| Age | Commit message (Collapse) | Author |
|---|
|
Introduce a test case to evaluate AF_XDP's robustness by pushing hardware
and software ring sizes to their limits. This test ensures AF_XDP's
reliability amidst potential producer/consumer throttling due to maximum
ring utilization. The testing strategy includes:
1. Configuring rings to their maximum allowable sizes.
2. Executing a series of tests across diverse batch sizes to assess
system's behavior under different configurations.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-8-tushar.vyavahare@intel.com
|
|
Add a new test case that stresses AF_XDP and the driver by configuring
small hardware and software ring sizes. This verifies that AF_XDP continues
to function properly even with insufficient ring space that could lead
to frequent producer/consumer throttling. The test procedure involves:
1. Set the minimum possible ring configuration(tx 64 and rx 128).
2. Run tests with various batch sizes(1 and 63) to validate the system's
behavior under different configurations.
Update Makefile to include network_helpers.o in the build process for
xskxceiver.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-7-tushar.vyavahare@intel.com
|
|
handling AF_XDP socket closures
Introduce a new function, set_ring_size(), to manage asynchronous AF_XDP
socket closure. Retry set_hw_ring_size up to SOCK_RECONF_CTR times if it
fails due to an active AF_XDP socket. Return an error immediately for
non-EBUSY errors. This enhances robustness against asynchronous AF_XDP
socket closures during ring size changes.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-6-tushar.vyavahare@intel.com
|
|
Convert the constant BATCH_SIZE into a variable named batch_size to allow
dynamic modification at runtime. This is required for the forthcoming
changes to support testing different hardware ring sizes.
While running these tests, a bug was identified when the batch size is
roughly the same as the NIC ring size. This has now been addressed by
Maciej's fix in commit 913eda2b08cc ("i40e: xsk: remove count_mask").
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-3-tushar.vyavahare@intel.com
|
|
Fix test broken by shared umem test and framework enhancement commit.
Correct the current implementation of pkt_stream_replace_half() by
ensuring that nb_valid_entries are not set to half, as this is not true
for all the tests. Ensure that the expected value for valid_entries for
the SEND_RECEIVE_UNALIGNED test equals the total number of packets sent,
which is 4096.
Create a new function called pkt_stream_pkt_set() that allows for packet
modification to meet specific requirements while ensuring the accurate
maintenance of the valid packet count to prevent inconsistencies in packet
tracking.
Fixes: 6d198a89c004 ("selftests/xsk: Add a test for shared umem feature")
Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20231214130007.33281-1-tushar.vyavahare@intel.com
|
|
Crossbuilding selftests/bpf for architecture arm64, format specifies
type error show up like.
xskxceiver.c:912:34: error: format specifies type 'int' but the argument
has type '__u64' (aka 'unsigned long long') [-Werror,-Wformat]
ksft_print_msg("[%s] expected meta_count [%d], got meta_count [%d]\n",
~~
%llu
__func__, pkt->pkt_nb, meta->count);
^~~~~~~~~~~
xskxceiver.c:929:55: error: format specifies type 'unsigned long long' but
the argument has type 'u64' (aka 'unsigned long') [-Werror,-Wformat]
ksft_print_msg("Frag invalid addr: %llx len: %u\n", addr, len);
~~~~ ^~~~
Fixing the issues by casting to (unsigned long long) and changing the
specifiers to be %llu from %d and %u, since with u64s it might be %llx
or %lx, depending on architecture.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/r/20231109174328.1774571-1-anders.roxell@linaro.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Fix a bunch of potentially unitialized variable usage warnings that are
reported by GCC in -O2 mode. Also silence overzealous stringop-truncation
class of warnings.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20231006175744.3136675-1-andrii@kernel.org
|
|
Add a new test for testing shared umem feature. This is accomplished by
adding a new XDP program and using the multiple sockets.
The new XDP program redirects the packets based on the destination MAC
address.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20230927135241.2287547-9-tushar.vyavahare@intel.com
|
|
Modify xsk_update_xskmap() to accept the index as an argument, enabling
the addition of multiple sockets to xskmap.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20230927135241.2287547-8-tushar.vyavahare@intel.com
|
|
Update send_pkts() to handle multiple sockets for sending packets.
Multiple TX sockets are utilized alternately based on the batch size for
improve packet transmission.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20230927135241.2287547-7-tushar.vyavahare@intel.com
|
|
The pkt_set() function no longer needs the umem parameter. This commit
removes the umem parameter from the pkt_set() function.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20230927135241.2287547-6-tushar.vyavahare@intel.com
|
|
Improve the receive_pkt() function to enable it to receive packets from
multiple sockets. Define a sock_num variable to iterate through all the
sockets in the Rx path. Add nb_valid_entries to check that all the
expected number of packets are received.
Revise the function __receive_pkts() to only inspect the receive ring
once, handle any received packets, and promptly return. Implement a bitmap
to store the value of number of sockets. Update Makefile to include
find_bit.c for compiling xskxceiver.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20230927135241.2287547-5-tushar.vyavahare@intel.com
|
|
Move the src_mac and dst_mac fields from the ifobject structure to the
xsk_socket_info structure to achieve per-socket MAC address assignment.
Require this in order to steer traffic to various sockets in subsequent
patches.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20230927135241.2287547-4-tushar.vyavahare@intel.com
|
|
Rename the header file to a generic name so that it can be used by all
future XDP programs. Ensure that the xsk_xdp_common.h header file includes
include guards.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20230927135241.2287547-3-tushar.vyavahare@intel.com
|
|
Move the packet stream from the ifobject struct to the xsk_socket_info
struct to enable the use of different streams for different sockets. This
will facilitate the sending and receiving of data from multiple sockets
simultaneously using the SHARED_XDP_UMEM feature.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20230927135241.2287547-2-tushar.vyavahare@intel.com
|
|
Add the -h option to display all available command line options
available for test_xsk.sh and xskxceiver.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-11-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In a number of places at en error, exit_with_error() is called that
terminates the whole test suite. This is not always desirable as it
would be more logical to only fail that test and then go along with
the other ones. So change this in a number of places in which I
thought it would be more logical to just fail the test in
question. Examples of this are in code that is only used by a single
test.
Also delete a pointless if-statement in receive_pkts() that has an
exit_with_error() in it. It can never occur since the return value is
an unsigned and the test is for less than zero.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-10-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Use ksft_print_msg() instead of printf() and fprintf() in all places
as the ksefltests framework is being used. There is only one exception
and that is for the list-of-tests print out option, since no tests are
run in that case.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-9-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a command line option to be able to run a single test. This option
(-t) takes a number from the list of tests available with the "-l"
option. Here are two examples:
Run test number 2, the "receive single packet" test in all available modes:
./test_xsk.sh -t 2
Run test number 21, the metadata copy test in skb mode only
./test_xsh.sh -t 21 -m skb
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-8-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a command line option (-l) that lists all the tests. The number
before the test will be used in the next commit for specifying a
single test to run. Here is an example of the output:
Tests:
0: SEND_RECEIVE
1: SEND_RECEIVE_2K_FRAME
2: SEND_RECEIVE_SINGLE_PKT
3: POLL_RX
4: POLL_TX
5: POLL_RXQ_FULL
6: POLL_TXQ_FULL
7: SEND_RECEIVE_UNALIGNED
:
:
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-7-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Declare the test names statically in a struct so that we can refer to
them when adding the support to execute a single test in the next
commit. Before this patch, the names of them were not declared in a
single place which made it not possible to refer to them.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-6-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Prepare for the capability to be able to run a single test by moving
all the tests to their own functions. This function can then be called
to execute that test in the next commit.
Also, the tests named RUN_TO_COMPLETION_* were not named well, so
change them to SEND_RECEIVE_* as it is just a basic send and receive
test of 4K packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-5-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add an option -m on the command line that allows the user to run the
tests in a single mode instead of all of them. Valid modes are skb,
drv, and zc (zero-copy). An example:
To run test suite in drv mode only:
./test_xsk.sh -m drv
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-4-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a timeout for the transmission thread. If packets are not
completed properly, for some reason, the test harness would previously
get stuck forever in a while loop. But with this patch, this timeout
will trigger, flag the test as a failure, and continue with the next
test.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-3-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Print info about every packet in verbose mode, both for Tx and
Rx. This is useful to have when a test fails or to validate that a
test is really doing what it was designed to do. Info on what is
supposed to be received and sent is also printed for the custom packet
streams since they differ from the base line. Here is an example:
Tx addr: 37e0 len: 64 options: 0 pkt_nb: 8
Tx addr: 4000 len: 64 options: 0 pkt_nb: 9
Rx: addr: 100 len: 64 options: 0 pkt_nb: 0 valid: 1
Rx: addr: 1100 len: 64 options: 0 pkt_nb: 1 valid: 1
Rx: addr: 2100 len: 64 options: 0 pkt_nb: 4 valid: 1
Rx: addr: 3100 len: 64 options: 0 pkt_nb: 8 valid: 1
Rx: addr: 4100 len: 64 options: 0 pkt_nb: 9 valid: 1
One pointless verbose print statement is also deleted and another one
is made clearer.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-2-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20230720104815.123146-1-colin.i.king@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add a test that will exercise maximum number of supported fragments.
This number depends on mode of the test - for SKB and DRV it will be 18
whereas for ZC this is defined by a value from NETDEV_A_DEV_XDP_ZC_MAX_SEGS
netlink attribute.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # made use of new netlink attribute
Link: https://lore.kernel.org/r/20230719132421.584801-24-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Enable the already existing metadata copy test to also run in
multi-buffer mode with 9K packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-23-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a test that produces lots of nasty descriptors testing the corner
cases of the descriptor validation. Some of these descriptors are
valid and some are not as indicated by the valid flag. For a
description of all the test combinations, please see the code.
To stress the API, we need to be able to generate combinations of
descriptors that make little sense. A new verbatim mode is introduced
for the packet_stream to accomplish this. In this mode, all packets in
the packet_stream are sent as is. We do not try to chop them up into
frames that are of the right size that we know are going to work as we
would normally do. The packets are just written into the Tx ring even
if we know they make no sense.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # adjusted valid flags for frags
Link: https://lore.kernel.org/r/20230719132421.584801-22-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a test for multi-buffer AF_XDP when using unaligned mode. The test
sends 4096 9K-buffers.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-21-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add the first basic multi-buffer test that sends a stream of 9K
packets and validates that they are received at the other end. In
order to enable sending and receiving multi-buffer packets, code that
sets the MTU is introduced as well as modifications to the XDP
programs so that they signal that they are multi-buffer enabled.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-20-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add the ability to send and receive packets that are larger than the
size of a umem frame, using the AF_XDP /XDP multi-buffer
support. There are three pieces of code that need to be changed to
achieve this: the Rx path, the Tx path, and the validation logic.
Both the Rx path and Tx could only deal with a single fragment per
packet. The Tx path is extended with a new function called
pkt_nb_frags() that can be used to retrieve the number of fragments a
packet will consume. We then create these many fragments in a loop and
fill the N-1 first ones to the max size limit to use the buffer space
efficiently, and the Nth one with whatever data that is left. This
goes on until we have filled in at the most BATCH_SIZE worth of
descriptors and fragments. If we detect that the next packet would
lead to BATCH_SIZE number of fragments sent being exceeded, we do not
send this packet and finish the batch. This packet is instead sent in
the next iteration of BATCH_SIZE fragments.
For Rx, we loop over all fragments we receive as usual, but for every
descriptor that we receive we call a new validation function called
is_frag_valid() to validate the consistency of this fragment. The code
then checks if the packet continues in the next frame. If so, it loops
over the next packet and performs the same validation. once we have
received the last fragment of the packet we also call the function
is_pkt_valid() to validate the packet as a whole. If we get to the end
of the batch and we are not at the end of the current packet, we back
out the partial packet and end the loop. Once we get into the receive
loop next time, we start over from the beginning of that packet. This
so the code becomes simpler at the cost of some performance.
The validation function is_frag_valid() checks that the sequence and
packet numbers are correct at the start and end of each fragment.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-19-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Modify the packet pacing algorithm so that it works with multi-buffer
packets. This algorithm makes sure we do not send too many buffers to
the receiving thread so that packets have to be dropped. The previous
algorithm made the assumption that each packet only consumes one
buffer, but that is not true anymore when multi-buffer support gets
added. Instead, we find out what the largest packet size is in the
packet stream and assume that each packet will consume this many
buffers. This is conservative and overly cautious as there might be
smaller packets in the stream that need fewer buffers per packet. But
it keeps the algorithm simple.
Also simplify it by removing the pthread conditional and just test if
there is enough space in the Rx thread before trying to send one more
batch. Also makes the tests run faster.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-11-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add the ability to generate data in the packets that are correct for
multi-buffer packets. The ethernet header should only go into the
first fragment followed by data and the others should only have
data. We also need to modify the pkt_dump function so that it knows
what fragment has an ethernet header so it can print this.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-10-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Populate the fill ring based on the number of frags a packet
needs. With multi-buffer support, a packet might require more than a
single fragment/buffer, so the function xsk_populate_fill_ring() needs
to consider how many buffers a packet will consume, and put that many
buffers on the fill ring for each packet it should receive. As we are
still not sending any multi-buffer packets, the function will only
produce one buffer per packet at the moment.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-9-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test for hugepages only once at the beginning of the execution of the
whole test suite, instead of before each test that needs huge
pages. These are the tests that use unaligned mode. As more unaligned
tests will be added, so the current system just does not scale.
With this change, there are now three possible outcomes of a test run:
fail, pass, or skip. To simplify the handling of this, the function
testapp_validate_traffic() now returns this value to the main loop. As
this function is used by nearly all tests, it meant a small change to
most of them.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-8-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Store the offset in struct pkt instead of the address. This is
important since address is only meaningful in the context of a packet
that is stored in a single umem buffer and thus a single Tx
descriptor. If the packet, in contrast need to be represented by
multiple buffers in the umem, storing the address makes no sense since
the packet will consist of multiple buffers in the umem at various
addresses. This change is in preparation for the upcoming
multi-buffer support in AF_XDP and the corresponding tests.
So instead of indicating the address, we instead indicate the offset
of the packet in the first buffer. The actual address of the buffer is
allocated from the umem with a new function called
umem_alloc_buffer(). This also means we can get rid of the
use_fill_for_addr flag as the addresses fed into the fill ring will
always be the offset from the pkt specification in the packet stream
plus the address of the allocated buffer from the umem. No special
casing needed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-7-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Convert the current variable rx_pkt_nb to an iterator that can be used
for both Rx and Tx. This to simplify the code and making Tx more like
Rx that already has this feature.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-6-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Dump the content of the packet when a test finds that packets are
received out of order, the length is wrong, or some other packet
error. Use the already existing pkt_dump function for this and call it
when the above errors are detected. Get rid of the command line option
for dumping packets as it is not useful to print out thousands of
good packets followed by the faulty one you would like to see.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-5-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a varying payload pattern within the packet. Instead of having
just a packet number that is the same for all words in a packet, make
each word different in the packet. The upper 16-bits are set to the
packet number and the lower 16-bits are the sequence number of the
words in this packet. So the 3rd packet's 5th 32-bit word of data will
contain the number (2<<32) | 4 as they are numbered from 0.
This will make it easier to detect fragments that are out of order
when starting to test multi-buffer support.
The member payload in the packet is renamed pkt_nb to reflect that it
is now only a pkt_nb, not the real payload as seen above.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-4-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Implement support for generating pkts with variable length. Before
this patch, they were all 64 bytes, exception for some packets of zero
length and some that were too large. This feature will be used to test
multi-buffer support for which large packets are needed.
The packets are also made simpler, just a valid Ethernet header
followed by a sequence number. This so that it will become easier to
implement packet generation when each packet consists of multiple
fragments. There is also a maintenance burden associated with carrying
all this code for generating proper UDP/IP packets, especially since
they are not needed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-3-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Do not change the XDP program for the Tx thread when not needed. It
was erroneously compared to the XDP program for the Rx thread, which
is always going to be different, which meant that the code made
unnecessary switches to the same program it had before. This did not
affect functionality, just performance.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-2-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Put the flag MAP_HUGE_2MB in the correct flags argument instead of the
wrong offset argument.
Fixes: 2ddade322925 ("selftests/xsk: Fix munmap for hugepage allocated umem")
Reported-by: Kal Cutter Conley <kal.conley@dectris.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230421062208.3772-1-magnus.karlsson@gmail.com
|
|
Fix the unmapping of hugepage allocated umems so that they are
properly unmapped. The new test referred to in the fixes label,
introduced a test that allocated a umem that is not a multiple of a 2M
hugepage size. This is fine for mmap() that rounds the size up the
nearest multiple of 2M. But munmap() requires the size to be a
multiple of the hugepage size in order for it to unmap the region. The
current behaviour of not properly unmapping the umem, was discovered
when further additions of tests that require hugepages (unaligned mode
tests only) started failing as the system was running out of
hugepages.
Fixes: c0801598e543 ("selftests: xsk: Add test UNALIGNED_INV_DESC_4K1_FRAME_SIZE")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230418143617.27762-1-magnus.karlsson@gmail.com
|
|
Add unaligned descriptor test for frame size of 4001. Using an odd frame
size ensures that the end of the UMEM is not near a page boundary. This
allows testing descriptors that staddle the end of the UMEM but not a
page.
This test used to fail without the previous commit ("xsk: Fix unaligned
descriptor validation").
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Link: https://lore.kernel.org/r/20230405235920.7305-3-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Fix flaky STATS_RX_DROPPED test. The receiver calls getsockopt after
receiving the last (valid) packet which is not the final packet sent in
the test (valid and invalid packets are sent in alternating fashion with
the final packet being invalid). Since the last packet may or may not
have been dropped already, both outcomes must be allowed.
This issue could also be fixed by making sure the last packet sent is
valid. This alternative is left as an exercise to the reader (or the
benevolent maintainers of this file).
This problem was quite visible on certain setups. On one machine this
failure was observed 50% of the time.
Also, remove a redundant assignment of pkt_stream->nb_pkts. This field
is already initialized by __pkt_stream_alloc.
Fixes: 27e934bec35b ("selftests: xsk: make stat tests not spin on getsockopt")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230403120400.31018-1-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add test case to testapp_invalid_desc for valid packets at the end of
the UMEM.
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230403145047.33065-3-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Avoid UMEM_SIZE macro in testapp_invalid_desc which is incorrect when
the frame size is not XSK_UMEM__DEFAULT_FRAME_SIZE. Also remove the
macro since it's no longer being used.
Fixes: 909f0e28207c ("selftests: xsk: Add tests for 2K frame size")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230403145047.33065-2-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add a new test in copy-mode for testing the copying of metadata from the
buffer in kernel-space to user-space. This is accomplished by adding a
new XDP program and using the bss map to store a counter that is written
to the metadata field. This counter is incremented for every packet so
that the number becomes unique and should be the same as the payload. It
is store in the bss so the value can be reset between runs.
The XDP program populates the metadata and the userspace program checks
the value stored in the metadata field against the payload using the new
is_metadata_correct() function. To turn this verification on or off, add
a new parameter (use_metadata) to the ifobject structure.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230320102705.306187-1-tushar.vyavahare@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Implement automatic switching of XDP programs and execution modes if
needed by a test. This makes it much simpler to write a test as it
only has to say what XDP program it needs if it is not the default
one. This also makes it possible to remove the initial explicit
attachment of the XDP program as well as the explicit mode switch in
the code. These are now handled by the same code that just checks if a
switch is necessary, so no special cases are needed.
The default XDP program for all tests is one that sends all packets to
the AF_XDP socket. If you need another one, please use the new
function test_spec_set_xdp_prog() to specify what XDP programs and
maps to use for this test.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-16-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
