| Age | Commit message (Collapse) | Author |
|---|
|
I sometimes see ("unknown type") in the result and it was because it
didn't check the type of stack variables properly during the instruction
tracking. The stack can carry constant values (without type info) and
if the target instruction is accessing the stack location, it resulted
in the "unknown type".
Maybe we could pick one of integer types for the constant, but it
doesn't really mean anything useful. Let's just drop the stack slot if
it doesn't have a valid type info.
Here's an example how it got the unknown type.
Note that 0xffffff48 = -0xb8.
-----------------------------------------------------------
find data type for 0xffffff48(reg6) at ...
CU for ...
frame base: cfa=0 fbreg=6
scope: [2/2] (die:11cb97f)
bb: [37 - 3a]
var [37] reg15 type='int' size=0x4 (die:0x1180633)
bb: [40 - 4b]
mov [40] imm=0x1 -> reg13
var [45] reg8 type='sigset_t*' size=0x8 (die:0x11a39ee)
mov [45] imm=0x1 -> reg2 <--- here reg2 has a constant
bb: [215 - 237]
mov [218] reg2 -> -0xb8(stack) constant <--- and save it to the stack
mov [225] reg13 -> -0xc4(stack) constant
call [22f] find_task_by_vgpid
call [22f] return -> reg0 type='struct task_struct*' size=0x8 (die:0x11881e8)
bb: [5c8 - 5cf]
bb: [2fb - 302]
mov [2fb] -0xc4(stack) -> reg13 constant
bb: [13b - 14d]
mov [143] 0xd50(reg3) -> reg5 type='struct task_struct*' size=0x8 (die:0xa31f3c)
bb: [153 - 153]
chk [153] reg6 offset=0xffffff48 ok=0 kind=0 fbreg <--- access here
found by insn track: 0xffffff48(reg6) type-offset=0
type='G<EF>^K<F6><AF>U' size=0 (die:0xffffffffffffffff)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240502060011.1838090-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The instruction tracking should be the same for the both registers.
Just do it once and compare the result with multi regs as with the
previous patches.
Then we don't need to call find_data_type_block() separately for each
reg.
Let's remove the 'reg' argument from the relevant functions.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240502060011.1838090-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The following instruction pattern is used to access a global variable.
mov $0x231c0, %rax
movsql %edi, %rcx
mov -0x7dc94ae0(,%rcx,8), %rcx
cmpl $0x0, 0xa60(%rcx,%rax,1) <<<--- here
The first instruction set the address of the per-cpu variable (here, it
is 'runqueues' of type 'struct rq'). The second instruction seems like
a cpu number of the per-cpu base. The third instruction get the base
offset of per-cpu area for that cpu. The last instruction compares the
value of the per-cpu variable at the offset of 0xa60.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240502060011.1838090-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Like per-cpu base offset array, sometimes it accesses the global
variable directly using the offset. Allow this type of instructions as
long as it finds a global variable for the address.
movslq %edi, %rcx
mov -0x7dc94ae0(,%rcx,8), %rcx <<<--- here
As %rcx has a valid type (i.e. array index) from the first instruction,
it will be checked by the first case in check_matching_type(). But as
it's not a pointer type, the match will fail. But in this case, it
should check if it accesses the kernel global array variable.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240502060011.1838090-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently it looks up global variables from the current CU using address
and name. But it sometimes fails to find a variable as the variable can
come from a different CU - but it's still strange it failed to find a
declaration for some reason.
Anyway, it can collect all global variables from all CU once and then
lookup them later on. This slightly improves the success rate of my
test data set.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240502060011.1838090-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This function is to search all global variables in the CU. We want to
have the list of global variables at once and match them later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240502060011.1838090-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We can't default to doing parallel tests as there are tests that compete
for the same resources and thus clash, for instance tests that put in
place 'perf probe' probes, that clean the probes without regard to other
tests needs, ARM64 coresight tests, Intel PT ones, etc.
So reintroduce --p/--parallel and make -S/--sequential the default.
We need to come up with infrastructure that state which tests can't run
in parallel because they need exclusive access to some resource,
something as simple as "probes" that would then avoid 'perf probe' tests
from running while other such test is running, or make the tests more
resilient, till then we can't use parallel mode as default.
While at it, document all these options in the 'perf test' man page.
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reported-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Ziwm18BqIn_vc1vn@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in this cset:
3c7a8e190bc58081 ("uapi: introduce uapi-friendly macros for GENMASK")
That just causes perf to rebuild. Its just some macros going to an uapi
header that we now have to grab a copy into tools/ as well.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/bits.h include/linux/bits.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/lkml/ZiwJsFOBez0MS4r9@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The loop in hists__find_annotations() never set the 'nd' pointer to NULL
and it makes stdio output repeating the last element forever. I think
it doesn't set to NULL for TUI to prevent it from exiting unexpectedly.
But it should just set on stdio mode.
Fixes: d001c7a7f4736743 ("perf annotate-data: Add hist_entry__annotate_data_tui()")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240423020643.740029-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Memory sanitizer lacks an interceptor for scandirat, reporting all
memory it allocates as uninitialized. Memory sanitizer has a scandir
interceptor so use the fallback function in this case. This allows
'perf test' to run under memory sanitizer.
Additional notes from Ian on running in this mode:
Note, as msan needs to instrument memory allocations libraries need to
be compiled with it. I lacked the msan built libraries and so built
with:
```
$ make -C tools/perf O=/tmp/perf DEBUG=1 EXTRA_CFLAGS="-O0 -g
-fno-omit-frame-pointer -fsanitize=memory
-fsanitize-memory-track-origins" CC=clang CXX=clang++ HOSTCC=clang
NO_LIBTRACEEVENT=1 NO_LIBELF=1 BUILD_BPF_SKEL=0 NO_LIBPFM=1
```
oh, I disabled libbpf here as the bpf system call also lacks msan interceptors.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240320163244.1287780-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
MemorySanitizer discovered instances where the instruction op value was
not assigned.:
WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x5581c00a76b3 in intel_pt_sample_flags tools/perf/util/intel-pt.c:1527:17
Uninitialized value was stored to memory at
#0 0x5581c005ddf8 in intel_pt_walk_insn tools/perf/util/intel-pt-decoder/intel-pt-decoder.c:1256:25
The op value is used to set branch flags for branch instructions
encountered when walking the code, so fix by setting op to
INTEL_PT_OP_OTHER in other cases.
Fixes: 4c761d805bb2d2ea ("perf intel-pt: Fix intel_pt_fup_event() assumptions about setting state type")
Reported-by: Ian Rogers <irogers@google.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Closes: https://lore.kernel.org/linux-perf-users/20240320162619.1272015-1-irogers@google.com/
Link: https://lore.kernel.org/r/20240326083223.10883-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fix comment misspellings
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240425060427.1800663-1-howardchu95@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
dso__disassemble_filename() tries to get the filename for objdump (or
capstone) using build-id. But I found sometimes it didn't disassemble
some functions.
It turned out that those functions belong to a DSO which has no binary
type set. It seems it sets the binary type for some special files only
- like kernel (kallsyms or kcore) or BPF images. And there's a logic to
skip dso with DSO_BINARY_TYPE__NOT_FOUND.
As it's checked the build-id cache link, it should set the binary type
as DSO_BINARY_TYPE__BUILD_ID_CACHE.
Fixes: 873a83731f1cc85c ("perf annotate: Skip DSOs not found")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240425005157.1104789-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
I found some cases that capstone failed to disassemble. Probably my
capstone is an old version but anyway there's a chance it can fail. And
then it silently stopped in the middle. In my case, it didn't
understand "RDPKRU" instruction.
Let's check if the capstone disassemble reached the end of the function
and fallback to objdump if not.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240425005157.1104789-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf report' TUI
As it removed the sample accounting for code when no symbol sort key is
given for 'perf report' TUI, it might not have allocated the
'struct annotated_source' yet. Let's check if it's NULL first.
Fixes: 6cdd977ec24e1538 ("perf report: Do not collect sample histogram unnecessarily")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240424230015.1054013-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a basic 'perf annotate' test:
$ ./perf test annotate -vv
76: perf annotate basic tests:
--- start ---
test child forked, pid 846989
fbcd0-fbd55 l noploop
perf does have symbol 'noploop'
Basic perf annotate test
: 0 0xfbcd0 <noploop>:
0.00 : fbcd0: pushq %rbp
0.00 : fbcd1: movq %rsp, %rbp
0.00 : fbcd4: pushq %r12
0.00 : fbcd6: pushq %rbx
0.00 : fbcd7: movl $1, %ebx
0.00 : fbcdc: subq $0x10, %rsp
0.00 : fbce0: movq %fs:0x28, %rax
0.00 : fbce9: movq %rax, -0x18(%rbp)
0.00 : fbced: xorl %eax, %eax
0.00 : fbcef: testl %edi, %edi
0.00 : fbcf1: jle 0xfbd04
0.00 : fbcf3: movq (%rsi), %rdi
0.00 : fbcf6: movl $0xa, %edx
0.00 : fbcfb: xorl %esi, %esi
0.00 : fbcfd: callq 0x41920
0.00 : fbd02: movl %eax, %ebx
0.00 : fbd04: leaq -0x7b(%rip), %r12 # fbc90 <sighandler>
0.00 : fbd0b: movl $2, %edi
0.00 : fbd10: movq %r12, %rsi
0.00 : fbd13: callq 0x40a00
0.00 : fbd18: movl $0xe, %edi
0.00 : fbd1d: movq %r12, %rsi
0.00 : fbd20: callq 0x40a00
0.00 : fbd25: movl %ebx, %edi
0.00 : fbd27: callq 0x407c0
0.10 : fbd2c: movl 0x89785e(%rip), %eax # 993590 <done>
0.00 : fbd32: testl %eax, %eax
99.90 : fbd34: je 0xfbd2c
0.00 : fbd36: movq -0x18(%rbp), %rax
0.00 : fbd3a: subq %fs:0x28, %rax
0.00 : fbd43: jne 0xfbd50
0.00 : fbd45: addq $0x10, %rsp
0.00 : fbd49: xorl %eax, %eax
0.00 : fbd4b: popq %rbx
0.00 : fbd4c: popq %r12
0.00 : fbd4e: popq %rbp
0.00 : fbd4f: retq
0.00 : fbd50: callq 0x407e0
0.00 : fbcd0: pushq %rbp
0.00 : fbcd1: movq %rsp, %rbp
0.00 : fbcd4: pushq %r12
0.00 : fbcd0: push %rbp
0.00 : fbcd1: mov %rsp,%rbp
0.00 : fbcd4: push %r12
Basic annotate test [Success]
---- end(0) ----
76: perf annotate basic tests : Ok
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240424001231.849972-1-namhyung@kernel.org
[ Improved a bit the error messages ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add comments. Pass ownership of the event name to save on a strdup.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-17-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add comments. Ensure leader->group_name is freed before overwriting
it.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-16-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Moves 352 bytes from .data to .data.rel.ro.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-15-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use a struct/bitmap rather than a copied string from lexer.
In lexer give improved error message when too many precise flags are
given or repeated modifiers.
Before:
$ perf stat -e 'cycles:kuk' true
event syntax error: 'cycles:kuk'
\___ Bad modifier
...
$ perf stat -e 'cycles:pppp' true
event syntax error: 'cycles:pppp'
\___ Bad modifier
...
$ perf stat -e '{instructions:p,cycles:pp}:pp' -a true
event syntax error: '..cycles:pp}:pp'
\___ Bad modifier
...
After:
$ perf stat -e 'cycles:kuk' true
event syntax error: 'cycles:kuk'
\___ Duplicate modifier 'k' (kernel)
...
$ perf stat -e 'cycles:pppp' true
event syntax error: 'cycles:pppp'
\___ Maximum precise value is 3
...
$ perf stat -e '{instructions:p,cycles:pp}:pp' true
event syntax error: '..cycles:pp}:pp'
\___ Maximum combined precise value is 3, adding precision to "cycles:pp"
...
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-14-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Inline parse_events_evlist_error that is only used in
parse_events_error. Modify parse_events_error to not report a parser
error unless errors haven't already been reported. Make it clearer
that the latter case only happens for unrecognized input.
Before:
$ perf stat -e 'cycles/period=99999999999999999999/' true
event syntax error: 'cycles/period=99999999999999999999/'
\___ parser error
event syntax error: '..les/period=99999999999999999999/'
\___ Bad base 10 number "99999999999999999999"
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
$ perf stat -e 'cycles:xyz' true
event syntax error: 'cycles:xyz'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
After:
$ perf stat -e 'cycles/period=99999999999999999999/xyz' true
event syntax error: '..les/period=99999999999999999999/xyz'
\___ Bad base 10 number "99999999999999999999"
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
$ perf stat -e 'cycles:xyz' true
event syntax error: 'cycles:xyz'
\___ Unrecognized input
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-13-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use the error handler from the parse_state to give a more informative
error message.
Before:
$ perf stat -e 'cycles/period=99999999999999999999/' true
event syntax error: 'cycles/period=99999999999999999999/'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
After:
$ perf stat -e 'cycles/period=99999999999999999999/' true
event syntax error: 'cycles/period=99999999999999999999/'
\___ parser error
event syntax error: '..les/period=99999999999999999999/'
\___ Bad base 10 number "99999999999999999999"
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-12-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The helper function just wraps a splice and free. Making the free
inline removes a comment, so then it just wraps a splice which we can
make inline too.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-11-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It was requested that RISC-V be able to add events to the perf tool so
the PMU driver didn't need to map legacy events to config encodings:
https://lore.kernel.org/lkml/20240217005738.3744121-1-atishp@rivosinc.com/
This change makes the priority of events specified without a PMU the
same as those specified with a PMU, namely sysfs and JSON events are
checked first before using the legacy encoding.
The hw_term is made more generic as a hardware_event that encodes a
pair of string and int value, allowing parse_events_multi_pmu_add to
fall back on a known encoding when the sysfs/JSON adding fails for
core events. As this covers PE_VALUE_SYM_HW, that token is removed and
related code simplified.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-10-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Allow the term list to be const so that other functions can pass const
term lists. Add const as necessary to called functions.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Avoid duplicate logic for name_or_raw and PE_TERM_HW by having a rule
to turn PE_TERM_HW into a name_or_raw.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Prior behavior is to not look for legacy cache names in sysfs/JSON and
to create events on all core PMUs. New behavior is to look for
sysfs/JSON events first on all PMUs, for core PMUs add a legacy event
if the sysfs/JSON event isn't present.
This is done so that there is consistency with how event names in
terms are handled and their prioritization of sysfs/JSON over
legacy. It may make sense to use a legacy cache event name as an event
name on a non-core PMU so we should allow it.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Switch from "cache-references" to "branches" in test as Intel has a
sysfs event for "cache-references" and changing the priority for sysfs
over legacy causes the test to fail.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move all implementation to pmu code. Don't allocate a fnmatch wildcard
pattern, matching ignoring the suffix already handles this, and only
use fnmatch if the given PMU name has a '*' in it.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In parse_events_add_pmu, delay copying the list of terms until it is
known the list contains terms.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Avoid passing the name of a PMU then finding it again, just directly
pass the PMU. parse_events_multi_pmu_add_or_add_pmu() is the only version
that needs to find a PMU, so move the find there. Remove the error
message as parse_events_multi_pmu_add_or_add_pmu will given an error at
the end when a name isn't either a PMU name or event name. Without the
error message being created the location in the input parameter (loc)
can be removed.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Factor out the case of an event or PMU name followed by a slash based
term list. This is with a view to sharing the code with new legacy
hardware parsing. Use early return to reduce indentation in the code.
Make parse_events_add_pmu static now it doesn't need sharing with
parse-events.y.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a Python script to run a perf script command multiple times in
parallel, using perf script options --cpu and --time so that each job
processes a different chunk of the data.
Extend perf script tests to test also the new script.
The script supports the use of normal 'perf script' options like
--dlfilter and --script, so that the benefit of running parallel jobs
naturally extends to them also. In addition, a command can be provided
(refer --pipe-to option) to pipe standard output to a custom command.
Refer to the script's own help text at the end of the patch for more
details.
The script is useful for Intel PT traces, that can be efficiently
decoded by 'perf script' when split by CPU and/or time ranges. Running
jobs in parallel can decrease the overall decoding time.
Committer testing:
Ian reported that shellcheck found some issues, I installed it as there
are no warnings about it not being available, but when available it
fails the build with:
TEST /tmp/build/perf-tools-next/tests/shell/script.sh.shellcheck_log
CC /tmp/build/perf-tools-next/util/header.o
In tests/shell/script.sh line 20:
rm -rf "${temp_dir}/"*
^-------------^ SC2115 (warning): Use "${var:?}" to ensure this never expands to /* .
In tests/shell/script.sh line 83:
output1_dir="${temp_dir}/output1"
^---------^ SC2034 (warning): output1_dir appears unused. Verify use (or export if used externally).
In tests/shell/script.sh line 84:
output2_dir="${temp_dir}/output2"
^---------^ SC2034 (warning): output2_dir appears unused. Verify use (or export if used externally).
In tests/shell/script.sh line 86:
python3 "${pp}" -o "${output_dir}" --jobs 4 --verbose -- perf script -i "${perf_data}"
^-----------^ SC2154 (warning): output_dir is referenced but not assigned (did you mean 'output1_dir'?).
For more information:
https://www.shellcheck.net/wiki/SC2034 -- output1_dir appears unused. Verif...
https://www.shellcheck.net/wiki/SC2115 -- Use "${var:?}" to ensure this nev...
https://www.shellcheck.net/wiki/SC2154 -- output_dir is referenced but not ...
Did these fixes:
- rm -rf "${temp_dir}/"*
+ rm -rf "${temp_dir:?}/"*
And:
@@ -83,8 +83,8 @@ test_parallel_perf()
output1_dir="${temp_dir}/output1"
output2_dir="${temp_dir}/output2"
perf record -o "${perf_data}" --sample-cpu uname
- python3 "${pp}" -o "${output_dir}" --jobs 4 --verbose -- perf script -i "${perf_data}"
- python3 "${pp}" -o "${output_dir}" --jobs 4 --verbose --per-cpu -- perf script -i "${perf_data}"
+ python3 "${pp}" -o "${output1_dir}" --jobs 4 --verbose -- perf script -i "${perf_data}"
+ python3 "${pp}" -o "${output2_dir}" --jobs 4 --verbose --per-cpu -- perf script -i "${perf_data}"
After that:
root@number:~# perf test -vv "perf script tests"
97: perf script tests:
--- start ---
test child forked, pid 4084139
DB test
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.032 MB /tmp/perf-test-script.T4MJDr0L6J/perf.data (7 samples) ]
<SNIP>
DB test [Success]
parallel-perf test
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.034 MB /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data (7 samples) ]
Starting: perf script --time=,91898.301878499 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --time=91898.301878500,91898.301905999 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --time=91898.301906000,91898.301933499 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --time=91898.301933500, -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --time=91898.301878500,91898.301905999 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --time=91898.301906000,91898.301933499 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
There are 4 jobs: 2 completed, 2 running
Finished: perf script --time=,91898.301878499 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --time=91898.301933500, -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
There are 4 jobs: 4 completed, 0 running
All jobs finished successfully
parallel-perf.py done
Starting: perf script --cpu=0 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=1 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=2 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=3 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=0 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=1 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=2 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=3 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
There are 28 jobs: 4 completed, 0 running
Starting: perf script --cpu=4 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=5 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=6 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=7 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=4 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=5 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=6 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=7 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
There are 28 jobs: 8 completed, 0 running
Starting: perf script --cpu=8 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=9 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=10 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=11 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=8 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=9 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=10 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=11 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
There are 28 jobs: 12 completed, 0 running
Starting: perf script --cpu=12 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=13 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=14 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=15 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=12 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=13 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=14 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=15 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
There are 28 jobs: 16 completed, 0 running
Starting: perf script --cpu=16 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=17 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=18 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=19 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=16 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=17 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=18 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=19 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
There are 28 jobs: 20 completed, 0 running
Starting: perf script --cpu=20 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=21 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=22 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=23 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=20 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=21 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=22 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=23 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
There are 28 jobs: 24 completed, 0 running
Starting: perf script --cpu=24 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=25 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=26 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=27 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=25 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=26 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=27 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
There are 28 jobs: 27 completed, 1 running
Finished: perf script --cpu=24 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
There are 28 jobs: 28 completed, 0 running
All jobs finished successfully
parallel-perf.py done
parallel-perf test [Success]
--- Cleaning up ---
---- end(0) ----
97: perf script tests : Ok
root@number:~#
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240423133248.10206-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Before:
root@x1:~# perf test 76
76: SPDX-License-Identifier: GPL-2.0 : Ok
root@x1:~#
After:
root@x1:~# perf test 76
76: Add 'perf probe's, list and remove them. : Ok
root@x1:~#
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/lkml/ZigRDKUGkcDqD-yW@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
2855c2a7820bc819 ("vhost-vdpa: change ioctl # for VDPA_GET_VRING_SIZE")
1496c47065f9f841 ("vhost-vdpa: uapi to support reporting per vq size")
To pick up these changes and support them:
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
$ cp include/uapi/linux/vhost.h tools/perf/trace/beauty/include/uapi/linux/vhost.h
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
$ diff -u before after
--- before 2024-04-22 13:39:37.185674799 -0300
+++ after 2024-04-22 13:39:52.043344784 -0300
@@ -50,5 +50,6 @@
[0x7F] = "VDPA_GET_VRING_DESC_GROUP",
[0x80] = "VDPA_GET_VQS_COUNT",
[0x81] = "VDPA_GET_GROUP_NUM",
+ [0x82] = "VDPA_GET_VRING_SIZE",
[0x8] = "NEW_WORKER",
};
$
For instance, see how those 'cmd' ioctl arguments get translated, now
VDPA_GET_VRING_SIZE will be as well:
# perf trace -a -e ioctl --max-events=10
0.000 ( 0.011 ms): pipewire/2261 ioctl(fd: 60, cmd: SNDRV_PCM_HWSYNC, arg: 0x1) = 0
21.353 ( 0.014 ms): pipewire/2261 ioctl(fd: 60, cmd: SNDRV_PCM_HWSYNC, arg: 0x1) = 0
25.766 ( 0.014 ms): gnome-shell/2196 ioctl(fd: 14, cmd: DRM_I915_IRQ_WAIT, arg: 0x7ffe4a22c740) = 0
25.845 ( 0.034 ms): gnome-shel:cs0/2212 ioctl(fd: 14, cmd: DRM_I915_IRQ_EMIT, arg: 0x7fd43915dc70) = 0
25.916 ( 0.011 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ADDFB2, arg: 0x7ffe4a22c8a0) = 0
25.941 ( 0.025 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ATOMIC, arg: 0x7ffe4a22c840) = 0
32.915 ( 0.009 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_RMFB, arg: 0x7ffe4a22cf9c) = 0
42.522 ( 0.013 ms): gnome-shell/2196 ioctl(fd: 14, cmd: DRM_I915_IRQ_WAIT, arg: 0x7ffe4a22c740) = 0
42.579 ( 0.031 ms): gnome-shel:cs0/2212 ioctl(fd: 14, cmd: DRM_I915_IRQ_EMIT, arg: 0x7fd43915dc70) = 0
42.644 ( 0.010 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ADDFB2, arg: 0x7ffe4a22c8a0) = 0
#
This addresses this perf tools build warning:
diff -u tools/perf/trace/beauty/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
But this specific process, usually boring, this time around catch a
problem, namely the addition of VDPA_GET_VRING_SIZE used an ioctl number
already taken, which went on unnoticed and only got caught when the
tools/perf/trace/beauty/vhost_virtio_ioctl.sh script was run as part of
the perf tools process of updating the tools copies of system headers it
uses for creating id->string tables that, well, broke the perf tools
build because there were multiple initializations in the strings table
for the 0x80 entry...
I'm adding here a link to the discussion, that is lacking in the fix for
the reported problem, and a quote from one of the developers involved:
"Thanks a lot for taking care of this! So given the header is actually
buggy pls hang on to this change until I merge the fix for the header
(you were CC'd on the patch). It's great we have this redundancy which
allowed us to catch the bug in time, and many thanks to Namhyung Kim for
reporting the issue!"
This is here as a hint for anyone thinking about ways to automate
checking these issues in a more automated way... ;-)
Link: https://lore.kernel.org/lkml/ 20240402172151-mutt-send-email-mst@kernel.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/lkml/ZiaW-csEZLKK48BE@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up fixes sent via perf-tools, by Namhyung Kim.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
conditional defines"
This reverts commit a672af9139a843eb7a48fd7846bb6df8f81b5f86.
By now it is not used for building tools/perf, but Stephen Rothwell
reported that when building on a O= directory that had been built with
torvalds/master and this perf build command line:
$ make -C tools/perf -f Makefile.perf -s -O -j60 O=/home/sfr/next/perf NO_BPF_SKEL=1
If we then merge perf-tools-next, as he did for linux-next, then we end
up with a build failure for libbpf:
PERF_VERSION = 6.9.rc3.g42c4635c8dee
make[3]: *** No rule to make target '/home/sfr/next/next/tools/include/uapi/linux/stat.h', needed by '/home/sfr/next/perf/libbpf/staticobjs/libbpf.o'. Stop.
make[2]: *** [Makefile:157: /home/sfr/next/perf/libbpf/staticobjs/libbpf-in.o] Error 2
make[1]: *** [Makefile.perf:892: /home/sfr/next/perf/libbpf/libbpf.a] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile.perf:264: sub-make] Error 2
This needs to be further investigated to figure out how to check if
libbpf really needs something that is in that
tools/include/uapi/linux/stat.h file and if not to remove that file in a
way that we don't break the build in any situation, to avoid requiring
doing a 'make clean'.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # PowerPC le incermental build
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20240413124340.4d48c6d8@canb.auug.org.au
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This is a common failure mode when probing userspace C++ code (where the
mangling adds significant length to the symbol names).
Prior to this patch, only a very generic error message is produced,
making the user guess at what the issue is.
Signed-off-by: Dima Kogan <dima@secretsauce.net>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240416045533.162692-3-dima@secretsauce.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In several places we had
char buf[64];
...
snprintf(buf, 64, ...);
This patch changes it to
char buf[64];
...
snprintf(buf, sizeof(buf), ...);
so the "64" is only stated once.
Signed-off-by: Dima Kogan <dima@secretsauce.net>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240416045533.162692-2-dima@secretsauce.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Hardware counter and event information could be used to help creating event
groups that better utilize hardware counters and improve multiplexing.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Weilin Wang <weilin.wang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Samantha Alt <samantha.alt@intel.com>
Link: https://lore.kernel.org/r/20240412210756.309828-2-weilin.wang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
These tests record in a mode that includes kernel trace but look for
samples of a userspace process. This makes them sensitive to any kernel
compilation options that increase the amount of time spent in the
kernel. If the trace buffer is completely filled before userspace is
reached then the test will fail. Double the buffer size to fix this.
The other tests in the same file aren't sensitive to this for various
reasons, for example the iterate devices test filters by userspace trace
only. But in order to keep coverage of all the modes, increase the
buffer size rather than filtering by userspace for the basic tests.
Fixes: d1efa4a0a696e487 ("perf cs-etm: Add separate decode paths for timeless and per-thread modes")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240326113749.257250-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When cross-compiling perf with libelf, the following error occurred:
In file included from tests/genelf.c:14:
tests/../util/genelf.h:50:2: error: #error "unsupported architecture"
50 | #error "unsupported architecture"
| ^~~~~
tests/../util/genelf.h:59:5: warning: "GEN_ELF_CLASS" is not defined, evaluates to 0 [-Wundef]
59 | #if GEN_ELF_CLASS == ELFCLASS64
Fix this by adding GEN-ELF-ARCH and GEN-ELF-CLASS definitions for rv32.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Link: https://lore.kernel.org/r/20240415095532.4930-1-cp0613@linux.alibaba.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
impacted by errata
L1D_CACHE_INVAL overcounts in certain situations. See AC03_CPU_41 and
AC04_CPU_1 for more details. Mark the event impacted by the errata.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240408214022.541839-1-ilkka@os.amperecomputing.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Refactor test to better enable sharing of logic, to give an idea of
progress and introduce test functions. Add test of measuring both
cycles and cycles:b simultaneously.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240416170014.985191-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Document that 'b' is used as a modifier to make an event use a BPF
counter.
Fixes: 01bd8efcec444468 ("perf stat: Introduce ':b' modifier")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240416170014.985191-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Test "perf probe of function from different CU" fails due to certain
configs not being enabled. Building the kernel with
CONFIG_KPROBE_EVENTS=y and CONFIG_UPROBE_EVENTS=y fixes the issue. As
CONFIG_KPROBE_EVENTS is dependent on CONFIG_KPROBES, enable it as well.
Some platforms enable these configs as a part of their defconfig, so
this change is only required for the ones that don't do so.
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240408062230.1949882-1-ChaitanyaS.Prakash@arm.com
Link: https://lore.kernel.org/r/20240408062230.1949882-7-ChaitanyaS.Prakash@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add weight1, weight2 and weight3 fields to -F/--fields and their aliases
like 'ins_lat', 'p_stage_cyc' and 'retire_lat'. Note that they are in
the sort keys too but the difference is that output fields will sum up
the weight values and display the average.
In the sort key, users can see the distribution of weight value and I
think it's confusing we have local vs. global weight for the same weight.
For example, I experiment with mem-loads events to get the weights. On
my laptop, it seems only weight1 field is supported.
$ perf mem record -- perf test -w noploop
Let's look at the noploop function only. It has 7 samples.
$ perf script -F event,ip,sym,weight | grep noploop
# event weight ip sym
cpu/mem-loads,ldlat=30/P: 43 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 48 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
cpu/mem-loads,ldlat=30/P: 59 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 33 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
When you use the 'weight' sort key, it'd show entries with a separate
weight value separately. Also note that the first entry has 3 samples
with weight value 38, so they are displayed together and the weight
value is the sum of 3 samples (114 = 38 * 3).
$ perf report -n -s +weight | grep -e Weight -e noploop
# Overhead Samples Command Shared Object Symbol Weight
0.53% 3 perf perf [.] noploop 114
0.18% 1 perf perf [.] noploop 59
0.18% 1 perf perf [.] noploop 48
0.18% 1 perf perf [.] noploop 43
0.18% 1 perf perf [.] noploop 33
If you use 'local_weight' sort key, you can see the actual weight.
$ perf report -n -s +local_weight | grep -e Weight -e noploop
# Overhead Samples Command Shared Object Symbol Local Weight
0.53% 3 perf perf [.] noploop 38
0.18% 1 perf perf [.] noploop 59
0.18% 1 perf perf [.] noploop 48
0.18% 1 perf perf [.] noploop 43
0.18% 1 perf perf [.] noploop 33
But when you use the -F/--field option instead, you can see the average
weight for the while noploop function (as it won't group samples by
weight value and use the default 'comm,dso,sym' sort keys).
$ perf report -n -F +weight | grep -e Weight -e noploop
Warning:
--fields weight shows the average value unlike in the --sort key.
# Overhead Samples Weight1 Command Shared Object Symbol
1.23% 7 42.4 perf perf [.] noploop
The weight1 field shows the average value:
(38 * 3 + 59 + 48 + 43 + 33) / 7 = 42.4
Also it'd show the warning that 'weight' field has the average value.
Using 'weight1' can remove the warning.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240411181718.2367948-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Like period and sample numbers, it'd be better to track weight values
and display them in the output rather than having them as sort keys.
This patch just adds a few more fields to save the weights in a hist
entry. It'll be displayed as new output fields in the later patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240411181718.2367948-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It's strange that sort.h has the definition of struct hist_entry. As
sort.h already includes hist.h, let's move the data structure to hist.h.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240411181718.2367948-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In some cases, the stack pointer on x86 (rsp = reg7) is used to point
variables on stack but it's not the frame base register. Then it
should handle the register like normal registers (IOW not to access
the other stack variables using offset calculation) but it should not
assume it would have a pointer.
Before:
-----------------------------------------------------------
find data type for 0x7c(reg7) at tcp_getsockopt+0xb62
CU for net/ipv4/tcp.c (die:0x7b5f516)
frame base: cfa=0 fbreg=6
no pointer or no type
check variable "zc" failed (die: 0x7b9580a)
variable location: base=reg7, offset=0x40
type='struct tcp_zerocopy_receive' size=0x40 (die:0x7b947f4)
After:
-----------------------------------------------------------
find data type for 0x7c(reg7) at tcp_getsockopt+0xb62
CU for net/ipv4/tcp.c (die:0x7b5f516)
frame base: cfa=0 fbreg=6
found "zc" in scope=3/3 (die: 0x7b957fc) type_offset=0x3c
variable location: base=reg7, offset=0x40
type='struct tcp_zerocopy_receive' size=0x40 (die:0x7b947f4)
Note that the type-offset was properly calculated to 0x3c as the
variable starts at 0x40.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240412183310.2518474-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
