summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/bpf
AgeCommit message (Collapse)Author
2024-10-07selftests: bpf: Add missing per-arch include pathBjörn Töpel
The prog_tests programs do not include the per-arch tools include path, e.g. tools/arch/riscv/include. Some architectures depend those files to build properly. Include tools/arch/$(SUBARCH)/include in the selftests bpf build. Fixes: 6d74d178fe6e ("tools: Add riscv barrier implementation") Signed-off-by: Björn Töpel <bjorn@rivosinc.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240927131355.350918-2-bjorn@kernel.org
2024-10-07selftests/bpf: Extend netkit tests to validate skb meta dataDaniel Borkmann
Add a small netkit test to validate skb mark and priority under the default scrubbing as well as with mark and priority scrubbing off. # ./vmtest.sh -- ./test_progs -t netkit [...] ./test_progs -t netkit [ 1.419662] tsc: Refined TSC clocksource calibration: 3407.993 MHz [ 1.420151] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fcd52370, max_idle_ns: 440795242006 ns [ 1.420897] clocksource: Switched to clocksource tsc [ 1.447996] bpf_testmod: loading out-of-tree module taints kernel. [ 1.448447] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel #357 tc_netkit_basic:OK #358 tc_netkit_device:OK #359 tc_netkit_multi_links:OK #360 tc_netkit_multi_opts:OK #361 tc_netkit_neigh_links:OK #362 tc_netkit_pkt_type:OK #363 tc_netkit_scrub:OK Summary: 7/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20241004101335.117711-5-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-10-03selftests/bpf: Emit top frequent code lines in veristatMykyta Yatsenko
Production BPF programs are increasing in number of instructions and states to the point, where optimising verification process for them is necessary to avoid running into instruction limit. Authors of those BPF programs need to analyze verifier output, for example, collecting the most frequent source code lines to understand which part of the program has the biggest verification cost. This patch introduces `--top-src-lines` flag in veristat. `--top-src-lines=N` makes veristat output N the most popular sorce code lines, parsed from verification log. An example of output: ``` sudo ./veristat --top-src-lines=2 bpf_flow.bpf.o Processing 'bpf_flow.bpf.o'... Top source lines (_dissect): 4: (bpf_helpers.h:161) asm volatile("r1 = %[ctx]\n\t" 4: (bpf_flow.c:155) if (iph && iph->ihl == 5 && ... ``` Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240930231522.58650-1-mykyta.yatsenko5@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03selftests/bpf: Support cross-endian buildingTony Ambardar
Update Makefile build rules to compile BPF programs with target endianness rather than host byte-order. With recent changes, this allows building the full selftests/bpf suite hosted on x86_64 and targeting s390x or mips64eb for example. Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/bpf/880ccc6342cfc4d3c48b44f581e87adfbce2876e.1726475448.git.tony.ambardar@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03selftests/bpf: Fix uprobe_multi compilation errorAlan Maguire
When building selftests, the following was seen: uprobe_multi.c: In function ‘trigger_uprobe’: uprobe_multi.c:108:40: error: ‘MADV_PAGEOUT’ undeclared (first use in this function) 108 | madvise(addr, page_sz, MADV_PAGEOUT); | ^~~~~~~~~~~~ uprobe_multi.c:108:40: note: each undeclared identifier is reported only once for each function it appears in make: *** [Makefile:850: bpf-next/tools/testing/selftests/bpf/uprobe_multi] Error 1 ...even with updated UAPI headers. It seems the above value is defined in UAPI <linux/mman.h> but including that file triggers other redefinition errors. Simplest solution is to add a guarded definition, as was done for MADV_POPULATE_READ. Fixes: 3c217a182018 ("selftests/bpf: add build ID tests") Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/bpf/20240926144948.172090-1-alan.maguire@oracle.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03selftests/bpf: vm: Add support for VIRTIO_FSManu Bretelle
danobi/vmtest is going to migrate from using 9p to using virtio_fs to mount the local rootfs: https://github.com/danobi/vmtest/pull/88 BPF CI uses danobi/vmtest to run bpf selftests and will need to support VIRTIO_FS. This change enables new kconfigs to be able to support the upcoming danobi/vmtest. Tested by building a new kernel with those config and confirming it would successfully run with 9p (currently what is used by vmtest), and with virtio_fs (using a local build of vmtest). $ vmtest -k arch/x86/boot/bzImage "findmnt /" => bzImage ===> Booting ===> Setting up VM ===> Running command TARGET SOURCE FSTYPE OPTIONS / /dev/root 9p rw,relatime,cache=5,access=client,msize=512000,trans=virtio $ /home/chantra/local/danobi-vmtest/target/debug/vmtest -k arch/x86/boot/bzImage "findmnt /" => bzImage ===> Initializing host environment ===> Booting ===> Setting up VM ===> Running command TARGET SOURCE FSTYPE OPTIONS / rootfs virtiofs rw,relatime Changes in v2: * Sorted configs alphabetically Signed-off-by: Manu Bretelle <chantr4@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Daniel Xu <dxu@dxuuu.xyz> Link: https://lore.kernel.org/bpf/20240925002210.501266-1-chantr4@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03selftests/bpf: Add missing va_end.Zhang Jiao
There is no va_end after va_copy, just add it. Signed-off-by: Zhang Jiao <zhangjiao2@cmss.chinamobile.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20240924045534.8672-1-zhangjiao2@cmss.chinamobile.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03selftests/bpf: Bail out quickly from failing consumer testJiri Olsa
Let's bail out from consumer test after we hit first fail, so we don't pollute the log with many instances with possibly the same error. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03selftests/bpf: Fix uprobe consumer testJiri Olsa
With newly merged code the uprobe behaviour is slightly different and affects uprobe consumer test. We no longer need to check if the uprobe object is still preserved after removing last uretprobe, because it stays as long as there's pending/installed uretprobe instance. This allows to run uretprobe consumers registered 'after' uprobe was hit even if previous uretprobe got unregistered before being hit. The uprobe object will be now removed after the last uprobe ref is released and in such case it's held by ri->uprobe (return instance) which is released after the uretprobe is hit. Reported-by: Ihor Solodrai <ihor.solodrai@pm.me> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Ihor Solodrai <ihor.solodrai@pm.me> Closes: https://lore.kernel.org/bpf/w6U8Z9fdhjnkSp2UaFaV1fGqJXvfLEtDKEUyGDkwmoruDJ_AgF_c0FFhrkeKW18OqiP-05s9yDKiT6X-Ns-avN_ABf0dcUkXqbSJN1TQSXo=@pm.me/ Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03selftests/bpf: Set vpath in Makefile to search for skelsIhor Solodrai
Auto-dependencies generated for %.test.o files refer to skels using filenames as opposed to full paths. This requires make to be able to link this name to an actual path, because not all generated skels are put in the working directory. In the original patch [1], this was mitigated by this target: $(notdir %.skel.h): $(TRUNNER_OUTPUT)/%.skel.h @true This turned out to be insufficient. First, %.lskel.h and %.subskel.h were missed, because a typical selftests/bpf build could find these files in the working directory. This error was detected by an out-of-tree build [2]. Second, even with missing rules added, this target causes unnecessary rebuilds in the out-of-tree case, as X.skel.h is searched for in the working directory, and not in the $(OUTPUT). Using vpath directive [3] is a better solution. Instead of introducing a separate target (X.skel.h in addition to $(TRUNNER_OUTPUT)/X.skel.h), make is instructed to search for skels in the output, which allows make to correctly detect that skel has already been generated. [1]: https://lore.kernel.org/bpf/VJihUTnvtwEgv_mOnpfy7EgD9D2MPNoHO-MlANeLIzLJPGhDeyOuGKIYyKgk0O6KPjfM-MuhtvPwZcngN8WFqbTnTRyCSMc2aMZ1ODm1T_g=@pm.me/ [2]: https://lore.kernel.org/bpf/CIjrhJwoIqMc2IhuppVqh4ZtJGbx8kC8rc9PHhAIU6RccnWT4I04F_EIr4GxQwxZe89McuGJlCnUk9UbkdvWtSJjAsd7mHmnTy9F8K2TLZM=@pm.me/ [3]: https://www.gnu.org/software/make/manual/html_node/Selective-Search.html Reported-by: Björn Töpel <bjorn@kernel.org> Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/bpf/20240916195919.1872371-2-ihor.solodrai@pm.me Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03selftests/bpf: Remove test_skb_cgroup_id.sh from TEST_PROGSIhor Solodrai
test_skb_cgroup_id.sh was deleted in https://git.kernel.org/bpf/bpf-next/c/f957c230e173 It has to be removed from TEST_PROGS variable in tools/testing/selftests/bpf/Makefile, otherwise install target fails. Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/bpf/20240916195919.1872371-1-ihor.solodrai@pm.me Link: https://lore.kernel.org/bpf/Q3BN2kW9Kgy6LkrDOwnyY4Pv7_YF8fInLCd2_QA3LimKYM3wD64kRdnwp7blwG2dI_s7UGnfUae-4_dOmuTrxpYCi32G_KTzB3PfmxIerH8=@pm.me/ Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-10-02bpf: selftests: send packet to devmap redirect XDPFlorian Kauer
The current xdp_devmap_attach test attaches a program that redirects to another program via devmap. It is, however, never executed, so do that to catch any bugs that might occur during execution. Also, execute the same for a veth pair so that we also cover the non-generic path. Warning: Running this without the bugfix in this series will likely crash your system. Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20240911-devel-koalo-fix-ingress-ifindex-v4-2-5c643ae10258@linutronix.de Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-10-01selftests/bpf: Verify that sync_linked_regs preserves subreg_defEduard Zingerman
This test was added because of a bug in verifier.c:sync_linked_regs(), upon range propagation it destroyed subreg_def marks for registers. The test is written in a way to return an upper half of a register that is affected by range propagation and must have it's subreg_def preserved. This gives a return value of 0 and leads to undefined return value if subreg_def mark is not preserved. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240924210844.1758441-2-eddyz87@gmail.com
2024-09-30selftests/bpf: Add mptcp subflow subtestGeliang Tang
This patch adds a subtest named test_subflow in test_mptcp to load and verify the newly added MPTCP subflow BPF program. To goal is to make sure it is possible to set different socket options per subflows, while the userspace socket interface only lets the application to set the same socket options for the whole MPTCP connection and its multiple subflows. To check that, a client and a server are started in a dedicated netns, with veth interfaces to simulate multiple paths. They will exchange data to allow the creation of an additional subflow. When the different subflows are being created, the new MPTCP subflow BPF program will set some socket options: marks and TCP CC. The validation is done by the same program, when the userspace checks the value of the modified socket options. On the userspace side, it will see that the default values are still being used on the MPTCP connection, while the BPF program will see different options set per subflow of the same MPTCP connection. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/76 Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240926-upstream-bpf-next-20240506-mptcp-subflow-test-v7-3-d26029e15cdd@kernel.org Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-09-30selftests/bpf: Add getsockopt to inspect mptcp subflowGeliang Tang
This patch adds a "cgroup/getsockopt" way to inspect the subflows of an MPTCP socket, and verify the modifications done by the same BPF program in the previous commit: a different mark per subflow, and a different TCP CC set on the second one. This new hook will be used by the next commit to verify the socket options set on each subflow. This extra "cgroup/getsockopt" prog walks the msk->conn_list and use bpf_core_cast to cast a pointer for readonly. It allows to inspect all the fields of a structure. Note that on the kernel side, the MPTCP socket stores a list of subflows under 'msk->conn_list'. They can be iterated using the generic 'list' helpers. They have been imported here, with a small difference: list_for_each_entry() uses 'can_loop' to limit the number of iterations, and ease its use. Because only data need to be read here, it is enough to use this technique. It is planned to use bpf_iter, when BPF programs will be used to modify data from the different subflows. mptcp_subflow_tcp_sock() and mptcp_for_each_stubflow() helpers have also be imported. Suggested-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240926-upstream-bpf-next-20240506-mptcp-subflow-test-v7-2-d26029e15cdd@kernel.org Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-09-30selftests/bpf: Add mptcp subflow exampleNicolas Rybowski
Move Nicolas' patch into bpf selftests directory. This example adds a different mark (SO_MARK) on each subflow, and changes the TCP CC only on the first subflow. From the userspace, an application can do a setsockopt() on an MPTCP socket, and typically the same value will be propagated to all subflows (paths). If someone wants to have different values per subflow, the recommended way is to use BPF. So it is good to add such example here, and make sure there is no regressions. This example shows how it is possible to: Identify the parent msk of an MPTCP subflow. Put different sockopt for each subflow of a same MPTCP connection. Here especially, two different behaviours are implemented: A socket mark (SOL_SOCKET SO_MARK) is put on each subflow of a same MPTCP connection. The order of creation of the current subflow defines its mark. The TCP CC algorithm of the very first subflow of an MPTCP connection is set to "reno". This is just to show it is possible to identify an MPTCP connection, and set socket options, from different SOL levels, per subflow. "reno" has been picked because it is built-in and usually not set as default one. It is easy to verify with 'ss' that these modifications have been applied correctly. That's what the next patch is going to do. Nicolas' code comes from: commit 4d120186e4d6 ("bpf:examples: update mptcp_set_mark_kern.c") from the MPTCP repo https://github.com/multipath-tcp/mptcp_net-next (the "scripts" branch), and it has been adapted by Geliang. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/76 Co-developed-by: Geliang Tang <tanggeliang@kylinos.cn> Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Signed-off-by: Nicolas Rybowski <nicolas.rybowski@tessares.net> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240926-upstream-bpf-next-20240506-mptcp-subflow-test-v7-1-d26029e15cdd@kernel.org Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-09-21Merge tag 'bpf-next-6.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Pull bpf updates from Alexei Starovoitov: - Introduce '__attribute__((bpf_fastcall))' for helpers and kfuncs with corresponding support in LLVM. It is similar to existing 'no_caller_saved_registers' attribute in GCC/LLVM with a provision for backward compatibility. It allows compilers generate more efficient BPF code assuming the verifier or JITs will inline or partially inline a helper/kfunc with such attribute. bpf_cast_to_kern_ctx, bpf_rdonly_cast, bpf_get_smp_processor_id are the first set of such helpers. - Harden and extend ELF build ID parsing logic. When called from sleepable context the relevants parts of ELF file will be read to find and fetch .note.gnu.build-id information. Also harden the logic to avoid TOCTOU, overflow, out-of-bounds problems. - Improvements and fixes for sched-ext: - Allow passing BPF iterators as kfunc arguments - Make the pointer returned from iter_next method trusted - Fix x86 JIT convergence issue due to growing/shrinking conditional jumps in variable length encoding - BPF_LSM related: - Introduce few VFS kfuncs and consolidate them in fs/bpf_fs_kfuncs.c - Enforce correct range of return values from certain LSM hooks - Disallow attaching to other LSM hooks - Prerequisite work for upcoming Qdisc in BPF: - Allow kptrs in program provided structs - Support for gen_epilogue in verifier_ops - Important fixes: - Fix uprobe multi pid filter check - Fix bpf_strtol and bpf_strtoul helpers - Track equal scalars history on per-instruction level - Fix tailcall hierarchy on x86 and arm64 - Fix signed division overflow to prevent INT_MIN/-1 trap on x86 - Fix get kernel stack in BPF progs attached to tracepoint:syscall - Selftests: - Add uprobe bench/stress tool - Generate file dependencies to drastically improve re-build time - Match JIT-ed and BPF asm with __xlated/__jited keywords - Convert older tests to test_progs framework - Add support for RISC-V - Few fixes when BPF programs are compiled with GCC-BPF backend (support for GCC-BPF in BPF CI is ongoing in parallel) - Add traffic monitor - Enable cross compile and musl libc * tag 'bpf-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (260 commits) btf: require pahole 1.21+ for DEBUG_INFO_BTF with default DWARF version btf: move pahole check in scripts/link-vmlinux.sh to lib/Kconfig.debug btf: remove redundant CONFIG_BPF test in scripts/link-vmlinux.sh bpf: Call the missed kfree() when there is no special field in btf bpf: Call the missed btf_record_free() when map creation fails selftests/bpf: Add a test case to write mtu result into .rodata selftests/bpf: Add a test case to write strtol result into .rodata selftests/bpf: Rename ARG_PTR_TO_LONG test description selftests/bpf: Fix ARG_PTR_TO_LONG {half-,}uninitialized test bpf: Zero former ARG_PTR_TO_{LONG,INT} args in case of error bpf: Improve check_raw_mode_ok test for MEM_UNINIT-tagged types bpf: Fix helper writes to read-only maps bpf: Remove truncation test in bpf_strtol and bpf_strtoul helpers bpf: Fix bpf_strtol and bpf_strtoul helpers for 32bit selftests/bpf: Add tests for sdiv/smod overflow cases bpf: Fix a sdiv overflow issue libbpf: Add bpf_object__token_fd accessor docs/bpf: Add missing BPF program types to docs docs/bpf: Add constant values for linkages bpf: Use fake pt_regs when doing bpf syscall tracepoint tracing ...
2024-09-18Merge tag 'perf-core-2024-09-18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf events updates from Ingo Molnar: - Implement per-PMU context rescheduling to significantly improve single-PMU performance, and related cleanups/fixes (Peter Zijlstra and Namhyung Kim) - Fix ancient bug resulting in a lot of events being dropped erroneously at higher sampling frequencies (Luo Gengkun) - uprobes enhancements: - Implement RCU-protected hot path optimizations for better performance: "For baseline vs SRCU, peak througput increased from 3.7 M/s (million uprobe triggerings per second) up to about 8 M/s. For uretprobes it's a bit more modest with bump from 2.4 M/s to 5 M/s. For SRCU vs RCU Tasks Trace, peak throughput for uprobes increases further from 8 M/s to 10.3 M/s (+28%!), and for uretprobes from 5.3 M/s to 5.8 M/s (+11%), as we have more work to do on uretprobes side. Even single-thread (no contention) performance is slightly better: 3.276 M/s to 3.396 M/s (+3.5%) for uprobes, and 2.055 M/s to 2.174 M/s (+5.8%) for uretprobes." (Andrii Nakryiko et al) - Document mmap_lock, don't abuse get_user_pages_remote() (Oleg Nesterov) - Cleanups & fixes to prepare for future work: - Remove uprobe_register_refctr() - Simplify error handling for alloc_uprobe() - Make uprobe_register() return struct uprobe * - Fold __uprobe_unregister() into uprobe_unregister() - Shift put_uprobe() from delete_uprobe() to uprobe_unregister() - BPF: Fix use-after-free in bpf_uprobe_multi_link_attach() (Oleg Nesterov) - New feature & ABI extension: allow events to use PERF_SAMPLE READ with inheritance, enabling sample based profiling of a group of counters over a hierarchy of processes or threads (Ben Gainey) - Intel uncore & power events updates: - Add Arrow Lake and Lunar Lake support - Add PERF_EV_CAP_READ_SCOPE - Clean up and enhance cpumask and hotplug support (Kan Liang) - Add LNL uncore iMC freerunning support - Use D0:F0 as a default device (Zhenyu Wang) - Intel PT: fix AUX snapshot handling race (Adrian Hunter) - Misc fixes and cleanups (James Clark, Jiri Olsa, Oleg Nesterov and Peter Zijlstra) * tag 'perf-core-2024-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) dmaengine: idxd: Clean up cpumask and hotplug for perfmon iommu/vt-d: Clean up cpumask and hotplug for perfmon perf/x86/intel/cstate: Clean up cpumask and hotplug perf: Add PERF_EV_CAP_READ_SCOPE perf: Generic hotplug support for a PMU with a scope uprobes: perform lockless SRCU-protected uprobes_tree lookup rbtree: provide rb_find_rcu() / rb_find_add_rcu() perf/uprobe: split uprobe_unregister() uprobes: travers uprobe's consumer list locklessly under SRCU protection uprobes: get rid of enum uprobe_filter_ctx in uprobe filter callbacks uprobes: protected uprobe lifetime with SRCU uprobes: revamp uprobe refcounting and lifetime management bpf: Fix use-after-free in bpf_uprobe_multi_link_attach() perf/core: Fix small negative period being ignored perf: Really fix event_function_call() locking perf: Optimize __pmu_ctx_sched_out() perf: Add context time freeze perf: Fix event_function_call() locking perf: Extract a few helpers perf: Optimize context reschedule for single PMU cases ...
2024-09-13selftests/bpf: Add a test case to write mtu result into .rodataDaniel Borkmann
Add a test which attempts to call bpf_check_mtu() and writes the MTU into .rodata section of the BPF program, and for comparison this adds test cases also for .bss and .data section again. The bpf_check_mtu() is a bit more special in that the passed mtu argument is read and written by the helper (instead of just written to). Assert that writes into .rodata remain rejected by the verifier. # ./vmtest.sh -- ./test_progs -t verifier_const [...] ./test_progs -t verifier_const [ 1.657367] bpf_testmod: loading out-of-tree module taints kernel. [ 1.657773] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel #473/1 verifier_const/rodata/strtol: write rejected:OK #473/2 verifier_const/bss/strtol: write accepted:OK #473/3 verifier_const/data/strtol: write accepted:OK #473/4 verifier_const/rodata/mtu: write rejected:OK #473/5 verifier_const/bss/mtu: write accepted:OK #473/6 verifier_const/data/mtu: write accepted:OK #473 verifier_const:OK [...] Summary: 2/10 PASSED, 0 SKIPPED, 0 FAILED For comparison, without the MEM_UNINIT on bpf_check_mtu's proto: # ./vmtest.sh -- ./test_progs -t verifier_const [...] #473/3 verifier_const/data/strtol: write accepted:OK run_subtest:PASS:obj_open_mem 0 nsec run_subtest:FAIL:unexpected_load_success unexpected success: 0 #473/4 verifier_const/rodata/mtu: write rejected:FAIL #473/5 verifier_const/bss/mtu: write accepted:OK #473/6 verifier_const/data/mtu: write accepted:OK #473 verifier_const:FAIL [...] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20240913191754.13290-9-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-13selftests/bpf: Add a test case to write strtol result into .rodataDaniel Borkmann
Add a test case which attempts to write into .rodata section of the BPF program, and for comparison this adds test cases also for .bss and .data section. Before fix: # ./vmtest.sh -- ./test_progs -t verifier_const [...] ./test_progs -t verifier_const tester_init:PASS:tester_log_buf 0 nsec process_subtest:PASS:obj_open_mem 0 nsec process_subtest:PASS:specs_alloc 0 nsec run_subtest:PASS:obj_open_mem 0 nsec run_subtest:FAIL:unexpected_load_success unexpected success: 0 #465/1 verifier_const/rodata: write rejected:FAIL #465/2 verifier_const/bss: write accepted:OK #465/3 verifier_const/data: write accepted:OK #465 verifier_const:FAIL [...] After fix: # ./vmtest.sh -- ./test_progs -t verifier_const [...] ./test_progs -t verifier_const #465/1 verifier_const/rodata: write rejected:OK #465/2 verifier_const/bss: write accepted:OK #465/3 verifier_const/data: write accepted:OK #465 verifier_const:OK [...] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240913191754.13290-8-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-13selftests/bpf: Rename ARG_PTR_TO_LONG test descriptionDaniel Borkmann
Given we got rid of ARG_PTR_TO_LONG, change the test case description to avoid potential confusion: # ./vmtest.sh -- ./test_progs -t verifier_int_ptr [...] ./test_progs -t verifier_int_ptr [ 1.610563] bpf_testmod: loading out-of-tree module taints kernel. [ 1.611049] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel #489/1 verifier_int_ptr/arg pointer to long uninitialized:OK #489/2 verifier_int_ptr/arg pointer to long half-uninitialized:OK #489/3 verifier_int_ptr/arg pointer to long misaligned:OK #489/4 verifier_int_ptr/arg pointer to long size < sizeof(long):OK #489/5 verifier_int_ptr/arg pointer to long initialized:OK #489 verifier_int_ptr:OK Summary: 1/5 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20240913191754.13290-7-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-13selftests/bpf: Fix ARG_PTR_TO_LONG {half-,}uninitialized testDaniel Borkmann
The assumption of 'in privileged mode reads from uninitialized stack locations are permitted' is not quite correct since the verifier was probing for read access rather than write access. Both tests need to be annotated as __success for privileged and unprivileged. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240913191754.13290-6-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-13selftests/bpf: Add tests for sdiv/smod overflow casesYonghong Song
Subtests are added to exercise the patched code which handles - LLONG_MIN/-1 - INT_MIN/-1 - LLONG_MIN%-1 - INT_MIN%-1 where -1 could be an immediate or in a register. Without the previous patch, all these cases will crash the kernel on x86_64 platform. Additional tests are added to use small values (e.g. -5/-1, 5%-1, etc.) in order to exercise the additional logic with patched insns. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20240913150332.1188102-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-12Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2024-09-11 We've added 12 non-merge commits during the last 16 day(s) which contain a total of 20 files changed, 228 insertions(+), 30 deletions(-). There's a minor merge conflict in drivers/net/netkit.c: 00d066a4d4ed ("netdev_features: convert NETIF_F_LLTX to dev->lltx") d96608794889 ("netkit: Disable netpoll support") The main changes are: 1) Enable bpf_dynptr_from_skb for tp_btf such that this can be used to easily parse skbs in BPF programs attached to tracepoints, from Philo Lu. 2) Add a cond_resched() point in BPF's sock_hash_free() as there have been several syzbot soft lockup reports recently, from Eric Dumazet. 3) Fix xsk_buff_can_alloc() to account for queue_empty_descs which got noticed when zero copy ice driver started to use it, from Maciej Fijalkowski. 4) Move the xdp:xdp_cpumap_kthread tracepoint before cpumap pushes skbs up via netif_receive_skb_list() to better measure latencies, from Daniel Xu. 5) Follow-up to disable netpoll support from netkit, from Daniel Borkmann. 6) Improve xsk selftests to not assume a fixed MAX_SKB_FRAGS of 17 but instead gather the actual value via /proc/sys/net/core/max_skb_frags, also from Maciej Fijalkowski. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: sock_map: Add a cond_resched() in sock_hash_free() selftests/bpf: Expand skb dynptr selftests for tp_btf bpf: Allow bpf_dynptr_from_skb() for tp_btf tcp: Use skb__nullable in trace_tcp_send_reset selftests/bpf: Add test for __nullable suffix in tp_btf bpf: Support __nullable argument suffix for tp_btf bpf, cpumap: Move xdp:xdp_cpumap_kthread tracepoint before rcv selftests/xsk: Read current MAX_SKB_FRAGS from sysctl knob xsk: Bump xsk_queue::queue_empty_descs in xp_can_alloc() tcp_bpf: Remove an unused parameter for bpf_tcp_ingress() bpf, sockmap: Correct spelling skmsg.c netkit: Disable netpoll support Signed-off-by: Jakub Kicinski <kuba@kernel.org> ==================== Link: https://patch.msgid.link/20240911211525.13834-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts (sort of) and no adjacent changes. This merge reverts commit b3c9e65eb227 ("net: hsr: remove seqnr_lock") from net, as it was superseded by commit 430d67bdcb04 ("net: hsr: Use the seqnr lock for frames received via interlink port.") in net-next. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11bpf/selftests: Check errno when percpu map value size exceedsTao Chen
This test case checks the errno message when percpu map value size exceeds PCPU_MIN_UNIT_SIZE. root@debian:~# ./test_maps ... test_map_percpu_stats_hash_of_maps:PASS test_map_percpu_stats_map_value_size:PASS test_sk_storage_map:PASS Signed-off-by: Jinke Han <jinkehan@didiglobal.com> Signed-off-by: Tao Chen <chen.dylane@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240910144111.1464912-3-chen.dylane@gmail.com
2024-09-11selftests/bpf: Fix arena_atomics failure due to llvm changeYonghong Song
llvm change [1] made a change such that __sync_fetch_and_{and,or,xor}() will generate atomic_fetch_*() insns even if the return value is not used. This is a deliberate choice to make sure barrier semantics are preserved from source code to asm insn. But the change in [1] caused arena_atomics selftest failure. test_arena_atomics:PASS:arena atomics skeleton open 0 nsec libbpf: prog 'and': BPF program load failed: Permission denied libbpf: prog 'and': -- BEGIN PROG LOAD LOG -- arg#0 reference type('UNKNOWN ') size cannot be determined: -22 0: R1=ctx() R10=fp0 ; if (pid != (bpf_get_current_pid_tgid() >> 32)) @ arena_atomics.c:87 0: (18) r1 = 0xffffc90000064000 ; R1_w=map_value(map=arena_at.bss,ks=4,vs=4) 2: (61) r6 = *(u32 *)(r1 +0) ; R1_w=map_value(map=arena_at.bss,ks=4,vs=4) R6_w=scalar(smin=0,smax=umax=0xffffffff,v ar_off=(0x0; 0xffffffff)) 3: (85) call bpf_get_current_pid_tgid#14 ; R0_w=scalar() 4: (77) r0 >>= 32 ; R0_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff)) 5: (5d) if r0 != r6 goto pc+11 ; R0_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff)) R6_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0x) ; __sync_fetch_and_and(&and64_value, 0x011ull << 32); @ arena_atomics.c:91 6: (18) r1 = 0x100000000060 ; R1_w=scalar() 8: (bf) r1 = addr_space_cast(r1, 0, 1) ; R1_w=arena 9: (18) r2 = 0x1100000000 ; R2_w=0x1100000000 11: (db) r2 = atomic64_fetch_and((u64 *)(r1 +0), r2) BPF_ATOMIC stores into R1 arena is not allowed processed 9 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0 -- END PROG LOAD LOG -- libbpf: prog 'and': failed to load: -13 libbpf: failed to load object 'arena_atomics' libbpf: failed to load BPF skeleton 'arena_atomics': -13 test_arena_atomics:FAIL:arena atomics skeleton load unexpected error: -13 (errno 13) #3 arena_atomics:FAIL The reason of the failure is due to [2] where atomic{64,}_fetch_{and,or,xor}() are not allowed by arena addresses. Version 2 of the patch fixed the issue by using inline asm ([3]). But further discussion suggested to find a way from source to generate locked insn which is more user friendly. So in not-merged llvm patch ([4]), if relax memory ordering is used and the return value is not used, locked insn could be generated. So with llvm patch [4] to compile the bpf selftest, the following code __c11_atomic_fetch_and(&and64_value, 0x011ull << 32, memory_order_relaxed); is able to generate locked insn, hence fixing the selftest failure. [1] https://github.com/llvm/llvm-project/pull/106494 [2] d503a04f8bc0 ("bpf: Add support for certain atomics in bpf_arena to x86 JIT") [3] https://lore.kernel.org/bpf/20240803025928.4184433-1-yonghong.song@linux.dev/ [4] https://github.com/llvm/llvm-project/pull/107343 Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20240909223431.1666305-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-11selftests/bpf: add build ID testsAndrii Nakryiko
Add a new set of tests validating behavior of capturing stack traces with build ID. We extend uprobe_multi target binary with ability to trigger uprobe (so that we can capture stack traces from it), but also we allow to force build ID data to be either resident or non-resident in memory (see also a comment about quirks of MADV_PAGEOUT). That way we can validate that in non-sleepable context we won't get build ID (as expected), but with sleepable uprobes we will get that build ID regardless of it being physically present in memory. Also, we add a small add-on linker script which reorders .note.gnu.build-id section and puts it after (big) .text section, putting build ID data outside of the very first page of ELF file. This will test all the relaxations we did in build ID parsing logic in kernel thanks to freader abstraction. Reviewed-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240829174232.3133883-11-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-11selftests/bpf: Expand skb dynptr selftests for tp_btfPhilo Lu
Add 3 test cases for skb dynptr used in tp_btf: - test_dynptr_skb_tp_btf: use skb dynptr in tp_btf and make sure it is read-only. - skb_invalid_ctx_fentry/skb_invalid_ctx_fexit: bpf_dynptr_from_skb should fail in fentry/fexit. In test_dynptr_skb_tp_btf, to trigger the tracepoint in kfree_skb, test_pkt_access is used for its test_run, as in kfree_skb.c. Because the test process is different from others, a new setup type is defined, i.e., SETUP_SKB_PROG_TP. The result is like: $ ./test_progs -t 'dynptr/test_dynptr_skb_tp_btf' #84/14 dynptr/test_dynptr_skb_tp_btf:OK #84 dynptr:OK #127 kfunc_dynptr_param:OK Summary: 2/1 PASSED, 0 SKIPPED, 0 FAILED $ ./test_progs -t 'dynptr/skb_invalid_ctx_f' #84/85 dynptr/skb_invalid_ctx_fentry:OK #84/86 dynptr/skb_invalid_ctx_fexit:OK #84 dynptr:OK #127 kfunc_dynptr_param:OK Summary: 2/2 PASSED, 0 SKIPPED, 0 FAILED Also fix two coding style nits (change spaces to tabs). Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Link: https://lore.kernel.org/r/20240911033719.91468-6-lulie@linux.alibaba.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-09-11selftests/bpf: Add test for __nullable suffix in tp_btfPhilo Lu
Add a tracepoint with __nullable suffix in bpf_testmod, and add cases for it: $ ./test_progs -t "tp_btf_nullable" #406/1 tp_btf_nullable/handle_tp_btf_nullable_bare1:OK #406/2 tp_btf_nullable/handle_tp_btf_nullable_bare2:OK #406 tp_btf_nullable:OK Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Link: https://lore.kernel.org/r/20240911033719.91468-3-lulie@linux.alibaba.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-09-11selftests/xsk: Read current MAX_SKB_FRAGS from sysctl knobMaciej Fijalkowski
Currently, xskxceiver assumes that MAX_SKB_FRAGS value is always 17 which is not true - since the introduction of BIG TCP this can now take any value between 17 to 45 via CONFIG_MAX_SKB_FRAGS. Adjust the TOO_MANY_FRAGS test case to read the currently configured MAX_SKB_FRAGS value by reading it from /proc/sys/net/core/max_skb_frags. If running system does not provide that sysctl file then let us try running the test with a default value. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20240910124129.289874-1-maciej.fijalkowski@intel.com
2024-09-09bpf: Fix error message on kfunc arg type mismatchMaxim Mikityanskiy
When "arg#%d expected pointer to ctx, but got %s" error is printed, both template parts actually point to the type of the argument, therefore, it will also say "but got PTR", regardless of what was the actual register type. Fix the message to print the register type in the second part of the template, change the existing test to adapt to the new format, and add a new test to test the case when arg is a pointer to context, but reg is a scalar. Fixes: 00b85860feb8 ("bpf: Rewrite kfunc argument handling") Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/bpf/20240909133909.1315460-1-maxim@isovalent.com
2024-09-05bpf/selftests: coverage for tp and perf event progs using kfuncsJP Kobryn
This coverage ensures that kfuncs are allowed within tracepoint and perf event programs. Signed-off-by: JP Kobryn <inwardvessel@gmail.com> Link: https://lore.kernel.org/r/20240905223812.141857-3-inwardvessel@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-05selftests/bpf: Add description for running vmtest on RV64Pu Lehui
Add description in tools/testing/selftests/bpf/README.rst for running vmtest on RV64. Signed-off-by: Pu Lehui <pulehui@huawei.com> Link: https://lore.kernel.org/r/20240905081401.1894789-11-pulehui@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-05selftests/bpf: Add riscv64 configurations to local vmtestPu Lehui
Add riscv64 configurations to local vmtest. We can now perform cross platform testing for riscv64 bpf using the following command: PLATFORM=riscv64 CROSS_COMPILE=riscv64-linux-gnu- vmtest.sh \ -l ./libbpf-vmtest-rootfs-2024.08.30-noble-riscv64.tar.zst -- \ ./test_progs -d \ \"$(cat tools/testing/selftests/bpf/DENYLIST.riscv64 \ | cut -d'#' -f1 \ | sed -e 's/^[[:space:]]*//' \ -e 's/[[:space:]]*$//' \ | tr -s '\n' ','\ )\" Tested-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Pu Lehui <pulehui@huawei.com> Link: https://lore.kernel.org/r/20240905081401.1894789-10-pulehui@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-05selftests/bpf: Add DENYLIST.riscv64Pu Lehui
This patch adds DENYLIST.riscv64 file for riscv64. It will help BPF CI and local vmtest to mask failing and unsupported test cases. We can use the following command to use deny list in local vmtest as previously mentioned by Manu. PLATFORM=riscv64 CROSS_COMPILE=riscv64-linux-gnu- vmtest.sh \ -l ./libbpf-vmtest-rootfs-2024.08.30-noble-riscv64.tar.zst -- \ ./test_progs -d \ \"$(cat tools/testing/selftests/bpf/DENYLIST.riscv64 \ | cut -d'#' -f1 \ | sed -e 's/^[[:space:]]*//' \ -e 's/[[:space:]]*$//' \ | tr -s '\n' ','\ )\" Tested-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Pu Lehui <pulehui@huawei.com> Link: https://lore.kernel.org/r/20240905081401.1894789-9-pulehui@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-05selftests/bpf: Add config.riscv64Pu Lehui
Add config.riscv64 for both BPF CI and local vmtest. Tested-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Pu Lehui <pulehui@huawei.com> Link: https://lore.kernel.org/r/20240905081401.1894789-8-pulehui@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-05selftests/bpf: Enable cross platform testing for vmtestPu Lehui
Add support cross platform testing for vmtest. The variable $ARCH in the current script is platform semantics, not kernel semantics. Rename it to $PLATFORM so that we can easily use $ARCH in cross-compilation. And drop `set -u` unbound variable check as we will use CROSS_COMPILE env variable. For now, Using PLATFORM= and CROSS_COMPILE= options will enable cross platform testing: PLATFORM=<platform> CROSS_COMPILE=<toolchain> vmtest.sh -- ./test_progs Tested-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Pu Lehui <pulehui@huawei.com> Link: https://lore.kernel.org/r/20240905081401.1894789-7-pulehui@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-05selftests/bpf: Support local rootfs image for vmtestPu Lehui
Support vmtest to use local rootfs image generated by [0] that is consistent with BPF CI. Now we can specify the local rootfs image through the `-l` parameter like as follows: vmtest.sh -l ./libbpf-vmtest-rootfs-2024.08.22-noble-amd64.tar.zst -- ./test_progs Meanwhile, some descriptions have been flushed. Link: https://github.com/libbpf/ci/blob/main/rootfs/mkrootfs_debian.sh [0] Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Pu Lehui <pulehui@huawei.com> Link: https://lore.kernel.org/r/20240905081401.1894789-6-pulehui@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-05selftests/bpf: Limit URLS parsing logic to actual scope in vmtestPu Lehui
The URLS array is only valid in the download_rootfs function and does not need to be parsed globally in advance. At the same time, the logic of loading rootfs is refactored to prepare vmtest for supporting local rootfs. Signed-off-by: Pu Lehui <pulehui@huawei.com> Link: https://lore.kernel.org/r/20240905081401.1894789-5-pulehui@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-05selftests/bpf: Prefer static linking for LLVM librariesEduard Zingerman
It is not always convenient to have LLVM libraries installed inside CI rootfs images, thus request static libraries from llvm-config. Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20240905081401.1894789-4-pulehui@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-05selftests/bpf: Rename fallback in bpf_dctcp to avoid naming conflictPu Lehui
Recently, when compiling bpf selftests on RV64, the following compilation failure occurred: progs/bpf_dctcp.c:29:21: error: redefinition of 'fallback' as different kind of symbol 29 | volatile const char fallback[TCP_CA_NAME_MAX]; | ^ /workspace/tools/testing/selftests/bpf/tools/include/vmlinux.h:86812:15: note: previous definition is here 86812 | typedef u32 (*fallback)(u32, const unsigned char *, size_t); The reason is that the `fallback` symbol has been defined in arch/riscv/lib/crc32.c, which will cause symbol conflicts when vmlinux.h is included in bpf_dctcp. Let we rename `fallback` string to `fallback_cc` in bpf_dctcp to fix this compilation failure. Signed-off-by: Pu Lehui <pulehui@huawei.com> Link: https://lore.kernel.org/r/20240905081401.1894789-3-pulehui@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-05selftests/bpf: Adapt OUTPUT appending logic to lower versions of MakePu Lehui
The $(let ...) function is only supported by GNU Make version 4.4 [0] and above, otherwise the following exception file or directory will be generated: tools/testing/selftests/bpfFEATURE-DUMP.selftests tools/testing/selftests/bpffeature/ Considering that the GNU Make version of most Linux distributions is lower than 4.4, let us adapt the corresponding logic to it. Link: https://lists.gnu.org/archive/html/info-gnu/2022-10/msg00008.html [0] Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Pu Lehui <pulehui@huawei.com> Link: https://lore.kernel.org/r/20240905081401.1894789-2-pulehui@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-05selftests/bpf: fix some typos in selftestsLin Yikai
Hi, fix some spelling errors in selftest, the details are as follows: -in the codes: test_bpf_sk_stoarge_map_iter_fd(void) ->test_bpf_sk_storage_map_iter_fd(void) load BTF from btf_data.o->load BTF from btf_data.bpf.o -in the code comments: preample->preamble multi-contollers->multi-controllers errono->errno unsighed/unsinged->unsigned egree->egress shoud->should regsiter->register assummed->assumed conditiona->conditional rougly->roughly timetamp->timestamp ingores->ignores null-termainted->null-terminated slepable->sleepable implemenation->implementation veriables->variables timetamps->timestamps substitue a costant->substitute a constant secton->section unreferened->unreferenced verifer->verifier libppf->libbpf ... Signed-off-by: Lin Yikai <yikai.lin@vivo.com> Link: https://lore.kernel.org/r/20240905110354.3274546-1-yikai.lin@vivo.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-05selftests/bpf: Add uprobe multi pid filter test for clone-ed processesJiri Olsa
The idea is to run same test as for test_pid_filter_process, but instead of standard fork-ed process we create the process with clone(CLONE_VM..) to make sure the thread leader process filter works properly in this case. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240905115124.1503998-5-jolsa@kernel.org
2024-09-05selftests/bpf: Add uprobe multi pid filter test for fork-ed processesJiri Olsa
The idea is to create and monitor 3 uprobes, each trigered in separate process and make sure the bpf program gets executed just for the proper PID specified via pid filter. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240905115124.1503998-4-jolsa@kernel.org
2024-09-05selftests/bpf: Add child argument to spawn_child functionJiri Olsa
Adding child argument to spawn_child function to allow to create multiple children in following change. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240905115124.1503998-3-jolsa@kernel.org
2024-09-05perf/uprobe: split uprobe_unregister()Peter Zijlstra
With uprobe_unregister() having grown a synchronize_srcu(), it becomes fairly slow to call. Esp. since both users of this API call it in a loop. Peel off the sync_srcu() and do it once, after the loop. We also need to add uprobe_unregister_sync() into uprobe_register()'s error handling path, as we need to be careful about returning to the caller before we have a guarantee that partially attached consumer won't be called anymore. This is an unlikely slow path and this should be totally fine to be slow in the case of a failed attach. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org> Co-developed-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Link: https://lore.kernel.org/r/20240903174603.3554182-6-andrii@kernel.org
2024-09-05Merge branch 'perf/urgent' into perf/core, to pick up fixesIngo Molnar
This also refreshes the -rc1 based branch to -rc5. Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 21:08:06 +0000