| Age | Commit message (Collapse) | Author |
|---|
|
Add 129th region into the memblock, and this will trigger the
memblock_double_array() function, this needs valid memory regions. So
using dummy_physical_memory_init() to allocate a large enough memory
region, and split it into a large enough memory which can be choosed by
memblock_double_array(), and the left memory will be split into small
memory region, and add them into the memblock. It make sure the
memblock_double_array() will always choose the valid memory region that
is allocated by the dummy_physical_memory_init().
So memblock_double_array() must success.
Another thing should be done is to restore the memory.regions after
memblock_double_array(), due to now the memory.regions is pointing to a
memory region allocated by dummy_physical_memory_init(). And it will
affect the subsequent tests if we don't restore the memory region. So
simply record the origin region, and restore it after the test.
Signed-off-by: Shaoqin Huang <shaoqin.huang@intel.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/20221011062128.49359-2-shaoqin.huang@intel.com
|
|
Add function setup_numa_memblock() for setting up a memory layout with
multiple NUMA nodes in a previously allocated dummy physical memory.
This function can be used in place of setup_memblock() in tests that need
to simulate a NUMA system.
setup_numa_memblock():
- allows for setting up a memory layout by specifying the fraction of
MEM_SIZE in each node
Set CONFIG_NODES_SHIFT to 4 when building with NUMA=1 to allow for up to
16 NUMA nodes.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/4566d816a85f009268d4858d1ef06c7571a960f9.1663046060.git.remckee0@gmail.com
|
|
Add an assert in memblock_alloc() tests where allocation is expected to
occur. The assert checks whether the entire chunk of allocated memory is
cleared.
The current memblock_alloc() tests do not check whether the allocated
memory was zeroed. memblock_alloc() should zero the allocated memory since
it is a wrapper for memblock_alloc_try_nid().
Reviewed-by: Shaoqin Huang <shaoqin.huang@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/83ffb941b65074f40eb14552f8bfe5b71fe50abd.1661578349.git.remckee0@gmail.com
|
|
Add a help command line option to the help message. Add the help option
to the short and long options so it will be recognized as a valid
option.
Usage:
$ ./main -h
Or:
$ ./main --help
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/0f3b93a79de78c0da1ca90f74fe35e9a85c7cf93.1660451025.git.remckee0@gmail.com
|
|
Change verbose and movable node build options to run-time options.
Movable node usage:
$ ./main -m
Or:
$ ./main --movable-node
Verbose usage:
$ ./main -v
Or:
$ ./main --verbose
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/20220714031717.12258-1-remckee0@gmail.com
|
|
Add and use functions and macros for printing verbose testing output.
If the Memblock simulator was compiled with VERBOSE=1:
- prefix_push(): appends the given string to a prefix string that will be
printed in test_fail() and test_pass*().
- prefix_pop(): removes the last prefix from the prefix string.
- prefix_reset(): clears the prefix string.
- test_fail(): prints a message after a test fails containing the test
number of the failing test and the prefix.
- test_pass(): prints a message after a test passes containing its test
number and the prefix.
- test_print(): prints the given formatted output string.
- test_pass_pop(): runs test_pass() followed by prefix_pop().
- PREFIX_PUSH(): runs prefix_push(__func__).
If the Memblock simulator was not compiled with VERBOSE=1, these
functions/macros do nothing.
Add the assert wrapper macros ASSERT_EQ(), ASSERT_NE(), and ASSERT_LT().
If the assert condition fails, these macros call test_fail() before
executing assert().
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Shaoqin Huang <shaoqin.huang@intel.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/f234d443fe154d5ae8d8aa07284aff69edfb6f61.1656907314.git.remckee0@gmail.com
|
|
Allocation functions that return virtual addresses (with an exception
of _raw variant) clear the allocated memory after reserving it. This
requires valid memory ranges in memblock.memory.
Introduce memory_block variable to store memory that can be registered
with memblock data structure. Move assert.h and size.h includes to common.h
to share them between the test files.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/dce115503c74a6936c44694b00014658a1bb6522.1646055639.git.karolinadrobnik@gmail.com
|
|
All memblock data structure fields are reset in one function. In some
test cases, it's preferred to reset memory region arrays without
modifying other values like allocation direction flag.
Extract two functions from reset_memblock, so it's possible to reset
different parts of memblock:
- reset_memblock_regions - reset region arrays and their counters
- reset_memblock_attributes - set other fields to their default values
Update checks in basic_api.c to use new definitions. Remove
reset_memblock call from memblock_initialization_check, so the true
initial values are tested.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/5cc1ba9a0ade922dbf4ba450165b81a9ed17d4a9.1646055639.git.karolinadrobnik@gmail.com
|
|
Memblock simulator needs to be able to reset memblock data structures
between different test cases. Add a function that sets all fields to
their default values.
Add a test checking if memblock is being initialized to expected values.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/8c185aa7e0dd68c2c7e937c9a06c90ae413e240f.1643796665.git.karolinadrobnik@gmail.com
|
