| Age | Commit message (Collapse) | Author |
|---|
|
The commit mentioned below was more tolerant with the number of RST seen
during a test because in some uncontrollable situations, multiple RST
can be generated.
But it was not taking into account the case where no RST are expected:
this validation was then no longer reporting issues for the 0 RST case
because it is not possible to have less than 0 RST in the counter. This
patch fixes the issue by adding a specific condition.
Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-1-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/intel/igc/igc_main.c
06b412589eef ("igc: Add lock to safeguard global Qbv variables")
d3750076d464 ("igc: Add TransmissionOverrun counter")
drivers/net/ethernet/microsoft/mana/mana_en.c
a7dfeda6fdec ("net: mana: Fix MANA VF unload when hardware is unresponsive")
a9ca9f9ceff3 ("page_pool: split types and declarations from page_pool.h")
92272ec4107e ("eth: add missing xdp.h includes in drivers")
net/mptcp/protocol.h
511b90e39250 ("mptcp: fix disconnect vs accept race")
b8dc6d6ce931 ("mptcp: fix rcv buffer auto-tuning")
tools/testing/selftests/net/mptcp/mptcp_join.sh
c8c101ae390a ("selftests: mptcp: join: fix 'implicit EP' test")
03668c65d153 ("selftests: mptcp: join: rework detailed report")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mptcp_join 'implicit EP' test currently fails when using ip mptcp:
$ ./mptcp_join.sh -iI
<snip>
001 implicit EP creation[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 '
Error: too many addresses or duplicate one: -22.
ID change is prevented[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 '
modif is allowed[fail] expected '10.0.2.2 10.0.2.2 id 1 signal' found '10.0.2.2 id 1 signal '
This happens because of two reasons:
- iproute v6.3.0 does not support the implicit flag, fixed with
iproute2-next commit 3a2535a41854 ("mptcp: add support for implicit
flag")
- pm_nl_check_endpoint wrongly expects the ip address to be repeated two
times in iproute output, and does not account for a final whitespace
in it.
This fixes the issue trimming the whitespace in the output string and
removing the double address in the expected string.
Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-2-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mptcp_join 'delete and re-add' test fails when using ip mptcp:
$ ./mptcp_join.sh -iI
<snip>
002 delete and re-add before delete[ ok ]
mptcp_info subflows=1 [ ok ]
Error: argument "ADDRESS" is wrong: invalid for non-zero id address
after delete[fail] got 2:2 subflows expected 1
This happens because endpoint delete includes an ip address while id is
not 0, contrary to what is indicated in the ip mptcp man page:
"When used with the delete id operation, an IFADDR is only included when
the ID is 0."
This fixes the issue using the $addr variable in pm_nl_del_endpoint()
only when id is 0.
Fixes: 34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-1-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All pm_nl_ctl commands were muted. If there was an unexpected error with
one of them, this was simply not visible in the logs, making the
analysis very hard. It could also hide misuse of commands by mistake.
Now the output is only muted when we do expect to have an error, e.g.
when giving invalid arguments on purpose.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-4-7e9cc530a9cd@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a Netlink command for the MPTCP path-managers is not valid, it is
important to check if there are errors. If yes, they need to be reported
instead of being ignored and exiting without errors.
Now if no replies are expected, an ACK from the kernelspace is asked by
the userspace in order to always expect a reply. We can use the same
buffer that is currently always >1024 bytes. Then we can check if there
is an error (err->error), print it if any and report the error.
After this modification, it is required to mute expected errors in
mptcp_join.sh and pm_netlink.sh selftests:
- when trying to add a bad endpoint, e.g. duplicated
- when trying to set the two limits above the hard limit
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-3-7e9cc530a9cd@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Thanks to the parent commit, it is easy to change the output and add
some colours to help spotting issues.
The colours are not used if stdout is redirected or if NO_COLOR env var
is set to 1 as specified in https://no-color.org.
It is possible to force displaying the colours even if stdout is
redirected by setting this env var:
SELFTESTS_MPTCP_LIB_COLOR_FORCE=1
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-2-7e9cc530a9cd@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch modifies how the detailed results are printed, mainly to
improve what is displayed in case of issue:
- Now the test name (title) is printed earlier, when starting the test
if it is not intentionally skipped: by doing that, errors linked to
a test will be printed after having written the test name and then
avoid confusions.
- Due to the previous item, it is required to add a new line after
having printed the test name because in case of error with a command,
it is better not to have the output in the middle of the screen.
- Each check is printed on a dedicated line with aligned status (ok,
skip, fail): it is easier to spot which one has failed, simpler to
manage in the code not having to deal with alignment case by case and
helpers can be used to uniform what is done. These helpers can also be
useful later to do more actions depending on the results or change in
one place what is printed.
- Info messages have been reduced and aligned as well. And info messages
about the creation of the default test files of 1 KB are no longer
printed.
Example:
001 no JOIN
syn [ ok ]
synack [ ok ]
ack [ ok ]
Or with a skip and a failure:
001 no JOIN
syn [ ok ]
synack [fail] got 42 JOIN[s] synack expected 0
Server ns stats
(...)
Client ns stats
(...)
ack [skip]
Or with info:
104 Infinite map
Test file (size 128 KB) for client
Test file (size 128 KB) for server
file received by server has inverted byte at 169
5 corrupted pkts
syn [ ok ]
synack [ ok ]
While at it, verify_listener_events() now also print more info in case
of failure and in pm_nl_check_endpoint(), the test is marked as failed
instead of skipped if no ID has been given (internal selftest issue).
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-1-7e9cc530a9cd@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If 'iptables-legacy' is available, 'ip6tables-legacy' command will be
used instead of 'ip6tables'. So no need to look if 'ip6tables' is
available in this case.
Cc: stable@vger.kernel.org
Fixes: 0c4cd3f86a40 ("selftests: mptcp: join: use 'iptables-legacy' if available")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230725-send-net-20230725-v1-1-6f60fe7137a9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in userspace_pm.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in mptcp_sockopt.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in simult_flows.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in diag.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in mptcp_join.sh selftest.
In this selftest and before starting each subtest, the 'reset' function
is called. We can then check if the previous test has passed, failed or
has been skipped from there.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in pm_netlink.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in mptcp_connect.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch adds some helpers in mptcp_lib.sh to be able to easily format
subtests results in TAP in the different MPTCP selftests.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In this selftest, "printf" is always used with "stdbuf".
With a new helper, it is possible to call "stdbuf" only from one place.
This makes the code a bit clearer to read.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are a few reasons to do that:
- When the tabs are not printed as 8 spaces, some results were not
properly aligned
- Some lines printing the test name were very long due to the use of a
lot of spaces/tabs at the end and stdbuf at the beginning.
- To reduce duplicated code, e.g. to print what has failed and set the
status
But by centralising how the test results are printed, this also prepares
future commits to avoid more duplicated code and ease the tracking of
the different subtests.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
shellcheck recently helped to find an issue where a wrong variable name
was used. It is then good to fix the other harmless issues in order to
spot "real" ones later.
Here, three categories of warnings are ignored:
- SC2317: Command appears to be unreachable. The cleanup() function is
invoke indirectly via the EXIT trap.
- SC2034: Variable appears unused. The check_expected_one() function
takes the name of the variable in argument but it ends up reading the
content: indirect usage.
- SC2086: Double quote to prevent globbing and word splitting. This is
recommended but the current usage is correct and there is no need to
do all these modifications to be compliant with this rule.
One error has been fixed with SC2181: Check exit code directly with e.g.
'if ! mycmd;', not indirectly with $?.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No more tests were executed after a failure but it is still interesting
to get results for all the tests to better understand what's still OK
and what's not after a modification.
Now we only exit earlier if the two connections cannot be established.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No more tests were executed after a failure but it is still interesting
to get results for all the tests to better understand what's still OK
and what's not after a modification.
Now we only exit earlier if the basic tests are failing: no ping going
through namespaces or unable to transfer data on the loopback interface.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use a new env var speed instead of using 'speed' argument of run_tests()
and do_transfer(). It can be set with 'fast', 'slow', or the actual speed
number:
run_tests $ns1 $ns2 10.0.1.1 slow
->
speed=slow \
run_tests $ns1 $ns2 10.0.1.1.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230712-upstream-net-next-20230712-selftests-mptcp-use-local-env-v1-4-f1c8b62fbf95@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use a new env var fullmesh instead of passing 'fullmesh_*' to addr_nr_ns2.
It can be set with the actual value of addr_nr_ns2 now:
addr_nr_ns2=fullmesh_1 \
run_tests $ns1 $ns2 10.0.1.1
->
fullmesh=1 \
run_tests $ns1 $ns2 10.0.1.1.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230712-upstream-net-next-20230712-selftests-mptcp-use-local-env-v1-3-f1c8b62fbf95@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use a new env var fastclose instead of passing fastclose to addr_nr_ns2.
It can be set with 'server' or 'client':
addr_nr_ns2=fastclose_client \
run_tests $ns1 $ns2 10.0.1.1
->
fastclose=client \
run_tests $ns1 $ns2 10.0.1.1.
With this change, the fullmesh flag setting code can be moved into
pm_nl_set_endpoint() from do_transfer().
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230712-upstream-net-next-20230712-selftests-mptcp-use-local-env-v1-2-f1c8b62fbf95@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It would be better to move the declaration of all the env variables to
do_transfer(), run_tests(), or pm_nl_set_endpoint() as local variables,
instead of exporting them globally at the beginning of the file.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230712-upstream-net-next-20230712-selftests-mptcp-use-local-env-v1-1-f1c8b62fbf95@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When using pm_nl_ctl to validate userspace path-manager's behaviours, it
was failing on 32-bit architectures ~half of the time.
pm_nl_ctl was not reporting any error but the command was not doing what
it was expected to do. As a result, the expected linked event was not
triggered after and the test failed.
This is due to the fact the token given in argument to the application
was parsed as an integer with atoi(): in a 32-bit arch, if the number
was bigger than INT_MAX, 2147483647 was used instead.
This can simply be fixed by using strtoul() instead of atoi().
The errors have been seen "by chance" when manually looking at the
results from LKFT.
Fixes: 9a0b36509df0 ("selftests: mptcp: support MPTCP_PM_CMD_ANNOUNCE")
Cc: stable@vger.kernel.org
Fixes: ecd2a77d672f ("selftests: mptcp: support MPTCP_PM_CMD_REMOVE")
Fixes: cf8d0a6dfd64 ("selftests: mptcp: support MPTCP_PM_CMD_SUBFLOW_CREATE")
Fixes: 57cc361b8d38 ("selftests: mptcp: support MPTCP_PM_CMD_SUBFLOW_DESTROY")
Fixes: ca188a25d43f ("selftests: mptcp: userspace PM support for MP_PRIO signals")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MPTCP selftests are using TCP SYN Cookies for quite a while now, since
v5.9.
Some CIs don't have this config option enabled and this is causing
issues in the tests:
# ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 167ms) sysctl: cannot stat /proc/sys/net/ipv4/tcp_syncookies: No such file or directory
# [ OK ]./mptcp_connect.sh: line 554: [: -eq: unary operator expected
There is no impact in the results but the test is not doing what it is
supposed to do.
Fixes: fed61c4b584c ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A message was mentioning an issue with the "remove" tests but the
selftest was not marked as failed.
Directly exit with an error like it is done everywhere else in this
selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 259a834fadda ("selftests: mptcp: functional tests for the userspace PM type")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
"server4_port" variable is not set but "app4_port" is the server port in
v4 and the correct variable name to use.
The port is optional so there was no visible impact.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ca188a25d43f ("selftests: mptcp: userspace PM support for MP_PRIO signals")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When an error was detected when checking the marks, a message was
correctly printed mentioning the error but followed by another one
saying everything was OK and the selftest was not marked as failed as
expected.
Now the 'ret' variable is directly set to 1 in order to make sure the
exit is done with an error, similar to what is done in other functions.
While at it, the error is correctly propagated to the caller.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: dc65fe82fb07 ("selftests: mptcp: add packet mark test case")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IPTables commands using 'iptables-nft' fail on old kernels, at least
on v5.15 because it doesn't see the default IPTables chains:
$ iptables -L
iptables/1.8.2 Failed to initialize nft: Protocol not supported
As a first step before switching to NFTables, we can use iptables-legacy
if available.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: dc65fe82fb07 ("selftests: mptcp: add packet mark test case")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case of "external" errors when preparing the environment for the
TProxy tests, the subtests were marked as skipped.
This is fine but it means these errors are ignored. On MPTCP Public CI,
we do want to catch such issues and mark the selftest as failed if there
are such issues. We can then use mptcp_lib_fail_if_expected_feature()
helper that has been recently added to fail if needed.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 5fb62e9cd3ad ("selftests: mptcp: add tproxy test case")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Spell "transmissions" properly.
Found by searching for keyword "tranm".
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Yueh-Shun Li <shamrocklee@posteo.net>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-8-a883213c8ba9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch moves endpoint settings out of do_transfer() into a new
helper pm_nl_set_endpoint(). And invoke this helper in do_transfer().
This makes the code much more clearer.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-7-a883213c8ba9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
run_tests() accepts too many optional parameters. Before this modification,
it was required to set all of then when only the last one had to be
changed. That's not clear to see all these 0 and it makes the maintenance
harder:
run_tests $ns1 $ns2 10.0.1.1 1 2 3 slow
Instead, the parameter can be set as an env var with a limited scope:
foo=1 bar=2 next=3 \
run_tests $ns1 $ns2 10.0.1.1 slow
This patch switches to key/value "sflags=*" instead of positional parameter
sflags of do_transfer() and run_tests().
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-6-a883213c8ba9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
run_tests() accepts too many optional parameters. Before this modification,
it was required to set all of then when only the last one had to be
changed. That's not clear to see all these 0 and it makes the maintenance
harder:
run_tests $ns1 $ns2 10.0.1.1 1 2 3 slow
Instead, the parameter can be set as an env var with a limited scope:
foo=1 bar=2 next=3 \
run_tests $ns1 $ns2 10.0.1.1 slow
This patch switches to key/value "addr_nr_ns1=*, addr_nr_ns2=*" instead
of positional parameters addr_nr_ns1 and addr_nr_ns2 of do_transfer()
and run_tests().
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-5-a883213c8ba9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
run_tests() accepts too many optional parameters. Before this modification,
it was required to set all of then when only the last one had to be
changed. That's not clear to see all these 0 and it makes the maintenance
harder:
run_tests $ns1 $ns2 10.0.1.1 1 2 3 slow
Instead, the parameter can be set as an env var with a limited scope:
foo=1 bar=2 next=3 \
run_tests $ns1 $ns2 10.0.1.1 slow
This patch switches to key/value "test_linkfail=*" instead of positional
parameter test_linkfail of do_transfer() and run_tests().
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-4-a883213c8ba9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Set FAILING_LINKS as an env var with a limited scope only when calling
run_tests().
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-3-a883213c8ba9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New MPTCP info are being checked in multiple places to improve the code
coverage when using the userspace PM.
This patch makes chk_mptcp_info() more generic to be able to check
subflows, add_addr_signal and add_addr_accepted info (and even more
later). New arguments are now required to get different infos from the
two namespaces because some counters are specific to the client or the
server.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-2-a883213c8ba9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch moves userspace pm tests out of do_transfer(). Move add address
test into a new function userspace_pm_add_addr(), and remove address test
into userspace_pm_rm_sf_addr_ns1(). Move add subflow test into
userspace_pm_add_sf() and remove subflow into
userspace_pm_rm_sf_addr_ns2().
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-1-a883213c8ba9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the MPTCP MIB counters introduced in commit fc518953bc9c
("mptcp: add and use MIB counter infrastructure") and more later. The
MPTCP Join selftest heavily relies on these counters.
If a counter is not supported by the kernel, it is not displayed when
using 'nstat -z'. We can then detect that and skip the verification. A
new helper (get_counter()) has been added recently in the -net tree to
do the required checks and return an error if the counter is not
available.
This commit is similar to the one with the same title applied in the
-net tree but it modifies code only present in net-next for the moment,
see the Fixes commit below.
While at it, we can also remove the use of ${extra_msg} variable which
is never assigned in chk_rm_tx_nr() function and use 'echo' without '-n'
parameter.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 0639fa230a21 ("selftests: mptcp: add explicit check for new mibs")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a testcase explicitly triggering the newly introduce
MPTCP_FULL_INFO getsockopt.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/388
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update the existing sockopt test-case to do some basic checks
on the newly added counters.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/385
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/mlx5/driver.h
617f5db1a626 ("RDMA/mlx5: Fix affinity assignment")
dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports")
https://lore.kernel.org/all/20230613125939.595e50b8@canb.auug.org.au/
tools/testing/selftests/net/mptcp/mptcp_join.sh
47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported")
425ba803124b ("selftests: mptcp: join: support RM_ADDR for used endpoints or not")
45b1a1227a7a ("mptcp: introduces more address related mibs")
0639fa230a21 ("selftests: mptcp: add explicit check for new mibs")
https://lore.kernel.org/netdev/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of a mix of subflows in v4 and v6 by the
in-kernel PM introduced by commit b9d69db87fb7 ("mptcp: let the
in-kernel PM use mixed IPv4 and IPv6 addresses").
It looks like there is no external sign we can use to predict the
expected behaviour. Instead of accepting different behaviours and thus
not really checking for the expected behaviour, we are looking here for
a specific kernel version. That's not ideal but it looks better than
removing the test because it cannot support older kernel versions.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ad3493746ebe ("selftests: mptcp: add test-cases for mixed v4/v6 subflows")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The alignment was different from the other tests because tabs were used
instead of spaces.
While at it, also use 'echo' instead of 'printf' to print the result to
keep the same style as done in the other sub-tests. And, even if it
should be better with, also remove 'stdbuf' and sed's '--unbuffered'
option because they are not used in the other subtests and they are not
available when using a minimal environment with busybox.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 178d023208eb ("selftests: mptcp: listener test for in-kernel PM")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of PM listener events introduced by commit
f8c9dfbd875b ("mptcp: add pm listener events").
It is possible to look for "mptcp_event_pm_listener" in kallsyms to know
in advance if the kernel supports this feature.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 178d023208eb ("selftests: mptcp: listener test for in-kernel PM")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of sending an MP_PRIO signal for the initial
subflow, introduced by commit c157bbe776b7 ("mptcp: allow the in kernel
PM to set MPC subflow priority").
It is possible to look for "mptcp_subflow_send_ack" in kallsyms because
it was needed to introduce the mentioned feature. So we can know in
advance if the feature is supported instead of trying and accepting any
results.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 914f6a59b10f ("selftests: mptcp: add MPC backup tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
