| Age | Commit message (Collapse) | Author |
|---|
|
For each binary Debian package, a directory with the package name is
created in the debian directory. Correct the generated file matches in the
package's clean target, which were renamed without adjusting the target.
Fixes: 1694e94e4f46 ("builddeb: match temporary directory name to the package name")
Signed-off-by: Bastian Germann <bage@linutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
No need to call chmod three times when it can do everything at once.
Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit 80f8be7af03f ("tomoyo: Omit use of bin2c") removed the last
use of bin2c.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
|
|
In the follow-up of commit fb3041d61f68 ("kbuild: fix SIGPIPE error
message for AR=gcc-ar and AR=llvm-ar"), Kees Cook pointed out that
tools should _not_ catch their own SIGPIPEs [1] [2].
Based on his feedback, LLVM was fixed [3].
However, Python's default behavior is to show noisy bracktrace when
SIGPIPE is sent. So, scripts written in Python are basically in the
same situation as the buggy llvm tools.
Example:
$ make -s allnoconfig
$ make -s allmodconfig
$ scripts/diffconfig .config.old .config | head -n1
-ALIX n
Traceback (most recent call last):
File "/home/masahiro/linux/scripts/diffconfig", line 132, in <module>
main()
File "/home/masahiro/linux/scripts/diffconfig", line 130, in main
print_config("+", config, None, b[config])
File "/home/masahiro/linux/scripts/diffconfig", line 64, in print_config
print("+%s %s" % (config, new_value))
BrokenPipeError: [Errno 32] Broken pipe
Python documentation [4] notes how to make scripts die immediately and
silently:
"""
Piping output of your program to tools like head(1) will cause a
SIGPIPE signal to be sent to your process when the receiver of its
standard output closes early. This results in an exception like
BrokenPipeError: [Errno 32] Broken pipe. To handle this case,
wrap your entry point to catch this exception as follows:
import os
import sys
def main():
try:
# simulate large output (your code replaces this loop)
for x in range(10000):
print("y")
# flush output here to force SIGPIPE to be triggered
# while inside this try block.
sys.stdout.flush()
except BrokenPipeError:
# Python flushes standard streams on exit; redirect remaining output
# to devnull to avoid another BrokenPipeError at shutdown
devnull = os.open(os.devnull, os.O_WRONLY)
os.dup2(devnull, sys.stdout.fileno())
sys.exit(1) # Python exits with error code 1 on EPIPE
if __name__ == '__main__':
main()
Do not set SIGPIPE’s disposition to SIG_DFL in order to avoid
BrokenPipeError. Doing that would cause your program to exit
unexpectedly whenever any socket connection is interrupted while
your program is still writing to it.
"""
Currently, tools/perf/scripts/python/intel-pt-events.py seems to be the
only script that fixes the issue that way.
tools/perf/scripts/python/compaction-times.py uses another approach
signal.signal(signal.SIGPIPE, signal.SIG_DFL) but the Python
documentation clearly says "Don't do it".
I cannot fix all Python scripts since there are so many.
I fixed some in the scripts/ directory.
[1]: https://lore.kernel.org/all/202211161056.1B9611A@keescook/
[2]: https://github.com/llvm/llvm-project/issues/59037
[3]: https://github.com/llvm/llvm-project/commit/4787efa38066adb51e2c049499d25b3610c0877b
[4]: https://docs.python.org/3/library/signal.html#note-on-sigpipe
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
Currently, these warnings are hidden with -Qunused-arguments in
KBUILD_CPPFLAGS. Once that option is removed, these warnings should be
turned into hard errors to make unconditionally added but unsupported
flags for the current compilation mode or target obvious due to a failed
build; otherwise, the warnings might just be ignored if the build log is
not checked.
Link: https://github.com/ClangBuiltLinux/linux/issues/1587
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
as-instr uses KBUILD_AFLAGS, but as-option uses KBUILD_CFLAGS. This can
cause as-option to fail unexpectedly when CONFIG_WERROR is set, because
clang will emit -Werror,-Wunused-command-line-argument for various -m
and -f flags in KBUILD_CFLAGS for assembler sources.
Callers of as-option and as-instr should be adding flags to
KBUILD_AFLAGS / aflags-y, not KBUILD_CFLAGS / cflags-y. Use
KBUILD_AFLAGS in all macros to clear up the initial problem.
Unfortunately, -Wunused-command-line-argument can still be triggered
with clang by the presence of warning flags or macro definitions because
'-x assembler' is used, instead of '-x assembler-with-cpp', which will
consume these flags. Switch to '-x assembler-with-cpp' in places where
'-x assembler' is used, as the compiler is always used as the driver for
out of line assembler sources in the kernel.
Finally, add -Werror to these macros so that they behave consistently
whether or not CONFIG_WERROR is set.
[nathan: Reworded and expanded on problems in commit message
Use '-x assembler-with-cpp' in a couple more places]
Link: https://github.com/ClangBuiltLinux/linux/issues/1699
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The default INSTALL_MOD_DIR of using the /lib/modules/$(uname -r)/extra
directory for external modules assumes distributions will have something
like /etc/depmod.d/dist.conf with:
search updates extra built-in
However, only some Red Hat releases have and use the "extra" stuff for
years now. Meanwhile, the depmod.c tool in kmod has *forever* used
the "updates" directory as part of the search path by default *if*
your distribution does not have any depmod.d configuration.
If you compile and install an external module today, even upstream
kernel mock drivers (tools/testing/cxl) the modules_install target
will pick up the new drivers but will not allow override of drivers
from updates to override built-in ones.
Since module-init-tools was deprecated over 11 years ago and now kmod
has since its inception used the "updates" directory as part of its
default search path to allow overrides, and since the "extra" stuff
was in practice only used by Red Hat stuff, use the more distro
agnostic override path "updates" to allow external modules to
also override proper production kernel modules.
This would allow mocking drivers tools to not have to muck with
depmod.d config files or assume that your distro will have extra
on a configuration file over built-in.
With today's default you end up actually *crashing* Linux when
trying to load cxl_test with the default "extra" [0] directory being
used. This fixes that and allows other mocking drivers to do
less work.
[0] https://lkml.kernel.org/r/20221209062919.1096779-1-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
The gimple-iterator.h header must be included before gimple-fold.h
starting with GCC 13. Reorganize gimple headers to work for all GCC
versions.
Reported-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/all/20230113173033.4380-1-palmer@rivosinc.com/
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
So far this function was only used locally in powerpc, some other
architectures might benefit from it. Move it into
scripts/Makefile.defconf.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230124110213.3221264-10-alexander.stein@ew.tq-group.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The instructions for the ftrace-bisect.sh script, which is used to find
what function is being traced that is causing a kernel crash, and possibly
a triple fault reboot, uses the old method. In 5.1, a new feature was
added that let the user write in the index into available_filter_functions
that maps to the function a user wants to set in set_ftrace_filter (or
set_ftrace_notrace). This takes O(1) to set, as suppose to writing a
function name, which takes O(n) (where n is the number of functions in
available_filter_functions).
The ftrace-bisect.sh requires setting half of the functions in
available_filter_functions, which is O(n^2) using the name method to enable
and can take several minutes to complete. The number method is O(n) which
takes less than a second to complete. Using the number method for any
kernel 5.1 and after is the proper way to do the bisect.
Update the usage to reflect the new change, as well as using the
/sys/kernel/tracing path instead of the obsolete debugfs path.
Link: https://lkml.kernel.org/r/20230123112252.022003dd@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Fixes: f79b3f338564e ("ftrace: Allow enabling of filters via index of available_filter_functions")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
$(tmp-target) is a better fit for local use like this.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
scripts/ is a better place to generate files used treewide.
With target.json moved to scripts/, you do not need to add target.json
to no-clean-files or MRPROPER_FILES.
'make clean' does not visit scripts/, but 'make mrproper' does.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
|
|
fixdep is designed only for parsing text files. read_file() appends
a terminating null byte ('\0') and parse_config_file() calls strstr()
to search for CONFIG options.
rustc outputs *.rlib, *.rmeta, *.so to dep-info. fixdep needs them in
the dependency, but there is no point in parsing such binary files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The dep files (*.d files) emitted by C compilers usually contain the
deduplicated list of included files.
One exceptional case is when a header is included by the -include
command line option, and also by #include directive.
For example, the top Makefile adds the command line option,
"-include $(srctree)/include/linux/kconfig.h". You do not need to
include <linux/kconfig.h> in every source file.
In fact, include/linux/kconfig.h is listed twice in many .*.cmd files
due to include/linux/xarray.h having "#include <linux/kconfig.h>".
I did not fix that since it is a small redundancy.
However, this is more annoying for rustc. rustc emits the dependency
for each emission type.
For example, cmd_rustc_library emits dep-info, obj, and metadata.
So, the emitted *.d file contains the dependency for those 3 targets,
which makes fixdep parse the same file 3 times.
$ grep rust/alloc/raw_vec.rs rust/.alloc.o.cmd
rust/alloc/raw_vec.rs \
rust/alloc/raw_vec.rs \
rust/alloc/raw_vec.rs \
To skip the second parsing, this commit adds a hash table for parsed
files, just like we did for CONFIG options.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
|
|
Change the hash table code so it will be easier to add the second table.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
|
|
rustc may put comments in dep-info, so sed is used to drop them before
passing it to fixdep.
Now that fixdep can remove comments, Makefiles do not need to run sed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
|
|
fixdep parses dependency files (*.d) emitted by the compiler.
*.d files are Makefiles describing the dependencies of the main source
file.
fixdep understands minimal Makefile syntax. It works well enough for
GCC and Clang, but not for rustc.
This commit improves the parser a little more for better processing
comments, escape sequences, etc.
My main motivation is to drop comments. rustc may output comments
(e.g. env-dep). Currentyly, rustc build rules invoke sed to remove
comments, but it is more efficient to do it in fixdep.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
|
|
In Kbuild, two different rules must not write to the same file, but
it happens when compiling rust source files.
For example, set CONFIG_SAMPLE_RUST_MINIMAL=m and run the following:
$ make -j$(nproc) samples/rust/rust_minimal.o samples/rust/rust_minimal.rsi \
samples/rust/rust_minimal.s samples/rust/rust_minimal.ll
[snip]
RUSTC [M] samples/rust/rust_minimal.o
RUSTC [M] samples/rust/rust_minimal.rsi
RUSTC [M] samples/rust/rust_minimal.s
RUSTC [M] samples/rust/rust_minimal.ll
mv: cannot stat 'samples/rust/rust_minimal.d': No such file or directory
make[3]: *** [scripts/Makefile.build:334: samples/rust/rust_minimal.ll] Error 1
make[3]: *** Waiting for unfinished jobs....
mv: cannot stat 'samples/rust/rust_minimal.d': No such file or directory
make[3]: *** [scripts/Makefile.build:309: samples/rust/rust_minimal.o] Error 1
mv: cannot stat 'samples/rust/rust_minimal.d': No such file or directory
make[3]: *** [scripts/Makefile.build:326: samples/rust/rust_minimal.s] Error 1
make[2]: *** [scripts/Makefile.build:504: samples/rust] Error 2
make[1]: *** [scripts/Makefile.build:504: samples] Error 2
make: *** [Makefile:2008: .] Error 2
The reason for the error is that 4 threads running in parallel renames
the same file, samples/rust/rust_minimal.d.
This does not happen when compiling C or assembly files because
-Wp,-MMD,$(depfile) explicitly specifies the dependency filepath.
$(depfile) is a unique path for each target.
Currently, rustc is only given --out-dir and --emit=<list-of-types>
So, all the rust build rules output the dep-info into the default
<CRATE_NAME>.d, which causes the path conflict.
Fortunately, the --emit option is able to specify the output path
individually, with the form --emit=<type>=<path>.
Add --emit=dep-info=$(depfile) to the common part. Also, remove the
redundant --out-dir because the output path is specified for each type.
The code gets much cleaner because we do not need to rename *.d files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
|
|
Remove _host*_flags. No functional change is intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
|
|
cmd_dt_S_dtb and cmd_dt_S_dtbo are almost the same; the only difference
is the prefix of the begin/end symbols. (__dtb vs __dtbo)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
The cmd-check for KBUILD_NOCMDDEP=1 may not be clear until you see
commit c4d5ee13984f ("kbuild: make KBUILD_NOCMDDEP=1 handle empty
built-in.o").
When a phony target (i.e. FORCE) is the only prerequisite, Kbuild
uses a tricky way to detect that the target does not exist.
Add more comments.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
The cmd-check macro compares $(cmd_$@) and $(cmd_$1), but a pitfall is
that you cannot use cmd_<target> as the variable name for the command.
For example, the following code will not work in the top Makefile
or ./Kbuild.
quiet_cmd_foo = GEN $@
cmd_foo = touch $@
targets += foo
foo: FORCE
$(call if_changed,foo)
In this case, both $@ and $1 are expanded to 'foo', so $(cmd_check)
is always empty.
We do not need to use the same prefix for cmd_$@ and cmd_$1.
Rename the former to savedcmd_$@.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
The top .gitignore comments about how to detect files breaking
.gitignore rules, but people rarely care about it.
Add a new W=1 warning to detect files that are tracked but ignored by
git. If git is not installed or the source tree is not tracked by git
at all, this script does not print anything.
Running it on v6.2-rc1 detected the following:
$ make W=1 misc-check
Documentation/devicetree/bindings/.yamllint: warning: ignored by one of the .gitignore files
drivers/clk/.kunitconfig: warning: ignored by one of the .gitignore files
drivers/gpu/drm/tests/.kunitconfig: warning: ignored by one of the .gitignore files
drivers/hid/.kunitconfig: warning: ignored by one of the .gitignore files
fs/ext4/.kunitconfig: warning: ignored by one of the .gitignore files
fs/fat/.kunitconfig: warning: ignored by one of the .gitignore files
kernel/kcsan/.kunitconfig: warning: ignored by one of the .gitignore files
lib/kunit/.kunitconfig: warning: ignored by one of the .gitignore files
mm/kfence/.kunitconfig: warning: ignored by one of the .gitignore files
tools/testing/selftests/arm64/tags/.gitignore: warning: ignored by one of the .gitignore files
tools/testing/selftests/arm64/tags/Makefile: warning: ignored by one of the .gitignore files
tools/testing/selftests/arm64/tags/run_tags_test.sh: warning: ignored by one of the .gitignore files
tools/testing/selftests/arm64/tags/tags_test.c: warning: ignored by one of the .gitignore files
These are ignored by the '.*' or 'tags' in the top .gitignore, but
there is no rule to negate it.
You might be tempted to do 'git add -f' but I want to have the real
issue fixed (by fixing a .gitignore, or by renaming files, etc.).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
More than one year has passed since the copied *.[cS] files were
removed from arch/*/boot/compressed/.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit a6de553da01c ("kbuild: Allow to combine multiple W= levels")
supported W=123 to enable all the extra warning groups.
I think a similar idea is applicable to the V= option.
V=1 echos the whole command
V=2 prints the reason for rebuilding
These are orthogonal, and can be enabled at the same time.
This commit supports V=12 to enable both of them.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
Some scripts increase the verbose level when V=1, but others when
not V=0.
I think the former is correct because V=2 is not a log level but
a switch to print the reason for rebuilding.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
"make V=1" prints the whole command instead of the short log, but I
think it is nicer to print both so that you can easily spot the build
rule of your interest.
This commit changes V=1 to print the short log (the line starts with
'#'), followed by the full log.
In parallel builds, the short/full logs from the same build rule may
be interspersed. If you want to avoid it, please add -Otarget option.
Kbuild will never set it by default because Make would buffer the logs
and lose the escape sequences. (Modern compilers print warnings and
errors in color, but only when they write to a terminal.)
This is also a preparation for supporting V=12 because V=2 appends the
reason for rebuilding to the short log.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
We need the char/misc driver fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Hide LDFLAGS_vmlinux from decompressor Makefiles to fix error
messages when GNU Make 4.4 is used.
- Fix 'make modules' build error when CONFIG_DEBUG_INFO_BTF_MODULES=y.
- Fix warnings emitted by GNU Make 4.4 in scripts/kconfig/Makefile.
- Support GNU Make 4.4 for scripts/jobserver-exec.
- Show clearer error message when kernel/gen_kheaders.sh fails due to
missing cpio.
* tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kheaders: explicitly validate existence of cpio command
scripts: support GNU make 4.4 in jobserver-exec
kconfig: Update all declared targets
scripts: rpm: make clear that mkspec script contains 4.13 feature
init/Kconfig: fix LOCALVERSION_AUTO help text
kbuild: fix 'make modules' error when CONFIG_DEBUG_INFO_BTF_MODULES=y
kbuild: export top-level LDFLAGS_vmlinux only to scripts/Makefile.vmlinux
init/version-timestamp.c: remove unneeded #include <linux/version.h>
docs: kbuild: remove mention to dropped $(objtree) feature
|
|
It's common for drivers that share same physical components to also
duplicate source code (or at least portions of it). A good example is
both drivers/gpu/drm/amdgpu/* and drivers/gpu/drm/radeon/* have a header
file called atombios.h.
While their contents aren't the same, a lot of their structs have
the exact same names which makes navigating through the code base a bit
messy as cscope will show up 'references' across drivers which aren't
exactly correct.
Add IGNORE_DIRS variable, which specifies which directories
to be ignored from indexing.
Example:
make ARCH=x86 IGNORE_DIRS="drivers/gpu/drm/radeon tools" cscope
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Vipin Sharma <vipinsh@google.com>
Link: https://lore.kernel.org/r/Y5jf59VCL/HAt60q@mail.google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Version 1.24 of pahole has the capability to exclude compilation units (CUs)
of specific languages [1] [2]. Rust, as of writing, is not currently supported
by pahole and if it's used with a build that has BTF debugging enabled it
results in malformed kernel and module binaries [3]. So it's better for pahole
to exclude Rust CUs until support for it arrives.
Co-developed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://git.kernel.org/pub/scm/devel/pahole/pahole.git/commit/?id=49358dfe2aaae4e90b072332c3e324019826783f [1]
Link: https://git.kernel.org/pub/scm/devel/pahole/pahole.git/commit/?id=8ee363790b7437283c53090a85a9fec2f0b0fbc4 [2]
Link: https://github.com/Rust-for-Linux/linux/issues/735 [3]
Link: https://lore.kernel.org/bpf/20230111152050.559334-1-yakoyoku@gmail.com
|
|
Starting with GNU make 4.4, --jobserver-auth newly uses named
pipe (fifo) instead of part of opened file descriptors:
https://www.gnu.org/software/make/manual/html_node/POSIX-Jobserver.html
Support also the new format.
Signed-off-by: Martin Liska <mliska@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening fixes from Kees Cook:
- Fix CFI hash randomization with KASAN (Sami Tolvanen)
- Check size of coreboot table entry and use flex-array
* tag 'hardening-v6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: Fix CFI hash randomization with KASAN
firmware: coreboot: Check size of table entry and use flex-array
|
|
Clang emits a asan.module_ctor constructor to each object file
when KASAN is enabled, and these functions are indirectly called
in do_ctors. With CONFIG_CFI_CLANG, the compiler also emits a CFI
type hash before each address-taken global function so they can
pass indirect call checks.
However, in commit 0c3e806ec0f9 ("x86/cfi: Add boot time hash
randomization"), x86 implemented boot time hash randomization,
which relies on the .cfi_sites section generated by objtool. As
objtool is run against vmlinux.o instead of individual object
files with X86_KERNEL_IBT (enabled by default), CFI types in
object files that are not part of vmlinux.o end up not being
included in .cfi_sites, and thus won't get randomized and trip
CFI when called.
Only .vmlinux.export.o and init/version-timestamp.o are linked
into vmlinux separately from vmlinux.o. As these files don't
contain any functions, disable KASAN for both of them to avoid
breaking hash randomization.
Link: https://github.com/ClangBuiltLinux/linux/issues/1742
Fixes: 0c3e806ec0f9 ("x86/cfi: Add boot time hash randomization")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230112224948.1479453-2-samitolvanen@google.com
|
|
Currently qconf-cfg.sh is the only script that touches the "-bin"
target, even though all of the conf_cfg rules declare that they do.
Make the recipe unconditionally touch all declared targets to avoid
incompatibilities with upcoming versions of GNU make:
https://lists.gnu.org/archive/html/info-gnu/2022-10/msg00008.html
e.g.
scripts/kconfig/Makefile:215: warning: pattern recipe did not update peer target 'scripts/kconfig/nconf-bin'.
scripts/kconfig/Makefile:215: warning: pattern recipe did not update peer target 'scripts/kconfig/mconf-bin'.
scripts/kconfig/Makefile:215: warning: pattern recipe did not update peer target 'scripts/kconfig/gconf-bin'.
Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The ability to subscript match result as an array is only available
since python 3.6. Existing code in bpf_doc uses the older group()
interface but commit 8a76145a2ec2 adds code using the new interface.
Use the old interface consistently to avoid build error on older
distributions like the below:
+ make -j48 -s -C /dev/shm/kbuild/linux.33946/current ARCH=powerpc HOSTCC=gcc CROSS_COMPILE=powerpc64-suse-linux- clean
TypeError: '_sre.SRE_Match' object is not subscriptable
Fixes: 8a76145a2ec2 ("bpf: explicitly define BPF_FUNC_xxx integer values")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230109113442.20946-1-msuchanek@suse.de
|
|
A fix was made in the mkspec script that uses a feature, ie. the
OR expression, which requires RPM 4.13. However, the script indicates
another minimum version. Lower versions may have success by using
the --no-deps option as suggested, but feels like bumping the version
to 4.13 is reasonable as it put me on the wrong track at first with
RPM 4.11 on my Centos7 machine.
Fixes: 02a893bc9975 ("kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires")
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Now that x86 boot code is not hardcoded to the particular linking
order, remove x86 files from the list and let them be placed inside
the vmlinux according only to the linker script and linker
preferences.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230109170403.4117105-3-alexandr.lobakin@intel.com
|
|
Commit 63ffe00d8c93 ("kbuild: Fix running modpost with musl libc")
accidentally turned the unresolved symbol warnings into errors when
vmlinux.o (for in-tree builds) or Module.symver (for external module
builds) is missing.
In those cases, unresolved symbols are expected, but the -w option
is not set because 'missing-input' is referenced before set.
Move $(missing-input) back to the original place. This should be fine
for musl libc because vmlinux.o and -w are not added at the same time.
With this change, -w may be passed twice, but it is not a big deal.
Link: https://lore.kernel.org/all/b56a03b8-2a2a-f833-a5d2-cdc50a7ca2bb@cschramm.eu/
Fixes: 63ffe00d8c93 ("kbuild: Fix running modpost with musl libc")
Reported-by: Christopher Schramm <debian@cschramm.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Samuel Holland <samuel@sholland.org>
|
|
This is unneeded since commit 69304379ff03 ("fixdep: use fflush() and
ferror() to ensure successful write to files").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Guoqing Jiang reports that openSUSE cannot compile the kernel rpm due
to "BuildRequires: elfutils-libelf-devel" added by commit 8818039f959b
("kbuild: add ability to make source rpm buildable using koji").
The relevant package name in openSUSE is libelf-devel.
Add it as an alternative package.
BTW, if it is impossible to solve the build requirement, the final
resort would be:
$ make RPMOPTS=--nodeps rpm-pkg
This passes --nodeps to the rpmbuild command so it will not verify
build dependencies. This is useful to test rpm builds on non-rpm
system. On Debian/Ubuntu, for example, you can install rpmbuild by
'apt-get install rpm'.
NOTE1:
Likewise, it is possible to bypass the build dependency check for
debian package builds:
$ make DPKG_FLAGS=-d deb-pkg
NOTE2:
The 'or' operator is supported since RPM 4.13. So, old distros such
as CentOS 7 will break. I suggest installing newer rpmbuild in such
cases.
Link: https://lore.kernel.org/linux-kbuild/ee227d24-9c94-bfa3-166a-4ee6b5dfea09@linux.dev/T/#u
Fixes: 8818039f959b ("kbuild: add ability to make source rpm buildable using koji")
Reported-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
|
|
commit 3d57e1b7b1d4 ("kbuild: refactor the prerequisites of the modpost
rule") moved 'vmlinux.o' inside modpost-args, possibly before some of
the other options. However, getopt() in musl libc follows POSIX and
stops looking for options upon reaching the first non-option argument.
As a result, the '-T' option is misinterpreted as a positional argument,
and the build fails:
make -f ./scripts/Makefile.modpost
scripts/mod/modpost -E -o Module.symvers vmlinux.o -T modules.order
-T: No such file or directory
make[1]: *** [scripts/Makefile.modpost:137: Module.symvers] Error 1
make: *** [Makefile:1960: modpost] Error 2
The fix is to move all options before 'vmlinux.o' in modpost-args.
Fixes: 3d57e1b7b1d4 ("kbuild: refactor the prerequisites of the modpost rule")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The help message line for building the source RPM package was missing.
Added it.
Signed-off-by: Jun ASAKA <JunASAKA@zzy040330.moe>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Add few static text to explain how one can bring up the search dialog
box by pressing the forward slash key anywhere on this interface.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
A common practice is to grep for "WARNING" or "ERROR" text in the report
output from a Coccinelle semantic patch script. So, include the text
"WARNING: " in the report output generated by the semantic patch for
desired filtering of the output. Also improves the readability of the
output. Here is an example of the old and new outputs reported:
xyz_file.c:131:39-40: atomic_add_unless
xyz_file.c:131:39-40: WARNING: atomic_add_unless
xyz_file.c:196:6-25: atomic_dec_and_test variation before object free at line 208.
xyz_file.c:196:6-25: WARNING: atomic_dec_and_test variation before object free at line 208.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Acked-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccicheck update from Julia Lawall:
"Modernize use of grep in coccicheck:
Use 'grep -E' instead of 'egrep'"
* tag 'coccinelle-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
scripts: coccicheck: use "grep -E" instead of "egrep"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support zstd-compressed debug info
- Allow W=1 builds to detect objects shared among multiple modules
- Add srcrpm-pkg target to generate a source RPM package
- Make the -s option detection work for future GNU Make versions
- Add -Werror to KBUILD_CPPFLAGS when CONFIG_WERROR=y
- Allow W=1 builds to detect -Wundef warnings in any preprocessed files
- Raise the minimum supported version of binutils to 2.25
- Use $(intcmp ...) to compare integers if GNU Make >= 4.4 is used
- Use $(file ...) to read a file if GNU Make >= 4.2 is used
- Print error if GNU Make older than 3.82 is used
- Allow modpost to detect section mismatches with Clang LTO
- Include vmlinuz.efi into kernel tarballs for arm64 CONFIG_EFI_ZBOOT=y
* tag 'kbuild-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits)
buildtar: fix tarballs with EFI_ZBOOT enabled
modpost: Include '.text.*' in TEXT_SECTIONS
padata: Mark padata_work_init() as __ref
kbuild: ensure Make >= 3.82 is used
kbuild: refactor the prerequisites of the modpost rule
kbuild: change module.order to list *.o instead of *.ko
kbuild: use .NOTINTERMEDIATE for future GNU Make versions
kconfig: refactor Makefile to reduce process forks
kbuild: add read-file macro
kbuild: do not sort after reading modules.order
kbuild: add test-{ge,gt,le,lt} macros
Documentation: raise minimum supported version of binutils to 2.25
kbuild: add -Wundef to KBUILD_CPPFLAGS for W=1 builds
kbuild: move -Werror from KBUILD_CFLAGS to KBUILD_CPPFLAGS
kbuild: Port silent mode detection to future gnu make.
init/version.c: remove #include <generated/utsrelease.h>
firmware_loader: remove #include <generated/utsrelease.h>
modpost: Mark uuid_le type to be suitable only for MEI
kbuild: add ability to make source rpm buildable using koji
kbuild: warn objects shared among multiple modules
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Switch to relative exception tables
- Add unaligned access support
- Add alternative runtime patching mechanism
- Add FDT booting support from efi system table
- Add suspend/hibernation (ACPI S3/S4) support
- Add basic STACKPROTECTOR support
- Add ftrace (function tracer) support
- Update the default config file
* tag 'loongarch-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (24 commits)
LoongArch: Update Loongson-3 default config file
LoongArch: modules/ftrace: Initialize PLT at load time
LoongArch/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support
LoongArch/ftrace: Add HAVE_DYNAMIC_FTRACE_WITH_ARGS support
LoongArch/ftrace: Add HAVE_DYNAMIC_FTRACE_WITH_REGS support
LoongArch/ftrace: Add dynamic function graph tracer support
LoongArch/ftrace: Add dynamic function tracer support
LoongArch/ftrace: Add recordmcount support
LoongArch/ftrace: Add basic support
LoongArch: module: Use got/plt section indices for relocations
LoongArch: Add basic STACKPROTECTOR support
LoongArch: Add hibernation (ACPI S4) support
LoongArch: Add suspend (ACPI S3) support
LoongArch: Add processing ISA Node in DeviceTree
LoongArch: Add FDT booting support from efi system table
LoongArch: Use alternative to optimize libraries
LoongArch: Add alternative runtime patching mechanism
LoongArch: Add unaligned access support
LoongArch: BPF: Add BPF exception tables
LoongArch: Remove the .fixup section usage
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add powerpc qspinlock implementation optimised for large system
scalability and paravirt. See the merge message for more details
- Enable objtool to be built on powerpc to generate mcount locations
- Use a temporary mm for code patching with the Radix MMU, so the
writable mapping is restricted to the patching CPU
- Add an option to build the 64-bit big-endian kernel with the ELFv2
ABI
- Sanitise user registers on interrupt entry on 64-bit Book3S
- Many other small features and fixes
Thanks to Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn
Helgaas, Bo Liu, Chen Lifu, Christoph Hellwig, Christophe JAILLET,
Christophe Leroy, Christopher M. Riedl, Colin Ian King, Deming Wang,
Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven, Gustavo A.
R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol
Jain, Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin,
Pali Rohár, Randy Dunlap, Rohan McLure, Russell Currey, Sathvika
Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas
Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng,
XueBing Chen, Yang Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu,
and Wolfram Sang.
* tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (181 commits)
powerpc/code-patching: Fix oops with DEBUG_VM enabled
powerpc/qspinlock: Fix 32-bit build
powerpc/prom: Fix 32-bit build
powerpc/rtas: mandate RTAS syscall filtering
powerpc/rtas: define pr_fmt and convert printk call sites
powerpc/rtas: clean up includes
powerpc/rtas: clean up rtas_error_log_max initialization
powerpc/pseries/eeh: use correct API for error log size
powerpc/rtas: avoid scheduling in rtas_os_term()
powerpc/rtas: avoid device tree lookups in rtas_os_term()
powerpc/rtasd: use correct OF API for event scan rate
powerpc/rtas: document rtas_call()
powerpc/pseries: unregister VPA when hot unplugging a CPU
powerpc/pseries: reset the RCU watchdogs after a LPM
powerpc: Take in account addition CPU node when building kexec FDT
powerpc: export the CPU node count
powerpc/cpuidle: Set CPUIDLE_FLAG_POLLING for snooze state
powerpc/dts/fsl: Fix pca954x i2c-mux node names
cxl: Remove unnecessary cxl_pci_window_alignment()
selftests/powerpc: Fix resource leaks
...
|
|
When CONFIG_EFI_ZBOOT is enabled, the binary name is not Image.gz
anymore but vmlinuz.efi. No vmlinuz gets put into the tarball as the
buildtar script doesn't recognize this name. Remedy this by adding the
binary name to the list of acceptable files to package.
Reported-by: CKI Project <cki-project@redhat.com>
Signed-off-by: Veronika Kabatova <vkabatov@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
