| Age | Commit message (Collapse) | Author |
|---|
|
Eryk reported an issue that I have put under Closes: tag, related to
umem addrs being prematurely produced onto pool's completion queue.
Let us make the skb's destructor responsible for producing all addrs
that given skb used.
Commit from fixes tag introduced the buggy behavior, it was not broken
from day 1, but rather when xsk multi-buffer got introduced.
In order to mitigate performance impact as much as possible, mimic the
linear and frag parts within skb by storing the first address from XSK
descriptor at sk_buff::destructor_arg. For fragments, store them at ::cb
via list. The nodes that will go onto list will be allocated via
kmem_cache. xsk_destruct_skb() will consume address stored at
::destructor_arg and optionally go through list from ::cb, if count of
descriptors associated with this particular skb is bigger than 1.
Previous approach where whole array for storing UMEM addresses from XSK
descriptors was pre-allocated during first fragment processing yielded
too big performance regression for 64b traffic. In current approach
impact is much reduced on my tests and for jumbo frames I observed
traffic being slower by at most 9%.
Magnus suggested to have this way of processing special cased for
XDP_SHARED_UMEM, so we would identify this during bind and set different
hooks for 'backpressure mechanism' on CQ and for skb destructor, but
given that results looked promising on my side I decided to have a
single data path for XSK generic Tx. I suppose other auxiliary stuff
would have to land as well in order to make it work.
Fixes: b7f72a30e9ac ("xsk: introduce wrappers and helpers for supporting multi-buffer in Tx path")
Reported-by: Eryk Kubanski <e.kubanski@partner.samsung.com>
Closes: https://lore.kernel.org/netdev/20250530103456.53564-1-e.kubanski@partner.samsung.com/
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20250904194907.2342177-1-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
If a GSO skb is sent through a Geneve tunnel and if Geneve options are
added, the split GSO skb might not fit in the MTU anymore and an ICMP
frag needed packet can be generated. In such case the ICMP packet might
go through the segmentation logic (and dropped) later if it reaches a
path were the GSO status is checked and segmentation is required.
This is especially true when an OvS bridge is used with a Geneve tunnel
attached to it. The following set of actions could lead to the ICMP
packet being wrongfully segmented:
1. An skb is constructed by the TCP layer (e.g. gso_type SKB_GSO_TCPV4,
segs >= 2).
2. The skb hits the OvS bridge where Geneve options are added by an OvS
action before being sent through the tunnel.
3. When the skb is xmited in the tunnel, the split skb does not fit
anymore in the MTU and iptunnel_pmtud_build_icmp is called to
generate an ICMP fragmentation needed packet. This is done by reusing
the original (GSO!) skb. The GSO metadata is not cleared.
4. The ICMP packet being sent back hits the OvS bridge again and because
skb_is_gso returns true, it goes through queue_gso_packets...
5. ...where __skb_gso_segment is called. The skb is then dropped.
6. Note that in the above example on re-transmission the skb won't be a
GSO one as it would be segmented (len > MSS) and the ICMP packet
should go through.
Fix this by resetting the GSO information before reusing an skb in
iptunnel_pmtud_build_icmp and iptunnel_pmtud_build_icmpv6.
Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets")
Reported-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://patch.msgid.link/20250904125351.159740-1-atenart@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The bridge driver currently tolerates options that it does not recognize.
Instead, it should bounce them.
Fixes: a428afe82f98 ("net: bridge: add support for user-controlled bool options")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/e6fdca3b5a8d54183fbda075daffef38bdd7ddce.1757070067.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Per family bind/unbind callbacks were introduced to allow families
to track multicast group consumer presence, e.g. to start or stop
producing events depending on listeners.
However, in genl_bind() the bind() callback was invoked even if
capability checks failed and ret was set to -EPERM. This means that
callbacks could run on behalf of unauthorized callers while the
syscall still returned failure to user space.
Fix this by only invoking bind() after "if (ret) break;" check
i.e. after permission checks have succeeded.
Fixes: 3de21a8990d3 ("genetlink: Add per family bind/unbind callbacks")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250905135731.3026965-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
xs_sock_recv_cmsg was failing to call xs_sock_process_cmsg for any cmsg
type other than TLS_RECORD_TYPE_ALERT (TLS_RECORD_TYPE_DATA, and other
values not handled.) Based on my reading of the previous commit
(cc5d5908: sunrpc: fix client side handling of tls alerts), it looks
like only iov_iter_revert should be conditional on TLS_RECORD_TYPE_ALERT
(but that other cmsg types should still call xs_sock_process_cmsg). On
my machine, I was unable to connect (over mtls) to an NFS share hosted
on FreeBSD. With this patch applied, I am able to mount the share again.
Fixes: cc5d59081fa2 ("sunrpc: fix client side handling of tls alerts")
Signed-off-by: Justin Worrell <jworrell@gmail.com>
Reviewed-and-tested-by: Scott Mayhew <smayhew@redhat.com>
Link: https://lore.kernel.org/r/20250904211038.12874-3-jworrell@gmail.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
This reverts commit 14e41b16e8cb677bb440dca2edba8b041646c742.
This patch breaks the LTP acct02 test, so let's revert and look for a
better solution.
Reported-by: Mark Brown <broonie@kernel.org>
Reported-by: Harshvardhan Jha <harshvardhan.j.jha@oracle.com>
Link: https://lore.kernel.org/linux-nfs/7d4d57b0-39a3-49f1-8ada-60364743e3b4@sirena.org.uk/
Cc: stable@vger.kernel.org # 6.15.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
1) Fix a silly bug in conntrack selftest, busyloop may get optimized to
for (;;), reported by Yi Chen.
2) Introduce new NFTA_DEVICE_PREFIX attribute in nftables netlink api,
re-using old NFTA_DEVICE_NAME led to confusion with different
kernel/userspace versions. This refines the wildcard interface
support added in 6.16 release. From Phil Sutter.
* tag 'nf-25-09-04' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: Introduce NFTA_DEVICE_PREFIX
selftests: netfilter: fix udpclash tool hang
====================
Link: https://patch.msgid.link/20250904072548.3267-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When device_register() return error in atm_register_sysfs(), which can be
triggered by kzalloc fail in device_private_init() or other reasons,
kmemleak reports the following memory leaks:
unreferenced object 0xffff88810182fb80 (size 8):
comm "insmod", pid 504, jiffies 4294852464
hex dump (first 8 bytes):
61 64 75 6d 6d 79 30 00 adummy0.
backtrace (crc 14dfadaf):
__kmalloc_node_track_caller_noprof+0x335/0x450
kvasprintf+0xb3/0x130
kobject_set_name_vargs+0x45/0x120
dev_set_name+0xa9/0xe0
atm_register_sysfs+0xf3/0x220
atm_dev_register+0x40b/0x780
0xffffffffa000b089
do_one_initcall+0x89/0x300
do_init_module+0x27b/0x7d0
load_module+0x54cd/0x5ff0
init_module_from_file+0xe4/0x150
idempotent_init_module+0x32c/0x610
__x64_sys_finit_module+0xbd/0x120
do_syscall_64+0xa8/0x270
entry_SYSCALL_64_after_hwframe+0x77/0x7f
When device_create_file() return error in atm_register_sysfs(), the same
issue also can be triggered.
Function put_device() should be called to release kobj->name memory and
other device resource, instead of kfree().
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901063537.1472221-1-wangliang74@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This new attribute is supposed to be used instead of NFTA_DEVICE_NAME
for simple wildcard interface specs. It holds a NUL-terminated string
representing an interface name prefix to match on.
While kernel code to distinguish full names from prefixes in
NFTA_DEVICE_NAME is simpler than this solution, reusing the existing
attribute with different semantics leads to confusion between different
versions of kernel and user space though:
* With old kernels, wildcards submitted by user space are accepted yet
silently treated as regular names.
* With old user space, wildcards submitted by kernel may cause crashes
since libnftnl expects NUL-termination when there is none.
Using a distinct attribute type sanitizes these situations as the
receiving part detects and rejects the unexpected attribute nested in
*_HOOK_DEVS attributes.
Fixes: 6d07a289504a ("netfilter: nf_tables: Support wildcard netdev hook specs")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Bernard Pidoux reported a regression apparently caused by commit
c353e8983e0d ("net: introduce per netns packet chains").
skb->dev becomes NULL and we crash in __netif_receive_skb_core().
Before above commit, different kind of bugs or corruptions could happen
without a major crash.
But the root cause is that ax25_kiss_rcv() can queue/mangle input skb
without checking if this skb is shared or not.
Many thanks to Bernard Pidoux for his help, diagnosis and tests.
We had a similar issue years ago fixed with commit 7aaed57c5c28
("phonet: properly unshare skbs in phonet_rcv()").
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Bernard Pidoux <f6bvp@free.fr>
Closes: https://lore.kernel.org/netdev/1713f383-c538-4918-bc64-13b3288cd542@free.fr/
Tested-by: Bernard Pidoux <f6bvp@free.fr>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Joerg Reuter <jreuter@yaina.de>
Cc: David Ranch <dranch@trinnet.net>
Cc: Folkert van Heusden <folkert@vanheusden.com>
Reviewed-by: Dan Cross <crossd@gmail.com>
Link: https://patch.msgid.link/20250902124642.212705-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mctp_getsockopt(), unrecognized options currently return -EINVAL.
In contrast, mctp_setsockopt() returns -ENOPROTOOPT for unknown
options.
Update mctp_getsockopt() to also return -ENOPROTOOPT for unknown
options. This aligns the behavior of getsockopt() and setsockopt(),
and matches the standard kernel socket API convention for handling
unsupported options.
Fixes: 99ce45d5e7db ("mctp: Implement extended addressing")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250902102059.1370008-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently SMC code is validating the reserved bits while parsing the incoming
CLC decline message & when this validation fails, its treated as a protocol
error. As a result, the SMC connection is terminated instead of falling back to
TCP. As per RFC7609[1] specs we shouldn't be validating the reserved bits that
is part of CLC message. This patch fixes this issue.
CLC Decline message format can viewed here[2].
[1] https://datatracker.ietf.org/doc/html/rfc7609#page-92
[2] https://datatracker.ietf.org/doc/html/rfc7609#page-105
Fixes: 8ade200c269f ("net/smc: add v2 format of CLC decline message")
Signed-off-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/20250902082041.98996-1-mjambigi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The inetdev_init() function never returns NULL. Check for error
pointers instead.
Fixes: 22600596b675 ("ipv4: give an IPv4 dev to blackhole_netdev")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/aLaQWL9NguWmeM1i@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Followup of commit c51da3f7a161 ("net: remove sock_i_uid()")
A recent syzbot report was the trigger for this change.
Over the years, we had many problems caused by the
read_lock[_bh](&sk->sk_callback_lock) in sock_i_uid().
We could fix smc_diag_dump_proto() or make a more radical move:
Instead of waiting for new syzbot reports, cache the socket
inode number in sk->sk_ino, so that we no longer
need to acquire sk->sk_callback_lock in sock_i_ino().
This makes socket dumps faster (one less cache line miss,
and two atomic ops avoided).
Prior art:
commit 25a9c8a4431c ("netlink: Add __sock_i_ino() for __netlink_diag_dump().")
commit 4f9bf2a2f5aa ("tcp: Don't acquire inet_listen_hashbucket::lock with disabled BH.")
commit efc3dbc37412 ("rds: Make rds_sock_lock BH rather than IRQ safe.")
Fixes: d2d6422f8bd1 ("x86: Allow to enable PREEMPT_RT.")
Reported-by: syzbot+50603c05bbdf4dfdaffa@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68b73804.050a0220.3db4df.01d8.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250902183603.740428-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a few updates:
- a set of buffer overflow fixes
- ath11k: a fix for GTK rekeying
- ath12k: a missed WiFi7 capability
* tag 'wireless-2025-09-03' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: wilc1000: avoid buffer overflow in WID string configuration
wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()
wifi: libertas: cap SSID len in lbs_associate()
wifi: cw1200: cap SSID length in cw1200_do_join()
wifi: ath11k: fix group data packet drops during rekey
wifi: ath12k: Set EMLSR support flag in MLO flags for EML-capable stations
====================
Link: https://patch.msgid.link/20250903075602.30263-4-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the ssid->datalen is more than IEEE80211_MAX_SSID_LEN (32) it would
lead to memory corruption so add some bounds checking.
Fixes: c38c70185101 ("wifi: cfg80211: Set SSID if it is not already set")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/0aaaae4a3ed37c6252363c34ae4904b1604e8e32.1756456951.git.dan.carpenter@linaro.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
devconf->rpl_seg_enabled can be changed concurrently from
/proc/sys/net/ipv6/conf, annotate lockless reads on it.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20250901123726.1972881-2-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When tcp_ao_copy_all_matching() fails in tcp_v6_syn_recv_sock() it just
exits the function. This ends up causing a memory-leak:
unreferenced object 0xffff0000281a8200 (size 2496):
comm "softirq", pid 0, jiffies 4295174684
hex dump (first 32 bytes):
7f 00 00 06 7f 00 00 06 00 00 00 00 cb a8 88 13 ................
0a 00 03 61 00 00 00 00 00 00 00 00 00 00 00 00 ...a............
backtrace (crc 5ebdbe15):
kmemleak_alloc+0x44/0xe0
kmem_cache_alloc_noprof+0x248/0x470
sk_prot_alloc+0x48/0x120
sk_clone_lock+0x38/0x3b0
inet_csk_clone_lock+0x34/0x150
tcp_create_openreq_child+0x3c/0x4a8
tcp_v6_syn_recv_sock+0x1c0/0x620
tcp_check_req+0x588/0x790
tcp_v6_rcv+0x5d0/0xc18
ip6_protocol_deliver_rcu+0x2d8/0x4c0
ip6_input_finish+0x74/0x148
ip6_input+0x50/0x118
ip6_sublist_rcv+0x2fc/0x3b0
ipv6_list_rcv+0x114/0x170
__netif_receive_skb_list_core+0x16c/0x200
netif_receive_skb_list_internal+0x1f0/0x2d0
This is because in tcp_v6_syn_recv_sock (and the IPv4 counterpart), when
exiting upon error, inet_csk_prepare_forced_close() and tcp_done() need
to be called. They make sure the newsk will end up being correctly
free'd.
tcp_v4_syn_recv_sock() makes this very clear by having the put_and_exit
label that takes care of things. So, this patch here makes sure
tcp_v4_syn_recv_sock and tcp_v6_syn_recv_sock have similar
error-handling and thus fixes the leak for TCP-AO.
Fixes: 06b22ef29591 ("net/tcp: Wire TCP-AO to request sockets")
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250830-tcpao_leak-v1-1-e5878c2c3173@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As of commit f5d83cf0eeb9 ("net: mctp: unshare packets when
reassembling"), we skb_unshare() in mctp_frag_queue(). The unshare may
invalidate the original skb pointer, so we need to treat the skb as
entirely owned by the fraq queue, even on failure.
Fixes: f5d83cf0eeb9 ("net: mctp: unshare packets when reassembling")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250829-mctp-skb-unshare-v1-1-1c28fe10235a@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
BUG: kernel NULL pointer dereference, address: 00000000000002ec
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
CPU: 28 UID: 0 PID: 343 Comm: kworker/28:1 Kdump: loaded Tainted: G OE 6.17.0-rc2+ #9 NONE
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Workqueue: smc_hs_wq smc_listen_work [smc]
RIP: 0010:smc_ib_is_sg_need_sync+0x9e/0xd0 [smc]
...
Call Trace:
<TASK>
smcr_buf_map_link+0x211/0x2a0 [smc]
__smc_buf_create+0x522/0x970 [smc]
smc_buf_create+0x3a/0x110 [smc]
smc_find_rdma_v2_device_serv+0x18f/0x240 [smc]
? smc_vlan_by_tcpsk+0x7e/0xe0 [smc]
smc_listen_find_device+0x1dd/0x2b0 [smc]
smc_listen_work+0x30f/0x580 [smc]
process_one_work+0x18c/0x340
worker_thread+0x242/0x360
kthread+0xe7/0x220
ret_from_fork+0x13a/0x160
ret_from_fork_asm+0x1a/0x30
</TASK>
If the software RoCE device is used, ibdev->dma_device is a null pointer.
As a result, the problem occurs. Null pointer detection is added to
prevent problems.
Fixes: 0ef69e788411c ("net/smc: optimize for smc_sndbuf_sync_sg_for_device and smc_rmb_sync_sg_for_cpu")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Link: https://patch.msgid.link/20250828124117.2622624-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- fix OOB read/write in network-coding decode, by Stanislav Fort
* tag 'batadv-net-pullrequest-20250901' of https://git.open-mesh.org/linux-merge:
batman-adv: fix OOB read/write in network-coding decode
====================
Link: https://patch.msgid.link/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The icmp_ndo_send function was originally introduced to ensure proper
rate limiting when icmp_send is called by a network device driver,
where the packet's source address may have already been transformed
by SNAT.
However, the original implementation only considers the
IP_CT_DIR_ORIGINAL direction for SNAT and always replaced the packet's
source address with that of the original-direction tuple. This causes
two problems:
1. For SNAT:
Reply-direction packets were incorrectly translated using the source
address of the CT original direction, even though no translation is
required.
2. For DNAT:
Reply-direction packets were not handled at all. In DNAT, the original
direction's destination is translated. Therefore, in the reply
direction the source address must be set to the reply-direction
source, so rate limiting works as intended.
Fix this by using the connection direction to select the correct tuple
for source address translation, and adjust the pre-checks to handle
reply-direction packets in case of DNAT.
Additionally, wrap the `ct->status` access in READ_ONCE(). This avoids
possible KCSAN reports about concurrent updates to `ct->status`.
Fixes: 0b41713b6066 ("icmp: introduce helper for nat'd source address in network device context")
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- vhci: Prevent use-after-free by removing debugfs files early
- L2CAP: Fix use-after-free in l2cap_sock_cleanup_listen()
* tag 'for-net-2025-08-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: Fix use-after-free in l2cap_sock_cleanup_listen()
Bluetooth: vhci: Prevent use-after-free by removing debugfs files early
====================
Link: https://patch.msgid.link/20250829191210.1982163-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
x->id.spi == 0 means "no SPI assigned", but since commit
94f39804d891 ("xfrm: Duplicate SPI Handling"), we now create states
and add them to the byspi list with this value.
__xfrm_state_delete doesn't remove those states from the byspi list,
since they shouldn't be there, and this shows up as a UAF the next
time we go through the byspi list.
Reported-by: syzbot+a25ee9d20d31e483ba7b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a25ee9d20d31e483ba7b
Fixes: 94f39804d891 ("xfrm: Duplicate SPI Handling")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
batadv_nc_skb_decode_packet() trusts coded_len and checks only against
skb->len. XOR starts at sizeof(struct batadv_unicast_packet), reducing
payload headroom, and the source skb length is not verified, allowing an
out-of-bounds read and a small out-of-bounds write.
Validate that coded_len fits within the payload area of both destination
and source sk_buffs before XORing.
Fixes: 2df5278b0267 ("batman-adv: network coding - receive coded packets and decode them")
Cc: stable@vger.kernel.org
Reported-by: Stanislav Fort <disclosure@aisle.com>
Signed-off-by: Stanislav Fort <stanislav.fort@aisle.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
syzbot reported a WARNING in est_timer() [1]
Problem here is that with CONFIG_PREEMPT_RT=y, timer callbacks
can be preempted.
Adopt preempt_disable_nested()/preempt_enable_nested() to fix this.
[1]
WARNING: CPU: 0 PID: 16 at ./include/linux/seqlock.h:221 __seqprop_assert include/linux/seqlock.h:221 [inline]
WARNING: CPU: 0 PID: 16 at ./include/linux/seqlock.h:221 est_timer+0x6dc/0x9f0 net/core/gen_estimator.c:93
Modules linked in:
CPU: 0 UID: 0 PID: 16 Comm: ktimers/0 Not tainted syzkaller #0 PREEMPT_{RT,(full)}
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:__seqprop_assert include/linux/seqlock.h:221 [inline]
RIP: 0010:est_timer+0x6dc/0x9f0 net/core/gen_estimator.c:93
Call Trace:
<TASK>
call_timer_fn+0x17e/0x5f0 kernel/time/timer.c:1747
expire_timers kernel/time/timer.c:1798 [inline]
__run_timers kernel/time/timer.c:2372 [inline]
__run_timer_base+0x648/0x970 kernel/time/timer.c:2384
run_timer_base kernel/time/timer.c:2393 [inline]
run_timer_softirq+0xb7/0x180 kernel/time/timer.c:2403
handle_softirqs+0x22c/0x710 kernel/softirq.c:579
__do_softirq kernel/softirq.c:613 [inline]
run_ktimerd+0xcf/0x190 kernel/softirq.c:1043
smpboot_thread_fn+0x53f/0xa60 kernel/smpboot.c:160
kthread+0x70e/0x8a0 kernel/kthread.c:463
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Fixes: d2d6422f8bd1 ("x86: Allow to enable PREEMPT_RT.")
Reported-by: syzbot+72db9ee39db57c3fecc5@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68adf6fa.a70a0220.3cafd4.0000.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250827162352.3960779-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter updates for net
1) Remove bogus WARN_ON in br_netfilter that came in 6.8.
This is now more prominent due to
commit 2d72afb34065 ("netfilter: nf_conntrack: fix crash due to
removal of uninitialised entry"). From Wang Liang.
2) Better error reporting when a helper module clashes with
an existing helper name: -EEXIST makes modprobe believe that
the module is already loaded, so error message is elided.
From Phil Sutter.
* tag 'nf-25-08-27' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: conntrack: helper: Replace -EEXIST by -EBUSY
netfilter: br_netfilter: do not check confirmed bit in br_nf_local_in() after confirm
====================
Link: https://patch.msgid.link/20250827133900.16552-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Some fixes for the current cycle:
- mt76: MLO regressions, offchannel handling, list corruption
- mac80211: scan allocation size, no 40 MHz EHT, signed type
- rt2x00: (randconfig) build
- cfg80211: use-after-free
- iwlwifi: config/old devices, BIOS compatibility
- mwifiex: vmalloc content leak
* tag 'wireless-2025-08-28' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (29 commits)
wifi: iwlwifi: cfg: add back more lost PCI IDs
wifi: iwlwifi: fix byte count table for old devices
wifi: iwlwifi: cfg: restore some 1000 series configs
wifi: mwifiex: Initialize the chan_stats array to zero
wifi: mac80211: do not permit 40 MHz EHT operation on 5/6 GHz
wifi: iwlwifi: uefi: check DSM item validity
wifi: iwlwifi: acpi: check DSM func validity
wifi: iwlwifi: if scratch is ~0U, consider it a failure
wifi: mt76: fix linked list corruption
wifi: mt76: free pending offchannel tx frames on wcid cleanup
wifi: mt76: mt7915: fix list corruption after hardware restart
wifi: mt76: mt7996: add missing check for rx wcid entries
wifi: mt76: do not add non-sta wcid entries to the poll list
wifi: mt76: mt7996: fix crash on some tx status reports
wifi: mt76: mt7996: use the correct vif link for scanning/roc
wifi: mt76: mt7996: disable beacons when going offchannel
wifi: mt76: prevent non-offchannel mgmt tx during scan/roc
wifi: mt76: mt7925: skip EHT MLD TLV on non-MLD and pass conn_state for sta_cmd
wifi: mt76: mt7925u: use connac3 tx aggr check in tx complete
wifi: mt76: mt7925: fix the wrong bss cleanup for SAP
...
====================
Link: https://patch.msgid.link/20250828122654.1167754-8-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported the splat below without a repro.
In the splat, a single thread calling bt_accept_dequeue() freed sk
and touched it after that.
The root cause would be the racy l2cap_sock_cleanup_listen() call
added by the cited commit.
bt_accept_dequeue() is called under lock_sock() except for
l2cap_sock_release().
Two threads could see the same socket during the list iteration
in bt_accept_dequeue():
CPU1 CPU2 (close())
---- ----
sock_hold(sk) sock_hold(sk);
lock_sock(sk) <-- block close()
sock_put(sk)
bt_accept_unlink(sk)
sock_put(sk) <-- refcnt by bt_accept_enqueue()
release_sock(sk)
lock_sock(sk)
sock_put(sk)
bt_accept_unlink(sk)
sock_put(sk) <-- last refcnt
bt_accept_unlink(sk) <-- UAF
Depending on the timing, the other thread could show up in the
"Freed by task" part.
Let's call l2cap_sock_cleanup_listen() under lock_sock() in
l2cap_sock_release().
[0]:
BUG: KASAN: slab-use-after-free in debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline]
BUG: KASAN: slab-use-after-free in do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115
Read of size 4 at addr ffff88803b7eb1c4 by task syz.5.3276/16995
CPU: 3 UID: 0 PID: 16995 Comm: syz.5.3276 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcd/0x630 mm/kasan/report.c:482
kasan_report+0xe0/0x110 mm/kasan/report.c:595
debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline]
do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115
spin_lock_bh include/linux/spinlock.h:356 [inline]
release_sock+0x21/0x220 net/core/sock.c:3746
bt_accept_dequeue+0x505/0x600 net/bluetooth/af_bluetooth.c:312
l2cap_sock_cleanup_listen+0x5c/0x2a0 net/bluetooth/l2cap_sock.c:1451
l2cap_sock_release+0x5c/0x210 net/bluetooth/l2cap_sock.c:1425
__sock_release+0xb3/0x270 net/socket.c:649
sock_close+0x1c/0x30 net/socket.c:1439
__fput+0x3ff/0xb70 fs/file_table.c:468
task_work_run+0x14d/0x240 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43
exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline]
do_syscall_64+0x3f6/0x4c0 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f2accf8ebe9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffdb6cb1378 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4
RAX: 0000000000000000 RBX: 00000000000426fb RCX: 00007f2accf8ebe9
RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003
RBP: 00007f2acd1b7da0 R08: 0000000000000001 R09: 00000012b6cb166f
R10: 0000001b30e20000 R11: 0000000000000246 R12: 00007f2acd1b609c
R13: 00007f2acd1b6090 R14: ffffffffffffffff R15: 00007ffdb6cb1490
</TASK>
Allocated by task 5326:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:388 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:405
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4365 [inline]
__kmalloc_noprof+0x223/0x510 mm/slub.c:4377
kmalloc_noprof include/linux/slab.h:909 [inline]
sk_prot_alloc+0x1a8/0x2a0 net/core/sock.c:2239
sk_alloc+0x36/0xc20 net/core/sock.c:2295
bt_sock_alloc+0x3b/0x3a0 net/bluetooth/af_bluetooth.c:151
l2cap_sock_alloc.constprop.0+0x33/0x1d0 net/bluetooth/l2cap_sock.c:1894
l2cap_sock_new_connection_cb+0x101/0x240 net/bluetooth/l2cap_sock.c:1482
l2cap_connect_cfm+0x4c4/0xf80 net/bluetooth/l2cap_core.c:7287
hci_connect_cfm include/net/bluetooth/hci_core.h:2050 [inline]
hci_remote_features_evt+0x4dd/0x970 net/bluetooth/hci_event.c:3712
hci_event_func net/bluetooth/hci_event.c:7519 [inline]
hci_event_packet+0xa0d/0x11c0 net/bluetooth/hci_event.c:7573
hci_rx_work+0x2c5/0x16b0 net/bluetooth/hci_core.c:4071
process_one_work+0x9cf/0x1b70 kernel/workqueue.c:3236
process_scheduled_works kernel/workqueue.c:3319 [inline]
worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400
kthread+0x3c2/0x780 kernel/kthread.c:463
ret_from_fork+0x5d7/0x6f0 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
Freed by task 16995:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:243 [inline]
__kasan_slab_free+0x60/0x70 mm/kasan/common.c:275
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2417 [inline]
slab_free mm/slub.c:4680 [inline]
kfree+0x2b4/0x4d0 mm/slub.c:4879
sk_prot_free net/core/sock.c:2278 [inline]
__sk_destruct+0x75f/0x9a0 net/core/sock.c:2373
sk_destruct+0xc2/0xf0 net/core/sock.c:2401
__sk_free+0xf4/0x3e0 net/core/sock.c:2412
sk_free+0x6a/0x90 net/core/sock.c:2423
sock_put include/net/sock.h:1960 [inline]
bt_accept_unlink+0x245/0x2e0 net/bluetooth/af_bluetooth.c:262
bt_accept_dequeue+0x517/0x600 net/bluetooth/af_bluetooth.c:308
l2cap_sock_cleanup_listen+0x5c/0x2a0 net/bluetooth/l2cap_sock.c:1451
l2cap_sock_release+0x5c/0x210 net/bluetooth/l2cap_sock.c:1425
__sock_release+0xb3/0x270 net/socket.c:649
sock_close+0x1c/0x30 net/socket.c:1439
__fput+0x3ff/0xb70 fs/file_table.c:468
task_work_run+0x14d/0x240 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43
exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline]
do_syscall_64+0x3f6/0x4c0 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 1728137b33c0 ("Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_ready_cb")
Reported-by: syzbot+e5e64cdf8e92046dd3e1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/68af6b9d.a70a0220.3cafd4.0032.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The EHT PHY requirements state that 80 MHz must be supported on the 5
and 6 GHz bands unless the STA is 20 MHz only. So if the channel width
is limited to 40 MHz on a band other than 2.4 GHz, then disable EHT and
downgrade to HE.
The primary case where this can happen is if the hardware disables
puncturing using IEEE80211_HW_DISALLOW_PUNCTURING.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250826202553.a6582f3abf57.Ic670429dc7127f68c818b4290d950ebfb5a0b9e1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit 9e30ecf23b1b ("net: ipv4: fix incorrect MTU in broadcast routes")
introduced a regression where local-broadcast packets would have their
gateway set in __mkroute_output, which was caused by fi = NULL being
removed.
Fix this by resetting the fib_info for local-broadcast packets. This
preserves the intended changes for directed-broadcast packets.
Cc: stable@vger.kernel.org
Fixes: 9e30ecf23b1b ("net: ipv4: fix incorrect MTU in broadcast routes")
Reported-by: Brett A C Sheffield <bacs@librecast.net>
Closes: https://lore.kernel.org/regressions/20250822165231.4353-4-bacs@librecast.net
Signed-off-by: Oscar Maes <oscmaes92@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250827062322.4807-1-oscmaes92@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzbot crashed in rose_clear_routes(), after a recent patch typo.
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 0 UID: 0 PID: 10591 Comm: syz.3.1856 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:rose_clear_routes net/rose/rose_route.c:565 [inline]
RIP: 0010:rose_rt_ioctl+0x162/0x1250 net/rose/rose_route.c:760
<TASK>
rose_ioctl+0x3ce/0x8b0 net/rose/af_rose.c:1381
sock_do_ioctl+0xd9/0x300 net/socket.c:1238
sock_ioctl+0x576/0x790 net/socket.c:1359
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:598 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:584
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: da9c9c877597 ("net: rose: include node references in rose_neigh refcount")
Reported-by: syzbot+2eb8d1719f7cfcfa6840@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68af3e29.a70a0220.3cafd4.002e.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Takamitsu Iwai <takamitz@amazon.co.jp>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250827172149.5359-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pppol2tp_session_get_sock() is using RCU, it must be ready
for sk_refcnt being zero.
Commit ee40fb2e1eb5 ("l2tp: protect sock pointer of
struct pppol2tp_session with RCU") was correct because it
had a call_rcu(..., pppol2tp_put_sk) which was later removed in blamed commit.
pppol2tp_recv() can use pppol2tp_session_get_sock() as well.
Fixes: c5cbaef992d6 ("l2tp: refactor ppp socket/session relationship")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20250826134435.1683435-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot found that sin6_scope_id was not properly initialized,
leading to undefined behavior.
Clear sin6_scope_id and sin6_flowinfo.
BUG: KMSAN: uninit-value in __sctp_v6_cmp_addr+0x887/0x8c0 net/sctp/ipv6.c:649
__sctp_v6_cmp_addr+0x887/0x8c0 net/sctp/ipv6.c:649
sctp_inet6_cmp_addr+0x4f2/0x510 net/sctp/ipv6.c:983
sctp_bind_addr_conflict+0x22a/0x3b0 net/sctp/bind_addr.c:390
sctp_get_port_local+0x21eb/0x2440 net/sctp/socket.c:8452
sctp_get_port net/sctp/socket.c:8523 [inline]
sctp_listen_start net/sctp/socket.c:8567 [inline]
sctp_inet_listen+0x710/0xfd0 net/sctp/socket.c:8636
__sys_listen_socket net/socket.c:1912 [inline]
__sys_listen net/socket.c:1927 [inline]
__do_sys_listen net/socket.c:1932 [inline]
__se_sys_listen net/socket.c:1930 [inline]
__x64_sys_listen+0x343/0x4c0 net/socket.c:1930
x64_sys_call+0x271d/0x3e20 arch/x86/include/generated/asm/syscalls_64.h:51
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Local variable addr.i.i created at:
sctp_get_port net/sctp/socket.c:8515 [inline]
sctp_listen_start net/sctp/socket.c:8567 [inline]
sctp_inet_listen+0x650/0xfd0 net/sctp/socket.c:8636
__sys_listen_socket net/socket.c:1912 [inline]
__sys_listen net/socket.c:1927 [inline]
__do_sys_listen net/socket.c:1932 [inline]
__se_sys_listen net/socket.c:1930 [inline]
__x64_sys_listen+0x343/0x4c0 net/socket.c:1930
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+e69f06a0f30116c68056@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68adc0a2.050a0220.37038e.00c4.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250826141314.1802610-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current implementation maintains two separate reference counting
mechanisms: the 'count' field in struct rose_neigh tracks references from
rose_node structures, while the 'use' field (now refcount_t) tracks
references from rose_sock.
This patch merges these two reference counting systems using 'use' field
for proper reference management. Specifically, this patch adds incrementing
and decrementing of rose_neigh->use when rose_neigh->count is incremented
or decremented.
This patch also modifies rose_rt_free(), rose_rt_device_down() and
rose_clear_route() to properly release references to rose_neigh objects
before freeing a rose_node through rose_remove_node().
These changes ensure rose_neigh structures are properly freed only when
all references, including those from rose_node structures, are released.
As a result, this resolves a slab-use-after-free issue reported by Syzbot.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+942297eecf7d2d61d1f1@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=942297eecf7d2d61d1f1
Signed-off-by: Takamitsu Iwai <takamitz@amazon.co.jp>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250823085857.47674-4-takamitz@amazon.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 'use' field in struct rose_neigh is used as a reference counter but
lacks atomicity. This can lead to race conditions where a rose_neigh
structure is freed while still being referenced by other code paths.
For example, when rose_neigh->use becomes zero during an ioctl operation
via rose_rt_ioctl(), the structure may be removed while its timer is
still active, potentially causing use-after-free issues.
This patch changes the type of 'use' from unsigned short to refcount_t and
updates all code paths to use rose_neigh_hold() and rose_neigh_put() which
operate reference counts atomically.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Takamitsu Iwai <takamitz@amazon.co.jp>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250823085857.47674-3-takamitz@amazon.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current rose_remove_neigh() performs two distinct operations:
1. Removes rose_neigh from rose_neigh_list
2. Frees the rose_neigh structure
Split these operations into separate functions to improve maintainability
and prepare for upcoming refcount_t conversion. The timer cleanup remains
in rose_remove_neigh() because free operations can be called from timer
itself.
This patch introduce rose_neigh_put() to handle the freeing of rose_neigh
structures and modify rose_remove_neigh() to handle removal only.
Signed-off-by: Takamitsu Iwai <takamitz@amazon.co.jp>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250823085857.47674-2-takamitz@amazon.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The helper registration return value is passed-through by module_init
callbacks which modprobe confuses with the harmless -EEXIST returned
when trying to load an already loaded module.
Make sure modprobe fails so users notice their helper has not been
registered and won't work.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Fixes: 12f7a505331e ("netfilter: add user-space connection tracking helper infrastructure")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
after confirm
When send a broadcast packet to a tap device, which was added to a bridge,
br_nf_local_in() is called to confirm the conntrack. If another conntrack
with the same hash value is added to the hash table, which can be
triggered by a normal packet to a non-bridge device, the below warning
may happen.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 96 at net/bridge/br_netfilter_hooks.c:632 br_nf_local_in+0x168/0x200
CPU: 1 UID: 0 PID: 96 Comm: tap_send Not tainted 6.17.0-rc2-dirty #44 PREEMPT(voluntary)
RIP: 0010:br_nf_local_in+0x168/0x200
Call Trace:
<TASK>
nf_hook_slow+0x3e/0xf0
br_pass_frame_up+0x103/0x180
br_handle_frame_finish+0x2de/0x5b0
br_nf_hook_thresh+0xc0/0x120
br_nf_pre_routing_finish+0x168/0x3a0
br_nf_pre_routing+0x237/0x5e0
br_handle_frame+0x1ec/0x3c0
__netif_receive_skb_core+0x225/0x1210
__netif_receive_skb_one_core+0x37/0xa0
netif_receive_skb+0x36/0x160
tun_get_user+0xa54/0x10c0
tun_chr_write_iter+0x65/0xb0
vfs_write+0x305/0x410
ksys_write+0x60/0xd0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
---[ end trace 0000000000000000 ]---
To solve the hash conflict, nf_ct_resolve_clash() try to merge the
conntracks, and update skb->_nfct. However, br_nf_local_in() still use the
old ct from local variable 'nfct' after confirm(), which leads to this
warning.
If confirm() does not insert the conntrack entry and return NF_DROP, the
warning may also occur. There is no need to reserve the WARN_ON_ONCE, just
remove it.
Link: https://lore.kernel.org/netdev/20250820043329.2902014-1-wangliang74@huawei.com/
Fixes: 62e7151ae3eb ("netfilter: bridge: confirm multicast packets before passing them up the stack")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Currently the S1G capability element is not taken into account
for the scan_ies_len, which leads to a buffer length validation
failure in ieee80211_prep_hw_scan() and subsequent WARN in
__ieee80211_start_scan(). This prevents hw scanning from functioning.
To fix ensure we accommodate for the S1G capability length.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250826085437.3493-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The variable ret is declared as a u32 type, but it is assigned a value
of -EOPNOTSUPP. Since unsigned types cannot correctly represent negative
values, the type of ret should be changed to int.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://patch.msgid.link/20250825022911.139377-1-liaoyuanhong@vivo.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Following bss_free() quirk introduced in commit 776b3580178f
("cfg80211: track hidden SSID networks properly"), adjust
cfg80211_update_known_bss() to free the last beacon frame
elements only if they're not shared via the corresponding
'hidden_beacon_bss' pointer.
Reported-by: syzbot+30754ca335e6fb7e3092@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=30754ca335e6fb7e3092
Fixes: 3ab8227d3e7d ("cfg80211: refactor cfg80211_bss_update")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20250813135236.799384-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
syzbot reported the splat below. [0]
When atmtcp_v_open() or atmtcp_v_close() is called via connect()
or close(), atmtcp_send_control() is called to send an in-kernel
special message.
The message has ATMTCP_HDR_MAGIC in atmtcp_control.hdr.length.
Also, a pointer of struct atm_vcc is set to atmtcp_control.vcc.
The notable thing is struct atmtcp_control is uAPI but has a
space for an in-kernel pointer.
struct atmtcp_control {
struct atmtcp_hdr hdr; /* must be first */
...
atm_kptr_t vcc; /* both directions */
...
} __ATM_API_ALIGN;
typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t;
The special message is processed in atmtcp_recv_control() called
from atmtcp_c_send().
atmtcp_c_send() is vcc->dev->ops->send() and called from 2 paths:
1. .ndo_start_xmit() (vcc->send() == atm_send_aal0())
2. vcc_sendmsg()
The problem is sendmsg() does not validate the message length and
userspace can abuse atmtcp_recv_control() to overwrite any kptr
by atmtcp_control.
Let's add a new ->pre_send() hook to validate messages from sendmsg().
[0]:
Oops: general protection fault, probably for non-canonical address 0xdffffc00200000ab: 0000 [#1] SMP KASAN PTI
KASAN: probably user-memory-access in range [0x0000000100000558-0x000000010000055f]
CPU: 0 UID: 0 PID: 5865 Comm: syz-executor331 Not tainted 6.17.0-rc1-syzkaller-00215-gbab3ce404553 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:atmtcp_recv_control drivers/atm/atmtcp.c:93 [inline]
RIP: 0010:atmtcp_c_send+0x1da/0x950 drivers/atm/atmtcp.c:297
Code: 4d 8d 75 1a 4c 89 f0 48 c1 e8 03 42 0f b6 04 20 84 c0 0f 85 15 06 00 00 41 0f b7 1e 4d 8d b7 60 05 00 00 4c 89 f0 48 c1 e8 03 <42> 0f b6 04 20 84 c0 0f 85 13 06 00 00 66 41 89 1e 4d 8d 75 1c 4c
RSP: 0018:ffffc90003f5f810 EFLAGS: 00010203
RAX: 00000000200000ab RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88802a510000 RSI: 00000000ffffffff RDI: ffff888030a6068c
RBP: ffff88802699fb40 R08: ffff888030a606eb R09: 1ffff1100614c0dd
R10: dffffc0000000000 R11: ffffffff8718fc40 R12: dffffc0000000000
R13: ffff888030a60680 R14: 000000010000055f R15: 00000000ffffffff
FS: 00007f8d7e9236c0(0000) GS:ffff888125c1c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000045ad50 CR3: 0000000075bde000 CR4: 00000000003526f0
Call Trace:
<TASK>
vcc_sendmsg+0xa10/0xc60 net/atm/common.c:645
sock_sendmsg_nosec net/socket.c:714 [inline]
__sock_sendmsg+0x219/0x270 net/socket.c:729
____sys_sendmsg+0x505/0x830 net/socket.c:2614
___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668
__sys_sendmsg net/socket.c:2700 [inline]
__do_sys_sendmsg net/socket.c:2705 [inline]
__se_sys_sendmsg net/socket.c:2703 [inline]
__x64_sys_sendmsg+0x19b/0x260 net/socket.c:2703
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f8d7e96a4a9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f8d7e923198 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f8d7e9f4308 RCX: 00007f8d7e96a4a9
RDX: 0000000000000000 RSI: 0000200000000240 RDI: 0000000000000005
RBP: 00007f8d7e9f4300 R08: 65732f636f72702f R09: 65732f636f72702f
R10: 65732f636f72702f R11: 0000000000000246 R12: 00007f8d7e9c10ac
R13: 00007f8d7e9231a0 R14: 0000200000000200 R15: 0000200000000250
</TASK>
Modules linked in:
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+1741b56d54536f4ec349@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68a6767c.050a0220.3d78fd.0011.GAE@google.com/
Tested-by: syzbot+1741b56d54536f4ec349@syzkaller.appspotmail.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250821021901.2814721-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
* tag 'for-net-2025-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sync: fix set_local_name race condition
Bluetooth: hci_event: Disconnect device when BIG sync is lost
Bluetooth: hci_event: Detect if HCI_EV_NUM_COMP_PKTS is unbalanced
Bluetooth: hci_event: Mark connection as closed during suspend disconnect
Bluetooth: hci_event: Treat UNKNOWN_CONN_ID on disconnect as success
Bluetooth: hci_conn: Make unacked packet handling more robust
====================
Link: https://patch.msgid.link/20250822180230.345979-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Minor fix to the memory provider error handling, we should be jumping to
free_ptr_ring in this error case rather than returning directly.
Found by code-inspection.
Cc: skhawaja@google.com
Fixes: b400f4b87430 ("page_pool: Set `dma_sync` to false for devmem memory provider")
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250821030349.705244-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Function set_name_sync() uses hdev->dev_name field to send
HCI_OP_WRITE_LOCAL_NAME command, but copying from data to hdev->dev_name
is called after mgmt cmd was queued, so it is possible that function
set_name_sync() will read old name value.
This change adds name as a parameter for function hci_update_name_sync()
to avoid race condition.
Fixes: 6f6ff38a1e14 ("Bluetooth: hci_sync: Convert MGMT_OP_SET_LOCAL_NAME")
Signed-off-by: Pavel Shpakovskiy <pashpakovskii@salutedevices.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When a BIG sync is lost, the device should be set to "disconnected".
This ensures symmetry with the ISO path setup, where the device is
marked as "connected" once the path is established. Without this
change, the device state remains inconsistent and may lead to a
memory leak.
Fixes: b2a5f2e1c127 ("Bluetooth: hci_event: Add support for handling LE BIG Sync Lost event")
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This attempts to detect if HCI_EV_NUM_COMP_PKTS contain an unbalanced
(more than currently considered outstanding) number of packets otherwise
it could cause the hcon->sent to underflow and loop around breaking the
tracking of the outstanding packets pending acknowledgment.
Fixes: f42809185896 ("Bluetooth: Simplify num_comp_pkts_evt function")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When suspending, the disconnect command for an active Bluetooth
connection could be issued, but the corresponding
`HCI_EV_DISCONN_COMPLETE` event might not be received before the system
completes the suspend process. This can lead to an inconsistent state.
On resume, the controller may auto-accept reconnections from the same
device (due to suspend event filters), but these new connections are
rejected by the kernel which still has connection objects from before
suspend. Resulting in errors like:
```
kernel: Bluetooth: hci0: ACL packet for unknown connection handle 1
kernel: Bluetooth: hci0: Ignoring HCI_Connection_Complete for existing
connection
```
This is a btmon snippet that shows the issue:
```
< HCI Command: Disconnect (0x01|0x0006) plen 3
Handle: 1 Address: 78:20:A5:4A:DF:28 (Nintendo Co.,Ltd)
Reason: Remote User Terminated Connection (0x13)
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) ncmd 2
Status: Success (0x00)
[...]
// Host suspends with the event filter set for the device
// On resume, the device tries to reconnect with a new handle
> HCI Event: Connect Complete (0x03) plen 11
Status: Success (0x00)
Handle: 2
Address: 78:20:A5:4A:DF:28 (Nintendo Co.,Ltd)
// Kernel ignores this event because there is an existing connection
with
// handle 1
```
By explicitly setting the connection state to BT_CLOSED we can ensure a
consistent state, even if we don't receive the disconnect complete event
in time.
Link: https://github.com/bluez/bluez/issues/1226
Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Ludovico de Nittis <ludovico.denittis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When the host sends an HCI_OP_DISCONNECT command, the controller may
respond with the status HCI_ERROR_UNKNOWN_CONN_ID (0x02). E.g. this can
happen on resume from suspend, if the link was terminated by the remote
device before the event mask was correctly set.
This is a btmon snippet that shows the issue:
```
> ACL Data RX: Handle 3 flags 0x02 dlen 12
L2CAP: Disconnection Request (0x06) ident 5 len 4
Destination CID: 65
Source CID: 72
< ACL Data TX: Handle 3 flags 0x00 dlen 12
L2CAP: Disconnection Response (0x07) ident 5 len 4
Destination CID: 65
Source CID: 72
> ACL Data RX: Handle 3 flags 0x02 dlen 12
L2CAP: Disconnection Request (0x06) ident 6 len 4
Destination CID: 64
Source CID: 71
< ACL Data TX: Handle 3 flags 0x00 dlen 12
L2CAP: Disconnection Response (0x07) ident 6 len 4
Destination CID: 64
Source CID: 71
< HCI Command: Set Event Mask (0x03|0x0001) plen 8
Mask: 0x3dbff807fffbffff
Inquiry Complete
Inquiry Result
Connection Complete
Connection Request
Disconnection Complete
Authentication Complete
[...]
< HCI Command: Disconnect (0x01|0x0006) plen 3
Handle: 3 Address: 78:20:A5:4A:DF:28 (Nintendo Co.,Ltd)
Reason: Remote User Terminated Connection (0x13)
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) ncmd 1
Status: Unknown Connection Identifier (0x02)
```
Currently, the hci_cs_disconnect function treats any non-zero status
as a command failure. This can be misleading because the connection is
indeed being terminated and the controller is confirming that is has no
knowledge of that connection handle. Meaning that the initial request of
disconnecting a device should be treated as done.
With this change we allow the function to proceed, following the success
path, which correctly calls `mgmt_device_disconnected` and ensures a
consistent state.
Link: https://github.com/bluez/bluez/issues/1226
Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Ludovico de Nittis <ludovico.denittis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
