| Age | Commit message (Collapse) | Author |
|---|
|
Add counts of instructions and cycles, in order to represent
instructions-per-cycle (IPC).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In preparation for providing instructions-per-cycle (IPC) information,
accumulate cycle count from CYC packets.
Although CYC packets are optional (requires config term 'cyc' to enable
cycle-accurate mode when recording), the simplest way to count cycles is
with CYC packets.
The first complication is that cycles must be counted only when also
counting instructions.
That means when control flow packet generation is enabled i.e. between
TIP.PGE and TIP.PGD packets.
Also, sampling the cycle count follows the same rules as sampling the
timestamp, that is, not before the instruction to which the decoder is
walking is reached.
In addition, the cycle count is not accurate for any but the first
branch of a TNT packet.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To eliminate some duplication and make the code more understandable,
factor out intel_pt_update_sample_time.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When DWARF stacks were requested and at the same time that the user
specifies a register set using the --user-regs option the full register
context was being captured on samples:
$ perf record -g --call-graph dwarf,1024 --user-regs=IP,SP,BP -- stack_test2.g.O3
188143843893585 0x6b48 [0x4f8]: PERF_RECORD_SAMPLE(IP, 0x4002): 23828/23828: 0x401236 period: 1363819 addr: 0x7ffedbdd51ac
... FP chain: nr:0
... user regs: mask 0xff0fff ABI 64-bit
.... AX 0x53b
.... BX 0x7ffedbdd3cc0
.... CX 0xffffffff
.... DX 0x33d3a
.... SI 0x7f09b74c38d0
.... DI 0x0
.... BP 0x401260
.... SP 0x7ffedbdd3cc0
.... IP 0x401236
.... FLAGS 0x20a
.... CS 0x33
.... SS 0x2b
.... R8 0x7f09b74c3800
.... R9 0x7f09b74c2da0
.... R10 0xfffffffffffff3ce
.... R11 0x246
.... R12 0x401070
.... R13 0x7ffedbdd5db0
.... R14 0x0
.... R15 0x0
... ustack: size 1024, offset 0xe0
. data_src: 0x5080021
... thread: stack_test2.g.O:23828
...... dso: /root/abudanko/stacks/stack_test2.g.O3
I.e. the --user-regs=IP,SP,BP was being ignored, being overridden by the
needs of --call-graph=dwarf.
After applying the change in this patch the sample data contains the
user specified register, but making sure that at least the minimal set
of register needed for DWARF unwinding (DWARF_MINIMAL_REGS) is
requested.
The user is warned that DWARF unwinding may not work if extra registers
end up being needed.
-g call-graph dwarf,K full_regs
--user-regs=user_regs user_regs
-g call-graph dwarf,K --user-regs=user_regs user_regs + DWARF_MINIMAL_REGS
$ perf record -g --call-graph dwarf,1024 --user-regs=BP -- ls
WARNING: The use of --call-graph=dwarf may require all the user registers, specifying a subset with --user-regs may render DWARF unwinding unreliable, so the minimal registers set (IP, SP) is explicitly forced.
arch COPYING Documentation include Kbuild lbuild MAINTAINERS modules.builtin Module.symvers perf.data.old scripts System.map virt
block CREDITS drivers init Kconfig lib Makefile modules.builtin.modinfo net README security tools vmlinux
certs crypto fs ipc kernel LICENSES mm modules.order perf.data samples sound usr vmlinux.o
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ]
188368474305373 0x5e40 [0x470]: PERF_RECORD_SAMPLE(IP, 0x4002): 23839/23839: 0x401236 period: 1260507 addr: 0x7ffd3d85e96c
... FP chain: nr:0
... user regs: mask 0x1c0 ABI 64-bit
.... BP 0x401260
.... SP 0x7ffd3d85cc20
.... IP 0x401236
... ustack: size 1024, offset 0x58
. data_src: 0x5080021
Committer notes:
Detected build failures on arches where PERF_REGS_ is not available,
such as debian:experimental-x-{mips,mips64,mipsel}, fedora 24 and 30 for
ARC uClibc and glibc, reported to Alexey that provided a patch moving
the DWARF_MINIMAL_REGS from evsel.c to util/perf_regs.h, where it is
guarded by an HAVE_PERF_REGS_SUPPORT ifdef.
Committer testing:
# perf record --user-regs=bp,ax -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.955 MB perf.data (1773 samples) ]
# perf script -F+uregs | grep AX: | head -5
perf 1719 [000] 181.272398: 1 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
perf 1719 [000] 181.272402: 1 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
perf 1719 [000] 181.272403: 8 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
perf 1719 [000] 181.272405: 181 cycles: ffffffffba06a7c6 native_write_msr+0x6 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
perf 1719 [000] 181.272406: 4405 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
# perf record --call-graph=dwarf --user-regs=bp,ax -a sleep 1
WARNING: The use of --call-graph=dwarf may require all the user registers, specifying a subset with --user-regs may render DWARF unwinding unreliable, so the minimal registers set (IP, SP) is explicitly forced.
[ perf record: Woken up 55 times to write data ]
[ perf record: Captured and wrote 24.184 MB perf.data (2841 samples) ]
[root@quaco ~]# perf script --hide-call-graph -F+uregs | grep AX: | head -5
perf 1729 [000] 211.268006: 1 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
perf 1729 [000] 211.268014: 1 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
perf 1729 [000] 211.268017: 5 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
perf 1729 [000] 211.268020: 48 cycles: ffffffffba06a7c6 native_write_msr+0x6 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
perf 1729 [000] 211.268024: 490 cycles: ffffffffba00e471 intel_bts_enable_local+0x21 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
#
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/e7fd37b1-af22-0d94-a0dc-5895e803bbfe@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Variable 'err' is defined but never used in function symsrc__init(),
remove it and directly return -1 at the end of the function.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190530093801.20510-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We forgot to update the perf.data file format document for the
HEADER_DIR_FORMAT header, do it now from comments in the patch
introducing it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chong Jiang <chongjiang@chromium.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Fixes: 258031c017c3 ("perf header: Add DIR_FORMAT feature to describe directory data")
Link: https://lkml.kernel.org/n/tip-jbrzb7ijb5al33gi8br6f9rr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We forgot to update the perf.data file format document for the
HEADER_CLOCKID header, do it now from comments in the patch introducing
it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chong Jiang <chongjiang@chromium.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Fixes: cf7905165fee ("perf record: Encode -k clockid frequency into Perf trace")
Link: https://lkml.kernel.org/n/tip-slhnjp06027j3ae17qqetzxj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We forgot to update the perf.data file format document for the
HEADER_MEM_TOPOLOGY header, do it now from comments in the patch
introducing it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chong Jiang <chongjiang@chromium.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Simon Que <sque@chromium.org>
Fixes: e2091cedd51b ("perf tools: Add MEM_TOPOLOGY feature to perf data file")
Link: https://lkml.kernel.org/n/tip-h5lcm1nbe9ztxwm61gmadd56@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch addes description of HEADER_BPF_PROG_INFO and HEADER_BPF_BTF to
perf.data-file-format.txt.
Requested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 606f972b1361 ("perf bpf: Save bpf_prog_info information as headers to perf.data")
Link: http://lkml.kernel.org/r/20190521064406.2498925-1-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"On the kernel side there's a bunch of ring-buffer ordering fixes for a
reproducible bug, plus a PEBS constraints regression fix.
Plus tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools headers UAPI: Sync kvm.h headers with the kernel sources
perf record: Fix s390 missing module symbol and warning for non-root users
perf machine: Read also the end of the kernel
perf test vmlinux-kallsyms: Ignore aliases to _etext when searching on kallsyms
perf session: Add missing swap ops for namespace events
perf namespace: Protect reading thread's namespace
tools headers UAPI: Sync drm/drm.h with the kernel
tools headers UAPI: Sync drm/i915_drm.h with the kernel
tools headers UAPI: Sync linux/fs.h with the kernel
tools headers UAPI: Sync linux/sched.h with the kernel
tools arch x86: Sync asm/cpufeatures.h with the with the kernel
tools include UAPI: Update copy of files related to new fspick, fsmount, fsconfig, fsopen, move_mount and open_tree syscalls
perf arm64: Fix mksyscalltbl when system kernel headers are ahead of the kernel
perf data: Fix 'strncat may truncate' build failure with recent gcc
perf/ring-buffer: Use regular variables for nesting
perf/ring-buffer: Always use {READ,WRITE}_ONCE() for rb->user_page data
perf/ring_buffer: Add ordering to rb->nest increment
perf/ring_buffer: Fix exposing a temporarily decreased data_head
perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints
|
|
Based on 1 normalized pattern(s):
licensed under the terms of the gnu gpl license version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 62 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.929121379@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Returning 1 from intel_pt_sync_switch() causes the current tid to be
set. That negates the need to keep next_tid anymore. Rationalize the
code to that effect.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190412113830.4126-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
sync_switch is a facility to synchronize decoding more closely with the
point in the kernel when the context actually switched.
Improve it by processing "context switch in" events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190412113830.4126-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
pyside2 is the future for pyside support.
Note pyside use Qt4 whereas pyside2 uses Qt5.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190412113830.4126-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
pyside2 is the future for pyside support.
Note pyside use Qt4 whereas pyside2 uses Qt5.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190412113830.4126-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
pyside2 is the future for pyside support.
Note pyside use Qt4 whereas pyside2 uses Qt5.
Committer testing:
On a system with just:
# rpm -qa| grep -i pyside
python2-pyside-1.2.4-7.fc29.x86_64
#
Running:
$ python ~acme/libexec/perf-core/scripts/python/exported-sql-viewer.py ~/c/adrian.hunter/simple-retpoline.db &
[1] 7438
Makes it use the pyside 1 files:
$ grep -i pyside /proc/7438/maps | cut -d ' ' -f 6- | sort -u
/usr/lib64/libpyside-python2.7.so.1.2.4
/usr/lib64/python2.7/site-packages/PySide/QtCore.so
/usr/lib64/python2.7/site-packages/PySide/QtGui.so
/usr/lib64/python2.7/site-packages/PySide/QtSql.so
$ rpm -qf /usr/lib64/libpyside-python2.7.so.1.2.4
python2-pyside-1.2.4-7.fc29.x86_64
$
To get PySide2 I guess one needs to do:
$ pip install PySide2
But thats a 142MiB download I can't do right now, perhaps before pushing
upstream...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190412113830.4126-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
argument parsing
The argparse module makes it easier to add new arguments.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190412113830.4126-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now that there is also support for python3, there is no need to specify
python2 explicitly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190412113830.4126-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
pre-existing BPF programs
Move it from being a pr_warning() to a pr_debug(). Also capitalize BPF
and explain what gets missing when we're not able to synthesize these
events: we'll not be able to resolve symbols, etc.
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-whpnfnw6xtd939odgt9bw9as@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some distros put -fstack-protector-strong in the compiler flags to be
used to build python extensions, but then, the clang version in that
distro doesn't know about that, only gcc does.
Check if that is the case and remove it from the set of options used to
build the python binding with clang.
Case at hand:
oraclelinux:7
$ head -2 /etc/os-release
NAME="Oracle Linux Server"
VERSION="7.6"
$ grep stack-protector /usr/lib64/python2.7/_sysconfigdata.py | head -1 | cut -c-120
'CFLAGS': '-fno-strict-aliasing -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --para
$
gcc version 4.8.5 20150623 (Red Hat 4.8.5-36.0.1) (GCC)
clang version 3.4.2 (tags/RELEASE_34/dot2-final)
clang: error: unknown argument: '-fstack-protector-strong'
clang: error: unknown argument: '-fstack-protector-strong'
error: command 'clang' failed with exit status 1
cp: cannot stat '/tmp/build/perf/python_ext_build/lib/perf*.so': No such file or directory
make[2]: *** [/tmp/build/perf/python/perf.so] Error 1
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-brmp2415zxpbhz45etkgjoma@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
initialization
Some compilers will complain when using a member of a struct to
initialize another member, in the same struct initialization.
For instance:
debian:8 Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
oraclelinux:7 clang version 3.4.2 (tags/RELEASE_34/dot2-final)
Produce:
ui/browsers/annotate.c:104:12: error: variable 'ops' is uninitialized when used within its own initialization [-Werror,-Wuninitialized]
(!ops.current_entry ||
^~~
1 error generated.
So use an extra variable, initialized just before that struct, to have
the value used in the expressions used to init two of the struct
members.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: c298304bd747 ("perf annotate: Use a ops table for annotation_line__write()")
Link: https://lkml.kernel.org/n/tip-f9nexro58q62l3o9hez8hr0i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Return NULL instead of null-terminating version char array when fgets
fails due to end-of-file or error.
Signed-off-by: Donald Yandt <donald.yandt@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Fixes: 30ba5b0e66c8 ("perf machine: Null-terminate version char array upon fgets(/proc/version) error")
Link: http://lkml.kernel.org/r/20190528134128.30841-1-donald.yandt@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Bumping it from just 4:
Before:
$ perf -v
perf version 5.2.rc1.g80978f
$
After:
$ perf -v
perf version 5.2.rc1.g80978fc864c5
$
Requested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-p4yun2nxlo7eeeohyx5v4kw7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There's no need to display "ksymbol event with" text for the
PERF_RECORD_KSYMBOL event and "bpf event with" test for the
PERF_RECORD_BPF_EVENT event.
Remove it so it also goes along with other side-band events display.
Before:
# perf script --show-bpf-events
...
swapper 0 [000] 0.000000: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0ef971d len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174
swapper 0 [000] 0.000000: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 36
After:
# perf script --show-bpf-events
...
swapper 0 [000] 0.000000: PERF_RECORD_KSYMBOL addr ffffffffc0ef971d len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174
swapper 0 [000] 0.000000: PERF_RECORD_BPF_EVENT type 1, flags 0, id 36
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add the --show-bpf-events command line option to show the eBPF related events:
PERF_RECORD_KSYMBOL
PERF_RECORD_BPF_EVENT
Usage:
# perf record -a
...
# perf script --show-bpf-events
...
swapper 0 [000] 0.000000: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0ef971d len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174
swapper 0 [000] 0.000000: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 36
...
Committer testing:
# perf script --show-bpf-events | egrep -i 'PERF_RECORD_(BPF|KSY)'
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc029a6c3 len 229 type 1 flags 0x0 name bpf_prog_7be49e3934a125ba
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 47
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc029c1ae len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 48
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc02ddd1c len 229 type 1 flags 0x0 name bpf_prog_7be49e3934a125ba
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 49
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc02dfc11 len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 50
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc045da0a len 229 type 1 flags 0x0 name bpf_prog_7be49e3934a125ba
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 51
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc04ef4b4 len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 52
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc09e15da len 229 type 1 flags 0x0 name bpf_prog_7be49e3934a125ba
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 53
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0d2b1a3 len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 54
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0fd9850 len 381 type 1 flags 0x0 name bpf_prog_819967866022f1e1_sys_enter
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 179
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0feb1ec len 191 type 1 flags 0x0 name bpf_prog_c1bd85c092d6e4aa_sys_exit
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 180
^C[root@quaco pt]# perf evlist
intel_pt//ku
dummy:u
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add map_groups__merge_in test to test the map_groups__merge_in function
usage - merging kcore maps into existing eBPF maps.
Committer testing:
# perf test merge
59: map_groups__merge_in : Ok
# perf test -v merge
59: map_groups__merge_in :
--- start ---
test child forked, pid 8349
test child finished with 0
---- end ----
map_groups__merge_in: Ok
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pad the DSO name in --call-trace so we don't have the indent screwed by
different DSO name lengths, as now for kernel there's also BPF code
displayed.
# perf-with-kcore record pt -e intel_pt//ku -- sleep 1
# perf-core/perf-with-kcore script pt --call-trace
Before:
sleep 3660 [16] 57036.806464404: ([kernel.kallsyms]) kretprobe_perf_func
sleep 3660 [16] 57036.806464404: ([kernel.kallsyms]) trace_call_bpf
sleep 3660 [16] 57036.806464404: ([kernel.kallsyms]) __x86_indirect_thunk_rax
sleep 3660 [16] 57036.806464404: ([kernel.kallsyms]) __x86_indirect_thunk_rax
sleep 3660 [16] 57036.806464725: (bpf_prog_da4fe6b3d2c29b25_trace_return) bpf_get_current_pid_tgid
sleep 3660 [16] 57036.806464725: (bpf_prog_da4fe6b3d2c29b25_trace_return) bpf_ktime_get_ns
sleep 3660 [16] 57036.806464725: ([kernel.kallsyms]) __x86_indirect_thunk_rax
sleep 3660 [16] 57036.806464725: ([kernel.kallsyms]) __x86_indirect_thunk_rax
sleep 3660 [16] 57036.806465045: (bpf_prog_da4fe6b3d2c29b25_trace_return) __htab_map_lookup_elem
sleep 3660 [16] 57036.806465366: ([kernel.kallsyms]) memcmp
sleep 3660 [16] 57036.806465687: (bpf_prog_da4fe6b3d2c29b25_trace_return) bpf_probe_read
sleep 3660 [16] 57036.806465687: ([kernel.kallsyms]) probe_kernel_read
sleep 3660 [16] 57036.806465687: ([kernel.kallsyms]) __check_object_size
sleep 3660 [16] 57036.806465687: ([kernel.kallsyms]) check_stack_object
sleep 3660 [16] 57036.806465687: ([kernel.kallsyms]) copy_user_enhanced_fast_string
sleep 3660 [16] 57036.806465687: (bpf_prog_da4fe6b3d2c29b25_trace_return) bpf_probe_read
sleep 3660 [16] 57036.806465687: ([kernel.kallsyms]) probe_kernel_read
sleep 3660 [16] 57036.806465687: ([kernel.kallsyms]) __check_object_size
sleep 3660 [16] 57036.806465687: ([kernel.kallsyms]) check_stack_object
sleep 3660 [16] 57036.806465687: ([kernel.kallsyms]) copy_user_enhanced_fast_string
sleep 3660 [16] 57036.806466008: (bpf_prog_da4fe6b3d2c29b25_trace_return) bpf_get_current_uid_gid
sleep 3660 [16] 57036.806466008: ([kernel.kallsyms]) from_kgid
sleep 3660 [16] 57036.806466008: ([kernel.kallsyms]) from_kuid
sleep 3660 [16] 57036.806466008: (bpf_prog_da4fe6b3d2c29b25_trace_return) bpf_perf_event_output
sleep 3660 [16] 57036.806466328: ([kernel.kallsyms]) perf_event_output
sleep 3660 [16] 57036.806466328: ([kernel.kallsyms]) perf_prepare_sample
sleep 3660 [16] 57036.806466328: ([kernel.kallsyms]) perf_misc_flags
sleep 3660 [16] 57036.806466328: ([kernel.kallsyms]) __x86_indirect_thunk_rax
sleep 3660 [16] 57036.806466328: ([kernel.kallsyms]) __x86_indirect_thunk_rax
sleep 3660 [16] 57036.806466328: ([kvm]) kvm_is_in_guest
sleep 3660 [16] 57036.806466649: ([kernel.kallsyms]) __perf_event_header__init_id.isra.0
sleep 3660 [16] 57036.806466649: ([kernel.kallsyms]) perf_output_begin
After:
sleep 3660 [16] 57036.806464404: ([kernel.kallsyms] ) kretprobe_perf_func
sleep 3660 [16] 57036.806464404: ([kernel.kallsyms] ) trace_call_bpf
sleep 3660 [16] 57036.806464404: ([kernel.kallsyms] ) __x86_indirect_thunk_rax
sleep 3660 [16] 57036.806464404: ([kernel.kallsyms] ) __x86_indirect_thunk_rax
sleep 3660 [16] 57036.806464725: (bpf_prog_da4fe6b3d2c29b25_trace_return ) bpf_get_current_pid_tgid
sleep 3660 [16] 57036.806464725: (bpf_prog_da4fe6b3d2c29b25_trace_return ) bpf_ktime_get_ns
sleep 3660 [16] 57036.806464725: ([kernel.kallsyms] ) __x86_indirect_thunk_rax
sleep 3660 [16] 57036.806464725: ([kernel.kallsyms] ) __x86_indirect_thunk_rax
sleep 3660 [16] 57036.806465045: (bpf_prog_da4fe6b3d2c29b25_trace_return ) __htab_map_lookup_elem
sleep 3660 [16] 57036.806465366: ([kernel.kallsyms] ) memcmp
sleep 3660 [16] 57036.806465687: (bpf_prog_da4fe6b3d2c29b25_trace_return ) bpf_probe_read
sleep 3660 [16] 57036.806465687: ([kernel.kallsyms] ) probe_kernel_read
sleep 3660 [16] 57036.806465687: ([kernel.kallsyms] ) __check_object_size
sleep 3660 [16] 57036.806465687: ([kernel.kallsyms] ) check_stack_object
sleep 3660 [16] 57036.806465687: ([kernel.kallsyms] ) copy_user_enhanced_fast_string
sleep 3660 [16] 57036.806465687: (bpf_prog_da4fe6b3d2c29b25_trace_return ) bpf_probe_read
sleep 3660 [16] 57036.806465687: ([kernel.kallsyms] ) probe_kernel_read
sleep 3660 [16] 57036.806465687: ([kernel.kallsyms] ) __check_object_size
sleep 3660 [16] 57036.806465687: ([kernel.kallsyms] ) check_stack_object
sleep 3660 [16] 57036.806465687: ([kernel.kallsyms] ) copy_user_enhanced_fast_string
sleep 3660 [16] 57036.806466008: (bpf_prog_da4fe6b3d2c29b25_trace_return ) bpf_get_current_uid_gid
sleep 3660 [16] 57036.806466008: ([kernel.kallsyms] ) from_kgid
sleep 3660 [16] 57036.806466008: ([kernel.kallsyms] ) from_kuid
sleep 3660 [16] 57036.806466008: (bpf_prog_da4fe6b3d2c29b25_trace_return ) bpf_perf_event_output
sleep 3660 [16] 57036.806466328: ([kernel.kallsyms] ) perf_event_output
sleep 3660 [16] 57036.806466328: ([kernel.kallsyms] ) perf_prepare_sample
sleep 3660 [16] 57036.806466328: ([kernel.kallsyms] ) perf_misc_flags
sleep 3660 [16] 57036.806466328: ([kernel.kallsyms] ) __x86_indirect_thunk_rax
sleep 3660 [16] 57036.806466328: ([kernel.kallsyms] ) __x86_indirect_thunk_rax
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add BPF related code into DSO reading paths to return size (bpf_size)
and read the BPF code (bpf_read).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-5-jolsa@kernel.org
[ Use uintptr_t when casting from u64 to u8 pointers ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There's no need for the while loop now, also we can connect two (ret >
0) condition legs together.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the file specific code in the dso_cache__read function to a
separate file_read function. I'll add BPF specific code in the following
patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Moving file specific code in dso__data_file_size function into separate
file_size function. I'll add bpf specific code in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The namespaces and comm fields of a thread are protected by rwsem and
require write access for it. So it ended up using a cast to remove
the const qualifier. Let's get rid of the const then.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Link: http://lkml.kernel.org/r/20190527061149.168640-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since 'perf record' already have this option, let's have it for 'perf top'
as well.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Link: http://lkml.kernel.org/r/20190522053250.207156-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use existing beautifiers for the first arg, fd, assigned using the
heuristic that looks for syscall arg names and associates SCA_FD with
'fd' named argumes, and wire up the recently introduced sync_file_range
flags table generator.
Now it should be possible to just use:
perf trace -e sync_file_range
As root and see all sync_file_range syscalls with its args beautified.
Doing a syscall strace like session looking for this syscall, then run
postgresql's initdb command:
# perf trace -e sync_file_range
<SNIP>
initdb/1332 sync_file_range(6</var/lib/pgsql/data/global/1260_fsm>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(6</var/lib/pgsql/data/global/1260_fsm>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(7</var/lib/pgsql/data/base/1/2682>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(6</var/lib/pgsql/data/global/1260_fsm>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(7</var/lib/pgsql/data/base/1/2682>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(6</var/lib/pgsql/data/global/1260_fsm>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(4</var/lib/pgsql/data>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(4</var/lib/pgsql/data>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
^C
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8tqy34xhpg8gwnaiv74xy93w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
$ tools/perf/trace/beauty/sync_file_range.sh
static const char *sync_file_range_flags[] = {
[ilog2(1) + 1] = "WAIT_BEFORE",
[ilog2(2) + 1] = "WRITE",
[ilog2(4) + 1] = "WAIT_AFTER",
};
$
When all are the above are present, then we have something called
SYNC_FILE_RANGE_WRITE_AND_WAIT, that will be special cased in the
upcoming scnprintf beautifier for this flags arg.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-uf2vd7bc8fkz65j7yit8dh84@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In addition to the older flags. This will allow something like this to
be implemented in 'perf trace"
perf trace -e clone/PIDFD in flags/
I.e. ask for strace like tracing, system wide, looking for 'clone'
syscalls that have the CLONE_PIDFD bit set in the 'flags' arg.
For now we'll just see PIDFD if it is set in the 'flags' arg.
Cc: Christian Brauner <christian@brauner.io>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-drq9h7s8gcv8b87064fp6lb0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use existing beautifiers for the first arg, fd, assigned using the
heuristic that looks for syscall arg names and associates SCA_FD with
'fd' named argumes, and wire up the recently introduced fsmount
attr_flags table generator.
Now it should be possible to just use:
perf trace -e fsmount
As root and see all fsmount syscalls with its args beautified.
# cat sys_fsmount.c
#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <unistd.h>
#include <sys/syscall.h> /* For SYS_xxx definitions */
#define __NR_fsmount 432
#define MOUNT_ATTR_RDONLY 0x00000001 /* Mount read-only */
#define MOUNT_ATTR_NOSUID 0x00000002 /* Ignore suid and sgid bits */
#define MOUNT_ATTR_NODEV 0x00000004 /* Disallow access to device special files */
#define MOUNT_ATTR_NOEXEC 0x00000008 /* Disallow program execution */
#define MOUNT_ATTR__ATIME 0x00000070 /* Setting on how atime should be updated */
#define MOUNT_ATTR_RELATIME 0x00000000 /* - Update atime relative to mtime/ctime. */
#define MOUNT_ATTR_NOATIME 0x00000010 /* - Do not update access times. */
#define MOUNT_ATTR_STRICTATIME 0x00000020 /* - Always perform atime updates */
#define MOUNT_ATTR_NODIRATIME 0x00000080 /* Do not update directory access times */
static inline int sys_fsmount(int fs_fd, int flags, int attr_flags)
{
syscall(__NR_fsmount, fs_fd, flags, attr_flags);
}
int main(int argc, char *argv[])
{
int attr_flags = 0, fs_fd = 0;
sys_fsmount(fs_fd++, 0, attr_flags);
attr_flags |= MOUNT_ATTR_RDONLY;
sys_fsmount(fs_fd++, 1, attr_flags);
attr_flags |= MOUNT_ATTR_NOSUID;
sys_fsmount(fs_fd++, 0, attr_flags);
attr_flags |= MOUNT_ATTR_NODEV;
sys_fsmount(fs_fd++, 1, attr_flags);
attr_flags |= MOUNT_ATTR_NOEXEC;
sys_fsmount(fs_fd++, 0, attr_flags);
attr_flags |= MOUNT_ATTR_NOATIME;
sys_fsmount(fs_fd++, 1, attr_flags);
attr_flags |= MOUNT_ATTR_STRICTATIME;
sys_fsmount(fs_fd++, 0, attr_flags);
attr_flags |= MOUNT_ATTR_NODIRATIME;
sys_fsmount(fs_fd++, 0, attr_flags);
return 0;
}
#
# perf trace -e fsmount ./sys_fsmount
fsmount(0, 0, MOUNT_ATTR_RELATIME) = -1 EINVAL (Invalid argument)
fsmount(1, FSMOUNT_CLOEXEC, MOUNT_ATTR_RDONLY|MOUNT_ATTR_RELATIME) = -1 EINVAL (Invalid argument)
fsmount(2, 0, MOUNT_ATTR_RDONLY|MOUNT_ATTR_NOSUID|MOUNT_ATTR_RELATIME) = -1 EINVAL (Invalid argument)
fsmount(3, FSMOUNT_CLOEXEC, MOUNT_ATTR_RDONLY|MOUNT_ATTR_NOSUID|MOUNT_ATTR_NODEV|MOUNT_ATTR_RELATIME) = -1 EBADF (Bad file descriptor)
fsmount(4, 0, MOUNT_ATTR_RDONLY|MOUNT_ATTR_NOSUID|MOUNT_ATTR_NODEV|MOUNT_ATTR_NOEXEC|MOUNT_ATTR_RELATIME) = -1 EBADF (Bad file descriptor)
fsmount(5, FSMOUNT_CLOEXEC, MOUNT_ATTR_RDONLY|MOUNT_ATTR_NOSUID|MOUNT_ATTR_NODEV|MOUNT_ATTR_NOEXEC|MOUNT_ATTR_NOATIME) = -1 EBADF (Bad file descriptor)
fsmount(6, 0, MOUNT_ATTR_RDONLY|MOUNT_ATTR_NOSUID|MOUNT_ATTR_NODEV|MOUNT_ATTR_NOEXEC|MOUNT_ATTR_NOATIME|MOUNT_ATTR_STRICTATIME) = -1 EINVAL (Invalid argument)
fsmount(7, 0, MOUNT_ATTR_RDONLY|MOUNT_ATTR_NOSUID|MOUNT_ATTR_NODEV|MOUNT_ATTR_NOEXEC|MOUNT_ATTR_NOATIME|MOUNT_ATTR_STRICTATIME|MOUNT_ATTR_NODIRATIME) = -1 EINVAL (Invalid argument)
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-w71uge0sfo6ns9uclhwtthca@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
So that one can just define a strarray and process it as a set of flags,
similar to syscall_arg__scnprintf_strarray() with plain arrays.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-nnt25wkpkow2w0yefhi6sb7q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
$ tools/perf/trace/beauty/fsmount.sh
static const char *fsmount_attr_flags[] = {
[ilog2(0x00000001) + 1] = "RDONLY",
[ilog2(0x00000002) + 1] = "NOSUID",
[ilog2(0x00000004) + 1] = "NODEV",
[ilog2(0x00000008) + 1] = "NOEXEC",
[ilog2(0x00000010) + 1] = "NOATIME",
[ilog2(0x00000020) + 1] = "STRICTATIME",
[ilog2(0x00000080) + 1] = "NODIRATIME",
}
MOUNT_ATTR__ATIME and MOUNT_ATTR_RELATIME will be special cased in the
fsmount__scnprintf_flags() beautifier.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-sl24d7m2ge82mfmrbaf1mb0s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use existing beautifiers for the first arg, fd, assigned using the
heuristic that looks for syscall arg names and associates SCA_FD with
'fd' named argumes, and wire up the recently introduced fsconfig cmd
table generator.
Now it should be possible to just use:
perf trace -e fsconfig
As root and see all fsconfig syscalls with its args beautified, more
work needed to look at the command and according to it handle the 'key',
'value' and 'aux' args, using the 'fcntl' and 'futex' beautifiers as a
starting point to see how to suppress sets of these last three args that
may not be used by the 'cmd' arg, etc.
# cat sys_fsconfig.c
#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <unistd.h>
#include <sys/syscall.h> /* For SYS_xxx definitions */
#include <fcntl.h>
#define __NR_fsconfig 431
enum fsconfig_command {
FSCONFIG_SET_FLAG = 0, /* Set parameter, supplying no value */
FSCONFIG_SET_STRING = 1, /* Set parameter, supplying a string value */
FSCONFIG_SET_BINARY = 2, /* Set parameter, supplying a binary blob value */
FSCONFIG_SET_PATH = 3, /* Set parameter, supplying an object by path */
FSCONFIG_SET_PATH_EMPTY = 4, /* Set parameter, supplying an object by (empty) path */
FSCONFIG_SET_FD = 5, /* Set parameter, supplying an object by fd */
FSCONFIG_CMD_CREATE = 6, /* Invoke superblock creation */
FSCONFIG_CMD_RECONFIGURE = 7, /* Invoke superblock reconfiguration */
};
static inline int sys_fsconfig(int fd, int cmd, const char *key, const void *value, int aux)
{
syscall(__NR_fsconfig, fd, cmd, key, value, aux);
}
int main(int argc, char *argv[])
{
int fd = 0, aux = 0;
open("/foo", 0);
sys_fsconfig(fd++, FSCONFIG_SET_FLAG, "/foo1", "/bar1", aux++);
sys_fsconfig(fd++, FSCONFIG_SET_STRING, "/foo2", "/bar2", aux++);
sys_fsconfig(fd++, FSCONFIG_SET_BINARY, "/foo3", "/bar3", aux++);
sys_fsconfig(fd++, FSCONFIG_SET_PATH, "/foo4", "/bar4", aux++);
sys_fsconfig(fd++, FSCONFIG_SET_PATH_EMPTY, "/foo5", "/bar5", aux++);
sys_fsconfig(fd++, FSCONFIG_SET_FD, "/foo6", "/bar6", aux++);
sys_fsconfig(fd++, FSCONFIG_CMD_CREATE, "/foo7", "/bar7", aux++);
sys_fsconfig(fd++, FSCONFIG_CMD_RECONFIGURE, "/foo8", "/bar8", aux++);
return 0;
}
# trace -e fsconfig ./sys_fsconfig
fsconfig(0, FSCONFIG_SET_FLAG, 0x40201b, 0x402015, 0) = -1 EINVAL (Invalid argument)
fsconfig(1, FSCONFIG_SET_STRING, 0x402027, 0x402021, 1) = -1 EINVAL (Invalid argument)
fsconfig(2, FSCONFIG_SET_BINARY, 0x402033, 0x40202d, 2) = -1 EINVAL (Invalid argument)
fsconfig(3, FSCONFIG_SET_PATH, 0x40203f, 0x402039, 3) = -1 EBADF (Bad file descriptor)
fsconfig(4, FSCONFIG_SET_PATH_EMPTY, 0x40204b, 0x402045, 4) = -1 EBADF (Bad file descriptor)
fsconfig(5, FSCONFIG_SET_FD, 0x402057, 0x402051, 5) = -1 EINVAL (Invalid argument)
fsconfig(6, FSCONFIG_CMD_CREATE, 0x402063, 0x40205d, 6) = -1 EINVAL (Invalid argument)
fsconfig(7, FSCONFIG_CMD_RECONFIGURE, 0x40206f, 0x402069, 7) = -1 EINVAL (Invalid argument)
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-fb04b76cm59zfuv1wzu40uxy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
$ tools/perf/trace/beauty/fsconfig.sh
static const char *fsconfig_cmds[] = {
[0] = "SET_FLAG",
[1] = "SET_STRING",
[2] = "SET_BINARY",
[3] = "SET_PATH",
[4] = "SET_PATH_EMPTY",
[5] = "SET_FD",
[6] = "CMD_CREATE",
[7] = "CMD_RECONFIGURE",
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-u721396rkqmawmt91dwwsntu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use existing beautifiers for the first 2 args (dfd, path) and wire up
the recently introduced fspick flags table generator.
Now it should be possible to just use:
perf trace -e fspick
As root and see all move_mount syscalls with its args beautified, either
using the vfs_getname perf probe method or using the
augmented_raw_syscalls.c eBPF helper to get the pathnames, the other
args should work in all cases, i.e. all that is needed can be obtained
directly from the raw_syscalls:sys_enter tracepoint args.
# cat sys_fspick.c
#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <unistd.h>
#include <sys/syscall.h> /* For SYS_xxx definitions */
#include <fcntl.h>
#define __NR_fspick 433
#define FSPICK_CLOEXEC 0x00000001
#define FSPICK_SYMLINK_NOFOLLOW 0x00000002
#define FSPICK_NO_AUTOMOUNT 0x00000004
#define FSPICK_EMPTY_PATH 0x00000008
static inline int sys_fspick(int fd, const char *path, int flags)
{
syscall(__NR_fspick, fd, path, flags);
}
int main(int argc, char *argv[])
{
int flags = 0, fd = 0;
open("/foo", 0);
sys_fspick(fd++, "/foo1", flags);
flags |= FSPICK_CLOEXEC;
sys_fspick(fd++, "/foo2", flags);
flags |= FSPICK_SYMLINK_NOFOLLOW;
sys_fspick(fd++, "/foo3", flags);
flags |= FSPICK_NO_AUTOMOUNT;
sys_fspick(fd++, "/foo4", flags);
flags |= FSPICK_EMPTY_PATH;
return sys_fspick(fd++, "/foo5", flags);
}
# perf trace -e fspick ./sys_fspick
LLVM: dumping /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
fspick(0, "/foo1", 0) = -1 ENOENT (No such file or directory)
fspick(1, "/foo2", FSPICK_CLOEXEC) = -1 ENOENT (No such file or directory)
fspick(2, "/foo3", FSPICK_CLOEXEC|FSPICK_SYMLINK_NOFOLLOW) = -1 ENOENT (No such file or directory)
fspick(3, "/foo4", FSPICK_CLOEXEC|FSPICK_SYMLINK_NOFOLLOW|FSPICK_NO_AUTOMOUNT) = -1 ENOENT (No such file or directory)
fspick(4, "/foo5", FSPICK_CLOEXEC|FSPICK_SYMLINK_NOFOLLOW|FSPICK_NO_AUTOMOUNT|FSPICK_EMPTY_PATH) = -1 ENOENT (No such file or directory)
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-erau5xjtt8wvgnhvdbchstuk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
$ tools/perf/trace/beauty/fspick.sh
static const char *fspick_flags[] = {
[ilog2(0x00000001) + 1] = "CLOEXEC",
[ilog2(0x00000002) + 1] = "SYMLINK_NOFOLLOW",
[ilog2(0x00000004) + 1] = "NO_AUTOMOUNT",
[ilog2(0x00000008) + 1] = "EMPTY_PATH",
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8i16btocq1ax2u6542ya79t5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use existing beautifiers for the first 4 args (to/from fds, pathnames)
and wire up the recently introduced move_mount flags table generator.
Now it should be possible to just use:
perf trace -e move_mount
As root and see all move_mount syscalls with its args beautified, except
for the filenames, that need work in the augmented_raw_syscalls.c eBPF
helper to pass more than one, see comment in the
augmented_raw_syscalls.c source code, the other args should work in all
cases, i.e. all that is needed can be obtained directly from the
raw_syscalls:sys_enter tracepoint args.
Running without the strace "skin" (.perfconfig setting output formatting
switches to look like strace output + BPF to collect strings, as we
still need to support collecting multiple string args for the same
syscall, like with move_mount):
# cat sys_move_mount.c
#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <unistd.h>
#include <sys/syscall.h> /* For SYS_xxx definitions */
#define __NR_move_mount 429
#define MOVE_MOUNT_F_SYMLINKS 0x00000001 /* Follow symlinks on from path */
#define MOVE_MOUNT_F_AUTOMOUNTS 0x00000002 /* Follow automounts on from path */
#define MOVE_MOUNT_F_EMPTY_PATH 0x00000004 /* Empty from path permitted */
#define MOVE_MOUNT_T_SYMLINKS 0x00000010 /* Follow symlinks on to path */
#define MOVE_MOUNT_T_AUTOMOUNTS 0x00000020 /* Follow automounts on to path */
#define MOVE_MOUNT_T_EMPTY_PATH 0x00000040 /* Empty to path permitted */
static inline int sys_move_mount(int from_fd, const char *from_pathname,
int to_fd, const char *to_pathname,
int flags)
{
syscall(__NR_move_mount, from_fd, from_pathname, to_fd, to_pathname, flags);
}
int main(int argc, char *argv[])
{
int flags = 0, from_fd = 0, to_fd = 100;
sys_move_mount(from_fd++, "/foo", to_fd++, "bar", flags);
flags |= MOVE_MOUNT_F_SYMLINKS;
sys_move_mount(from_fd++, "/foo1", to_fd++, "bar1", flags);
flags |= MOVE_MOUNT_F_AUTOMOUNTS;
sys_move_mount(from_fd++, "/foo2", to_fd++, "bar2", flags);
flags |= MOVE_MOUNT_F_EMPTY_PATH;
sys_move_mount(from_fd++, "/foo3", to_fd++, "bar3", flags);
flags |= MOVE_MOUNT_T_SYMLINKS;
sys_move_mount(from_fd++, "/foo4", to_fd++, "bar4", flags);
flags |= MOVE_MOUNT_T_AUTOMOUNTS;
sys_move_mount(from_fd++, "/foo5", to_fd++, "bar5", flags);
flags |= MOVE_MOUNT_T_EMPTY_PATH;
return sys_move_mount(from_fd++, "/foo6", to_fd++, "bar6", flags);
}
# mv ~/.perfconfig ~/.perfconfig.OFF
# perf trace -e move_mount ./sys_move_mount
0.000 ( 0.009 ms): sys_move_mount/28971 move_mount(from_pathname: 0x402010, to_dfd: 100, to_pathname: 0x402015) = -1 ENOENT (No such file or directory)
0.011 ( 0.003 ms): sys_move_mount/28971 move_mount(from_dfd: 1, from_pathname: 0x40201e, to_dfd: 101, to_pathname: 0x402019, flags: F_SYMLINKS) = -1 ENOENT (No such file or directory)
0.016 ( 0.002 ms): sys_move_mount/28971 move_mount(from_dfd: 2, from_pathname: 0x402029, to_dfd: 102, to_pathname: 0x402024, flags: F_SYMLINKS|F_AUTOMOUNTS) = -1 ENOENT (No such file or directory)
0.020 ( 0.002 ms): sys_move_mount/28971 move_mount(from_dfd: 3, from_pathname: 0x402034, to_dfd: 103, to_pathname: 0x40202f, flags: F_SYMLINKS|F_AUTOMOUNTS|F_EMPTY_PATH) = -1 ENOENT (No such file or directory)
0.023 ( 0.002 ms): sys_move_mount/28971 move_mount(from_dfd: 4, from_pathname: 0x40203f, to_dfd: 104, to_pathname: 0x40203a, flags: F_SYMLINKS|F_AUTOMOUNTS|F_EMPTY_PATH|T_SYMLINKS) = -1 ENOENT (No such file or directory)
0.027 ( 0.002 ms): sys_move_mount/28971 move_mount(from_dfd: 5, from_pathname: 0x40204a, to_dfd: 105, to_pathname: 0x402045, flags: F_SYMLINKS|F_AUTOMOUNTS|F_EMPTY_PATH|T_SYMLINKS|T_AUTOMOUNTS) = -1 ENOENT (No such file or directory)
0.031 ( 0.017 ms): sys_move_mount/28971 move_mount(from_dfd: 6, from_pathname: 0x402055, to_dfd: 106, to_pathname: 0x402050, flags: F_SYMLINKS|F_AUTOMOUNTS|F_EMPTY_PATH|T_SYMLINKS|T_AUTOMOUNTS|T_EMPTY_PATH) = -1 ENOENT (No such file or directory)
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-83rim8g4k0s4gieieh5nnlck@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
$ tools/perf/trace/beauty/move_mount_flags.sh
static const char *move_mount_flags[] = {
[ilog2(0x00000001) + 1] = "F_SYMLINKS",
[ilog2(0x00000002) + 1] = "F_AUTOMOUNTS",
[ilog2(0x00000004) + 1] = "F_EMPTY_PATH",
[ilog2(0x00000010) + 1] = "T_SYMLINKS",
[ilog2(0x00000020) + 1] = "T_AUTOMOUNTS",
[ilog2(0x00000040) + 1] = "T_EMPTY_PATH",
};
$
Will be wired up to the 'perf trace' arg in a followup patch.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-px7v33suw1k2ehst52l7bwa3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Cut'n'paste error, the second comment is about the syscalls that have as
its second arg a string.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-zo5s6rloy42u41acsf6q3pvi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
