| Age | Commit message (Collapse) | Author |
|---|
|
Running "perf mem report" in TUI mode fails with ENOMEM message in
powerpc:
failed to process sample
Running with debug and verbose options points that issue is while
allocating memory for sample histograms.
The error path is:
symbol__inc_addr_samples() ->
__symbol__inc_addr_samples() ->
annotated_source__histogram()
symbol__inc_addr_samples() calls annotated_source__alloc_histograms ()
to allocate memory for sample histograms using calloc(). Here calloc()
fails since the size of symbol is huge. The size of a symbol is
calculated as difference between its start and end address.
Example histogram allocation that fails is:
sym->name is _end
sym->start is 0xc0000000027a0000
sym->end is 0xc008000003890000
symbol__size(sym) is 0x80000010f0000
In the above case, the difference between sym->start
(0xc0000000027a0000) and sym->end (0xc008000003890000) is huge.
This is same problem as in s390 and arm64 which are fixed in commits:
b9c0a64901d5 ("perf annotate: Fix s390 gap between kernel end and module start")
78886f3ed37e ("perf symbols: Fix arm64 gap between kernel start and module end")
When this symbol was read first, its start and end address was set to
address which matches with data from /proc/kallsyms.
After symbol__new():
symbol__new: _end 0xc0000000027a0000-0xc0000000027a0000
From /proc/kallsyms:
...
c000000002799370 b backtrace_flag
c000000002799378 B radix_tree_node_cachep
c000000002799380 B __bss_stop
c0000000027a0000 B _end
c008000003890000 t icmp_checkentry [ip_tables]
c008000003890038 t ipt_alloc_initial_table [ip_tables]
c008000003890468 T ipt_do_table [ip_tables]
c008000003890de8 T ipt_unregister_table_pre_exit [ip_tables]
...
Perf calls function symbols__fixup_end() which sets the end of symbol to
0xc008000003890000, which is the next address and this is the start
address of first module (icmp_checkentry in above) which will make the
huge symbol size of 0x80000010f0000.
After symbols__fixup_end:
symbols__fixup_end: sym->name: _end
sym->start: 0xc0000000027a0000
sym->end: 0xc008000003890000
On powerpc, kernel text segment is located at 0xc000000000000000 whereas
the modules are located at very high memory addresses,
0xc00800000xxxxxxx. Since the gap between end of kernel text segment and
beginning of first module's address is high, histogram allocation using
calloc fails.
Fix this by detecting the kernel's last symbol and limiting the range of
last kernel symbol to pagesize.
Signed-off-by: Athira Rajeev<atrajeev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-By: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1609208054-1566-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch fixes "perf inject --jit" to properly operate on
namespaced/containerized processes:
* jitdump files are generated by the process, thus they should be
looked up in its mount NS.
* DSOs of injected MMAP events will later be looked up in the process
mount NS, so write them into its NS.
* PIDs & TIDs from jitdump events need to be translated to the PID as
seen by "perf record" before written into MMAP events.
For a process in a different PID NS, the TID & PID given in the jitdump
event are actually ignored; I use the TID & PID of the thread which
mmap()ed the jitdump file. This is simplified and won't do for forks of
the initial process, if they continue using the same jitdump file.
Future patches might improve it.
This was tested by recording a NodeJS process running with
"--perf-prof", inside a Docker container, and by recording another
NodeJS process running in the same namespaces as perf itself, to make
sure it's not broken for non-containerized processes.
Signed-off-by: Yonatan Goldschmidt <yonatan.goldschmidt@granulate.io>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20201105015604.1726943-1-yonatan.goldschmidt@granulate.io
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Provides an accurate mean to determine if the owner thread is in a
different PID namespace.
Signed-off-by: Yonatan Goldschmidt <yonatan.goldschmidt@granulate.io>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20201105015418.1725218-1-yonatan.goldschmidt@granulate.io
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
events
Like in __event__synthesize_thread(), I think it's better to use
scandir() instead of the readdir() loop. In case some malicious task
continues to create new threads, the readdir() loop will run over and
over to collect tids. The scandir() also has the problem but the window
is much smaller since it doesn't do much work during the iteration.
Also add filter_task() function as we only care the tasks.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210202090118.2008551-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To synthesize information to resolve sample IPs, it needs to scan task
and mmap info from the /proc filesystem. For each process, it opens
(and reads) status and maps file respectively. But as kernel threads
don't have memory maps so we can skip the maps file.
To find kernel threads, check "VmPeak:" line in /proc/<PID>/status file.
It's about the peak virtual memory usage so only user-level tasks have
that. Note that it's possible to miss the line due to partial reads.
So we should double-check if it's a really kernel thread when there's no
VmPeak line.
Thus check "Threads:" line (which follows the VmPeak line whether or not
it exists) to be sure it's read enough data - just in case of deeply
nested pid namespaces or large number of supplementary groups are
involved.
This is for user process:
$ head -40 /proc/1/status
Name: systemd
Umask: 0000
State: S (sleeping)
Tgid: 1
Ngid: 0
Pid: 1
PPid: 0
TracerPid: 0
Uid: 0 0 0 0
Gid: 0 0 0 0
FDSize: 256
Groups:
NStgid: 1
NSpid: 1
NSpgid: 1
NSsid: 1
VmPeak: 234192 kB <-- here
VmSize: 169964 kB
VmLck: 0 kB
VmPin: 0 kB
VmHWM: 29528 kB
VmRSS: 6104 kB
RssAnon: 2756 kB
RssFile: 3348 kB
RssShmem: 0 kB
VmData: 19776 kB
VmStk: 1036 kB
VmExe: 784 kB
VmLib: 9532 kB
VmPTE: 116 kB
VmSwap: 2400 kB
HugetlbPages: 0 kB
CoreDumping: 0
THP_enabled: 1
Threads: 1 <-- and here
SigQ: 1/62808
SigPnd: 0000000000000000
ShdPnd: 0000000000000000
SigBlk: 7be3c0fe28014a03
SigIgn: 0000000000001000
And this is for kernel thread:
$ head -20 /proc/2/status
Name: kthreadd
Umask: 0000
State: S (sleeping)
Tgid: 2
Ngid: 0
Pid: 2
PPid: 0
TracerPid: 0
Uid: 0 0 0 0
Gid: 0 0 0 0
FDSize: 64
Groups:
NStgid: 2
NSpid: 2
NSpgid: 0
NSsid: 0
Threads: 1 <-- here
SigQ: 1/62808
SigPnd: 0000000000000000
ShdPnd: 0000000000000000
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210202090118.2008551-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To save memory usage, it needs to reduce the number of entries in the
proc filesystem. It's using /proc/<PID>/task directory to traverse
threads in the process and then kernel creates /proc/<PID>/task/<TID>
entries.
After that it checks the thread info using the /proc/<TID>/status file
rather than /proc/<PID>/task/<TID>/status. As far as I can see, they
are the same and contain all the info we need.
Using the latter eliminates the unnecessary /proc/<TID> entry. This can
be useful especially a large number of threads are used in the system.
In my experiment around 1KB of memory on average was saved for each
thread (which is not a thread group leader).
To do this, pass both pid and tid to perf_event_prepare_comm() if it
knows them. In case it doesn't know, passing 0 as pid will do the old
way.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210202090118.2008551-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Reduce duplication in the JSONs by referencing standard events from
armv8-common-and-microarch.json
In general the "PublicDescription" fields are not modified when somewhat
significantly worded differently than the standard.
Apart from that, description and names for events slightly different to
standard are changed (to standard) for consistency.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Nakamura, Shunsuke/中村 俊介 <nakamura.shun@fujitsu.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@openeuler.org
Link: https://lore.kernel.org/r/1611835236-34696-5-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Reduce duplication in the JSONs by referencing standard events from
armv8-common-and-microarch.json
In general the "PublicDescription" fields are not modified when somewhat
significantly worded differently than the standard.
Apart from that, description and names for events slightly different to
standard are changed (to standard) for consistency.
Note that names for events 0x34 and 0x35 are non-standard and remain
unchanged. Those events came from the following originally:
https://github.com/AmpereComputing/ampere-centos-kernel/blob/4c2479c67bbcf35b35224db12a092b33682b181c/Documentation/arm64/eMAG-ARM-CoreImpDefined.pdf
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nakamura, Shunsuke/中村 俊介 <nakamura.shun@fujitsu.com>
Cc: mathieu.poirier@linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@openeuler.org
Link: https://lore.kernel.org/r/1611835236-34696-4-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a common and microarch JSON, which can be referenced from CPU JSONs.
For now, brief and public description are as event brief event
description from the ARMv8 ARM [0], D7-11.
The list of events is not complete, as not all events will be referenced
yet.
Reference document is at the following:
[0] https://documentation-service.arm.com/static/5fa3bd1eb209f547eebd4141?token=
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Nakamura, Shunsuke/中村 俊介 <nakamura.shun@fujitsu.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@openeuler.org
Link: https://lore.kernel.org/r/1611835236-34696-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The "briefdescription" for event 0x35 has a typo - fix it.
Fixes: d35c595bf005 ("perf vendor events arm64: Revise core JSON events for eMAG")
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Nakamura, Shunsuke/中村 俊介 <nakamura.shun@fujitsu.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@openeuler.org
Link: https://lore.kernel.org/r/1611835236-34696-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Other perf tool builtins already supported a DSO filter.
For example:
$ perf report --dsos a,b,c
which only considers symbols in these dsos.
Now the DSO filter is supported in 'perf script':
root@kbl-ppc:~# ./perf script --dsos "[kernel.kallsyms]"
perf 18123 [000] 6142863.075104: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
perf 18123 [000] 6142863.075107: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
perf 18123 [000] 6142863.075108: 10 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
perf 18123 [000] 6142863.075109: 273 cycles: ffffffff9ca7730a native_write_msr+0xa ([kernel.kallsyms])
perf 18123 [000] 6142863.075110: 7684 cycles: ffffffff9ca3c9c0 native_sched_clock+0x50 ([kernel.kallsyms])
perf 18123 [000] 6142863.075112: 213017 cycles: ffffffff9d765a92 syscall_exit_to_user_mode+0x32 ([kernel.kallsyms])
perf 18123 [001] 6142863.075156: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
perf 18123 [001] 6142863.075158: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
perf 18123 [001] 6142863.075159: 17 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
Committer testing:
$ perf script
ls 2364888 29303.010949: 1 cycles:u: ffffffffa4bbc6a9 [unknown] ([unknown])
ls 2364888 29303.010957: 1 cycles:u: ffffffffa429ef48 [unknown] ([unknown])
ls 2364888 29303.010961: 1 cycles:u: ffffffffa4260133 [unknown] ([unknown])
ls 2364888 29303.010964: 5 cycles:u: ffffffffa429efad [unknown] ([unknown])
ls 2364888 29303.010967: 41 cycles:u: ffffffffa42a4586 [unknown] ([unknown])
ls 2364888 29303.010972: 435 cycles:u: ffffffffa429efe0 [unknown] ([unknown])
ls 2364888 29303.010978: 5142 cycles:u: 7f9b95bc2abf __GI___tunables_init+0x11f (/usr/lib64/ld-2.32.so)
ls 2364888 29303.011006: 38551 cycles:u: ffffffffa4290f61 [unknown] ([unknown])
ls 2364888 29303.011486: 238234 cycles:u: 7f9b95bb7741 _dl_relocate_object+0xa71 (/usr/lib64/ld-2.32.so)
ls 2364888 29303.011937: 415870 cycles:u: 7f9b95a1c80e __strcoll_l+0xe (/usr/lib64/libc-2.32.so)
$
Before:
$ perf script --dsos /usr/lib64/libc-2.32.so |& head -5
Error: unknown option `dsos'
Usage: perf script [<options>]
or: perf script [<options>] record <script> [<record-options>] <command>
or: perf script [<options>] report <script> [script-args]
$
After:
$ perf script --dsos /usr/lib64/libc-2.32.so
ls 2364888 29303.011937: 415870 cycles:u: 7f9b95a1c80e __strcoll_l+0xe (/usr/lib64/libc-2.32.so)
$
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210124232750.19170-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When we lookup an address and don't find a map we should filter that
sample if the user specified a list of --dso entries to filter on, fix
it.
Before:
$ perf script
sleep 274800 2843.556162: 1 cycles:u: ffffffffbb26bff4 [unknown] ([unknown])
sleep 274800 2843.556168: 1 cycles:u: ffffffffbb2b047d [unknown] ([unknown])
sleep 274800 2843.556171: 1 cycles:u: ffffffffbb2706b2 [unknown] ([unknown])
sleep 274800 2843.556174: 6 cycles:u: ffffffffbb2b0267 [unknown] ([unknown])
sleep 274800 2843.556176: 59 cycles:u: ffffffffbb2b03b1 [unknown] ([unknown])
sleep 274800 2843.556180: 691 cycles:u: ffffffffbb26bff4 [unknown] ([unknown])
sleep 274800 2843.556189: 9160 cycles:u: 7fa9550eeaa3 __GI___tunables_init+0xf3 (/usr/lib64/ld-2.32.so)
sleep 274800 2843.556312: 86937 cycles:u: 7fa9550e157b _dl_lookup_symbol_x+0x4b (/usr/lib64/ld-2.32.so)
$
So we have some samples we somehow didn't find in a map for, if we now
do:
$ perf report --stdio --dso /usr/lib64/ld-2.32.so
# dso: /usr/lib64/ld-2.32.so
#
# Total Lost Samples: 0
#
# Samples: 8 of event 'cycles:u'
# Event count (approx.): 96856
#
# Overhead Command Symbol
# ........ ....... ........................
#
89.76% sleep [.] _dl_lookup_symbol_x
9.46% sleep [.] __GI___tunables_init
0.71% sleep [k] 0xffffffffbb26bff4
0.06% sleep [k] 0xffffffffbb2b03b1
0.01% sleep [k] 0xffffffffbb2b0267
0.00% sleep [k] 0xffffffffbb2706b2
0.00% sleep [k] 0xffffffffbb2b047d
$
After this patch we get the right output with just entries for the DSOs
specified in --dso:
$ perf report --stdio --dso /usr/lib64/ld-2.32.so
# dso: /usr/lib64/ld-2.32.so
#
# Total Lost Samples: 0
#
# Samples: 8 of event 'cycles:u'
# Event count (approx.): 96856
#
# Overhead Command Symbol
# ........ ....... ........................
#
89.76% sleep [.] _dl_lookup_symbol_x
9.46% sleep [.] __GI___tunables_init
$
#
Fixes: 96415e4d3f5fdf9c ("perf symbols: Avoid unnecessary symbol loading when dso list is specified")
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210128131209.GD775562@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The Topdown Microarchitecture Analysis (TMA) Method is a structured
analysis methodology to identify critical performance bottlenecks in
out-of-order processors. From the Ice Lake and later platforms, the
Topdown information can be retrieved from the dedicated "metrics"
register, which isn't impacted by other events. Also, the Topdown
metrics support both per thread/process and per core measuring. Adding
Topdown metrics events as default events can enrich the default
measuring information, and would not cost any extra multiplexing.
Introduce arch_evlist__add_default_attrs() to allow architecture
specific default events. Add the Topdown metrics events in the X86
specific arch_evlist__add_default_attrs(). Other architectures can add
their own default events later separately.
With the patch:
$ perf stat sleep 1
Performance counter stats for 'sleep 1':
0.82 msec task-clock:u # 0.001 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
61 page-faults:u # 0.074 M/sec
319,941 cycles:u # 0.388 GHz
242,802 instructions:u # 0.76 insn per cycle
54,380 branches:u # 66.028 M/sec
4,043 branch-misses:u # 7.43% of all branches
1,585,555 slots:u # 1925.189 M/sec
238,941 topdown-retiring:u # 15.0% retiring
410,378 topdown-bad-spec:u # 25.8% bad speculation
634,222 topdown-fe-bound:u # 39.9% frontend bound
304,675 topdown-be-bound:u # 19.2% backend bound
1.001791625 seconds time elapsed
0.000000000 seconds user
0.001572000 seconds sys
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20210121133752.118327-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Event duration_time in a metric expression requires special handling.
Improve test coverage by including a metric whose expression includes
duration_time. The actual metric is a copied from the L1D_Cache_Fill_BW
metric on my broadwell machine.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxarm@openeuler.org
Link: http://lore.kernel.org/lkml/1611578842-5749-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When dealing with BPF/BTF/pahole and DWARF v5 I wanted to build bpftool.
While looking into the source code I found duplicate assignments in misc tools
for the LLVM eco system, e.g. clang and llvm-objcopy.
Move the Clang, LLC and/or LLVM utils definitions to tools/scripts/Makefile.include
file and add missing includes where needed. Honestly, I was inspired by the commit
c8a950d0d3b9 ("tools: Factor HOSTCC, HOSTLD, HOSTAR definitions").
I tested with bpftool and perf on Debian/testing AMD64 and LLVM/Clang v11.1.0-rc1.
Build instructions:
[ make and make-options ]
MAKE="make V=1"
MAKE_OPTS="HOSTCC=clang HOSTCXX=clang++ HOSTLD=ld.lld CC=clang LD=ld.lld LLVM=1 LLVM_IAS=1"
MAKE_OPTS="$MAKE_OPTS PAHOLE=/opt/pahole/bin/pahole"
[ clean-up ]
$MAKE $MAKE_OPTS -C tools/ clean
[ bpftool ]
$MAKE $MAKE_OPTS -C tools/bpf/bpftool/
[ perf ]
PYTHON=python3 $MAKE $MAKE_OPTS -C tools/perf/
I was careful with respecting the user's wish to override custom compiler, linker,
GNU/binutils and/or LLVM utils settings.
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com> # tools/build and tools/perf
Link: https://lore.kernel.org/bpf/20210128015117.20515-1-sedat.dilek@gmail.com
|
|
To pick up fixes.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When unpacking the event which is from dynamic PMU, the array
output[OUTPUT_TYPE_MAX] may be overrun. For example, type number of SKL
uncore_imc is 10, but OUTPUT_TYPE_MAX is 7 now (OUTPUT_TYPE_MAX =
PERF_TYPE_MAX + 1).
/* In builtin-script.c */
process_event()
{
unsigned int type = output_type(attr->type);
if (output[type].fields == 0)
return;
}
output[10] is overrun.
Create a type OUTPUT_TYPE_OTHER for dynamic PMU events, then
output_type(attr->type) will return OUTPUT_TYPE_OTHER here.
Note that if PERF_TYPE_MAX ever changed, then there would be a conflict
between old perf.data files that had a dynamicaliy allocated PMU number
that would then be the same as a fixed PERF_TYPE.
Example:
# perf record --switch-events -C 0 -e "{cpu-clock,uncore_imc/data_reads/,uncore_imc/data_writes/}:SD" -a -- sleep 1
# perf script
Before:
swapper 0 [000] 1479253.987551: 277766 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1479253.987797: 246709 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1479253.988127: 329883 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1479253.988273: 146393 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1479253.988523: 249977 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1479253.988877: 354090 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1479253.989023: 145940 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1479253.989383: 359856 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1479253.989523: 140082 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
After:
swapper 0 [000] 1397040.402011: 272384 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1397040.402011: 5396 uncore_imc/data_reads/:
swapper 0 [000] 1397040.402011: 967 uncore_imc/data_writes/:
swapper 0 [000] 1397040.402259: 249153 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1397040.402259: 7231 uncore_imc/data_reads/:
swapper 0 [000] 1397040.402259: 1297 uncore_imc/data_writes/:
swapper 0 [000] 1397040.402508: 249108 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1397040.402508: 5333 uncore_imc/data_reads/:
swapper 0 [000] 1397040.402508: 1008 uncore_imc/data_writes/:
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/r/20201209005828.21302-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Joakim reports that getting "perf stat" for multiple system PMU metrics
segfaults:
$ perf stat -a -I 1000 -M imx8mm_ddr_write.all,imx8mm_ddr_write.all
Segmentation fault
$
While the same works without issue for a single metric.
The logic in metricgroup__add_metric_sys_event_iter() is broken, in that
add_metric() @m argument should be NULL for each new metric. Fix by not
passing a holder for that, and rather make local in
metricgroup__add_metric_sys_event_iter().
Fixes: be335ec28efa ("perf metricgroup: Support adding metrics for system PMUs")
Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxarm@openeuler.org
Link: https://lore.kernel.org/r/1611050655-44020-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Metrics containing duration_time cause a segfault:
$ perf stat -v -M L1D_Cache_Fill_BW sleep 1
Using CPUID GenuineIntel-6-3D-4
metric expr 64 * l1d.replacement / 1000000000 / duration_time for L1D_Cache_Fill_BW
found event duration_time
found event l1d.replacement
adding {l1d.replacement}:W,duration_time
l1d.replacement -> cpu/umask=0x1,(null)=0x1e8483,event=0x51/
Segmentation fault
$
In commit c2337d67199a1ea1 ("perf metricgroup: Fix metrics using aliases
covering multiple PMUs"), the logic in find_evsel_group() when iter'ing
events was changed to not only select events in same group, but also for
aliased PMUs.
Checking whether events were for aliased PMUs was done by comparing the
event PMU name. This was not safe for duration_time event, which has no
associated PMU (and no PMU name), so fix by checking if the event PMU name
is set also.
Committer testing:
Reproduced the bug, then, on a:
$ grep -m1 ^'model name' /proc/cpuinfo
model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
$
We now get:
$ perf stat -M L1D_Cache_Fill_BW sleep 1
Performance counter stats for 'sleep 1':
4,141 l1d.replacement:u
1,001,285,107 ns duration_time:u
1.001285107 seconds time elapsed
0.000000000 seconds user
0.001119000 seconds sys
$
Detais from -v:
Using CPUID GenuineIntel-6-8E-A
metric expr 64 * l1d.replacement / 1000000000 / duration_time for L1D_Cache_Fill_BW
found event duration_time
found event l1d.replacement
adding {l1d.replacement}:W,duration_time
l1d.replacement -> cpu/(null)=0x1e8483,umask=0x1,event=0x51/
Control descriptor is not initialized
Warning:
kernel.perf_event_paranoid=2, trying to fall back to excluding kernel and hypervisor samples
Warning:
kernel.perf_event_paranoid=2, trying to fall back to excluding kernel and hypervisor samples
l1d.replacement:u: 4592 612201 612201
duration_time:u: 1001478621 1001478621 1001478621
Fixes: c2337d67199a1ea1 ("perf metricgroup: Fix metrics using aliases covering multiple PMUs")
Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxarm@openeuler.org
Link: https://lore.kernel.org/r/1611159518-226883-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up fixes.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a control 'ping' command to detect if perf is up and its control
interface is operational.
It will be used in following daemon patches to synchronize with record
session - when control interface is up and running, we know that perf
record is monitoring and ready to receive signals.
Example session:
terminal 1:
# mkfifo control ack
# perf record --control=fifo:control,ack
terminal 2:
# echo ping > control
# cat ack
ack
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201226232038.390883-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding control 'stop' command to stop perf record.
When it is received, perf will set the 'done' variable to 1 to stop its
mmap ring buffer reading loop.
Example session:
terminal 1:
# mkfifo control ack
# perf record --control=fifo:control,ack
terminal 2:
# echo stop > control
terminal 1:
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 3.214 MB perf.data (38280 samples) ]
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201226232038.390883-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a new 'evlist' control command to display all the evlist events.
When it is received, perf will scan and print current evlist into perf
record terminal.
The interface string for control file is:
evlist [-v|-g|-F]
The syntax follows perf evlist command:
-F Show just the sample frequency used for each event.
-v Show all fields.
-g Show event group information.
Example session:
terminal 1:
# mkfifo control ack
# perf record --control=fifo:control,ack -e '{cycles,instructions}'
terminal 2:
# echo evlist > control
terminal 1:
cycles
instructions
dummy:HG
terminal 2:
# echo 'evlist -v' > control
terminal 1:
cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: \
IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1, \
sample_id_all: 1, exclude_guest: 1
instructions: size: 120, config: 0x1, { sample_period, sample_freq }: 4000, \
sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, inherit: 1, freq: 1, \
sample_id_all: 1, exclude_guest: 1
dummy:HG: type: 1, size: 120, config: 0x9, { sample_period, sample_freq }: 4000, \
sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, inherit: 1, mmap: 1, \
comm: 1, freq: 1, task: 1, sample_id_all: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, \
bpf_event: 1
terminal 2:
# echo 'evlist -g' > control
terminal 1:
{cycles,instructions}
dummy:HG
terminal 2:
# echo 'evlist -F' > control
terminal 1:
cycles: sample_freq=4000
instructions: sample_freq=4000
dummy:HG: sample_freq=4000
This new evlist command is handy to get real event names when
wildcards are used.
Adding evsel_fprintf.c object to python/perf.so build, because
it's now evlist.c dependency.
Adding PYTHON_PERF define for python/perf.so compilation, so we
can use it to compile in only evsel__fprintf from evsel_fprintf.c
object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201226232038.390883-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding new control events to enable/disable specific event.
The interface string for control file are:
'enable <EVENT NAME>'
'disable <EVENT NAME>'
when received the command, perf will scan the current evlist
for <EVENT NAME> and if found it's enabled/disabled.
Example session:
terminal 1:
# mkfifo control ack perf.pipe
# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:*' -o - > perf.pipe
terminal 2:
# cat perf.pipe | perf --no-pager script -i -
terminal 1:
Events disabled
NOTE Above message will show only after read side of the pipe ('>')
is started on 'terminal 2'. The 'terminal 1's bash does not execute
perf before that, hence the delyaed perf record message.
terminal 3:
# echo 'enable sched:sched_process_fork' > control
terminal 1:
event sched:sched_process_fork enabled
terminal 2:
bash 33349 [034] 149587.674295: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34056
bash 33349 [034] 149588.239521: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34057
terminal 3:
# echo 'enable sched:sched_wakeup_new' > control
terminal 1:
event sched:sched_wakeup_new enabled
terminal 2:
bash 33349 [034] 149632.228023: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34059
bash 33349 [034] 149632.228050: sched:sched_wakeup_new: bash:34059 [120] success=1 CPU:036
bash 33349 [034] 149633.950005: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34060
bash 33349 [034] 149633.950030: sched:sched_wakeup_new: bash:34060 [120] success=1 CPU:036
Committer testing:
If I use 'sched:*' and then enable all events, I can't get 'perf record'
to react to further commands, so I tested it with:
[root@five ~]# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:sched_process_*' -o - > perf.pipe
Events disabled
Events enabled
Events disabled
And then it works as expected, so we need to fix this pre-existing
problem.
Another issue, we need to check if a event is already enabled or
disabled and change the message to be clearer, i.e.:
[root@five ~]# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:sched_process_*' -o - > perf.pipe
Events disabled
If we receive a 'disable' command, then it should say:
[root@five ~]# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:sched_process_*' -o - > perf.pipe
Events disabled
Events already disabled
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201226232038.390883-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Make perf_config_global global, it will be used outside the config.c
object in the following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210102220441.794923-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Make perf_config_system global, it will be used outside the config.c
object in the following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210102220441.794923-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Factor out the perf_home_perfconfig, that looks for .perfconfig in home
directory including check for PERF_CONFIG_NOGLOBAL and for proper
permission.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210102220441.794923-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Allow to display time in perf debug output via new
debug_set_display_time function.
It will be used in perf daemon command to get verbose output into log
file.
The debug time format is:
[2020-12-03 18:25:31.822152] affinity: SYS
[2020-12-03 18:25:31.822164] mmap flush: 1
[2020-12-03 18:25:31.822175] comp level: 0
[2020-12-03 18:25:32.002047] mmap size 528384B
Committer notes:
Cast tod.tv_usec to long to avoid this problem:
78 12.70 ubuntu:18.04-x-sparc64 : FAIL sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
util/debug.c: In function 'fprintf_time':
util/debug.c:63:32: error: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type '__suseconds_t {aka int}' [-Werror=format=]
return fprintf(file, "[%s.%06lu] ", date, tod.tv_usec);
~~~~^ ~~~~~~~~~~~
%06u
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210102220441.794923-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add interface to load config set from custom file by using
perf_config_set__load_file function.
It will be used in perf daemon command to process custom config file.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210102220441.794923-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It's not used outside config.c object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210102220441.794923-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Extend sample-parsing test cases to support new sample type
PERF_SAMPLE_CODE_PAGE_SIZE.
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210105195752.43489-7-kan.liang@linux.intel.com
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a new sort dimension "code_page_size" for common sort.
With this option applied, perf can sort and report by sample's code page
size.
For example:
# perf report --stdio --sort=comm,symbol,code_page_size
# To display the perf.data header info, please use
# --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 3K of event 'mem-loads:uP'
# Event count (approx.): 1470769
#
# Overhead Command Symbol Code Page Size IPC [IPC Coverage]
# ........ ....... ............................ .............. ....................
#
69.56% dtlb [.] GetTickCount 4K - -
17.93% dtlb [.] Calibrate 4K - -
11.40% dtlb [.] __gettimeofday 4K - -
#
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210105195752.43489-6-kan.liang@linux.intel.com
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Display sampled code page sizes when PERF_SAMPLE_CODE_PAGE_SIZE was set.
For example:
# perf script --fields comm,event,ip,code_page_size
dtlb mem-loads:uP: 445777 4K
dtlb mem-loads:uP: 40f724 4K
dtlb mem-loads:uP: 474926 4K
dtlb mem-loads:uP: 401075 4K
dtlb mem-loads:uP: 401095 4K
dtlb mem-loads:uP: 401095 4K
dtlb mem-loads:uP: 4010cc 4K
dtlb mem-loads:uP: 440b6f 4K
#
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210105195752.43489-5-kan.liang@linux.intel.com
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adds the infrastructure to sample the code address page size.
Introduce a new --code-page-size option for perf record.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Originally-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210105195752.43489-4-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add option --data-page-size in "perf mem" to record/report data page
size.
Here are some examples:
# perf mem --phys-data --data-page-size report -D
# PID, TID, IP, ADDR, PHYS ADDR, DATA PAGE SIZE, LOCAL WEIGHT, DSRC, SYMBOL
20134 20134 0xffffffffb5bd2fd0 0x016ffff9a274e96a308 0x000000044e96a308 4K 1168 0x5080144 /lib/modules/4.18.0-rc7+/build/vmlinux:perf_ctx_unlock
20134 20134 0xffffffffb63f645c 0xffffffffb752b814 0xcfb52b814 2M 225 0x26a100142 /lib/modules/4.18.0-rc7+/build/vmlinux:_raw_spin_lock
20134 20134 0xffffffffb660300c 0xfffffe00016b8bb0 0x0 4K 0 0x5080144 /lib/modules/4.18.0-rc7+/build/vmlinux:__x86_indirect_thunk_rax
#
# perf mem --phys-data --data-page-size report --stdio
# To display the perf.data header info, please use
# --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 5K of event 'cpu/mem-loads,ldlat=30/P'
# Total weight : 281234
# Sort order :
# mem,sym,dso,symbol_daddr,dso_daddr,tlb,locked,phys_daddr,data_page_size
#
# Overhead Samples Memory access Symbol Shared Object Data Symbol Data Object TLB access Locked Data Physical Address Data Page Size
# ........ ....... ............. ............................ ................ ...................... ........... ............ ...... ...................... ..............
28.54% 1826 L1 or L1 hit [k] __x86_indirect_thunk_rax [kernel.vmlinux] [k] 0xffffb0df31b0ff28 [unknown] L1 or L2 hit No [k] 0x0000000000000000 4K
6.02% 256 L1 or L1 hit [.] touch_buffer dtlb [.] 0x00007ffd50109da8 [stack] L1 or L2 hit No [.] 0x000000042454ada8 4K
3.23% 5 L1 or L1 hit [k] clear_huge_page [kernel.vmlinux] [k] 0xffff9a2753b8ce60 [unknown] L1 or L2 hit No [k] 0x0000000453b8ce60 2M
2.98% 4 L1 or L1 hit [k] clear_page_erms [kernel.vmlinux] [k] 0xffffb0df31b0fd00 [unknown] L1 or L2 hit No [k] 0x0000000000000000 4K
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210105195752.43489-3-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now, "--phys-data" is the only option which impacts the output format.
A simple "if else" is enough to handle the option. But there will be
more options added, e.g. "--data-page-size", which also impact the
output format. The code will become too complex to be maintained.
Divide the big printf into several small pieces. Output the specific
piece only if the related option is applied.
No functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210105195752.43489-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Replace the OCSD_INSTR switch statement with an if to fix compilation
error about unhandled values and avoid this issue again in the future.
Add new OCSD_GEN_TRC_ELEM_SYNC_MARKER and OCSD_GEN_TRC_ELEM_MEMTRANS
enum values to fix unhandled value compilation error. Currently they are
ignored.
Increase the minimum version number to v1.0.0 now that new enum values
are used that are only present in this version.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210108142752.27872-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch adds several local variables:
"cl_output": pointer for outputting single cache line metrics;
"output_str": pointer for outputting cache line metrics;
"sort_str": pointer to the sorting metrics.
This can improve readability for the code and it's more flexible when
later extend to different strings for the output metrics.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210114154646.209024-7-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The macro DISPLAY_HITM() is used to calculate HITM percentage introduced
by every node and it's shown for the node info.
This patch introduces the static function display_metrics() to replace
the macro, and the parameters are refined for passing the metric's
statistic and sum value.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210114154646.209024-6-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For percent() its arguments are defined as integers; this is not
consistent with its consumers which pass u32 arguments.
Thus this patch makes argument type as u32 for percent().
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210114154646.209024-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When sorting on the respective metrics (lcl_hitm, rmt_hitm, tot_hitm),
the FILTER_HITM macro is used to filter out the cache line entries if
its overhead is less than 1%.
This patch introduces a static function filter_display() to replace that
macro and refines its parameters with a more flexible way, rather than
passing field name, it changes to pass the cache line's statistic and
sum value.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210114154646.209024-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch has no functionality changes but refactors hist entry
validation for cache line resorting.
It renames function "valid_hitm_or_store()" to "is_valid_hist_entry()",
changes return type from integer type to bool type. In the function,
it uses switch-case instead of ternary operators, which is easier
to extend for more display types.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210114154646.209024-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For shared cache line statistics, 'perf c2c' relies on HITM. We can use
more general naming rather than only binding to HITM, so replace
"hitm_stats" with "shared_clines_stats" in structure perf_c2c, and
rename function resort_hitm_cb() to resort_shared_cl_cb().
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20210114154646.209024-2-leo.yan@linaro.org
|
|
Introduce 'perf stat -b' option, which counts events for BPF programs, like:
[root@localhost ~]# ~/perf stat -e ref-cycles,cycles -b 254 -I 1000
1.487903822 115,200 ref-cycles
1.487903822 86,012 cycles
2.489147029 80,560 ref-cycles
2.489147029 73,784 cycles
3.490341825 60,720 ref-cycles
3.490341825 37,797 cycles
4.491540887 37,120 ref-cycles
4.491540887 31,963 cycles
The example above counts 'cycles' and 'ref-cycles' of BPF program of id
254. This is similar to bpftool-prog-profile command, but more
flexible.
'perf stat -b' creates per-cpu perf_event and loads fentry/fexit BPF
programs (monitor-progs) to the target BPF program (target-prog). The
monitor-progs read perf_event before and after the target-prog, and
aggregate the difference in a BPF map. Then the user space reads data
from these maps.
A new 'struct bpf_counter' is introduced to provide a common interface
that uses BPF programs/maps to count perf events.
Committer notes:
Removed all but bpf_counter.h includes from evsel.h, not needed at all.
Also BPF map lookups for PERCPU_ARRAYs need to have as its value receive
buffer passed to the kernel libbpf_num_possible_cpus() entries, not
evsel__nr_cpus(evsel), as the former uses
/sys/devices/system/cpu/possible while the later uses
/sys/devices/system/cpu/online, which may be less than the 'possible'
number making the bpf map lookup overwrite memory and cause hard to
debug memory corruption.
We need to continue using evsel__nr_cpus(evsel) when accessing the
perf_counts array tho, not to overwrite another are of memory :-)
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/lkml/20210120163031.GU12699@kernel.org/
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Link: http://lore.kernel.org/lkml/20201229214214.3413833-4-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When 'perf inject' reads a perf.data file from an older version of perf,
it writes event attributes into the output with the original size field,
but lays them out as if they had the size currently used. Readers see a
corrupt file. Update the size field to match the layout.
Signed-off-by: Al Grant <al.grant@foss.arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20201124195818.30603-1-al.grant@arm.com
Signed-off-by: Denis Nikitin <denik@chromium.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In some cases, the number of cpus (nr_cpus_online) is confused with the
maximum cpu number (nr_cpus_avail), which results in the error in the
example below:
Example on system with 8 cpus:
Before:
# echo 0 > /sys/devices/system/cpu/cpu2/online
# ./perf record --kcore -e intel_pt// taskset --cpu-list 7 uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.147 MB perf.data ]
# ./perf script --itrace=e
Requested CPU 7 too large. Consider raising MAX_NR_CPUS
0x25908 [0x8]: failed to process type: 68 [Invalid argument]
After:
# ./perf script --itrace=e
#
Fixes: 8c7274691f0d ("perf machine: Replace MAX_NR_CPUS with perf_env::nr_cpus_online")
Fixes: 7df4e36a4785 ("perf session: Replace MAX_NR_CPUS with perf_env::nr_cpus_online")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210107174159.24897-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As of now it doesn't consider cgroups when collecting shadow stats and
metrics so counter values from different cgroups will be saved in a same
slot. This resulted in incorrect numbers when those cgroups have
different workloads.
For example, let's look at the scenario below: cgroups A and C runs same
workload which burns a cpu while cgroup B runs a light workload.
$ perf stat -a -e cycles,instructions --for-each-cgroup A,B,C sleep 1
Performance counter stats for 'system wide':
3,958,116,522 cycles A
6,722,650,929 instructions A # 2.53 insn per cycle
1,132,741 cycles B
571,743 instructions B # 0.00 insn per cycle
4,007,799,935 cycles C
6,793,181,523 instructions C # 2.56 insn per cycle
1.001050869 seconds time elapsed
When I run 'perf stat' with single workload, it usually shows IPC around
1.7. We can verify it (6,722,650,929.0 / 3,958,116,522 = 1.698) for cgroup A.
But in this case, since cgroups are ignored, cycles are averaged so it
used the lower value for IPC calculation and resulted in around 2.5.
avg cycle: (3958116522 + 1132741 + 4007799935) / 3 = 2655683066
IPC (A) : 6722650929 / 2655683066 = 2.531
IPC (B) : 571743 / 2655683066 = 0.0002
IPC (C) : 6793181523 / 2655683066 = 2.557
We can simply compare cgroup pointers in the evsel and it'll be NULL
when cgroups are not specified. With this patch, I can see correct
numbers like below:
$ perf stat -a -e cycles,instructions --for-each-cgroup A,B,C sleep 1
Performance counter stats for 'system wide':
4,171,051,687 cycles A
7,219,793,922 instructions A # 1.73 insn per cycle
1,051,189 cycles B
583,102 instructions B # 0.55 insn per cycle
4,171,124,710 cycles C
7,192,944,580 instructions C # 1.72 insn per cycle
1.007909814 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210115071139.257042-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pass more info to the saved_value in the runtime_stat, add a new
struct runtime_stat_data. Currently it only has 'ctx' field but later
patch will add more.
Note that we intentionally pass 0 as ctx to clock-related events for
compatibility. It was already there in a few places. So move the code
into the saved_value_lookup() explicitly and add a comment.
Suggested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210115071139.257042-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It was using some bash-specific features and failed to parse when
running with a different shell like below:
root@kbl-ppc:~/kbl-ws/perf-dev/lck-9077/acme.tmp/tools/perf# ./perf test 83 -vv
83: perf stat metrics (shadow stat) test :
--- start ---
test child forked, pid 3922
./tests/shell/stat+shadow_stat.sh: 19: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 24: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 30: ./tests/shell/stat+shadow_stat.sh: [[: not found
(standard_in) 2: syntax error
./tests/shell/stat+shadow_stat.sh: 36: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 19: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 24: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 30: ./tests/shell/stat+shadow_stat.sh: [[: not found
(standard_in) 2: syntax error
./tests/shell/stat+shadow_stat.sh: 36: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 45: ./tests/shell/stat+shadow_stat.sh: declare: not found
test child finished with -1
---- end ----
perf stat metrics (shadow stat) test: FAILED!
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Laight <david.laight@aculab.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210114050609.1258820-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It was looking at bpf/bpf.h, which caused this problem:
# perf trace -e tools/perf/examples/bpf/5sec.c
/home/acme/git/perf/tools/perf/examples/bpf/5sec.c:42:10: fatal error: 'bpf/bpf.h' file not found
#include <bpf/bpf.h>
^~~~~~~~~~~
1 error generated.
ERROR: unable to compile tools/perf/examples/bpf/5sec.c
Hint: Check error message shown above.
Hint: You can also pre-compile it into .o using:
clang -target bpf -O2 -c tools/perf/examples/bpf/5sec.c
with proper -I and -D options.
event syntax error: 'tools/perf/examples/bpf/5sec.c'
\___ Failed to load tools/perf/examples/bpf/5sec.c from source: Error when compiling BPF scriptlet
#
Change that to plain bpf.h, to make it work again:
# perf trace -e tools/perf/examples/bpf/5sec.c sleep 5s
0.000 perf_bpf_probe:hrtimer_nanosleep(__probe_ip: -1776891872, rqtp: 5000000000)
# perf trace -e tools/perf/examples/bpf/5sec.c/max-stack=16/ sleep 5s
0.000 perf_bpf_probe:hrtimer_nanosleep(__probe_ip: -1776891872, rqtp: 5000000000)
hrtimer_nanosleep ([kernel.kallsyms])
common_nsleep ([kernel.kallsyms])
__x64_sys_clock_nanosleep ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__clock_nanosleep_2 (/usr/lib64/libc-2.32.so)
# perf trace -e tools/perf/examples/bpf/5sec.c sleep 4s
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
