| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit e9837e55b0200da544a095a1fca36efd7fd3ba30.
When talking to Maze and Chenbo, we agreed to keep this back by now
due to problems in the ruleset listing path with 32-bit arches.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nft_dup_netdev_ingress_ops and nft_fwd_netdev_ingress_ops variables are
no longer used at the code.
Signed-off-by: Weongyo Jeong <weongyo.linux@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nf_flow_table_cleanup()
parameter net of nf_flow_table_cleanup() is not used.
So that it can be removed.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In order to upload helper module automatically, helper alias name
is needed. so that MODULE_ALIAS_NFCT_HELPER() should be added.
And unlike other nat helper modules, the nf_nat_snmp_basic can be
used independently.
helper name is "snmp_trap" so that alias name will be
"nfct-helper-snmp_trap" by MODULE_ALIAS_NFCT_HELPER(snmp_trap)
test command:
%iptables -t raw -I PREROUTING -p udp -j CT --helper snmp_trap
%lsmod | grep nf_nat_snmp_basic
We can see nf_nat_snmp_basic module is uploaded automatically.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
info area in match is always available, and remove unneeded variables.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Eyal says:
doesn't the use of nft_pf(pkt) in this context limit the matching of
encapsulated packets to the same family?
IIUC when an e.g. IPv6-in-IPv4 packet is matched, the nft_pf(pkt) will
be the decapsulated packet family - IPv6 - whereas the state may be
IPv4. So this check would not allow matching the 'underlay' address in
such cases.
I know this was a limitation in xt_policy. but is this intentional in
this matcher? or is it possible to use state->props.family when
validating the match instead of nft_pf(pkt)?
Userspace already tells us which address family it expects to match, so
we can just use the real state family rather than the hook family.
so change it as suggested above.
Reported-by: Eyal Birger <eyal.birger@gmail.com>
Suggested-by: Eyal Birger <eyal.birger@gmail.com>
Fixes: 6c47260250fc6 ("netfilter: nf_tables: add xfrm expression")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add ttl option support to the nftables "osf" expression.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
net/netfilter/nfnetlink_cttimeout.c: In function 'cttimeout_default_set':
net/netfilter/nfnetlink_cttimeout.c:353:8: warning:
variable 'l3num' set but not used [-Wunused-but-set-variable]
It not used any more after
commit dd2934a95701 ("netfilter: conntrack: remove l3->l4 mapping information")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
lockdep_assert_held() is better suited to checking locking requirements,
since it won't get confused when someone else holds the lock. This is
also a step towards possibly removing spin_is_locked().
Signed-off-by: Lance Roy <ldr709@gmail.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Cc: Florian Westphal <fw@strlen.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: <netfilter-devel@vger.kernel.org>
Cc: <coreteam@netfilter.org>
Cc: <netdev@vger.kernel.org>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-10-08
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) sk_lookup_[tcp|udp] and sk_release helpers from Joe Stringer which allow
BPF programs to perform lookups for sockets in a network namespace. This would
allow programs to determine early on in processing whether the stack is
expecting to receive the packet, and perform some action (eg drop,
forward somewhere) based on this information.
2) per-cpu cgroup local storage from Roman Gushchin.
Per-cpu cgroup local storage is very similar to simple cgroup storage
except all the data is per-cpu. The main goal of per-cpu variant is to
implement super fast counters (e.g. packet counters), which don't require
neither lookups, neither atomic operations in a fast path.
The example of these hybrid counters is in selftests/bpf/netcnt_prog.c
3) allow HW offload of programs with BPF-to-BPF function calls from Quentin Monnet
4) support more than 64-byte key/value in HW offloaded BPF maps from Jakub Kicinski
5) rename of libbpf interfaces from Andrey Ignatov.
libbpf is maturing as a library and should follow good practices in
library design and implementation to play well with other libraries.
This patch set brings consistent naming convention to global symbols.
6) relicense libbpf as LGPL-2.1 OR BSD-2-Clause from Alexei Starovoitov
to let Apache2 projects use libbpf
7) various AF_XDP fixes from Björn and Magnus
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for your net-next tree:
1) Support for matching on ipsec policy already set in the route, from
Florian Westphal.
2) Split set destruction into deactivate and destroy phase to make it
fit better into the transaction infrastructure, also from Florian.
This includes a patch to warn on imbalance when setting the new
activate and deactivate interfaces.
3) Release transaction list from the workqueue to remove expensive
synchronize_rcu() from configuration plane path. This speeds up
configuration plane quite a bit. From Florian Westphal.
4) Add new xfrm/ipsec extension, this new extension allows you to match
for ipsec tunnel keys such as source and destination address, spi and
reqid. From Máté Eckl and Florian Westphal.
5) Add secmark support, this includes connsecmark too, patches
from Christian Gottsche.
6) Allow to specify remaining bytes in xt_quota, from Chenbo Feng.
One follow up patch to calm a clang warning for this one, from
Nathan Chancellor.
7) Flush conntrack entries based on layer 3 family, from Kristian Evensen.
8) New revision for cgroups2 to shrink the path field.
9) Get rid of obsolete need_conntrack(), as a result from recent
demodularization works.
10) Use WARN_ON instead of BUG_ON, from Florian Westphal.
11) Unused exported symbol in nf_nat_ipv4_fn(), from Florian.
12) Remove superfluous check for timeout netlink parser and dump
functions in layer 4 conntrack helpers.
13) Unnecessary redundant rcu read side locks in NAT redirect,
from Taehee Yoo.
14) Pass nf_hook_state structure to error handlers, patch from
Florian Westphal.
15) Remove ->new() interface from layer 4 protocol trackers. Place
them in the ->packet() interface. From Florian.
16) Place conntrack ->error() handling in the ->packet() interface.
Patches from Florian Westphal.
17) Remove unused parameter in the pernet initialization path,
also from Florian.
18) Remove additional parameter to specify layer 3 protocol when
looking up for protocol tracker. From Florian.
19) Shrink array of layer 4 protocol trackers, from Florian.
20) Check for linear skb only once from the ALG NAT mangling
codebase, from Taehee Yoo.
21) Use rhashtable_walk_enter() instead of deprecated
rhashtable_walk_init(), also from Taehee.
22) No need to flush all conntracks when only one single address
is gone, from Tan Hu.
23) Remove redundant check for NAT flags in flowtable code, from
Taehee Yoo.
24) Use rhashtable_lookup() instead of rhashtable_lookup_fast()
from netfilter codebase, since rcu read lock side is already
assumed in this path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The newly added TCP and UDP handling fails to link when CONFIG_INET
is disabled:
net/core/filter.o: In function `sk_lookup':
filter.c:(.text+0x7ff8): undefined reference to `tcp_hashinfo'
filter.c:(.text+0x7ffc): undefined reference to `tcp_hashinfo'
filter.c:(.text+0x8020): undefined reference to `__inet_lookup_established'
filter.c:(.text+0x8058): undefined reference to `__inet_lookup_listener'
filter.c:(.text+0x8068): undefined reference to `udp_table'
filter.c:(.text+0x8070): undefined reference to `udp_table'
filter.c:(.text+0x808c): undefined reference to `__udp4_lib_lookup'
net/core/filter.o: In function `bpf_sk_release':
filter.c:(.text+0x82e8): undefined reference to `sock_gen_put'
Wrap the related sections of code in #ifdefs for the config option.
Furthermore, sk_lookup() should always have been marked 'static', this
also avoids a warning about a missing prototype when building with
'make W=1'.
Fixes: 6acc9b432e67 ("bpf: Add helper to retrieve socket in BPF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Clang warns:
net/netfilter/xt_quota.c:47:44: warning: 'aligned' attribute ignored
when parsing type [-Wignored-attributes]
BUILD_BUG_ON(sizeof(atomic64_t) != sizeof(__aligned_u64));
^~~~~~~~~~~~~
Use 'sizeof(__u64)' instead, as the alignment doesn't affect the size
of the type.
Fixes: e9837e55b020 ("netfilter: xt_quota: fix the behavior of xt_quota module")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Update rtnl_fdb_dump for strict data checking. If the flag is set,
the dump request is expected to have an ndmsg struct as the header
potentially followed by one or more attributes. Any data passed in the
header or as an attribute is taken as a request to influence the data
returned. Only values supported by the dump handler are allowed to be
non-0 or set in the request. At the moment only the NDA_IFINDEX and
NDA_MASTER attributes are supported.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the existing input checking for rtnl_fdb_dump into a helper,
valid_fdb_dump_legacy. This function will retain the current
logic that works around the 2 headers that userspace has been
allowed to send up to this point.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update br_mdb_dump for strict data checking. If the flag is set,
the dump request is expected to have a br_port_msg struct as the
header. All elements of the struct are expected to be 0 and no
attributes can be appended.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update inet_netconf_dump_devconf, inet6_netconf_dump_devconf, and
mpls_netconf_dump_devconf for strict data checking. If the flag is set,
the dump request is expected to have an netconfmsg struct as the header.
The struct only has the family member and no attributes can be appended.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update ip6addrlbl_dump for strict data checking. If the flag is set,
the dump request is expected to have an ifaddrlblmsg struct as the
header. All elements of the struct are expected to be 0 and no
attributes can be appended.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update fib_nl_dumprule for strict data checking. If the flag is set,
the dump request is expected to have fib_rule_hdr struct as the header.
All elements of the struct are expected to be 0 and no attributes can
be appended.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update rtnl_net_dumpid for strict data checking. If the flag is set,
the dump request is expected to have an rtgenmsg struct as the header
which has the family as the only element. No data may be appended.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update neightbl_dump_info for strict data checking. If the flag is set,
the dump request is expected to have an ndtmsg struct as the header.
All elements of the struct are expected to be 0 and no attributes can
be appended.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update neigh_dump_info for strict data checking. If the flag is set,
the dump request is expected to have an ndmsg struct as the header
potentially followed by one or more attributes. Any data passed in the
header or as an attribute is taken as a request to influence the data
returned. Only values supported by the dump handler are allowed to be
non-0 or set in the request. At the moment only the NDA_IFINDEX and
NDA_MASTER attributes are supported.
Existing code does not fail the dump if nlmsg_parse fails. That behavior
is kept for non-strict checking.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add helper to check netlink message for route dumps. If the strict flag
is set the dump request is expected to have an rtmsg struct as the header.
All elements of the struct are expected to be 0 with the exception of
rtm_flags (which is used by both ipv4 and ipv6 dumps) and no attributes
can be appended. rtm_flags can only have RTM_F_CLONED and RTM_F_PREFIX
set.
Update inet_dump_fib, inet6_dump_fib, mpls_dump_routes, ipmr_rtm_dumproute,
and ip6mr_rtm_dumproute to call this helper if strict data checking is
enabled.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update ipmr_rtm_dumplink for strict data checking. If the flag is set,
the dump request is expected to have an ifinfomsg struct as the header.
All elements of the struct are expected to be 0 and no attributes can
be appended.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update inet6_dump_ifinfo for strict data checking. If the flag is
set, the dump request is expected to have an ifinfomsg struct as
the header. All elements of the struct are expected to be 0 and no
attributes can be appended.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update rtnl_stats_dump for strict data checking. If the flag is set,
the dump request is expected to have an if_stats_msg struct as the header.
All elements of the struct are expected to be 0 except filter_mask which
must be non-0 (legacy behavior). No attributes are supported.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update rtnl_bridge_getlink for strict data checking. If the flag is set,
the dump request is expected to have an ifinfomsg struct as the header
potentially followed by one or more attributes. Any data passed in the
header or as an attribute is taken as a request to influence the data
returned. Only values supported by the dump handler are allowed to be
non-0 or set in the request. At the moment only the IFLA_EXT_MASK
attribute is supported.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update rtnl_dump_ifinfo for strict data checking. If the flag is set,
the dump request is expected to have an ifinfomsg struct as the header
potentially followed by one or more attributes. Any data passed in the
header or as an attribute is taken as a request to influence the data
returned. Only values supported by the dump handler are allowed to be
non-0 or set in the request. At the moment only the IFA_TARGET_NETNSID,
IFLA_EXT_MASK, IFLA_MASTER, and IFLA_LINKINFO attributes are supported.
Existing code does not fail the dump if nlmsg_parse fails. That behavior
is kept for non-strict checking.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update inet6_dump_addr for strict data checking. If the flag is set, the
dump request is expected to have an ifaddrmsg struct as the header
potentially followed by one or more attributes. Any data passed in the
header or as an attribute is taken as a request to influence the data
returned. Only values suppored by the dump handler are allowed to be
non-0 or set in the request. At the moment only the IFA_TARGET_NETNSID
attribute is supported. Follow on patches can add support for other fields
(e.g., honor ifa_index and only return data for the given device index).
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update inet_dump_ifaddr for strict data checking. If the flag is set,
the dump request is expected to have an ifaddrmsg struct as the header
potentially followed by one or more attributes. Any data passed in the
header or as an attribute is taken as a request to influence the data
returned. Only values supported by the dump handler are allowed to be
non-0 or set in the request. At the moment only the IFA_TARGET_NETNSID
attribute is supported. Follow on patches can support for other fields
(e.g., honor ifa_index and only return data for the given device index).
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new socket option, NETLINK_DUMP_STRICT_CHK, that userspace
can use via setsockopt to request strict checking of headers and
attributes on dump requests.
To get dump features such as kernel side filtering based on data in
the header or attributes appended to the dump request, userspace
must call setsockopt() for NETLINK_DUMP_STRICT_CHK and a non-zero
value. Since the netlink sock and its flags are private to the
af_netlink code, the strict checking flag is passed to dump handlers
via a flag in the netlink_callback struct.
For old userspace on new kernel there is no impact as all of the data
checks in later patches are wrapped in a check on the new strict flag.
For new userspace on old kernel, the setsockopt will fail and even if
new userspace sets data in the headers and appended attributes the
kernel will silently ignore it. Moving forward when the setsockopt
succeeds, the new userspace on old kernel means the dump request can
pass an attribute the kernel does not understand. The dump will then
fail as the older kernel does not understand it.
New userspace on new kernel setting the socket option gets the benefit
of the improved data dump.
Kernel side the NETLINK_DUMP_STRICT_CHK uapi is converted to a generic
NETLINK_F_STRICT_CHK flag which can potentially be leveraged for tighter
checking on the NEW, DEL, and SET commands.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull the inet6_fill_args arg up to in6_dump_addrs and move netnsid
into it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make sure extack is passed to nlmsg_parse where easy to do so.
Most of these are dump handlers and leveraging the extack in
the netlink_callback.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Declare extack in netlink_dump and pass to dump handlers via
netlink_callback. Add any extack message after the dump_done_errno
allowing error messages to be returned. This will be useful when
strict checking is done on dump requests, returning why the dump
fails EINVAL.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that we have the knode count, we can instantly check if
any hnodes are non-empty. And that kills the check for extra
references to root hnode - those could happen only if there was
a knode to carry such a link.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
allows to simplify u32_delete() considerably
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Both hnode ->tp_c and tp_c argument of u32_set_parms()
the latter is redundant, the former - never read...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It must be tc_u_common associated with that tp (i.e. tp->data).
Proof:
* both ->ht_up and ->tp_c are assign-once
* ->tp_c of anything inserted into tp_c->hlist is tp_c
* hnodes never get reinserted into the lists or moved
between those, so anything found by u32_lookup_ht(tp->data, ...)
will have ->tp_c equal to tp->data.
* tp->root->tp_c == tp->data.
* ->ht_up of anything inserted into hnode->ht[...] is
equal to hnode.
* knodes never get reinserted into hash chains or moved
between those, so anything returned by u32_lookup_key(ht, ...)
will have ->ht_up equal to ht.
* any knode returned by u32_get(tp, ...) will have ->ht_up->tp_c
point to tp->data
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the only thing we used ht for was ht->tp_c and callers can get that
without going through ->tp_c at all; start with lifting that into
the callers, next commits will massage those, eventually removing
->tp_c altogether.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
* calculate key *once*, not for each hash chain element
* let tc_u_hash() return the pointer to chain head rather than index -
callers are cleaner that way.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
unused
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
not used anymore
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tested by modifying iproute2 to allow sending a divisor > 255
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Operation makes no sense. Nothing will actually break if we do so
(depth limit in u32_classify() will prevent infinite loops), but
according to maintainers it's best prohibited outright.
NOTE: doing so guarantees that u32_destroy() will trigger the call
of u32_destroy_hnode(); we might want to make that unconditional.
Test:
tc qdisc add dev eth0 ingress
tc filter add dev eth0 parent ffff: protocol ip prio 100 u32 \
link 800: offset at 0 mask 0f00 shift 6 plus 0 eat match ip protocol 6 ff
should fail with
Error: cls_u32: Not linking to root node
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
... and produce consistent error on attempt to delete such.
Existing check in u32_delete() is inconsistent - after
tc qdisc add dev eth0 ingress
tc filter add dev eth0 parent ffff: protocol ip prio 100 handle 1: u32 \
divisor 1
tc filter add dev eth0 parent ffff: protocol ip prio 200 handle 2: u32 \
divisor 1
both
tc filter delete dev eth0 parent ffff: protocol ip prio 100 handle 801: u32
and
tc filter delete dev eth0 parent ffff: protocol ip prio 100 handle 800: u32
will fail (at least with refcounting fixes), but the former will complain
about an attempt to remove a busy table, while the latter will recognize
it as root and yield "Not allowed to delete root node" instead.
The problem with the existing check is that several tcf_proto instances
might share the same tp->data and handle-to-hnode lookup will be the same
for all of them. So comparing an hnode to be deleted with tp->root won't
catch the case when one tp is used to try deleting the root of another.
Solution is trivial - mark the root hnodes explicitly upon allocation and
check for that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The AF_XDP socket struct can exist in three different, implicit
states: setup, bound and released. Setup is prior the socket has been
bound to a device. Bound is when the socket is active for receive and
send. Released is when the process/userspace side of the socket is
released, but the sock object is still lingering, e.g. when there is a
reference to the socket in an XSKMAP after process termination.
The Rx fast-path code uses the "dev" member of struct xdp_sock to
check whether a socket is bound or relased, and the Tx code uses the
struct xdp_umem "xsk_list" member in conjunction with "dev" to
determine the state of a socket.
However, the transition from bound to released did not tear the socket
down in correct order.
On the Rx side "dev" was cleared after synchronize_net() making the
synchronization useless. On the Tx side, the internal queues were
destroyed prior removing them from the "xsk_list".
This commit corrects the cleanup order, and by doing so
xdp_del_sk_umem() can be simplified and one synchronize_net() can be
removed.
Fixes: 965a99098443 ("xsk: add support for bind for Rx")
Fixes: ac98d8aab61b ("xsk: wire upp Tx zero-copy functions")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Fix 5 warnings and 14 checks issued by checkpatch.pl:
CHECK: Logical continuations should be on the previous line
+ if ((q->vars.qdelay < q->params.target / 2)
+ && (q->vars.prob < MAX_PROB / 5))
WARNING: line over 80 characters
+ q->params.tupdate = usecs_to_jiffies(nla_get_u32(tb[TCA_PIE_TUPDATE]));
CHECK: Blank lines aren't necessary after an open brace '{'
+{
+
CHECK: braces {} should be used on all arms of this statement
+ if (qlen < QUEUE_THRESHOLD)
[...]
+ else {
[...]
CHECK: Unbalanced braces around else statement
+ else {
CHECK: No space is necessary after a cast
+ if (delta > (s32) (MAX_PROB / (100 / 2)) &&
CHECK: Unnecessary parentheses around 'qdelay == 0'
+ if ((qdelay == 0) && (qdelay_old == 0) && update_prob)
CHECK: Unnecessary parentheses around 'qdelay_old == 0'
+ if ((qdelay == 0) && (qdelay_old == 0) && update_prob)
CHECK: Unnecessary parentheses around 'q->vars.prob == 0'
+ if ((q->vars.qdelay < q->params.target / 2) &&
+ (q->vars.qdelay_old < q->params.target / 2) &&
+ (q->vars.prob == 0) &&
+ (q->vars.avg_dq_rate > 0))
CHECK: Unnecessary parentheses around 'q->vars.avg_dq_rate > 0'
+ if ((q->vars.qdelay < q->params.target / 2) &&
+ (q->vars.qdelay_old < q->params.target / 2) &&
+ (q->vars.prob == 0) &&
+ (q->vars.avg_dq_rate > 0))
CHECK: Blank lines aren't necessary before a close brace '}'
+
+}
CHECK: Comparison to NULL could be written "!opts"
+ if (opts == NULL)
CHECK: No space is necessary after a cast
+ ((u32) PSCHED_TICKS2NS(q->params.target)) /
WARNING: line over 80 characters
+ nla_put_u32(skb, TCA_PIE_TUPDATE, jiffies_to_usecs(q->params.tupdate)) ||
CHECK: Blank lines aren't necessary before a close brace '}'
+
+}
CHECK: No space is necessary after a cast
+ .delay = ((u32) PSCHED_TICKS2NS(q->vars.qdelay)) /
WARNING: Missing a blank line after declarations
+ struct sk_buff *skb;
+ skb = qdisc_dequeue_head(sch);
WARNING: Missing a blank line after declarations
+ struct pie_sched_data *q = qdisc_priv(sch);
+ qdisc_reset_queue(sch);
WARNING: Missing a blank line after declarations
+ struct pie_sched_data *q = qdisc_priv(sch);
+ q->params.tupdate = 0;
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
This patch adds OEM commands and response handling. It also defines OEM
command and response structure as per NCSI specification along with its
handlers.
ncsi_cmd_handler_oem: This is a generic command request handler for OEM
commands
ncsi_rsp_handler_oem: This is a generic response handler for OEM commands
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Reviewed-by: Justin Lee <justin.lee1@dell.com>
Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
