summaryrefslogtreecommitdiff
path: root/tools/bpf/bpftool/Documentation
AgeCommit message (Collapse)Author
2023-05-23bpftool: Specify XDP Hints ifname when loading programLarysa Zaremba
Add ability to specify a network interface used to resolve XDP hints kfuncs when loading program through bpftool. Usage: bpftool prog load [...] xdpmeta_dev <ifname> Writing just 'dev <ifname>' instead of 'xdpmeta_dev' is a very probable mistake that results in not very descriptive errors, so 'bpftool prog load [...] dev <ifname>' syntax becomes deprecated, followed by 'bpftool map create [...] dev <ifname>' for consistency. Now, to offload program, execute: bpftool prog load [...] offload_dev <ifname> To offload map: bpftool map create [...] offload_dev <ifname> 'dev <ifname>' still performs offloading in the commands above, but now triggers a warning and is excluded from bash completion. 'xdpmeta_dev' and 'offload_dev' are mutually exclusive options, because 'xdpmeta_dev' basically makes a program device-bound without loading it onto the said device. For now, offloaded programs cannot use XDP hints [0], but if this changes, using 'offload_dev <ifname>' should cover this case. [0] https://lore.kernel.org/bpf/a5a636cc-5b03-686f-4be0-000383b05cfc@linux.dev Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20230517160103.1088185-1-larysa.zaremba@intel.com
2023-04-21bpftool: Update doc to explain struct_ops register subcommand.Kui-Feng Lee
The "struct_ops register" subcommand now allows for an optional *LINK_DIR* to be included. This specifies the directory path where bpftool will pin struct_ops links with the same name as their corresponding map names. Signed-off-by: Kui-Feng Lee <kuifeng@meta.com> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/r/20230420002822.345222-2-kuifeng@meta.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-05bpftool: Support "opcodes", "linum", "visual" simultaneouslyQuentin Monnet
When dumping a program, the keywords "opcodes" (for printing the raw opcodes), "linum" (for displaying the filename, line number, column number along with the source code), and "visual" (for generating the control flow graph for translated programs) are mutually exclusive. But there's no reason why they should be. Let's make it possible to pass several of them at once. The "file FILE" option, which makes bpftool output a binary image to a file, remains incompatible with the others. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/r/20230405132120.59886-6-quentin@isovalent.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-05bpftool: Fix documentation about line info display for prog dumpsQuentin Monnet
The documentation states that when line_info is available when dumping a program, the source line will be displayed "by default". There is no notion of "default" here: the line is always displayed if available, there is no way currently to turn it off. In the next sentence, the documentation states that if "linum" is used on the command line, the relevant filename, line, and column will be displayed "on top of the source line". This is incorrect, as they are currently displayed on the right side of the source line (or on top of the eBPF instruction, not the source). This commit fixes the documentation to address these points. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/r/20230405132120.59886-2-quentin@isovalent.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-11-20bpftool: remove support of --legacy option for bpftoolSahid Orentino Ferdjaoui
Following: commit bd054102a8c7 ("libbpf: enforce strict libbpf 1.0 behaviors") commit 93b8952d223a ("libbpf: deprecate legacy BPF map definitions") The --legacy option is no longer relevant as libbpf no longer supports it. libbpf_set_strict_mode() is a no-op operation. Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@industrialdiscipline.com> Acked-by: Yonghong Song <yhs@fb.com> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/r/20221120112515.38165-2-sahid.ferdjaoui@industrialdiscipline.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-10-25bpftool: Support new cgroup local storageYonghong Song
Add support for new cgroup local storage Acked-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20221026042901.674177-1-yhs@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-10-25bpftool: Add llvm feature to "bpftool version"Quentin Monnet
Similarly to "libbfd", add a "llvm" feature to the output of command "bpftool version" to indicate that LLVM is used for disassembling JIT-ed programs. This feature is mutually exclusive (from Makefile definitions) with "libbfd". Signed-off-by: Quentin Monnet <quentin@isovalent.com> Tested-by: Niklas Söderlund <niklas.soderlund@corigine.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20221025150329.97371-9-quentin@isovalent.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-10-21bpftool: Update doc (add autoattach to prog load)Wang Yufen
Add autoattach optional to prog load|loadall for supporting one-step load-attach-pin_link. Signed-off-by: Wang Yufen <wangyufen@huawei.com> Link: https://lore.kernel.org/r/1665736275-28143-3-git-send-email-wangyufen@huawei.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-09-21bpf: Define new BPF_MAP_TYPE_USER_RINGBUF map typeDavid Vernet
We want to support a ringbuf map type where samples are published from user-space, to be consumed by BPF programs. BPF currently supports a kernel -> user-space circular ring buffer via the BPF_MAP_TYPE_RINGBUF map type. We'll need to define a new map type for user-space -> kernel, as none of the helpers exported for BPF_MAP_TYPE_RINGBUF will apply to a user-space producer ring buffer, and we'll want to add one or more helper functions that would not apply for a kernel-producer ring buffer. This patch therefore adds a new BPF_MAP_TYPE_USER_RINGBUF map type definition. The map type is useless in its current form, as there is no way to access or use it for anything until we one or more BPF helpers. A follow-on patch will therefore add a new helper function that allows BPF programs to run callbacks on samples that are published to the ring buffer. Signed-off-by: David Vernet <void@manifault.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220920000100.477320-2-void@manifault.com
2022-07-05bpftool: Rename "bpftool feature list" into "... feature list_builtins"Quentin Monnet
To make it more explicit that the features listed with "bpftool feature list" are known to bpftool, but not necessary available on the system (as opposed to the probed features), rename the "feature list" command into "feature list_builtins". Note that "bpftool feature list" still works as before given that we recognise arguments from their prefixes; but the real name of the subcommand, in particular as displayed in the man page or the interactive help, will now include "_builtins". Since we update the bash completion accordingly, let's also take this chance to redirect error output to /dev/null in the completion script, to avoid displaying unexpected error messages when users attempt to tab-complete. Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220701093805.16920-1-quentin@isovalent.com
2022-06-30bpftool: Add feature list (prog/map/link/attach types, helpers)Quentin Monnet
Add a "bpftool feature list" subcommand to list BPF "features". Contrarily to "bpftool feature probe", this is not about the features available on the system. Instead, it lists all features known to bpftool from compilation time; in other words, all program, map, attach, link types known to the libbpf version in use, and all helpers found in the UAPI BPF header. The first use case for this feature is bash completion: running the command provides a list of types that can be used to produce the list of candidate map types, for example. Now that bpftool uses "standard" names provided by libbpf for the program, map, link, and attach types, having the ability to list these types and helpers could also be useful in scripts to loop over existing items. Sample output: # bpftool feature list prog_types | grep -vw unspec | head -n 6 socket_filter kprobe sched_cls sched_act tracepoint xdp # bpftool -p feature list map_types | jq '.[1]' "hash" # bpftool feature list attach_types | grep '^cgroup_' cgroup_inet_ingress cgroup_inet_egress [...] cgroup_inet_sock_release # bpftool feature list helpers | grep -vw bpf_unspec | wc -l 207 The "unspec" types and helpers are not filtered out by bpftool, so as to remain closer to the enums, and to preserve the indices in the JSON arrays (e.g. "hash" at index 1 == BPF_MAP_TYPE_HASH in map types list). Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Müller <deso@posteo.net> Link: https://lore.kernel.org/bpf/20220629203637.138944-2-quentin@isovalent.com
2022-06-02bpftool: Use libbpf_bpf_attach_type_strDaniel Müller
This change switches bpftool over to using the recently introduced libbpf_bpf_attach_type_str function instead of maintaining its own string representation for the bpf_attach_type enum. Note that contrary to other enum types, the variant names that bpftool maps bpf_attach_type to do not adhere a simple to follow rule. With bpf_prog_type, for example, the textual representation can easily be inferred by stripping the BPF_PROG_TYPE_ prefix and lowercasing the remaining string. bpf_attach_type violates this rule for various variants. We decided to fix up this deficiency with this change, meaning that bpftool uses the same textual representations as libbpf. Supporting tests, completion scripts, and man pages have been adjusted accordingly. However, we did add support for accepting (the now undocumented) original attach type names when they are provided by users. For the test (test_bpftool_synctypes.py), I have removed the enum representation checks, because we no longer mirror the various enum variant names in bpftool source code. For the man page, help text, and completion script checks we are now using enum definitions from uapi/linux/bpf.h as the source of truth directly. Signed-off-by: Daniel Müller <deso@posteo.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20220523230428.3077108-10-deso@posteo.net
2022-03-17bpftool: Add support for subskeletonsDelyan Kratunov
Subskeletons are headers which require an already loaded program to operate. For example, when a BPF library is linked into a larger BPF object file, the library userspace needs a way to access its own global variables without requiring knowledge about the larger program at build time. As a result, subskeletons require a loaded bpf_object to open(). Further, they find their own symbols in the larger program by walking BTF type data at run time. At this time, programs, maps, and globals are supported through non-owning pointers. Signed-off-by: Delyan Kratunov <delyank@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/ca8a48b4841c72d285ecce82371bef4a899756cb.1647473511.git.delyank@fb.com
2022-03-15bpftool: man: Add missing top level docsDaniel Xu
The top-level (bpftool.8) man page was missing docs for a few subcommands and their respective sub-sub-commands. This commit brings the top level man page up to date. Note that I've kept the ordering of the subcommands the same as in `bpftool help`. Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/3049ef5dc509c0d1832f0a8b2dba2ccaad0af688.1647213551.git.dxu@dxuuu.xyz
2022-02-16bpftool: Gen min_core_btf explanation and examplesRafael David Tinoco
Add "min_core_btf" feature explanation and one example of how to use it to bpftool-gen man page. Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io> Signed-off-by: Rafael David Tinoco <rafael.tinoco@aquasec.com> Signed-off-by: Lorenzo Fontana <lorenzo.fontana@elastic.co> Signed-off-by: Leonardo Di Donato <leonardo.didonato@elastic.co> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220215225856.671072-7-mauricio@kinvolk.io
2022-02-10bpftool: Add libbpf's version number to "bpftool version" outputQuentin Monnet
To help users check what version of libbpf is being used with bpftool, print the number along with bpftool's own version number. Output: $ ./bpftool version ./bpftool v5.16.0 using libbpf v0.7 features: libbfd, libbpf_strict, skeletons $ ./bpftool version --json --pretty { "version": "5.16.0", "libbpf_version": "0.7", "features": { "libbfd": true, "libbpf_strict": true, "skeletons": true } } Note that libbpf does not expose its patch number. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220210104237.11649-2-quentin@isovalent.com
2021-11-16bpftool: Update doc (use susbtitutions) and test_bpftool_synctypes.pyQuentin Monnet
test_bpftool_synctypes.py helps detecting inconsistencies in bpftool between the different list of types and options scattered in the sources, the documentation, and the bash completion. For options that apply to all bpftool commands, the script had a hardcoded list of values, and would use them to check whether the man pages are up-to-date. When writing the script, it felt acceptable to have this list in order to avoid to open and parse bpftool's main.h every time, and because the list of global options in bpftool doesn't change so often. However, this is prone to omissions, and we recently added a new -l|--legacy option which was described in common_options.rst, but not listed in the options summary of each manual page. The script did not complain, because it keeps comparing the hardcoded list to the (now) outdated list in the header file. To address the issue, this commit brings the following changes: - Options that are common to all bpftool commands (--json, --pretty, and --debug) are moved to a dedicated file, and used in the definition of a RST substitution. This substitution is used in the sources of all the man pages. - This list of common options is updated, with the addition of the new -l|--legacy option. - The script test_bpftool_synctypes.py is updated to compare: - Options specific to a command, found in C files, for the interactive help messages, with the same specific options from the relevant man page for that command. - Common options, checked just once: the list in main.h is compared with the new list in substitutions.rst. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211115225844.33943-3-quentin@isovalent.com
2021-11-16bpftool: Add SPDX tags to RST documentation filesQuentin Monnet
Most files in the kernel repository have a SPDX tags. The files that don't have such a tag (or another license boilerplate) tend to fall under the GPL-2.0 license. In the past, bpftool's Makefile (for example) has been marked as GPL-2.0 for that reason, when in fact all bpftool is dual-licensed. To prevent a similar confusion from happening with the RST documentation files for bpftool, let's explicitly mark all files as dual-licensed. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211115225844.33943-2-quentin@isovalent.com
2021-11-14bpftool: Fix mixed indentation in documentationQuentin Monnet
Some paragraphs in bpftool's documentation have a mix of tabs and spaces for indentation. Let's make it consistent. This patch brings no change to the text content. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211110114632.24537-7-quentin@isovalent.com
2021-11-14bpftool: Update the lists of names for maps and prog-attach typesQuentin Monnet
To support the different BPF map or attach types, bpftool must remain up-to-date with the types supported by the kernel. Let's update the lists, by adding the missing Bloom filter map type and the perf_event attach type. Both missing items were found with test_bpftool_synctypes.py. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211110114632.24537-6-quentin@isovalent.com
2021-11-14bpftool: Fix indent in option lists in the documentationQuentin Monnet
Mixed indentation levels in the lists of options in bpftool's documentation produces some unexpected results. For the "bpftool" man page, it prints a warning: $ make -C bpftool.8 GEN bpftool.8 <stdin>:26: (ERROR/3) Unexpected indentation. For other pages, there is no warning, but it results in a line break appearing in the option lists in the generated man pages. RST paragraphs should have a uniform indentation level. Let's fix it. Fixes: c07ba629df97 ("tools: bpftool: Update and synchronise option list in doc and help msg") Fixes: 8cc8c6357c8f ("tools: bpftool: Document and add bash completion for -L, -B options") Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211110114632.24537-5-quentin@isovalent.com
2021-11-14bpftool: Remove inclusion of utilities.mak from MakefilesQuentin Monnet
Bpftool's Makefile, and the Makefile for its documentation, both include scripts/utilities.mak, but they use none of the items defined in this file. Remove the includes. Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool") Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211110114632.24537-3-quentin@isovalent.com
2021-11-12bpftool: Enable libbpf's strict mode by defaultStanislav Fomichev
Otherwise, attaching with bpftool doesn't work with strict section names. Also: - Add --legacy option to switch back to pre-1.0 behavior - Print a warning when program fails to load in strict mode to point to --legacy flag - By default, don't append / to the section name; in strict mode it's relevant only for a small subset of prog types + bpftool --legacy prog loadall tools/testing/selftests/bpf/test_cgroup_link.o /sys/fs/bpf/kprobe type kprobe libbpf: failed to pin program: File exists Error: failed to pin all programs + bpftool prog loadall tools/testing/selftests/bpf/test_cgroup_link.o /sys/fs/bpf/kprobe type kprobe v1 -> v2: - strict by default (Quentin Monnet) - add more info to --legacy description (Quentin Monnet) - add bash completion (Quentin Monnet) Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20211110192324.920934-1-sdf@google.com
2021-11-10bpftool: Fix SPDX tag for Makefiles and .gitignoreQuentin Monnet
Bpftool is dual-licensed under GPLv2 and BSD-2-Clause. In commit 907b22365115 ("tools: bpftool: dual license all files") we made sure that all its source files were indeed covered by the two licenses, and that they had the correct SPDX tags. However, bpftool's Makefile, the Makefile for its documentation, and the .gitignore file were skipped at the time (their GPL-2.0-only tag was added later). Let's update the tags. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Joe Stringer <joe@cilium.io> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/20211105221904.3536-1-quentin@isovalent.com
2021-07-30tools: bpftool: Complete metrics list in "bpftool prog profile" docQuentin Monnet
Profiling programs with bpftool was extended some time ago to support two new metrics, namely itlb_misses and dtlb_misses (misses for the instruction/data translation lookaside buffer). Update the manual page and bash completion accordingly. Fixes: 450d060e8f75 ("bpftool: Add {i,d}tlb_misses support for bpftool profile") Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210730215435.7095-8-quentin@isovalent.com
2021-07-30tools: bpftool: Document and add bash completion for -L, -B optionsQuentin Monnet
The -L|--use-loader option for using loader programs when loading, or when generating a skeleton, did not have any documentation or bash completion. Same thing goes for -B|--base-btf, used to pass a path to a base BTF object for split BTF such as BTF for kernel modules. This patch documents and adds bash completion for those options. Fixes: 75fa1777694c ("tools/bpftool: Add bpftool support for split BTF") Fixes: d510296d331a ("bpftool: Use syscall/loader program in "prog load" and "gen skeleton" command.") Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210730215435.7095-7-quentin@isovalent.com
2021-07-30tools: bpftool: Update and synchronise option list in doc and help msgQuentin Monnet
All bpftool commands support the options for JSON output and debug from libbpf. In addition, some commands support additional options corresponding to specific use cases. The list of options described in the man pages for the different commands are not always accurate. The messages for interactive help are mostly limited to HELP_SPEC_OPTIONS, and are even less representative of the actual set of options supported for the commands. Let's update the lists: - HELP_SPEC_OPTIONS is modified to contain the "default" options (JSON and debug), and to be extensible (no ending curly bracket). - All commands use HELP_SPEC_OPTIONS in their help message, and then complete the list with their specific options. - The lists of options in the man pages are updated. - The formatting of the list for bpftool.rst is adjusted to match formatting for the other man pages. This is for consistency, and also because it will be helpful in a future patch to automatically check that the files are synchronised. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210730215435.7095-5-quentin@isovalent.com
2021-07-30tools: bpftool: Complete and synchronise attach or map typesQuentin Monnet
Update bpftool's list of attach type names to tell it about the latest attach types, or the "ringbuf" map. Also update the documentation, help messages, and bash completion when relevant. These missing items were reported by the newly added Python script used to help maintain consistency in bpftool. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210730215435.7095-4-quentin@isovalent.com
2021-05-25bpftool: Add sock_release help info for cgroup attach/prog load commandLiu Jian
The help information was not added at the time when the function got added. Fix this and add the missing information to its cli, documentation and bash completion. Fixes: db94cc0b4805 ("bpftool: Add support for BPF_CGROUP_INET_SOCK_RELEASE") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20210525014139.323859-1-liujian56@huawei.com
2021-03-18bpftool: Add `gen object` command to perform BPF static linkingAndrii Nakryiko
Add `bpftool gen object <output-file> <input_file>...` command to statically link multiple BPF ELF object files into a single output BPF ELF object file. This patch also updates bash completions and man page. Man page gets a short section on `gen object` command, but also updates the skeleton example to show off workflow for BPF application with two .bpf.c files, compiled individually with Clang, then resulting object files are linked together with `gen object`, and then final object file is used to generate usable BPF skeleton. This should help new users understand realistic workflow w.r.t. compiling mutli-file BPF application. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20210318194036.3521577-10-andrii@kernel.org
2021-03-18bpftool: Add ability to specify custom skeleton object nameAndrii Nakryiko
Add optional name OBJECT_NAME parameter to `gen skeleton` command to override default object name, normally derived from input file name. This allows much more flexibility during build time. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210318194036.3521577-9-andrii@kernel.org
2021-03-04tools/bpf: Remove bpf-helpers from bpftool docsJoe Stringer
This logic is used for validating the manual pages from selftests, so move the infra under tools/testing/selftests/bpf/ and rely on selftests for validation rather than tying it into the bpftool build. Signed-off-by: Joe Stringer <joe@cilium.io> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20210302171947.2268128-12-joe@cilium.io
2020-11-06bpftool: Add support for task local storageKP Singh
Updates the binary to handle the BPF_MAP_TYPE_TASK_STORAGE as "task_storage" for printing and parsing. Also updates the documentation and bash completion Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20201106103747.2780972-5-kpsingh@chromium.org
2020-09-14bpftool: Fix build failureYonghong Song
When building bpf selftests like make -C tools/testing/selftests/bpf -j20 I hit the following errors: ... GEN /net-next/tools/testing/selftests/bpf/tools/build/bpftool/Documentation/bpftool-gen.8 <stdin>:75: (WARNING/2) Block quote ends without a blank line; unexpected unindent. <stdin>:71: (WARNING/2) Literal block ends without a blank line; unexpected unindent. <stdin>:85: (WARNING/2) Literal block ends without a blank line; unexpected unindent. <stdin>:57: (WARNING/2) Block quote ends without a blank line; unexpected unindent. <stdin>:66: (WARNING/2) Literal block ends without a blank line; unexpected unindent. <stdin>:109: (WARNING/2) Literal block ends without a blank line; unexpected unindent. <stdin>:175: (WARNING/2) Literal block ends without a blank line; unexpected unindent. <stdin>:273: (WARNING/2) Literal block ends without a blank line; unexpected unindent. make[1]: *** [/net-next/tools/testing/selftests/bpf/tools/build/bpftool/Documentation/bpftool-perf.8] Error 12 make[1]: *** Waiting for unfinished jobs.... make[1]: *** [/net-next/tools/testing/selftests/bpf/tools/build/bpftool/Documentation/bpftool-iter.8] Error 12 make[1]: *** [/net-next/tools/testing/selftests/bpf/tools/build/bpftool/Documentation/bpftool-struct_ops.8] Error 12 ... I am using: -bash-4.4$ rst2man --version rst2man (Docutils 0.11 [repository], Python 2.7.5, on linux2) -bash-4.4$ The Makefile generated final .rst file (e.g., bpftool-cgroup.rst) looks like ... ID AttachType AttachFlags Name \n SEE ALSO\n========\n\t**bpf**\ (2),\n\t**bpf-helpers**\ (7),\n\t**bpftool**\ (8),\n\t**bpftool-btf**\ (8),\n\t**bpftool-feature**\ (8),\n\t**bpftool-gen**\ (8),\n\t**bpftool-iter**\ (8),\n\t**bpftool-link**\ (8),\n\t**bpftool-map**\ (8),\n\t**bpftool-net**\ (8),\n\t**bpftool-perf**\ (8),\n\t**bpftool-prog**\ (8),\n\t**bpftool-struct_ops**\ (8)\n The rst2man generated .8 file looks like Literal block ends without a blank line; unexpected unindent. .sp n SEEALSOn========nt**bpf**(2),nt**bpf\-helpers**(7),nt**bpftool**(8),nt**bpftool\-btf**(8),nt** bpftool\-feature**(8),nt**bpftool\-gen**(8),nt**bpftool\-iter**(8),nt**bpftool\-link**(8),nt** bpftool\-map**(8),nt**bpftool\-net**(8),nt**bpftool\-perf**(8),nt**bpftool\-prog**(8),nt** bpftool\-struct_ops**(8)n Looks like that particular version of rst2man prefers to have actual new line instead of \n. Since `echo -e` may not be available in some environment, let us use `printf`. Format string "%b" is used for `printf` to ensure all escape characters are interpretted properly. Fixes: 18841da98100 ("tools: bpftool: Automate generation for "SEE ALSO" sections in man pages") Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Cc: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20200914183110.999906-1-yhs@fb.com
2020-09-10tools: bpftool: Automate generation for "SEE ALSO" sections in man pagesQuentin Monnet
The "SEE ALSO" sections of bpftool's manual pages refer to bpf(2), bpf-helpers(7), then all existing bpftool man pages (save the current one). This leads to nearly-identical lists being duplicated in all manual pages. Ideally, when a new page is created, all lists should be updated accordingly, but this has led to omissions and inconsistencies multiple times in the past. Let's take it out of the RST files and generate the "SEE ALSO" sections automatically in the Makefile when generating the man pages. The lists are not really useful in the RST anyway because all other pages are available in the same directory. v3: - Fix conflict with a previous patchset that introduced RST2MAN_OPTS variable passed to rst2man. v2: - Use "echo -n" instead of "printf" in Makefile, to avoid any risk of passing a format string directly to the command. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200910203935.25304-1-quentin@isovalent.com
2020-09-10tools: bpftool: Add "inner_map" to "bpftool map create" outer mapsQuentin Monnet
There is no support for creating maps of types array-of-map or hash-of-map in bpftool. This is because the kernel needs an inner_map_fd to collect metadata on the inner maps to be supported by the new map, but bpftool does not provide a way to pass this file descriptor. Add a new optional "inner_map" keyword that can be used to pass a reference to a map, retrieve a fd to that map, and pass it as the inner_map_fd. Add related documentation and bash completion. Note that we can reference the inner map by its name, meaning we can have several times the keyword "name" with different meanings (mandatory outer map name, and possibly a name to use to find the inner_map_fd). The bash completion will offer it just once, and will not suggest "name" on the following command: # bpftool map create /sys/fs/bpf/my_outer_map type hash_of_maps \ inner_map name my_inner_map [TAB] Fixing that specific case seems too convoluted. Completion will work as expected, however, if the outer map name comes first and the "inner_map name ..." is passed second. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200910102652.10509-4-quentin@isovalent.com
2020-09-10tools: bpftool: Include common options from separate fileQuentin Monnet
Nearly all man pages for bpftool have the same common set of option flags (--help, --version, --json, --pretty, --debug). The description is duplicated across all the pages, which is more difficult to maintain if the description of an option changes. It may also be confusing to sort out what options are not "common" and should not be copied when creating new manual pages. Let's move the description for those common options to a separate file, which is included with a RST directive when generating the man pages. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200909162500.17010-3-quentin@isovalent.com
2020-09-10tools: bpftool: Print optional built-in features along with versionQuentin Monnet
Bpftool has a number of features that can be included or left aside during compilation. This includes: - Support for libbfd, providing the disassembler for JIT-compiled programs. - Support for BPF skeletons, used for profiling programs or iterating on the PIDs of processes associated with BPF objects. In order to make it easy for users to understand what features were compiled for a given bpftool binary, print the status of the two features above when showing the version number for bpftool ("bpftool -V" or "bpftool version"). Document this in the main manual page. Example invocations: $ bpftool version ./bpftool v5.9.0-rc1 features: libbfd, skeletons $ bpftool -p version { "version": "5.9.0-rc1", "features": { "libbfd": true, "skeletons": true } } Some other parameters are optional at compilation ("DISASM_FOUR_ARGS_SIGNATURE", LIBCAP support) but they do not impact significantly bpftool's behaviour from a user's point of view, so their status is not reported. Available commands and supported program types depend on the version number, and are therefore not reported either. Note that they are already available, albeit without JSON, via bpftool's help messages. v3: - Use a simple list instead of boolean values for plain output. v2: - Fix JSON (object instead or array for the features). Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200909162500.17010-2-quentin@isovalent.com
2020-09-10tools: bpftool: Log info-level messages when building bpftool man pagesQuentin Monnet
To build man pages for bpftool (and for eBPF helper functions), rst2man can log different levels of information. Let's make it log all levels to keep the RST files clean. Doing so, rst2man complains about double colons, used for literal blocks, that look like underlines for section titles. Let's add the necessary blank lines. v2: - Use "--verbose" instead of "-r 1" (same behaviour but more readable). - Pass it through a RST2MAN_OPTS variable so we can easily pass other options too. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200909162251.15498-2-quentin@isovalent.com
2020-09-07tools: bpftool: Fix formatting in bpftool-link documentationQuentin Monnet
Fix a formatting error in the documentation for bpftool-link, so that the man page can build correctly. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200904161454.31135-2-quentin@isovalent.com
2020-08-25bpf: Implement bpf_local_storage for inodesKP Singh
Similar to bpf_local_storage for sockets, add local storage for inodes. The life-cycle of storage is managed with the life-cycle of the inode. i.e. the storage is destroyed along with the owning inode. The BPF LSM allocates an __rcu pointer to the bpf_local_storage in the security blob which are now stackable and can co-exist with other LSMs. Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200825182919.1118197-6-kpsingh@chromium.org
2020-08-01tools/bpftool: Add documentation and bash-completion for `link detach`Andrii Nakryiko
Add info on link detach sub-command to man page. Add detach to bash-completion as well. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com. Link: https://lore.kernel.org/bpf/20200731182830.286260-6-andriin@fb.com
2020-07-25tools/bpftool: Add bpftool support for bpf map element iteratorYonghong Song
The optional parameter "map MAP" can be added to "bpftool iter" command to create a bpf iterator for map elements. For example, bpftool iter pin ./prog.o /sys/fs/bpf/p1 map id 333 For map element bpf iterator "map MAP" parameter is required. Otherwise, bpf link creation will return an error. Quentin Monnet kindly provided bash-completion implementation for new "map MAP" option. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723184119.590799-1-yhs@fb.com
2020-07-17tools/bpftool: Add name mappings for SK_LOOKUP prog and attach typeJakub Sitnicki
Make bpftool show human-friendly identifiers for newly introduced program and attach type, BPF_PROG_TYPE_SK_LOOKUP and BPF_SK_LOOKUP, respectively. Also, add the new prog type bash-completion, man page and help message. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200717103536.397595-14-jakub@cloudflare.com
2020-07-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-07-04 The following pull-request contains BPF updates for your *net-next* tree. We've added 73 non-merge commits during the last 17 day(s) which contain a total of 106 files changed, 5233 insertions(+), 1283 deletions(-). The main changes are: 1) bpftool ability to show PIDs of processes having open file descriptors for BPF map/program/link/BTF objects, relying on BPF iterator progs to extract this info efficiently, from Andrii Nakryiko. 2) Addition of BPF iterator progs for dumping TCP and UDP sockets to seq_files, from Yonghong Song. 3) Support access to BPF map fields in struct bpf_map from programs through BTF struct access, from Andrey Ignatov. 4) Add a bpf_get_task_stack() helper to be able to dump /proc/*/stack via seq_file from BPF iterator progs, from Song Liu. 5) Make SO_KEEPALIVE and related options available to bpf_setsockopt() helper, from Dmitry Yakunin. 6) Optimize BPF sk_storage selection of its caching index, from Martin KaFai Lau. 7) Removal of redundant synchronize_rcu()s from BPF map destruction which has been a historic leftover, from Alexei Starovoitov. 8) Several improvements to test_progs to make it easier to create a shell loop that invokes each test individually which is useful for some CIs, from Jesper Dangaard Brouer. 9) Fix bpftool prog dump segfault when compiled without skeleton code on older clang versions, from John Fastabend. 10) Bunch of cleanups and minor improvements, from various others. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-22tools/bpftool: Add documentation and sample output for process infoAndrii Nakryiko
Add statements about bpftool being able to discover process info, holding reference to BPF map, prog, link, or BTF. Show example output as well. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20200619231703.738941-10-andriin@fb.com
2020-06-17tools, bpftool: Add ringbuf map type to map command docsTobias Klauser
Commit c34a06c56df7 ("tools/bpftool: Add ringbuf map to a list of known map types") added the symbolic "ringbuf" name. Document it in the bpftool map command docs and usage as well. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200616113303.8123-1-tklauser@distanz.ch
2020-05-19bpf, bpftool: Enable get{peer, sock}name attach typesDaniel Borkmann
Make bpftool aware and add the new get{peer,sock}name attach types to its cli, documentation and bash completion to allow attachment/detachment of sock_addr programs there. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Andrey Ignatov <rdna@fb.com> Link: https://lore.kernel.org/bpf/9765b3d03e4c29210c4df56a9cc7e52f5f7bb5ef.1589841594.git.daniel@iogearbox.net
2020-05-11tools, bpftool: Minor fixes for documentationQuentin Monnet
Bring minor improvements to bpftool documentation. Fix or harmonise formatting, update map types (including in interactive help), improve description for "map create", fix a build warning due to a missing line after the double-colon for the "bpftool prog profile" example, complete/harmonise/sort the list of related bpftool man pages in footers. v2: - Remove (instead of changing) mark-up on "value" in bpftool-map.rst, when it does not refer to something passed on the command line. - Fix an additional typo ("hexadeximal") in the same file. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200511161536.29853-3-quentin@isovalent.com
2020-05-09tools/bpftool: Add bpf_iter support for bptoolYonghong Song
Currently, only one command is supported bpftool iter pin <bpf_prog.o> <path> It will pin the trace/iter bpf program in the object file <bpf_prog.o> to the <path> where <path> should be on a bpffs mount. For example, $ bpftool iter pin ./bpf_iter_ipv6_route.o \ /sys/fs/bpf/my_route User can then do a `cat` to print out the results: $ cat /sys/fs/bpf/my_route fe800000000000000000000000000000 40 00000000000000000000000000000000 ... 00000000000000000000000000000000 00 00000000000000000000000000000000 ... 00000000000000000000000000000001 80 00000000000000000000000000000000 ... fe800000000000008c0162fffebdfd57 80 00000000000000000000000000000000 ... ff000000000000000000000000000000 08 00000000000000000000000000000000 ... 00000000000000000000000000000000 00 00000000000000000000000000000000 ... The implementation for ipv6_route iterator is in one of subsequent patches. This patch also added BPF_LINK_TYPE_ITER to link query. In the future, we may add additional parameters to pin command by parameterizing the bpf iterator. For example, a map_id or pid may be added to let bpf program only traverses a single map or task, similar to kernel seq_file single_open(). We may also add introspection command for targets/iterators by leveraging the bpf_iter itself. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200509175920.2477247-1-yhs@fb.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 15:46:02 +0000