summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2014-07-14udp: Add udp_sock_create for UDP tunnels to open listener socketTom Herbert
Added udp_tunnel.c which can contain some common functions for UDP tunnels. The first function in this is udp_sock_create which is used to open the listener port for a UDP tunnel. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14neigh: sysctl - simplify address calculation of gc_* variablesMathias Krause
The code in neigh_sysctl_register() relies on a specific layout of struct neigh_table, namely that the 'gc_*' variables are directly following the 'parms' member in a specific order. The code, though, expresses this in the most ugly way. Get rid of the ugly casts and use the 'tbl' pointer to get a handle to the table. This way we can refer to the 'gc_*' variables directly. Similarly seen in the grsecurity patch, written by Brad Spengler. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14net: sctp: fix information leaks in ulpevent layerDaniel Borkmann
While working on some other SCTP code, I noticed that some structures shared with user space are leaking uninitialized stack or heap buffer. In particular, struct sctp_sndrcvinfo has a 2 bytes hole between .sinfo_flags and .sinfo_ppid that remains unfilled by us in sctp_ulpevent_read_sndrcvinfo() when putting this into cmsg. But also struct sctp_remote_error contains a 2 bytes hole that we don't fill but place into a skb through skb_copy_expand() via sctp_ulpevent_make_remote_error(). Both structures are defined by the IETF in RFC6458: * Section 5.3.2. SCTP Header Information Structure: The sctp_sndrcvinfo structure is defined below: struct sctp_sndrcvinfo { uint16_t sinfo_stream; uint16_t sinfo_ssn; uint16_t sinfo_flags; <-- 2 bytes hole --> uint32_t sinfo_ppid; uint32_t sinfo_context; uint32_t sinfo_timetolive; uint32_t sinfo_tsn; uint32_t sinfo_cumtsn; sctp_assoc_t sinfo_assoc_id; }; * 6.1.3. SCTP_REMOTE_ERROR: A remote peer may send an Operation Error message to its peer. This message indicates a variety of error conditions on an association. The entire ERROR chunk as it appears on the wire is included in an SCTP_REMOTE_ERROR event. Please refer to the SCTP specification [RFC4960] and any extensions for a list of possible error formats. An SCTP error notification has the following format: struct sctp_remote_error { uint16_t sre_type; uint16_t sre_flags; uint32_t sre_length; uint16_t sre_error; <-- 2 bytes hole --> sctp_assoc_t sre_assoc_id; uint8_t sre_data[]; }; Fix this by setting both to 0 before filling them out. We also have other structures shared between user and kernel space in SCTP that contains holes (e.g. struct sctp_paddrthlds), but we copy that buffer over from user space first and thus don't need to care about it in that cases. While at it, we can also remove lengthy comments copied from the draft, instead, we update the comment with the correct RFC number where one can look it up. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-13net: filter: sk_chk_filter() no longer mangles filterEric Dumazet
Add const attribute to filter argument to make clear it is no longer modified. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-13Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== Please pull this batch of updates intended for the 3.17 stream... This is primarily a Bluetooth pull. Gustavo says: "A lot of patches to 3.17. The bulk of changes here are for LE support. The 6loWPAN over Bluetooth now has it own module, we also have support for background auto-connection and passive scanning, Bluetooth device address provisioning, support for reading Bluetooth clock values and LE connection parameters plus many many fixes." The balance is just a pull of the wireless.git tree, to avoid some pending merge problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-11ipv6: Use BUG_ONHimangi Saraogi
The semantic patch that makes this transformation is as follows: // <smpl> @@ expression e; @@ -if (e) BUG(); +BUG_ON(e); // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-11net: ipv6: Use BUG_ONHimangi Saraogi
The semantic patch that makes the transformation is as follows: // <smpl> @@ expression e; @@ -if (e) BUG(); +BUG_ON(e); // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-11ipv6: addrconf: implement address generation modesJiri Pirko
This patch introduces a possibility for userspace to set various (so far two) modes of generating addresses. This is useful for example for NetworkManager because it can set the mode to NONE and take care of link local addresses itself. That allow it to have the interface up, monitoring carrier but still don't have any addresses on it. One more use-case by Dan Williams: <quote> WWAN devices often have their LL address provided by the firmware of the device, which sometimes refuses to respond to incorrect LL addresses when doing DHCPv6 or IPv6 ND. The kernel cannot generate the correct LL address for two reasons: 1) WWAN pseudo-ethernet interfaces often construct a fake MAC address, or read a meaningless MAC address from the firmware. Thus the EUI64 and the IPv6LL address the kernel assigns will be wrong. The real LL address is often retrieved from the firmware with AT or proprietary commands. 2) WWAN PPP interfaces receive their LL address from IPV6CP, not from kernel assignments. Only after IPV6CP has completed do we know the LL address of the PPP interface and its peer. But the kernel has already assigned an incorrect LL address to the interface. So being able to suppress the kernel LL address generation and assign the one retrieved from the firmware is less complicated and more robust. </quote> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-11net/hsr: Remove left-over never-true conditional code.Arvid Brodin
MacAddressB is an array (unsigned char MacAddressB[ETH_ALEN]) and is allocated as a part of *node_dst (which is a struct hsr_node). So the condition is always false. Detected by Dan Carpenter. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-11tipc: clear 'next'-pointer of message fragments before reassemblyJon Paul Maloy
If the 'next' pointer of the last fragment buffer in a message is not zeroed before reassembly, we risk ending up with a corrupt message, since the reassembly function itself isn't doing this. Currently, when a buffer is retrieved from the deferred queue of the broadcast link, the next pointer is not cleared, with the result as described above. This commit corrects this, and thereby fixes a bug that may occur when long broadcast messages are transmitted across dual interfaces. The bug has been present since 40ba3cdf542a469aaa9083fa041656e59b109b90 ("tipc: message reassembly using fragment chain") This commit should be applied to both net and net-next. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-11ipv4: remove the unnecessary variable in udp_mcast_nextLi RongQing
Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-11GRE: enable offloads for GREAmritha Nambiar
To get offloads to work with Generic Routing Encapsulation (GRE), the outer transport header has to be reset after skb_push is done. This patch has the support for this fix and hence GRE offloading. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Joseph Gasparakis <joseph.gasparakis@intel.com> Tested-By: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-11Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-07-10ipv6: fix the check when handle RALi RongQing
d9333196572(ipv6: Allow accepting RA from local IP addresses.) made the wrong check, whether or not to accept RA with source-addr found on local machine, when accept_ra_from_local is 0. Fixes: d9333196572(ipv6: Allow accepting RA from local IP addresses.) Cc: Ben Greear <greearb@candelatech.com> Cc: Hannes Frederic Sowa <hannes@redhat.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10Merge branch 'for-upstream' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2014-07-10Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-07-10bridge: netlink dump interface at par with brctlJamal Hadi Salim
Actually better than brctl showmacs because we can filter by bridge port in the kernel. The current bridge netlink interface doesnt scale when you have many bridges each with large fdbs or even bridges with many bridge ports And now for the science non-fiction novel you have all been waiting for.. //lets see what bridge ports we have root@moja-1:/configs/may30-iprt/bridge# ./bridge link show 8: eth1 state DOWN : <BROADCAST,MULTICAST> mtu 1500 master br0 state disabled priority 32 cost 19 17: sw1-p1 state DOWN : <BROADCAST,NOARP> mtu 1500 master br0 state disabled priority 32 cost 100 // show all.. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show 33:33:00:00:00:01 dev bond0 self permanent 33:33:00:00:00:01 dev dummy0 self permanent 33:33:00:00:00:01 dev ifb0 self permanent 33:33:00:00:00:01 dev ifb1 self permanent 33:33:00:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth0 self permanent 33:33:ff:22:01:01 dev eth0 self permanent 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 33:33:00:00:00:01 dev gretap0 self permanent da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent //filter by bridge root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent // bridge sw1 has no ports attached.. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br sw1 //filter by port root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show brport eth1 02:00:00:12:01:02 vlan 0 master br0 permanent 00:17:42:8a:b4:05 vlan 0 master br0 permanent 00:17:42:8a:b4:07 self permanent 33:33:00:00:00:01 self permanent // filter by port + bridge root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 brport sw1-p1 da:ac:46:27:d9:53 vlan 0 master br0 permanent 33:33:00:00:00:01 self permanent // for shits and giggles (as they say in New Brunswick), lets // change the mac that br0 uses // Note: a magical fdb entry with no brport is added ... root@moja-1:/configs/may30-iprt/bridge# ip link set dev br0 address 02:00:00:12:01:04 // lets see if we can see the unicorn .. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show 33:33:00:00:00:01 dev bond0 self permanent 33:33:00:00:00:01 dev dummy0 self permanent 33:33:00:00:00:01 dev ifb0 self permanent 33:33:00:00:00:01 dev ifb1 self permanent 33:33:00:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth0 self permanent 33:33:ff:22:01:01 dev eth0 self permanent 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 33:33:00:00:00:01 dev gretap0 self permanent 02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent //can we see it if we filter by bridge? root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10bridge: fdb dumping takes a filter deviceJamal Hadi Salim
Dumping a bridge fdb dumps every fdb entry held. With this change we are going to filter on selected bridge port. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-09ipconfig: Only bootp paths should reference ic_dev_xid.David S. Miller
It is only tested, and declared, in the bootp code. So, in ic_dynamic() guard it's setting with IPCONFIG_BOOTP. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-09netlink: Fix handling of error from netlink_dump().Ben Pfaff
netlink_dump() returns a negative errno value on error. Until now, netlink_recvmsg() directly recorded that negative value in sk->sk_err, but that's wrong since sk_err takes positive errno values. (This manifests as userspace receiving a positive return value from the recv() system call, falsely indicating success.) This bug was introduced in the commit that started checking the netlink_dump() return value, commit b44d211 (netlink: handle errors from netlink_dump()). Multithreaded Netlink dumps are one way to trigger this behavior in practice, as described in the commit message for the userspace workaround posted here: http://openvswitch.org/pipermail/dev/2014-June/042339.html This commit also fixes the same bug in netlink_poll(), introduced in commit cd1df525d (netlink: add flow control for memory mapped I/O). Signed-off-by: Ben Pfaff <blp@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-09ipconfig: move ic_dev_xid under IPCONFIG_BOOTPFabian Frederick
ic_dev_xid is only used in __init ic_bootp_recv under IPCONFIG_BOOTP and __init ic_dynamic under IPCONFIG_DYNAMIC(which is itself defined with the same IPCONFIG_BOOTP) This patch fixes the following warning when IPCONFIG_BOOTP is not set: >> net/ipv4/ipconfig.c:146:15: warning: 'ic_dev_xid' defined but not used [-Wunused-variable] static __be32 ic_dev_xid; /* Device under configuration */ Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: netdev@vger.kernel.org Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-09Bluetooth: Don't send ERTM configuration option when disabledMarcel Holtmann
When ERTM support is disabled, then do not even send ERTM configuration option even if the remote side supports it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-09Bluetooth: Fix setting HCI_CONNECTABLE from ioctl codeJohan Hedberg
When the white list is in use the code would not update the HCI_CONNECTABLE flag if it gets changed through the ioctl code (e.g. hciconfig hci0 pscan). Since the flag is important for properly accepting incoming connections add code to fix it up if necessary and emit a New Settings mgmt event. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-09Bluetooth: Add white list lookup for incoming connection requestsJohan Hedberg
This patch adds support for looking up entries in the white list when HCI_CONNECTABLE is not set. The logic is fairly simple: if we're connectable check the black list, if we're not connectable check the white list. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-09Bluetooth: Enable page scan also if there are white list entriesJohan Hedberg
Page scan should be enabled either if the connectable setting is set or if there are any entries in the BR/EDR white list. This patch implements such behavior by updating the two places that were making decisions on whether to enable page scan or not. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-09Bluetooth: Refactor connection request handlingJohan Hedberg
The conditions for accepting an incoming connections are already non-trivial and will become more so once a white list is added. This patch breaks up the checks for when to reject the request by creating a helper function for it. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-09Bluetooth: Fix incorrectly setting HCI_CONNECTABLEJohan Hedberg
Since page scan might be enabled by Add Device we should not implicitly set connectable whenever something else than Set Connectable changes it. This patch makes sure that we don't set HCI_CONNECTABLE for these cases if there are any entries in the white list. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-09Bluetooth: Update page scan when necessary for Add/Remove DeviceJohan Hedberg
When we're removing the last item in the white list or adding the first one to it and HCI_CONNECTABLE is not set we need to update the current page scan. This patch adds a simple helper function for the purpose and calls it from the respective mgmt command handlers. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-09Bluetooth: Introduce a whitelist for BR/EDR devicesJohan Hedberg
This patch extends the Add/Remove device commands by letting user space pass BR/EDR addresses to them. The resulting entries get stored in a new hdev->whitelist list. The idea is that we can now selectively accept connections from devices in the list even though HCI_CONNECTABLE is not set (the actual implementation of this is coming in a subsequent patch). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-09Bluetooth: Unify helpers for bdaddr_list manipulationsJohan Hedberg
We already have several lists with struct bdaddr_list entries, and there will be more in the future. Since the operations for adding, removing, looking up and clearing entries in these lists are exactly the same it doesn't make sense to define new functions for every single list. This patch unifies the functions by passing the list_head to them instead of a hci_dev pointer. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-09Bluetooth: Fix enabling Authenticated Payload Timeout Expired eventMarcel Holtmann
The Authenticated Payload Timeout Expired event is valid for controllers with BR/EDR Secure Connections support, but also for LE only controllers supporting LE Ping feature. When either of them is available enable this event. Previous it was not enabled when the controller was only supporting LE operation. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-08netpoll: fix use after freedavid decotigny
After a bonding master reclaims the netpoll info struct, slaves could still hold a pointer to the reclaimed data. This patch fixes it: as soon as netpoll_async_cleanup is called for a slave (eg. when un-enslaved), we make sure that this slave doesn't point to the data. Signed-off-by: David Decotigny <decot@googlers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08appletalk: Fix socket referencing in skbAndrey Utkin
Setting just skb->sk without taking its reference and setting a destructor is invalid. However, in the places where this was done, skb is used in a way not requiring skb->sk setting. So dropping the setting of skb->sk. Thanks to Eric Dumazet <eric.dumazet@gmail.com> for correct solution. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79441 Reported-by: Ed Martin <edman007@edman007.com> Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08ip_tunnel: fix ip_tunnel_lookupDmitry Popov
This patch fixes 3 similar bugs where incoming packets might be routed into wrong non-wildcard tunnels: 1) Consider the following setup: ip address add 1.1.1.1/24 dev eth0 ip address add 1.1.1.2/24 dev eth0 ip tunnel add ipip1 remote 2.2.2.2 local 1.1.1.1 mode ipip dev eth0 ip link set ipip1 up Incoming ipip packets from 2.2.2.2 were routed into ipip1 even if it has dst = 1.1.1.2. Moreover even if there was wildcard tunnel like ip tunnel add ipip0 remote 2.2.2.2 local any mode ipip dev eth0 but it was created before explicit one (with local 1.1.1.1), incoming ipip packets with src = 2.2.2.2 and dst = 1.1.1.2 were still routed into ipip1. Same issue existed with all tunnels that use ip_tunnel_lookup (gre, vti) 2) ip address add 1.1.1.1/24 dev eth0 ip tunnel add ipip1 remote 2.2.146.85 local 1.1.1.1 mode ipip dev eth0 ip link set ipip1 up Incoming ipip packets with dst = 1.1.1.1 were routed into ipip1, no matter what src address is. Any remote ip address which has ip_tunnel_hash = 0 raised this issue, 2.2.146.85 is just an example, there are more than 4 million of them. And again, wildcard tunnel like ip tunnel add ipip0 remote any local 1.1.1.1 mode ipip dev eth0 wouldn't be ever matched if it was created before explicit tunnel like above. Gre & vti tunnels had the same issue. 3) ip address add 1.1.1.1/24 dev eth0 ip tunnel add gre1 remote 2.2.146.84 local 1.1.1.1 key 1 mode gre dev eth0 ip link set gre1 up Any incoming gre packet with key = 1 were routed into gre1, no matter what src/dst addresses are. Any remote ip address which has ip_tunnel_hash = 0 raised the issue, 2.2.146.84 is just an example, there are more than 4 million of them. Wildcard tunnel like ip tunnel add gre2 remote any local any key 1 mode gre dev eth0 wouldn't be ever matched if it was created before explicit tunnel like above. All this stuff happened because while looking for a wildcard tunnel we didn't check that matched tunnel is a wildcard one. Fixed. Signed-off-by: Dmitry Popov <ixaphire@qrator.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08bridge: export knowledge about the presence of IGMP/MLD queriersLinus Lüssing
With this patch other modules are able to ask the bridge whether an IGMP or MLD querier exists on the according, bridged link layer. Multicast snooping can only be performed if a valid, selected querier exists on a link. Just like the bridge only enables its multicast snooping if a querier exists, e.g. batman-adv too can only activate its multicast snooping in bridged scenarios if a querier is present. For instance this export avoids having to reimplement IGMP/MLD querier message snooping and parsing in e.g. batman-adv, when multicast optimizations for bridged scenarios are added in the future. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08tipc: fix a memleak when sending dataErik Hugne
This fixes a regression bug caused by: 067608e9d019d6477fd45dd948e81af0e5bf599f ("tipc: introduce direct iovec to buffer chain fragmentation function") If data is sent on a nonblocking socket and the destination link is congested, the buffer chain is leaked. We fix this by freeing the chain in this case. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08tipc: fix bug in multicast/broadcast message reassemblyJon Paul Maloy
Since commit 37e22164a8a3c39bdad45aa463b1e69a1fdf4110 ("tipc: rename and move message reassembly function") reassembly of long broadcast messages has been broken. This is because we test for a non-NULL return value of the *buf parameter as criteria for succesful reassembly. However, this parameter is left defined even after reception of the first fragment, when reassebly is still incomplete. This leads to a kernel crash as soon as a the first fragment of a long broadcast message is received. We fix this with this commit, by implementing a stricter behavior of the function and its return values. This commit should be applied to both net and net-next. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net: sctp: Inline the functions from command.cDavid Laight
sctp_init_cmd_seq() and sctp_next_cmd() are only called from one place. The call sequence for sctp_add_cmd_sf() is likely to be longer than the inlined code. With sctp_add_cmd_sf() inlined the compiler can optimise repeated calls. Signed-off-by: David Laight <david.laight@aculab.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08appletalk: fix a coccinella warning in net/appletalk/ddp.cwangweidong
This warning is introduced by commit 7b30600cc6 ("appletalk: fix checkpatch error with indent"), So fix it. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-nextDavid S. Miller
John W. Linville says: ==================== pull request: wireless-next 2014-07-03 Please pull this first batch of wireless updates intended for the 3.17 stream... For the mac80211 bits, Johannes says: "The biggest thing here is probably Arik's TDLS rework, beyond that we have smaller improvements and features like David's scanning IE thing, Luca's queue work, some CSA work, etc. Also your PID rate control removal, of course." For the iwlwifi bits, Emmanuel says: "I have here a whole bunch of various things. Andy contributes better debug prints for dvm specific flows and a module parameter to completely disable power save for dvm. Andrei is sharing the premises of his work on CSA - more to come. Eran and Liad keep on working on the new devices. I have the regular amount of BT Coex stuff and I continue to work on the firmware error report system adding more debug capabilities. More to come on that subject too." On top of that, there are some cleanups to the new rsi driver, some continuing improvements to the rtl818x drivers, and the usual bundles of updates to ath9k, b43, mwifiex, wil6210, and a few other bits here and there. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net: filter: move load_pointer() into filter.hZi Shen Lim
load_pointer() is already a static inline function. Let's move it into filter.h so BPF JIT implementations can reuse this function. Since we're exporting this function, let's also rename it to bpf_load_pointer() for clarity. Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com> Reviewed-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Fix NULL pointer dereference on incomplete hsr_newlink() params.Arvid Brodin
If none of the slave interfaces are specified, struct nlattr *data[] may be NULL. Make sure to check for that. While I'm at it, fix the horrible error messages displayed when only one of the slave interfaces isn't specified. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Better frame dispatchArvid Brodin
This patch removes the separate paths for frames coming from the outside, and frames sent from the HSR device, and instead makes all frames go through hsr_forward_skb() in hsr_forward.c. This greatly improves code readability and also opens up the possibility for future support of the HSR Interlink device that is the basis for HSR RedBoxes and HSR QuadBoxes, as well as VLAN compatibility. Other improvements: * A reduction in the number of times an skb is copied on machines without HAVE_EFFICIENT_UNALIGNED_ACCESS, which improves throughput somewhat. * Headers are now created using the standard eth_header(), and using the standard hard_header_len. * Each HSR slave now gets its own private skb, so slave-specific fields can be correctly set. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Added SET_NETDEV_DEVTYPE and features |= NETIF_F_NETNS_LOCAL to ↵Arvid Brodin
dev_setup. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Implemented .ndo_fix_features (better device features handling).Arvid Brodin
Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Use list_head (and rcu) instead of array for slave devices.Arvid Brodin
Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Move slave init to hsr_slave.c.Arvid Brodin
Also try to prevent some possible slave dereference race conditions. This is finalized in the next patch, which abandons the slave array in favour of a list_head list and list RCU. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Operstate handling cleanup.Arvid Brodin
Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Move to per-hsr device prune timer.Arvid Brodin
Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Switch from dev_add_pack() to netdev_rx_handler_register()Arvid Brodin
Also move the frame receive handler to hsr_slave.c. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 14:19:18 +0000