| Age | Commit message (Collapse) | Author |
|---|
|
tx_queue_len can be set to ~0U, we need to be more
careful about overflows.
__fls(0) is undefined, as this report shows:
UBSAN: shift-out-of-bounds in net/sched/sch_qfq.c:1430:24
shift exponent 51770272 is too large for 32-bit type 'int'
CPU: 0 PID: 25574 Comm: syz-executor.0 Not tainted 5.16.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x201/0x2d8 lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:151 [inline]
__ubsan_handle_shift_out_of_bounds+0x494/0x530 lib/ubsan.c:330
qfq_init_qdisc+0x43f/0x450 net/sched/sch_qfq.c:1430
qdisc_create+0x895/0x1430 net/sched/sch_api.c:1253
tc_modify_qdisc+0x9d9/0x1e20 net/sched/sch_api.c:1660
rtnetlink_rcv_msg+0x934/0xe60 net/core/rtnetlink.c:5571
netlink_rcv_skb+0x200/0x470 net/netlink/af_netlink.c:2496
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x814/0x9f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0xaea/0xe60 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x5b9/0x910 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmsg+0x280/0x370 net/socket.c:2492
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This code used to copy in an unsigned long worth of data before
the sockptr_t conversion, so restore that.
Fixes: a7b75c5a8c41 ("net: pass a sockptr_t into ->setsockopt")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When finding the socket to report an error on, if the invoking packet
is using Segment Routing, the IPv6 destination address is that of an
intermediate router, not the end destination. Extract the ultimate
destination address from the segment address.
This change allows traceroute to function in the presence of Segment
Routing.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RFC8754 says:
ICMP error packets generated within the SR domain are sent to source
nodes within the SR domain. The invoking packet in the ICMP error
message may contain an SRH. Since the destination address of a packet
with an SRH changes as each segment is processed, it may not be the
destination used by the socket or application that generated the
invoking packet.
For the source of an invoking packet to process the ICMP error
message, the ultimate destination address of the IPv6 header may be
required. The following logic is used to determine the destination
address for use by protocol-error handlers.
* Walk all extension headers of the invoking IPv6 packet to the
routing extension header preceding the upper-layer header.
- If routing header is type 4 Segment Routing Header (SRH)
o The SID at Segment List[0] may be used as the destination
address of the invoking packet.
Mangle the skb so the network header points to the invoking packet
inside the ICMP packet. The seg6 helpers can then be used on the skb
to find any segment routing headers. If found, mark this fact in the
IPv6 control block of the skb, and store the offset into the packet of
the SRH. Then restore the skb back to its old state.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An ICMP error message can contain in its message body part of an IPv6
packet which invoked the error. Such a packet might contain a segment
router header. Export get_srh() so the ICMP code can make use of it.
Since his changes the scope of the function from local to global, add
the seg6_ prefix to keep the namespace clean. And move it into seg6.c
so it is always available, not just when IPV6_SEG6_LWTUNNEL is
enabled.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To give drivers the originating device information for optimized
connection tracking offload, fill in act ct extension with
ifindex from skb.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Driver offloading ct tuples can use the information of which devices
received the packets that created the offloaded connections, to
more efficiently offload them only to the relevant device.
Add new act_ct nf conntrack extension, which is used to store the skb
devices before offloading the connection, and then fill in the tuple
iifindex so drivers can get the device via metadata dissector match.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- allow netlink usage in unprivileged containers, by Linus Lüssing
- remove unneeded variable, by Minghao Chi
* tag 'batadv-next-pullrequest-20220103' of git://git.open-mesh.org/linux-merge:
batman-adv: remove unneeded variable in batadv_nc_init
batman-adv: allow netlink usage in unprivileged containers
batman-adv: Start new development cycle
====================
Link: https://lore.kernel.org/r/20220103171722.1126109-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- avoid sending link-local multicast to multicast routers,
by Linus Lüssing
* tag 'batadv-net-pullrequest-20220103' of git://git.open-mesh.org/linux-merge:
batman-adv: mcast: don't send link-local multicast to mcast routers
====================
Link: https://lore.kernel.org/r/20220103171203.1124980-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As Nicolas noted, if gateway validation fails walking the multipath
attribute the code should jump to the cleanup to free previously
allocated memory.
Fixes: 1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route")
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220103170555.94638-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ip6_route_multipath_del loop continues processing the multipath
attribute even if delete of a nexthop path fails. For consistency,
do the same if the gateway attribute is invalid.
Fixes: 1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route")
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220103171911.94739-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need the fixes in here as well for testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add comments for both smc_link_sendable() and smc_link_usable()
to help better distinguish and use them.
No function changes.
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The same fix in commit 5ec7d18d1813 ("sctp: use call_rcu to free endpoint")
is also needed for dumping one asoc and sock after the lookup.
Fixes: 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Removed spaces and added a tab that was causing an error on checkpatch
Signed-off-by: Hamish MacDonald <elusivenode@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add neighbour source flag in mctp_neigh_remove(...) to allow removal of
only static neighbours.
This should be a no-op change and might be useful later when mctp can
have MCTP_NEIGH_DISCOVER neighbours.
Signed-off-by: Gagan Kumar <gagan1kumar.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
v3:
- Report 'backlog' (bytes) instead of 'qlen' (number of packets)
v2:
- Fix sparse warning (use rcu_dereference)
This patch adds support for the queue depth in IOAM trace data fields.
The draft [1] says the following:
The "queue depth" field is a 4-octet unsigned integer field. This
field indicates the current length of the egress interface queue of
the interface from where the packet is forwarded out. The queue
depth is expressed as the current amount of memory buffers used by
the queue (a packet could consume one or more memory buffers,
depending on its size).
An existing function (i.e., qdisc_qstats_qlen_backlog) is used to
retrieve the current queue length without reinventing the wheel.
Note: it was tested and qlen is increasing when an artificial delay is
added on the egress with tc.
[1] https://datatracker.ietf.org/doc/html/draft-ietf-ippm-ioam-data#section-5.4.2.7
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The pointer link is being re-assigned the same value that it was
initialized with in the previous declaration statement. The
re-assignment is redundant and can be removed.
Fixes: 387707fdf486 ("net/smc: convert static link ID to dynamic references")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This implements TCP ULP for SMC, helps applications to replace TCP with
SMC protocol in place. And we use it to implement transparent
replacement.
This replaces original TCP sockets with SMC, reuse TCP as clcsock when
calling setsockopt with TCP_ULP option, and without any overhead.
To replace TCP sockets with SMC, there are two approaches:
- use setsockopt() syscall with TCP_ULP option, if error, it would
fallback to TCP.
- use BPF prog with types BPF_CGROUP_INET_SOCK_CREATE or others to
replace transparently. BPF hooks some points in create socket, bind
and others, users can inject their BPF logics without modifying their
applications, and choose which connections should be replaced with SMC
by calling setsockopt() in BPF prog, based on rules, such as TCP tuples,
PID, cgroup, etc...
BPF doesn't support calling setsockopt with TCP_ULP now, I will send the
patches after this accepted.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This prints net namespace ID, helps us to distinguish different net
namespaces when using tracepoints.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds net namespace ID to the kernel log, net_cookie is unique in
the whole system. It is useful in container environment.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds net namespace ID to diag of linkgroup, helps us to distinguish
different namespaces, and net_cookie is unique in the whole system.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, rdma device supports exclusive net namespace isolation,
however linkgroup doesn't know and support ibdev net namespace.
Applications in the containers don't want to share the nics if we
enabled rdma exclusive mode. Every net namespaces should have their own
linkgroups.
This patch introduce a new field net for linkgroup, which is standing
for the ibdev net namespace in the linkgroup. The net in linkgroup is
initialized with the net namespace of link's ibdev. It compares the net
of linkgroup and sock or ibdev before choose it, if no matched, create
new one in current net namespace. If rdma net namespace exclusive mode
is not enabled, it behaves as before.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The addition of routable multicast TX handling introduced a
bug/regression for packets with a link-local multicast destination:
These packets would be sent to all batman-adv nodes with a multicast
router and to all batman-adv nodes with an old version without multicast
router detection.
This even disregards the batman-adv multicast fanout setting, which can
potentially lead to an unwanted, high number of unicast transmissions or
even congestion.
Fixing this by avoiding to send link-local multicast packets to nodes in
the multicast router list.
Fixes: 11d458c1cb9b ("batman-adv: mcast: apply optimizations for routable packets, too")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
struct tipc_socket_addr.ref has a 4-byte hole,and __tipc_getname() currently
copying it to user space,causing kernel-infoleak.
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] lib/usercopy.c:33
BUG: KMSAN: kernel-infoleak in _copy_to_user+0x1c9/0x270 lib/usercopy.c:33 lib/usercopy.c:33
instrument_copy_to_user include/linux/instrumented.h:121 [inline]
instrument_copy_to_user include/linux/instrumented.h:121 [inline] lib/usercopy.c:33
_copy_to_user+0x1c9/0x270 lib/usercopy.c:33 lib/usercopy.c:33
copy_to_user include/linux/uaccess.h:209 [inline]
copy_to_user include/linux/uaccess.h:209 [inline] net/socket.c:287
move_addr_to_user+0x3f6/0x600 net/socket.c:287 net/socket.c:287
__sys_getpeername+0x470/0x6b0 net/socket.c:1987 net/socket.c:1987
__do_sys_getpeername net/socket.c:1997 [inline]
__se_sys_getpeername net/socket.c:1994 [inline]
__do_sys_getpeername net/socket.c:1997 [inline] net/socket.c:1994
__se_sys_getpeername net/socket.c:1994 [inline] net/socket.c:1994
__x64_sys_getpeername+0xda/0x120 net/socket.c:1994 net/socket.c:1994
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_x64 arch/x86/entry/common.c:51 [inline] arch/x86/entry/common.c:82
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was stored to memory at:
tipc_getname+0x575/0x5e0 net/tipc/socket.c:757 net/tipc/socket.c:757
__sys_getpeername+0x3b3/0x6b0 net/socket.c:1984 net/socket.c:1984
__do_sys_getpeername net/socket.c:1997 [inline]
__se_sys_getpeername net/socket.c:1994 [inline]
__do_sys_getpeername net/socket.c:1997 [inline] net/socket.c:1994
__se_sys_getpeername net/socket.c:1994 [inline] net/socket.c:1994
__x64_sys_getpeername+0xda/0x120 net/socket.c:1994 net/socket.c:1994
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_x64 arch/x86/entry/common.c:51 [inline] arch/x86/entry/common.c:82
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was stored to memory at:
msg_set_word net/tipc/msg.h:212 [inline]
msg_set_destport net/tipc/msg.h:619 [inline]
msg_set_word net/tipc/msg.h:212 [inline] net/tipc/socket.c:1486
msg_set_destport net/tipc/msg.h:619 [inline] net/tipc/socket.c:1486
__tipc_sendmsg+0x44fa/0x5890 net/tipc/socket.c:1486 net/tipc/socket.c:1486
tipc_sendmsg+0xeb/0x140 net/tipc/socket.c:1402 net/tipc/socket.c:1402
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
sock_sendmsg_nosec net/socket.c:704 [inline] net/socket.c:2409
sock_sendmsg net/socket.c:724 [inline] net/socket.c:2409
____sys_sendmsg+0xe11/0x12c0 net/socket.c:2409 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
___sys_sendmsg net/socket.c:2463 [inline] net/socket.c:2492
__sys_sendmsg+0x704/0x840 net/socket.c:2492 net/socket.c:2492
__do_sys_sendmsg net/socket.c:2501 [inline]
__se_sys_sendmsg net/socket.c:2499 [inline]
__do_sys_sendmsg net/socket.c:2501 [inline] net/socket.c:2499
__se_sys_sendmsg net/socket.c:2499 [inline] net/socket.c:2499
__x64_sys_sendmsg+0xe2/0x120 net/socket.c:2499 net/socket.c:2499
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_x64 arch/x86/entry/common.c:51 [inline] arch/x86/entry/common.c:82
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Local variable skaddr created at:
__tipc_sendmsg+0x2d0/0x5890 net/tipc/socket.c:1419 net/tipc/socket.c:1419
tipc_sendmsg+0xeb/0x140 net/tipc/socket.c:1402 net/tipc/socket.c:1402
Bytes 4-7 of 16 are uninitialized
Memory access of size 16 starts at ffff888113753e00
Data copied to user address 0000000020000280
Reported-by: syzbot+cdbd40e0c3ca02cae3b7@syzkaller.appspotmail.com
Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/1640918123-14547-1-git-send-email-tcs.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-12-31
We've added 2 non-merge commits during the last 14 day(s) which contain
a total of 2 files changed, 3 insertions(+), 3 deletions(-).
The main changes are:
1) Revert of an earlier attempt to fix xsk's poll() behavior where it
turned out that the fix for a rare problem made it much worse in
general, from Magnus Karlsson. (Fyi, Magnus mentioned that a proper
fix is coming early next year, so the revert is mainly to avoid
slipping the behavior into 5.16.)
2) Minor misc spell fix in BPF selftests, from Colin Ian King.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Fix spelling mistake "tained" -> "tainted"
Revert "xsk: Do not sleep in poll() when need_wakeup set"
====================
Link: https://lore.kernel.org/r/20211231160050.16105-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-12-30
The following pull-request contains BPF updates for your *net-next* tree.
We've added 72 non-merge commits during the last 20 day(s) which contain
a total of 223 files changed, 3510 insertions(+), 1591 deletions(-).
The main changes are:
1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii.
2) Beautify and de-verbose verifier logs, from Christy.
3) Composable verifier types, from Hao.
4) bpf_strncmp helper, from Hou.
5) bpf.h header dependency cleanup, from Jakub.
6) get_func_[arg|ret|arg_cnt] helpers, from Jiri.
7) Sleepable local storage, from KP.
8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
lwtunnel_valid_encap_type_attr is used to validate encap attributes
within a multipath route. Add length validation checking to the type.
lwtunnel_valid_encap_type_attr is called converting attributes to
fib{6,}_config struct which means it is used before fib_get_nhs,
ip6_route_multipath_add, and ip6_route_multipath_del - other
locations that use rtnh_ok and then nla_get_u16 on RTA_ENCAP_TYPE
attribute.
Fixes: 9ed59592e3e3 ("lwtunnel: fix autoload of lwt modules")
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make sure RTA_GATEWAY for IPv6 multipath route has enough bytes to hold
an IPv6 address.
Fixes: 6b9ea5a64ed5 ("ipv6: fix multipath route replace error recovery")
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit referenced in the Fixes tag used nla_memcpy for RTA_GATEWAY as
does the current nla_get_in6_addr. nla_memcpy protects against accessing
memory greater than what is in the attribute, but there is no check
requiring the attribute to have an IPv6 address. Add it.
Fixes: 51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)")
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make sure RTA_FLOW is at least 4B before using.
Fixes: 4e902c57417c ("[IPv4]: FIB configuration using struct fib_config")
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported uninit-value:
============================================================
BUG: KMSAN: uninit-value in fib_get_nhs+0xac4/0x1f80
net/ipv4/fib_semantics.c:708
fib_get_nhs+0xac4/0x1f80 net/ipv4/fib_semantics.c:708
fib_create_info+0x2411/0x4870 net/ipv4/fib_semantics.c:1453
fib_table_insert+0x45c/0x3a10 net/ipv4/fib_trie.c:1224
inet_rtm_newroute+0x289/0x420 net/ipv4/fib_frontend.c:886
Add helper to validate RTA_GATEWAY length before using the attribute.
Fixes: 4e902c57417c ("[IPv4]: FIB configuration using struct fib_config")
Reported-by: syzbot+d4b9a2851cc3ce998741@syzkaller.appspotmail.com
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
commit 077cdda764c7 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
commit 31108d142f36 ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
commit 4390c6edc0fb ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
https://lore.kernel.org/all/20211229065352.30178-1-saeed@kernel.org/
net/smc/smc_wr.c
commit 49dc9013e34b ("net/smc: Use the bitmap API when applicable")
commit 349d43127dac ("net/smc: fix kernel panic caused by race of smc_sock")
bitmap_zero()/memset() is removed by the fix
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using the bitmap API is less verbose than hand writing them.
It also improves the semantic.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The assignment here will be overwritten, so it should be deleted
The clang_analyzer complains as follows:
net/ethtool/netlink.c:
Value stored to 'ret' is never read
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: luo penghao <luo.penghao@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Other maps like hashmaps are already available to sleepable programs.
Sleepable BPF programs run under trace RCU. Allow task, sk and inode
storage to be used from sleepable programs. This allows sleepable and
non-sleepable programs to provide shareable annotations on kernel
objects.
Sleepable programs run in trace RCU where as non-sleepable programs run
in a normal RCU critical section i.e. __bpf_prog_enter{_sleepable}
and __bpf_prog_exit{_sleepable}) (rcu_read_lock or rcu_read_lock_trace).
In order to make the local storage maps accessible to both sleepable
and non-sleepable programs, one needs to call both
call_rcu_tasks_trace and call_rcu to wait for both trace and classical
RCU grace periods to expire before freeing memory.
Paul's work on call_rcu_tasks_trace allows us to have per CPU queueing
for call_rcu_tasks_trace. This behaviour can be achieved by setting
rcupdate.rcu_task_enqueue_lim=<num_cpus> boot parameter.
In light of these new performance changes and to keep the local storage
code simple, avoid adding a new flag for sleepable maps / local storage
to select the RCU synchronization (trace / classical).
Also, update the dereferencing of the pointers to use
rcu_derference_check (with either the trace or normal RCU locks held)
with a common bpf_rcu_lock_held helper method.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20211224152916.1550677-2-kpsingh@kernel.org
|
|
As we can see from the comment of the nla_put() that it could return
-EMSGSIZE if the tailroom of the skb is insufficient.
Therefore, it should be better to check the return value of the
nla_put_u32 and return the error code if error accurs.
Also, there are many other functions have the same problem, and if this
patch is correct, I will commit a new version to fix all.
Fixes: 955dc68cb9b2 ("net/ncsi: Add generic netlink family")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20211229032118.1706294-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need to first check if the context is a vlan one, then we need to
check the global bridge multicast vlan snooping flag, and finally the
vlan's multicast flag, otherwise we will unnecessarily enable vlan mcast
processing (e.g. querier timers).
Fixes: 7b54aaaf53cb ("net: bridge: multicast: add vlan state initialization and control")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20211228153142.536969-1-nikolay@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A real world panic issue was found as follow in Linux 5.4.
BUG: unable to handle page fault for address: ffffde49a863de28
PGD 7e6fe62067 P4D 7e6fe62067 PUD 7e6fe63067 PMD f51e064067 PTE 0
RIP: 0010:tw_timer_handler+0x20/0x40
Call Trace:
<IRQ>
call_timer_fn+0x2b/0x120
run_timer_softirq+0x1ef/0x450
__do_softirq+0x10d/0x2b8
irq_exit+0xc7/0xd0
smp_apic_timer_interrupt+0x68/0x120
apic_timer_interrupt+0xf/0x20
This issue was also reported since 2017 in the thread [1],
unfortunately, the issue was still can be reproduced after fixing
DCCP.
The ipv4_mib_exit_net is called before tcp_sk_exit_batch when a net
namespace is destroyed since tcp_sk_ops is registered befrore
ipv4_mib_ops, which means tcp_sk_ops is in the front of ipv4_mib_ops
in the list of pernet_list. There will be a use-after-free on
net->mib.net_statistics in tw_timer_handler after ipv4_mib_exit_net
if there are some inflight time-wait timers.
This bug is not introduced by commit f2bf415cfed7 ("mib: add net to
NET_ADD_STATS_BH") since the net_statistics is a global variable
instead of dynamic allocation and freeing. Actually, commit
61a7e26028b9 ("mib: put net statistics on struct net") introduces
the bug since it put net statistics on struct net and free it when
net namespace is destroyed.
Moving init_ipv4_mibs() to the front of tcp_init() to fix this bug
and replace pr_crit() with panic() since continuing is meaningless
when init_ipv4_mibs() fails.
[1] https://groups.google.com/g/syzkaller/c/p1tn-_Kc6l4/m/smuL_FMAAgAJ?pli=1
Fixes: 61a7e26028b9 ("mib: put net statistics on struct net")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Cong Wang <cong.wang@bytedance.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211228104145.9426-1-songmuchun@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Add support for Foxconn MT7922A
- Add support for Realtek RTL8852AE
- Rework HCI event handling to use skb_pull_data
* tag 'for-net-next-2021-12-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (62 commits)
Bluetooth: MGMT: Fix spelling mistake "simultanous" -> "simultaneous"
Bluetooth: vhci: Set HCI_QUIRK_VALID_LE_STATES
Bluetooth: MGMT: Fix LE simultaneous roles UUID if not supported
Bluetooth: hci_sync: Add check simultaneous roles support
Bluetooth: hci_sync: Wait for proper events when connecting LE
Bluetooth: hci_sync: Add support for waiting specific LE subevents
Bluetooth: hci_sync: Add hci_le_create_conn_sync
Bluetooth: hci_event: Use skb_pull_data when processing inquiry results
Bluetooth: hci_sync: Push sync command cancellation to workqueue
Bluetooth: hci_qca: Stop IBS timer during BT OFF
Bluetooth: btusb: Add support for Foxconn MT7922A
Bluetooth: btintel: Add missing quirks and msft ext for legacy bootloader
Bluetooth: btusb: Add two more Bluetooth parts for WCN6855
Bluetooth: L2CAP: Fix using wrong mode
Bluetooth: hci_sync: Fix not always pausing advertising when necessary
Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_CONNECTED
Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_FOUND
Bluetooth: mgmt: Introduce mgmt_alloc_skb and mgmt_send_event_skb
Bluetooth: btusb: Return error code when getting patch status failed
Bluetooth: btusb: Handle download_firmware failure cases
...
====================
Link: https://lore.kernel.org/r/20211229211258.2290966-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As reported[1] if startup query interval is set too low in combination with
large number of startup queries and we have multiple bridges or even a
single bridge with multiple querier vlans configured we can crash the
machine. Add a 1 second minimum which must be enforced by overwriting the
value if set lower (i.e. without returning an error) to avoid breaking
user-space. If that happens a log message is emitted to let the admin know
that the startup interval has been set to the minimum. It doesn't make
sense to make the startup interval lower than the normal query interval
so use the same value of 1 second. The issue has been present since these
intervals could be user-controlled.
[1] https://lore.kernel.org/netdev/e8b9ce41-57b9-b6e2-a46a-ff9c791cf0ba@gmail.com/
Fixes: d902eee43f19 ("bridge: Add multicast count/interval sysfs entries")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As reported[1] if query interval is set too low and we have multiple
bridges or even a single bridge with multiple querier vlans configured
we can crash the machine. Add a 1 second minimum which must be enforced
by overwriting the value if set lower (i.e. without returning an error) to
avoid breaking user-space. If that happens a log message is emitted to let
the administrator know that the interval has been set to the minimum.
The issue has been present since these intervals could be user-controlled.
[1] https://lore.kernel.org/netdev/e8b9ce41-57b9-b6e2-a46a-ff9c791cf0ba@gmail.com/
Fixes: d902eee43f19 ("bridge: Add multicast count/interval sysfs entries")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a check that the user-provided option is at least as long as the
number of bytes we intend to read. Before this patch we would blindly
read sizeof(int) bytes even in cases where the user passed
optlen<sizeof(int), which would potentially read garbage or fault.
Discovered by new tests in https://github.com/google/gvisor/pull/6957 .
The original get_user call predates history in the git repo.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211229200947.2862255-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit initialises the xskb's free_list_node when the xskb is
allocated. This prevents a potential false negative returned from a call
to list_empty for that node, such as the one introduced in commit
199d983bc015 ("xsk: Fix crash on double free in buffer pool")
In my environment this issue caused packets to not be received by
the xdpsock application if the traffic was running prior to application
launch. This happened when the first batch of packets failed the xskmap
lookup and XDP_PASS was returned from the bpf program. This action is
handled in the i40e zc driver (and others) by allocating an skbuff,
freeing the xdp_buff and adding the associated xskb to the
xsk_buff_pool's free_list if it hadn't been added already. Without this
fix, the xskb is not added to the free_list because the check to determine
if it was added already returns an invalid positive result. Later, this
caused allocation errors in the driver and the failure to receive packets.
Fixes: 199d983bc015 ("xsk: Fix crash on double free in buffer pool")
Fixes: 2b43470add8c ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20211220155250.2746-1-ciara.loftus@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sock.h is pretty heavily used (5k objects rebuilt on x86 after
it's touched). We can drop the include of filter.h from it and
add a forward declaration of struct sk_filter instead.
This decreases the number of rebuilt objects when bpf.h
is touched from ~5k to ~1k.
There's a lot of missing includes this was masking. Primarily
in networking tho, this time.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/bpf/20211229004913.513372-1-kuba@kernel.org
|
|
Some NVMEM devices have text based cells. In such cases MAC is stored in
a XX:XX:XX:XX:XX:XX format. Use mac_pton() to parse such data and
support those NVMEM cells. This is required to support e.g. a very
popular U-Boot and its environment variables.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Variable expectlen is being assigned a value that is never read, the
assignment occurs before a return statement. The assignment is
redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A crash occurs when smc_cdc_tx_handler() tries to access smc_sock
but smc_release() has already freed it.
[ 4570.695099] BUG: unable to handle page fault for address: 000000002eae9e88
[ 4570.696048] #PF: supervisor write access in kernel mode
[ 4570.696728] #PF: error_code(0x0002) - not-present page
[ 4570.697401] PGD 0 P4D 0
[ 4570.697716] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 4570.698228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-rc4+ #111
[ 4570.699013] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/0
[ 4570.699933] RIP: 0010:_raw_spin_lock+0x1a/0x30
<...>
[ 4570.711446] Call Trace:
[ 4570.711746] <IRQ>
[ 4570.711992] smc_cdc_tx_handler+0x41/0xc0
[ 4570.712470] smc_wr_tx_tasklet_fn+0x213/0x560
[ 4570.712981] ? smc_cdc_tx_dismisser+0x10/0x10
[ 4570.713489] tasklet_action_common.isra.17+0x66/0x140
[ 4570.714083] __do_softirq+0x123/0x2f4
[ 4570.714521] irq_exit_rcu+0xc4/0xf0
[ 4570.714934] common_interrupt+0xba/0xe0
Though smc_cdc_tx_handler() checked the existence of smc connection,
smc_release() may have already dismissed and released the smc socket
before smc_cdc_tx_handler() further visits it.
smc_cdc_tx_handler() |smc_release()
if (!conn) |
|
|smc_cdc_tx_dismiss_slots()
| smc_cdc_tx_dismisser()
|
|sock_put(&smc->sk) <- last sock_put,
| smc_sock freed
bh_lock_sock(&smc->sk) (panic) |
To make sure we won't receive any CDC messages after we free the
smc_sock, add a refcount on the smc_connection for inflight CDC
message(posted to the QP but haven't received related CQE), and
don't release the smc_connection until all the inflight CDC messages
haven been done, for both success or failed ones.
Using refcount on CDC messages brings another problem: when the link
is going to be destroyed, smcr_link_clear() will reset the QP, which
then remove all the pending CQEs related to the QP in the CQ. To make
sure all the CQEs will always come back so the refcount on the
smc_connection can always reach 0, smc_ib_modify_qp_reset() was replaced
by smc_ib_modify_qp_error().
And remove the timeout in smc_wr_tx_wait_no_pending_sends() since we
need to wait for all pending WQEs done, or we may encounter use-after-
free when handling CQEs.
For IB device removal routine, we need to wait for all the QPs on that
device been destroyed before we can destroy CQs on the device, or
the refcount on smc_connection won't reach 0 and smc_sock cannot be
released.
Fixes: 5f08318f617b ("smc: connection data control (CDC)")
Reported-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We found smc_llc_send_link_delete_all() sometimes wait
for 2s timeout when testing with RDMA link up/down.
It is possible when a smc_link is in ACTIVATING state,
the underlaying QP is still in RESET or RTR state, which
cannot send any messages out.
smc_llc_send_link_delete_all() use smc_link_usable() to
checks whether the link is usable, if the QP is still in
RESET or RTR state, but the smc_link is in ACTIVATING, this
LLC message will always fail without any CQE entering the
CQ, and we will always wait 2s before timeout.
Since we cannot send any messages through the QP before
the QP enter RTS. I add a wrapper smc_link_sendable()
which checks the state of QP along with the link state.
And replace smc_link_usable() with smc_link_sendable()
in all LLC & CDC message sending routine.
Fixes: 5f08318f617b ("smc: connection data control (CDC)")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
$ cat /pro/net/udp
before:
sl local_address rem_address st tx_queue rx_queue tr tm->when
26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000
26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000
27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000
after:
sl local_address rem_address st tx_queue rx_queue tr tm->when
26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000
26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000
27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000
Signed-off-by: yangxingwu <xingwu.yang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
