| Age | Commit message (Collapse) | Author |
|---|
|
test_adding_kernel
perftool-testsuite_probe fails in test_adding_kernel as below:
Regexp not found: "probe:inode_permission_11"
-- [ FAIL ] -- perf_probe :: test_adding_kernel :: force-adding probes ::
second probe adding (with force) (output regexp parsing)
event syntax error: 'probe:inode_permission_11'
\___ unknown tracepoint
Error: File /sys/kernel/tracing//events/probe/inode_permission_11
not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to
enable this feature?.
The test does the following:
1) Adds a probe point first using:
$CMD_PERF probe --add $TEST_PROBE
2) Then tries to add same probe again without —force and expects it to
fail. Next tries to add same probe again with —force. In this case,
perf probe succeeds and adds the probe with a suffix number. Example:
./perf probe --add inode_permission
Added new event:
probe:inode_permission (on inode_permission)
./perf probe --add inode_permission --force
Added new event:
probe:inode_permission_1 (on inode_permission)
./perf probe --add inode_permission --force
Added new event:
probe:inode_permission_2 (on inode_permission)
Each time, suffix is added to existing probe name.
To get the suffix number, test cases uses:
NO_OF_PROBES=`$CMD_PERF probe -l | wc -l`
This will work if there is no other probe existing in the system. If
there are any other probes other than kernel probes or inode_permission,
( example: any probe), "perf probe -l" will include count for other
probes too.
Example, in the system where this failed, already some probes were
default added. So count became 10
./perf probe -l | wc -l
10
So to be specific for "inode_permission", restrict the probe count check
to that probe point alone using:
NO_OF_PROBES=`$CMD_PERF probe -l $TEST_PROBE| wc -l`
Similarly while removing the probe using "probe --del *", (removing all
probes), check uses:
../common/check_all_lines_matched.pl "Removed event: probe:$TEST_PROBE"
But if there are other probes in the system, the log will contain
reference to other existing probe too. Hence change usage of
check_all_lines_matched.pl to check_all_patterns_found.pl This will make
sure expecting string comes in the result
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250110094324.94604-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The standalone tarballs should include the license files - both the
COPYING declaration as well as the text of GPLv2.
Signed-off-by: Michel Lind <michel@michel-slm.name>
Link: https://lore.kernel.org/r/Z0Zcx0WRqtlUYpgw@hyperscale.parallels
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The brstack test runs quite slowly in software models. Part of the reason
is "xargs -n1" is quite inefficient in replacing spaces with newlines.
While that's not noticeable on normal machines, it is on software models.
Use "tr -s ' ' '\n'" instead which can do the same transformation, but is
much faster. For comparison on an M1 Macbook Pro:
$ time seq -s ' ' 10000 | xargs -n1 > /dev/null
real 0m2.729s
user 0m2.009s
sys 0m0.914s
$ time seq -s ' ' 10000 | tr -s ' ' '\n' | grep '.' > /dev/null
real 0m0.002s
user 0m0.001s
sys 0m0.001s
The "grep '.'" is also needed to remove any remaining blank lines.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241213231312.2640687-2-robh@kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
[robh: Drop changing loop iterations on arm64. Squash blank line fix and redo commit msg]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The mips syscall generation was still based on the old method. Delete
the Makefile since it is no longer needed with the new method of
generation.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes: 619ffe669496a288 ("perf tools mips: Use generic syscall scripts")
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250110-perf_fix_mips-v1-1-4e661c3b710a@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a test that checks that there were no AUX or AUXTRACE events
recorded when discard mode is used.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108142904.401139-6-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The buffer will never be written to so don't bother allocating it. The
tracking event is also not required.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108142904.401139-5-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
These won't be used in the next commit in discard mode, so put them in
their own functions. No functional changes intended.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108142904.401139-4-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The wrong help message may mislead users. This commit fixes it.
Fixes: 328ccdace8855289 ("perf report: Add --no-demangle option")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiachen Zhang <me@jcix.top>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250109152220.1869581-1-me@jcix.top
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When min_latency is not given, it prints 0 - 0. It should be 0 - 1.
Before:
$ sudo ./perf ftrace latency -a -T do_futex sleep 1
# DURATION | COUNT | GRAPH |
0 - 0 us | 321 | ########### |
...
After:
$ sudo ./perf ftrace latency -a -T do_futex sleep 1
# DURATION | COUNT | GRAPH |
0 - 1 us | 699 | ############ |
...
Fixes: 08b875b6bf608589 ("perf ftrace latency: Introduce --min-latency to narrow down into a latency range")
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Gabriele Monaco <gmonaco@redhat.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250108210015.1188531-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It's an optional feature and remains 0 when bucket range is not given.
And it makes the histogram goes to the last entry always because any
latency (num) is greater than or equal to 0.
Before:
$ sudo ./perf ftrace latency -a -T do_futex sleep 1
# DURATION | COUNT | GRAPH |
0 - 0 us | 0 | |
1 - 2 us | 0 | |
2 - 4 us | 0 | |
4 - 8 us | 0 | |
8 - 16 us | 0 | |
16 - 32 us | 0 | |
32 - 64 us | 0 | |
64 - 128 us | 0 | |
128 - 256 us | 0 | |
256 - 512 us | 0 | |
512 - 1024 us | 0 | |
1 - 2 ms | 0 | |
2 - 4 ms | 0 | |
4 - 8 ms | 0 | |
8 - 16 ms | 0 | |
16 - 32 ms | 0 | |
32 - 64 ms | 0 | |
64 - 128 ms | 0 | |
128 - 256 ms | 0 | |
256 - 512 ms | 0 | |
512 - 1024 ms | 0 | |
1 - ... s | 1353 | ############################################## |
After:
$ sudo ./perf ftrace latency -a -T do_futex sleep 1
# DURATION | COUNT | GRAPH |
0 - 0 us | 321 | ########### |
1 - 2 us | 132 | #### |
2 - 4 us | 202 | ####### |
4 - 8 us | 188 | ###### |
8 - 16 us | 16 | |
16 - 32 us | 12 | |
32 - 64 us | 30 | # |
64 - 128 us | 98 | ### |
128 - 256 us | 53 | # |
256 - 512 us | 57 | ## |
512 - 1024 us | 9 | |
1 - 2 ms | 9 | |
2 - 4 ms | 1 | |
4 - 8 ms | 98 | ### |
8 - 16 ms | 5 | |
16 - 32 ms | 7 | |
32 - 64 ms | 32 | # |
64 - 128 ms | 10 | |
128 - 256 ms | 10 | |
256 - 512 ms | 2 | |
512 - 1024 ms | 0 | |
1 - ... s | 0 | |
Fixes: 690a052a6d85c530 ("perf ftrace latency: Add --max-latency option")
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Gabriele Monaco <gmonaco@redhat.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250108210015.1188531-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Document the flag along with PMU events to hint what it's used for and
give an example with other useful options to get minimal output.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250108142904.401139-3-james.clark@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Needed to build tools/lib/bpf/ on various arches other than x86_64,
notably arm64 when using the perf tarballs generated by:
$ make help | grep perf-
perf-tar-src-pkg - Build the perf source tarball with no compression
perf-targz-src-pkg - Build the perf source tarball with gzip compression
perf-tarbz2-src-pkg - Build the perf source tarball with bz2 compression
perf-tarxz-src-pkg - Build the perf source tarball with xz compression
perf-tarzst-src-pkg - Build the perf source tarball with zst compression
$
Building with BPF support was opt-in in perf for a long time, and
testing it via the tarball main kernel Makefile targets in an
architecture other than x86_64 was an odd case.
I had noticed this at some point earlier this year while cross building
perf to some arches, including arm64, but it fell thru the cracks, see
the Link tag below.
Fix it now by adding those arch/*/include/uapi/asm/bpf_perf_event.h
files to the MANIFEST file used in building the perf source tarball.
Tested with:
perfbuilder@number:~$ time dm debian:experimental-x-arm64
1 21.60 debian:experimental-x-arm64 : Ok aarch64-linux-gnu-gcc (Debian 14.1.0-5) 14.1.0 flex 2.6.4
BUILD_TARBALL_HEAD=d31a974f6edc576f84c35be9526fec549a3b3520
$
$ git log --oneline -1 d31a974f6edc576f84c35be9526fec549a3b3520
d31a974f6edc576f (HEAD -> perf-tools-next) perf MANIFEST: Add arch/*/include/uapi/asm/bpf_perf_event.h to the perf tarball
$
That was previously failing:
perfbuilder@number:~$ grep debian:experimental-x-arm64 dm.log.old/summary
19 4.80 debian:experimental-x-arm64 : FAIL gcc version 14.1.0 (Debian 14.1.0-5)
$
perfbuilder@number:~$ grep -B6 'Error 1' dm.log.old/debian:experimental-x-arm64
In file included from /git/perf-6.12.0-rc6/tools/include/uapi/linux/bpf_perf_event.h:11,
from libbpf.c:36:
/git/perf-6.12.0-rc6/tools/include/uapi/asm/bpf_perf_event.h:2:10: fatal error: ../../arch/arm64/include/uapi/asm/bpf_perf_event.h: No such file or directory
2 | #include "../../arch/arm64/include/uapi/asm/bpf_perf_event.h"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[4]: *** [/git/perf-6.12.0-rc6/tools/build/Makefile.build:105: /tmp/build/perf/libbpf/staticobjs/libbpf.o] Error 1
perfbuilder@number:~$
Closes: https://lore.kernel.org/all/Z0UNRCRYKunbDYxP@hyperscale.parallels
Fixes: 9eea8fafe33eb708 ("libbpf: fix __arg_ctx type enforcement for perf_event programs")
Reported-by: Michel Lind <michel@michel-slm.name>
Tested-by: Michel Lind <michel@michel-slm.name>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: 317c11923cf676437456e44a7f408d4ce589a9c0.camel@michel-slm.name
Link: https://lore.kernel.org/bpf/ZfyEgoG3JFiOs2Fs@x1/
Link: https://lore.kernel.org/r/Z0Yy5u42Q1hWoEzz@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add PMU events for FUJITSU-MONAKA.
And, also updated common-and-microarch.json and recommended.json.
FUJITSU-MONAKA Specification URL:
https://github.com/fujitsu/FUJITSU-MONAKA
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Akio Kakuno <fj3333bs@aa.jp.fujitsu.com>
Signed-off-by: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Xu Yang <xu.yang_2@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20241217065751.1448755-1-fj5100bi@fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In machine__create_module(), it reads /proc/modules to get a list of
modules in the system. The file shows the start address (of text) and
the size of the module so it uses the info to reconstruct system memory
maps for symbol resolution.
But module memory consists of multiple segments and they can be
scaterred. Currently perf tools assume they are contiguous and see some
overlaps. This can confuse the tool when it finds a map containing a
given address.
As we mostly care about the function symbols in the text segment, it can
fixup the size or end address of modules when there's an overlap. We
can use maps__fixup_end() which updates the end address using the start
address of the next map.
Ideally it should be able to track other segments (like data/rodata),
but that would require some changes in /proc/modules IMHO.
Reported-by: Blake Jones <blakejones@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20241218220453.203069-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When there are more than one symbols at the same address, it needs to
choose which one is better. In choose_best_symbol() it didn't check the
type of symbols. It's possible to have labels in other symbols and in
that case, it would be better to pick the actual symbol over the labels.
To minimize the possible impact on other symbols, I only check NOTYPE
symbols specifically.
$ readelf -sW vmlinux | grep -e __do_softirq -e __softirqentry_text_start
105089: ffffffff82000000 814 FUNC GLOBAL DEFAULT 1 __do_softirq
111954: ffffffff82000000 0 NOTYPE GLOBAL DEFAULT 1 __softirqentry_text_start
The commit 77b004f4c5c3c90b tried to do the same by not giving the size
to the label symbols but it seems there's some label-only symbols in asm
code. Let's restore the original code and choose the right symbol using
type of the symbols.
Fixes: 77b004f4c5c3c90b ("perf symbol: Do not fixup end address of labels")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: http://lore.kernel.org/lkml/Z3b-DqBMnNb4ucEm@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
cxx_demangle_sym is weak in case demangle-cxx.c replaces the
definition in symbol-elf.c. When demangle-cxx.c is built
HAVE_CXA_DEMANGLE_SUPPORT is defined, as such the define can be used
to avoid a weak symbol.
As weak symbols are outside of the C standard their use can lead to
strange behaviors, in particular with LTO, as well as causing issues to
be hidden at link time.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241119031754.1021858-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some version of compilers reported unaligned accesses in perf trace when
undefined-behavior sanitizer is on. I found that it uses raw data in
the sample directly and assuming it's properly aligned.
Unlike other sample fields, the raw data is not 8-byte aligned because
there's a size field (u32) before the actual data. So I added a static
buffer in syscall__augmented_args() and return it instead. This is not
ideal but should work well as perf trace is single-threaded.
A better approach would be aligning the raw data by adding a 4-byte data
before the augmented args but I'm afraid it'd break the backward
compatibility.
Committer testing:
To build with the undefined behaviour sanitizer:
$ make CC=clang EXTRA_CFLAGS=-fsanitize=undefined -C tools/perf
Checking if the resulting binary is instrumented:
root@number:~# nm ~/bin/perf | grep ubsan | wc -l
113
root@number:~# nm ~/bin/perf | grep ubsan | tail -5
000000000043d5b0 t _ZN7__ubsanL19UBsanOnDeadlySignalEiPvS0_
000000000043ce50 T _ZNK7__ubsan5Value12getSIntValueEv
000000000043cf40 T _ZNK7__ubsan5Value12getUIntValueEv
000000000043d140 T _ZNK7__ubsan5Value13getFloatValueEv
000000000043cfd0 T _ZNK7__ubsan5Value19getPositiveIntValueEv
root@number:~#
Now running something that will access timespec, as reported in the
Closes URL:
root@number:~# perf trace --max-events=1 -e *nano* sleep 1.1
trace/beauty/timespec.c:10:64: runtime error: member access within misaligned address 0x7fc583cfb2a4 for type 'struct augmented_arg', which requires 8 byte alignment
0x7fc583cfb2a4: note: pointer points here
99 99 11 00 10 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 01 e1 f5 05 00 00 00 00 00 00 00 00
^
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior trace/beauty/timespec.c:10:64
<SNIP>
As Namhyung said we need to make the raw_data to be 64-bit aligned,
probably we need to add a PERF_SAMPLE_ALIGNED_RAW with a 64-bit raw_size
instead of the current u32 done at kernel/events/core.c,
perf_output_sample(), that perf_output_put(handle, raw->size) where
raw->size is an u32 and then the raw_data is always 64-bit unaligned...
After the patch:
root@number:~# perf trace -e *nano* sleep 1.1
0.000 (1100.064 ms): sleep/1984224 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 100000001 }, rmtp: 0x7fff5b3fe970) = 0
root@number:~#
Closes: https://lore.kernel.org/r/Z2STgyD1p456Qqhg@google.com
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250102201248.790841-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Probes are global and other probe tests are already exclusive. These
two tests can throw warnings when run at the same time so mark them as
exclusive too:
$ perf test -vvv 81 79
79: perftool-testsuite_probe:
--- start ---
test child forked, pid 46419
../common/init.sh: line 137: /sys/kernel/debug/tracing/uprobe_events: Device or resource busy
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20250107165933.292225-1-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
All architectures now support HAVE_SYSCALL_TABLE_SUPPORT, so the flag is
no longer needed. With the removal of the flag, the related
GENERIC_SYSCALL_TABLE can also be removed.
libaudit was only used as a fallback for when HAVE_SYSCALL_TABLE_SUPPORT
was not defined, so libaudit is also no longer needed for any
architecture.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-16-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use the generic scripts to generate headers from the syscall table
instead of the custom ones for s390.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-15-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use the generic scripts to generate headers from the syscall table
instead of the custom ones for powerpc.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-14-7543b5293098@rivosinc.com
Link: https://lore.kernel.org/lkml/20250110100505.78d81450@canb.auug.org.au
[ Stephen Rothwell noticed on linux-next that the powerpc build for perf was broken and ...]
Link: https://lore.kernel.org/lkml/20250109-perf_powerpc_spu-v1-1-c097fc43737e@rivosinc.com
[ ... Charlie fixed it up and asked for it to be squashed to avoid breaking bisection. ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use the generic scripts to generate headers from the syscall table for
mips.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-13-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
loongarch uses a syscall table, use that in perf instead of using unistd.h.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-12-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
arm64 uses a syscall table, use that in perf instead of using unistd.h.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-11-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
parisc uses a syscall table, use that in perf instead of requiring
libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-10-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
alpha uses a syscall table, use that in perf instead of requiring
libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-9-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use the generic scripts to generate headers from the syscall table for
both 32- and 64-bit x86.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-8-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
xtensa uses a syscall table, use that in perf instead of requiring
libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-7-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
sparc uses a syscall table, use that in perf instead of requiring
libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-6-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
sh uses a syscall table, use that in perf instead of requiring libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-5-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
arm uses a syscall table, use that in perf instead of requiring
libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-4-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
csky uses the generic syscall table, use that in perf instead of
requiring libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Guo Ren <guoren@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-3-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Arc uses the generic syscall table, use that in perf instead of
requiring libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-2-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently each architecture in perf independently generates syscall
headers.
Adapt the work that has gone into unifying syscall header
implementations in the kernel to work with perf tools.
Introduce this framework with riscv at first. riscv previously relied on
libaudit, but with this change, perf tools for riscv no longer needs
this external dependency.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-1-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Previously cpu maps in the test weren't modified by calls to the cpu map
API, however, perf_cpu_map__merge was modified so the left hand argument
was updated.
In the test this meant the maps copy of the "two" map was put/deleted in
the merge meaning when accessed via maps, the pointer was stale and to
the put/deleted memory.
To fix this add an extra layer of indirection to the maps array, so the
updated value of two is accessed.
Fixes: a9d2217556f7745e ("libperf cpumap: Refactor perf_cpu_map__merge()")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250108051511.1720369-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Remove unused symbol_conf.h include.
First, it's just unused. Second, it's problematic since this is a C++
file, and most perf headers don't compile as C++. So if any other
includes are added to symbol_conf.h, it may break the build.
Signed-off-by: Dmitriy Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250108070248.237943-1-dvyukov@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Shellcheck versions < v0.7.2 can't follow this path so add the helper to
fix the following warning:
tests/shell/trace_btf_general.sh line 8:
. "$(dirname $0)"/lib/probe.sh
^--------------------------^ SC1090: Can't follow non-constant source.
Use a directive to specify location.
Fixes: 0255338d69754a02 ("perf trace: Add tests for BTF general augmentation")
Signed-off-by: James Clark <james.clark@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250106164300.734202-1-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When adding support for refconunt checking a cut'n'paste made this
function, that is just an accessor to a bool member of 'struct nsinfo',
return a pid_t, when that member is a boolean, fix it.
Fixes: bcaf0a97858de7ab ("perf namespaces: Add functions to access nsinfo")
Reported-by: Francesco Nigro <fnigro@redhat.com>
Reported-by: Ilan Green <igreen@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yonatan Goldschmidt <yonatan.goldschmidt@granulate.io>
Link: https://lore.kernel.org/r/20241206204828.507527-6-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
not in the same pidns
When running 'perf record' outside a container and the java agent inside
a container the jit_repipe_code_load() and friends will emit
PERF_RECORD_MMAP2 entries for the jitdump records and will check if we
need to fixup the pid/tid:
nspid = jr->load.pid;
pid = jr_entry_pid(jd, jr);
tid = jr_entry_tid(jd, jr);
The jr_entry_pid() function looks if we're in the same pidns:
static pid_t jr_entry_pid(struct jit_buf_desc *jd, union jr_entry *jr)
{
if (jd->nsi && nsinfo__in_pidns(jd->nsi))
return nsinfo__tgid(jd->nsi);
return jr->load.pid;
}
But since the thread, populated from perf.data records, try to figure
out if in the same pidns by actually trying, on the system where 'perf
inject' is running to open a procfs file (a bug that remains to be
fixed), assuming that if it is not possible that is because that thread
terminated and thus we can't get its namespace info and tolerates
nsinfo__init() failing, noting only that that namespace can't be
entered, so don't even try.
But we can kinda get at least that info (thread->nsinfo->in_pidns) from
the data in the perf.data file, namely the pid and tid in the
PERF_RECORD_MMAP2 for the jit-<PID>.dump file generated from the java
agent, if the PERF_RECORD_MMAP2->pid is the same as what is in the
jitdump file, then we're in the same namespace, otherwise we need to use
the PERF_RECORD_MMAP2->pid.
This all has to be revamped for this jitdump + running perf from
outside, as the meaning of in_pidns is being abused, the initialization
of nsinfo->pid with the value coming from the PERF_RECORD_MMAP2 data is
wrong as it is the pid _outside_ the container since perf was running
there.
The hack in this patch at least produces the expected result in this
scenario by following the assumptions in the current codebase for
finding maps and for generating the PERF_RECORD_MMAP2 for the ELF files
synthesized from the jitdump records in jit_repipe_code_load(), etc.s
Reported-by: Francesco Nigro <fnigro@redhat.com>
Reported-by: Ilan Green <igreen@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yonatan Goldschmidt <yonatan.goldschmidt@granulate.io>
Link: https://lore.kernel.org/r/20241206204828.507527-5-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When we're processing a perf.data file we will, for every thread in that
file do a machine__findnew_thread(machine, pid, tid) that when that pid
is seen for the first time will create a 'struct thread' representing
it.
That in turn will call nsinfo__new() -> nsinfo__init() and there it will
assume we're running live, which is wrong and will need to be addressed
in a followup patch.
The nsinfo__new() assumes that if we can't access that thread it has
already finished and will ignore the -1 return from nsinfo__init(), just
taking notes to avoid trying to enter in that namespace, since it isn't
there anymore, a race.
When doing this from 'perf inject', tho, we can fill in parts of that
nsinfo from what we get from the PERF_RECORD_MMAP2 (pid, tid) and in the
jitdump file name, that has the form of jit-<PID>.dump.
So if the pid in the jitdump file name is not the one in the
PERF_RECORD_MMAP2, we can assume that its the pid of the process
_inside_ the namespace, and that perf was runing outside that namespace.
This will be done in the following patch.
Reported-by: Francesco Nigro <fnigro@redhat.com>
Reported-by: Ilan Green <igreen@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yonatan Goldschmidt <yonatan.goldschmidt@granulate.io>
Link: https://lore.kernel.org/r/20241206204828.507527-4-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When the java agent is running inside a container it will emit mmaps
with the format:
⬢ [acme@toolbox a]$ perf report -D | grep PERF_RECORD_MMAP | grep \.dump
0 0x15c400 [0x90]: PERF_RECORD_MMAP2 3308868/3308868: [0x7fb8de6cb000(0x1000) @ 0 08:14 3222905945 0]: r-xp /tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jit-1.dump
⬢ [acme@toolbox a]$
Since perf is running from outside the container it sees the pid 3308868
in PERF_RECORD_MMAP2, while the agent saw the pid of the profiled app
inside the container, 1.
The previous validation was:
if (pid && pid2 != nsinfo__nstgid(nsi))
pid2 at this point is '1' (/jit-1.dump), so it considers this as a
malformed jitdump mmap and refuses to process it.
The test ends up as:
if (3308868 && 1 != 3308868)
which is true and the jitdump is not processed.
Since 1 in the container namespace is really 3308868 in the namespace
that perf is running, consider this a valid mmap.
We need to make perf realize this and behave accordingly, for now
checking instead:
if (pid && pid2 && pid != nsinfo__nstgid(nsi))
Translating to:
if (3308868 && 1 && 3308868 != 3308868)
Will make the jitdump mmap to be considered valid and processed.
The jitdump is described in:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/perf/Documentation/jitdump-specification.txt
Now we end up with the expected flurry of MMAPs, one per jitted function
transformed into a little ELF file that should then be processable by
the other perf features, like code annotation:
[acme@toolbox a]$ echo $JITDUMPDIR
/tmp/.debug/jit
[acme@toolbox a]$
First use 'perf inject':
⬢ [acme@toolbox a]$ time perf inject -i perf.data -o acme-perf-injected.data -j
Then look at the PERF_RECORD_MMAP events in the result file, that went
thru the JIT map file:
⬢ [acme@toolbox a]$ ls -la /tmp/*.map
-rw-r--r--. 1 acme acme 2989559 Nov 27 16:11 /tmp/perf-3308868.map
[acme@toolbox a]$
It is a symbol table:
⬢ [acme@toolbox a]$ head /tmp/*.map
0x00007fb8bda5c1a0 0x00000000000000d0 java.lang.String java.lang.module.ModuleDescriptor.name()
0x00007fb8bda5c4a0 0x0000000000000178 int java.lang.StringLatin1.hashCode(byte[])
0x00007fb8bda5c9a0 0x00000000000000d0 java.lang.String org.springframework.boot.context.config.ConfigDataLocation.getValue()
0x00007fb8bda5cca0 0x00000000000000d0 java.lang.module.ModuleDescriptor java.lang.module.ModuleReference.descriptor()
0x00007fb8bda5cfa0 0x00000000000000d0 java.lang.Object java.util.KeyValueHolder.getKey()
0x00007fb8bda5d2a0 0x00000000000000d0 java.lang.Object java.util.KeyValueHolder.getValue()
0x00007fb8bda5d5a0 0x0000000000000218 boolean jdk.internal.misc.Unsafe.compareAndSetReference(java.lang.Object, long, java.lang.Object, java.lang.Object)
0x00007fb8bda5d9a0 0x00000000000001f0 boolean jdk.internal.misc.Unsafe.compareAndSetLong(java.lang.Object, long, long, long)
0x00007fb8bda5dda0 0x00000000000001f8 void java.lang.System.arraycopy(java.lang.Object, int, java.lang.Object, int, int)
0x00007fb8bda5e1a0 0x00000000000001e8 int java.lang.Object.hashCode()
⬢ [acme@toolbox a]$
As specified in:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/perf/Documentation/jit-interface.txt
This was collected from inside the container, so came as
/tmp/perf-1.map.
To make perf, running outside the container to use it we need to copy it
to /tmp/perf-3308868.map.
This is another logic that has to be added to perf to work on this
scenario of running outside the container but processing things created
by the hava agent running inside the container.
With all this in place we get to:
⬢ [acme@toolbox a]$ perf report -D -i acme-perf-injected.data | \
grep PERF_RECORD_MMAP > /tmp/acme-perf-injected.data.mmaps ; \
wc -l /tmp/acme-perf-injected.data.mmaps
44182 /tmp/acme-perf-injected.data.mmaps
⬢ [acme@toolbox a]$ tail /tmp/acme-perf-injected.data.mmaps
1030266786574466 0x7bc9e0 [0x98]: PERF_RECORD_MMAP2 1/78: [0x7fb8c0ceb1c0(0x8d0) @ 0x80 00:2c 238715 1]: --xs /tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jitted-1-43989.so
1030266795288774 0x7bca78 [0x98]: PERF_RECORD_MMAP2 1/78: [0x7fb8c0cecc00(0x7e8) @ 0x80 00:2c 238716 1]: --xs /tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jitted-1-43990.so
1030266895967339 0x7bcb10 [0x98]: PERF_RECORD_MMAP2 1/78: [0x7fb8c0cee500(0x3328) @ 0x80 00:2c 238717 1]: --xs /tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jitted-1-43991.so
1030266915748306 0x7bcba8 [0x98]: PERF_RECORD_MMAP2 1/78: [0x7fb8c0aae0a0(0x138) @ 0x80 00:2c 238718 1]: --xs /tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jitted-1-43992.so
1030267185851220 0x7bcc40 [0x98]: PERF_RECORD_MMAP2 1/78: [0x7fb8c0cf61e0(0x3b50) @ 0x80 00:2c 238719 1]: --xs /tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jitted-1-43993.so
1030267231364524 0x7bccd8 [0x98]: PERF_RECORD_MMAP2 1/78: [0x7fb8c0cfea80(0x14a0) @ 0x80 00:2c 238720 1]: --xs /tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jitted-1-43994.so
1030267425498831 0x7bcd70 [0x98]: PERF_RECORD_MMAP2 1/78: [0x7fb8c054b4a0(0x338) @ 0x80 00:2c 238721 1]: --xs /tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jitted-1-43995.so
1030267506147888 0x7bce08 [0x98]: PERF_RECORD_MMAP2 1/78: [0x7fb8c0a995c0(0x1e8) @ 0x80 00:2c 238722 1]: --xs /tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jitted-1-43996.so
1030268112586116 0x7bcea0 [0x98]: PERF_RECORD_MMAP2 1/78: [0x7fb8c0d02520(0x258) @ 0x80 00:2c 238723 1]: --xs /tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jitted-1-43997.so
1030269435398150 0x7bcf38 [0x98]: PERF_RECORD_MMAP2 1/78: [0x7fb8c0d02dc0(0x278) @ 0x80 00:2c 238724 1]: --xs /tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jitted-1-43998.so
⬢ [acme@toolbox a]$
And if we look at those tiny ELF files generated by the jitdump code
used by 'perf inject' we see:
⬢ [acme@toolbox a]$ file /tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jitted-1-43989.so
/tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jitted-1-43989.so: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=790591db95a77d644657dfe5058658b200000000, with debug_info, not stripped
⬢ [acme@toolbox a]$ file /tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jitted-1-43990.so
/tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jitted-1-43990.so: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=762f932acbee53a22638bf4c2b86780200000000, with debug_info, not stripped
⬢ [acme@toolbox a]$
⬢ [acme@toolbox a]$ ls -la /tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jitted-1-43989.so /tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jitted-1-43990.so
-rw-r--r--. 1 acme acme 9432 Nov 29 10:56 /tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jitted-1-43989.so
-rw-r--r--. 1 acme acme 7504 Nov 29 10:56 /tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jitted-1-43990.so
⬢ [acme@toolbox a]$
And:
⬢ [acme@toolbox a]$ objdump -dS /tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jitted-1-43990.so | head -20
/tmp/.debug/jit/java-jit-20241126.XXTxEIOn/jitted-1-43990.so: file format elf64-x86-64
Disassembly of section .text:
0000000000000080 <Lredacted/REDACTED/REDACTED/logging/RedactedRedacted;Redacted(Lredacted/REDACTED/REDACTED/redactedRedacted/Redacted;)V>:
80: 44 8b 56 08 mov 0x8(%rsi),%r10d
84: 49 c1 e2 03 shl $0x3,%r10
88: 49 3b c2 cmp %r10,%rax
8b: 0f 85 6f 15 83 fc jne fffffffffc831600 <Lredacted/REDACTED/REDACTED/redacted/RedactedRedactedRedacted;Redacted(Lredacted/Redacted/Redacted/redactedRedacted/Redacted;)V+0xfffffffffc831580>
91: 66 66 90 data16 xchg %ax,%ax
94: 0f 1f 84 00 00 00 00 nopl 0x0(%rax,%rax,1)
9b: 00
9c: 66 66 66 90 data16 data16 xchg %ax,%ax
a0: 89 84 24 00 c0 fe ff mov %eax,-0x14000(%rsp)
a7: 55 push %rbp
a8: 48 8b ec mov %rsp,%rbp
ab: 48 83 ec 40 sub $0x40,%rsp
af: 48 89 34 24 mov %rsi,(%rsp)
⬢ [acme@toolbox a]$
The thing now being investigated is why we can't annotate anything here,
maybe that JITDUMPDIR is getting in the way:
⬢ [acme@toolbox a]$ perf annotate --stdio2 -i acme-perf-injected.data 'java.lang.String com.fasterxml.jackson.core.sym.CharsToNameCanonicalizer.findSymbol(char[], int, int, int)'
Error:
Couldn't annotate java.lang.String com.fasterxml.jackson.core.sym.CharsToNameCanonicalizer.findSymbol(char[], int, int, int):
Internal error: Invalid -1 error code
⬢ [acme@toolbox a]$
In the tests I performed while merging this patch:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d518ac7be6223811ab947897273b1bbef846180
It works, but then there was no JITDUMPDIR involved:
/home/acme/.debug/jit/java-jit-20241127.XXF1SRgN/jitted-3912413-4191.so
⬢ [acme@toolbox perf-tools-next]$ perf report --call-graph none --no-child -i perf-injected.data | grep jitted- | head
1.36% java jitted-3912413-54.so [.] Interpreter
0.30% C1 CompilerThre jitted-3912413-1.so [.] flush_icache_stub
0.18% java jitted-3912413-4184.so [.] org.apache.fop.fo.properties.PropertyMaker.get(int, org.apache.fop.fo.PropertyList, boolean, boolean)
0.18% java jitted-3912413-4177.so [.] org.apache.fop.layoutmgr.inline.TextLayoutManager.getNextKnuthElements(org.apache.fop.layoutmgr.LayoutContext, int)
0.13% java jitted-3912413-3845.so [.] java.text.DecimalFormat.subformatNumber(java.lang.StringBuffer, java.text.Format$FieldDelegate, boolean, boolean, int, int, int, int)
0.11% java jitted-3912413-4191.so [.] org.apache.fop.fo.FObj.addChildNode(org.apache.fop.fo.FONode)
0.09% java jitted-3912413-2418.so [.] org.apache.fop.fo.XMLWhiteSpaceHandler.handleWhiteSpace()
0.08% Reference Handl jitted-3912413-54.so [.] Interpreter
0.08% java jitted-3912413-3326.so [.] org.apache.xmlgraphics.fonts.Glyphs.stringToGlyph(java.lang.String)
0.08% java jitted-3912413-3953.so [.] org.apache.fop.layoutmgr.BreakingAlgorithm.considerLegalBreak(org.apache.fop.layoutmgr.KnuthElement, int)
⬢ [acme@toolbox perf-tools-next]$
And then:
⬢ [acme@toolbox perf-tools-next]$ perf annotate --stdio2 -i perf-injected.data 'org.apache.fop.layoutmgr.inline.TextLayoutManager.getNextKnuthElements(org.apache.fop.layoutmgr.LayoutContext, int)' | head -20
Samples: 8 of event 'cpu_atom/cycles/Pu', 4000 Hz, Event count (approx.): 8112794, [percent: local period]
org.apache.fop.layoutmgr.inline.TextLayoutManager.getNextKnuthElements(org.apache.fop.layoutmgr.LayoutContext, int)() /home/acme/.debug/jit/java-jit-20241127.XXF1SRgN/jitted-3912413-4177.so
Percent 0x80 <org.apache.fop.layoutmgr.inline.TextLayoutManager.getNextKnuthElements(org.apache.fop.layoutmgr.LayoutContext, int)>:
nop
movl 0x8(%rsi),%r10d
cmpl 0x8(%rax),%r10d
→ jne 0
movl %eax,-0x14000(%rsp)
pushq %rbp
subq $0xb0,%rsp
nop
cmpl $0x3,0x20(%r15)
↓ jne 7037
2e: movl %ecx,0x28(%rsp)
movq %rdx,%rbp
movl 0x64(%rdx),%ebx
cmpb $0x0,0x38(%r15)
↓ jne 3a44
movq %rsi,0x30(%rsp)
48: movq 0x30(%rsp),%r10
⬢ [acme@toolbox perf-tools-next]$
No source code nor line numbers, that I saw in another build of perf for
RHEL9, for the same workload described in the cset above (a publicly
available java benchmark), so something to investigate on perf upstream
running on fedora, maybe some quirk with the jdk used when building perf
for RHEL 9 and for Fedora 40.
A related patch that should have make this all work is:
"perf inject jit: Add namespaces support"
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=67dec926931448d688efb5fe34f7b5a22470fc0a
But we still need to polish this some more, maybe there are differences
in the agent used in NodeJS with --perf-prof and the jvmti one we're
using.
Hopefully describing all the steps while we investigate this case will
help us improve perf support for profiling JITed environments running in
containers while profiling from inside and outside it.
Reported-by: Francesco Nigro <fnigro@redhat.com>
Reported-by: Ilan Green <igreen@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yonatan Goldschmidt <yonatan.goldschmidt@granulate.io>
Link: https://lore.kernel.org/r/20241206204828.507527-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Depending on how vmlinux.lds is written, _etext might be the very first
data symbol instead of the very last text symbol.
Don't require it to be a text symbol, accept any symbol type.
Comitter notes:
See the first Link for further discussion, but it all boils down to
this:
---
# grep -e _stext -e _etext -e _edata /proc/kallsyms
c0000000 T _stext
c08b8000 D _etext
So there is no _edata and _etext is not text
$ ppc-linux-objdump -x vmlinux | grep -e _stext -e _etext -e _edata
c0000000 g .head.text 00000000 _stext
c08b8000 g .rodata 00000000 _etext
c1378000 g .sbss 00000000 _edata
---
Fixes: ed9adb2035b5be58 ("perf machine: Read also the end of the kernel")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/b3ee1994d95257cb7f2de037c5030ba7d1bed404.1736327613.git.christophe.leroy@csgroup.eu
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since commit 659ad3492b913c90 ("perf maps: Switch from rbtree to lazily
sorted array for addresses"), perf doesn't display anymore kernel
symbols on powerpc, allthough it still detects them as kernel addresses.
# Overhead Command Shared Object Symbol
# ........ .......... ............. ......................................
#
80.49% Coeur main [unknown] [k] 0xc005f0f8
3.91% Coeur main gau [.] engine_loop.constprop.0.isra.0
1.72% Coeur main [unknown] [k] 0xc005f11c
1.09% Coeur main [unknown] [k] 0xc01f82c8
0.44% Coeur main libc.so.6 [.] epoll_wait
0.38% Coeur main [unknown] [k] 0xc0011718
0.36% Coeur main [unknown] [k] 0xc01f45c0
This is because function maps__find_next_entry() now returns current
entry instead of next entry, leading to kernel map end address getting
mis-configured with its own start address instead of the start address
of the following map.
Fix it by really taking the next entry, also make sure that entry
follows current one by making sure entries are sorted.
Fixes: 659ad3492b913c90 ("perf maps: Switch from rbtree to lazily sorted array for addresses")
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/2ea4501209d5363bac71a6757fe91c0747558a42.1736329923.git.christophe.leroy@csgroup.eu
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
I found it failed on machines with limited memory because 16M byte
per-cpu buffer is too big. The reason it added the option is not to
miss tracing data. Thus we can limit the data size by reducing the
function call depth instead of increasing the buffer size to handle the
whole data.
As it used the same option in the test_ftrace_trace() and it was able
to find the sleep function, it should work with the profile subcommand.
Get rid of other grep commands which might be affected by the depth
change.
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20250107224352.1128669-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Like trace subcommand, it should be able to pass some options to control
the tracing behavior for the function graph tracer.
But some options are limited in order to maintain the internal behavior.
For example, it can limit the function call depth like below:
# perf ftrace profile --graph-opts depth=5 -- myprog
Committer testing:
root@number:~# perf ftrace profile --graph-opts thresh=1000 -- sleep 1
# Total (us) Avg (us) Max (us) Count Function
1001419.301 500709.650 1000032.000 2 x64_sys_call
1000032.000 1000032.000 1000032.000 1 __x64_sys_clock_nanosleep
1000032.000 1000032.000 1000032.000 1 common_nsleep
1000031.000 1000031.000 1000031.000 1 do_nanosleep
1000031.000 1000031.000 1000031.000 1 hrtimer_nanosleep
1000024.000 1000024.000 1000024.000 1 schedule
1387.208 1387.208 1387.208 1 __x64_sys_execve
1386.691 1386.691 1386.691 1 do_execveat_common.isra.0
1334.170 1334.170 1334.170 1 bprm_execve
1258.413 1258.413 1258.413 1 load_elf_binary
1123.068 1123.068 1123.068 1 begin_new_exec
1113.550 1113.550 1113.550 1 mmput
1109.237 1109.237 1109.237 1 exit_mmap
root@number:~# perf ftrace profile --graph-opts thresh=1200 -- sleep 1
# Total (us) Avg (us) Max (us) Count Function
1001448.204 500724.102 1000018.000 2 x64_sys_call
1000017.000 1000017.000 1000017.000 1 __x64_sys_clock_nanosleep
1000017.000 1000017.000 1000017.000 1 common_nsleep
1000017.000 1000017.000 1000017.000 1 hrtimer_nanosleep
1000016.000 1000016.000 1000016.000 1 do_nanosleep
1000012.000 1000012.000 1000012.000 1 schedule
1430.112 1430.112 1430.112 1 __x64_sys_execve
1429.581 1429.581 1429.581 1 do_execveat_common.isra.0
1376.289 1376.289 1376.289 1 bprm_execve
1301.743 1301.743 1301.743 1 load_elf_binary
root@number:~#
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250107224352.1128669-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Sometimes users also want to see average latency as well as histogram.
Display latency statistics like avg, max, min at the end.
$ sudo ./perf ftrace latency -ab -T synchronize_rcu -- ...
# DURATION | COUNT | GRAPH |
0 - 1 us | 0 | |
1 - 2 us | 0 | |
2 - 4 us | 0 | |
4 - 8 us | 0 | |
8 - 16 us | 0 | |
16 - 32 us | 0 | |
32 - 64 us | 0 | |
64 - 128 us | 0 | |
128 - 256 us | 0 | |
256 - 512 us | 0 | |
512 - 1024 us | 0 | |
1 - 2 ms | 0 | |
2 - 4 ms | 0 | |
4 - 8 ms | 0 | |
8 - 16 ms | 1 | ##### |
16 - 32 ms | 7 | ######################################## |
32 - 64 ms | 0 | |
64 - 128 ms | 0 | |
128 - 256 ms | 0 | |
256 - 512 ms | 0 | |
512 - 1024 ms | 0 | |
1 - ... s | 0 | |
# statistics (in usec)
total time: 171832
avg time: 21479
max time: 30906
min time: 15869
count: 8
Committer testing:
root@number:~# perf ftrace latency -nab --bucket-range 100 --max-latency 512 -T switch_mm_irqs_off sleep 1
# DURATION | COUNT | GRAPH |
0 - 100 ns | 314 | ## |
100 - 200 ns | 1843 | ############# |
200 - 300 ns | 1390 | ########## |
300 - 400 ns | 844 | ###### |
400 - 500 ns | 480 | ### |
500 - 512 ns | 315 | ## |
512 - ... ns | 16 | |
# statistics (in nsec)
total time: 2448936
avg time: 387
max time: 3285
min time: 82
count: 6328
root@number:~#
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250107224352.1128669-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The existing EBUSY strerror message is:
The sys_perf_event_open() syscall returned with 16 (Device or resource busy) for event (intel_bts//).
"dmesg | grep -i perf" may provide additional information.
The dmesg won't be useful. What is more useful is knowing what
processes are potentially using the PMU, which some procfs scanning can
reveal. When parallel testing tests/shell/stat_all_pmu.sh this yields:
Testing intel_bts//
Error:
The PMU intel_bts counters are busy and in use by another process.
Possible processes:
2585882 perf list
2585902 perf list -j -o /tmp/__perf_test.list_output.json.KF9MY
2585904 perf list
2585911 perf record -e task-clock --filter period > 1 -o /dev/null --quiet true
2585912 perf list
2585915 perf list
2586042 /tmp/perf/perf record -asdg -e cpu-clock -o /tmp/perftool-testsuite_report.dIF/perf_report/perf.data -- sleep 2
2589078 perf record -g -e task-clock:u -o - perf test -w noploop
2589148 /tmp/perf/perf record --control=fifo:control,ack -e cpu-clock -m 1 sleep 10
2589379 perf --buildid-dir /tmp/perf.debug.Umx record --buildid-all -o /tmp/perf.data.YBm /tmp/perf.ex.MD5.ZQW
2589568 perf record -o /tmp/__perf_test.program.mtcZH/perf.data --branch-filter any,save_type,u -- perf test -w brstack
2589649 perf record --per-thread -o /tmp/__perf_test.perf.data.5d3dc perf test -w thloop
2589898 perf record -o /tmp/perf-test-script.BX2b27Dcnj/pp-perf.data --sample-cpu uname
Which gets a little closer to finding the issue.
Committer testing:
root@number:~#
root@number:~# grep -m1 "model name" /proc/cpuinfo
model name : Intel(R) Core(TM) i7-14700K
root@number:~#
Before:
root@number:~# perf stat -e intel_bts// &
[1] 197954
root@number:~# perf test "perf all PMU test"
124: perf all PMU test : FAILED!
root@number:~# perf test -v "perf all PMU test" |& tail
Testing i915/vecs0-busy/
Testing i915/vecs0-sema/
Testing i915/vecs0-wait/
Testing intel_bts//
Unexpected signal in main
Error:
The sys_perf_event_open() syscall returned with 16 (Device or resource busy) for event (intel_bts//).
"dmesg | grep -i perf" may provide additional information.
---- end(-1) ----
124: perf all PMU test : FAILED!
root@number:~#
After:
root@number:~# perf stat -e intel_bts// &
[1] 200195
root@number:~# perf test "perf all PMU test"
123: perf all PMU test : FAILED!
root@number:~# perf test -v "perf all PMU test" |& tail
Testing i915/vecs0-wait/
Testing intel_bts//
Unexpected signal in main
Error:
The PMU intel_bts counters are busy and in use by another process.
Possible processes:
200195 perf stat -e intel_bts//
2319766 /root/bin/perf top --stdio
---- end(-1) ----
123: perf all PMU test : FAILED!
root@number:~#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ze Gao <zegao2021@gmail.com>
Change-Id: Ie1ed8688286c44e8f44a35e98fed8be3e2a344df
Link: https://lore.kernel.org/r/20241106003007.2112584-1-ctshao@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When running in the now default parallel mode this test has been
frequently failing, while when running exclusively, on a quiet system,
it passes.
Since its expectations were established when serial testing was the
norm, mark it as exclusive to get this kind of resunt:
root@x1:~# perf test 106
106: perf script task-analyzer tests : Ok
root@x1:~# set -o vi
root@x1:~# perf stat --null --repeat 10 perf test 106
106: perf script task-analyzer tests : Ok
106: perf script task-analyzer tests : Ok
106: perf script task-analyzer tests : Ok
106: perf script task-analyzer tests : Ok
106: perf script task-analyzer tests : Ok
106: perf script task-analyzer tests : Ok
106: perf script task-analyzer tests : Ok
106: perf script task-analyzer tests : Ok
106: perf script task-analyzer tests : Ok
106: perf script task-analyzer tests : Ok
Performance counter stats for 'perf test 106' (10 runs):
4.8872 +- 0.0179 seconds time elapsed ( +- 0.37% )
root@x1:~#
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
2.41 on riscv
After binutils commit e43d876 which was first included in binutils 2.41,
riscv no longer supports dumping in the middle of instructions.
Increase the objdump window by 2-bytes to ensure that any instruction
that sits on the boundary of the specified stop-address is not cut in
half.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241219-perf_fix_riscv_obj_reading-v3-1-a7d644dcfa50@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
kernel samples
Recently we got a case where a kernel sample wasn't being resolved due
to a bug that was not setting the end address on kernel functions
implemented in assembly (see Link: tag), and then those were not being
found by machine__resolve() -> map__find_symbol().
So we ended up with:
# perf top --stdio
PerfTop: 0 irqs/s kernel: 0% exact: 0% lost: 0/0 drop: 0/0 [cycles/P]
-----------------------------------------------------------------------
Warning:
A vmlinux file was not found.
Kernel samples will not be resolved.
^Z
[1]+ Stopped perf top --stdio
#
But then resolving all other kernel symbols.
So just fixup the logic to only print that warning when there are no
symbols in the kernel map.
Fixes: d88205db9caa0e9d ("perf dso: Add dso__has_symbols() method")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/lkml/Z3buKhcCsZi3_aGb@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
