summaryrefslogtreecommitdiff
path: root/tools/include/nolibc
AgeCommit message (Collapse)Author
2023-08-23tools/nolibc: arch-loongarch.h: shrink with _NOLIBC_SYSCALL_CLOBBERLISTZhangjin Wu
my_syscall<N> share the same long clobber list, define a macro for them. Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23toolc/nolibc: arch-*.h: clean up whitespaces after __asm__Zhangjin Wu
replace "__asm__ volatile" with "__asm__ volatile" and insert necessary whitespace before "\" to make sure the lines are aligned. $ sed -i -e 's/__asm__ volatile ( /__asm__ volatile ( /g' tools/include/nolibc/*.h Note, arch-s390.h uses post-tab instead of post-whitespaces, must avoid insert whitespace just before the tabs: $ sed -i -e 's/__asm__ volatile (\t/__asm__ volatile (\t/g' tools/include/nolibc/arch-*.h Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23tools/nolibc: arch-*.h: fix up code indent errorsZhangjin Wu
More than 8 whitespaces of the code indent are replaced with "tab + whitespaces" to fix up such errors reported by scripts/checkpatch.pl: ERROR: code indent should use tabs where possible #64: FILE: tools/include/nolibc/arch-mips.h:64: +^I \$ ERROR: code indent should use tabs where possible #72: FILE: tools/include/nolibc/arch-mips.h:72: +^I "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \$ This command is used: $ sed -i -e '/^\t* /{s/ /\t/g}' tools/include/nolibc/arch-*.h Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-06tools/nolibc: unistd.h: reorder the syscall macrosZhangjin Wu
Tune the macros in the using order and align most of them. Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-06tools/nolibc: sys.h: apply __sysret() helperZhangjin Wu
Use __sysret() to shrink most of the library routines to oneline code. Removed 266 lines of duplicated code. Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-06tools/nolibc: unistd.h: apply __sysret() helperZhangjin Wu
Use __sysret() to shrink the whole _syscall() to oneline code. Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-06tools/nolibc: sys.h: add a syscall return helperZhangjin Wu
Most of the library routines share the same syscall return logic: In general, a 0 return value indicates success. A -1 return value indicates an error, and an error number is stored in errno. [1] Let's add a __sysret() helper for the above logic to simplify the coding and shrink the code lines too. Thomas suggested to use inline function instead of macro for __sysret(). Willy suggested to make __sysret() be always inline. [1]: https://man7.org/linux/man-pages/man2/syscall.2.html Suggested-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/linux-riscv/ZH1+hkhiA2+ItSvX@1wt.eu/ Suggested-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/linux-riscv/ea4e7442-7223-4211-ba29-70821e907888@t-8ch.de/ Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-06tools/nolibc: fix up undeclared syscall macros with #ifdef and -ENOSYSZhangjin Wu
Compiling nolibc for rv32 got such errors: nolibc/sysroot/riscv/include/sys.h: In function ‘sys_gettimeofday’: nolibc/sysroot/riscv/include/sys.h:557:21: error: ‘__NR_gettimeofday’ undeclared (first use in this function); did you mean ‘sys_gettimeofday’? 557 | return my_syscall2(__NR_gettimeofday, tv, tz); | ^~~~~~~~~~~~~~~~~ nolibc/sysroot/riscv/include/sys.h: In function ‘sys_lseek’: nolibc/sysroot/riscv/include/sys.h:675:21: error: ‘__NR_lseek’ undeclared (first use in this function) 675 | return my_syscall3(__NR_lseek, fd, offset, whence); | ^~~~~~~~~~ nolibc/sysroot/riscv/include/sys.h: In function ‘sys_wait4’: nolibc/sysroot/riscv/include/sys.h:1341:21: error: ‘__NR_wait4’ undeclared (first use in this function) 1341 | return my_syscall4(__NR_wait4, pid, status, options, rusage); If a syscall macro is not supported by a target platform, wrap it with '#ifdef' and 'return -ENOSYS' for the '#else' branch, which lets the other syscalls work as-is and allows developers to fix up the test failures reported by nolibc-test one by one later. This wraps all of the failed syscall macros with '#ifdef' and 'return -ENOSYS' for the '#else' branch, so, all of the undeclared failures are fixed. Suggested-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/linux-riscv/5e7d2adf-e96f-41ca-a4c6-5c87a25d4c9c@app.fastmail.com/ Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-06tools/nolibc: fix up #error compile failures with -ENOSYSZhangjin Wu
Compiling nolibc for rv32 got such errors: In file included from nolibc/sysroot/riscv/include/nolibc.h:99, from nolibc/sysroot/riscv/include/errno.h:26, from nolibc/sysroot/riscv/include/stdio.h:14, from tools/testing/selftests/nolibc/nolibc-test.c:12: nolibc/sysroot/riscv/include/sys.h:946:2: error: #error Neither __NR_ppoll nor __NR_poll defined, cannot implement sys_poll() 946 | #error Neither __NR_ppoll nor __NR_poll defined, cannot implement sys_poll() | ^~~~~ nolibc/sysroot/riscv/include/sys.h:1062:2: error: #error None of __NR_select, __NR_pselect6, nor __NR__newselect defined, cannot implement sys_select() 1062 | #error None of __NR_select, __NR_pselect6, nor __NR__newselect defined, cannot implement sys_select() If a syscall is not supported by a target platform, 'return -ENOSYS' is better than '#error', which lets the other syscalls work as-is and allows developers to fix up the test failures reported by nolibc-test one by one later. This converts all of the '#error' to 'return -ENOSYS', so, all of the '#error' failures are fixed. Suggested-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/linux-riscv/5e7d2adf-e96f-41ca-a4c6-5c87a25d4c9c@app.fastmail.com/ Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-06-09tools/nolibc: open: fix up compile warning for armZhangjin Wu
In function ‘open’: nolibc/sysroot/arm/include/sys.h:919:23: warning: ‘mode_t’ {aka ‘short unsigned int’} is promoted to ‘int’ when passed through ‘...’ 919 | mode = va_arg(args, mode_t); | ^ nolibc/sysroot/arm/include/sys.h:919:23: note: (so you should pass ‘int’ not ‘mode_t’ {aka ‘short unsigned int’} to ‘va_arg’) nolibc/sysroot/arm/include/sys.h:919:23: note: if this code is reached, the program will abort Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: arm: add missing my_syscall6Zhangjin Wu
This is required by the coming removal of the oldselect and newselect support. pselect6/pselect6_time64 will be used unconditionally, they have 6 arguments. Suggested-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/linux-riscv/bf3e07c1-75f5-425b-9124-f3f2b230e63a@app.fastmail.com/ Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09selftests/nolibc: not include limits.h for nolibcZhangjin Wu
When compile nolibc-test.c with 2.31 glibc, we got such error: In file included from /usr/riscv64-linux-gnu/include/sys/cdefs.h:452, from /usr/riscv64-linux-gnu/include/features.h:461, from /usr/riscv64-linux-gnu/include/bits/libc-header-start.h:33, from /usr/riscv64-linux-gnu/include/limits.h:26, from /usr/lib/gcc-cross/riscv64-linux-gnu/9/include/limits.h:194, from /usr/lib/gcc-cross/riscv64-linux-gnu/9/include/syslimits.h:7, from /usr/lib/gcc-cross/riscv64-linux-gnu/9/include/limits.h:34, from /labs/linux-lab/src/linux-stable/tools/testing/selftests/nolibc/nolibc-test.c:6: /usr/riscv64-linux-gnu/include/bits/wordsize.h:28:3: error: #error "rv32i-based targets are not supported" 28 | # error "rv32i-based targets are not supported" Glibc (>= 2.33) commit 5b6113d62efa ("RISC-V: Support the 32-bit ABI implementation") fixed up above error. As suggested by Thomas, defining INT_MIN/INT_MAX for nolibc can remove the including of limits.h, and therefore no above error. of course, the other libcs still require limits.h, move it to the right place. The LONG_MIN/LONG_MAX are also defined too. Suggested-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/linux-riscv/09d60dc2-e298-4c22-8e2f-8375861bd9be@t-8ch.de/ Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: ensure fast64 integer types have 64 bitsThomas Weißschuh
On 32bit platforms size_t is not enough to represent [u]int_fast64_t. Fixes: 3e9fd4e9a1d5 ("tools/nolibc: add integer types and integer limit macros") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: ppoll/ppoll_time64: add a missing argumentZhangjin Wu
The ppoll and ppoll_time64 syscalls have 5 arguments, but we only provide 4, align with kernel and add the missing sigsetsize argument. Because the sigmask is NULL, the last sigsetsize argument is ignored, keep it as 0 here is safe enough. Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: support nanoseconds in stat()Thomas Weißschuh
Keep backwards compatibility through unions. The compatibility macros like #define st_atime st_atim.tv_sec as documented in stat(3type) don't work for nolibc because it would break with other stat-like structures that contain the field st_atime. The stx_atime, stx_mtime, stx_ctime are in type of 'struct statx_timestamp', which is incompatible with 'struct timespec', should be converted explicitly. /* include/uapi/linux/stat.h */ struct statx_timestamp { __s64 tv_sec; __u32 tv_nsec; __s32 __reserved; }; /* include/uapi/linux/time.h */ struct timespec { __kernel_old_time_t tv_sec; /* seconds */ long tv_nsec; /* nanoseconds */ }; Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/linux-riscv/3a3edd48-1ace-4c89-89e8-9c594dd1b3c9@t-8ch.de/ Co-authored-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> [wt: squashed Zhangjin & Thomas' patches into one to preserve "bisectability"] Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: add support for prctl()Thomas Weißschuh
It will be used to disable core dumps from the child spawned to validate the stack protector functionality. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: s390: disable stackprotector in _startThomas Weißschuh
s390 does not support the "global" stack protector mode that is implemented in nolibc. Now that nolibc detects if stack protectors are enabled at runtime it could happen that a future compiler does indeed use global mode on and nolibc would compile but segfault at runtime. To avoid this hypothetic case and to align s390 with the other architectures disable stack protectors when compiling _start(). Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: fix segfaults on compilers without attribute no_stack_protectorThomas Weißschuh
Not all compilers, notably GCC < 10, have support for __attribute__((no_stack_protector)). Fall back to a mechanism that also works there. Tested with GCC 9.5.0 from kernel.org crosstools. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: add autodetection for stackprotector supportThomas Weißschuh
The stackprotector support in nolibc should be enabled iff it is also enabled in the compiler. Use the preprocessor defines added by gcc and clang if stackprotector support is enable to automatically do so in nolibc. This completely removes the need for any user-visible API. To avoid inlining the lengthy preprocessor check into every user introduce a new header compiler.h that abstracts the logic away. As the define NOLIBC_STACKPROTECTOR is now not user-relevant anymore prefix it with an underscore. Suggested-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/lkml/20230520133237.GA27501@1wt.eu/ Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: reformat list of headers to be installedThomas Weißschuh
This makes it easier to add and remove more entries in the future without creating spurious diff hunks. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: ensure stack protector guard is never zeroThomas Weißschuh
The all-zero pattern is one of the more probable out-of-bound writes so add a special case to not accidentally accept it. Also it enables the reliable detection of stack protector initialization during testing. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: x86_64: disable stack protector for _startThomas Weißschuh
This was forgotten in the original submission. It is unknown why it worked for x86_64 on some compiler without this attribute. Reported-by: Willy Tarreau <w@1wt.eu> Closes: https://lore.kernel.org/lkml/20230520133237.GA27501@1wt.eu/ Fixes: 0d8c461adbc4 ("tools/nolibc: x86_64: add stackprotector support") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: fix typo pint -> pointThomas Weißschuh
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: riscv: add stackprotector supportThomas Weißschuh
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: mips: add stackprotector supportThomas Weißschuh
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: loongarch: add stackprotector supportThomas Weißschuh
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: arm: add stackprotector supportThomas Weißschuh
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: aarch64: add stackprotector supportThomas Weißschuh
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc/unistd: add syscall()Thomas Weißschuh
syscall() is used by "normal" libcs to allow users to directly call syscalls. By having the same syntax inside nolibc users can more easily write code that works with different libcs. The macro logic is adapted from systemtaps STAP_PROBEV() macro that is released in the public domain / CC0. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: riscv: Fix up load/store instructions for rv32Zhangjin Wu
When compile nolibc application for rv32, we got such errors: nolibc/sysroot/riscv/include/arch.h:190: Error: unrecognized opcode `ld a4,0(a3)' nolibc/sysroot/riscv/include/arch.h:194: Error: unrecognized opcode `sd a3,%lo(_auxv)(a4)' nolibc/sysroot/riscv/include/arch.h:196: Error: unrecognized opcode `sd a2,%lo(environ)(a3)' Refer to arch/riscv/include/asm/asm.h and add REG_L/REG_S macros here to let rv32 uses its own lw/sw instructions. Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: remove LINUX_REBOOT_ constantsThomas Weißschuh
The same constants and some more have been exposed to userspace via linux/reboot.h for a long time. To avoid conflicts and trim down nolibc a bit drop the custom definitions. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: s390: provide custom implementation for sys_forkThomas Weißschuh
On s390 the first two arguments to the clone() syscall are swapped, as documented in clone(2). Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Cc: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: use C89 comment syntaxThomas Weißschuh
Most of nolibc is already using C89 comments. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: use __inline__ syntaxThomas Weißschuh
When building in strict C89 mode the "inline" keyword is unknown. While "__inline__" is non-standard it is used by the kernel headers themselves. So the used compilers would have to support it or the users shim it with a #define. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: use standard __asm__ statementsThomas Weißschuh
Most of the code was migrated to C99-conformant __asm__ statements before. It seems string.h was missed. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: Fix build of stdio.h due to header orderingMark Brown
When we added fd based file streams we created references to STx_FILENO in stdio.h but these constants are declared in unistd.h which is the last file included by the top level nolibc.h meaning those constants are not defined when we try to build stdio.h. This causes programs using nolibc.h to fail to build. Reorder the headers to avoid this issue. Fixes: d449546c957f ("tools/nolibc: implement fd-based FILE streams") Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: implement fd-based FILE streamsThomas Weißschuh
This enables the usage of the stream APIs with arbitrary filedescriptors. It will be used by a future testcase. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-06-09tools/nolibc: add wrapper for memfd_createThomas Weißschuh
This is useful for users and will also be used by a future testcase. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-04-24Merge tag 'linux-kselftest-next-6.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest updates from Shuah Khan: - several patches to enhance and fix resctrl test - nolibc support for kselftest with an addition to vprintf() to tools/nolibc/stdio and related test changes - Refactor 'peeksiginfo' ptrace test part - add 'malloc' failures checks in cgroup test_memcontrol - a new prctl test - enhancements sched test with additional ore schedule prctl calls * tag 'linux-kselftest-next-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits) selftests/resctrl: Fix incorrect error return on test complete selftests/resctrl: Remove duplicate codes that clear each test result file selftests/resctrl: Commonize the signal handler register/unregister for all tests selftests/resctrl: Cleanup properly when an error occurs in CAT test selftests/resctrl: Flush stdout file buffer before executing fork() selftests/resctrl: Return MBA check result and make it to output message selftests/resctrl: Fix set up schemata with 100% allocation on first run in MBM test selftests/resctrl: Use correct exit code when tests fail kselftest/arm64: Convert za-fork to use kselftest.h kselftest: Support nolibc tools/nolibc/stdio: Implement vprintf() selftests/resctrl: Correct get_llc_perf() param in function comment selftests/resctrl: Use remount_resctrlfs() consistently with boolean selftests/resctrl: Change name from CBM_MASK_PATH to INFO_PATH selftests/resctrl: Change initialize_llc_perf() return type to void selftests/resctrl: Replace obsolete memalign() with posix_memalign() selftests/resctrl: Check for return value after write_schemata() selftests/resctrl: Allow ->setup() to return errors selftests/resctrl: Move ->setup() call outside of test specific branches selftests/resctrl: Return NULL if malloc_and_init_memory() did not alloc mem ...
2023-04-11tools/nolibc/stdio: Implement vprintf()Mark Brown
vprintf() is equivalent to vfprintf() to stdout so implement it as a simple wrapper for the existing vfprintf(), allowing us to build kselftest.h. Suggested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Willy Tarreau <w@1wt.eu> Acked-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-03-27tools/nolibc: x86_64: add stackprotector supportThomas Weißschuh
Enable the new stackprotector support for x86_64. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-03-27tools/nolibc: i386: add stackprotector supportThomas Weißschuh
Enable the new stackprotector support for i386. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-03-27tools/nolibc: add support for stack protectorThomas Weißschuh
This is useful when using nolibc for security-critical tools. Using nolibc has the advantage that the code is easily auditable and sandboxable with seccomp as no unexpected syscalls are used. Using compiler-assistent stack protection provides another security mechanism. For this to work the compiler and libc have to collaborate. This patch adds the following parts to nolibc that are required by the compiler: * __stack_chk_guard: random sentinel value * __stack_chk_fail: handler for detected stack smashes In addition an initialization function is added that randomizes the sentinel value. Only support for global guards is implemented. Register guards are useful in multi-threaded context which nolibc does not provide support for. Link: https://lwn.net/Articles/584225/ Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-03-27tools/nolibc: add helpers for wait() signal exitsThomas Weißschuh
These are useful for users and will also be used in an upcoming testcase. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-03-27tools/nolibc: add definitions for standard fdsThomas Weißschuh
These are useful for users and will also be used in an upcoming testcase. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-03-20tools/nolibc: Add support for LoongArchFeiyang Chen
Add support for LoongArch (32 and 64 bit) to nolibc. Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn> Acked-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-03-20tools/nolibc: Add statx() and make stat() rely on statx() if necessaryFeiyang Chen
LoongArch and RISC-V 32-bit only have statx(). ARC, Hexagon, Nios2 and OpenRISC have statx() and stat64() but not stat() or newstat(). Add statx() and make stat() rely on statx() if necessary to make them happy. We may just use statx() for all architectures in the future. Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn> Acked-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-03-20tools/nolibc: Include linux/fcntl.h and remove duplicate codeFeiyang Chen
Include linux/fcntl.h for O_* and AT_*. asm/fcntl.h is included by linux/fcntl.h, so it can be safely removed. Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn> Acked-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-03-20tools/nolibc: check for S_I* macros before defining themWilly Tarreau
Defining S_I* flags in types.h can cause some build failures if linux/stat.h is included prior to it. But if not defined, some toolchains that include some glibc parts will in turn fail because linux/stat.h already takes care of avoiding these definitions when glibc is present. Let's preserve the macros here but first include linux/stat.h and check for their definition before doing so. We also define the previously missing permission macros so that we don't get a different behavior depending on the first include found. Cc: Feiyang Chen <chenfeiyang@loongson.cn> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-03-20tools/nolibc: add getuid() and geteuid()Willy Tarreau
This can be useful to avoid attempting some privileged operations, starting from the nolibc-test tool that gets two failures when not privileged. We call getuid32() and geteuid32() when they are defined, and fall back to getuid() and geteuid() otherwise. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-06-17 12:48:44 +0000