| Age | Commit message (Collapse) | Author |
|---|
|
The print would run only if metric_only is not set, but it's already in a
block that says it's in metric_only case. And there's no place to change
the setting.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-14-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Instead of using magic values, define symbolic constants and use them.
Also add aggr_header_std[] array to simplify aggr_mode handling.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-13-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This logic does not print the time directly, but it just puts the
timestamp in the buffer as a prefix. To reduce the confusion, factor
out the code into a separate function.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The print_metric_headers() shows metric headers a little bit for each
mode. Split it out to make the code clearer.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We don't know how long cgroup name is, but at least we can align short
ones like below.
$ perf stat -a --for-each-cgroup system.slice,user.slice true
Performance counter stats for 'system wide':
0.13 msec cpu-clock system.slice # 0.010 CPUs utilized
4 context-switches system.slice # 31.989 K/sec
1 cpu-migrations system.slice # 7.997 K/sec
0 page-faults system.slice # 0.000 /sec
450,673 cycles system.slice # 3.604 GHz (92.41%)
161,216 instructions system.slice # 0.36 insn per cycle (92.41%)
32,678 branches system.slice # 261.332 M/sec (92.41%)
2,628 branch-misses system.slice # 8.04% of all branches (92.41%)
14.29 msec cpu-clock user.slice # 1.163 CPUs utilized
35 context-switches user.slice # 2.449 K/sec
12 cpu-migrations user.slice # 839.691 /sec
57 page-faults user.slice # 3.989 K/sec
49,683,026 cycles user.slice # 3.477 GHz (99.38%)
110,790,266 instructions user.slice # 2.23 insn per cycle (99.38%)
24,552,255 branches user.slice # 1.718 G/sec (99.38%)
127,779 branch-misses user.slice # 0.52% of all branches (99.38%)
0.012289431 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Unfortunately, event running time, percentage and noise data are printed
in different positions in normal output than CSV/JSON. I think it's
better to put such details in where it actually prints.
So add before_metric argument to print_noise() and print_running() and
call them twice before and after the metric.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In the printout() function, it checks if the event is bad (i.e. not
counted or not supported) and print the result. But it does the same
what abs_printout() is doing. So add an argument to indicate the value
is ok or not and use the same function in both cases.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
And split it for each output mode like others. I believe it makes the
code simpler and more intuitive. Now abs_printout() becomes just to
call sub-functions.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The aggr_printout() function is to print aggr_id and count (nr).
Split it for each output mode to simplify the code.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Likewise, split print_cgroup() for each output mode.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Likewise, split print_noise_pct() for each output mode. Although it's
a tiny function, more logic will be added soon so it'd be better split
it and treat it in the same way.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To make the code more obvious and hopefully simpler, factor out the
code for each output mode - stdio, CSV, JSON.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Previously print_pmu_events() would compute the values to be printed,
place them in struct sevent, sort them and then print them.
Modify the code so that struct sevent holds just the PMU and event, sort
these and then in the main print loop calculate aliases for names, etc.
This avoids memory allocations for copied values as they are computed
then printed.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xin Gao <gaoxin@cdjrlc.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: http://lore.kernel.org/lkml/20221114210723.2749751-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The current code computes an array of symbol names then sorts and prints
them. Use a strlist to create a list of names that is sorted and then
print it.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xin Gao <gaoxin@cdjrlc.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: http://lore.kernel.org/lkml/20221114210723.2749751-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The current code computes an array of cache names then sorts and prints
them. Use a strlist to create a list of names that is sorted. Keep the
hybrid names, it is unclear how to generalize it, but drop the
computation of evt_pmus that is never used.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xin Gao <gaoxin@cdjrlc.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: http://lore.kernel.org/lkml/20221114210723.2749751-7-irogers@google.com
[ Fixed up clash with cf9f67b36303de65 ("perf print-events: Remove redundant comparison with zero")]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Deprecate the --cputype option and add a --unit option where '--unit
cpu_atom' behaves like '--cputype atom'. The --unit option can be used
with arbitrary PMUs, for example:
```
$ perf list --unit msr pmu
List of pre-defined events (to be used in -e or -M):
msr/aperf/ [Kernel PMU event]
msr/cpu_thermal_margin/ [Kernel PMU event]
msr/mperf/ [Kernel PMU event]
msr/pperf/ [Kernel PMU event]
msr/smi/ [Kernel PMU event]
msr/tsc/ [Kernel PMU event]
```
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xin Gao <gaoxin@cdjrlc.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: http://lore.kernel.org/lkml/20221114210723.2749751-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In print_tracepoint_events() use tracing_events__scandir_alphasort() and
scandir alphasort so that the subsystem and events are sorted and don't
need a secondary qsort. Locally this results in the following change:
...
ext4:ext4_zero_range [Tracepoint event]
- fib6:fib6_table_lookup [Tracepoint event]
fib:fib_table_lookup [Tracepoint event]
+ fib6:fib6_table_lookup [Tracepoint event]
filelock:break_lease_block [Tracepoint event]
...
ie fib6 now is after fib and not before it. This is more consistent
with how numbers are more generally sorted, such as:
...
syscalls:sys_enter_renameat [Tracepoint event]
syscalls:sys_enter_renameat2 [Tracepoint event]
...
and so an improvement over the qsort approach.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xin Gao <gaoxin@cdjrlc.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: http://lore.kernel.org/lkml/20221114210723.2749751-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add documentation to 'struct perf_pmu' and the associated structs of
'perf_pmu_alias' and 'perf_pmu_format'.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xin Gao <gaoxin@cdjrlc.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: http://lore.kernel.org/lkml/20221114210723.2749751-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Replace usage with perf_pmu__is_hybrid().
Suggested-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xin Gao <gaoxin@cdjrlc.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: http://lore.kernel.org/lkml/20221114210723.2749751-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It should have a comma after 'cpus' for socket and die aggregation mode.
The output of the following command shows the issue.
$ sudo perf stat -a --per-socket -x, --metric-only -I1 true
Before:
+--- here
V
time,socket,cpusGhz,insn per cycle,branch-misses of all branches,
0.000908461,S0,8,0.950,1.65,1.21,
After:
time,socket,cpus,GHz,insn per cycle,branch-misses of all branches,
0.000683094,S0,8,0.593,2.00,0.60,
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221112032244.1077370-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It should not print "summary" for each event when --metric-only is set.
Before:
$ sudo perf stat -a --per-socket --summary -x, --metric-only true
time,socket,cpusGhz,insn per cycle,branch-misses of all branches,
0.000709079,S0,8,0.893,2.40,0.45,
S0,8, summary, summary, summary, summary, summary,0.893, summary,2.40, summary, summary,0.45,
After:
$ sudo perf stat -a --per-socket --summary -x, --metric-only true
time,socket,cpusGHz,insn per cycle,branch-misses of all branches,
0.000882297,S0,8,0.598,1.64,0.64,
summary,S0,8,0.598,1.64,0.64,
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221112032244.1077370-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up fixes that went thru perf/urgent.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The pm variable holds an appropriate function to print metrics for CSV
anf JSON already. So we can combine the if statement to simplify the
code a little bit. This also matches to the above condition for non-CSV
and non-JSON case.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221107213314.3239159-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The num_print_interval and config->interval_clear should be checked
together like other places like later in the function. Otherwise,
the --interval-clear option could print the headers for the CSV or
JSON output unnecessarily.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221107213314.3239159-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It missed to print a matching header line for intervals.
Before:
# perf stat -a -e cycles,instructions --metric-only -j -I 500
{"unit" : "insn per cycle"}
{"interval" : 0.500544283}{"metric-value" : "1.96"}
^C
After:
# perf stat -a -e cycles,instructions --metric-only -j -I 500
{"unit" : "sec"}{"unit" : "insn per cycle"}
{"interval" : 0.500515681}{"metric-value" : "2.31"}
^C
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221107213314.3239159-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently --metric-only with --json indents header lines. This is not
needed for JSON.
$ perf stat -aA --metric-only -j true
{"unit" : "GHz"}{"unit" : "insn per cycle"}{"unit" : "branch-misses of all branches"}
{"cpu" : "0", {"metric-value" : "0.101"}{"metric-value" : "0.86"}{"metric-value" : "1.91"}
{"cpu" : "1", {"metric-value" : "0.102"}{"metric-value" : "0.87"}{"metric-value" : "2.02"}
{"cpu" : "2", {"metric-value" : "0.085"}{"metric-value" : "1.02"}{"metric-value" : "1.69"}
...
Note that the other lines are broken JSON, but it will be handled later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221107213314.3239159-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently it prints all metric headers for JSON output. But actually it
skips some metrics with valid_only_metric(). So the output looks like:
$ perf stat --metric-only --json true
{"unit" : "CPUs utilized", "unit" : "/sec", "unit" : "/sec", "unit" : "/sec", "unit" : "GHz", "unit" : "insn per cycle", "unit" : "/sec", "unit" : "branch-misses of all branches"}
{"metric-value" : "3.861"}{"metric-value" : "0.79"}{"metric-value" : "3.04"}
As you can see there are 8 units in the header but only 3 metric-values
are there. It should skip the unused headers as well. Also each unit
should be printed as a separate object like metric values.
With this patch:
$ perf stat --metric-only --json true
{"unit" : "GHz"}{"unit" : "insn per cycle"}{"unit" : "branch-misses of all branches"}
{"metric-value" : "4.166"}{"metric-value" : "0.73"}{"metric-value" : "2.96"}
Fixes: df936cadfb58ba93 ("perf stat: Add JSON output option")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Claire Jensen <cjense@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221107213314.3239159-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The struct perf_stat_output_ctx is set in a loop with the same values.
Move the code out of the loop and keep the loop minimal.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221107213314.3239159-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The --interval-clear option makes perf stat to clear the terminal at
each interval. But it doesn't need to clear the screen when it saves
to a file.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221107213314.3239159-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When perf stat is called with very detailed events, the output doesn't
align well like below:
$ sudo perf stat -a -ddd sleep 1
Performance counter stats for 'system wide':
8,020.23 msec cpu-clock # 7.997 CPUs utilized
3,970 context-switches # 494.998 /sec
169 cpu-migrations # 21.072 /sec
586 page-faults # 73.065 /sec
649,568,060 cycles # 0.081 GHz (30.42%)
304,044,345 instructions # 0.47 insn per cycle (38.40%)
60,313,022 branches # 7.520 M/sec (38.89%)
2,766,919 branch-misses # 4.59% of all branches (39.26%)
74,422,951 L1-dcache-loads # 9.279 M/sec (39.39%)
8,025,568 L1-dcache-load-misses # 10.78% of all L1-dcache accesses (39.22%)
3,314,995 LLC-loads # 413.329 K/sec (30.83%)
1,225,619 LLC-load-misses # 36.97% of all LL-cache accesses (30.45%)
<not supported> L1-icache-loads
20,420,493 L1-icache-load-misses # 0.00% of all L1-icache accesses (30.29%)
58,017,947 dTLB-loads # 7.234 M/sec (30.37%)
704,677 dTLB-load-misses # 1.21% of all dTLB cache accesses (30.27%)
234,225 iTLB-loads # 29.204 K/sec (30.29%)
417,166 iTLB-load-misses # 178.10% of all iTLB cache accesses (30.32%)
<not supported> L1-dcache-prefetches
<not supported> L1-dcache-prefetch-misses
1.002947355 seconds time elapsed
Increase the METRIC_LEN by 3 so that it can align properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221107213314.3239159-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A fix for the LLVM compilation error while building bpftool.
Replaces the expression:
_Static_assert((p) == NULL || ...)
by expression:
_Static_assert((__builtin_constant_p((p)) ? (p) == NULL : 0) || ...)
When "p" is not a constant the former is not considered to be a
constant expression by LLVM 14.
The error was introduced in the following patch-set: [1].
The error was reported here: [2].
[1] https://lore.kernel.org/bpf/20221109142611.879983-1-eddyz87@gmail.com/
[2] https://lore.kernel.org/all/202211110355.BcGcbZxP-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Fixes: c302378bc157 ("libbpf: Hashmap interface update to allow both long and void* keys/values")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221110223240.1350810-1-eddyz87@gmail.com
|
|
Since variable npmus is unsigned int, comparing with 0 is unnecessary.
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221105135932.81612-1-tegongkang@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When converting recorded data into JSON format, perf data omits probe
variables. Add them to the output in the format "field name": "field value"
using tep_print_field:
$ perf data convert --to-json output.json
// output.json
{
"linux-perf-json-version": 1,
"headers": { ... },
"samples": [
{
"timestamp": 29182079082999,
"pid": 309194,
[...]
"__probe_ip": "0x93ee35",
"query_string_string": "select 2;",
"nxids": "0"
}
]
}
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221109103932.65675-1-9erthalion6@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
An update for libbpf's hashmap interface from void* -> void* to a
polymorphic one, allowing both long and void* keys and values.
This simplifies many use cases in libbpf as hashmaps there are mostly
integer to integer.
Perf copies hashmap implementation from libbpf and has to be
updated as well.
Changes to libbpf, selftests/bpf and perf are packed as a single
commit to avoid compilation issues with any future bisect.
Polymorphic interface is acheived by hiding hashmap interface
functions behind auxiliary macros that take care of necessary
type casts, for example:
#define hashmap_cast_ptr(p) \
({ \
_Static_assert((p) == NULL || sizeof(*(p)) == sizeof(long),\
#p " pointee should be a long-sized integer or a pointer"); \
(long *)(p); \
})
bool hashmap_find(const struct hashmap *map, long key, long *value);
#define hashmap__find(map, key, value) \
hashmap_find((map), (long)(key), hashmap_cast_ptr(value))
- hashmap__find macro casts key and value parameters to long
and long* respectively
- hashmap_cast_ptr ensures that value pointer points to a memory
of appropriate size.
This hack was suggested by Andrii Nakryiko in [1].
This is a follow up for [2].
[1] https://lore.kernel.org/bpf/CAEf4BzZ8KFneEJxFAaNCCFPGqp20hSpS2aCj76uRk3-qZUH5xg@mail.gmail.com/
[2] https://lore.kernel.org/bpf/af1facf9-7bc8-8a3d-0db4-7b3f333589a2@meta.com/T/#m65b28f1d6d969fcd318b556db6a3ad499a42607d
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221109142611.879983-2-eddyz87@gmail.com
|
|
DWARF version 5 standard Sec 2.14 says that
Any debugging information entry representing the declaration of an object,
module, subprogram or type may have DW_AT_decl_file, DW_AT_decl_line and
DW_AT_decl_column attributes, each of whose value is an unsigned integer
constant.
So it should be an unsigned integer data. Also, even though the standard
doesn't clearly say the DW_AT_call_file is signed or unsigned, the
elfutils (eu-readelf) interprets it as unsigned integer data and it is
natural to handle it as unsigned integer data as same as DW_AT_decl_file.
This changes the DW_AT_call_file as unsigned integer data too.
Fixes: 3f4460a28fb2f73d ("perf probe: Filter out redundant inline-instances")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/166761727445.480106.3738447577082071942.stgit@devnote3
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit f4a2aade6809c657 ("perf tests powerpc: Fix branch stack sampling
test to include sanity check for branch filter") added a skip if certain
branch options aren't available.
But the change added both -b (--branch-any) and --branch-filter options
at the same time, which will always result in a failure on any platform
because the arguments can't be used together.
Fix this by removing -b (--branch-any) and leaving --branch-filter which
already specifies 'any'. Also add warning messages to the test and perf
tool.
Output on x86 before this fix:
$ sudo ./perf test branch
108: Check branch stack sampling : Skip
After:
$ sudo ./perf test branch
108: Check branch stack sampling : Ok
Fixes: f4a2aade6809c657 ("perf tests powerpc: Fix branch stack sampling test to include sanity check for branch filter")
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman.Khandual@arm.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221028121913.745307-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf stat' with CSV output option prints an extra empty string as first
field in metrics output line. Sample output below:
# ./perf stat -x, --per-socket -a -C 1 ls
S0,1,1.78,msec,cpu-clock,1785146,100.00,0.973,CPUs utilized
S0,1,26,,context-switches,1781750,100.00,0.015,M/sec
S0,1,1,,cpu-migrations,1780526,100.00,0.561,K/sec
S0,1,1,,page-faults,1779060,100.00,0.561,K/sec
S0,1,875807,,cycles,1769826,100.00,0.491,GHz
S0,1,85281,,stalled-cycles-frontend,1767512,100.00,9.74,frontend cycles idle
S0,1,576839,,stalled-cycles-backend,1766260,100.00,65.86,backend cycles idle
S0,1,288430,,instructions,1762246,100.00,0.33,insn per cycle
====> ,S0,1,,,,,,,2.00,stalled cycles per insn
The above command line uses field separator as "," via "-x," option and
per-socket option displays socket value as first field. But here the
last line for "stalled cycles per insn" has "," in the beginning.
Sample output using interval mode:
# ./perf stat -I 1000 -x, --per-socket -a -C 1 ls
0.001813453,S0,1,1.87,msec,cpu-clock,1872052,100.00,0.002,CPUs utilized
0.001813453,S0,1,2,,context-switches,1868028,100.00,1.070,K/sec
------
0.001813453,S0,1,85379,,instructions,1856754,100.00,0.32,insn per cycle
====> 0.001813453,,S0,1,,,,,,,1.34,stalled cycles per insn
Above result also has an extra CSV separator after
the timestamp. Patch addresses extra field separator
in the beginning of the metric output line.
The counter stats are displayed by function
"perf_stat__print_shadow_stats" in code
"util/stat-shadow.c". While printing the stats info
for "stalled cycles per insn", function "new_line_csv"
is used as new_line callback.
The new_line_csv function has check for "os->prefix"
and if prefix is not null, it will be printed along
with cvs separator.
Snippet from "new_line_csv":
if (os->prefix)
fprintf(os->fh, "%s%s", os->prefix, config->csv_sep);
Here os->prefix gets printed followed by ","
which is the cvs separator. The os->prefix is
used in interval mode option ( -I ), to print
time stamp on every new line. But prefix is
already set to contain CSV separator when used
in interval mode for CSV option.
Reference: Function "static void print_interval"
Snippet:
sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep);
Also if prefix is not assigned (if not used with
-I option), it gets set to empty string.
Reference: function printout() in util/stat-display.c
Snippet:
.prefix = prefix ? prefix : "",
Since prefix already set to contain cvs_sep in interval
option, patch removes printing config->csv_sep in
new_line_csv function to avoid printing extra field.
After the patch:
# ./perf stat -x, --per-socket -a -C 1 ls
S0,1,2.04,msec,cpu-clock,2045202,100.00,1.013,CPUs utilized
S0,1,2,,context-switches,2041444,100.00,979.289,/sec
S0,1,0,,cpu-migrations,2040820,100.00,0.000,/sec
S0,1,2,,page-faults,2040288,100.00,979.289,/sec
S0,1,254589,,cycles,2036066,100.00,0.125,GHz
S0,1,82481,,stalled-cycles-frontend,2032420,100.00,32.40,frontend cycles idle
S0,1,113170,,stalled-cycles-backend,2031722,100.00,44.45,backend cycles idle
S0,1,88766,,instructions,2030942,100.00,0.35,insn per cycle
S0,1,,,,,,,1.27,stalled cycles per insn
Fixes: 92a61f6412d3a09d ("perf stat: Implement CSV metrics output")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Reviewed-By: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221018085605.63834-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The following command will get segfault due to missing aggr_header_csv
for AGGR_NODE:
$ sudo perf stat -a --per-node -x, --metric-only true
Committer testing:
Before this patch:
# perf stat -a --per-node -x, --metric-only true
Segmentation fault (core dumped)
#
After:
# gdb perf
-bash: gdb: command not found
# perf stat -a --per-node -x, --metric-only true
node,Ghz,frontend cycles idle,backend cycles idle,insn per cycle,branch-misses of all branches,
N0,32,0.335,2.10,0.65,0.69,0.03,1.92,
#
Fixes: 86895b480a2f10c7 ("perf stat: Add --per-node agregation support")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: http://lore.kernel.org/lkml/20221107213314.3239159-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As this is where we expect to find bpf/bpf_helpers.h, etc.
This needs more work to make it follow LIBBPF_DYNAMIC=1 usage, i.e. when
not using the system libbpf it should use the headers in the in-kernel
sources libbpf in tools/lib/bpf.
We need to do that anyway to avoid this mixup system libbpf and
in-kernel files, so we'll get this sorted out that way.
And this also may become moot as we move to using BPF skels for this
feature.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Don't use deprecated and now broken map style. Avoid use of
tools/perf/include/bpf/bpf.h and use the more regular BPF headers.
Committer notes:
Add /usr/include to the include path so that bpf/bpf_helpers.h can be
found, remove sys/socket.h, adding the sockaddr_storage definition, also
remove stdbool.h, both were preventing building the
augmented_raw_syscalls.c file with clang, revisit later.
Testing it:
Asking for syscalls that have string arguments:
# perf trace -e ~acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c,string --max-events 10
0.000 thermald/1144 openat(dfd: CWD, filename: "/sys/class/powercap/intel-rapl/intel-rapl:0/intel-rapl:0:2/energy_uj", flags: RDONLY) = 13
0.158 thermald/1144 openat(dfd: CWD, filename: "/sys/class/powercap/intel-rapl/intel-rapl:0/energy_uj", flags: RDONLY) = 13
0.215 thermald/1144 openat(dfd: CWD, filename: "/sys/class/thermal/thermal_zone3/temp", flags: RDONLY) = 13
16.448 cgroupify/36478 openat(dfd: 4, filename: ".", flags: RDONLY|CLOEXEC|DIRECTORY|NONBLOCK) = 5
16.468 cgroupify/36478 newfstatat(dfd: 5, filename: "", statbuf: 0x7fffca5b4130, flag: 4096) = 0
16.473 systemd-oomd/972 openat(dfd: CWD, filename: "/proc/meminfo", flags: RDONLY|CLOEXEC) = 12
16.499 systemd-oomd/972 newfstatat(dfd: 12, filename: "", statbuf: 0x7ffd2bc73cc0, flag: 4096) = 0
16.516 abrt-dump-jour/1370 openat(dfd: CWD, filename: "/var/log/journal/d6a97235307247e09f13f326fb607e3c/system.journal", flags: RDONLY|CLOEXEC|NONBLOCK) = 21
16.538 abrt-dump-jour/1370 newfstatat(dfd: 21, filename: "", statbuf: 0x7ffc651b8980, flag: 4096) = 0
16.540 abrt-dump-jour/1371 openat(dfd: CWD, filename: "/var/log/journal/d6a97235307247e09f13f326fb607e3c/system.journal", flags: RDONLY|CLOEXEC|NONBLOCK) = 21
#
Networking syscalls:
# perf trace -e ~acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c,sendto*,connect* --max-events 10
0.000 isc-net-0005/1206 connect(fd: 512, uservaddr: { .family: INET, port: 53, addr: 23.211.132.65 }, addrlen: 16) = 0
0.070 isc-net-0002/1203 connect(fd: 515, uservaddr: { .family: INET6, port: 53, addr: 2600:1401:2::43 }, addrlen: 28) = -1 ENETUNREACH (Network is unreachable)
0.031 isc-net-0006/1207 connect(fd: 513, uservaddr: { .family: INET6, port: 53, addr: 2600:1401:2::43 }, addrlen: 28) = -1 ENETUNREACH (Network is unreachable)
0.079 isc-net-0006/1207 sendto(fd: 3, buff: 0x7f73a40611b0, len: 106, flags: NOSIGNAL, addr: { .family: UNSPEC }, addr_len: NULL) = 106
0.180 isc-net-0006/1207 connect(fd: 519, uservaddr: { .family: INET6, port: 53, addr: 2600:1401:1::43 }, addrlen: 28) = -1 ENETUNREACH (Network is unreachable)
0.211 isc-net-0006/1207 sendto(fd: 3, buff: 0x7f73a4061230, len: 106, flags: NOSIGNAL, addr: { .family: UNSPEC }, addr_len: NULL) = 106
0.298 isc-net-0006/1207 connect(fd: 515, uservaddr: { .family: INET, port: 53, addr: 96.7.49.67 }, addrlen: 16) = 0
0.109 isc-net-0004/1205 connect(fd: 518, uservaddr: { .family: INET6, port: 53, addr: 2600:1401:2::43 }, addrlen: 28) = -1 ENETUNREACH (Network is unreachable)
0.164 isc-net-0002/1203 sendto(fd: 3, buff: 0x7f73ac064300, len: 107, flags: NOSIGNAL, addr: { .family: UNSPEC }, addr_len: NULL) = 107
0.247 isc-net-0002/1203 connect(fd: 522, uservaddr: { .family: INET6, port: 53, addr: 2600:1401:1::43 }, addrlen: 28) = -1 ENETUNREACH (Network is unreachable)
#
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20221103045437.163510-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'session_done' variable is written to inside the signal handler of
'perf report' and 'perf script'. Switch its type to avoid undefined
behavior.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20221024181913.630986-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fix to get the declared file name even if it uses file index 0
in DWARF5, using custom die_get_decl_file() function.
Actually, the DWARF5 standard says file index 0 of the DW_AT_decl_file
is invalid(1), but there is a discussion and maybe this will be updated
[2].
Anyway, clang generates such DWARF5 file for the linux kernel. Thus it
must be handled.
Without this, 'perf probe' returns an error:
$ ./perf probe -k $BIN_PATH/vmlinux -s $SRC_PATH -L vfs_read:10
Debuginfo analysis failed.
Error: Failed to show lines.
With this, it can handle the case correctly:
$ ./perf probe -k $BIN_PATH/vmlinux -s $SRC_PATH -L vfs_read:10
<vfs_read@$SRC_PATH/fs/read_write.c:10>
11 ret = rw_verify_area(READ, file, pos, count);
12 if (ret)
return ret;
[1] DWARF5 specification 2.14 says "The value 0 indicates that no source file has been specified.")
[2] http://wiki.dwarfstd.org/index.php?title=DWARF5_Line_Table_File_Numbers)
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/166731052936.2100653.13380621874859467731.stgit@devnote3
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use dwarf_attr_integrate() instead of dwarf_attr() for generic attribute
acccessor functions, so that it can find the specified attribute from
abstact origin DIE etc.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/166731051988.2100653.13595339994343449770.stgit@devnote3
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since clang generates DWARF5 which sets DW_AT_decl_file as 0,
dwarf_decl_file() thinks that is invalid and returns NULL. In that case
'perf probe' SIGSEGVs because it doesn't expect a NULL decl_file.
This adds a dwarf_decl_file() return value check to avoid such SEGV with
clang generated DWARF5 info.
Without this, 'perf probe' crashes:
$ perf probe -k $BIN_PATH/vmlinux -s $SRC_PATH -L vfs_read:10
Segmentation fault
$
With this, it just warns about it:
$ perf probe -k $BIN_PATH/vmlinux -s $SRC_PATH -L vfs_read:10
Debuginfo analysis failed.
Error: Failed to show lines.
$
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/166731051077.2100653.15626653369345128302.stgit@devnote3
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In most configurations, it works well with skipping 4 entries by
default. If some systems still have 3 BPF internal stack frames,
the next frame should be in a lock function which will be skipped
later when it tries to find a caller. So increasing to 4 won't
affect such systems too.
With --stack-skip=0, I can see something like this:
24 49.84 us 7.41 us 2.08 us mutex bpf_prog_e1b85959d520446c_contention_begin+0x12e
0xffffffffc045040e bpf_prog_e1b85959d520446c_contention_begin+0x12e
0xffffffffc045040e bpf_prog_e1b85959d520446c_contention_begin+0x12e
0xffffffff82ea2071 bpf_trace_run2+0x51
0xffffffff82de775b __bpf_trace_contention_begin+0xb
0xffffffff82c02045 __mutex_lock+0x245
0xffffffff82c019e3 __mutex_lock_slowpath+0x13
0xffffffff82c019c0 mutex_lock+0x20
0xffffffff830a083c kernfs_iop_permission+0x2c
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221028180128.3311491-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The msan also warns about the use of VLA for stack_trace variable.
We can dynamically allocate instead. While at it, simplify the error
handle a bit (and fix bugs).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221028180128.3311491-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The msan reported a use-of-uninitialized-value warning for the struct
lock_contention_data in lock_contention_read(). While it'd be filled
by bpf_map_lookup_elem(), let's just initialize it to silence the
warning.
==12524==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x562b0f16b1cd in lock_contention_read util/bpf_lock_contention.c:139:7
#1 0x562b0ef65ec6 in __cmd_contention builtin-lock.c:1737:3
#2 0x562b0ef65ec6 in cmd_lock builtin-lock.c:1992:8
#3 0x562b0ee7f50b in run_builtin perf.c:322:11
#4 0x562b0ee7efc1 in handle_internal_command perf.c:376:8
#5 0x562b0ee7e1e9 in run_argv perf.c:420:2
#6 0x562b0ee7e1e9 in main perf.c:550:3
#7 0x7f065f10e632 in __libc_start_main (/usr/lib64/libc.so.6+0x61632)
#8 0x562b0edf2fa9 in _start (perf+0xfa9)
SUMMARY: MemorySanitizer: use-of-uninitialized-value (perf+0xe15160) in lock_contention_read
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221028180128.3311491-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Needed to get the event_attr_init() and perf_event_paranoid() prototypes
that were being obtained indirectly, by sheer luck.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Those headers are not needed in util/mmap.h, remove them.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Its a thread method, so move it to thread.h, this way some places that
were using event.h just to get this prototype may stop doing so and
speed up building and disentanble the header dependency graph.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
