summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2024-11-12wifi: mac80211: Support EHT 1024 aggregation size in TXMeiChia Chiu
Support EHT 1024 aggregation size in TX The 1024 agg size for RX is supported but not for TX. This patch adds this support and refactors common parsing logics for addbaext in both process_addba_resp and process_addba_req into a function. Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Reviewed-by: Money Wang <money.wang@mediatek.com> Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Link: https://patch.msgid.link/20241112083846.32063-1-MeiChia.Chiu@mediatek.com [pass elems/len instead of mgmt/len/is_req] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-12net: rfkill: gpio: Add check for clk_enable()Mingwei Zheng
Add check for the return value of clk_enable() to catch the potential error. Fixes: 7176ba23f8b5 ("net: rfkill: add generic gpio rfkill driver") Signed-off-by: Mingwei Zheng <zmw12306@gmail.com> Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com> Link: https://patch.msgid.link/20241108195341.1853080-1-zmw12306@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-12net: sched: cls_api: improve the error message for ID allocation failureJakub Kicinski
We run into an exhaustion problem with the kernel-allocated filter IDs. Our allocation problem can be fixed on the user space side, but the error message in this case was quite misleading: "Filter with specified priority/protocol not found" (EINVAL) Specifically when we can't allocate a _new_ ID because filter with lowest ID already _exists_, saying "filter not found", is confusing. Kernel allocates IDs in range of 0xc0000 -> 0x8000, giving out ID one lower than lowest existing in that range. The error message makes sense when tcf_chain_tp_find() gets called for GET and DEL but for NEW we need to provide more specific error messages for all three cases: - user wants the ID to be auto-allocated but filter with ID 0x8000 already exists - filter already exists and can be replaced, but user asked for a protocol change - filter doesn't exist Caller of tcf_chain_tp_insert_unique() doesn't set extack today, so don't bother plumbing it in. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20241108010254.2995438-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-12virtio/vsock: Improve MSG_ZEROCOPY error handlingMichal Luczaj
Add a missing kfree_skb() to prevent memory leaks. Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-12vsock: Fix sk_error_queue memory leakMichal Luczaj
Kernel queues MSG_ZEROCOPY completion notifications on the error queue. Where they remain, until explicitly recv()ed. To prevent memory leaks, clean up the queue when the socket is destroyed. unreferenced object 0xffff8881028beb00 (size 224): comm "vsock_test", pid 1218, jiffies 4294694897 hex dump (first 32 bytes): 90 b0 21 17 81 88 ff ff 90 b0 21 17 81 88 ff ff ..!.......!..... 00 00 00 00 00 00 00 00 00 b0 21 17 81 88 ff ff ..........!..... backtrace (crc 6c7031ca): [<ffffffff81418ef7>] kmem_cache_alloc_node_noprof+0x2f7/0x370 [<ffffffff81d35882>] __alloc_skb+0x132/0x180 [<ffffffff81d2d32b>] sock_omalloc+0x4b/0x80 [<ffffffff81d3a8ae>] msg_zerocopy_realloc+0x9e/0x240 [<ffffffff81fe5cb2>] virtio_transport_send_pkt_info+0x412/0x4c0 [<ffffffff81fe6183>] virtio_transport_stream_enqueue+0x43/0x50 [<ffffffff81fe0813>] vsock_connectible_sendmsg+0x373/0x450 [<ffffffff81d233d5>] ____sys_sendmsg+0x365/0x3a0 [<ffffffff81d246f4>] ___sys_sendmsg+0x84/0xd0 [<ffffffff81d26f47>] __sys_sendmsg+0x47/0x80 [<ffffffff820d3df3>] do_syscall_64+0x93/0x180 [<ffffffff8220012b>] entry_SYSCALL_64_after_hwframe+0x76/0x7e Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support") Signed-off-by: Michal Luczaj <mhal@rbox.co> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-12virtio/vsock: Fix accept_queue memory leakMichal Luczaj
As the final stages of socket destruction may be delayed, it is possible that virtio_transport_recv_listen() will be called after the accept_queue has been flushed, but before the SOCK_DONE flag has been set. As a result, sockets enqueued after the flush would remain unremoved, leading to a memory leak. vsock_release __vsock_release lock virtio_transport_release virtio_transport_close schedule_delayed_work(close_work) sk_shutdown = SHUTDOWN_MASK (!) flush accept_queue release virtio_transport_recv_pkt vsock_find_bound_socket lock if flag(SOCK_DONE) return virtio_transport_recv_listen child = vsock_create_connected (!) vsock_enqueue_accept(child) release close_work lock virtio_transport_do_close set_flag(SOCK_DONE) virtio_transport_remove_sock vsock_remove_sock vsock_remove_bound release Introduce a sk_shutdown check to disallow vsock_enqueue_accept() during socket destruction. unreferenced object 0xffff888109e3f800 (size 2040): comm "kworker/5:2", pid 371, jiffies 4294940105 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 28 00 0b 40 00 00 00 00 00 00 00 00 00 00 00 00 (..@............ backtrace (crc 9e5f4e84): [<ffffffff81418ff1>] kmem_cache_alloc_noprof+0x2c1/0x360 [<ffffffff81d27aa0>] sk_prot_alloc+0x30/0x120 [<ffffffff81d2b54c>] sk_alloc+0x2c/0x4b0 [<ffffffff81fe049a>] __vsock_create.constprop.0+0x2a/0x310 [<ffffffff81fe6d6c>] virtio_transport_recv_pkt+0x4dc/0x9a0 [<ffffffff81fe745d>] vsock_loopback_work+0xfd/0x140 [<ffffffff810fc6ac>] process_one_work+0x20c/0x570 [<ffffffff810fce3f>] worker_thread+0x1bf/0x3a0 [<ffffffff811070dd>] kthread+0xdd/0x110 [<ffffffff81044fdd>] ret_from_fork+0x2d/0x50 [<ffffffff8100785a>] ret_from_fork_asm+0x1a/0x30 Fixes: 3fe356d58efa ("vsock/virtio: discard packets only when socket is really closed") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-12net: Implement fault injection forcing skb reallocationBreno Leitao
Introduce a fault injection mechanism to force skb reallocation. The primary goal is to catch bugs related to pointer invalidation after potential skb reallocation. The fault injection mechanism aims to identify scenarios where callers retain pointers to various headers in the skb but fail to reload these pointers after calling a function that may reallocate the data. This type of bug can lead to memory corruption or crashes if the old, now-invalid pointers are used. By forcing reallocation through fault injection, we can stress-test code paths and ensure proper pointer management after potential skb reallocations. Add a hook for fault injection in the following functions: * pskb_trim_rcsum() * pskb_may_pull_reason() * pskb_trim() As the other fault injection mechanism, protect it under a debug Kconfig called CONFIG_FAIL_SKB_REALLOC. This patch was *heavily* inspired by Jakub's proposal from: https://lore.kernel.org/all/20240719174140.47a868e6@kernel.org/ CC: Akinobu Mita <akinobu.mita@gmail.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Guillaume Nault <gnault@redhat.com> Link: https://patch.msgid.link/20241107-fault_v6-v6-1-1b82cb6ecacd@debian.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-12net: ip: make ip_route_use_hint() return drop reasonsMenglong Dong
In this commit, we make ip_route_use_hint() return drop reasons. The drop reasons that we return are similar to what we do in ip_route_input_slow(), and no drop reasons are added in this commit. Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-12net: ip: make ip_mkroute_input/__mkroute_input return drop reasonsMenglong Dong
In this commit, we make ip_mkroute_input() and __mkroute_input() return drop reasons. The drop reason "SKB_DROP_REASON_ARP_PVLAN_DISABLE" is introduced for the case: the packet which is not IP is forwarded to the in_dev, and the proxy_arp_pvlan is not enabled. Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-12net: ip: make ip_route_input() return drop reasonsMenglong Dong
In this commit, we make ip_route_input() return skb drop reasons that come from ip_route_input_noref(). Meanwhile, adjust all the call to it. Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-12net: ip: make ip_route_input_noref() return drop reasonsMenglong Dong
In this commit, we make ip_route_input_noref() return drop reasons, which come from ip_route_input_rcu(). We need adjust the callers of ip_route_input_noref() to make sure the return value of ip_route_input_noref() is used properly. The errno that ip_route_input_noref() returns comes from ip_route_input and bpf_lwt_input_reroute in the origin logic, and we make them return -EINVAL on error instead. In the following patch, we will make ip_route_input() returns drop reasons too. Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-12net: ip: make ip_route_input_rcu() return drop reasonsMenglong Dong
In this commit, we make ip_route_input_rcu() return drop reasons, which come from ip_route_input_mc() and ip_route_input_slow(). The only caller of ip_route_input_rcu() is ip_route_input_noref(). We adjust it by making it return -EINVAL on error and ignore the reasons that ip_route_input_rcu() returns. In the following patch, we will make ip_route_input_noref() returns the drop reasons. Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-12net: ip: make ip_route_input_slow() return drop reasonsMenglong Dong
In this commit, we make ip_route_input_slow() return skb drop reasons, and following new skb drop reasons are added: SKB_DROP_REASON_IP_INVALID_DEST The only caller of ip_route_input_slow() is ip_route_input_rcu(), and we adjust it by making it return -EINVAL on error. Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-12net: ip: make ip_mc_validate_source() return drop reasonMenglong Dong
Make ip_mc_validate_source() return drop reason, and adjust the call of it in ip_route_input_mc(). Another caller of it is ip_rcv_finish_core->udp_v4_early_demux, and the errno is not checked in detail, so we don't do more adjustment for it. The drop reason "SKB_DROP_REASON_IP_LOCALNET" is added in this commit. Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-12net: ip: make ip_route_input_mc() return drop reasonMenglong Dong
Make ip_route_input_mc() return drop reason, and adjust the call of it in ip_route_input_rcu(). Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-12net: ip: make fib_validate_source() support drop reasonsMenglong Dong
In this commit, we make fib_validate_source() and __fib_validate_source() return -reason instead of errno on error. The return value of fib_validate_source can be -errno, 0, and 1. It's hard to make fib_validate_source() return drop reasons directly. The fib_validate_source() will return 1 if the scope of the source(revert) route is HOST. And the __mkroute_input() will mark the skb with IPSKB_DOREDIRECT in this case (combine with some other conditions). And then, a REDIRECT ICMP will be sent in ip_forward() if this flag exists. We can't pass this information to __mkroute_input if we make fib_validate_source() return drop reasons. Therefore, we introduce the wrapper fib_validate_source_reason() for fib_validate_source(), which will return the drop reasons on error. In the origin logic, LINUX_MIB_IPRPFILTER will be counted if fib_validate_source() return -EXDEV. And now, we need to adjust it by checking "reason == SKB_DROP_REASON_IP_RPFILTER". However, this will take effect only after the patch "net: ip: make ip_route_input_noref() return drop reasons", as we can't pass the drop reasons from fib_validate_source() to ip_rcv_finish_core() in this patch. Following new drop reasons are added in this patch: SKB_DROP_REASON_IP_LOCAL_SOURCE SKB_DROP_REASON_IP_INVALID_SOURCE Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-11net: ipv4: Cache pmtu for all packet paths if multipath enabledVladimir Vdovin
Check number of paths by fib_info_num_path(), and update_or_create_fnhe() for every path. Problem is that pmtu is cached only for the oif that has received icmp message "need to frag", other oifs will still try to use "default" iface mtu. An example topology showing the problem: | host1 +---------+ | dummy0 | 10.179.20.18/32 mtu9000 +---------+ +-----------+----------------+ +---------+ +---------+ | ens17f0 | 10.179.2.141/31 | ens17f1 | 10.179.2.13/31 +---------+ +---------+ | (all here have mtu 9000) | +------+ +------+ | ro1 | 10.179.2.140/31 | ro2 | 10.179.2.12/31 +------+ +------+ | | ---------+------------+-------------------+------ | +-----+ | ro3 | 10.10.10.10 mtu1500 +-----+ | ======================================== some networks ======================================== | +-----+ | eth0| 10.10.30.30 mtu9000 +-----+ | host2 host1 have enabled multipath and sysctl net.ipv4.fib_multipath_hash_policy = 1: default proto static src 10.179.20.18 nexthop via 10.179.2.12 dev ens17f1 weight 1 nexthop via 10.179.2.140 dev ens17f0 weight 1 When host1 tries to do pmtud from 10.179.20.18/32 to host2, host1 receives at ens17f1 iface an icmp packet from ro3 that ro3 mtu=1500. And host1 caches it in nexthop exceptions cache. Problem is that it is cached only for the iface that has received icmp, and there is no way that ro3 will send icmp msg to host1 via another path. Host1 now have this routes to host2: ip r g 10.10.30.30 sport 30000 dport 443 10.10.30.30 via 10.179.2.12 dev ens17f1 src 10.179.20.18 uid 0 cache expires 521sec mtu 1500 ip r g 10.10.30.30 sport 30033 dport 443 10.10.30.30 via 10.179.2.140 dev ens17f0 src 10.179.20.18 uid 0 cache So when host1 tries again to reach host2 with mtu>1500, if packet flow is lucky enough to be hashed with oif=ens17f1 its ok, if oif=ens17f0 it blackholes and still gets icmp msgs from ro3 to ens17f1, until lucky day when ro3 will send it through another flow to ens17f0. Signed-off-by: Vladimir Vdovin <deliran@verdict.gg> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20241108093427.317942-1-deliran@verdict.gg Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11mptcp: cope racing subflow creation in mptcp_rcv_space_adjustPaolo Abeni
Additional active subflows - i.e. created by the in kernel path manager - are included into the subflow list before starting the 3whs. A racing recvmsg() spooling data received on an already established subflow would unconditionally call tcp_cleanup_rbuf() on all the current subflows, potentially hitting a divide by zero error on the newly created ones. Explicitly check that the subflow is in a suitable state before invoking tcp_cleanup_rbuf(). Fixes: c76c6956566f ("mptcp: call tcp_cleanup_rbuf on subflows") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/02374660836e1b52afc91966b7535c8c5f7bafb0.1731060874.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11mptcp: error out earlier on disconnectPaolo Abeni
Eric reported a division by zero splat in the MPTCP protocol: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 6094 Comm: syz-executor317 Not tainted 6.12.0-rc5-syzkaller-00291-g05b92660cdfe #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__tcp_select_window+0x5b4/0x1310 net/ipv4/tcp_output.c:3163 Code: f6 44 01 e3 89 df e8 9b 75 09 f8 44 39 f3 0f 8d 11 ff ff ff e8 0d 74 09 f8 45 89 f4 e9 04 ff ff ff e8 00 74 09 f8 44 89 f0 99 <f7> 7c 24 14 41 29 d6 45 89 f4 e9 ec fe ff ff e8 e8 73 09 f8 48 89 RSP: 0018:ffffc900041f7930 EFLAGS: 00010293 RAX: 0000000000017e67 RBX: 0000000000017e67 RCX: ffffffff8983314b RDX: 0000000000000000 RSI: ffffffff898331b0 RDI: 0000000000000004 RBP: 00000000005d6000 R08: 0000000000000004 R09: 0000000000017e67 R10: 0000000000003e80 R11: 0000000000000000 R12: 0000000000003e80 R13: ffff888031d9b440 R14: 0000000000017e67 R15: 00000000002eb000 FS: 00007feb5d7f16c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007feb5d8adbb8 CR3: 0000000074e4c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __tcp_cleanup_rbuf+0x3e7/0x4b0 net/ipv4/tcp.c:1493 mptcp_rcv_space_adjust net/mptcp/protocol.c:2085 [inline] mptcp_recvmsg+0x2156/0x2600 net/mptcp/protocol.c:2289 inet_recvmsg+0x469/0x6a0 net/ipv4/af_inet.c:885 sock_recvmsg_nosec net/socket.c:1051 [inline] sock_recvmsg+0x1b2/0x250 net/socket.c:1073 __sys_recvfrom+0x1a5/0x2e0 net/socket.c:2265 __do_sys_recvfrom net/socket.c:2283 [inline] __se_sys_recvfrom net/socket.c:2279 [inline] __x64_sys_recvfrom+0xe0/0x1c0 net/socket.c:2279 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7feb5d857559 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007feb5d7f1208 EFLAGS: 00000246 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00007feb5d8e1318 RCX: 00007feb5d857559 RDX: 000000800000000e RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007feb5d8e1310 R08: 0000000000000000 R09: ffffffff81000000 R10: 0000000000000100 R11: 0000000000000246 R12: 00007feb5d8e131c R13: 00007feb5d8ae074 R14: 000000800000000e R15: 00000000fffffdef and provided a nice reproducer. The root cause is the current bad handling of racing disconnect. After the blamed commit below, sk_wait_data() can return (with error) with the underlying socket disconnected and a zero rcv_mss. Catch the error and return without performing any additional operations on the current socket. Reported-by: Eric Dumazet <edumazet@google.com> Fixes: 419ce133ab92 ("tcp: allow again tcp_disconnect() when threads are waiting") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/8c82ecf71662ecbc47bf390f9905de70884c9f2d.1731060874.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11net: Add control functions for irq suspensionMartin Karsten
The napi_suspend_irqs routine bootstraps irq suspension by elongating the defer timeout to irq_suspend_timeout. The napi_resume_irqs routine effectively cancels irq suspension by forcing the napi to be scheduled immediately. Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca> Co-developed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Joe Damato <jdamato@fastly.com> Tested-by: Joe Damato <jdamato@fastly.com> Tested-by: Martin Karsten <mkarsten@uwaterloo.ca> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Link: https://patch.msgid.link/20241109050245.191288-3-jdamato@fastly.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11net: Add napi_struct parameter irq_suspend_timeoutMartin Karsten
Add a per-NAPI IRQ suspension parameter, which can be get/set with netdev-genl. This patch doesn't change any behavior but prepares the code for other changes in the following commits which use irq_suspend_timeout as a timeout for IRQ suspension. Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca> Co-developed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Joe Damato <jdamato@fastly.com> Tested-by: Joe Damato <jdamato@fastly.com> Tested-by: Martin Karsten <mkarsten@uwaterloo.ca> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Link: https://patch.msgid.link/20241109050245.191288-2-jdamato@fastly.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11net: fix SO_DEVMEM_DONTNEED looping too longMina Almasry
Exit early if we're freeing more than 1024 frags, to prevent looping too long. Also minor code cleanups: - Flip checks to reduce indentation. - Use sizeof(*tokens) everywhere for consistentcy. Cc: Yi Lai <yi1.lai@linux.intel.com> Signed-off-by: Mina Almasry <almasrymina@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20241107210331.3044434-1-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11rtnetlink: Register rtnl_dellink() and rtnl_setlink() with ↵Kuniyuki Iwashima
RTNL_FLAG_DOIT_PERNET_WIP. Currently, rtnl_setlink() and rtnl_dellink() cannot be fully converted to per-netns RTNL due to a lack of handling peer/lower/upper devices in different netns. For example, when we change a device in rtnl_setlink() and need to propagate that to its upper devices, we want to avoid acquiring all netns locks, for which we do not know the upper limit. The same situation happens when we remove a device. rtnl_dellink() could be transformed to remove a single device in the requested netns and delegate other devices to per-netns work, and rtnl_setlink() might be ? Until we come up with a better idea, let's use a new flag RTNL_FLAG_DOIT_PERNET_WIP for rtnl_dellink() and rtnl_setlink(). This will unblock converting RTNL users where such devices are not related. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241108004823.29419-11-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11rtnetlink: Convert RTM_NEWLINK to per-netns RTNL.Kuniyuki Iwashima
Now, we are ready to convert rtnl_newlink() to per-netns RTNL; rtnl_link_ops is protected by SRCU and netns is prefetched in rtnl_newlink(). Let's register rtnl_newlink() with RTNL_FLAG_DOIT_PERNET and push RTNL down as rtnl_nets_lock(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20241108004823.29419-10-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11rtnetlink: Add peer_type in struct rtnl_link_ops.Kuniyuki Iwashima
In ops->newlink(), veth, vxcan, and netkit call rtnl_link_get_net() with a net pointer, which is the first argument of ->newlink(). rtnl_link_get_net() could return another netns based on IFLA_NET_NS_PID and IFLA_NET_NS_FD in the peer device's attributes. We want to get it and fill rtnl_nets->nets[] in advance in rtnl_newlink() for per-netns RTNL. All of the three get the peer netns in the same way: 1. Call rtnl_nla_parse_ifinfomsg() 2. Call ops->validate() (vxcan doesn't have) 3. Call rtnl_link_get_net_tb() Let's add a new field peer_type to struct rtnl_link_ops and prefetch netns in the peer ifla to add it to rtnl_nets in rtnl_newlink(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20241108004823.29419-6-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11rtnetlink: Introduce struct rtnl_nets and helpers.Kuniyuki Iwashima
rtnl_newlink() needs to hold 3 per-netns RTNL: 2 for a new device and 1 for its peer. We will add rtnl_nets_lock() later, which performs the nested locking based on struct rtnl_nets, which has an array of struct net pointers. rtnl_nets_add() adds a net pointer to the array and sorts it so that rtnl_nets_lock() can simply acquire per-netns RTNL from array[0] to [2]. Before calling rtnl_nets_add(), get_net() must be called for the net, and rtnl_nets_destroy() will call put_net() for each. Let's apply the helpers to rtnl_newlink(). When CONFIG_DEBUG_NET_SMALL_RTNL is disabled, we do not call rtnl_net_lock() thus do not care about the array order, so rtnl_net_cmp_locks() returns -1 so that the loop in rtnl_nets_add() can be optimised to NOP. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20241108004823.29419-5-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11rtnetlink: Remove __rtnl_link_register()Kuniyuki Iwashima
link_ops is protected by link_ops_mutex and no longer needs RTNL, so we have no reason to have __rtnl_link_register() separately. Let's remove it and call rtnl_link_register() from ifb.ko and dummy.ko. Note that both modules' init() work on init_net only, so we need not export pernet_ops_rwsem and can use rtnl_net_lock() there. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20241108004823.29419-4-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11rtnetlink: Protect link_ops by mutex.Kuniyuki Iwashima
rtnl_link_unregister() holds RTNL and calls synchronize_srcu(), but rtnl_newlink() will acquire SRCU frist and then RTNL. Then, we need to unlink ops and call synchronize_srcu() outside of RTNL to avoid the deadlock. rtnl_link_unregister() rtnl_newlink() ---- ---- lock(rtnl_mutex); lock(&ops->srcu); lock(rtnl_mutex); sync(&ops->srcu); Let's move as such and add a mutex to protect link_ops. Now, link_ops is protected by its dedicated mutex and rtnl_link_register() no longer needs to hold RTNL. While at it, we move the initialisation of ops->dellink and ops->srcu out of the mutex scope. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20241108004823.29419-3-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11rtnetlink: Remove __rtnl_link_unregister().Kuniyuki Iwashima
rtnl_link_unregister() holds RTNL and calls __rtnl_link_unregister(), where we call synchronize_srcu() to wait inflight RTM_NEWLINK requests for per-netns RTNL. We put synchronize_srcu() in __rtnl_link_unregister() due to ifb.ko and dummy.ko. However, rtnl_newlink() will acquire SRCU before RTNL later in this series. Then, lockdep will detect the deadlock: rtnl_link_unregister() rtnl_newlink() ---- ---- lock(rtnl_mutex); lock(&ops->srcu); lock(rtnl_mutex); sync(&ops->srcu); To avoid the problem, we must call synchronize_srcu() before RTNL in rtnl_link_unregister(). As a preparation, let's remove __rtnl_link_unregister(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20241108004823.29419-2-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11net: hsr: Add VLAN CTAG filter supportMurali Karicheri
This patch adds support for VLAN ctag based filtering at slave devices. The slave ethernet device may be capable of filtering ethernet packets based on VLAN ID. This requires that when the VLAN interface is created over an HSR/PRP interface, it passes the VID information to the associated slave ethernet devices so that it updates the hardware filters to filter ethernet frames based on VID. This patch adds the required functions to propagate the vid information to the slave devices. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20241106091710.3308519-3-danishanwar@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11net: hsr: Add VLAN supportWingMan Kwok
Add support for creating VLAN interfaces over HSR/PRP interface. Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20241106091710.3308519-2-danishanwar@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11net: fix data-races around sk->sk_forward_allocWang Liang
Syzkaller reported this warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 16 at net/ipv4/af_inet.c:156 inet_sock_destruct+0x1c5/0x1e0 Modules linked in: CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.12.0-rc5 #26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:inet_sock_destruct+0x1c5/0x1e0 Code: 24 12 4c 89 e2 5b 48 c7 c7 98 ec bb 82 41 5c e9 d1 18 17 ff 4c 89 e6 5b 48 c7 c7 d0 ec bb 82 41 5c e9 bf 18 17 ff 0f 0b eb 83 <0f> 0b eb 97 0f 0b eb 87 0f 0b e9 68 ff ff ff 66 66 2e 0f 1f 84 00 RSP: 0018:ffffc9000008bd90 EFLAGS: 00010206 RAX: 0000000000000300 RBX: ffff88810b172a90 RCX: 0000000000000007 RDX: 0000000000000002 RSI: 0000000000000300 RDI: ffff88810b172a00 RBP: ffff88810b172a00 R08: ffff888104273c00 R09: 0000000000100007 R10: 0000000000020000 R11: 0000000000000006 R12: ffff88810b172a00 R13: 0000000000000004 R14: 0000000000000000 R15: ffff888237c31f78 FS: 0000000000000000(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffc63fecac8 CR3: 000000000342e000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x88/0x130 ? inet_sock_destruct+0x1c5/0x1e0 ? report_bug+0x18e/0x1a0 ? handle_bug+0x53/0x90 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? inet_sock_destruct+0x1c5/0x1e0 __sk_destruct+0x2a/0x200 rcu_do_batch+0x1aa/0x530 ? rcu_do_batch+0x13b/0x530 rcu_core+0x159/0x2f0 handle_softirqs+0xd3/0x2b0 ? __pfx_smpboot_thread_fn+0x10/0x10 run_ksoftirqd+0x25/0x30 smpboot_thread_fn+0xdd/0x1d0 kthread+0xd3/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]--- Its possible that two threads call tcp_v6_do_rcv()/sk_forward_alloc_add() concurrently when sk->sk_state == TCP_LISTEN with sk->sk_lock unlocked, which triggers a data-race around sk->sk_forward_alloc: tcp_v6_rcv tcp_v6_do_rcv skb_clone_and_charge_r sk_rmem_schedule __sk_mem_schedule sk_forward_alloc_add() skb_set_owner_r sk_mem_charge sk_forward_alloc_add() __kfree_skb skb_release_all skb_release_head_state sock_rfree sk_mem_uncharge sk_forward_alloc_add() sk_mem_reclaim // set local var reclaimable __sk_mem_reclaim sk_forward_alloc_add() In this syzkaller testcase, two threads call tcp_v6_do_rcv() with skb->truesize=768, the sk_forward_alloc changes like this: (cpu 1) | (cpu 2) | sk_forward_alloc ... | ... | 0 __sk_mem_schedule() | | +4096 = 4096 | __sk_mem_schedule() | +4096 = 8192 sk_mem_charge() | | -768 = 7424 | sk_mem_charge() | -768 = 6656 ... | ... | sk_mem_uncharge() | | +768 = 7424 reclaimable=7424 | | | sk_mem_uncharge() | +768 = 8192 | reclaimable=8192 | __sk_mem_reclaim() | | -4096 = 4096 | __sk_mem_reclaim() | -8192 = -4096 != 0 The skb_clone_and_charge_r() should not be called in tcp_v6_do_rcv() when sk->sk_state is TCP_LISTEN, it happens later in tcp_v6_syn_recv_sock(). Fix the same issue in dccp_v6_do_rcv(). Suggested-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Fixes: e994b2f0fb92 ("tcp: do not lock listener to process SYN packets") Signed-off-by: Wang Liang <wangliang74@huawei.com> Link: https://patch.msgid.link/20241107023405.889239-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11rxrpc: Add a tracepoint for aborts being proposedDavid Howells
Add a tracepoint to rxrpc to trace the proposal of an abort. The abort is performed asynchronously by the I/O thread. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Simon Horman <horms@kernel.org> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/726356.1730898045@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11ipv6: Fix soft lockups in fib6_select_path under high next hop churnOmid Ehtemam-Haghighi
Soft lockups have been observed on a cluster of Linux-based edge routers located in a highly dynamic environment. Using the `bird` service, these routers continuously update BGP-advertised routes due to frequently changing nexthop destinations, while also managing significant IPv6 traffic. The lockups occur during the traversal of the multipath circular linked-list in the `fib6_select_path` function, particularly while iterating through the siblings in the list. The issue typically arises when the nodes of the linked list are unexpectedly deleted concurrently on a different core—indicated by their 'next' and 'previous' elements pointing back to the node itself and their reference count dropping to zero. This results in an infinite loop, leading to a soft lockup that triggers a system panic via the watchdog timer. Apply RCU primitives in the problematic code sections to resolve the issue. Where necessary, update the references to fib6_siblings to annotate or use the RCU APIs. Include a test script that reproduces the issue. The script periodically updates the routing table while generating a heavy load of outgoing IPv6 traffic through multiple iperf3 clients. It consistently induces infinite soft lockups within a couple of minutes. Kernel log: 0 [ffffbd13003e8d30] machine_kexec at ffffffff8ceaf3eb 1 [ffffbd13003e8d90] __crash_kexec at ffffffff8d0120e3 2 [ffffbd13003e8e58] panic at ffffffff8cef65d4 3 [ffffbd13003e8ed8] watchdog_timer_fn at ffffffff8d05cb03 4 [ffffbd13003e8f08] __hrtimer_run_queues at ffffffff8cfec62f 5 [ffffbd13003e8f70] hrtimer_interrupt at ffffffff8cfed756 6 [ffffbd13003e8fd0] __sysvec_apic_timer_interrupt at ffffffff8cea01af 7 [ffffbd13003e8ff0] sysvec_apic_timer_interrupt at ffffffff8df1b83d -- <IRQ stack> -- 8 [ffffbd13003d3708] asm_sysvec_apic_timer_interrupt at ffffffff8e000ecb [exception RIP: fib6_select_path+299] RIP: ffffffff8ddafe7b RSP: ffffbd13003d37b8 RFLAGS: 00000287 RAX: ffff975850b43600 RBX: ffff975850b40200 RCX: 0000000000000000 RDX: 000000003fffffff RSI: 0000000051d383e4 RDI: ffff975850b43618 RBP: ffffbd13003d3800 R8: 0000000000000000 R9: ffff975850b40200 R10: 0000000000000000 R11: 0000000000000000 R12: ffffbd13003d3830 R13: ffff975850b436a8 R14: ffff975850b43600 R15: 0000000000000007 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 9 [ffffbd13003d3808] ip6_pol_route at ffffffff8ddb030c 10 [ffffbd13003d3888] ip6_pol_route_input at ffffffff8ddb068c 11 [ffffbd13003d3898] fib6_rule_lookup at ffffffff8ddf02b5 12 [ffffbd13003d3928] ip6_route_input at ffffffff8ddb0f47 13 [ffffbd13003d3a18] ip6_rcv_finish_core.constprop.0 at ffffffff8dd950d0 14 [ffffbd13003d3a30] ip6_list_rcv_finish.constprop.0 at ffffffff8dd96274 15 [ffffbd13003d3a98] ip6_sublist_rcv at ffffffff8dd96474 16 [ffffbd13003d3af8] ipv6_list_rcv at ffffffff8dd96615 17 [ffffbd13003d3b60] __netif_receive_skb_list_core at ffffffff8dc16fec 18 [ffffbd13003d3be0] netif_receive_skb_list_internal at ffffffff8dc176b3 19 [ffffbd13003d3c50] napi_gro_receive at ffffffff8dc565b9 20 [ffffbd13003d3c80] ice_receive_skb at ffffffffc087e4f5 [ice] 21 [ffffbd13003d3c90] ice_clean_rx_irq at ffffffffc0881b80 [ice] 22 [ffffbd13003d3d20] ice_napi_poll at ffffffffc088232f [ice] 23 [ffffbd13003d3d80] __napi_poll at ffffffff8dc18000 24 [ffffbd13003d3db8] net_rx_action at ffffffff8dc18581 25 [ffffbd13003d3e40] __do_softirq at ffffffff8df352e9 26 [ffffbd13003d3eb0] run_ksoftirqd at ffffffff8ceffe47 27 [ffffbd13003d3ec0] smpboot_thread_fn at ffffffff8cf36a30 28 [ffffbd13003d3ee8] kthread at ffffffff8cf2b39f 29 [ffffbd13003d3f28] ret_from_fork at ffffffff8ce5fa64 30 [ffffbd13003d3f50] ret_from_fork_asm at ffffffff8ce03cbb Fixes: 66f5d6ce53e6 ("ipv6: replace rwlock with rcu and spinlock in fib6_table") Reported-by: Adrian Oliver <kernel@aoliver.ca> Signed-off-by: Omid Ehtemam-Haghighi <omid.ehtemamhaghighi@menlosecurity.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Ido Schimmel <idosch@idosch.org> Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: Simon Horman <horms@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20241106010236.1239299-1-omid.ehtemamhaghighi@menlosecurity.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11mm: page_frag: avoid caller accessing 'page_frag_cache' directlyYunsheng Lin
Use appropriate frag_page API instead of caller accessing 'page_frag_cache' directly. CC: Andrew Morton <akpm@linux-foundation.org> CC: Linux-MM <linux-mm@kvack.org> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Link: https://patch.msgid.link/20241028115343.3405838-5-linyunsheng@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11svcrdma: Address an integer overflowChuck Lever
Dan Carpenter reports: > Commit 78147ca8b4a9 ("svcrdma: Add a "parsed chunk list" data > structure") from Jun 22, 2020 (linux-next), leads to the following > Smatch static checker warning: > > net/sunrpc/xprtrdma/svc_rdma_recvfrom.c:498 xdr_check_write_chunk() > warn: potential user controlled sizeof overflow 'segcount * 4 * 4' > > net/sunrpc/xprtrdma/svc_rdma_recvfrom.c > 488 static bool xdr_check_write_chunk(struct svc_rdma_recv_ctxt *rctxt) > 489 { > 490 u32 segcount; > 491 __be32 *p; > 492 > 493 if (xdr_stream_decode_u32(&rctxt->rc_stream, &segcount)) > ^^^^^^^^ > > 494 return false; > 495 > 496 /* A bogus segcount causes this buffer overflow check to fail. */ > 497 p = xdr_inline_decode(&rctxt->rc_stream, > --> 498 segcount * rpcrdma_segment_maxsz * sizeof(*p)); > > > segcount is an untrusted u32. On 32bit systems anything >= SIZE_MAX / 16 will > have an integer overflow and some those values will be accepted by > xdr_inline_decode(). Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: 78147ca8b4a9 ("svcrdma: Add a "parsed chunk list" data structure") Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-11-11net: convert to nla_get_*_default()Johannes Berg
Most of the original conversion is from the spatch below, but I edited some and left out other instances that were either buggy after conversion (where default values don't fit into the type) or just looked strange. @@ expression attr, def; expression val; identifier fn =~ "^nla_get_.*"; fresh identifier dfn = fn ## "_default"; @@ ( -if (attr) - val = fn(attr); -else - val = def; +val = dfn(attr, def); | -if (!attr) - val = def; -else - val = fn(attr); +val = dfn(attr, def); | -if (!attr) - return def; -return fn(attr); +return dfn(attr, def); | -attr ? fn(attr) : def +dfn(attr, def) | -!attr ? def : fn(attr) +dfn(attr, def) ) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Toke Høiland-Jørgensen <toke@kernel.org> Link: https://patch.msgid.link/20241108114145.0580b8684e7f.I740beeaa2f70ebfc19bfca1045a24d6151992790@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes from Michael Tsirkin: "Several small bugfixes all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa/mlx5: Fix error path during device add vp_vdpa: fix id_table array not null terminated error virtio_pci: Fix admin vq cleanup by using correct info pointer vDPA/ifcvf: Fix pci_read_config_byte() return code handling Fix typo in vringh_test.c vdpa: solidrun: Fix UB bug with devres vsock/virtio: Initialization of the dangling pointer occurring in vsk->trans
2024-11-09bridge: Allow deleting FDB entries with non-existent VLANIdo Schimmel
It is currently impossible to delete individual FDB entries (as opposed to flushing) that were added with a VLAN that no longer exists: # ip link add name dummy1 up type dummy # ip link add name br1 up type bridge vlan_filtering 1 # ip link set dev dummy1 master br1 # bridge fdb add 00:11:22:33:44:55 dev dummy1 master static vlan 1 # bridge vlan del vid 1 dev dummy1 # bridge fdb get 00:11:22:33:44:55 br br1 vlan 1 00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static # bridge fdb del 00:11:22:33:44:55 dev dummy1 master vlan 1 RTNETLINK answers: Invalid argument # bridge fdb get 00:11:22:33:44:55 br br1 vlan 1 00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static This is in contrast to MDB entries that can be deleted after the VLAN was deleted: # bridge vlan add vid 10 dev dummy1 # bridge mdb add dev br1 port dummy1 grp 239.1.1.1 permanent vid 10 # bridge vlan del vid 10 dev dummy1 # bridge mdb get dev br1 grp 239.1.1.1 vid 10 dev br1 port dummy1 grp 239.1.1.1 permanent vid 10 # bridge mdb del dev br1 port dummy1 grp 239.1.1.1 permanent vid 10 # bridge mdb get dev br1 grp 239.1.1.1 vid 10 Error: bridge: MDB entry not found. Align the two interfaces and allow user space to delete FDB entries that were added with a VLAN that no longer exists: # ip link add name dummy1 up type dummy # ip link add name br1 up type bridge vlan_filtering 1 # ip link set dev dummy1 master br1 # bridge fdb add 00:11:22:33:44:55 dev dummy1 master static vlan 1 # bridge vlan del vid 1 dev dummy1 # bridge fdb get 00:11:22:33:44:55 br br1 vlan 1 00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static # bridge fdb del 00:11:22:33:44:55 dev dummy1 master vlan 1 # bridge fdb get 00:11:22:33:44:55 br br1 vlan 1 Error: Fdb entry not found. Add a selftest to make sure this behavior does not regress: # ./rtnetlink.sh -t kci_test_fdb_del PASS: bridge fdb del Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20241105133954.350479-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-09neighbour: Create netdev->neighbour associationGilad Naaman
Create a mapping between a netdev and its neighoburs, allowing for much cheaper flushes. Signed-off-by: Gilad Naaman <gnaaman@drivenets.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20241107160444.2913124-7-gnaaman@drivenets.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-09neighbour: Remove bare neighbour::next pointerGilad Naaman
Remove the now-unused neighbour::next pointer, leaving struct neighbour solely with the hlist_node implementation. Signed-off-by: Gilad Naaman <gnaaman@drivenets.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241107160444.2913124-6-gnaaman@drivenets.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-09neighbour: Convert iteration to use hlist+macroGilad Naaman
Remove all usage of the bare neighbour::next pointer, replacing them with neighbour::hash and its for_each macro. Signed-off-by: Gilad Naaman <gnaaman@drivenets.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241107160444.2913124-5-gnaaman@drivenets.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-09neighbour: Convert seq_file functions to use hlistGilad Naaman
Convert seq_file-related neighbour functionality to use neighbour::hash and the related for_each macro. Signed-off-by: Gilad Naaman <gnaaman@drivenets.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241107160444.2913124-4-gnaaman@drivenets.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-09neighbour: Add hlist_node to struct neighbourGilad Naaman
Add a doubly-linked node to neighbours, so that they can be deleted without iterating the entire bucket they're in. Signed-off-by: Gilad Naaman <gnaaman@drivenets.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241107160444.2913124-2-gnaaman@drivenets.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-09sctp: fix possible UAF in sctp_v6_available()Eric Dumazet
A lockdep report [1] with CONFIG_PROVE_RCU_LIST=y hints that sctp_v6_available() is calling dev_get_by_index_rcu() and ipv6_chk_addr() without holding rcu. [1] ============================= WARNING: suspicious RCU usage 6.12.0-rc5-virtme #1216 Tainted: G W ----------------------------- net/core/dev.c:876 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by sctp_hello/31495: #0: ffff9f1ebbdb7418 (sk_lock-AF_INET6){+.+.}-{0:0}, at: sctp_bind (./arch/x86/include/asm/jump_label.h:27 net/sctp/socket.c:315) sctp stack backtrace: CPU: 7 UID: 0 PID: 31495 Comm: sctp_hello Tainted: G W 6.12.0-rc5-virtme #1216 Tainted: [W]=WARN Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822) dev_get_by_index_rcu (net/core/dev.c:876 (discriminator 7)) sctp_v6_available (net/sctp/ipv6.c:701) sctp sctp_do_bind (net/sctp/socket.c:400 (discriminator 1)) sctp sctp_bind (net/sctp/socket.c:320) sctp inet6_bind_sk (net/ipv6/af_inet6.c:465) ? security_socket_bind (security/security.c:4581 (discriminator 1)) __sys_bind (net/socket.c:1848 net/socket.c:1869) ? do_user_addr_fault (./include/linux/rcupdate.h:347 ./include/linux/rcupdate.h:880 ./include/linux/mm.h:729 arch/x86/mm/fault.c:1340) ? do_user_addr_fault (./arch/x86/include/asm/preempt.h:84 (discriminator 13) ./include/linux/rcupdate.h:98 (discriminator 13) ./include/linux/rcupdate.h:882 (discriminator 13) ./include/linux/mm.h:729 (discriminator 13) arch/x86/mm/fault.c:1340 (discriminator 13)) __x64_sys_bind (net/socket.c:1877 (discriminator 1) net/socket.c:1875 (discriminator 1) net/socket.c:1875 (discriminator 1)) do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f59b934a1e7 Code: 44 00 00 48 8b 15 39 8c 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 09 8c 0c 00 f7 d8 64 89 01 48 All code ======== 0: 44 00 00 add %r8b,(%rax) 3: 48 8b 15 39 8c 0c 00 mov 0xc8c39(%rip),%rdx # 0xc8c43 a: f7 d8 neg %eax c: 64 89 02 mov %eax,%fs:(%rdx) f: b8 ff ff ff ff mov $0xffffffff,%eax 14: eb bd jmp 0xffffffffffffffd3 16: 66 2e 0f 1f 84 00 00 cs nopw 0x0(%rax,%rax,1) 1d: 00 00 00 20: 0f 1f 00 nopl (%rax) 23: b8 31 00 00 00 mov $0x31,%eax 28: 0f 05 syscall 2a:* 48 3d 01 f0 ff ff cmp $0xfffffffffffff001,%rax <-- trapping instruction 30: 73 01 jae 0x33 32: c3 ret 33: 48 8b 0d 09 8c 0c 00 mov 0xc8c09(%rip),%rcx # 0xc8c43 3a: f7 d8 neg %eax 3c: 64 89 01 mov %eax,%fs:(%rcx) 3f: 48 rex.W Code starting with the faulting instruction =========================================== 0: 48 3d 01 f0 ff ff cmp $0xfffffffffffff001,%rax 6: 73 01 jae 0x9 8: c3 ret 9: 48 8b 0d 09 8c 0c 00 mov 0xc8c09(%rip),%rcx # 0xc8c19 10: f7 d8 neg %eax 12: 64 89 01 mov %eax,%fs:(%rcx) 15: 48 rex.W RSP: 002b:00007ffe2d0ad398 EFLAGS: 00000202 ORIG_RAX: 0000000000000031 RAX: ffffffffffffffda RBX: 00007ffe2d0ad3d0 RCX: 00007f59b934a1e7 RDX: 000000000000001c RSI: 00007ffe2d0ad3d0 RDI: 0000000000000005 RBP: 0000000000000005 R08: 1999999999999999 R09: 0000000000000000 R10: 00007f59b9253298 R11: 0000000000000202 R12: 00007ffe2d0ada61 R13: 0000000000000000 R14: 0000562926516dd8 R15: 00007f59b9479000 </TASK> Fixes: 6fe1e52490a9 ("sctp: check ipv6 addr with sk_bound_dev if set") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/20241107192021.2579789-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-09hv_sock: Initializing vsk->trans to NULL to prevent a dangling pointerHyunwoo Kim
When hvs is released, there is a possibility that vsk->trans may not be initialized to NULL, which could lead to a dangling pointer. This issue is resolved by initializing vsk->trans to NULL. Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://patch.msgid.link/Zys4hCj61V+mQfX2@v4bel-B760M-AORUS-ELITE-AX Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-09mptcp: remove the redundant assignment of 'new_ctx->tcp_sock' in ↵MoYuanhao
subflow_ulp_clone() The variable has already been assigned in the subflow_create_ctx(), So we don't need to reassign this variable in the subflow_ulp_clone(). Signed-off-by: MoYuanhao <moyuanhao3676@163.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241106071035.2591-1-moyuanhao3676@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-09net: mctp: Expose transport binding identifier via IFLA attributeKhang Nguyen
MCTP control protocol implementations are transport binding dependent. Endpoint discovery is mandatory based on transport binding. Message timing requirements are specified in each respective transport binding specification. However, we currently have no means to get this information from MCTP links. Add a IFLA_MCTP_PHYS_BINDING netlink link attribute, which represents the transport type using the DMTF DSP0239-defined type numbers, returned as part of RTM_GETLINK data. We get an IFLA_MCTP_PHYS_BINDING attribute for each MCTP link, for example: - 0x00 (unspec) for loopback interface; - 0x01 (SMBus/I2C) for mctpi2c%d interfaces; and - 0x05 (serial) for mctpserial%d interfaces. Signed-off-by: Khang Nguyen <khangng@os.amperecomputing.com> Reviewed-by: Matt Johnston <matt@codeconstruct.com.au> Link: https://patch.msgid.link/20241105071915.821871-1-khangng@os.amperecomputing.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-08bpf: Fix mismatched RCU unlock flavour in bpf_out_neigh_v6Jiawei Ye
In the bpf_out_neigh_v6 function, rcu_read_lock() is used to begin an RCU read-side critical section. However, when unlocking, one branch incorrectly uses a different RCU unlock flavour rcu_read_unlock_bh() instead of rcu_read_unlock(). This mismatch in RCU locking flavours can lead to unexpected behavior and potential concurrency issues. This possible bug was identified using a static analysis tool developed by myself, specifically designed to detect RCU-related issues. This patch corrects the mismatched unlock flavour by replacing the incorrect rcu_read_unlock_bh() with the appropriate rcu_read_unlock(), ensuring that the RCU critical section is properly exited. This change prevents potential synchronization issues and aligns with proper RCU usage patterns. Fixes: 09eed1192cec ("neighbour: switch to standard rcu, instead of rcu_bh") Signed-off-by: Jiawei Ye <jiawei.ye@foxmail.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/tencent_CFD3D1C3D68B45EA9F52D8EC76D2C4134306@qq.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-11-08SUNRPC: Fix a hang in TLS sock_close if sk_write_pendingBenjamin Coddington
We've observed an NFS server shrink the TCP window and then reset the TCP connection as part of a HA failover. When the connection has TLS, often the NFS client will hang indefinitely in this stack: wait_woken+0x70/0x80 wait_on_pending_writer+0xe4/0x110 [tls] tls_sk_proto_close+0x368/0x3a0 [tls] inet_release+0x54/0xb0 __sock_release+0x48/0xc8 sock_close+0x20/0x38 __fput+0xe0/0x2f0 __fput_sync+0x58/0x70 xs_reset_transport+0xe8/0x1f8 [sunrpc] xs_tcp_shutdown+0xa4/0x190 [sunrpc] xprt_autoclose+0x68/0x170 [sunrpc] process_one_work+0x180/0x420 worker_thread+0x258/0x368 kthread+0x104/0x118 ret_from_fork+0x10/0x20 This hang prevents the client from closing the socket and reconnecting to the server. Because xs_nospace() elevates sk_write_pending, and sk_sndtimeo is MAX_SCHEDULE_TIMEOUT, tls_sk_proto_close is never able to complete its wait for pending writes to the socket. For this case where we are resetting the transport anyway, we don't expect the socket to ever have write space, so fix this by simply clearing the sock's sndtimeo under the sock's lock. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 10:07:57 +0000