| Age | Commit message (Collapse) | Author |
|---|
|
commit 43fc0a99906e04792786edf8534d8d58d1e9de0c upstream.
After commit feb843a469fb ("kbuild: add $(CLANG_FLAGS) to
KBUILD_CPPFLAGS"), there is an error while building certain PowerPC
assembly files with clang:
arch/powerpc/lib/copypage_power7.S: Assembler messages:
arch/powerpc/lib/copypage_power7.S:34: Error: junk at end of line: `0b01000'
arch/powerpc/lib/copypage_power7.S:35: Error: junk at end of line: `0b01010'
arch/powerpc/lib/copypage_power7.S:37: Error: junk at end of line: `0b01000'
arch/powerpc/lib/copypage_power7.S:38: Error: junk at end of line: `0b01010'
arch/powerpc/lib/copypage_power7.S:40: Error: junk at end of line: `0b01010'
clang: error: assembler command failed with exit code 1 (use -v to see invocation)
as-option only uses KBUILD_AFLAGS, so after removing CLANG_FLAGS from
KBUILD_AFLAGS, there is no more '--target=' or '--prefix=' flags. As a
result of those missing flags, the host target
will be tested during as-option calls and likely fail, meaning necessary
flags may not get added when building assembly files, resulting in
errors like seen above.
Add KBUILD_CPPFLAGS to as-option invocations to clear up the errors.
This should have been done in commit d5c8d6e0fa61 ("kbuild: Update
assembler calls to use proper flags and language target"), which
switched from using the assembler target to the assembler-with-cpp
target, so flags that affect preprocessing are passed along in all
relevant tests. as-option now mirrors cc-option.
Fixes: feb843a469fb ("kbuild: add $(CLANG_FLAGS) to KBUILD_CPPFLAGS")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/CA+G9fYs=koW9WardsTtora+nMgLR3raHz-LSLr58tgX4T5Mxag@mail.gmail.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cff6e7f50bd315e5b39c4e46c704ac587ceb965f upstream.
A future change will move CLANG_FLAGS from KBUILD_{A,C}FLAGS to
KBUILD_CPPFLAGS so that '--target' is available while preprocessing.
When that occurs, the following errors appear multiple times when
building ARCH=powerpc powernv_defconfig:
ld.lld: error: vmlinux.a(arch/powerpc/kernel/head_64.o):(.text+0x12d4): relocation R_PPC64_ADDR16_HI out of range: -4611686018409717520 is not in [-2147483648, 2147483647]; references '__start___soft_mask_table'
ld.lld: error: vmlinux.a(arch/powerpc/kernel/head_64.o):(.text+0x12e8): relocation R_PPC64_ADDR16_HI out of range: -4611686018409717392 is not in [-2147483648, 2147483647]; references '__stop___soft_mask_table'
Diffing the .o.cmd files reveals that -DHAVE_AS_ATHIGH=1 is not present
anymore, because as-instr only uses KBUILD_AFLAGS, which will no longer
contain '--target'.
Mirror Kconfig's as-instr and add CLANG_FLAGS explicitly to the
invocation to ensure the target information is always present.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d5c8d6e0fa61401a729e9eb6a9c7077b2d3aebb0 upstream.
as-instr uses KBUILD_AFLAGS, but as-option uses KBUILD_CFLAGS. This can
cause as-option to fail unexpectedly when CONFIG_WERROR is set, because
clang will emit -Werror,-Wunused-command-line-argument for various -m
and -f flags in KBUILD_CFLAGS for assembler sources.
Callers of as-option and as-instr should be adding flags to
KBUILD_AFLAGS / aflags-y, not KBUILD_CFLAGS / cflags-y. Use
KBUILD_AFLAGS in all macros to clear up the initial problem.
Unfortunately, -Wunused-command-line-argument can still be triggered
with clang by the presence of warning flags or macro definitions because
'-x assembler' is used, instead of '-x assembler-with-cpp', which will
consume these flags. Switch to '-x assembler-with-cpp' in places where
'-x assembler' is used, as the compiler is always used as the driver for
out of line assembler sources in the kernel.
Finally, add -Werror to these macros so that they behave consistently
whether or not CONFIG_WERROR is set.
[nathan: Reworded and expanded on problems in commit message
Use '-x assembler-with-cpp' in a couple more places]
Link: https://github.com/ClangBuiltLinux/linux/issues/1699
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f757f6011c92b5a01db742c39149bed9e526478f ]
The script previously assumed --file was always the first argument,
which caused issues when it appeared later. This patch updates the
parsing logic to scan all arguments to find --file, sets the config
file correctly, and resets the argument list with the remaining
commands.
It also fixes --refresh to respect --file by passing KCONFIG_CONFIG=$FN
to make oldconfig.
Signed-off-by: Seyediman Seyedarab <imandevel@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a26fe287eed112b4e21e854f173c8918a6a8596d ]
The scripts/kconfig/merge_config.sh script requires an existing
$INITFILE (or the $1 argument) as a base file for merging Kconfig
fragments. However, an empty $INITFILE can serve as an initial starting
point, later referenced by the KCONFIG_ALLCONFIG Makefile variable
if -m is not used. This variable can point to any configuration file
containing preset config symbols (the merged output) as stated in
Documentation/kbuild/kconfig.rst. When -m is used $INITFILE will
contain just the merge output requiring the user to run make (i.e.
KCONFIG_ALLCONFIG=<$INITFILE> make <allnoconfig/alldefconfig> or make
olddefconfig).
Instead of failing when `$INITFILE` is missing, create an empty file and
use it as the starting point for merges.
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6ae0042f4d3f331e841495eb0a3d51598e593ec2 ]
Subshell evaluations are not exempt from errexit, so if a command is
not available, `which` will fail and exit the script as a whole.
This causes the helpful error messages to not be printed if they are
tacked on using a `$?` comparison.
Resolve the issue by using chains of logical operators, which are not
subject to the effects of errexit.
Fixes: e37c1877ba5b1 ("scripts/selinux: modernize mdp")
Signed-off-by: Tim Schumacher <tim.schumacher1@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 8f6629c004b193d23612641c3607e785819e97ab upstream.
-Wenum-enum-conversion was strengthened in clang-19 to warn for C, which
caused the kernel to move it to W=1 in commit 75b5ab134bb5 ("kbuild:
Move -Wenum-{compare-conditional,enum-conversion} into W=1") because
there were numerous instances that would break builds with -Werror.
Unfortunately, this is not a full solution, as more and more developers,
subsystems, and distributors are building with W=1 as well, so they
continue to see the numerous instances of this warning.
Since the move to W=1, there have not been many new instances that have
appeared through various build reports and the ones that have appeared
seem to be following similar existing patterns, suggesting that most
instances of this warning will not be real issues. The only alternatives
for silencing this warning are adding casts (which is generally seen as
an ugly practice) or refactoring the enums to macro defines or a unified
enum (which may be undesirable because of type safety in other parts of
the code).
Move the warning to W=2, where warnings that occur frequently but may be
relevant should reside.
Cc: stable@vger.kernel.org
Fixes: 75b5ab134bb5 ("kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1")
Link: https://lore.kernel.org/ZwRA9SOcOjjLJcpi@google.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit be2fa44b5180a1f021efb40c55fdf63c249c3209 ]
When a symbol that is already registered is read again from *.symref
file, __add_symbol() removes the previous one from the hash table without
freeing it.
[Test Case]
$ cat foo.c
#include <linux/export.h>
void foo(void);
void foo(void) {}
EXPORT_SYMBOL(foo);
$ cat foo.symref
foo void foo ( void )
foo void foo ( void )
When a symbol is removed from the hash table, it must be freed along
with its ->name and ->defn members. However, sym->name cannot be freed
because it is sometimes shared with node->string, but not always. If
sym->name and node->string share the same memory, free(sym->name) could
lead to a double-free bug.
To resolve this issue, always assign a strdup'ed string to sym->name.
Fixes: 64e6c1e12372 ("genksyms: track symbol checksum changes")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 45c9c4101d3d2fdfa00852274bbebba65fcc3cf2 ]
When a symbol that is already registered is added again, __add_symbol()
returns without freeing the symbol definition, making it unreachable.
The following test cases demonstrate different memory leak points.
[Test Case 1]
Forward declaration with exactly the same definition
$ cat foo.c
#include <linux/export.h>
void foo(void);
void foo(void) {}
EXPORT_SYMBOL(foo);
[Test Case 2]
Forward declaration with a different definition (e.g. attribute)
$ cat foo.c
#include <linux/export.h>
void foo(void);
__attribute__((__section__(".ref.text"))) void foo(void) {}
EXPORT_SYMBOL(foo);
[Test Case 3]
Preserving an overridden symbol (compile with KBUILD_PRESERVE=1)
$ cat foo.c
#include <linux/export.h>
void foo(void);
void foo(void) { }
EXPORT_SYMBOL(foo);
$ cat foo.symref
override foo void foo ( int )
The memory leaks in Test Case 1 and 2 have existed since the introduction
of genksyms into the kernel tree. [1]
The memory leak in Test Case 3 was introduced by commit 5dae9a550a74
("genksyms: allow to ignore symbol checksum changes").
When multiple init_declarators are reduced to an init_declarator_list,
the decl_spec must be duplicated. Otherwise, the following Test Case 4
would result in a double-free bug.
[Test Case 4]
$ cat foo.c
#include <linux/export.h>
extern int foo, bar;
int foo, bar;
EXPORT_SYMBOL(foo);
In this case, 'foo' and 'bar' share the same decl_spec, 'int'. It must
be unshared before being passed to add_symbol().
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=46bd1da672d66ccd8a639d3c1f8a166048cca608
Fixes: 5dae9a550a74 ("genksyms: allow to ignore symbol checksum changes")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0210d251162f4033350a94a43f95b1c39ec84a90 upstream.
The orc_sort_cmp() function, used with qsort(), previously violated the
symmetry and transitivity rules required by the C standard. Specifically,
when both entries are ORC_TYPE_UNDEFINED, it could result in both a < b
and b < a, which breaks the required symmetry and transitivity. This can
lead to undefined behavior and incorrect sorting results, potentially
causing memory corruption in glibc implementations [1].
Symmetry: If x < y, then y > x.
Transitivity: If x < y and y < z, then x < z.
Fix the comparison logic to return 0 when both entries are
ORC_TYPE_UNDEFINED, ensuring compliance with qsort() requirements.
Link: https://www.qualys.com/2024/01/30/qsort.txt [1]
Link: https://lkml.kernel.org/r/20241226140332.2670689-1-visitorckw@gmail.com
Fixes: 57fa18994285 ("scripts/sorttable: Implement build-time ORC unwind table sorting")
Fixes: fb799447ae29 ("x86,objtool: Split UNWIND_HINT_EMPTY in two")
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: <chuang@cs.nycu.edu.tw>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bf36b4bf1b9a7a0015610e2f038ee84ddb085de2 ]
This loop should iterate over the range from 'min' to 'max' inclusively.
The last interation is missed.
Fixes: 1d8f430c15b3 ("[PATCH] Input: add modalias support")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 77dc55a978e69625f9718460012e5ef0172dc4de ]
When building a 64-bit kernel on a 32-bit build host, incorrect
input MODULE_ALIAS() entries may be generated.
For example, when compiling a 64-bit kernel with CONFIG_INPUT_MOUSEDEV=m
on a 64-bit build machine, you will get the correct output:
$ grep MODULE_ALIAS drivers/input/mousedev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*110,*r*0,*1,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*r*8,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*14A,*r*a*0,*1,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*145,*r*a*0,*1,*18,*1C,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*110,*r*a*0,*1,*m*l*s*f*w*");
However, building the same kernel on a 32-bit machine results in
incorrect output:
$ grep MODULE_ALIAS drivers/input/mousedev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*110,*130,*r*0,*1,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*r*8,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*14A,*16A,*r*a*0,*1,*20,*21,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*145,*165,*r*a*0,*1,*18,*1C,*20,*21,*38,*3C,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*110,*130,*r*a*0,*1,*20,*21,*m*l*s*f*w*");
A similar issue occurs with CONFIG_INPUT_JOYDEV=m. On a 64-bit build
machine, the output is:
$ grep MODULE_ALIAS drivers/input/joydev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*0,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*2,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*8,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*6,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*120,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*130,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*2C0,*r*a*m*l*s*f*w*");
However, on a 32-bit machine, the output is incorrect:
$ grep MODULE_ALIAS drivers/input/joydev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*0,*20,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*2,*22,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*8,*28,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*6,*26,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*11F,*13F,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*11F,*13F,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*2C0,*2E0,*r*a*m*l*s*f*w*");
When building a 64-bit kernel, BITS_PER_LONG is defined as 64. However,
on a 32-bit build machine, the constant 1L is a signed 32-bit value.
Left-shifting it beyond 32 bits causes wraparound, and shifting by 31
or 63 bits makes it a negative value.
The fix in commit e0e92632715f ("[PATCH] PATCH: 1 line 2.6.18 bugfix:
modpost-64bit-fix.patch") is incorrect; it only addresses cases where
a 64-bit kernel is built on a 64-bit build machine, overlooking cases
on a 32-bit build machine.
Using 1ULL ensures a 64-bit width on both 32-bit and 64-bit machines,
avoiding the wraparound issue.
Fixes: e0e92632715f ("[PATCH] PATCH: 1 line 2.6.18 bugfix: modpost-64bit-fix.patch")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Stable-dep-of: bf36b4bf1b9a ("modpost: fix the missed iteration for the max bit in do_input()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 7912405643a14b527cd4a4f33c1d4392da900888 upstream.
The compiler can fully inline the actual handler function of an interrupt
entry into the .irqentry.text entry point. If such a function contains an
access which has an exception table entry, modpost complains about a
section mismatch:
WARNING: vmlinux.o(__ex_table+0x447c): Section mismatch in reference ...
The relocation at __ex_table+0x447c references section ".irqentry.text"
which is not in the list of authorized sections.
Add .irqentry.text to OTHER_SECTIONS to cure the issue.
Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org # needed for linux-5.4-y
Link: https://lore.kernel.org/all/20241128111844.GE10431@google.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0c3e091319e4748cb36ac9a50848903dc6f54054 ]
This function contains multiple bugs after the following commits:
- ac551828993e ("modpost: i2c aliases need no trailing wildcard")
- 6543becf26ff ("mod/file2alias: make modalias generation safe for cross compiling")
Commit ac551828993e inserted the following code to do_eisa_entry():
else
strcat(alias, "*");
This is incorrect because 'alias' is uninitialized. If it is not
NULL-terminated, strcat() could cause a buffer overrun.
Even if 'alias' happens to be zero-filled, it would output:
MODULE_ALIAS("*");
This would match anything. As a result, the module could be loaded by
any unrelated uevent from an unrelated subsystem.
Commit ac551828993e introduced another bug.
Prior to that commit, the conditional check was:
if (eisa->sig[0])
This checked if the first character of eisa_device_id::sig was not '\0'.
However, commit ac551828993e changed it as follows:
if (sig[0])
sig[0] is NOT the first character of the eisa_device_id::sig. The
type of 'sig' is 'char (*)[8]', meaning that the type of 'sig[0]' is
'char [8]' instead of 'char'. 'sig[0]' and 'symval' refer to the same
address, which never becomes NULL.
The correct conversion would have been:
if ((*sig)[0])
However, this if-conditional was meaningless because the earlier change
in commit ac551828993e was incorrect.
This commit removes the entire incorrect code, which should never have
been executed.
Fixes: ac551828993e ("modpost: i2c aliases need no trailing wildcard")
Fixes: 6543becf26ff ("mod/file2alias: make modalias generation safe for cross compiling")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 984ed20ece1c6c20789ece040cbff3eb1a388fa9 ]
If you enable "Option -> Show Debug Info" and click a link, the program
terminates with the following error:
*** buffer overflow detected ***: terminated
The buffer overflow is caused by the following line:
strcat(data, "$");
The buffer needs one more byte to accommodate the additional character.
Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 33330bcf031818e60a816db0cfd3add9eecc3b28 ]
When merging files without trailing newlines at the end of the file, two
config fragments end up at the same row if file1.config doens't have a
trailing newline at the end of the file.
file1.config "CONFIG_1=y"
file2.config "CONFIG_2=y"
./scripts/kconfig/merge_config.sh -m .config file1.config file2.config
This will generate a .config looking like this.
cat .config
...
CONFIG_1=yCONFIG_2=y"
Making sure so we add a newline at the end of every config file that is
passed into the script.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 3415b10a03945b0da4a635e146750dfe5ce0f448 upstream.
After a recent change in clang to stop consuming all instances of '-S'
and '-c' [1], the stack protector scripts break due to the kernel's use
of -Werror=unused-command-line-argument to catch cases where flags are
not being properly consumed by the compiler driver:
$ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument
clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument]
This results in CONFIG_STACKPROTECTOR getting disabled because
CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set.
'-c' and '-S' both instruct the compiler to stop at different stages of
the pipeline ('-S' after compiling, '-c' after assembling), so having
them present together in the same command makes little sense. In this
case, the test wants to stop before assembling because it is looking at
the textual assembly output of the compiler for either '%fs' or '%gs',
so remove '-c' from the list of arguments to resolve the error.
All versions of GCC continue to work after this change, along with
versions of clang that do or do not contain the change mentioned above.
Cc: stable@vger.kernel.org
Fixes: 4f7fd4d7a791 ("[PATCH] Add the -fstack-protector option to the CFLAGS")
Fixes: 60a5317ff0f4 ("x86: implement x86_32 stack protector")
Link: https://github.com/llvm/llvm-project/commit/6461e537815f7fa68cef06842505353cf5600e9c [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 77a92660d8fe8d29503fae768d9f5eb529c88b36 ]
expr_trans_bool() performs an incorrect transformation.
[Test Code]
config MODULES
def_bool y
modules
config A
def_bool y
select C if B != n
config B
def_tristate m
config C
tristate
[Result]
CONFIG_MODULES=y
CONFIG_A=y
CONFIG_B=m
CONFIG_C=m
This output is incorrect because CONFIG_C=y is expected.
Documentation/kbuild/kconfig-language.rst clearly explains the function
of the '!=' operator:
If the values of both symbols are equal, it returns 'n',
otherwise 'y'.
Therefore, the statement:
select C if B != n
should be equivalent to:
select C if y
Or, more simply:
select C
Hence, the symbol C should be selected by the value of A, which is 'y'.
However, expr_trans_bool() wrongly transforms it to:
select C if B
Therefore, the symbol C is selected by (A && B), which is 'm'.
The comment block of expr_trans_bool() correctly explains its intention:
* bool FOO!=n => FOO
^^^^
If FOO is bool, FOO!=n can be simplified into FOO. This is correct.
However, the actual code performs this transformation when FOO is
tristate:
if (e->left.sym->type == S_TRISTATE) {
^^^^^^^^^^
While it can be fixed to S_BOOLEAN, there is no point in doing so
because expr_tranform() already transforms FOO!=n to FOO when FOO is
bool. (see the "case E_UNEQUAL" part)
expr_trans_bool() is wrong and unnecessary.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 46edf4372e336ef3a61c3126e49518099d2e2e6d ]
Currently, the initial state of the "Save" button is always active.
If none of the CONFIG options are changed while loading the .config
file, the "Save" button should be greyed out.
This can be fixed by calling conf_read() after widget initialization.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2e3f65ccfe6b0778b261ad69c9603ae85f210334 upstream.
In GCC 14, last_stmt() was renamed to last_nondebug_stmt(). Add a helper
macro to handle the renaming.
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3430f65d6130ccbc86f0ff45642eeb9e2032a600 ]
In convention, short logs print the output file, not the input file.
Let's change the suffix for 'AS' since it assembles *.S into *.o.
[Before]
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.S
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.S
LD vmlinux
[After]
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.o
LD vmlinux
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 9cc5f3bf63aa98bd7cc7ce8a8599077fde13283e upstream.
The compiled dtb files aren't executable, so install them with 0644 as their
permission mode, instead of defaulting to 0755 for the permission mode and
installing them with the executable bits set.
Some Linux distributions, including Debian, [1][2][3] already include fixes
in their kernel package build recipes to change the dtb file permissions to
0644 in their kernel packages. These changes, when additionally propagated
into the long-term kernel versions, will allow such distributions to remove
their downstream fixes.
[1] https://salsa.debian.org/kernel-team/linux/-/merge_requests/642
[2] https://salsa.debian.org/kernel-team/linux/-/merge_requests/749
[3] https://salsa.debian.org/kernel-team/linux/-/blob/debian/6.8.12-1/debian/rules.real#L193
Cc: Diederik de Haas <didi.debian@cknow.org>
Cc: <stable@vger.kernel.org>
Fixes: aefd80307a05 ("kbuild: refactor Makefile.dtbinst more")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit aabdc960a283ba78086b0bf66ee74326f49e218e ]
Currently, comparisons to 'm' or 'n' result in incorrect output.
[Test Code]
config MODULES
def_bool y
modules
config A
def_tristate m
config B
def_bool A > n
CONFIG_B is unset, while CONFIG_B=y is expected.
The reason for the issue is because Kconfig compares the tristate values
as strings.
Currently, the .type fields in the constant symbol definitions,
symbol_{yes,mod,no} are unspecified, i.e., S_UNKNOWN.
When expr_calc_value() evaluates 'A > n', it checks the types of 'A' and
'n' to determine how to compare them.
The left-hand side, 'A', is a tristate symbol with a value of 'm', which
corresponds to a numeric value of 1. (Internally, 'y', 'm', and 'n' are
represented as 2, 1, and 0, respectively.)
The right-hand side, 'n', has an unknown type, so it is treated as the
string "n" during the comparison.
expr_calc_value() compares two values numerically only when both can
have numeric values. Otherwise, they are compared as strings.
symbol numeric value ASCII code
-------------------------------------
y 2 0x79
m 1 0x6d
n 0 0x6e
'm' is greater than 'n' if compared numerically (since 1 is greater
than 0), but smaller than 'n' if compared as strings (since the ASCII
code 0x6d is smaller than 0x6e).
Specifying .type=S_TRISTATE for symbol_{yes,mod,no} fixes the above
test code.
Doing so, however, would cause a regression to the following test code.
[Test Code 2]
config MODULES
def_bool n
modules
config A
def_tristate n
config B
def_bool A = m
You would get CONFIG_B=y, while CONFIG_B should not be set.
The reason is because sym_get_string_value() turns 'm' into 'n' when the
module feature is disabled. Consequently, expr_calc_value() evaluates
'A = n' instead of 'A = m'. This oddity has been hidden because the type
of 'm' was previously S_UNKNOWN instead of S_TRISTATE.
sym_get_string_value() should not tweak the string because the tristate
value has already been correctly calculated. There is no reason to
return the string "n" where its tristate value is mod.
Fixes: 31847b67bec0 ("kconfig: allow use of relations other than (in)equality")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c93db682cfb213501881072a9200a48ce1dc3c3f upstream.
Commit 3fb0fdb3bbe7 ("x86/stackprotector/32: Make the canary into a regular
percpu variable") modified the stackprotector check on 32-bit x86 to check
if gcc supports using %fs as canary. Adjust dummy-tools gcc script to pass
this new test by returning "%fs" rather than "%gs" if it detects
-mstack-protector-guard-reg=fs on command line.
Fixes: 3fb0fdb3bbe7 ("x86/stackprotector/32: Make the canary into a regular percpu variable")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The backport of commit 3080ea5553cc ("stddef: Introduce
DECLARE_FLEX_ARRAY() helper") to 5.10.y (as a prerequisite of another
fix) modified scripts/kernel-doc and introduced a syntax error:
Global symbol "$args" requires explicit package name (did you forget to declare "my $args"?) at ./scripts/kernel-doc line 1236.
Global symbol "$args" requires explicit package name (did you forget to declare "my $args"?) at ./scripts/kernel-doc line 1236.
Execution of ./scripts/kernel-doc aborted due to compilation errors.
Note: The issue could be fixed in the 5.10.y series as well by
backporting e86bdb24375a ("scripts: kernel-doc: reduce repeated regex
expressions into variables") but just replacing the undeclared args back
to ([^,)]+) was the most straightforward approach. The issue is specific
to the backport to the 5.10.y series. Thus there is as well no upstream
commit for this change.
Fixes: 443b16ee3d9c ("stddef: Introduce DECLARE_FLEX_ARRAY() helper") # 5.10.y
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Link: https://lore.kernel.org/regressions/ZeHKjjPGoyv_b2Tg@eldamar.lan/T/#u
Link: https://bugs.debian.org/1064035
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3fb0fdb3bbe7aed495109b3296b06c2409734023 ]
On 32-bit kernels, the stackprotector canary is quite nasty -- it is
stored at %gs:(20), which is nasty because 32-bit kernels use %fs for
percpu storage. It's even nastier because it means that whether %gs
contains userspace state or kernel state while running kernel code
depends on whether stackprotector is enabled (this is
CONFIG_X86_32_LAZY_GS), and this setting radically changes the way
that segment selectors work. Supporting both variants is a
maintenance and testing mess.
Merely rearranging so that percpu and the stack canary
share the same segment would be messy as the 32-bit percpu address
layout isn't currently compatible with putting a variable at a fixed
offset.
Fortunately, GCC 8.1 added options that allow the stack canary to be
accessed as %fs:__stack_chk_guard, effectively turning it into an ordinary
percpu variable. This lets us get rid of all of the code to manage the
stack canary GDT descriptor and the CONFIG_X86_32_LAZY_GS mess.
(That name is special. We could use any symbol we want for the
%fs-relative mode, but for CONFIG_SMP=n, gcc refuses to let us use any
name other than __stack_chk_guard.)
Forcibly disable stackprotector on older compilers that don't support
the new options and turn the stack canary into a percpu variable. The
"lazy GS" approach is now used for all 32-bit configurations.
Also makes load_gs_index() work on 32-bit kernels. On 64-bit kernels,
it loads the GS selector and updates the user GSBASE accordingly. (This
is unchanged.) On 32-bit kernels, it loads the GS selector and updates
GSBASE, which is now always the user base. This means that the overall
effect is the same on 32-bit and 64-bit, which avoids some ifdeffery.
[ bp: Massage commit message. ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/c0ff7dba14041c7e5d1cae5d4df052f03759bef3.1613243844.git.luto@kernel.org
Stable-dep-of: e3f269ed0acc ("x86/pm: Work around false positive kmemleak report in msr_build_context()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 75b5ab134bb5f657ef7979a59106dce0657e8d87 ]
Clang enables -Wenum-enum-conversion and -Wenum-compare-conditional
under -Wenum-conversion. A recent change in Clang strengthened these
warnings and they appear frequently in common builds, primarily due to
several instances in common headers but there are quite a few drivers
that have individual instances as well.
include/linux/vmstat.h:508:43: warning: arithmetic between different enumeration types ('enum zone_stat_item' and 'enum numa_stat_item') [-Wenum-enum-conversion]
508 | return vmstat_text[NR_VM_ZONE_STAT_ITEMS +
| ~~~~~~~~~~~~~~~~~~~~~ ^
509 | item];
| ~~~~
drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c:955:24: warning: conditional expression between different enumeration types ('enum iwl_mac_beacon_flags' and 'enum iwl_mac_beacon_flags_v1') [-Wenum-compare-conditional]
955 | flags |= is_new_rate ? IWL_MAC_BEACON_CCK
| ^ ~~~~~~~~~~~~~~~~~~
956 | : IWL_MAC_BEACON_CCK_V1;
| ~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c:1120:21: warning: conditional expression between different enumeration types ('enum iwl_mac_beacon_flags' and 'enum iwl_mac_beacon_flags_v1') [-Wenum-compare-conditional]
1120 | 0) > 10 ?
| ^
1121 | IWL_MAC_BEACON_FILS :
| ~~~~~~~~~~~~~~~~~~~
1122 | IWL_MAC_BEACON_FILS_V1;
| ~~~~~~~~~~~~~~~~~~~~~~
Doing arithmetic between or returning two different types of enums could
be a bug, so each of the instance of the warning needs to be evaluated.
Unfortunately, as mentioned above, there are many instances of this
warning in many different configurations, which can break the build when
CONFIG_WERROR is enabled.
To avoid introducing new instances of the warnings while cleaning up the
disruption for the majority of users, disable these warnings for the
default build while leaving them on for W=1 builds.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2002
Link: https://github.com/llvm/llvm-project/commit/8c2ae42b3e1c6aa7c18f873edcebff7c0b45a37e
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit af8bbce92044dc58e4cc039ab94ee5d470a621f5 ]
A macro placed at the end of a file with no newline causes an infinite
loop.
[Test Kconfig]
$(info,hello)
\ No newline at end of file
I realized that flex-provided input() returns 0 instead of EOF when it
reaches the end of a file.
Fixes: 104daea149c4 ("kconfig: reference environment variables directly and remove 'option env='")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dae4a0171e25884787da32823b3081b4c2acebb2 ]
With python 3.12, '\#' results in this warning
SyntaxWarning: invalid escape sequence '\#'
Signed-off-by: Andrew Ballance <andrewjballance@gmail.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e37243b65d528a8a9f8b9a57a43885f8e8dfc15c ]
The bpf_doc script refers to the GPL as the "GNU Privacy License".
I strongly suspect that the author wanted to refer to the GNU General
Public License, under which the Linux kernel is released, as, to the
best of my knowledge, there is no license named "GNU Privacy License".
This patch corrects the license name in the script accordingly.
Fixes: 56a092c89505 ("bpf: add script and prepare bpf.h for new helpers documentation")
Signed-off-by: Gianmarco Lusvardi <glusvardi@posteo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240213230544.930018-3-glusvardi@posteo.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit efbd6398353315b7018e6943e41fee9ec35e875f ]
GNU's addr2line can have problems parsing a vmlinux built with LLVM,
particularly when LTO was used. In order to decode the traces correctly
this patch adds the ability to switch to LLVM's utilities readelf and
addr2line. The same approach is followed by Will in [1].
Before:
$ scripts/decode_stacktrace.sh vmlinux < kernel.log
[17716.240635] Call trace:
[17716.240646] skb_cow_data (??:?)
[17716.240654] esp6_input (ld-temp.o:?)
[17716.240666] xfrm_input (ld-temp.o:?)
[17716.240674] xfrm6_rcv (??:?)
[...]
After:
$ LLVM=1 scripts/decode_stacktrace.sh vmlinux < kernel.log
[17716.240635] Call trace:
[17716.240646] skb_cow_data (include/linux/skbuff.h:2172 net/core/skbuff.c:4503)
[17716.240654] esp6_input (net/ipv6/esp6.c:977)
[17716.240666] xfrm_input (net/xfrm/xfrm_input.c:659)
[17716.240674] xfrm6_rcv (net/ipv6/xfrm6_input.c:172)
[...]
Note that one could set CROSS_COMPILE=llvm- instead to hack around this
issue. However, doing so can break the decodecode routine as it will
force the selection of other LLVM utilities down the line e.g. llvm-as.
[1] https://lore.kernel.org/all/20230914131225.13415-3-will@kernel.org/
Link: https://lkml.kernel.org/r/20230929034836.403735-1-cmllamas@google.com
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Tested-by: Justin Stitt <justinstitt@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 99115db4ecc87af73415939439ec604ea0531e6f ]
Recent versions of both Binutils (`c++filt`) and LLVM (`llvm-cxxfilt`)
provide Rust v0 mangling support.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Stable-dep-of: efbd63983533 ("scripts/decode_stacktrace.sh: optionally use LLVM utilities")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3af8acf6aff2a98731522b52927429760f0b8006 ]
Old bash version don't support associative array variables. Avoid to use
associative array variables to avoid error.
Without this, old bash version will report error as fellowing
[ 15.954042] Kernel panic - not syncing: sysrq triggered crash
[ 15.955252] CPU: 1 PID: 167 Comm: sh Not tainted 5.18.0-rc1-00208-gb7d075db2fd5 #4
[ 15.956472] Hardware name: Hobot J5 Virtual development board (DT)
[ 15.957856] Call trace:
./scripts/decode_stacktrace.sh: line 128: ,dump_backtrace: syntax error: operand expected (error token is ",dump_backtrace")
Link: https://lkml.kernel.org/r/20220409180331.24047-1-schspa@gmail.com
Signed-off-by: Schspa Shi <schspa@gmail.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: efbd63983533 ("scripts/decode_stacktrace.sh: optionally use LLVM utilities")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5bf0f3bc377e5f87bfd61ccc9c1efb3c6261f2c3 ]
Sometimes if you're using tools that have linked things improperly or have
new features/sections that older tools don't expect you'll see warnings
printed to stderr. We don't really care about these warnings, so let's
just silence these messages to cleanup output of this script.
Link: https://lkml.kernel.org/r/20210511003845.2429846-10-swboyd@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: efbd63983533 ("scripts/decode_stacktrace.sh: optionally use LLVM utilities")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e3a9ee963ad8ba677ca925149812c5932b49af69 upstream.
Commit 90ceddcb4950 ("bpf: Support llvm-objcopy for vmlinux BTF")
changed the ELF type of .btf.vmlinux.bin.o to ET_REL via dd, which works
fine for little endian platforms:
00000000 7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00 |.ELF............|
-00000010 03 00 b7 00 01 00 00 00 00 00 00 80 00 80 ff ff |................|
+00000010 01 00 b7 00 01 00 00 00 00 00 00 80 00 80 ff ff |................|
However, for big endian platforms, it changes the wrong byte, resulting
in an invalid ELF file type, which ld.lld rejects:
00000000 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00 |.ELF............|
-00000010 00 03 00 16 00 00 00 01 00 00 00 00 00 10 00 00 |................|
+00000010 01 03 00 16 00 00 00 01 00 00 00 00 00 10 00 00 |................|
Type: <unknown>: 103
ld.lld: error: .btf.vmlinux.bin.o: unknown file type
Fix this by updating the entire 16-bit e_type field rather than just a
single byte, so that everything works correctly for all platforms and
linkers.
00000000 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00 |.ELF............|
-00000010 00 03 00 16 00 00 00 01 00 00 00 00 00 10 00 00 |................|
+00000010 00 01 00 16 00 00 00 01 00 00 00 00 00 10 00 00 |................|
Type: REL (Relocatable file)
While in the area, update the comment to mention that binutils 2.35+
matches LLD's behavior of rejecting an ET_EXEC input, which occurred
after the comment was added.
Cc: stable@vger.kernel.org
Fixes: 90ceddcb4950 ("bpf: Support llvm-objcopy for vmlinux BTF")
Link: https://github.com/llvm/llvm-project/pull/75643
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[nathan: Fix silent conflict due to lack of 7d153696e5db in older trees]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5d9a16b2a4d9e8fa028892ded43f6501bc2969e5 ]
get_line() does not trim the leading spaces, but the
parse_source_files() expects to get lines with source files paths where
the first space occurs after the file path.
Fixes: 70f30cfe5b89 ("modpost: use read_text_file() and get_line() for reading text files")
Signed-off-by: Radek Krejci <radek.krejci@oracle.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 3080ea5553cc909b000d1f1d964a9041962f2c5b upstream.
There are many places where kernel code wants to have several different
typed trailing flexible arrays. This would normally be done with multiple
flexible arrays in a union, but since GCC and Clang don't (on the surface)
allow this, there have been many open-coded workarounds, usually involving
neighboring 0-element arrays at the end of a structure. For example,
instead of something like this:
struct thing {
...
union {
struct type1 foo[];
struct type2 bar[];
};
};
code works around the compiler with:
struct thing {
...
struct type1 foo[0];
struct type2 bar[];
};
Another case is when a flexible array is wanted as the single member
within a struct (which itself is usually in a union). For example, this
would be worked around as:
union many {
...
struct {
struct type3 baz[0];
};
};
These kinds of work-arounds cause problems with size checks against such
zero-element arrays (for example when building with -Warray-bounds and
-Wzero-length-bounds, and with the coming FORTIFY_SOURCE improvements),
so they must all be converted to "real" flexible arrays, avoiding warnings
like this:
fs/hpfs/anode.c: In function 'hpfs_add_sector_to_btree':
fs/hpfs/anode.c:209:27: warning: array subscript 0 is outside the bounds of an interior zero-length array 'struct bplus_internal_node[0]' [-Wzero-length-bounds]
209 | anode->btree.u.internal[0].down = cpu_to_le32(a);
| ~~~~~~~~~~~~~~~~~~~~~~~^~~
In file included from fs/hpfs/hpfs_fn.h:26,
from fs/hpfs/anode.c:10:
fs/hpfs/hpfs.h:412:32: note: while referencing 'internal'
412 | struct bplus_internal_node internal[0]; /* (internal) 2-word entries giving
| ^~~~~~~~
drivers/net/can/usb/etas_es58x/es58x_fd.c: In function 'es58x_fd_tx_can_msg':
drivers/net/can/usb/etas_es58x/es58x_fd.c:360:35: warning: array subscript 65535 is outside the bounds of an interior zero-length array 'u8[0]' {aka 'unsigned char[]'} [-Wzero-length-bounds]
360 | tx_can_msg = (typeof(tx_can_msg))&es58x_fd_urb_cmd->raw_msg[msg_len];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/net/can/usb/etas_es58x/es58x_core.h:22,
from drivers/net/can/usb/etas_es58x/es58x_fd.c:17:
drivers/net/can/usb/etas_es58x/es58x_fd.h:231:6: note: while referencing 'raw_msg'
231 | u8 raw_msg[0];
| ^~~~~~~
However, it _is_ entirely possible to have one or more flexible arrays
in a struct or union: it just has to be in another struct. And since it
cannot be alone in a struct, such a struct must have at least 1 other
named member -- but that member can be zero sized. Wrap all this nonsense
into the new DECLARE_FLEX_ARRAY() in support of having flexible arrays
in unions (or alone in a struct).
As with struct_group(), since this is needed in UAPI headers as well,
implement the core there, with a non-UAPI wrapper.
Additionally update kernel-doc to understand its existence.
https://github.com/KSPP/linux/issues/137
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5889d6ede53bc17252f79c142387e007224aa554 upstream.
The code currently leaks the absolute path of the ABI files into the
rendered documentation.
There exists code to prevent this, but it is not effective when an
absolute path is passed, which it is when $srctree is used.
I consider this to be a minimal, stop-gap fix; a better fix would strip
off the actual prefix instead of hacking it off with a regex.
Link: https://mastodon.social/@vegard/111677490643495163
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231231235959.3342928-1-vegard.nossum@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 829649443e78d85db0cff0c37cadb28fbb1a5f6f ]
There are some wrong return values check in sign-file when call OpenSSL
API. The ERR() check cond is wrong because of the program only check the
return value is < 0 which ignored the return val is 0. For example:
1. CMS_final() return 1 for success or 0 for failure.
2. i2d_CMS_bio_stream() returns 1 for success or 0 for failure.
3. i2d_TYPEbio() return 1 for success and 0 for failure.
4. BIO_free() return 1 for success and 0 for failure.
Link: https://www.openssl.org/docs/manmaster/man3/
Fixes: e5a2e3c84782 ("scripts/sign-file.c: Add support for signing with a raw signature")
Signed-off-by: Yusong Gao <a869920004@gmail.com>
Reviewed-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20231213024405.624692-1-a869920004@gmail.com/ # v5
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ee34db3f271cea4d4252048617919c2caafe698b upstream.
All addresses printed by checkstack have an extra incorrect 0 appended at
the end.
This was introduced with commit 677f1410e058 ("scripts/checkstack.pl: don't
display $dre as different entity"): since then the address is taken from
the line which contains the function name, instead of the line which
contains stack consumption. E.g. on s390:
0000000000100a30 <do_one_initcall>:
...
100a44: e3 f0 ff 70 ff 71 lay %r15,-144(%r15)
So the used regex which matches spaces and hexadecimal numbers to extract
an address now matches a different substring. Subsequently replacing spaces
with 0 appends a zero at the and, instead of replacing leading spaces.
Fix this by using the proper regex, and simplify the code a bit.
Link: https://lkml.kernel.org/r/20231120183719.2188479-2-hca@linux.ibm.com
Fixes: 677f1410e058 ("scripts/checkstack.pl: don't display $dre as different entity")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Maninder Singh <maninder1.s@samsung.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Vaneet Narang <v.narang@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ae1eff0349f2e908fc083630e8441ea6dc434dc0 ]
Currently, sym_validate_range() duplicates the range string using
xstrdup(), which is overwritten by a subsequent sym_calc_value() call.
It results in a memory leak.
Instead, only the pointer should be copied.
Below is a test case, with a summary from Valgrind.
[Test Kconfig]
config FOO
int "foo"
range 10 20
[Test .config]
CONFIG_FOO=0
[Before]
LEAK SUMMARY:
definitely lost: 3 bytes in 1 blocks
indirectly lost: 0 bytes in 0 blocks
possibly lost: 0 bytes in 0 blocks
still reachable: 17,465 bytes in 21 blocks
suppressed: 0 bytes in 0 blocks
[After]
LEAK SUMMARY:
definitely lost: 0 bytes in 0 blocks
indirectly lost: 0 bytes in 0 blocks
possibly lost: 0 bytes in 0 blocks
still reachable: 17,462 bytes in 20 blocks
suppressed: 0 bytes in 0 blocks
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 381fdb73d1e2a48244de7260550e453d1003bb8e upstream.
The performance mode of the gcc-plugin randstruct was shuffling struct
members outside of the cache-line groups. Limit the range to the
specified group indexes.
Cc: linux-hardening@vger.kernel.org
Cc: stable@vger.kernel.org
Reported-by: Lukas Loidolt <e1634039@student.tuwien.ac.at>
Closes: https://lore.kernel.org/all/f3ca77f0-e414-4065-83a5-ae4c4d25545d@student.tuwien.ac.at
Fixes: 313dd1b62921 ("gcc-plugins: Add the randstruct plugin")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7f54e00e5842663c2cea501bbbdfa572c94348a3 ]
When MODULE_DEVICE_TABLE(tee, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/char/hw_random/optee-rng.c
is built as a module for ARM little-endian.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
MODULE_ALIAS("tee:ab7a617c-b8e7-4d8f-8301-d09b61036b64*");
However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
MODULE_ALIAS("tee:646b0361-9bd0-0183-8f4d-e7b87c617aab*");
The same problem also occurs when you enable CONFIG_CPU_BIG_ENDIAN,
and build it on a little-endian host.
This issue has been unnoticed because the ARM kernel is configured for
little-endian by default, and most likely built on a little-endian host
(cross-build on x86 or native-build on ARM).
The uuid field must not be reversed because uuid_t is an array of __u8.
Fixes: 0fc1db9d1059 ("tee: add bus driver framework for TEE based devices")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cbc3d00cf88fda95dbcafee3b38655b7a8f2650a ]
Without this 'else' statement, an "usb" name goes into two handlers:
the first/previous 'if' statement _AND_ the for-loop over 'devtable',
but the latter is useless as it has no 'usb' device_id entry anyway.
Tested with allmodconfig before/after patch; no changes to *.mod.c:
git checkout v6.6-rc3
make -j$(nproc) allmodconfig
make -j$(nproc) olddefconfig
make -j$(nproc)
find . -name '*.mod.c' | cpio -pd /tmp/before
# apply patch
make -j$(nproc)
find . -name '*.mod.c' | cpio -pd /tmp/after
diff -r /tmp/before/ /tmp/after/
# no difference
Fixes: acbef7b76629 ("modpost: fix module autoloading for OF devices with generic compatible property")
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a3b7039bb2b22fcd2ad20d59c00ed4e606ce3754 ]
Buffer 'new_argv' is accessed without bound check after accessing with
bound check via 'new_argc' index.
Fixes: e298f3b49def ("kconfig: add built-in function support")
Co-developed-by: Ivanov Mikhail <ivanov.mikhail1@huawei-partners.com>
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3a3f1e573a105328a2cca45a7cfbebabbf5e3192 ]
The > comparison should be >= to prevent an out of bounds array
access.
Fixes: 52dc0595d540 ("modpost: handle relocations mismatch in __ex_table.")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 56a24b8ce6a7f9c4a21b2276a8644f6f3d8fc14d ]
addend_arm_rel() processes R_ARM_PC24, R_ARM_CALL, R_ARM_JUMP24 in a
wrong way.
Here, test code.
[test code for R_ARM_JUMP24]
.section .init.text,"ax"
bar:
bx lr
.section .text,"ax"
.globl foo
foo:
b bar
[test code for R_ARM_CALL]
.section .init.text,"ax"
bar:
bx lr
.section .text,"ax"
.globl foo
foo:
push {lr}
bl bar
pop {pc}
If you compile it with ARM multi_v7_defconfig, modpost will show the
symbol name, (unknown).
WARNING: modpost: vmlinux.o: section mismatch in reference: foo (section: .text) -> (unknown) (section: .init.text)
(You need to use GNU linker instead of LLD to reproduce it.)
Fix the code to make modpost show the correct symbol name.
I imported (with adjustment) sign_extend32() from include/linux/bitops.h.
The '+8' is the compensation for pc-relative instruction. It is
documented in "ELF for the Arm Architecture" [1].
"If the relocation is pc-relative then compensation for the PC bias
(the PC value is 8 bytes ahead of the executing instruction in Arm
state and 4 bytes in Thumb state) must be encoded in the relocation
by the object producer."
[1]: https://github.com/ARM-software/abi-aa/blob/main/aaelf32/aaelf32.rst
Fixes: 56a974fa2d59 ("kbuild: make better section mismatch reports on arm")
Fixes: 6e2e340b59d2 ("ARM: 7324/1: modpost: Fix section warnings for ARM for many compilers")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b7c63520f6703a25eebb4f8138fed764fcae1c6f ]
addend_arm_rel() processes R_ARM_ABS32 in a wrong way.
Here, test code.
[test code 1]
#include <linux/init.h>
int __initdata foo;
int get_foo(void) { return foo; }
If you compile it with ARM versatile_defconfig, modpost will show the
symbol name, (unknown).
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> (unknown) (section: .init.data)
(You need to use GNU linker instead of LLD to reproduce it.)
If you compile it for other architectures, modpost will show the correct
symbol name.
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> foo (section: .init.data)
For R_ARM_ABS32, addend_arm_rel() sets r->r_addend to a wrong value.
I just mimicked the code in arch/arm/kernel/module.c.
However, there is more difficulty for ARM.
Here, test code.
[test code 2]
#include <linux/init.h>
int __initdata foo;
int get_foo(void) { return foo; }
int __initdata bar;
int get_bar(void) { return bar; }
With this commit applied, modpost will show the following messages
for ARM versatile_defconfig:
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> foo (section: .init.data)
WARNING: modpost: vmlinux.o: section mismatch in reference: get_bar (section: .text) -> foo (section: .init.data)
The reference from 'get_bar' to 'foo' seems wrong.
I have no solution for this because it is true in assembly level.
In the following output, relocation at 0x1c is no longer associated
with 'bar'. The two relocation entries point to the same symbol, and
the offset to 'bar' is encoded in the instruction 'r0, [r3, #4]'.
Disassembly of section .text:
00000000 <get_foo>:
0: e59f3004 ldr r3, [pc, #4] @ c <get_foo+0xc>
4: e5930000 ldr r0, [r3]
8: e12fff1e bx lr
c: 00000000 .word 0x00000000
00000010 <get_bar>:
10: e59f3004 ldr r3, [pc, #4] @ 1c <get_bar+0xc>
14: e5930004 ldr r0, [r3, #4]
18: e12fff1e bx lr
1c: 00000000 .word 0x00000000
Relocation section '.rel.text' at offset 0x244 contains 2 entries:
Offset Info Type Sym.Value Sym. Name
0000000c 00000c02 R_ARM_ABS32 00000000 .init.data
0000001c 00000c02 R_ARM_ABS32 00000000 .init.data
When find_elf_symbol() gets into a situation where relsym->st_name is
zero, there is no guarantee to get the symbol name as written in C.
I am keeping the current logic because it is useful in many architectures,
but the symbol name is not always correct depending on the optimization.
I left some comments in find_tosym().
Fixes: 56a974fa2d59 ("kbuild: make better section mismatch reports on arm")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e1b37563caffc410bb4b55f153ccb14dede66815 upstream.
gtags considers any file outside of its current working directory
"outside the source tree" and refuses to index it. For O= kernel builds,
or when "make" is invoked from a directory other then the kernel source
tree, gtags ignores the entire kernel source and generates an empty
index.
Force-set gtags current working directory to the kernel source tree.
Due to commit 9da0763bdd82 ("kbuild: Use relative path when building in
a subdir of the source tree"), if the kernel build is done in a
sub-directory of the kernel source tree, the kernel Makefile will set
the kernel's $srctree to ".." for shorter compile-time and run-time
warnings. Consequently, the list of files to be indexed will be in the
"../*" form, rendering all such paths invalid once gtags switches to the
kernel source tree as its current working directory.
If gtags indexing is requested and the build directory is not the kernel
source tree, index all files in absolute-path form.
Note, indexing in absolute-path form will not affect the generated
index, as paths in gtags indices are always relative to the gtags "root
directory" anyway (as evidenced by "gtags --dump").
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
mainline commit: e6a71160cc145e18ab45195abf89884112e02dfb
The gimple-iterator.h header must be included before gimple-fold.h
starting with GCC 13. Reorganize gimple headers to work for all GCC
versions.
Reported-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/all/20230113173033.4380-1-palmer@rivosinc.com/
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
[ Modified to handle differences in other includes and conditional compilation in the 5.10.y tree. ]
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
