| Age | Commit message (Collapse) | Author |
|---|
|
Add new driver version to support tas2563 & tas2781 qfn chip
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20241104100055.48-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
Add calibration related kcontrol for speaker impedance calibration and
speaker leakage check for Chromebook.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240911232739.1509-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The tas2781-i2c driver gets an IRQ from either ACPI or device tree,
then proceeds to check if the IRQ has a corresponding GPIO and in
case it does enforce the GPIO as input and set a label on it.
This is abuse of the API:
- First we cannot guarantee that the numberspaces of the GPIOs and
the IRQs are the same, i.e that an IRQ number corresponds to
a GPIO number like that.
- Second, GPIO chips and IRQ chips should be treated as orthogonal
APIs, the irqchip needs to ascertain that the backing GPIO line
is set to input etc just using the irqchip.
- Third it is using the legacy <linux/gpio.h> API which should not
be used in new code yet this was added just a year ago.
Delete the offending code.
If this creates problems the GPIO and irqchip maintainers can help
to fix the issues.
It *should* not create any problems, because the irq isn't
used anywhere in the driver, it's just obtained and then
left unused.
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20240807-asoc-tas-gpios-v2-1-bd0f2705d58b@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This function has a reversed if statement so it's either a no-op or it
leads to a NULL dereference.
Fixes: b195acf5266d ("ASoC: tas2781: Fix wrong loading calibrated data sequence")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/18a29b68-cc85-4139-b7c7-2514e8409a42@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
broken alignment
Use get_unaligned_be16 instead of be16_to_cpup and get_unaligned_be32
instead of be32_to_cpup for potentially broken alignment.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240707083011.98-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In only loading RCA (Reconfigurable Architecture) binary case, no DSP
program will be working inside tas2563/tas2781, that is dsp-bypass mode,
do not support speaker protection, or audio acoustic algorithms in this
mode.
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240614133646.910-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Calibrated data will be set to default after loading DSP config params,
which will cause speaker protection work abnormally. Reload calibrated
data after loading DSP config params. Remove declaration of unused API
which load calibrated data in wrong sequence, changed the copyright year
and correct file name in license
header.
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240518141546.1742-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix a warning reported by robot kernel test that 'fw_entry' in function
'tas2781_load_calibration' is used uninitialized with compiler
sh4-linux-gcc (GCC) 13.2.0, an update of copyright and a correction of the
comments.
Fixes: ef3bcde75d06 ("ASoc: tas2781: Add tas2781 driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20240505122346.1326-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The pointer 'data' being initialized with a value that is never read, it
is being re-assigned inside a while-loop. The initialization is redundant
and can be removed.
Cleans up clang scan build warning
sound/soc/codecs/tas2781-fmwlib.c:1534:17: warning: Value stored to
'data' during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://msgid.link/r/20240216142219.2109050-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.8
This is a relatively quiet release, there's a lot of driver specific
changes and the usual high level of activity in the SOF core but the
one big core change was Mormioto-san's work to support more N:M
CPU:CODEC mapping cases. Highlights include:
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2.
- Support for falling back to older SOF IPC versions where firmware for
new versions is not available.
- Support for notification of control changes generated by SOF firmware
with IPC4.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases).
- ACPI parsing support for the ES83xx driver, reducing the number of
quirks neede for x86 systems.
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100.
- Removal of Freescale MPC8610 support, the SoC is no longer supported
by Linux.
|
|
Layout of FW version 0x0503 is compatible with 0x0502.
Already supported by TI's tas2781-linux-driver tree.
https://git.ti.com/cgit/tas2781-linux-drivers/tas2781-linux-driver/
Fixes: 915f5eadebd2 ("ASoC: tas2781: firmware lib")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://msgid.link/r/98d4ee4e01e834af72a1a0bea6736facf43582e0.1702513517.git.soyer@irl.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add additional checks for program/config numbers to avoid loading from
invalid addresses.
If prm_no/cfg_no is negative, skip uploading program/config.
The tas2781-hda driver caused a NULL pointer dereference after loading
module, and before first runtime_suspend.
the state was:
tas_priv->cur_conf = -1;
tas_priv->tasdevice[i].cur_conf = 0;
program = &(tas_fmw->programs[-1]);
BUG: kernel NULL pointer dereference, address: 0000000000000010
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x171/0x4e0
? vprintk_emit+0x175/0x2b0
? exc_page_fault+0x7f/0x180
? asm_exc_page_fault+0x26/0x30
? tasdevice_load_block_kernel+0x21/0x310 [snd_soc_tas2781_fmwlib]
tasdevice_select_tuningprm_cfg+0x268/0x3a0 [snd_soc_tas2781_fmwlib]
tasdevice_tuning_switch+0x69/0x710 [snd_soc_tas2781_fmwlib]
tas2781_hda_playback_hook+0xd4/0x110 [snd_hda_scodec_tas2781_i2c]
Fixes: 915f5eadebd2 ("ASoC: tas2781: firmware lib")
CC: <stable@vger.kernel.org>
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://msgid.link/r/523780155bfdca9bc0acd39efc79ed039454818d.1702591356.git.soyer@irl.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Don't populate the const read-only array magic_number on the stack,
instead make it static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20231017170436.176615-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
fixed m68k compiling issue: mapping table can save code field; storing the
dev_idx as a member of block can reduce unnecessary time and system
resource comsumption of dev_idx mapping every time the block data writing
to the dsp.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20231002090434.1896-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Return -EINVAL instead of success on this error path.
Fixes: 915f5eadebd2 ("ASoC: tas2781: firmware lib")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/Message-Id: <729bb6b3-bc1d-4b3d-8b65-077a492c753c@moroto.mountain>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a spelling mistake in a dev_err message. Fix it. Also fix
grammar and add space between last word and (%d)".
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20230620095620.2522058-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Create tas2781 firmware lib.
Signed-off-by: Shenghao Ding <13916275206@139.com>
Link: https://lore.kernel.org/r/20230618122819.23143-2-13916275206@139.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
