified and
client socket will get EPIPE.
No TCPAORequired/TCPAOBad segments are expected during these tests.
Sample of the output:
> # ./rst_ipv4
> 1..15
> # 1462[lib/setup.c:254] rand seed 1686611171
> TAP version 13
> ok 1 servered 1000 bytes
> ok 2 Verified established tcp connection
> ok 3 sk[0] = 7, connection was reset
> ok 4 sk[1] = 8, connection was reset
> ok 5 sk[2] = 9
> ok 6 MKT counters are good on server
> ok 7 Verified established tcp connection
> ok 8 client connection broken post-seq-adjust
> ok 9 client connection was reset
> ok 10 No segments without AO sign (server)
> ok 11 Signed AO segments (server): 0 => 30
> ok 12 No segments with bad AO sign (server)
> ok 13 No segments without AO sign (client)
> ok 14 Signed AO segments (client): 0 => 30
> ok 15 No segments with bad AO sign (client)
> # Totals: pass:15 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check that on SEQ number wraparound there is no disruption or TCPAOBad
segments produced.
Sample of expected output:
> # ./seq-ext_ipv4
> 1..7
> # 1436[lib/setup.c:254] rand seed 1686611079
> TAP version 13
> ok 1 server alive
> ok 2 post-migrate connection alive
> ok 3 TCPAOGood counter increased 1002 => 3002
> ok 4 TCPAOGood counter increased 1003 => 3003
> ok 5 TCPAOBad counter didn't increase
> ok 6 TCPAOBad counter didn't increase
> ok 7 SEQ extension incremented: 1/1999, 1/998999
> # Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The test plan is:
1. check that TCP-AO connection may be restored on another socket
2. check restore with wrong send/recv ISN (checking that they are
part of MAC generation)
3. check restore with wrong SEQ number extension (checking that
high bytes of it taken into MAC generation)
Sample output expected:
> # ./restore_ipv4
> 1..20
> # 1412[lib/setup.c:254] rand seed 1686610825
> TAP version 13
> ok 1 TCP-AO migrate to another socket: server alive
> ok 2 TCP-AO migrate to another socket: post-migrate connection is alive
> ok 3 TCP-AO migrate to another socket: counter TCPAOGood increased 23 => 44
> ok 4 TCP-AO migrate to another socket: counter TCPAOGood increased 22 => 42
> ok 5 TCP-AO with wrong send ISN: server couldn't serve
> ok 6 TCP-AO with wrong send ISN: post-migrate connection is broken
> ok 7 TCP-AO with wrong send ISN: counter TCPAOBad increased 0 => 4
> ok 8 TCP-AO with wrong send ISN: counter TCPAOBad increased 0 => 3
> ok 9 TCP-AO with wrong receive ISN: server couldn't serve
> ok 10 TCP-AO with wrong receive ISN: post-migrate connection is broken
> ok 11 TCP-AO with wrong receive ISN: counter TCPAOBad increased 4 => 8
> ok 12 TCP-AO with wrong receive ISN: counter TCPAOBad increased 5 => 10
> ok 13 TCP-AO with wrong send SEQ ext number: server couldn't serve
> ok 14 TCP-AO with wrong send SEQ ext number: post-migrate connection is broken
> ok 15 TCP-AO with wrong send SEQ ext number: counter TCPAOBad increased 9 => 10
> ok 16 TCP-AO with wrong send SEQ ext number: counter TCPAOBad increased 11 => 19
> ok 17 TCP-AO with wrong receive SEQ ext number: post-migrate connection is broken
> ok 18 TCP-AO with wrong receive SEQ ext number: server couldn't serve
> ok 19 TCP-AO with wrong receive SEQ ext number: counter TCPAOBad increased 10 => 18
> ok 20 TCP-AO with wrong receive SEQ ext number: counter TCPAOBad increased 20 => 23
> # Totals: pass:20 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sample output:
> 1..36
> # 1106[lib/setup.c:207] rand seed 1660754406
> TAP version 13
> ok 1 Worst case connect 512 keys: min=0ms max=1ms mean=0.583329ms stddev=0.076376
> ok 2 Connect random-search 512 keys: min=0ms max=1ms mean=0.53412ms stddev=0.0516779
> ok 3 Worst case delete 512 keys: min=2ms max=11ms mean=6.04139ms stddev=0.245792
> ok 4 Add a new key 512 keys: min=0ms max=13ms mean=0.673415ms stddev=0.0820618
> ok 5 Remove random-search 512 keys: min=5ms max=9ms mean=6.65969ms stddev=0.258064
> ok 6 Remove async 512 keys: min=0ms max=0ms mean=0.041825ms stddev=0.0204512
> ok 7 Worst case connect 1024 keys: min=0ms max=2ms mean=0.520357ms stddev=0.0721358
> ok 8 Connect random-search 1024 keys: min=0ms max=2ms mean=0.535312ms stddev=0.0517355
> ok 9 Worst case delete 1024 keys: min=5ms max=9ms mean=8.27219ms stddev=0.287614
> ok 10 Add a new key 1024 keys: min=0ms max=1ms mean=0.688121ms stddev=0.0829531
> ok 11 Remove random-search 1024 keys: min=5ms max=9ms mean=8.37649ms stddev=0.289422
> ok 12 Remove async 1024 keys: min=0ms max=0ms mean=0.0457096ms stddev=0.0213798
> ok 13 Worst case connect 2048 keys: min=0ms max=2ms mean=0.748804ms stddev=0.0865335
> ok 14 Connect random-search 2048 keys: min=0ms max=2ms mean=0.782993ms stddev=0.0625697
> ok 15 Worst case delete 2048 keys: min=5ms max=10ms mean=8.23106ms stddev=0.286898
> ok 16 Add a new key 2048 keys: min=0ms max=1ms mean=0.812988ms stddev=0.0901658
> ok 17 Remove random-search 2048 keys: min=8ms max=9ms mean=8.84949ms stddev=0.297481
> ok 18 Remove async 2048 keys: min=0ms max=0ms mean=0.0297223ms stddev=0.0172402
> ok 19 Worst case connect 4096 keys: min=1ms max=5ms mean=1.53352ms stddev=0.123836
> ok 20 Connect random-search 4096 keys: min=1ms max=5ms mean=1.52226ms stddev=0.0872429
> ok 21 Worst case delete 4096 keys: min=5ms max=9ms mean=8.25874ms stddev=0.28738
> ok 22 Add a new key 4096 keys: min=0ms max=3ms mean=1.67382ms stddev=0.129376
> ok 23 Remove random-search 4096 keys: min=5ms max=10ms mean=8.26178ms stddev=0.287433
> ok 24 Remove async 4096 keys: min=0ms max=0ms mean=0.0340009ms stddev=0.0184393
> ok 25 Worst case connect 8192 keys: min=2ms max=4ms mean=2.86208ms stddev=0.169177
> ok 26 Connect random-search 8192 keys: min=2ms max=4ms mean=2.87592ms stddev=0.119915
> ok 27 Worst case delete 8192 keys: min=6ms max=11ms mean=7.55291ms stddev=0.274826
> ok 28 Add a new key 8192 keys: min=1ms max=5ms mean=2.56797ms stddev=0.160249
> ok 29 Remove random-search 8192 keys: min=5ms max=10ms mean=7.14002ms stddev=0.267208
> ok 30 Remove async 8192 keys: min=0ms max=0ms mean=0.0320066ms stddev=0.0178904
> ok 31 Worst case connect 16384 keys: min=5ms max=6ms mean=5.55334ms stddev=0.235655
> ok 32 Connect random-search 16384 keys: min=5ms max=6ms mean=5.52614ms stddev=0.166225
> ok 33 Worst case delete 16384 keys: min=5ms max=11ms mean=7.39109ms stddev=0.271866
> ok 34 Add a new key 16384 keys: min=2ms max=4ms mean=3.35799ms stddev=0.183248
> ok 35 Remove random-search 16384 keys: min=5ms max=8ms mean=6.86078ms stddev=0.261931
> ok 36 Remove async 16384 keys: min=0ms max=0ms mean=0.0302384ms stddev=0.0173892
> # Totals: pass:36 fail:0 xfail:0 xpass:0 skip:0 error:0
>From the output it's visible that the current simplified approach with
linked-list of MKTs scales quite fine even for thousands of keys.
And that also means that the majority of the time for delete is eaten by
synchronize_rcu() [which I can confirm separately by tracing].
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The test plan was (most of tests have all 3 client types):
1. TCP-AO listen (INADDR_ANY)
2. TCP-MD5 listen (INADDR_ANY)
3. non-signed listen (INADDR_ANY)
4. TCP-AO + TCP-MD5 listen (prefix)
5. TCP-AO subprefix add failure [checked in setsockopt-closed.c]
6. TCP-AO out of prefix connect [checked in connect-deny.c]
7. TCP-AO + TCP-MD5 on connect()
8. TCP-AO intersect with TCP-MD5 failure
9. Established TCP-AO: add TCP-MD5 key
10. Established TCP-MD5: add TCP-AO key
11. Established non-signed: add TCP-AO key
Output produced:
> # ./unsigned-md5_ipv6
> 1..72
> # 1592[lib/setup.c:239] rand seed 1697567046
> TAP version 13
> ok 1 AO server (INADDR_ANY): AO client: counter TCPAOGood increased 0 => 2
> ok 2 AO server (INADDR_ANY): AO client: connected
> ok 3 AO server (INADDR_ANY): MD5 client
> ok 4 AO server (INADDR_ANY): MD5 client: counter TCPMD5Unexpected increased 0 => 1
> ok 5 AO server (INADDR_ANY): no sign client: counter TCPAORequired increased 0 => 1
> ok 6 AO server (INADDR_ANY): unsigned client
> ok 7 AO server (AO_REQUIRED): AO client: connected
> ok 8 AO server (AO_REQUIRED): AO client: counter TCPAOGood increased 4 => 6
> ok 9 AO server (AO_REQUIRED): unsigned client
> ok 10 AO server (AO_REQUIRED): unsigned client: counter TCPAORequired increased 1 => 2
> ok 11 MD5 server (INADDR_ANY): AO client: counter TCPAOKeyNotFound increased 0 => 1
> ok 12 MD5 server (INADDR_ANY): AO client
> ok 13 MD5 server (INADDR_ANY): MD5 client: connected
> ok 14 MD5 server (INADDR_ANY): MD5 client: no counter checks
> ok 15 MD5 server (INADDR_ANY): no sign client
> ok 16 MD5 server (INADDR_ANY): no sign client: counter TCPMD5NotFound increased 0 => 1
> ok 17 no sign server: AO client
> ok 18 no sign server: AO client: counter TCPAOKeyNotFound increased 1 => 2
> ok 19 no sign server: MD5 client
> ok 20 no sign server: MD5 client: counter TCPMD5Unexpected increased 1 => 2
> ok 21 no sign server: no sign client: connected
> ok 22 no sign server: no sign client: counter CurrEstab increased 0 => 1
> ok 23 AO+MD5 server: AO client (matching): connected
> ok 24 AO+MD5 server: AO client (matching): counter TCPAOGood increased 8 => 10
> ok 25 AO+MD5 server: AO client (misconfig, matching MD5)
> ok 26 AO+MD5 server: AO client (misconfig, matching MD5): counter TCPAOKeyNotFound increased 2 => 3
> ok 27 AO+MD5 server: AO client (misconfig, non-matching): counter TCPAOKeyNotFound increased 3 => 4
> ok 28 AO+MD5 server: AO client (misconfig, non-matching)
> ok 29 AO+MD5 server: MD5 client (matching): connected
> ok 30 AO+MD5 server: MD5 client (matching): no counter checks
> ok 31 AO+MD5 server: MD5 client (misconfig, matching AO)
> ok 32 AO+MD5 server: MD5 client (misconfig, matching AO): counter TCPMD5Unexpected increased 2 => 3
> ok 33 AO+MD5 server: MD5 client (misconfig, non-matching)
> ok 34 AO+MD5 server: MD5 client (misconfig, non-matching): counter TCPMD5Unexpected increased 3 => 4
> ok 35 AO+MD5 server: no sign client (unmatched): connected
> ok 36 AO+MD5 server: no sign client (unmatched): counter CurrEstab increased 0 => 1
> ok 37 AO+MD5 server: no sign client (misconfig, matching AO)
> ok 38 AO+MD5 server: no sign client (misconfig, matching AO): counter TCPAORequired increased 2 => 3
> ok 39 AO+MD5 server: no sign client (misconfig, matching MD5)
> ok 40 AO+MD5 server: no sign client (misconfig, matching MD5): counter TCPMD5NotFound increased 1 => 2
> ok 41 AO+MD5 server: client with both [TCP-MD5] and TCP-AO keys: connect() was prevented
> ok 42 AO+MD5 server: client with both [TCP-MD5] and TCP-AO keys: no counter checks
> ok 43 AO+MD5 server: client with both TCP-MD5 and [TCP-AO] keys: connect() was prevented
> ok 44 AO+MD5 server: client with both TCP-MD5 and [TCP-AO] keys: no counter checks
> ok 45 TCP-AO established: add TCP-MD5 key: postfailed as expected
> ok 46 TCP-AO established: add TCP-MD5 key: counter TCPAOGood increased 12 => 14
> ok 47 TCP-MD5 established: add TCP-AO key: postfailed as expected
> ok 48 TCP-MD5 established: add TCP-AO key: no counter checks
> ok 49 non-signed established: add TCP-AO key: postfailed as expected
> ok 50 non-signed established: add TCP-AO key: counter CurrEstab increased 0 => 1
> ok 51 TCP-AO key intersects with existing TCP-MD5 key: prefailed as expected: Key was rejected by service
> ok 52 TCP-MD5 key intersects with existing TCP-AO key: prefailed as expected: Key was rejected by service
> ok 53 TCP-MD5 key + TCP-AO required: prefailed as expected: Key was rejected by service
> ok 54 TCP-AO required on socket + TCP-MD5 key: prefailed as expected: Key was rejected by service
> ok 55 VRF: TCP-AO key (no l3index) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service
> ok 56 VRF: TCP-MD5 key (no l3index) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service
> ok 57 VRF: TCP-AO key (no l3index) + TCP-MD5 key (l3index=0): prefailed as expected: Key was rejected by service
> ok 58 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service
> ok 59 VRF: TCP-AO key (no l3index) + TCP-MD5 key (l3index=N): prefailed as expected: Key was rejected by service
> ok 60 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service
> ok 61 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service
> ok 62 VRF: TCP-MD5 key (no l3index) + TCP-AO key (l3index=0): prefailed as expected: Key was rejected by service
> ok 63 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (l3index=0): prefailed as expected: Key was rejected by service
> ok 64 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (l3index=0): prefailed as expected: Key was rejected by service
> ok 65 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (l3index=N)
> ok 66 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (l3index=0)
> ok 67 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service
> ok 68 VRF: TCP-MD5 key (no l3index) + TCP-AO key (l3index=N): prefailed as expected: Key was rejected by service
> ok 69 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (l3index=0)
> ok 70 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (l3index=N)
> ok 71 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (l3index=N): prefailed as expected: Key was rejected by service
> ok 72 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (l3index=N): prefailed as expected: Key was rejected by service
> # Totals: pass:72 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Verify corner-cases for UAPI.
Sample output:
> # ./setsockopt-closed_ipv4
> 1..120
> # 1657[lib/setup.c:254] rand seed 1681938184
> TAP version 13
> ok 1 AO add: minimum size
> ok 2 AO add: extended size
> ok 3 AO add: null optval
> ok 4 AO del: minimum size
> ok 5 AO del: extended size
> ok 6 AO del: null optval
> ok 7 AO set info: minimum size
> ok 8 AO set info: extended size
> ok 9 AO info get: : extended size
> ok 10 AO set info: null optval
> ok 11 AO get info: minimum size
> ok 12 AO get info: extended size
> ok 13 AO get info: null optval
> ok 14 AO get info: null optlen
> ok 15 AO get keys: minimum size
> ok 16 AO get keys: extended size
> ok 17 AO get keys: null optval
> ok 18 AO get keys: null optlen
> ok 19 key add: too big keylen
> ok 20 key add: using reserved padding
> ok 21 key add: using reserved2 padding
> ok 22 key add: wrong address family
> ok 23 key add: port (unsupported)
> ok 24 key add: no prefix, addr
> ok 25 key add: no prefix, any addr
> ok 26 key add: prefix, any addr
> ok 27 key add: too big prefix
> ok 28 key add: too short prefix
> ok 29 key add: bad key flags
> ok 30 key add: add current key on a listen socket
> ok 31 key add: add rnext key on a listen socket
> ok 32 key add: add current+rnext key on a listen socket
> ok 33 key add: add key and set as current
> ok 34 key add: add key and set as rnext
> ok 35 key add: add key and set as current+rnext
> ok 36 key add: ifindex without TCP_AO_KEYF_IFNINDEX
> ok 37 key add: non-existent VRF
> ok 38 optmem limit was hit on adding 69 key
> ok 39 key add: maclen bigger than TCP hdr
> ok 40 key add: bad algo
> ok 41 key del: using reserved padding
> ok 42 key del: using reserved2 padding
> ok 43 key del: del and set current key on a listen socket
> ok 44 key del: del and set rnext key on a listen socket
> ok 45 key del: del and set current+rnext key on a listen socket
> ok 46 key del: bad key flags
> ok 47 key del: ifindex without TCP_AO_KEYF_IFNINDEX
> ok 48 key del: non-existent VRF
> ok 49 key del: set non-exising current key
> ok 50 key del: set non-existing rnext key
> ok 51 key del: set non-existing current+rnext key
> ok 52 key del: set current key
> ok 53 key del: set rnext key
> ok 54 key del: set current+rnext key
> ok 55 key del: set as current key to be removed
> ok 56 key del: set as rnext key to be removed
> ok 57 key del: set as current+rnext key to be removed
> ok 58 key del: async on non-listen
> ok 59 key del: non-existing sndid
> ok 60 key del: non-existing rcvid
> ok 61 key del: incorrect addr
> ok 62 key del: correct key delete
> ok 63 AO info set: set current key on a listen socket
> ok 64 AO info set: set rnext key on a listen socket
> ok 65 AO info set: set current+rnext key on a listen socket
> ok 66 AO info set: using reserved padding
> ok 67 AO info set: using reserved2 padding
> ok 68 AO info set: accept_icmps
> ok 69 AO info get: accept_icmps
> ok 70 AO info set: ao required
> ok 71 AO info get: ao required
> ok 72 AO info set: ao required with MD5 key
> ok 73 AO info set: set non-existing current key
> ok 74 AO info set: set non-existing rnext key
> ok 75 AO info set: set non-existing current+rnext key
> ok 76 AO info set: set current key
> ok 77 AO info get: set current key
> ok 78 AO info set: set rnext key
> ok 79 AO info get: set rnext key
> ok 80 AO info set: set current+rnext key
> ok 81 AO info get: set current+rnext key
> ok 82 AO info set: set counters
> ok 83 AO info get: set counters
> ok 84 AO info set: no-op
> ok 85 AO info get: no-op
> ok 86 get keys: no ao_info
> ok 87 get keys: proper tcp_ao_get_mkts()
> ok 88 get keys: set out-only pkt_good counter
> ok 89 get keys: set out-only pkt_bad counter
> ok 90 get keys: bad keyflags
> ok 91 get keys: ifindex without TCP_AO_KEYF_IFNINDEX
> ok 92 get keys: using reserved field
> ok 93 get keys: no prefix, addr
> ok 94 get keys: no prefix, any addr
> ok 95 get keys: prefix, any addr
> ok 96 get keys: too big prefix
> ok 97 get keys: too short prefix
> ok 98 get keys: prefix + addr
> ok 99 get keys: get_all + prefix
> ok 100 get keys: get_all + addr
> ok 101 get keys: get_all + sndid
> ok 102 get keys: get_all + rcvid
> ok 103 get keys: current + prefix
> ok 104 get keys: current + addr
> ok 105 get keys: current + sndid
> ok 106 get keys: current + rcvid
> ok 107 get keys: rnext + prefix
> ok 108 get keys: rnext + addr
> ok 109 get keys: rnext + sndid
> ok 110 get keys: rnext + rcvid
> ok 111 get keys: get_all + current
> ok 112 get keys: get_all + rnext
> ok 113 get keys: current + rnext
> ok 114 key add: duplicate: full copy
> ok 115 key add: duplicate: any addr key on the socket
> ok 116 key add: duplicate: add any addr key
> ok 117 key add: duplicate: add any addr for the same subnet
> ok 118 key add: duplicate: full copy of a key
> ok 119 key add: duplicate: RecvID differs
> ok 120 key add: duplicate: SendID differs
> # Totals: pass:120 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add TCP-AO tests on connect()/accept() pair.
SNMP counters exposed by kernel are very useful here to verify the
expected behavior of TCP-AO.
Expected output for ipv4 version:
> # ./connect-deny_ipv4
> 1..19
> # 1702[lib/setup.c:254] rand seed 1680553689
> TAP version 13
> ok 1 Non-AO server + AO client
> ok 2 Non-AO server + AO client: counter TCPAOKeyNotFound increased 0 => 1
> ok 3 AO server + Non-AO client
> ok 4 AO server + Non-AO client: counter TCPAORequired increased 0 => 1
> ok 5 Wrong password
> ok 6 Wrong password: counter TCPAOBad increased 0 => 1
> ok 7 Wrong rcv id
> ok 8 Wrong rcv id: counter TCPAOKeyNotFound increased 1 => 2
> ok 9 Wrong snd id
> ok 10 Wrong snd id: counter TCPAOGood increased 0 => 1
> ok 11 Server: Wrong addr: counter TCPAOKeyNotFound increased 2 => 3
> ok 12 Server: Wrong addr
> ok 13 Client: Wrong addr: connect() was prevented
> ok 14 rcv id != snd id: connected
> ok 15 rcv id != snd id: counter TCPAOGood increased 1 => 3
> ok 16 Server: prefix match: connected
> ok 17 Server: prefix match: counter TCPAOGood increased 4 => 6
> ok 18 Client: prefix match: connected
> ok 19 Client: prefix match: counter TCPAOGood increased 7 => 9
> # Totals: pass:19 fail:0 xfail:0 xpass:0 skip:0 error:0
Expected output for ipv6 version:
> # ./connect-deny_ipv6
> 1..19
> # 1725[lib/setup.c:254] rand seed 1680553711
> TAP version 13
> ok 1 Non-AO server + AO client
> ok 2 Non-AO server + AO client: counter TCPAOKeyNotFound increased 0 => 1
> ok 3 AO server + Non-AO client: counter TCPAORequired increased 0 => 1
> ok 4 AO server + Non-AO client
> ok 5 Wrong password: counter TCPAOBad increased 0 => 1
> ok 6 Wrong password
> ok 7 Wrong rcv id: counter TCPAOKeyNotFound increased 1 => 2
> ok 8 Wrong rcv id
> ok 9 Wrong snd id: counter TCPAOGood increased 0 => 1
> ok 10 Wrong snd id
> ok 11 Server: Wrong addr
> ok 12 Server: Wrong addr: counter TCPAOKeyNotFound increased 2 => 3
> ok 13 Client: Wrong addr: connect() was prevented
> ok 14 rcv id != snd id: connected
> ok 15 rcv id != snd id: counter TCPAOGood increased 1 => 3
> ok 16 Server: prefix match: connected
> ok 17 Server: prefix match: counter TCPAOGood increased 5 => 7
> ok 18 Client: prefix match: connected
> ok 19 Client: prefix match: counter TCPAOGood increased 8 => 10
> # Totals: pass:19 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reverse to icmps-discard test: the server accepts ICMPs, using
TCP_AO_CMDF_ACCEPT_ICMP and it is expected to fail under ICMP
flood from client. Test that the default pre-TCP-AO behaviour functions
when TCP_AO_CMDF_ACCEPT_ICMP is set.
Expected output for ipv4 version (in case it receives ICMP_PROT_UNREACH):
> # ./icmps-accept_ipv4
> 1..3
> # 3209[lib/setup.c:166] rand seed 1642623870
> TAP version 13
> # 3209[lib/proc.c:207] Snmp6 Ip6InReceives: 0 => 1
> # 3209[lib/proc.c:207] Snmp6 Ip6InNoRoutes: 0 => 1
> # 3209[lib/proc.c:207] Snmp6 Ip6InOctets: 0 => 76
> # 3209[lib/proc.c:207] Snmp6 Ip6InNoECTPkts: 0 => 1
> # 3209[lib/proc.c:207] Tcp InSegs: 3 => 23
> # 3209[lib/proc.c:207] Tcp OutSegs: 2 => 22
> # 3209[lib/proc.c:207] IcmpMsg InType3: 0 => 4
> # 3209[lib/proc.c:207] Icmp InMsgs: 0 => 4
> # 3209[lib/proc.c:207] Icmp InDestUnreachs: 0 => 4
> # 3209[lib/proc.c:207] Ip InReceives: 3 => 27
> # 3209[lib/proc.c:207] Ip InDelivers: 3 => 27
> # 3209[lib/proc.c:207] Ip OutRequests: 2 => 22
> # 3209[lib/proc.c:207] IpExt InOctets: 288 => 3420
> # 3209[lib/proc.c:207] IpExt OutOctets: 124 => 3244
> # 3209[lib/proc.c:207] IpExt InNoECTPkts: 3 => 25
> # 3209[lib/proc.c:207] TcpExt TCPPureAcks: 1 => 2
> # 3209[lib/proc.c:207] TcpExt TCPOrigDataSent: 0 => 20
> # 3209[lib/proc.c:207] TcpExt TCPDelivered: 0 => 19
> # 3209[lib/proc.c:207] TcpExt TCPAOGood: 3 => 23
> ok 1 InDestUnreachs delivered 4
> ok 2 server failed with -92: Protocol not available
> ok 3 TCPAODroppedIcmps counter didn't change: 0 >= 0
> # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Expected output for ipv6 version (in case it receives ADM_PROHIBITED):
> # ./icmps-accept_ipv6
> 1..3
> # 3277[lib/setup.c:166] rand seed 1642624035
> TAP version 13
> # 3277[lib/proc.c:207] Snmp6 Ip6InReceives: 6 => 31
> # 3277[lib/proc.c:207] Snmp6 Ip6InDelivers: 4 => 29
> # 3277[lib/proc.c:207] Snmp6 Ip6OutRequests: 4 => 24
> # 3277[lib/proc.c:207] Snmp6 Ip6InOctets: 592 => 4492
> # 3277[lib/proc.c:207] Snmp6 Ip6OutOctets: 332 => 3852
> # 3277[lib/proc.c:207] Snmp6 Ip6InNoECTPkts: 6 => 31
> # 3277[lib/proc.c:207] Snmp6 Icmp6InMsgs: 1 => 6
> # 3277[lib/proc.c:207] Snmp6 Icmp6InDestUnreachs: 0 => 5
> # 3277[lib/proc.c:207] Snmp6 Icmp6InType1: 0 => 5
> # 3277[lib/proc.c:207] Tcp InSegs: 3 => 23
> # 3277[lib/proc.c:207] Tcp OutSegs: 2 => 22
> # 3277[lib/proc.c:207] TcpExt TCPPureAcks: 1 => 2
> # 3277[lib/proc.c:207] TcpExt TCPOrigDataSent: 0 => 20
> # 3277[lib/proc.c:207] TcpExt TCPDelivered: 0 => 19
> # 3277[lib/proc.c:207] TcpExt TCPAOGood: 3 => 23
> ok 1 Icmp6InDestUnreachs delivered 5
> ok 2 server failed with -13: Permission denied
> ok 3 TCPAODroppedIcmps counter didn't change: 0 >= 0
> # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
With some luck the server may fail with ECONNREFUSED (depending on what
icmp packet was delivered firstly).
For the kernel error handlers see: tab_unreach[] and icmp_err_convert[].
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hand-crafted ICMP packets are sent to the server, the server checks for
hard/soft errors and fails if any.
Expected output for ipv4 version:
> # ./icmps-discard_ipv4
> 1..3
> # 3164[lib/setup.c:166] rand seed 1642623745
> TAP version 13
> # 3164[lib/proc.c:207] Snmp6 Ip6InReceives: 0 => 1
> # 3164[lib/proc.c:207] Snmp6 Ip6InNoRoutes: 0 => 1
> # 3164[lib/proc.c:207] Snmp6 Ip6InOctets: 0 => 76
> # 3164[lib/proc.c:207] Snmp6 Ip6InNoECTPkts: 0 => 1
> # 3164[lib/proc.c:207] Tcp InSegs: 2 => 203
> # 3164[lib/proc.c:207] Tcp OutSegs: 1 => 202
> # 3164[lib/proc.c:207] IcmpMsg InType3: 0 => 543
> # 3164[lib/proc.c:207] Icmp InMsgs: 0 => 543
> # 3164[lib/proc.c:207] Icmp InDestUnreachs: 0 => 543
> # 3164[lib/proc.c:207] Ip InReceives: 2 => 746
> # 3164[lib/proc.c:207] Ip InDelivers: 2 => 746
> # 3164[lib/proc.c:207] Ip OutRequests: 1 => 202
> # 3164[lib/proc.c:207] IpExt InOctets: 132 => 61684
> # 3164[lib/proc.c:207] IpExt OutOctets: 68 => 31324
> # 3164[lib/proc.c:207] IpExt InNoECTPkts: 2 => 744
> # 3164[lib/proc.c:207] TcpExt TCPPureAcks: 1 => 2
> # 3164[lib/proc.c:207] TcpExt TCPOrigDataSent: 0 => 200
> # 3164[lib/proc.c:207] TcpExt TCPDelivered: 0 => 199
> # 3164[lib/proc.c:207] TcpExt TCPAOGood: 2 => 203
> # 3164[lib/proc.c:207] TcpExt TCPAODroppedIcmps: 0 => 541
> ok 1 InDestUnreachs delivered 543
> ok 2 Server survived 20000 bytes of traffic
> ok 3 ICMPs ignored 541
> # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Expected output for ipv6 version:
> # ./icmps-discard_ipv6
> 1..3
> # 3186[lib/setup.c:166] rand seed 1642623803
> TAP version 13
> # 3186[lib/proc.c:207] Snmp6 Ip6InReceives: 4 => 568
> # 3186[lib/proc.c:207] Snmp6 Ip6InDelivers: 3 => 564
> # 3186[lib/proc.c:207] Snmp6 Ip6OutRequests: 2 => 204
> # 3186[lib/proc.c:207] Snmp6 Ip6InMcastPkts: 1 => 4
> # 3186[lib/proc.c:207] Snmp6 Ip6OutMcastPkts: 0 => 1
> # 3186[lib/proc.c:207] Snmp6 Ip6InOctets: 320 => 70420
> # 3186[lib/proc.c:207] Snmp6 Ip6OutOctets: 160 => 35512
> # 3186[lib/proc.c:207] Snmp6 Ip6InMcastOctets: 72 => 336
> # 3186[lib/proc.c:207] Snmp6 Ip6OutMcastOctets: 0 => 76
> # 3186[lib/proc.c:207] Snmp6 Ip6InNoECTPkts: 4 => 568
> # 3186[lib/proc.c:207] Snmp6 Icmp6InMsgs: 1 => 361
> # 3186[lib/proc.c:207] Snmp6 Icmp6OutMsgs: 1 => 2
> # 3186[lib/proc.c:207] Snmp6 Icmp6InDestUnreachs: 0 => 360
> # 3186[lib/proc.c:207] Snmp6 Icmp6OutMLDv2Reports: 0 => 1
> # 3186[lib/proc.c:207] Snmp6 Icmp6InType1: 0 => 360
> # 3186[lib/proc.c:207] Snmp6 Icmp6OutType143: 0 => 1
> # 3186[lib/proc.c:207] Tcp InSegs: 2 => 203
> # 3186[lib/proc.c:207] Tcp OutSegs: 1 => 202
> # 3186[lib/proc.c:207] TcpExt TCPPureAcks: 1 => 2
> # 3186[lib/proc.c:207] TcpExt TCPOrigDataSent: 0 => 200
> # 3186[lib/proc.c:207] TcpExt TCPDelivered: 0 => 199
> # 3186[lib/proc.c:207] TcpExt TCPAOGood: 2 => 203
> # 3186[lib/proc.c:207] TcpExt TCPAODroppedIcmps: 0 => 360
> ok 1 Icmp6InDestUnreachs delivered 360
> ok 2 Server survived 20000 bytes of traffic
> ok 3 ICMPs ignored 360
> # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Provide functions to create selftests dedicated to TCP-AO.
They can run in parallel, as they use temporary net namespaces.
They can be very specific to the feature being tested.
This will allow to create a lot of TCP-AO tests, without complicating
one binary with many --options and to create scenarios, that are
hard to put in bash script that uses one binary.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Validate the operation of rx and tx histogram counters, if supported
by the interface, by sending batches of packets targeted for each
bucket.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
/proc/sys/net/core/optmem_max is now per netns, change two tests
that were saving/changing/restoring its value on the parent netns.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Here is the test result after conversion.
# ./fdb_flush.sh
TEST: vx10: Expected 5 FDB entries, got 5 [ OK ]
TEST: vx20: Expected 5 FDB entries, got 5 [ OK ]
...
TEST: vx10: Expected 5 FDB entries, got 5 [ OK ]
TEST: Test entries with dst 192.0.2.1 [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-14-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
