| Age | Commit message (Collapse) | Author |
|---|
|
Rename perf_evlist__exit() to evlist__exit(), so we don't have a name
clash when we add perf_evlist__exit() to libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rename perf_evlist__munmap() to evlist__munmap(), so we don't have a
name clash when we add perf_evlist__munmap() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rename perf_evlist__mmap() to evlist__mmap(), so we don't have a name
clash when we add perf_evlist__mmap() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rename 'struct perf_evlist' to 'struct evlist', so we don't have a name
clash when we add 'struct perf_mmap' to libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This will allow us to untangle the header dependency a bit more, as some
places will not need event.h anymore.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-enqncj29ovzaat3cd9203rwl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Its not needed there, add it to the places that need it and were getting
it via those headers.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-5yulx1u16vyd0zmrbg1tjhju@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There is no need for that util/util.h include there and, remove it,
pruning the include tree, fix the fallout by adding necessary headers to
places that were getting needed includes indirectly from evlist.h ->
util.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-s9f7uve8wvykr5itcm7m7d8q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the evlist__set_maps() function from tools/perf to libperf.
Committer notes:
Fix up reject due to earlier inversion in calling perf_evlist__init().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-57-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move threads from tools/perf's evlist to libperf's perf_evlist struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-56-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move cpus from tools/perf's evlist to libperf's perf_evlist struct.
Committer notes:
Fixed up this one:
tools/perf/arch/arm/util/cs-etm.c
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-55-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move has_user_cpus from tools/perf's evlist to libbperf's perf_evlist struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-54-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move nr_entries count from 'struct perf' to into perf_evlist struct.
Committer notes:
Fix tools/perf/arch/s390/util/auxtrace.c case. And also the comment in
tools/perf/util/annotate.h.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-42-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Include perf_evlist in the evlist object, will continue to move other
generic things into libperf's perf_evlist.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-37-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Including perf_evsel in evsel object, will continue to move other
generic things into libperf's perf_evsel struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-36-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rename perf_evlist__disable() to evlist__disable(), so we don't have a
name clash when we add perf_evlist__disable() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-23-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rename perf_evlist__enable() to evlist__enable(), so we don't have a
name clash when we add perf_evlist__enable() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-22-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rename perf_evlist__close() to evlist__close(), so we don't have a name
clash when we add perf_evlist__close() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-21-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rename perf_evlist__open() to evlist__open(), so we don't have a name
clash when we add perf_evlist__open() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rename perf_evlist__remove() to evlist__remove(), so we don't have a
name clash when we add perf_evlist__remove() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rename perf_evlist__add() to evlist__add(), so we don't have a name
clash when we add perf_evlist__add() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-13-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rename perf_evlist__delete() to evlist__delete(), so we don't have a
name clash when we add perf_evlist__delete() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rename perf_evlist__new() to evlist__new(), so we don't have a name
clash when we add perf_evlist__new() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rename perf_evlist__init() to evlist__init(), so we don't have a name
clash when we add perf_evlist__init() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rename struct perf_evlist to struct evlist, so we don't have a name
clash when we add struct perf_evlist in libperf.
Committer notes:
Added fixes to build on arm64, from Jiri and from me
(tools/perf/util/cs-etm.c)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rename struct perf_evsel to struct evsel, so we don't have a name clash
when we add struct perf_evsel in libperf.
Committer notes:
Added fixes for arm64, provided by Jiri.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rename struct thread_map to struct perf_thread_map, so it could be part
of libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rename struct cpu_map to struct perf_cpu_map, so it could be part of
libperf.
Committer notes:
Added fixes for arm64, provided by Jiri.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Implemented mmap data buffer that is used as the memory to operate
on when compressing data in case of serial trace streaming.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/49b31321-0f70-392b-9a4f-649d3affe090@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Implement a --mmap-flush option that specifies minimal number of bytes
that is extracted from mmaped kernel buffer to store into a trace. The
default option value is 1 byte what means every time trace writing
thread finds some new data in the mmaped buffer the data is extracted,
possibly compressed and written to a trace.
$ tools/perf/perf record --mmap-flush 1024 -e cycles -- matrix.gcc
$ tools/perf/perf record --aio --mmap-flush 1K -e cycles -- matrix.gcc
The option is independent from -z setting, doesn't vary with compression
level and can serve two purposes.
The first purpose is to increase the compression ratio of a trace data.
Larger data chunks are compressed more effectively so the implemented
option allows specifying data chunk size to compress. Also at some cases
executing more write syscalls with smaller data size can take longer
than executing less write syscalls with bigger data size due to syscall
overhead so extracting bigger data chunks specified by the option value
could additionally decrease runtime overhead.
The second purpose is to avoid self monitoring live-lock issue in system
wide (-a) profiling mode. Profiling in system wide mode with compression
(-a -z) can additionally induce data into the kernel buffers along with
the data from monitored processes. If performance data rate and volume
from the monitored processes is high then trace streaming and
compression activity in the tool is also high. High tool process
activity can lead to subtle live-lock effect when compression of single
new byte from some of mmaped kernel buffer leads to generation of the
next single byte at some mmaped buffer. So perf tool process ends up in
endless self monitoring.
Implemented synch parameter is the mean to force data move independently
from the specified flush threshold value. Despite the provided flush
value the tool needs capability to unconditionally drain memory buffers,
at least in the end of the collection.
Committer testing:
Running with the default value, i.e. as soon as there is something to
read go on consuming, we first write the synthesized events, small
chunks of about 128 bytes:
# perf trace -m 2048 --call-graph dwarf -e write -- perf record
<SNIP>
101.142 ( 0.004 ms): perf/25821 write(fd: 3</root/perf.data>, buf: 0x210db60, count: 120) = 120
__libc_write (/usr/lib64/libpthread-2.28.so)
ion (/home/acme/bin/perf)
record__write (inlined)
process_synthesized_event (/home/acme/bin/perf)
perf_tool__process_synth_event (inlined)
perf_event__synthesize_mmap_events (/home/acme/bin/perf)
Then we move to reading the mmap buffers consuming the events put there
by the kernel perf infrastructure:
107.561 ( 0.005 ms): perf/25821 write(fd: 3</root/perf.data>, buf: 0x7f1befc02000, count: 336) = 336
__libc_write (/usr/lib64/libpthread-2.28.so)
ion (/home/acme/bin/perf)
record__write (inlined)
record__pushfn (/home/acme/bin/perf)
perf_mmap__push (/home/acme/bin/perf)
record__mmap_read_evlist (inlined)
record__mmap_read_all (inlined)
__cmd_record (inlined)
cmd_record (/home/acme/bin/perf)
12919.953 ( 0.136 ms): perf/25821 write(fd: 3</root/perf.data>, buf: 0x7f1befc83150, count: 184984) = 184984
<SNIP same backtrace as in the 107.561 timestamp>
12920.094 ( 0.155 ms): perf/25821 write(fd: 3</root/perf.data>, buf: 0x7f1befc02150, count: 261816) = 261816
<SNIP same backtrace as in the 107.561 timestamp>
12920.253 ( 0.093 ms): perf/25821 write(fd: 3</root/perf.data>, buf: 0x7f1befb81120, count: 170832) = 170832
<SNIP same backtrace as in the 107.561 timestamp>
If we limit it to write only when more than 16MB are available for
reading, it throttles that to a quarter of the --mmap-pages set for
'perf record', which by default get to 528384 bytes, found out using
'record -v':
mmap flush: 132096
mmap size 528384B
With that in place all the writes coming from
record__mmap_read_evlist(), i.e. from the mmap buffers setup by the
kernel perf infrastructure were at least 132096 bytes long.
Trying with a bigger mmap size:
perf trace -e write perf record -v -m 2048 --mmap-flush 16M
74982.928 ( 2.471 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff94a6cc000, count: 3580888) = 3580888
74985.406 ( 2.353 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff949ecb000, count: 3453256) = 3453256
74987.764 ( 2.629 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff9496ca000, count: 3859232) = 3859232
74990.399 ( 2.341 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff948ec9000, count: 3769032) = 3769032
74992.744 ( 2.064 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff9486c8000, count: 3310520) = 3310520
74994.814 ( 2.619 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff947ec7000, count: 4194688) = 4194688
74997.439 ( 2.787 ms): perf/26500 write(fd: 3</root/perf.data>, buf: 0x7ff9476c6000, count: 4029760) = 4029760
Was again limited to a quarter of the mmap size:
mmap flush: 2098176
mmap size 8392704B
A warning about that would be good to have but can be added later,
something like:
"max flush is a quarter of the mmap size, if wanting to bump the mmap
flush further, bump the mmap size as well using -m/--mmap-pages"
Also rename the 'sync' parameters to 'synch' to keep tools/perf building
with older glibcs:
cc1: warnings being treated as errors
builtin-record.c: In function 'record__mmap_read_evlist':
builtin-record.c:775: warning: declaration of 'sync' shadows a global declaration
/usr/include/unistd.h:933: warning: shadowed declaration is here
builtin-record.c: In function 'record__mmap_read_all':
builtin-record.c:856: warning: declaration of 'sync' shadows a global declaration
/usr/include/unistd.h:933: warning: shadowed declaration is here
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/f6600d72-ecfa-2eb7-7e51-f6954547d500@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
After a discussion with Andi, move the perf_event_attr.precise_ip
detection for maximum precise config (via :P modifier or for default
cycles event) to perf_evsel__open().
The current detection in perf_event_attr__set_max_precise_ip() is
tricky, because precise_ip config is specific for given event and it
currently checks only hw cycles.
We now check for valid precise_ip value right after failing
sys_perf_event_open() for specific event, before any of the
perf_event_attr fallback code gets executed.
This way we get the proper config in perf_event_attr together with
allowed precise_ip settings.
We can see that code activity with -vv, like:
$ perf record -vv ls
...
------------------------------------------------------------
perf_event_attr:
size 112
{ sample_period, sample_freq } 4000
...
precise_ip 3
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
ksymbol 1
------------------------------------------------------------
sys_perf_event_open: pid 9926 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open failed, error -95
decreasing precise_ip by one (2)
------------------------------------------------------------
perf_event_attr:
size 112
{ sample_period, sample_freq } 4000
...
precise_ip 2
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
ksymbol 1
------------------------------------------------------------
sys_perf_event_open: pid 9926 cpu 0 group_fd -1 flags 0x8 = 4
...
Suggested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-dkvxxbeg7lu74155d4jhlmc9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch introduces side band thread that captures extended
information for events like PERF_RECORD_BPF_EVENT.
This new thread uses its own evlist that uses ring buffer with very low
watermark for lower latency.
To use side band thread, we need to:
1. add side band event(s) by calling perf_evlist__add_sb_event();
2. calls perf_evlist__start_sb_thread();
3. at the end of perf run, perf_evlist__stop_sb_thread().
In the next patch, we use this thread to handle PERF_RECORD_BPF_EVENT.
Committer notes:
Add fix by Jiri Olsa for when te sb_tread can't get started and then at
the end the stop_sb_thread() segfaults when joining the (non-existing)
thread.
That can happen when running 'perf top' or 'perf record' as a normal
user, for instance.
Further checks need to be done on top of this to more graciously handle
these possible failure scenarios.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-15-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Allocate affinity option and masks for mmap data buffers and record
thread as well as initialize allocated objects.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/526fa2b0-07de-6dbd-a7e9-26ba875593c9@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
On s390 the event bc000 (also named CF_DIAG) extracts the CPU
Measurement Facility diagnostic counter sets and displays them as
counter number and counter value pairs sorted by counter set number.
Output:
[root@s35lp76 perf]# ./perf report -D --stdio
[00000000] Counterset:0 Counters:6
Counter:000 Value:0x000000000085ec36 Counter:001 Value:0x0000000000796c94
Counter:002 Value:0x0000000000005ada Counter:003 Value:0x0000000000092460
Counter:004 Value:0x0000000000006073 Counter:005 Value:0x00000000001a9a73
[0x000038] Counterset:1 Counters:2
Counter:000 Value:0x000000000007c59f Counter:001 Value:0x000000000002fad6
[0x000050] Counterset:2 Counters:16
Counter:000 Value:000000000000000000 Counter:001 Value:000000000000000000
Counter:002 Value:000000000000000000 Counter:003 Value:000000000000000000
Counter:004 Value:000000000000000000 Counter:005 Value:000000000000000000
Counter:006 Value:000000000000000000 Counter:007 Value:000000000000000000
Counter:008 Value:000000000000000000 Counter:009 Value:000000000000000000
Counter:010 Value:000000000000000000 Counter:011 Value:000000000000000000
Counter:012 Value:000000000000000000 Counter:013 Value:000000000000000000
Counter:014 Value:000000000000000000 Counter:015 Value:000000000000000000
[0x0000d8] Counterset:3 Counters:128
Counter:000 Value:0x000000000000020f Counter:001 Value:0x00000000000001d8
Counter:002 Value:0x000000000000d7fa Counter:003 Value:0x000000000000008b
...
The number in brackets is the offset into the raw data field of the
sample.
New functions trace_event_sample_raw__init() and s390_sample_raw() are
introduced in the code path to enable interpretation on non s390
platforms. This event bc000 attached raw data is generated only on s390
platform. Correct display on other platforms requires correct endianness
handling.
Committer notes:
Added a init function that sets up a evlist function pointer to avoid
repeated tests on evlist->env and calls to perf_env__name() that
involves normalizing, etc, for each PERF_RECORD_SAMPLE.
Removed needless __maybe_unused from the trace_event_raw()
prototype in session.h, move it to be an static function in evlist.
The 'offset' variable is a size_t, not an u64, fix it to avoid this on
some arches:
CC /tmp/build/perf/util/s390-sample-raw.o
util/s390-sample-raw.c: In function 's390_cpumcfdg_testctr':
util/s390-sample-raw.c:77:4: error: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'size_t' [-Werror=format=]
pr_err("Invalid counter set entry at %#" PRIx64 "\n",
^
cc1: all warnings being treated as errors
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: https://lkml.kernel.org/r/9c856ac0-ef23-72b5-901d-a1f815508976@linux.ibm.com
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Link: https://lkml.kernel.org/n/tip-s3jhif06et9ug78qhclw41z1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The trace file offset is read once before mmaps iterating loop and
written back after all performance data is enqueued for aio writing.
The trace file offset is incremented linearly after every successful aio
write operation.
record__aio_sync() blocks till completion of the started AIO operation
and then proceeds.
record__aio_mmap_read_sync() implements a barrier for all incomplete
aio write requests.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/ce2d45e9-d236-871c-7c8f-1bed2d37e8ac@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To better reflect that this is a tracepoint filter, as opposed, for
instance to map based BPF filters.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-9138svli6ddcphrr3ymy9oy3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
- Move the function from builtin-stat to evlist for reuse
- Rename to evlist to match purpose better
- Pass the evlist as first argument.
- No functional changes
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181001195927.14211-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For non-explicit group (e.g. those created with -e '{eventA,eventB}'),
'perf report' supports a option '--group' which can enable group output.
We also need to support 'perf annotate' with the same '--group'.
Create a new function perf_evlist__force_leader() which contains common
code to force setting the group leader.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1526914666-31839-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Discards legacy interfaces perf_evlist__mmap_read_forward(),
perf_evlist__mmap_read() and perf_evlist__mmap_consume().
No tools use them.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-14-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf_evlist__mmap_read_catchup() and perf_evlist__mmap_read_backward()
are only for overwrite mode.
But they read the evlist->mmap buffer which is for non-overwrite mode.
It did not bring any serious problem yet, because there is no one use
it.
Remove the unused interfaces.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1516310792-208685-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Not needed there, fixup the places where it is needed and was getting
only by luck via evlist.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-yxjpetn64z8vjuguu84gr6x6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf report/script/... have a --time option to limit the time range of
output. That's very useful to slice large traces, e.g. when processing
the output of perf script for some analysis.
But right now --time only supports absolute time. Also there is no fast
way to get the start/end times of a given trace except for looking at
it. This makes it hard to e.g. only decode the first half of the trace,
which is useful for parallelization of scripts
Another problem is that perf records are variable size and there is no
synchronization mechanism. So the only way to find the last sample
reliably would be to walk all samples. But we want to avoid that in perf
report/... because it is already quite expensive. That is why storing
the first sample time and last sample time in perf record is better.
This patch creates a new header feature type HEADER_SAMPLE_TIME and
related ops. Save the first sample time and the last sample time to the
feature section in perf file header. That will be done when, for
instance, processing build-ids, where we already have to process all
samples to create the build-id table, take advantage of that to further
amortize that processing by storing HEADER_SAMPLE_TIME to make 'perf
report/script' faster when using --time.
Committer testing:
After this patch is applied the header is written with zeroes, we need
the next patch, for "perf record" to actually write the timestamps:
# perf report -D | grep PERF_RECORD_SAMPLE\(
22501155244406 0x44f0 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4001): 25016/25016: 0xffffffffa21be8c5 period: 1 addr: 0
<SNIP>
22501155793625 0x4a30 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4001): 25016/25016: 0xffffffffa21ffd50 period: 2828043 addr: 0
# perf report --header | grep "time of "
# time of first sample : 0.000000
# time of last sample : 0.000000
#
Changelog:
v7: 1. Rebase to latest perf/core branch.
2. Add following clarification in patch description according to
Arnaldo's suggestion.
"That will be done when, for instance, processing build-ids,
where we already have to process all samples to create the
build-id table, take advantage of that to further amortize
that processing by storing HEADER_SAMPLE_TIME to make
'perf report/script' faster when using --time."
v4: Use perf script time style for timestamp printing. Also add with
the printing of sample duration.
v3: Remove the definitions of first_sample_time/last_sample_time from
perf_session. Just define them in perf_evlist
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512738826-2628-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Remove the backward/forward concept to make it uniform with user
interface (the '--overwrite' option).
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mengting Zhang <zhangmengting@huawei.com>
Link: http://lkml.kernel.org/r/20171204165107.95327-4-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
evlist->overwrite is set to false in all users. It can be removed.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/20171203020044.81680-4-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
All users of perf_evlist__mmap_ex set !overwrite. Remove it from its
arguments list.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/20171203020044.81680-3-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now all perf_evlist__mmap's users doesn't set 'overwrite'. Remove it
from arguments list.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/20171203020044.81680-2-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add perf_evlist__parse_sample_timestamp to retrieve the timestamp of the
sample.
The idea is to use this function instead of the full sample parsing
before we queue the sample. At that time only the timestamp is needed
and we parse the sample once again later on delivery.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-o7syqo8lipj4or7renpu8e8y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The warning about kptr_restrict needs to be emitted only when it is set
and we ask for kernel space samples, so add a helper to help with that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-fh7drty6yljei9gxxzer6eup@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Conflicts:
tools/perf/arch/arm/annotate/instructions.c
tools/perf/arch/arm64/annotate/instructions.c
tools/perf/arch/powerpc/annotate/instructions.c
tools/perf/arch/s390/annotate/instructions.c
tools/perf/arch/x86/tests/intel-cqm.c
tools/perf/ui/tui/progress.c
tools/perf/util/zlib.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To better organize the sources, and we may end up even using it
directly, without evlists and evsels.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-oiqrm7grflurnnzo2ovfnslg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
