| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
|
|
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
|
|
Pull bitmap updates from Yury Norov:
- FIELD_PREP_WM16() consolidation (Nicolas)
- bitmaps for Rust (Burak)
- __fls() fix for arc (Kees)
* tag 'bitmap-for-6.18' of https://github.com/norov/linux: (25 commits)
rust: add dynamic ID pool abstraction for bitmap
rust: add find_bit_benchmark_rust module.
rust: add bitmap API.
rust: add bindings for bitops.h
rust: add bindings for bitmap.h
phy: rockchip-pcie: switch to FIELD_PREP_WM16 macro
clk: sp7021: switch to FIELD_PREP_WM16 macro
PCI: dw-rockchip: Switch to FIELD_PREP_WM16 macro
PCI: rockchip: Switch to FIELD_PREP_WM16* macros
net: stmmac: dwmac-rk: switch to FIELD_PREP_WM16 macro
ASoC: rockchip: i2s-tdm: switch to FIELD_PREP_WM16_CONST macro
drm/rockchip: dw_hdmi: switch to FIELD_PREP_WM16* macros
phy: rockchip-usb: switch to FIELD_PREP_WM16 macro
drm/rockchip: inno-hdmi: switch to FIELD_PREP_WM16 macro
drm/rockchip: dw_hdmi_qp: switch to FIELD_PREP_WM16 macro
phy: rockchip-samsung-dcphy: switch to FIELD_PREP_WM16 macro
drm/rockchip: vop2: switch to FIELD_PREP_WM16 macro
drm/rockchip: dsi: switch to FIELD_PREP_WM16* macros
phy: rockchip-emmc: switch to FIELD_PREP_WM16 macro
drm/rockchip: lvds: switch to FIELD_PREP_WM16 macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is a very quiet release for regulator, almost all the changes are
new drivers but we do also have some improvements for the Rust
bindings.
- Additional APIs added to the Rust bindings
- Support for Maxim MAX77838, NXP PF0900 and PF5300, Richtek RT5133
and SpacemiT P1"
* tag 'regulator-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (28 commits)
regulator: dt-bindings: qcom,sdm845-refgen-regulator: document more platforms
regulator: Fix MAX77838 selection
regulator: spacemit: support SpacemiT P1 regulators
regulator: max77838: add max77838 regulator driver
dt-bindings: regulator: document max77838 pmic
rust: regulator: add devm_enable and devm_enable_optional
rust: regulator: remove Regulator<Dynamic>
regulator: dt-bindings: rpi-panel: Split 7" Raspberry Pi 720x1280 v2 binding
regulator: pf530x: Add a driver for the NXP PF5300 Regulator
regulator: dt-bindings: nxp,pf530x: Add NXP PF5300/PF5301/PF5302 PMICs
regulator: scmi: Use int type to store negative error codes
regulator: core: Remove redundant ternary operators
rust: regulator: use `to_result` for error handling
regulator: consumer.rst: document bulk operations
regulator: rt5133: Fix IS_ERR() vs NULL bug in rt5133_validate_vendor_info()
regulator: bd718x7: Use kcalloc() instead of kzalloc()
regulator: rt5133: Fix spelling mistake "regualtor" -> "regulator"
regulator: remove unneeded 'fast_io' parameter in regmap_config
regulator: rt5133: Add RT5133 PMIC regulator Support
regulator: dt-bindings: Add Richtek RT5133 Support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Auxiliary:
- Drop call to dev_pm_domain_detach() in auxiliary_bus_probe()
- Optimize logic of auxiliary_match_id()
Rust:
- Auxiliary:
- Use primitive C types from prelude
- DebugFs:
- Add debugfs support for simple read/write files and custom
callbacks through a File-type-based and directory-scope-based
API
- Sample driver code for the File-type-based API
- Sample module code for the directory-scope-based API
- I/O:
- Add io::poll module and implement Rust specific
read_poll_timeout() helper
- IRQ:
- Implement support for threaded and non-threaded device IRQs
based on (&Device<Bound>, IRQ number) tuples (IrqRequest)
- Provide &Device<Bound> cookie in IRQ handlers
- PCI:
- Support IRQ requests from IRQ vectors for a specific
pci::Device<Bound>
- Implement accessors for subsystem IDs, revision, devid and
resource start
- Provide dedicated pci::Vendor and pci::Class types for vendor
and class ID numbers
- Implement Display to print actual vendor and class names; Debug
to print the raw ID numbers
- Add pci::DeviceId::from_class_and_vendor() helper
- Use primitive C types from prelude
- Various minor inline and (safety) comment improvements
- Platform:
- Support IRQ requests from IRQ vectors for a specific
platform::Device<Bound>
- Nova:
- Use pci::DeviceId::from_class_and_vendor() to avoid probing
non-display/compute PCI functions
- Misc:
- Add helper for cpu_relax()
- Update ARef import from sync::aref
sysfs:
- Remove bin_attrs_new field from struct attribute_group
- Remove read_new() and write_new() from struct bin_attribute
Misc:
- Document potential race condition in get_dev_from_fwnode()
- Constify node_group argument in software node registration
functions
- Fix order of kernel-doc parameters in various functions
- Set power.no_pm flag for faux devices
- Set power.no_callbacks flag along with the power.no_pm flag
- Constify the pmu_bus bus type
- Minor spelling fixes"
* tag 'driver-core-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (43 commits)
rust: pci: display symbolic PCI vendor names
rust: pci: display symbolic PCI class names
rust: pci: fix incorrect platform reference in PCI driver probe doc comment
rust: pci: fix incorrect platform reference in PCI driver unbind doc comment
perf: make pmu_bus const
samples: rust: Add scoped debugfs sample driver
rust: debugfs: Add support for scoped directories
samples: rust: Add debugfs sample driver
rust: debugfs: Add support for callback-based files
rust: debugfs: Add support for writable files
rust: debugfs: Add support for read-only files
rust: debugfs: Add initial support for directories
driver core: auxiliary bus: Optimize logic of auxiliary_match_id()
driver core: auxiliary bus: Drop dev_pm_domain_detach() call
driver core: Fix order of the kernel-doc parameters
driver core: get_dev_from_fwnode(): document potential race
drivers: base: fix "publically"->"publicly"
driver core/PM: Set power.no_callbacks along with power.no_pm
driver core: faux: Set power.no_pm for faux devices
rust: pci: inline several tiny functions
...
|
|
The rust USB bindings as submitted are a good start, but they don't
really seem to be correct in a number of minor places, so just disable
them from the build entirely at this point in time. When they are ready
to be re-enabled, this commit can be reverted.
Acked-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add basic USB abstractions, consisting of usb::{Device, Interface,
Driver, Adapter, DeviceId} and the module_usb_driver macro. This is the
first step in being able to write USB device drivers, which paves the
way for USB media drivers - for example - among others.
This initial support will then be used by a subsequent sample driver,
which constitutes the only user of the USB abstractions so far.
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250825-b4-usb-v1-1-7aa024de7ae8@collabora.com
[ force USB = y for now - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Makes atomic set_bit and clear_bit inline functions as well as the
non-atomic variants __set_bit and __clear_bit available to Rust.
Adds a new MAINTAINERS section BITOPS API BINDINGS [RUST].
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Burak Emir <bqe@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
Makes the bitmap_copy_and_extend inline function available to Rust.
Adds F: to existing MAINTAINERS section BITMAP API BINDINGS [RUST].
-
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Burak Emir <bqe@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
Patch series "Add Rust abstraction for Maple Trees", v3.
This will be used in the Tyr driver [1] to allocate from the GPU's VA
space that is not owned by userspace, but by the kernel, for kernel GPU
mappings.
Danilo tells me that in nouveau, the maple tree is used for keeping track
of "VM regions" on top of GPUVM, and that he will most likely end up doing
the same in the Rust Nova driver as well.
These abstractions intentionally do not expose any way to make use of
external locking. You are required to use the internal spinlock. For
now, we do not support loads that only utilize rcu for protection.
This contains some parts taken from Andrew Ballance's RFC [2] from April.
However, it has also been reworked significantly compared to that RFC
taking the use-cases in Tyr into account.
This patch (of 3):
The maple tree will be used in the Tyr driver to allocate and keep track
of GPU allocations created internally (i.e. not by userspace). It will
likely also be used in the Nova driver eventually.
This adds the simplest methods for additional and removal that do not
require any special care with respect to concurrency.
This implementation is based on the RFC by Andrew but with significant
changes to simplify the implementation.
[ojeda@kernel.org: fix intra-doc links]
Link: https://lkml.kernel.org/r/20250910140212.997771-1-ojeda@kernel.org
Link: https://lkml.kernel.org/r/20250902-maple-tree-v3-0-fb5c8958fb1e@google.com
Link: https://lkml.kernel.org/r/20250902-maple-tree-v3-1-fb5c8958fb1e@google.com
Link: https://lore.kernel.org/r/20250627-tyr-v1-1-cb5f4c6ced46@collabora.com [1]
Link: https://lore.kernel.org/r/20250405060154.1550858-1-andrewjballance@gmail.com [2]
Co-developed-by: Andrew Ballance <andrewjballance@gmail.com>
Signed-off-by: Andrew Ballance <andrewjballance@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Daniel Almeida <daniel.almeida@collabora.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Trevor Gross <tmgross@umich.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We're generally not proponents of rewrites (nasty uncomfortable things
that make you late for dinner!). So why rewrite Binder?
Binder has been evolving over the past 15+ years to meet the evolving
needs of Android. Its responsibilities, expectations, and complexity
have grown considerably during that time. While we expect Binder to
continue to evolve along with Android, there are a number of factors
that currently constrain our ability to develop/maintain it. Briefly
those are:
1. Complexity: Binder is at the intersection of everything in Android and
fulfills many responsibilities beyond IPC. It has become many things
to many people, and due to its many features and their interactions
with each other, its complexity is quite high. In just 6kLOC it must
deliver transactions to the right threads. It must correctly parse
and translate the contents of transactions, which can contain several
objects of different types (e.g., pointers, fds) that can interact
with each other. It controls the size of thread pools in userspace,
and ensures that transactions are assigned to threads in ways that
avoid deadlocks where the threadpool has run out of threads. It must
track refcounts of objects that are shared by several processes by
forwarding refcount changes between the processes correctly. It must
handle numerous error scenarios and it combines/nests 13 different
locks, 7 reference counters, and atomic variables. Finally, It must
do all of this as fast and efficiently as possible. Minor performance
regressions can cause a noticeably degraded user experience.
2. Things to improve: Thousand-line functions [1], error-prone error
handling [2], and confusing structure can occur as a code base grows
organically. After more than a decade of development, this codebase
could use an overhaul.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/android/binder.c?h=v6.5#n2896
[2]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/android/binder.c?h=v6.5#n3658
3. Security critical: Binder is a critical part of Android's sandboxing
strategy. Even Android's most de-privileged sandboxes (e.g. the
Chrome renderer, or SW Codec) have direct access to Binder. More than
just about any other component, it's important that Binder provide
robust security, and itself be robust against security
vulnerabilities.
It's #1 (high complexity) that has made continuing to evolve Binder and
resolving #2 (tech debt) exceptionally difficult without causing #3
(security issues). For Binder to continue to meet Android's needs, we
need better ways to manage (and reduce!) complexity without increasing
the risk.
The biggest change is obviously the choice of programming language. We
decided to use Rust because it directly addresses a number of the
challenges within Binder that we have faced during the last years. It
prevents mistakes with ref counting, locking, bounds checking, and also
does a lot to reduce the complexity of error handling. Additionally,
we've been able to use the more expressive type system to encode the
ownership semantics of the various structs and pointers, which takes the
complexity of managing object lifetimes out of the hands of the
programmer, reducing the risk of use-after-frees and similar problems.
Rust has many different pointer types that it uses to encode ownership
semantics into the type system, and this is probably one of the most
important aspects of how it helps in Binder. The Binder driver has a lot
of different objects that have complex ownership semantics; some
pointers own a refcount, some pointers have exclusive ownership, and
some pointers just reference the object and it is kept alive in some
other manner. With Rust, we can use a different pointer type for each
kind of pointer, which enables the compiler to enforce that the
ownership semantics are implemented correctly.
Another useful feature is Rust's error handling. Rust allows for more
simplified error handling with features such as destructors, and you get
compilation failures if errors are not properly handled. This means that
even though Rust requires you to spend more lines of code than C on
things such as writing down invariants that are left implicit in C, the
Rust driver is still slightly smaller than C binder: Rust is 5.5kLOC and
C is 5.8kLOC. (These numbers are excluding blank lines, comments,
binderfs, and any debugging facilities in C that are not yet implemented
in the Rust driver. The numbers include abstractions in rust/kernel/
that are unlikely to be used by other drivers than Binder.)
Although this rewrite completely rethinks how the code is structured and
how assumptions are enforced, we do not fundamentally change *how* the
driver does the things it does. A lot of careful thought has gone into
the existing design. The rewrite is aimed rather at improving code
health, structure, readability, robustness, security, maintainability
and extensibility. We also include more inline documentation, and
improve how assumptions in the code are enforced. Furthermore, all
unsafe code is annotated with a SAFETY comment that explains why it is
correct.
We have left the binderfs filesystem component in C. Rewriting it in
Rust would be a large amount of work and requires a lot of bindings to
the file system interfaces. Binderfs has not historically had the same
challenges with security and complexity, so rewriting binderfs seems to
have lower value than the rest of Binder.
Correctness and feature parity
------------------------------
Rust binder passes all tests that validate the correctness of Binder in
the Android Open Source Project. We can boot a device, and run a variety
of apps and functionality without issues. We have performed this both on
the Cuttlefish Android emulator device, and on a Pixel 6 Pro.
As for feature parity, Rust binder currently implements all features
that C binder supports, with the exception of some debugging facilities.
The missing debugging facilities will be added before we submit the Rust
implementation upstream.
Tracepoints
-----------
I did not include all of the tracepoints as I felt that the mechansim
for making C access fields of Rust structs should be discussed on list
separately. I also did not include the support for building Rust Binder
as a module since that requires exporting a bunch of additional symbols
on the C side.
Original RFC Link with old benchmark numbers:
https://lore.kernel.org/r/20231101-rust-binder-v1-0-08ba9197f637@google.com
Co-developed-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Co-developed-by: Matt Gilbride <mattgilbride@google.com>
Signed-off-by: Matt Gilbride <mattgilbride@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250919-rust-binder-v2-1-a384b09f28dd@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is a wrapping layer of `include/linux/refcount.h`. Currently the
kernel refcount has already been used in `Arc`, however it calls into
FFI directly.
[boqun: Add the missing <> for the link in comment]
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Link: https://lore.kernel.org/r/20250723233312.3304339-2-gary@kernel.org
|
|
Memory barriers are building blocks for concurrent code, hence provide
a minimal set of them.
The compiler barrier, barrier(), is implemented in inline asm instead of
using core::sync::atomic::compiler_fence() because memory models are
different: kernel's atomics are implemented in inline asm therefore the
compiler barrier should be implemented in inline asm as well. Also it's
currently only public to the kernel crate until there's a reasonable
driver usage.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Link: https://lore.kernel.org/all/20250719030827.61357-10-boqun.feng@gmail.com/
|
|
In order to support LKMM atomics in Rust, add rust_helper_* for atomic
APIs. These helpers ensure the implementation of LKMM atomics in Rust is
the same as in C. This could save the maintenance burden of having two
similar atomic implementations in asm.
Originally-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/all/20250719030827.61357-2-boqun.feng@gmail.com/
|
|
Add support for large (> PAGE_SIZE) alignments in Rust allocators. All
the preparations on the C side are already done, we just need to add
bindings for <alloc>_node_align() functions and start using those.
Link: https://lkml.kernel.org/r/20250806125552.1727073-1-vitaly.wool@konsulko.se
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.se>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Alice Ryhl <aliceryhl@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jann Horn <jannh@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a new type to support specifying NUMA identifiers in Rust allocators
and extend the allocators to have NUMA id as a parameter. Thus, modify
ReallocFunc to use the new extended realloc primitives from the C side of
the kernel (i.e. k[v]realloc_node_align/vrealloc_node_align) and add the
new function alloc_node to the Allocator trait while keeping the existing
one (alloc) for backward compatibility.
This will allow to specify node to use for allocation of e. g. {KV}Box,
as well as for future NUMA aware users of the API.
[ojeda@kernel.org: fix missing import needed for `rusttest`]
Link: https://lkml.kernel.org/r/20250816210214.2729269-1-ojeda@kernel.org
Link: https://lkml.kernel.org/r/20250806125522.1726992-1-vitaly.wool@konsulko.se
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.se>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Alice Ryhl <aliceryhl@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jann Horn <jannh@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A lot of drivers only care about enabling the regulator for as long as
the underlying Device is bound. This can be easily observed due to the
extensive use of `devm_regulator_get_enable` and
`devm_regulator_get_enable_optional` throughout the kernel.
Therefore, make this helper available in Rust. Also add an example
noting how it should be the default API unless the driver needs more
fine-grained control over the regulator.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://patch.msgid.link/20250910-regulator-remove-dynamic-v3-2-07af4dfa97cc@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a safe Rust abstraction for the kernel's scatter-gather list
facilities (`struct scatterlist` and `struct sg_table`).
This commit introduces `SGTable<T>`, a wrapper that uses a generic
parameter to provide compile-time guarantees about ownership and lifetime.
The abstraction provides two primary states:
- `SGTable<Owned<P>>`: Represents a table whose resources are fully
managed by Rust. It takes ownership of a page provider `P`, allocates
the underlying `struct sg_table`, maps it for DMA, and handles all
cleanup automatically upon drop. The DMA mapping's lifetime is tied to
the associated device using `Devres`, ensuring it is correctly unmapped
before the device is unbound.
- `SGTable<Borrowed>` (or just `SGTable`): A zero-cost representation of
an externally managed `struct sg_table`. It is created from a raw
pointer using `SGTable::from_raw()` and provides a lifetime-bound
reference (`&'a SGTable`) for operations like iteration.
The API exposes a safe iterator that yields `&SGEntry` references,
allowing drivers to easily access the DMA address and length of each
segment in the list.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Co-developed-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Link: https://lore.kernel.org/r/20250828133323.53311-4-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add cpu_relax() helper in preparation for supporting
read_poll_timeout().
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://lore.kernel.org/r/20250821002055.3654160-2-fujita.tomonori@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add bindings to obtain a PCI device's resource start address, bus/
device function, revision ID and subsystem device and vendor IDs.
These will be used by the nova-core GPU driver which is currently in
development.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Benno Lossin <lossin@kernel.org>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Trevor Gross <tmgross@umich.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/r/20250730013417.640593-2-apopple@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
These accessors can be used to retrieve a irq::Registration or a
irq::ThreadedRegistration from a pci device. Alternatively, drivers can
retrieve an IrqRequest from a bound PCI device for later use.
These accessors ensure that only valid IRQ lines can ever be registered.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Joel Fernandes <joelagnelf@nvidia.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250811-topics-tyr-request_irq2-v9-6-0485dcd9bcbf@collabora.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
This patch adds support for non-threaded IRQs and handlers through
irq::Registration and the irq::Handler trait.
Registering an irq is dependent upon having a IrqRequest that was
previously allocated by a given device. This will be introduced in
subsequent patches.
Tested-by: Joel Fernandes <joelagnelf@nvidia.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250811-topics-tyr-request_irq2-v9-3-0485dcd9bcbf@collabora.com
[ Remove expect(dead_code) from Flags::into_inner(), add
expect(dead_code) to IrqRequest::new(), fix intra-doc links. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Enable a set of Clippy lints: 'ptr_as_ptr', 'ptr_cast_constness',
'as_ptr_cast_mut', 'as_underscore', 'cast_lossless' and
'ref_as_ptr'
These are intended to avoid type casts with the 'as' operator,
which are quite powerful, into restricted variants that are less
powerful and thus should help to avoid mistakes
- Remove the 'author' key now that most instances were moved to the
plural one in the previous cycle
'kernel' crate:
- New 'bug' module: add 'warn_on!' macro which reuses the existing
'BUG'/'WARN' infrastructure, i.e. it respects the usual sysctls and
kernel parameters:
warn_on!(value == 42);
To avoid duplicating the assembly code, the same strategy is
followed as for the static branch code in order to share the
assembly between both C and Rust
This required a few rearrangements on C arch headers -- the
existing C macros should still generate the same outputs, thus no
functional change expected there
- 'workqueue' module: add delayed work items, including a
'DelayedWork' struct, a 'impl_has_delayed_work!' macro and an
'enqueue_delayed' method, e.g.:
/// Enqueue the struct for execution on the system workqueue,
/// where its value will be printed 42 jiffies later.
fn print_later(value: Arc<MyStruct>) {
let _ = workqueue::system().enqueue_delayed(value, 42);
}
- New 'bits' module: add support for 'bit' and 'genmask' functions,
with runtime- and compile-time variants, e.g.:
static_assert!(0b00010000 == bit_u8(4));
static_assert!(0b00011110 == genmask_u8(1..=4));
assert!(checked_bit_u32(u32::BITS).is_none());
- 'uaccess' module: add 'UserSliceReader::strcpy_into_buf', which
reads NUL-terminated strings from userspace into a '&CStr'
Introduce 'UserPtr' newtype, similar in purpose to '__user' in C,
to minimize mistakes handling userspace pointers, including mixing
them up with integers and leaking them via the 'Debug' trait. Add
it to the prelude, too
- Start preparations for the replacement of our custom 'CStr' type
with the analogous type in the 'core' standard library. This will
take place across several cycles to make it easier. For this one,
it includes a new 'fmt' module, using upstream method names and
some other cleanups
Replace 'fmt!' with a re-export, which helps Clippy lint properly,
and clean up the found 'uninlined-format-args' instances
- 'dma' module:
- Clarify wording and be consistent in 'coherent' nomenclature
- Convert the 'read!()' and 'write!()' macros to return a 'Result'
- Add 'as_slice()', 'write()' methods in 'CoherentAllocation'
- Expose 'count()' and 'size()' in 'CoherentAllocation' and add
the corresponding type invariants
- Implement 'CoherentAllocation::dma_handle_with_offset()'
- 'time' module:
- Make 'Instant' generic over clock source. This allows the
compiler to assert that arithmetic expressions involving the
'Instant' use 'Instants' based on the same clock source
- Make 'HrTimer' generic over the timer mode. 'HrTimer' timers
take a 'Duration' or an 'Instant' when setting the expiry time,
depending on the timer mode. With this change, the compiler can
check the type matches the timer mode
- Add an abstraction for 'fsleep'. 'fsleep' is a flexible sleep
function that will select an appropriate sleep method depending
on the requested sleep time
- Avoid 64-bit divisions on 32-bit hardware when calculating
timestamps
- Seal the 'HrTimerMode' trait. This prevents users of the
'HrTimerMode' from implementing the trait on their own types
- Pass the correct timer mode ID to 'hrtimer_start_range_ns()'
- 'list' module: remove 'OFFSET' constants, allowing to remove
pointer arithmetic; now 'impl_list_item!' invokes
'impl_has_list_links!' or 'impl_has_list_links_self_ptr!'. Other
simplifications too
- 'types' module: remove 'ForeignOwnable::PointedTo' in favor of a
constant, which avoids exposing the type of the opaque pointer, and
require 'into_foreign' to return non-null
Remove the 'Either<L, R>' type as well. It is unused, and we want
to encourage the use of custom enums for concrete use cases
- 'sync' module: implement 'Borrow' and 'BorrowMut' for 'Arc' types
to allow them to be used in generic APIs
- 'alloc' module: implement 'Borrow' and 'BorrowMut' for 'Box<T, A>';
and 'Borrow', 'BorrowMut' and 'Default' for 'Vec<T, A>'
- 'Opaque' type: add 'cast_from' method to perform a restricted cast
that cannot change the inner type and use it in callers of
'container_of!'. Rename 'raw_get' to 'cast_into' to match it
- 'rbtree' module: add 'is_empty' method
- 'sync' module: new 'aref' submodule to hold 'AlwaysRefCounted' and
'ARef', which are moved from the too general 'types' module which
we want to reduce or eventually remove. Also fix a safety comment
in 'static_lock_class'
'pin-init' crate:
- Add 'impl<T, E> [Pin]Init<T, E> for Result<T, E>', so results are
now (pin-)initializers
- Add 'Zeroable::init_zeroed()' that delegates to 'init_zeroed()'
- New 'zeroed()', a safe version of 'mem::zeroed()' and also provide
it via 'Zeroable::zeroed()'
- Implement 'Zeroable' for 'Option<&T>', 'Option<&mut T>' and for
'Option<[unsafe] [extern "abi"] fn(...args...) -> ret>' for
'"Rust"' and '"C"' ABIs and up to 20 arguments
- Changed blanket impls of 'Init' and 'PinInit' from 'impl<T, E>
[Pin]Init<T, E> for T' to 'impl<T> [Pin]Init<T> for T'
- Renamed 'zeroed()' to 'init_zeroed()'
- Upstream dev news: improve CI more to deny warnings, use
'--all-targets'. Check the synchronization status of the two
'-next' branches in upstream and the kernel
MAINTAINERS:
- Add Vlastimil Babka, Liam R. Howlett, Uladzislau Rezki and Lorenzo
Stoakes as reviewers (thanks everyone)
And a few other cleanups and improvements"
* tag 'rust-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (76 commits)
rust: Add warn_on macro
arm64/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
riscv/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
x86/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
rust: kernel: move ARef and AlwaysRefCounted to sync::aref
rust: sync: fix safety comment for `static_lock_class`
rust: types: remove `Either<L, R>`
rust: kernel: use `core::ffi::CStr` method names
rust: str: add `CStr` methods matching `core::ffi::CStr`
rust: str: remove unnecessary qualification
rust: use `kernel::{fmt,prelude::fmt!}`
rust: kernel: add `fmt` module
rust: kernel: remove `fmt!`, fix clippy::uninlined-format-args
scripts: rust: emit path candidates in panic message
scripts: rust: replace length checks with match
rust: list: remove nonexistent generic parameter in link
rust: bits: add support for bits/genmask macros
rust: list: remove OFFSET constants
rust: list: add `impl_list_item!` examples
rust: list: use fully qualified path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core scheduler changes:
- Better tracking of maximum lag of tasks in presence of different
slices duration, for better handling of lag in the fair scheduler
(Vincent Guittot)
- Clean up and standardize #if/#else/#endif markers throughout the
entire scheduler code base (Ingo Molnar)
- Make SMP unconditional: build the SMP scheduler's data structures
and logic on UP kernel too, even though they are not used, to
simplify the scheduler and remove around 200 #ifdef/[#else]/#endif
blocks from the scheduler (Ingo Molnar)
- Reorganize cgroup bandwidth control interface handling for better
interfacing with sched_ext (Tejun Heo)
Balancing:
- Bump sd->max_newidle_lb_cost when newidle balance fails (Chris
Mason)
- Remove sched_domain_topology_level::flags to simplify the code
(Prateek Nayak)
- Simplify and clean up build_sched_topology() (Li Chen)
- Optimize build_sched_topology() on large machines (Li Chen)
Real-time scheduling:
- Add initial version of proxy execution: a mechanism for
mutex-owning tasks to inherit the scheduling context of higher
priority waiters.
Currently limited to a single runqueue and conditional on
CONFIG_EXPERT, and other limitations (John Stultz, Peter Zijlstra,
Valentin Schneider)
- Deadline scheduler (Juri Lelli):
- Fix dl_servers initialization order (Juri Lelli)
- Fix DL scheduler's root domain reinitialization logic (Juri
Lelli)
- Fix accounting bugs after global limits change (Juri Lelli)
- Fix scalability regression by implementing less agressive
dl_server handling (Peter Zijlstra)
PSI:
- Improve scalability by optimizing psi_group_change() cpu_clock()
usage (Peter Zijlstra)
Rust changes:
- Make Task, CondVar and PollCondVar methods inline to avoid
unnecessary function calls (Kunwu Chan, Panagiotis Foliadis)
- Add might_sleep() support for Rust code: Rust's "#[track_caller]"
mechanism is used so that Rust's might_sleep() doesn't need to be
defined as a macro (Fujita Tomonori)
- Introduce file_from_location() (Boqun Feng)
Debugging & instrumentation:
- Make clangd usable with scheduler source code files again (Peter
Zijlstra)
- tools: Add root_domains_dump.py which dumps root domains info (Juri
Lelli)
- tools: Add dl_bw_dump.py for printing bandwidth accounting info
(Juri Lelli)
Misc cleanups & fixes:
- Remove play_idle() (Feng Lee)
- Fix check_preemption_disabled() (Sebastian Andrzej Siewior)
- Do not call __put_task_struct() on RT if pi_blocked_on is set (Luis
Claudio R. Goncalves)
- Correct the comment in place_entity() (wang wei)"
* tag 'sched-core-2025-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits)
sched/idle: Remove play_idle()
sched: Do not call __put_task_struct() on rt if pi_blocked_on is set
sched: Start blocked_on chain processing in find_proxy_task()
sched: Fix proxy/current (push,pull)ability
sched: Add an initial sketch of the find_proxy_task() function
sched: Fix runtime accounting w/ split exec & sched contexts
sched: Move update_curr_task logic into update_curr_se
locking/mutex: Add p->blocked_on wrappers for correctness checks
locking/mutex: Rework task_struct::blocked_on
sched: Add CONFIG_SCHED_PROXY_EXEC & boot argument to enable/disable
sched/topology: Remove sched_domain_topology_level::flags
x86/smpboot: avoid SMT domain attach/destroy if SMT is not enabled
x86/smpboot: moves x86_topology to static initialize and truncate
x86/smpboot: remove redundant CONFIG_SCHED_SMT
smpboot: introduce SDTL_INIT() helper to tidy sched topology setup
tools/sched: Add dl_bw_dump.py for printing bandwidth accounting info
tools/sched: Add root_domains_dump.py which dumps root domains info
sched/deadline: Fix accounting after global limits change
sched/deadline: Reset extra_bw to max_bw when clearing root domains
sched/deadline: Initialize dl_servers after SMP
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The big change in this release is the addition of Rust bindings from
Daniel Almeida, allowing fairly basic consumer use with support for
enable and voltage setting operations. This should be good for the
vast majority of consumers.
Otherwise it's been quite quiet, a few new devices supported, plus
some cleanups and fixes.
Summary:
- Basic Rust bindings
- A fix for making large voltage changes on regulators where we limit
the size of voltage change we will do in one step, previously we
just got as close as we could in one step
- Cleanups of our usage of the PM autosuspend functions, this pulls
in some PM core changes on a shared tag
- Mode setting support for PCA9450
- Support for Mediatek MT6893 and MT8196 DVFSRC, Qualcomm PM7550 and
PMR735B, Raspberry Pi displays and TI TPS652G1
The TI driver pulls in the MFD portion of the support for the device
and the pinctrl driver which was in the same tag"
* tag 'regulator-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (40 commits)
regulator: mt6370: Fix spelling mistake in mt6370_regualtor_register
regulator: Kconfig: Fix spelling mistake "regualtor" -> "regulator"
regulator: core: repeat voltage setting request for stepped regulators
regulator: rt6160: Add rt6166 vout min_uV setting for compatible
MAINTAINERS: add regulator.rs to the regulator API entry
rust: regulator: add a bare minimum regulator abstraction
regulator: tps6286x-regulator: Fix a copy & paste error
regulator: qcom-rpmh: add support for pm7550 regulators
regulator: qcom-rpmh: add support for pmr735b regulators
regulator: dt-bindings: qcom,rpmh: Add PMR735B compatible
regulator: dt-bindings: qcom,rpmh: Add PM7550 compatible
regulator: tps6594-regulator: Add TI TPS652G1 PMIC regulators
regulator: tps6594-regulator: refactor variant descriptions
regulator: tps6594-regulator: remove hardcoded buck config
regulator: tps6594-regulator: remove interrupt_count
dt-bindings: mfd: ti,tps6594: Add TI TPS652G1 PMIC
pinctrl: pinctrl-tps6594: Add TPS652G1 PMIC pinctrl and GPIO
misc: tps6594-pfsm: Add TI TPS652G1 PMIC PFSM
mfd: tps6594: Add TI TPS652G1 support
regulator: sy8827n: make enable gpio NONEXCLUSIVE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs rust updates from Christian Brauner:
- Allow poll_table pointers to be NULL
- Add Rust files to vfs MAINTAINERS entry
* tag 'vfs-6.17-rc1.rust' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: add Rust files to MAINTAINERS
poll: rust: allow poll_table ptrs to be null
|
|
Add warn_on macro, uses the BUG/WARN feature (lib/bug.c) via assembly
for x86_64/arm64/riscv.
The current Rust code simply wraps BUG() macro but doesn't provide the
proper debug information. The BUG/WARN feature can only be used from
assembly.
This uses the assembly code exported by the C side via ARCH_WARN_ASM
macro. To avoid duplicating the assembly code, this approach follows
the same strategy as the static branch code: it generates the assembly
code for Rust using the C preprocessor at compile time.
Similarly, ARCH_WARN_REACHABLE is also used at compile time to
generate the assembly code; objtool's reachable annotation code. It's
used for only architectures that use objtool.
For now, Loongarch and arm just use a wrapper for WARN macro.
UML doesn't use the assembly BUG/WARN feature; just wrapping generic
BUG/WARN functions implemented in C works.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250502094537.231725-5-fujita.tomonori@gmail.com
[ Avoid evaluating the condition twice (a good idea in general,
but it also matches the C side). Simplify with `as_char_ptr()`
to avoid a cast. Cast to `ffi` integer types for
`warn_slowpath_fmt`. Avoid cast for `null()`. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add a generic iomem abstraction to safely read and write ioremapped
regions. This abstraction requires a previously acquired IoRequest
instance. This makes it so that both the resource and the device match,
or, in other words, that the resource is indeed a valid resource for a
given bound device.
A subsequent patch will add the ability to retrieve IoRequest instances
from platform devices.
The reads and writes are done through IoRaw, and are thus checked either
at compile-time, if the size of the region is known at that point, or at
runtime otherwise.
Non-exclusive access to the underlying memory region is made possible to
cater to cases where overlapped regions are unavoidable.
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250717-topics-tyr-platform_iomem-v15-2-beca780b77e3@collabora.com
[ Add #[expect(dead_code)] to avoid a temporary warning, remove
unnecessary OF_ID_TABLE constants in doc-tests and ignore doc-tests
for now to avoid a temporary build failure. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
In preparation for ioremap support, add a Rust abstraction for struct
resource.
A future commit will introduce the Rust API to ioremap a resource from a
platform device. The current abstraction, therefore, adds only the
minimum API needed to get that done.
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Co-developed-by: Fiona Behrens <me@kloenk.dev>
Signed-off-by: Fiona Behrens <me@kloenk.dev>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250717-topics-tyr-platform_iomem-v15-1-beca780b77e3@collabora.com
[ Capitalize safety comments and end it with a period. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Implement `dma_set_mask()`, `dma_set_coherent_mask()` and
`dma_set_mask_and_coherent()` in the `dma::Device` trait.
Those methods are used to set up the device's DMA addressing
capabilities.
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250716150354.51081-3-dakr@kernel.org
[ Add DmaMask::try_new(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
https://github.com/Rust-for-Linux/linux into rust-next
Pull timekeeping updates from Andreas Hindborg:
- Make 'Instant' generic over clock source. This allows the compiler to
assert that arithmetic expressions involving the 'Instant' use
'Instants' based on the same clock source.
- Make 'HrTimer' generic over the timer mode. 'HrTimer' timers take a
'Duration' or an 'Instant' when setting the expiry time, depending on
the timer mode. With this change, the compiler can check the type
matches the timer mode.
- Add an abstraction for 'fsleep'. 'fsleep' is a flexible sleep
function that will select an appropriate sleep method depending on
the requested sleep time.
- Avoid 64-bit divisions on 32-bit hardware when calculating
timestamps.
- Seal the 'HrTimerMode' trait. This prevents users of the
'HrTimerMode' from implementing the trait on their own types.
* tag 'rust-timekeeping-for-v6.17' of https://github.com/Rust-for-Linux/linux:
rust: time: Add wrapper for fsleep() function
rust: time: Seal the HrTimerMode trait
rust: time: Remove Ktime in hrtimer
rust: time: Make HasHrTimer generic over HrTimerMode
rust: time: Add HrTimerExpires trait
rust: time: Replace HrTimerMode enum with trait-based mode types
rust: time: Add ktime_get() to ClockSource trait
rust: time: Make Instant generic over ClockSource
rust: time: Replace ClockId enum with ClockSource trait
rust: time: Avoid 64-bit integer division on 32-bit architectures
|
|
Add a bare minimum regulator abstraction to be used by Rust drivers.
This abstraction adds a small subset of the regulator API, which is
thought to be sufficient for the drivers we have now.
Regulators provide the power needed by many hardware blocks and thus are
likely to be needed by a lot of drivers.
It was tested on rk3588, where it was used to power up the "mali"
regulator in order to power up the GPU.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20250714-topics-tyr-regulator2-v8-1-c7ab3955d524@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The helper includes should be sorted alphabetically as indicated by the
comment at the top of the file, but they were not. Sort them properly.
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1174
Signed-off-by: Krishna Ketan Rai <prafulrai522@gmail.com>
Link: https://lore.kernel.org/r/20250629152533.889-1-prafulrai522@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Avoid merge conflicts
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
It's possible for a poll_table to be null. This can happen if an
end-user just wants to know if a resource has events right now without
registering a waiter for when events become available. Furthermore,
these null pointers should be handled transparently by the API, so we
should not change `from_ptr` to return an `Option`. Thus, change
`PollTable` to wrap a raw pointer rather than use a reference so that
you can pass null.
Comments mentioning `struct poll_table` are changed to just `poll_table`
since `poll_table` is a typedef. (It's a typedef because it's supposed
to be opaque.)
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
Take advantage of the generic drvdata accessors of the generic Device
type.
While at it, use from_result() instead of match.
Link: https://lore.kernel.org/r/20250621195118.124245-6-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Take advantage of the generic drvdata accessors of the generic Device
type.
While at it, use from_result() instead of match.
Link: https://lore.kernel.org/r/20250621195118.124245-5-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Take advantage of the generic drvdata accessors of the generic Device
type.
While at it, use from_result() instead of match.
Link: https://lore.kernel.org/r/20250621195118.124245-4-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Implement generic accessors for the private data of a driver bound to a
device.
Those accessors should be used by bus abstractions from their
corresponding core callbacks, such as probe(), remove(), etc.
Implementing them for device::CoreInternal guarantees that driver's can't
interfere with the logic implemented by the bus abstraction.
Acked-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250621195118.124245-3-dakr@kernel.org
[ Improve safety comment as proposed by Benno. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add a wrapper for fsleep(), flexible sleep functions in
include/linux/delay.h which typically deals with hardware delays.
The kernel supports several sleep functions to handle various lengths
of delay. This adds fsleep(), automatically chooses the best sleep
method based on a duration.
fsleep() can only be used in a nonatomic context. This requirement is
not checked by these abstractions, but it is intended that klint [1]
or a similar tool will be used to check it in the future.
Link: https://rust-for-linux.com/klint [1]
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://lore.kernel.org/r/20250617144155.3903431-3-fujita.tomonori@gmail.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
Replace Devres::new_foreign_owned() with devres::register().
The current implementation of Devres::new_foreign_owned() creates a full
Devres container instance, including the internal Revocable and
completion.
However, none of that is necessary for the intended use of giving full
ownership of an object to devres and getting it dropped once the given
device is unbound.
Hence, implement devres::register(), which is limited to consume the
given data, wrap it in a KBox and drop the KBox once the given device is
unbound, without any other synchronization.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250626200054.243480-3-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Implement FwNode::is_of_node() in order to check whether a FwNode
instance is embedded in a struct device_node.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://lore.kernel.org/r/20250620151504.278766-1-igor.korotin.linux@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add a helper function equivalent to the C's might_sleep(), which
serves as a debugging aid and a potential scheduling point.
Note that this function can only be used in a nonatomic context.
This will be used by Rust version of read_poll_timeout().
[boqun: Use file_from_location() to get a C string instead of changing
__might_sleep()]
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250619151007.61767-3-boqun.feng@gmail.com
|
|
We need the driver-core fixes that are in 6.16-rc3 into here as well
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Fix a race condition in Devres::drop(). This depends on two other
patches:
- (Minimal) Rust abstractions for struct completion
- Let Revocable indicate whether its data is already being revoked
- Fix Devres to avoid exposing the internal Revocable
- Add .mailmap entry for Danilo Krummrich
- Add Madhavan Srinivasan to embargoed-hardware-issues.rst
* tag 'driver-core-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
Documentation: embargoed-hardware-issues.rst: Add myself for Power
mailmap: add entry for Danilo Krummrich
rust: devres: do not dereference to the internal Revocable
rust: devres: fix race in Devres::drop()
rust: revocable: indicate whether `data` has been revoked already
rust: completion: implement initial abstraction
|
|
Introduce the ktime_get() associated function to the ClockSource
trait, allowing each clock source to specify how it retrieves the
current time. This enables Instant::now() to be implemented
generically using the type-level ClockSource abstraction.
This change enhances the type safety and extensibility of timekeeping
by statically associating time retrieval mechanisms with their
respective clock types. It also reduces the reliance on hardcoded
clock logic within Instant.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://lore.kernel.org/r/20250610093258.3435874-4-fujita.tomonori@gmail.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
Avoid 64-bit integer division that 32-bit architectures don't
implement generally. This uses ktime_to_us() and ktime_to_ms()
instead.
The time abstraction needs i64 / u32 division so C's div_s64() can be
used but ktime_to_us() and ktime_to_ms() provide a simpler solution
for this time abstraction problem on 32-bit architectures.
32-bit ARM is the only 32-bit architecture currently supported by
Rust. Using the cfg attribute, only 32-bit architectures will call
ktime_to_us() and ktime_to_ms(), while the other 64-bit architectures
will continue to use the current code as-is to avoid the overhead.
One downside of calling the C's functions is that the as_micros/millis
methods can no longer be const fn. We stick with the simpler approach
unless there's a compelling need for a const fn.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250502004524.230553-1-fujita.tomonori@gmail.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
Implement a minimal abstraction for the completion synchronization
primitive.
This initial abstraction only adds complete_all() and
wait_for_completion(), since that is what is required for the subsequent
Devres patch.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250612121817.1621-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
