| Age | Commit message (Collapse) | Author |
|---|
|
Update version for changes released with v5.10 kernel release.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The reported base-freq high-priority-cpu-list was potentially omitting
some cpus, due to incorrectly using a logical core count to constrain
the size of a physical punit core ID mask. We may need to read both high
and low PBF CORE_MASK values regardless of the logical core count.
Signed-off-by: Jonathan Doman <jonathan.doman@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Update version for changes released with v5.9 kernel release.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Retry mail box command on failure. The default retry count is 3. This can
be changed by "-r|--retry" options. This helps during early bring up of
platforms.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Add option "p|--pause" to introduce delay between two mail box commands
for test purpose. This delay can be specified in milliseconds. By default
there is no delay between two mailbox commands.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
When for some reason, CONFIG_TDP_GET_CORE_MASK mailbox command fails, then
don't continue online/offline operation for perf-profile set-config-level
with "-o" option.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
We want to cache the topology info to a file, which is not preserved
across boot cycle. The current storage in /tmp is getting preserved.
So change the path from /tmp/isst_cpu_topology.dat to
/var/run/isst_cpu_topology.dat.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
The core mask display is wrong in some cases. This is showing more
cpus than the mask has. This is because mask is 64 bit but it used
with BIT() macro to get the presence of CPU which doesn't support
unsigned long long. Added a new macro for BIT_ULL and use that
to get the presence of a CPU.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Increase CPU count so that more than 64 is supported in one request.
For example:
sudo ./intel-speed-select -d --cpu 0-66 core-power assoc -clos 0
The above command stops at 63. With this change, it can support more
CPU numbers from 0-255.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Update version to include 5.8 series enhancements.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
turbo-freq enable, requires clos enable. So this is a two step process,
when "-a" option is used. This is causing confusion to users. So enable
clos by default for turbo-freq enable.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
On CLX-N the perf-profile output is missing the package, die, and cpu
output. On CLX-N the pkg_dev struct will never be evaluated by the core
code so pkg_dev.processed is always 0 and the package, die, and cpu
information is never output.
Set the pkg_dev.processed flag to 1 for CLX-N processors.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: andriy.shevchenko@linux.intel.com
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
|
|
When turbo-freq or base-freq feature is not supported, the enable will
fail. So first check support status and print error.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
This patch fix a spelling typo in error message.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Fair number of changes including bug fixes done to change version.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
When user specifies invalid option, display "Unknown Option: ignore",
instead of "no match". Also display error for garbage on the command
line.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Specifying "avx2" and "avx512" option for display filter doesn't work
with short option "-r", only works with --try-type. Also compare full
6 characters for "avx512" string.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
CLX doesn't have capability to change the feature in the hardware, but
this acts as "--auto | -a" option. So even if user didn't specify the
option, use this as --auto | -a to set cpufreq scaling frequency limits.
Also remove perror with debug_printf as they don't bring any value.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
When --cpu or -c is used to specify target CPUs and non of them are valid,
display error.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
This change adds improved error display and handling for commands related
to core-power feature. The changes include:
- Replace perror with helpful error message
- Use ordered priority for SKX based platform by default as the
proportional priority is not supported
- Don't show weight and epp in help and also give error when user
tries to set them in SKX based platforms
- Range check for epp and weights and display error
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Treat a case when mailbox/mmio command can't be handled by the kernel
drivers when the module is removed or send a command which no driver can
handle. In this case ENOTTY result is returned, so print error.
Also when the isst_if_mmio module is removed, we can't send CLOS message
messages via Mailbox on non SKX based platforms. When this module is
removed, isst_platform_info.mmio_supported is set to 0. So it can't be
used as a condition to send via mailbox. Here replace check for Skylake
based platform to send via mailbox, other platforms can't use mailbox in
lieu of MMIO.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
This change adds improved error display and handling for commands related
to turbo-freq feature. The changes include:
- Replace perror/fprintf with helpful error message
- Error for not specifying TDP level when required
- Show error for invalid bucket number
- Show message to enable core-power before enabling turbo-freq feature
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
This change adds improved error display and handling for commands related
to base-freq feature. The changes include:
- Replace perror/fprintf with helpful error message
- Error for not specifying TDP level when required
- For CLX show help which shows limitation
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Improve output of perf-profile commands:
get-config-enabled
get-lock-status
Instead of showing 0/1, show meaningful strings. Also show error when
command is failed.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Enhance help to specify CPU and clos by an example.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
feature
This change adds improved error display and handling for commands related
to perf-profile feature. The changes include:
- When invalid TDP level is passed. display error and exit
- Replace perror with helpful error message
- Show error when TDP level can't be set
- Print error when information can't be read for a level
- Validate user options for invalid level
- Display error for TDP lock status
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add a common API which can be used to print all error and information
messages. In this way a common format can be used.
For json output an error index in suffixed to make unique error key.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add additional information, which will allow user to detect available
features. This will allow users to check presence of features before
continue to test.
A sample output:
$sudo ./intel-speed-select --info
Intel(R) Speed Select Technology
Executing on CPU model:85[0x55]
Platform: API version : 1
Platform: Driver version : 1
Platform: mbox supported : 1
Platform: mmio supported : 0
Intel(R) SST-PP (feature perf-profile) is not supported
Only performance level 0 (base level) is present
TDP level change control is locked
Intel(R) SST-TF (feature turbo-freq) is supported
Intel(R) SST-BF (feature base-freq) is supported
Intel(R) SST-CP (feature core-power) is supported
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Enhance help message which adds some example. The changes include:
- Print help when options are not recognized.
- For CLX, display only options which are applicable.
- Sort options in alphatical order.
- Disply help() instead of error:
"Feature name and|or command not specified"
- Remove duplicate display of
Intel(R) Speed Select Technology
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
When the device file "/dev/isst_interface" is not present, instead of
failing on access, check at the start and print a helpful warning.
Here CLX platform is an exception, which doesn't depend on the device
file. So continue for CLX platform.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Once the CPU is offline, the topology information (core-id, package-id,
die-id) is not accessible via sysfs. So when user selects a config level
more than base config 0 and offlined CPUs to match the config level,
to return to base config he has to manually online CPUs before. Without
this CPUs information mapping from Punit CPU numbering will lot work
as it needs atlest package id for each CPU.
To avoid this additional steps store the topology information in a file
, which is created on the very first run after boot. Since system boots
in base config and all CPUs are online, we can get information about
every CPU.
Once any of the APIs like get_physical_package_id(),
get_physical_core_id() or get_physical_die_id() fails to read from
sysfs, read from the stored mapping file.
This mapping file is stored in /tmp file system. so on every boot
it is recreated to make sure that any new CPUs are added to the
system before boot are taken into account.
But don't use the stored physical device id when trying to get
information for CPU to send message in for_each_online_package_in_set().
Here use the real value from syfs and in case fails try the next CPU.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
offline
Currently /sys/devices/system/cpu/cpu0/topology/thread_siblings is used to
get the max CPU count. But when CPU0 is offline, then this file will be
absent.
So add processing so that we can get count from any first CPU in the
system. which is online.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
When "-o" option for force online/offline is used with command:
perf-profile set-config-level
If the config level calls for CPU 0 online/offline, then call fails
as there is special kernel setup required for CPU 0 online/offline
and the currently not setup for that.
But when call is for online CPU 0, then don't fail. Just warn that
this system is not setup for CPU 0 online/offline.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
In addition to CLOS enable status, also show the core-power feature
status. This will help why clos enable status didn't give desired
results as the core-power feature may be disabled or unsupported.
The new display looks as follows:
$intel-speed-select core-power info
Intel(R) Speed Select Technology
..
package-0
die-0
cpu-0
core-power
support-status:supported
enable-status:enabled
clos-enable-status:1
priority-type:0
In the above display "support-status" and "enable-status", shows the
status of the core-power feature and "clos-enable-status", shows the
status of the clos.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Currently "-c" is a mandatory option for "core-power info" command. Make
this optional as this is a per package/die property. When not specified,
it will print info for every package/die.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
When CPU is offline, we can't get package id. So print error for this
and don't use output.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Here topology_max_cpus is used for total CPU count, not the last CPU
number. So remove "-1".
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Even for the products using MMIO, this message needs to be sent via
mail box. The previous fix done for this didn't properly address this.
That fix simply removed sending command via MMIO, but still didn't
trigger sending via mailbox.
Add additional condition to check for CLOS_PM_QOS_CONFIG, when MMIO
is supported on a platform.
Fixes: cd0e63706549 (tools/power/x86/intel-speed-select: Use mailbox for CLOS_PM_QOS_CONFIG)
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
When mailbox command for the turbo-freq enable fails, then don't display
result for auto-mode. When turbo-freq enable fails, there is no point
to set CPU priorities.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
As we added new set of mailbox commands, increment version.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
In turbo-freq or base-freq auto mode, for disable, first disable the feature and
then disable clos.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The turbo-freq enable with auto mode, prints result for the last possible
CPU, which is not correct when either CPU is not present or user wants
command to be limited to a single die/package. For example, in the
below command user wants to limit to die/package 0, but the
"turbo-freq --auto" result is displayed using the other package.
$ sudo intel-speed-select -c 0 turbo-freq enable -a
Intel(R) Speed Select Technology
package-0
die-0
cpu-0
turbo-freq
enable:success
package--1
die-0
cpu-31
turbo-freq --auto
enable:success
Since we do have to traverse all CPUs, don't display CPU info for
"turbo-freq --auto", as we already displayed the result for
turbo-freq enable with the CPU information.
With the fix, the same command results in:
$ sudo intel-speed-select -c 0 turbo-freq enable -a
Intel(R) Speed Select Technology
package-0
die-0
cpu-0
turbo-freq
enable:success
turbo-freq --auto
enable:success
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Since the tool now adds support for another Intel SST implementation,
increment version number.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Some firmware implementation gives error when a command is sent get mask
for core count 32-61. So use core count to decide.
But there is no function to get core count. So introduce one function to
get core count.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Speed Select
There are some platforms, where there limited support of Intel(R) SST
features. Here perf-profile has only one base configuration and limited
support of commands. But still has support for discovery of base-freq and
turbo-freq features. So it is important to show minimum features to use
base-freq and turbo-freq features.
Here the change are:
- When there is no support of CONFIG_TDP_GET_LEVELS_INFO, then instead
of treating this as fatal error, treat this with number of config levels
= 0, that means only base level 0 is present.
- There is no support of mail box commands to get base frequencies or
turbo frequencies. Here present base frequency by reading cpufreq
base freq and turbo frequency by reading MSR 0x1AD.
- Don't display any field, which has value == 0.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Use different frequency weights for CLOS 0 and and CLOS1-3, to define
relative priority for power budgeting. This will be used for --auto
mode to enable base-freq and turbo-freq feature.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
To be consistant with the other frequency units, change the CLOS
unit to MHz instead of ratios.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Use mailbox to read/write CLOS_PM_QOS_CONFIG instead of read/write to
MMIO offset.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
There is an expectation in the CLX platform for SST base-freq feature that
Scaling min frequency be different for high and low priority cores.
This is the way the firmware will understand the priority.
So this change will look at high priority and low priority cores, and set
scaling_min_freq to P1High for high priority cores and P1Low to low
priority cores.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
In CLX_N base_frequency is read from cpufreq sysfs, where units are in
KHz. The internal units in the code matches the real ratios which are
in 100MHz scale. So when storing units for CLX-N frequencies, convert
to 100MHz scale.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
