summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/bpf/prog_tests
AgeCommit message (Collapse)Author
2024-07-01selftests/bpf: Add selftest for bpf_xdp_flow_lookup kfuncLorenzo Bianconi
Introduce e2e selftest for bpf_xdp_flow_lookup kfunc through xdp_flowtable utility. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/b74393fb4539aecbbd5ac7883605f86a95fb0b6b.1719698275.git.lorenzo@kernel.org
2024-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: e3f02f32a050 ("ionic: fix kernel panic due to multi-buffer handling") d9c04209990b ("ionic: Mark error paths in the data path as unlikely") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-26selftests/bpf: Don't close(-1) in serial_test_fexit_stress()Ma Ke
Guard close() with extra link_fd[i] > 0 and fexit_fd[i] > 0 check to prevent close(-1). Signed-off-by: Ma Ke <make24@iscas.ac.cn> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240623131753.2133829-1-make24@iscas.ac.cn
2024-06-25selftests/bpf: add test validating uprobe/uretprobe stack tracesAndrii Nakryiko
Add a set of tests to validate that stack traces captured from or in the presence of active uprobes and uretprobes are valid and complete. For this we use BPF program that are installed either on entry or exit of user function, plus deep-nested USDT. One of target funtions (target_1) is recursive to generate two different entries in the stack trace for the same uprobe/uretprobe, testing potential edge conditions. If there is no fixes, we get something like this for one of the scenarios: caller: 0x758fff - 0x7595ab target_1: 0x758fd5 - 0x758fff target_2: 0x758fca - 0x758fd5 target_3: 0x758fbf - 0x758fca target_4: 0x758fb3 - 0x758fbf ENTRY #0: 0x758fb3 (in target_4) ENTRY #1: 0x758fd3 (in target_2) ENTRY #2: 0x758ffd (in target_1) ENTRY #3: 0x7fffffffe000 ENTRY #4: 0x7fffffffe000 ENTRY #5: 0x6f8f39 ENTRY #6: 0x6fa6f0 ENTRY #7: 0x7f403f229590 Entry #3 and #4 (0x7fffffffe000) are uretprobe trampoline addresses which obscure actual target_1 and another target_1 invocations. Also note that between entry #0 and entry #1 we are missing an entry for target_3. With fixes, we get desired full stack traces: caller: 0x758fff - 0x7595ab target_1: 0x758fd5 - 0x758fff target_2: 0x758fca - 0x758fd5 target_3: 0x758fbf - 0x758fca target_4: 0x758fb3 - 0x758fbf ENTRY #0: 0x758fb7 (in target_4) ENTRY #1: 0x758fc8 (in target_3) ENTRY #2: 0x758fd3 (in target_2) ENTRY #3: 0x758ffd (in target_1) ENTRY #4: 0x758ff3 (in target_1) ENTRY #5: 0x75922c (in caller) ENTRY #6: 0x6f8f39 ENTRY #7: 0x6fa6f0 ENTRY #8: 0x7f986adc4cd0 Now there is a logical and complete sequence of function calls. Link: https://lore.kernel.org/all/20240522013845.1631305-5-andrii@kernel.org/ Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-06-24selftests/bpf: Add more ring buffer test coverageDaniel Borkmann
Add test coverage for reservations beyond the ring buffer size in order to validate that bpf_ringbuf_reserve() rejects the request with NULL, all other ring buffer tests keep passing as well: # ./vmtest.sh -- ./test_progs -t ringbuf [...] ./test_progs -t ringbuf [ 1.165434] bpf_testmod: loading out-of-tree module taints kernel. [ 1.165825] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel [ 1.284001] tsc: Refined TSC clocksource calibration: 3407.982 MHz [ 1.286871] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc34e357, max_idle_ns: 440795379773 ns [ 1.289555] clocksource: Switched to clocksource tsc #274/1 ringbuf/ringbuf:OK #274/2 ringbuf/ringbuf_n:OK #274/3 ringbuf/ringbuf_map_key:OK #274/4 ringbuf/ringbuf_write:OK #274 ringbuf:OK #275 ringbuf_multi:OK [...] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> [ Test fixups for getting BPF CI back to work ] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240621140828.18238-2-daniel@iogearbox.net
2024-06-21selftests/bpf: Add kfunc_call test for simple dtor in bpf_testmodAlan Maguire
add simple kfuncs to create/destroy a context type to bpf_testmod, register them and add a kfunc_call test to use them. This provides test coverage for registration of dtor kfuncs from modules. By transferring the context pointer to a map value as a __kptr we also trigger the map-based dtor cleanup logic, improving test coverage. Suggested-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240620091733.1967885-7-alan.maguire@oracle.com
2024-06-21selftests/bpf: Test struct_ops bpf map auto-attachMykyta Yatsenko
Adding selftest to verify that struct_ops maps are auto attached by bpf skeleton's `*__attach` function. Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240621180324.238379-1-yatsenko@meta.com
2024-06-20selftests/bpf: Use start_server_str in mptcpGeliang Tang
Since start_server_str() is added now, it can be used in mptcp.c in start_mptcp_server() instead of using helpers make_sockaddr() and start_server_addr() to simplify the code. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Link: https://lore.kernel.org/r/16fb3e2cd60b64b5470b0e69f1aa233feaf2717c.1718932493.git.tanggeliang@kylinos.cn Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-06-20selftests/bpf: Drop noconnect from network_helper_optsGeliang Tang
In test_bpf_ip_check_defrag_ok(), the new helper client_socket() can be used to replace connect_to_fd_opts() with "noconnect" opts, and the strcut member "noconnect" of network_helper_opts can be dropped now, always connect to server in connect_to_fd_opts(). Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Link: https://lore.kernel.org/r/f45760becce51986e4e08283c7df0f933eb0da14.1718932493.git.tanggeliang@kylinos.cn Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-06-20selftests/bpf: Drop type from network_helper_optsGeliang Tang
The opts.{type, noconnect} is at least a bit non intuitive or unnecessary. The only use case now is in test_bpf_ip_check_defrag_ok which ends up bypassing most (or at least some) of the connect_to_fd_opts() logic. It's much better that test should have its own connect_to_fd_opts() instead. This patch adds a new "type" parameter for connect_to_fd_opts(), then opts->type and getsockopt(SO_TYPE) can be replaced by "type" parameter in it. In connect_to_fd(), use getsockopt(SO_TYPE) to get "type" value and pass it to connect_to_fd_opts(). In bpf_tcp_ca.c and cgroup_v1v2.c, "SOCK_STREAM" types are passed to connect_to_fd_opts(), and in ip_check_defrag.c, different types "SOCK_RAW" and "SOCK_DGRAM" are passed to it. With these changes, the strcut member "type" of network_helper_opts can be dropped now. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Link: https://lore.kernel.org/r/cfd20b5ad4085c1d1af5e79df3b09013a407199f.1718932493.git.tanggeliang@kylinos.cn Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c 1e7962114c10 ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error") 165f87691a89 ("bnxt_en: add timestamping statistics support") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-17selftests/bpf: Extend distilled BTF tests to cover BTF relocationAlan Maguire
Ensure relocated BTF looks as expected; in this case identical to original split BTF, with a few duplicate anonymous types added to split BTF by the relocation process. Also add relocation tests for edge cases like missing type in base BTF and multiple types of the same name. Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/bpf/20240613095014.357981-5-alan.maguire@oracle.com
2024-06-17selftests/bpf: Test distilled base, split BTF generationAlan Maguire
Test generation of split+distilled base BTF, ensuring that - named base BTF STRUCTs and UNIONs are represented as 0-vlen sized STRUCT/UNIONs - named ENUM[64]s are represented as 0-vlen named ENUM[64]s - anonymous struct/unions are represented in full in split BTF - anonymous enums are represented in full in split BTF - types unreferenced from split BTF are not present in distilled base BTF Also test that with vmlinux BTF and split BTF based upon it, we only represent needed base types referenced from split BTF in distilled base. Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/bpf/20240613095014.357981-3-alan.maguire@oracle.com
2024-06-13selftests: bpf: add testmod kfunc for nullable paramsVadim Fedorenko
Add special test to be sure that only __nullable BTF params can be replaced by NULL. This patch adds fake kfuncs in bpf_testmod to properly test different params. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Link: https://lore.kernel.org/r/20240613211817.1551967-6-vadfed@meta.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-06-13selftests/bpf: Add test coverage for reg_set_min_max handlingDaniel Borkmann
Add a test case for the jmp32/k fix to ensure selftests have coverage. Before fix: # ./vmtest.sh -- ./test_progs -t verifier_or_jmp32_k [...] ./test_progs -t verifier_or_jmp32_k tester_init:PASS:tester_log_buf 0 nsec process_subtest:PASS:obj_open_mem 0 nsec process_subtest:PASS:specs_alloc 0 nsec run_subtest:PASS:obj_open_mem 0 nsec run_subtest:FAIL:unexpected_load_success unexpected success: 0 #492/1 verifier_or_jmp32_k/or_jmp32_k: bit ops + branch on unknown value:FAIL #492 verifier_or_jmp32_k:FAIL Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED After fix: # ./vmtest.sh -- ./test_progs -t verifier_or_jmp32_k [...] ./test_progs -t verifier_or_jmp32_k #492/1 verifier_or_jmp32_k/or_jmp32_k: bit ops + branch on unknown value:OK #492 verifier_or_jmp32_k:OK Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20240613115310.25383-3-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-06-13selftests/bpf: Validate CHECKSUM_COMPLETE optionVadim Fedorenko
Adjust skb program test to run with checksum validation. Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240606145851.229116-2-vadfed@meta.com
2024-06-12selftests/bpf: Add uretprobe shadow stack testJiri Olsa
Adding uretprobe shadow stack test that runs all existing uretprobe tests with shadow stack enabled if it's available. Link: https://lore.kernel.org/all/20240611112158.40795-9-jolsa@kernel.org/ Acked-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-06-12selftests/bpf: Add uretprobe syscall call from user space testJiri Olsa
Adding test to verify that when called from outside of the trampoline provided by kernel, the uretprobe syscall will cause calling process to receive SIGILL signal and the attached bpf program is not executed. Link: https://lore.kernel.org/all/20240611112158.40795-8-jolsa@kernel.org/ Acked-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-06-12selftests/bpf: Add uretprobe syscall test for regs changesJiri Olsa
Adding test that creates uprobe consumer on uretprobe which changes some of the registers. Making sure the changed registers are propagated to the user space when the ureptobe syscall trampoline is used on x86_64. To be able to do this, adding support to bpf_testmod to create uprobe via new attribute file: /sys/kernel/bpf_testmod_uprobe This file is expecting file offset and creates related uprobe on current process exe file and removes existing uprobe if offset is 0. The can be only single uprobe at any time. The uprobe has specific consumer that changes registers used in ureprobe syscall trampoline and which are later checked in the test. Link: https://lore.kernel.org/all/20240611112158.40795-7-jolsa@kernel.org/ Acked-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-06-12selftests/bpf: Add uretprobe syscall test for regs integrityJiri Olsa
Add uretprobe syscall test that compares register values before and after the uretprobe is hit. It also compares the register values seen from attached bpf program. Link: https://lore.kernel.org/all/20240611112158.40795-6-jolsa@kernel.org/ Acked-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-06-10Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2024-06-06 We've added 54 non-merge commits during the last 10 day(s) which contain a total of 50 files changed, 1887 insertions(+), 527 deletions(-). The main changes are: 1) Add a user space notification mechanism via epoll when a struct_ops object is getting detached/unregistered, from Kui-Feng Lee. 2) Big batch of BPF selftest refactoring for sockmap and BPF congctl tests, from Geliang Tang. 3) Add BTF field (type and string fields, right now) iterator support to libbpf instead of using existing callback-based approaches, from Andrii Nakryiko. 4) Extend BPF selftests for the latter with a new btf_field_iter selftest, from Alan Maguire. 5) Add new kfuncs for a generic, open-coded bits iterator, from Yafang Shao. 6) Fix BPF selftests' kallsyms_find() helper under kernels configured with CONFIG_LTO_CLANG_THIN, from Yonghong Song. 7) Remove a bunch of unused structs in BPF selftests, from David Alan Gilbert. 8) Convert test_sockmap section names into names understood by libbpf so it can deduce program type and attach type, from Jakub Sitnicki. 9) Extend libbpf with the ability to configure log verbosity via LIBBPF_LOG_LEVEL environment variable, from Mykyta Yatsenko. 10) Fix BPF selftests with regards to bpf_cookie and find_vma flakiness in nested VMs, from Song Liu. 11) Extend riscv32/64 JITs to introduce shift/add helpers to generate Zba optimization, from Xiao Wang. 12) Enable BPF programs to declare arrays and struct fields with kptr, bpf_rb_root, and bpf_list_head, from Kui-Feng Lee. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits) selftests/bpf: Drop useless arguments of do_test in bpf_tcp_ca selftests/bpf: Use start_test in test_dctcp in bpf_tcp_ca selftests/bpf: Use start_test in test_dctcp_fallback in bpf_tcp_ca selftests/bpf: Add start_test helper in bpf_tcp_ca selftests/bpf: Use connect_to_fd_opts in do_test in bpf_tcp_ca libbpf: Auto-attach struct_ops BPF maps in BPF skeleton selftests/bpf: Add btf_field_iter selftests selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT libbpf: Remove callback-based type/string BTF field visitor helpers bpftool: Use BTF field iterator in btfgen libbpf: Make use of BTF field iterator in BTF handling code libbpf: Make use of BTF field iterator in BPF linker code libbpf: Add BTF field iterator selftests/bpf: Ignore .llvm.<hash> suffix in kallsyms_find() selftests/bpf: Fix bpf_cookie and find_vma in nested VM selftests/bpf: Test global bpf_list_head arrays. selftests/bpf: Test global bpf_rb_root arrays and fields in nested struct types. selftests/bpf: Test kptr arrays and kptrs in nested struct fields. bpf: limit the number of levels of a nested struct type. bpf: look into the types of the fields of a struct type recursively. ... ==================== Link: https://lore.kernel.org/r/20240606223146.23020-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-06selftests/bpf: Drop useless arguments of do_test in bpf_tcp_caGeliang Tang
bpf_map_lookup_elem() has been removed from do_test(), it makes the sk_stg_map argument of do_test() useless. In addition, two exactly the same opts are passed in all the places where do_test() is invoked, so cli_opts argument can be dropped too. This patch drops these two useless arguments of do_test() in bpf_tcp_ca.c. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/7056eab111d78a05bce29d2821228dc93f240de4.1717054461.git.tanggeliang@kylinos.cn
2024-06-06selftests/bpf: Use start_test in test_dctcp in bpf_tcp_caGeliang Tang
The "if (sk_stg_map)" block in do_test() is only used by test_dctcp(), it makes sense to move it from do_test() into test_dctcp(). Then do_test() can be used by other tests except test_dctcp(). Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/9938916627b9810c877e5c03a621bc0ba5acf5c5.1717054461.git.tanggeliang@kylinos.cn
2024-06-06selftests/bpf: Use start_test in test_dctcp_fallback in bpf_tcp_caGeliang Tang
The newly added helper start_test() can be used in test_dctcp_fallback() too, to replace start_server_str() and connect_to_fd_opts(). In that way, two network_helper_opts srv_opts and cli_opts are used instead of the previously shared opts. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/792ca3bb013fa06e618176da02d75e4f79a76733.1717054461.git.tanggeliang@kylinos.cn
2024-06-06selftests/bpf: Add start_test helper in bpf_tcp_caGeliang Tang
For moving the "if (sk_stg_map)" block out of do_test(), extract the code before this block as a new function start_test(). It creates server-side and client-side sockets and returns them to the caller. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/48f2921ff9be958f5d3d28fe6bb7269a61cafa9f.1717054461.git.tanggeliang@kylinos.cn
2024-06-06selftests/bpf: Use connect_to_fd_opts in do_test in bpf_tcp_caGeliang Tang
This patch uses connect_to_fd_opts() instead of using connect_fd_to_fd() and settcpca() in do_test() in prog_tests/bpf_tcp_ca.c to accept a struct network_helper_opts argument. Then define a dctcp dedicated post_socket_cb callback stg_post_socket_cb(), invoking both settcpca() and bpf_map_update_elem() in it, and set it in test_dctcp(). For passing map_fd into stg_post_socket_cb() callback, a new member map_fd is added in struct cb_opts. Add another "const struct network_helper_opts *cli_opts" to do_test() to separate it from the server "opts". Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/876ec90430865bc468e3b7f6fb2648420b075548.1717054461.git.tanggeliang@kylinos.cn
2024-06-06selftests/bpf: Add btf_field_iter selftestsAlan Maguire
The added selftests verify that for every BTF kind we iterate correctly over consituent strings and ids. Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240605153314.3727466-1-alan.maguire@oracle.com
2024-06-06selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRTYonghong Song
Alexei reported that send_signal test may fail with nested CONFIG_PARAVIRT configs. In this particular case, the base VM is AMD with 166 cpus, and I run selftests with regular qemu on top of that and indeed send_signal test failed. I also tried with an Intel box with 80 cpus and there is no issue. The main qemu command line includes: -enable-kvm -smp 16 -cpu host The failure log looks like: $ ./test_progs -t send_signal [ 48.501588] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [test_progs:2225] [ 48.503622] Modules linked in: bpf_testmod(O) [ 48.503622] CPU: 9 PID: 2225 Comm: test_progs Tainted: G O 6.9.0-08561-g2c1713a8f1c9-dirty #69 [ 48.507629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 48.511635] RIP: 0010:handle_softirqs+0x71/0x290 [ 48.511635] Code: [...] 10 0a 00 00 00 31 c0 65 66 89 05 d5 f4 fa 7e fb bb ff ff ff ff <49> c7 c2 cb [ 48.518527] RSP: 0018:ffffc90000310fa0 EFLAGS: 00000246 [ 48.519579] RAX: 0000000000000000 RBX: 00000000ffffffff RCX: 00000000000006e0 [ 48.522526] RDX: 0000000000000006 RSI: ffff88810791ae80 RDI: 0000000000000000 [ 48.523587] RBP: ffffc90000fabc88 R08: 00000005a0af4f7f R09: 0000000000000000 [ 48.525525] R10: 0000000561d2f29c R11: 0000000000006534 R12: 0000000000000280 [ 48.528525] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 48.528525] FS: 00007f2f2885cd00(0000) GS:ffff888237c40000(0000) knlGS:0000000000000000 [ 48.531600] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.535520] CR2: 00007f2f287059f0 CR3: 0000000106a28002 CR4: 00000000003706f0 [ 48.537538] Call Trace: [ 48.537538] <IRQ> [ 48.537538] ? watchdog_timer_fn+0x1cd/0x250 [ 48.539590] ? lockup_detector_update_enable+0x50/0x50 [ 48.539590] ? __hrtimer_run_queues+0xff/0x280 [ 48.542520] ? hrtimer_interrupt+0x103/0x230 [ 48.544524] ? __sysvec_apic_timer_interrupt+0x4f/0x140 [ 48.545522] ? sysvec_apic_timer_interrupt+0x3a/0x90 [ 48.547612] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.547612] ? handle_softirqs+0x71/0x290 [ 48.547612] irq_exit_rcu+0x63/0x80 [ 48.551585] sysvec_apic_timer_interrupt+0x75/0x90 [ 48.552521] </IRQ> [ 48.553529] <TASK> [ 48.553529] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.555609] RIP: 0010:finish_task_switch.isra.0+0x90/0x260 [ 48.556526] Code: [...] 9f 58 0a 00 00 48 85 db 0f 85 89 01 00 00 4c 89 ff e8 53 d9 bd 00 fb 66 90 <4d> 85 ed 74 [ 48.562524] RSP: 0018:ffffc90000fabd38 EFLAGS: 00000282 [ 48.563589] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff83385620 [ 48.563589] RDX: ffff888237c73ae4 RSI: 0000000000000000 RDI: ffff888237c6fd00 [ 48.568521] RBP: ffffc90000fabd68 R08: 0000000000000000 R09: 0000000000000000 [ 48.569528] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8881009d0000 [ 48.573525] R13: ffff8881024e5400 R14: ffff88810791ae80 R15: ffff888237c6fd00 [ 48.575614] ? finish_task_switch.isra.0+0x8d/0x260 [ 48.576523] __schedule+0x364/0xac0 [ 48.577535] schedule+0x2e/0x110 [ 48.578555] pipe_read+0x301/0x400 [ 48.579589] ? destroy_sched_domains_rcu+0x30/0x30 [ 48.579589] vfs_read+0x2b3/0x2f0 [ 48.579589] ksys_read+0x8b/0xc0 [ 48.583590] do_syscall_64+0x3d/0xc0 [ 48.583590] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 48.586525] RIP: 0033:0x7f2f28703fa1 [ 48.587592] Code: [...] 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 80 3d c5 23 14 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 [ 48.593534] RSP: 002b:00007ffd90f8cf88 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 48.595589] RAX: ffffffffffffffda RBX: 00007ffd90f8d5e8 RCX: 00007f2f28703fa1 [ 48.595589] RDX: 0000000000000001 RSI: 00007ffd90f8cfb0 RDI: 0000000000000006 [ 48.599592] RBP: 00007ffd90f8d2f0 R08: 0000000000000064 R09: 0000000000000000 [ 48.602527] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 48.603589] R13: 00007ffd90f8d608 R14: 00007f2f288d8000 R15: 0000000000f6bdb0 [ 48.605527] </TASK> In the test, two processes are communicating through pipe. Further debugging with strace found that the above splat is triggered as read() syscall could not receive the data even if the corresponding write() syscall in another process successfully wrote data into the pipe. The failed subtest is "send_signal_perf". The corresponding perf event has sample_period 1 and config PERF_COUNT_SW_CPU_CLOCK. sample_period 1 means every overflow event will trigger a call to the BPF program. So I suspect this may overwhelm the system. So I increased the sample_period to 100,000 and the test passed. The sample_period 10,000 still has the test failed. In other parts of selftest, e.g., [1], sample_freq is used instead. So I decided to use sample_freq = 1,000 since the test can pass as well. [1] https://lore.kernel.org/bpf/20240604070700.3032142-1-song@kernel.org/ Reported-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240605201203.2603846-1-yonghong.song@linux.dev
2024-06-04selftests/bpf: Fix bpf_cookie and find_vma in nested VMSong Liu
bpf_cookie and find_vma are flaky in nested VMs, which is used by some CI systems. It turns out these failures are caused by unreliable perf event in nested VM. Fix these by: 1. Use PERF_COUNT_SW_CPU_CLOCK in find_vma; 2. Increase sample_freq in bpf_cookie. Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240604070700.3032142-1-song@kernel.org
2024-06-03selftests/bpf: Test global bpf_list_head arrays.Kui-Feng Lee
Make sure global arrays of bpf_list_heads and fields of bpf_list_heads in nested struct types work correctly. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com> Link: https://lore.kernel.org/r/20240523174202.461236-10-thinker.li@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-06-03selftests/bpf: Test global bpf_rb_root arrays and fields in nested struct types.Kui-Feng Lee
Make sure global arrays of bpf_rb_root and fields of bpf_rb_root in nested struct types work correctly. Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com> Link: https://lore.kernel.org/r/20240523174202.461236-9-thinker.li@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-06-03selftests/bpf: Test kptr arrays and kptrs in nested struct fields.Kui-Feng Lee
Make sure that BPF programs can declare global kptr arrays and kptr fields in struct types that is the type of a global variable or the type of a nested descendant field in a global variable. An array with only one element is special case, that it treats the element like a non-array kptr field. Nested arrays are also tested to ensure they are handled properly. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com> Link: https://lore.kernel.org/r/20240523174202.461236-8-thinker.li@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-06-03selftests/bpf: Remove unused struct 'scale_test_def'Dr. David Alan Gilbert
'scale_test_def' is unused since commit 3762a39ce85f ("selftests/bpf: Split out bpf_verif_scale selftests into multiple tests"). Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240602234112.225107-2-linux@treblig.org
2024-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/ti/icssg/icssg_classifier.c abd5576b9c57 ("net: ti: icssg-prueth: Add support for ICSSG switch firmware") 56a5cf538c3f ("net: ti: icssg-prueth: Fix start counter for ft1 filter") https://lore.kernel.org/all/20240531123822.3bb7eadf@canb.auug.org.au/ No other adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-30selftests/bpf: test struct_ops with epollKui-Feng Lee
Verify whether a user space program is informed through epoll with EPOLLHUP when a struct_ops object is detached. The BPF code in selftests/bpf/progs/struct_ops_module.c has become complex. Therefore, struct_ops_detach.c has been added to segregate the BPF code for detachment tests from the BPF code for other tests based on the recommendation of Andrii Nakryiko. Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com> Link: https://lore.kernel.org/r/20240530065946.979330-6-thinker.li@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-05-29selftests/bpf: Add selftest for bits iterYafang Shao
Add test cases for the bits iter: - Positive cases - Bit mask representing a single word (8-byte unit) - Bit mask representing data spanning more than one word - The index of the set bit - Nagative cases - bpf_iter_bits_destroy() is required after calling bpf_iter_bits_new() - bpf_iter_bits_destroy() can only destroy an initialized iter - bpf_iter_bits_next() must use an initialized iter - Bit mask representing zero words - Bit mask representing fewer words than expected - Case for ENOMEM - Case for NULL pointer Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240517023034.48138-3-laoar.shao@gmail.com
2024-05-28selftests/bpf: Use start_server_str in do_test in bpf_tcp_caGeliang Tang
This patch uses new helper start_server_str() in do_test() in bpf_tcp_ca.c to accept a struct network_helper_opts argument instead of using start_server() and settcpca(). Then change the type of the first paramenter of do_test() into a struct network_helper_opts one. Define its own cb_opts and opts for each test, set its own cc name into cb_opts.cc, and cc_cb() into post_socket_cb callback, then pass it to do_test(). Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Link: https://lore.kernel.org/r/6e1b6555e3284e77c8aa60668c61a66c5f99aa37.1716638248.git.tanggeliang@kylinos.cn Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-05-28selftests/bpf: Use post_socket_cb in start_server_strGeliang Tang
This patch uses start_server_str() helper in test_dctcp_fallback() in bpf_tcp_ca.c, instead of using start_server() and settcpca(). For support opts in start_server_str() helper, opts->cb_opts needs to be passed to post_socket_cb() in __start_server(). Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Link: https://lore.kernel.org/r/414c749321fa150435f7fe8e12c80fec8b447c78.1716638248.git.tanggeliang@kylinos.cn Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-05-28selftests/bpf: Use post_socket_cb in connect_to_fd_optsGeliang Tang
Since the post_socket_cb() callback is added in struct network_helper_opts, it's make sense to use it not only in __start_server(), but also in connect_to_fd_opts(). Then it can be used to set TCP_CONGESTION sockopt. Add a "void *" type member cb_opts into struct network_helper_opts, and add a new struct named cb_opts in prog_tests/bpf_tcp_ca.c, then cc can be moved into struct cb_opts from network_helper_opts. Define a new callback cc_cb() to set TCP_CONGESTION sockopt, and set it to post_socket_cb pointer of opts. Define a new cb_opts cubic, set it to cb_opts of opts. Pass this opts to connect_to_fd_opts() in test_dctcp_fallback(). Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Link: https://lore.kernel.org/r/b512bb8d8f6854c9ea5c409b69d1bf37c6f272c6.1716638248.git.tanggeliang@kylinos.cn Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-05-28selftests/bpf: Drop struct post_socket_optsGeliang Tang
It's not possible to have one generic/common "struct post_socket_opts" for all tests. It's better to have the individual test define its own callback opts struct. So this patch drops struct post_socket_opts, and changes the second parameter of post_socket_cb as "void *" type. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Link: https://lore.kernel.org/r/f8bda41c7cb9cb6979b2779f89fb3a684234304f.1716638248.git.tanggeliang@kylinos.cn Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-05-27selftests/bpf: Cover verifier checks for mutating sockmap/sockhashJakub Sitnicki
Verifier enforces that only certain program types can mutate sock{map,hash} maps, that is update it or delete from it. Add test coverage for these checks so we don't regress. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20240527-sockmap-verify-deletes-v1-3-944b372f2101@cloudflare.com
2024-05-25selftests/bpf: Add netkit test for pkt_typeDaniel Borkmann
Add a test case to assert that the skb->pkt_type which was set from the BPF program is retained from the netkit xmit side to the peer's device at tcx ingress location. # ./vmtest.sh -- ./test_progs -t netkit [...] ./test_progs -t netkit [ 1.140780] bpf_testmod: loading out-of-tree module taints kernel. [ 1.141127] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel [ 1.284601] tsc: Refined TSC clocksource calibration: 3408.006 MHz [ 1.286672] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd9b189d, max_idle_ns: 440795225691 ns [ 1.290384] clocksource: Switched to clocksource tsc #345 tc_netkit_basic:OK #346 tc_netkit_device:OK #347 tc_netkit_multi_links:OK #348 tc_netkit_multi_opts:OK #349 tc_netkit_neigh_links:OK #350 tc_netkit_pkt_type:OK Summary: 6/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20240524163619.26001-4-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-05-25selftests/bpf: Add netkit tests for mac addressDaniel Borkmann
This adds simple tests around setting MAC addresses in the different netkit modes. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20240524163619.26001-3-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-05-25selftests/bpf: extend multi-uprobe tests with USDTsAndrii Nakryiko
Validate libbpf's USDT-over-multi-uprobe logic by adding USDTs to existing multi-uprobe tests. This checks correct libbpf fallback to singular uprobes (when run on older kernels with buggy PID filtering). We reuse already established child process and child thread testing infrastructure, so additions are minimal. These test fail on either older kernels or older version of libbpf that doesn't detect PID filtering problems. Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240521163401.3005045-6-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-05-25selftests/bpf: extend multi-uprobe tests with child thread caseAndrii Nakryiko
Extend existing multi-uprobe tests to test that PID filtering works correctly. We already have child *process* tests, but we need also child *thread* tests. This patch adds spawn_thread() helper to start child thread, wait for it to be ready, and then instruct it to trigger desired uprobes. Additionally, we extend BPF-side code to track thread ID, not just process ID. Also we detect whether extraneous triggerings with unexpected process IDs happened, and validate that none of that happened in practice. These changes prove that fixed PID filtering logic for multi-uprobe works as expected. These tests fail on old kernels. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20240521163401.3005045-5-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-05-25bpf: fix multi-uprobe PID filtering logicAndrii Nakryiko
Current implementation of PID filtering logic for multi-uprobes in uprobe_prog_run() is filtering down to exact *thread*, while the intent for PID filtering it to filter by *process* instead. The check in uprobe_prog_run() also differs from the analogous one in uprobe_multi_link_filter() for some reason. The latter is correct, checking task->mm, not the task itself. Fix the check in uprobe_prog_run() to perform the same task->mm check. While doing this, we also update get_pid_task() use to use PIDTYPE_TGID type of lookup, given the intent is to get a representative task of an entire process. This doesn't change behavior, but seems more logical. It would hold task group leader task now, not any random thread task. Last but not least, given multi-uprobe support is half-broken due to this PID filtering logic (depending on whether PID filtering is important or not), we need to make it easy for user space consumers (including libbpf) to easily detect whether PID filtering logic was already fixed. We do it here by adding an early check on passed pid parameter. If it's negative (and so has no chance of being a valid PID), we return -EINVAL. Previous behavior would eventually return -ESRCH ("No process found"), given there can't be any process with negative PID. This subtle change won't make any practical change in behavior, but will allow applications to detect PID filtering fixes easily. Libbpf fixes take advantage of this in the next patch. Cc: stable@vger.kernel.org Acked-by: Jiri Olsa <jolsa@kernel.org> Fixes: b733eeade420 ("bpf: Add pid filter support for uprobe_multi link") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240521163401.3005045-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-05-23selftests/bpf: Handle forwarding of UDP CLOCK_TAI packetsAbhishek Chauhan
With changes in the design to forward CLOCK_TAI in the skbuff framework, existing selftest framework needs modification to handle forwarding of UDP packets with CLOCK_TAI as clockid. Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com> Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20240509211834.3235191-4-quic_abchauha@quicinc.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-05-22selftests/bpf: Update tests for new ct zone opts for nf_conntrack kfuncsBrad Cowie
Add test for allocating and looking up ct entry in a non-default ct zone with kfuncs bpf_{xdp,skb}_ct_alloc and bpf_{xdp,skb}_ct_lookup. Add negative tests for looking up ct entry in a different ct zone to where it was allocated and with a different direction. Update reserved test for old struct definition to test for ct_zone_id being set when opts size isn't NF_BPF_CT_OPTS_SZ (16). Signed-off-by: Brad Cowie <brad@faucet.nz> Link: https://lore.kernel.org/r/20240522050712.732558-2-brad@faucet.nz Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-05-17selftests/bpf: Adjust btf_dump test to reflect recent change in file_operationsMartin KaFai Lau
The btf_dump test fails: test_btf_dump_struct_data:FAIL:file_operations unexpected file_operations: actual '(struct file_operations){ .owner = (struct module *)0xffffffffffffffff, .fop_flags = (fop_flags_t)4294967295, .llseek = (loff_t (*)(struct f' != expected '(struct file_operations){ .owner = (struct module *)0xffffffffffffffff, .llseek = (loff_t (*)(struct file *, loff_t, int))0xffffffffffffffff,' The "fop_flags" is a recent addition to the struct file_operations in commit 210a03c9d51a ("fs: claw back a few FMODE_* bits") This patch changes the test_btf_dump_struct_data() to reflect this change. Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Link: https://lore.kernel.org/bpf/20240516164310.2481460-1-martin.lau@linux.dev
2024-05-14Merge tag 'net-next-6.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Complete rework of garbage collection of AF_UNIX sockets. AF_UNIX is prone to forming reference count cycles due to fd passing functionality. New method based on Tarjan's Strongly Connected Components algorithm should be both faster and remove a lot of workarounds we accumulated over the years. - Add TCP fraglist GRO support, allowing chaining multiple TCP packets and forwarding them together. Useful for small switches / routers which lack basic checksum offload in some scenarios (e.g. PPPoE). - Support using SMP threads for handling packet backlog i.e. packet processing from software interfaces and old drivers which don't use NAPI. This helps move the processing out of the softirq jumble. - Continue work of converting from rtnl lock to RCU protection. Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link information available via rtnetlink. - Small optimizations from Eric to UDP wake up handling, memory accounting, RPS/RFS implementation, TCP packet sizing etc. - Allow direct page recycling in the bulk API used by XDP, for +2% PPS. - Support peek with an offset on TCP sockets. - Add MPTCP APIs for querying last time packets were received/sent/acked and whether MPTCP "upgrade" succeeded on a TCP socket. - Add intra-node communication shortcut to improve SMC performance. - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver. - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver. - Add reset reasons for tracing what caused a TCP reset to be sent. - Introduce direction attribute for xfrm (IPSec) states. State can be used either for input or output packet processing. Things we sprinkled into general kernel code: - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS(). This required touch-ups and renaming of a few existing users. - Add Endian-dependent __counted_by_{le,be} annotations. - Make building selftests "quieter" by printing summaries like "CC object.o" rather than full commands with all the arguments. Netfilter: - Use GFP_KERNEL to clone elements, to deal better with OOM situations and avoid failures in the .commit step. BPF: - Add eBPF JIT for ARCv2 CPUs. - Support attaching kprobe BPF programs through kprobe_multi link in a session mode, meaning, a BPF program is attached to both function entry and return, the entry program can decide if the return program gets executed and the entry program can share u64 cookie value with return program. "Session mode" is a common use-case for tetragon and bpftrace. - Add the ability to specify and retrieve BPF cookie for raw tracepoint programs in order to ease migration from classic to raw tracepoints. - Add an internal-only BPF per-CPU instruction for resolving per-CPU memory addresses and implement support in x86, ARM64 and RISC-V JITs. This allows inlining functions which need to access per-CPU state. - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various atomics in bpf_arena which can be JITed as a single x86 instruction. Support BPF arena on ARM64. - Add a new bpf_wq API for deferring events and refactor process-context bpf_timer code to keep common code where possible. - Harden the BPF verifier's and/or/xor value tracking. - Introduce crypto kfuncs to let BPF programs call kernel crypto APIs. - Support bpf_tail_call_static() helper for BPF programs with GCC 13. - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF program to have code sections where preemption is disabled. Driver API: - Skip software TC processing completely if all installed rules are marked as HW-only, instead of checking the HW-only flag rule by rule. - Add support for configuring PoE (Power over Ethernet), similar to the already existing support for PoDL (Power over Data Line) config. - Initial bits of a queue control API, for now allowing a single queue to be reset without disturbing packet flow to other queues. - Common (ethtool) statistics for hardware timestamping. Tests and tooling: - Remove the need to create a config file to run the net forwarding tests so that a naive "make run_tests" can exercise them. - Define a method of writing tests which require an external endpoint to communicate with (to send/receive data towards the test machine). Add a few such tests. - Create a shared code library for writing Python tests. Expose the YAML Netlink library from tools/ to the tests for easy Netlink access. - Move netfilter tests under net/, extend them, separate performance tests from correctness tests, and iron out issues found by running them "on every commit". - Refactor BPF selftests to use common network helpers. - Further work filling in YAML definitions of Netlink messages for: nftables, team driver, bonding interfaces, vlan interfaces, VF info, TC u32 mark, TC police action. - Teach Python YAML Netlink to decode attribute policies. - Extend the definition of the "indexed array" construct in the specs to cover arrays of scalars rather than just nests. - Add hyperlinks between definitions in generated Netlink docs. Drivers: - Make sure unsupported flower control flags are rejected by drivers, and make more drivers report errors directly to the application rather than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen). - Ethernet high-speed NICs: - Broadcom (bnxt): - support multiple RSS contexts and steering traffic to them - support XDP metadata - make page pool allocations more NUMA aware - Intel (100G, ice, idpf): - extract datapath code common among Intel drivers into a library - use fewer resources in switchdev by sharing queues with the PF - add PFCP filter support - add Ethernet filter support - use a spinlock instead of HW lock in PTP clock ops - support 5 layer Tx scheduler topology - nVidia/Mellanox: - 800G link modes and 100G SerDes speeds - per-queue IRQ coalescing configuration - Marvell Octeon: - support offloading TC packet mark action - Ethernet NICs consumer, embedded and virtual: - stop lying about skb->truesize in USB Ethernet drivers, it messes up TCP memory calculations - Google cloud vNIC: - support changing ring size via ethtool - support ring reset using the queue control API - VirtIO net: - expose flow hash from RSS to XDP - per-queue statistics - add selftests - Synopsys (stmmac): - support controllers which require an RX clock signal from the MII bus to perform their hardware initialization - TI: - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices - icssg_prueth: add SW TX / RX Coalescing based on hrtimers - cpsw: minimal XDP support - Renesas (ravb): - support describing the MDIO bus - Realtek (r8169): - add support for RTL8168M - Microchip Sparx5: - matchall and flower actions mirred and redirect - Ethernet switches: - nVidia/Mellanox: - improve events processing performance - Marvell: - add support for MV88E6250 family internal PHYs - Microchip: - add DCB and DSCP mapping support for KSZ switches - vsc73xx: convert to PHYLINK - Realtek: - rtl8226b/rtl8221b: add C45 instances and SerDes switching - Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup - Ethernet PHYs: - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY. - micrel: lan8814: add support for PPS out and external timestamp trigger - WiFi: - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers. Modern devices can only be configured using nl80211. - mac80211/cfg80211 - handle color change per link for WiFi 7 Multi-Link Operation - Intel (iwlwifi): - don't support puncturing in 5 GHz - support monitor mode on passive channels - BZ-W device support - P2P with HE/EHT support - re-add support for firmware API 90 - provide channel survey information for Automatic Channel Selection - MediaTek (mt76): - mt7921 LED control - mt7925 EHT radiotap support - mt7920e PCI support - Qualcomm (ath11k): - P2P support for QCA6390, WCN6855 and QCA2066 - support hibernation - ieee80211-freq-limit Device Tree property support - Qualcomm (ath12k): - refactoring in preparation of multi-link support - suspend and hibernation support - ACPI support - debugfs support, including dfs_simulate_radar support - RealTek: - rtw88: RTL8723CS SDIO device support - rtw89: RTL8922AE Wi-Fi 7 PCI device support - rtw89: complete features of new WiFi 7 chip 8922AE including BT-coexistence and Wake-on-WLAN - rtw89: use BIOS ACPI settings to set TX power and channels - rtl8xxxu: enable Management Frame Protection (MFP) support - Bluetooth: - support for Intel BlazarI and Filmore Peak2 (BE201) - support for MediaTek MT7921S SDIO - initial support for Intel PCIe BT driver - remove HCI_AMP support" * tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits) selftests: netfilter: fix packetdrill conntrack testcase net: gro: fix napi_gro_cb zeroed alignment Bluetooth: btintel_pcie: Refactor and code cleanup Bluetooth: btintel_pcie: Fix warning reported by sparse Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1 Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config Bluetooth: btintel_pcie: Fix compiler warnings Bluetooth: btintel_pcie: Add *setup* function to download firmware Bluetooth: btintel_pcie: Add support for PCIe transport Bluetooth: btintel: Export few static functions Bluetooth: HCI: Remove HCI_AMP support Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() Bluetooth: qca: Fix error code in qca_read_fw_build_info() Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning Bluetooth: btintel: Add support for Filmore Peak2 (BE201) Bluetooth: btintel: Add support for BlazarI LE Create Connection command timeout increased to 20 secs dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth Bluetooth: compute LE flow credits based on recvbuf space Bluetooth: hci_sync: Use cmd->num_cis instead of magic number ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 12:33:58 +0000