summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2018-12-21tls: Do not call sk_memcopy_from_iter with zero lengthVakul Garg
In some conditions e.g. when tls_clone_plaintext_msg() returns -ENOSPC, the number of bytes to be copied using subsequent function sk_msg_memcopy_from_iter() becomes zero. This causes function sk_msg_memcopy_from_iter() to fail which in turn causes tls_sw_sendmsg() to return failure. To prevent it, do not call sk_msg_memcopy_from_iter() when number of bytes to copy (indicated by 'try_to_copy') is zero. Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface") Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21net: minor cleanup in skb_ext_add()Paolo Abeni
When the extension to be added is already present, the only skb field we may need to update is 'extensions': we can reorder the code and avoid a branch. v1 -> v2: - be sure to flag the newly added extension as active Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21net: fix possible user-after-free in skb_ext_add()Paolo Abeni
On cow we can free the old extension: we must avoid dereferencing such extension after skb_ext_maybe_cow(). Since 'new' contents are always equal to 'old' after the copy, we can fix the above accessing the relevant data using 'new'. Fixes: df5042f4c5b9 ("sk_buff: add skb extension infrastructure") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21ipv6: tunnels: fix two use-after-freeEric Dumazet
xfrm6_policy_check() might have re-allocated skb->head, we need to reload ipv6 header pointer. sysbot reported : BUG: KASAN: use-after-free in __ipv6_addr_type+0x302/0x32f net/ipv6/addrconf_core.c:40 Read of size 4 at addr ffff888191b8cb70 by task syz-executor2/1304 CPU: 0 PID: 1304 Comm: syz-executor2 Not tainted 4.20.0-rc7+ #356 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x39d lib/dump_stack.c:113 print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:432 __ipv6_addr_type+0x302/0x32f net/ipv6/addrconf_core.c:40 ipv6_addr_type include/net/ipv6.h:403 [inline] ip6_tnl_get_cap+0x27/0x190 net/ipv6/ip6_tunnel.c:727 ip6_tnl_rcv_ctl+0xdb/0x2a0 net/ipv6/ip6_tunnel.c:757 vti6_rcv+0x336/0x8f3 net/ipv6/ip6_vti.c:321 xfrm6_ipcomp_rcv+0x1a5/0x3a0 net/ipv6/xfrm6_protocol.c:132 ip6_protocol_deliver_rcu+0x372/0x1940 net/ipv6/ip6_input.c:394 ip6_input_finish+0x84/0x170 net/ipv6/ip6_input.c:434 NF_HOOK include/linux/netfilter.h:289 [inline] ip6_input+0xe9/0x600 net/ipv6/ip6_input.c:443 IPVS: ftp: loaded support on port[0] = 21 ip6_mc_input+0x514/0x11c0 net/ipv6/ip6_input.c:537 dst_input include/net/dst.h:450 [inline] ip6_rcv_finish+0x17a/0x330 net/ipv6/ip6_input.c:76 NF_HOOK include/linux/netfilter.h:289 [inline] ipv6_rcv+0x115/0x640 net/ipv6/ip6_input.c:272 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4973 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5083 process_backlog+0x24e/0x7a0 net/core/dev.c:5923 napi_poll net/core/dev.c:6346 [inline] net_rx_action+0x7fa/0x19b0 net/core/dev.c:6412 __do_softirq+0x308/0xb7e kernel/softirq.c:292 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1027 </IRQ> do_softirq.part.14+0x126/0x160 kernel/softirq.c:337 do_softirq+0x19/0x20 kernel/softirq.c:340 netif_rx_ni+0x521/0x860 net/core/dev.c:4569 dev_loopback_xmit+0x287/0x8c0 net/core/dev.c:3576 NF_HOOK include/linux/netfilter.h:289 [inline] ip6_finish_output2+0x193a/0x2930 net/ipv6/ip6_output.c:84 ip6_fragment+0x2b06/0x3850 net/ipv6/ip6_output.c:727 ip6_finish_output+0x6b7/0xc50 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip6_output+0x232/0x9d0 net/ipv6/ip6_output.c:171 dst_output include/net/dst.h:444 [inline] ip6_local_out+0xc5/0x1b0 net/ipv6/output_core.c:176 ip6_send_skb+0xbc/0x340 net/ipv6/ip6_output.c:1727 ip6_push_pending_frames+0xc5/0xf0 net/ipv6/ip6_output.c:1747 rawv6_push_pending_frames net/ipv6/raw.c:615 [inline] rawv6_sendmsg+0x3a3e/0x4b40 net/ipv6/raw.c:945 kobject: 'queues' (0000000089e6eea2): kobject_add_internal: parent: 'tunl0', set: '<NULL>' kobject: 'queues' (0000000089e6eea2): kobject_uevent_env inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798 kobject: 'queues' (0000000089e6eea2): kobject_uevent_env: filter function caused the event to drop! sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:631 sock_write_iter+0x35e/0x5c0 net/socket.c:900 call_write_iter include/linux/fs.h:1857 [inline] new_sync_write fs/read_write.c:474 [inline] __vfs_write+0x6b8/0x9f0 fs/read_write.c:487 kobject: 'rx-0' (00000000e2d902d9): kobject_add_internal: parent: 'queues', set: 'queues' kobject: 'rx-0' (00000000e2d902d9): kobject_uevent_env vfs_write+0x1fc/0x560 fs/read_write.c:549 ksys_write+0x101/0x260 fs/read_write.c:598 kobject: 'rx-0' (00000000e2d902d9): fill_kobj_path: path = '/devices/virtual/net/tunl0/queues/rx-0' __do_sys_write fs/read_write.c:610 [inline] __se_sys_write fs/read_write.c:607 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:607 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 kobject: 'tx-0' (00000000443b70ac): kobject_add_internal: parent: 'queues', set: 'queues' entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457669 Code: fd b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f9bd200bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457669 RDX: 000000000000058f RSI: 00000000200033c0 RDI: 0000000000000003 kobject: 'tx-0' (00000000443b70ac): kobject_uevent_env RBP: 000000000072bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9bd200c6d4 R13: 00000000004c2dcc R14: 00000000004da398 R15: 00000000ffffffff Allocated by task 1304: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553 __do_kmalloc_node mm/slab.c:3684 [inline] __kmalloc_node_track_caller+0x50/0x70 mm/slab.c:3698 __kmalloc_reserve.isra.41+0x41/0xe0 net/core/skbuff.c:140 __alloc_skb+0x155/0x760 net/core/skbuff.c:208 kobject: 'tx-0' (00000000443b70ac): fill_kobj_path: path = '/devices/virtual/net/tunl0/queues/tx-0' alloc_skb include/linux/skbuff.h:1011 [inline] __ip6_append_data.isra.49+0x2f1a/0x3f50 net/ipv6/ip6_output.c:1450 ip6_append_data+0x1bc/0x2d0 net/ipv6/ip6_output.c:1619 rawv6_sendmsg+0x15ab/0x4b40 net/ipv6/raw.c:938 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:631 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2116 __sys_sendmsg+0x11d/0x280 net/socket.c:2154 __do_sys_sendmsg net/socket.c:2163 [inline] __se_sys_sendmsg net/socket.c:2161 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2161 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe kobject: 'gre0' (00000000cb1b2d7b): kobject_add_internal: parent: 'net', set: 'devices' Freed by task 1304: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kfree+0xcf/0x230 mm/slab.c:3817 skb_free_head+0x93/0xb0 net/core/skbuff.c:553 pskb_expand_head+0x3b2/0x10d0 net/core/skbuff.c:1498 __pskb_pull_tail+0x156/0x18a0 net/core/skbuff.c:1896 pskb_may_pull include/linux/skbuff.h:2188 [inline] _decode_session6+0xd11/0x14d0 net/ipv6/xfrm6_policy.c:150 __xfrm_decode_session+0x71/0x140 net/xfrm/xfrm_policy.c:3272 kobject: 'gre0' (00000000cb1b2d7b): kobject_uevent_env __xfrm_policy_check+0x380/0x2c40 net/xfrm/xfrm_policy.c:3322 __xfrm_policy_check2 include/net/xfrm.h:1170 [inline] xfrm_policy_check include/net/xfrm.h:1175 [inline] xfrm6_policy_check include/net/xfrm.h:1185 [inline] vti6_rcv+0x4bd/0x8f3 net/ipv6/ip6_vti.c:316 xfrm6_ipcomp_rcv+0x1a5/0x3a0 net/ipv6/xfrm6_protocol.c:132 ip6_protocol_deliver_rcu+0x372/0x1940 net/ipv6/ip6_input.c:394 ip6_input_finish+0x84/0x170 net/ipv6/ip6_input.c:434 NF_HOOK include/linux/netfilter.h:289 [inline] ip6_input+0xe9/0x600 net/ipv6/ip6_input.c:443 ip6_mc_input+0x514/0x11c0 net/ipv6/ip6_input.c:537 dst_input include/net/dst.h:450 [inline] ip6_rcv_finish+0x17a/0x330 net/ipv6/ip6_input.c:76 NF_HOOK include/linux/netfilter.h:289 [inline] ipv6_rcv+0x115/0x640 net/ipv6/ip6_input.c:272 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4973 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5083 process_backlog+0x24e/0x7a0 net/core/dev.c:5923 kobject: 'gre0' (00000000cb1b2d7b): fill_kobj_path: path = '/devices/virtual/net/gre0' napi_poll net/core/dev.c:6346 [inline] net_rx_action+0x7fa/0x19b0 net/core/dev.c:6412 __do_softirq+0x308/0xb7e kernel/softirq.c:292 The buggy address belongs to the object at ffff888191b8cac0 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 176 bytes inside of 512-byte region [ffff888191b8cac0, ffff888191b8ccc0) The buggy address belongs to the page: page:ffffea000646e300 count:1 mapcount:0 mapping:ffff8881da800940 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 ffffea0006eaaa48 ffffea00065356c8 ffff8881da800940 raw: 0000000000000000 ffff888191b8c0c0 0000000100000006 0000000000000000 page dumped because: kasan: bad access detected kobject: 'queues' (000000005fd6226e): kobject_add_internal: parent: 'gre0', set: '<NULL>' Memory state around the buggy address: ffff888191b8ca00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888191b8ca80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb >ffff888191b8cb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888191b8cb80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888191b8cc00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 0d3c703a9d17 ("ipv6: Cleanup IPv6 tunnel receive path") Fixes: ed1efb2aefbb ("ipv6: Add support for IPsec virtual tunnel interfaces") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21Prevent overflow of sk_msg in sk_msg_clone()Vakul Garg
Fixed function sk_msg_clone() to prevent overflow of 'dst' while adding pages in scatterlist entries. The overflow of 'dst' causes crash in kernel tls module while doing record encryption. Crash fixed by this patch. [ 78.796119] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 78.804900] Mem abort info: [ 78.807683] ESR = 0x96000004 [ 78.810744] Exception class = DABT (current EL), IL = 32 bits [ 78.816677] SET = 0, FnV = 0 [ 78.819727] EA = 0, S1PTW = 0 [ 78.822873] Data abort info: [ 78.825759] ISV = 0, ISS = 0x00000004 [ 78.829600] CM = 0, WnR = 0 [ 78.832576] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000bf8ee311 [ 78.839195] [0000000000000008] pgd=0000000000000000 [ 78.844081] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 78.849642] Modules linked in: tls xt_conntrack ipt_REJECT nf_reject_ipv4 ip6table_filter ip6_tables xt_CHECKSUM cpve cpufreq_conservative lm90 ina2xx crct10dif_ce [ 78.865377] CPU: 0 PID: 6007 Comm: openssl Not tainted 4.20.0-rc6-01647-g754d5da63145-dirty #107 [ 78.874149] Hardware name: LS1043A RDB Board (DT) [ 78.878844] pstate: 60000005 (nZCv daif -PAN -UAO) [ 78.883632] pc : scatterwalk_copychunks+0x164/0x1c8 [ 78.888500] lr : scatterwalk_copychunks+0x160/0x1c8 [ 78.893366] sp : ffff00001d04b600 [ 78.896668] x29: ffff00001d04b600 x28: ffff80006814c680 [ 78.901970] x27: 0000000000000000 x26: ffff80006c8de786 [ 78.907272] x25: ffff00001d04b760 x24: 000000000000001a [ 78.912573] x23: 0000000000000006 x22: ffff80006814e440 [ 78.917874] x21: 0000000000000100 x20: 0000000000000000 [ 78.923175] x19: 000081ffffffffff x18: 0000000000000400 [ 78.928476] x17: 0000000000000008 x16: 0000000000000000 [ 78.933778] x15: 0000000000000100 x14: 0000000000000001 [ 78.939079] x13: 0000000000001080 x12: 0000000000000020 [ 78.944381] x11: 0000000000001080 x10: 00000000ffff0002 [ 78.949683] x9 : ffff80006814c248 x8 : 00000000ffff0000 [ 78.954985] x7 : ffff80006814c318 x6 : ffff80006c8de786 [ 78.960286] x5 : 0000000000000f80 x4 : ffff80006c8de000 [ 78.965588] x3 : 0000000000000000 x2 : 0000000000001086 [ 78.970889] x1 : ffff7e0001b74e02 x0 : 0000000000000000 [ 78.976192] Process openssl (pid: 6007, stack limit = 0x00000000291367f9) [ 78.982968] Call trace: [ 78.985406] scatterwalk_copychunks+0x164/0x1c8 [ 78.989927] skcipher_walk_next+0x28c/0x448 [ 78.994099] skcipher_walk_done+0xfc/0x258 [ 78.998187] gcm_encrypt+0x434/0x4c0 [ 79.001758] tls_push_record+0x354/0xa58 [tls] [ 79.006194] bpf_exec_tx_verdict+0x1e4/0x3e8 [tls] [ 79.010978] tls_sw_sendmsg+0x650/0x780 [tls] [ 79.015326] inet_sendmsg+0x2c/0xf8 [ 79.018806] sock_sendmsg+0x18/0x30 [ 79.022284] __sys_sendto+0x104/0x138 [ 79.025935] __arm64_sys_sendto+0x24/0x30 [ 79.029936] el0_svc_common+0x60/0xe8 [ 79.033588] el0_svc_handler+0x2c/0x80 [ 79.037327] el0_svc+0x8/0xc [ 79.040200] Code: 6b01005f 54fff788 940169b1 f9000320 (b9400801) [ 79.046283] ---[ end trace 74db007d069c1cf7 ]--- Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface") Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21packet: validate address lengthWillem de Bruijn
Packet sockets with SOCK_DGRAM may pass an address for use in dev_hard_header. Ensure that it is of sufficient length. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20tcp: fix a race in inet_diag_dump_icsk()Eric Dumazet
Alexei reported use after frees in inet_diag_dump_icsk() [1] Because we use refcount_set() when various sockets are setup and inserted into ehash, we also need to make sure inet_diag_dump_icsk() wont race with the refcount_set() operations. Jonathan Lemon sent a patch changing net_twsk_hashdance() but other spots would need risky changes. Instead, fix inet_diag_dump_icsk() as this bug came with linux-4.10 only. [1] Quoting Alexei : First something iterating over sockets finds already freed tw socket: refcount_t: increment on 0; use-after-free. WARNING: CPU: 2 PID: 2738 at lib/refcount.c:153 refcount_inc+0x26/0x30 RIP: 0010:refcount_inc+0x26/0x30 RSP: 0018:ffffc90004c8fbc0 EFLAGS: 00010282 RAX: 000000000000002b RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88085ee9d680 RSI: ffff88085ee954c8 RDI: ffff88085ee954c8 RBP: ffff88010ecbd2c0 R08: 0000000000000000 R09: 000000000000174c R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8806ba9bf210 R14: ffffffff82304600 R15: ffff88010ecbd328 FS: 00007f81f5a7d700(0000) GS:ffff88085ee80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f81e2a95000 CR3: 000000069b2eb006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: inet_diag_dump_icsk+0x2b3/0x4e0 [inet_diag] // sock_hold(sk); in net/ipv4/inet_diag.c:1002 ? kmalloc_large_node+0x37/0x70 ? __kmalloc_node_track_caller+0x1cb/0x260 ? __alloc_skb+0x72/0x1b0 ? __kmalloc_reserve.isra.40+0x2e/0x80 __inet_diag_dump+0x3b/0x80 [inet_diag] netlink_dump+0x116/0x2a0 netlink_recvmsg+0x205/0x3c0 sock_read_iter+0x89/0xd0 __vfs_read+0xf7/0x140 vfs_read+0x8a/0x140 SyS_read+0x3f/0xa0 do_syscall_64+0x5a/0x100 then a minute later twsk timer fires and hits two bad refcnts for this freed socket: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 31 PID: 0 at lib/refcount.c:228 refcount_dec+0x2e/0x40 Modules linked in: RIP: 0010:refcount_dec+0x2e/0x40 RSP: 0018:ffff88085f5c3ea8 EFLAGS: 00010296 RAX: 000000000000002c RBX: ffff88010ecbd2c0 RCX: 000000000000083f RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000003f RBP: ffffc90003c77280 R08: 0000000000000000 R09: 00000000000017d3 R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: ffffffff82ad2d80 R13: ffffffff8182de00 R14: ffff88085f5c3ef8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fbe42685250 CR3: 0000000002209001 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> inet_twsk_kill+0x9d/0xc0 // inet_twsk_bind_unhash(tw, hashinfo); call_timer_fn+0x29/0x110 run_timer_softirq+0x36b/0x3a0 refcount_t: underflow; use-after-free. WARNING: CPU: 31 PID: 0 at lib/refcount.c:187 refcount_sub_and_test+0x46/0x50 RIP: 0010:refcount_sub_and_test+0x46/0x50 RSP: 0018:ffff88085f5c3eb8 EFLAGS: 00010296 RAX: 0000000000000026 RBX: ffff88010ecbd2c0 RCX: 000000000000083f RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000003f RBP: ffff88010ecbd358 R08: 0000000000000000 R09: 000000000000185b R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: ffff88010ecbd358 R13: ffffffff8182de00 R14: ffff88085f5c3ef8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fbe42685250 CR3: 0000000002209001 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> inet_twsk_put+0x12/0x20 // inet_twsk_put(tw); call_timer_fn+0x29/0x110 run_timer_softirq+0x36b/0x3a0 Fixes: 67db3e4bfbc9 ("tcp: no longer hold ehash lock while calling tcp_get_info()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Alexei Starovoitov <ast@kernel.org> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Support for destination MAC in ipset, from Stefano Brivio. 2) Disallow all-zeroes MAC address in ipset, also from Stefano. 3) Add IPSET_CMD_GET_BYNAME and IPSET_CMD_GET_BYINDEX commands, introduce protocol version number 7, from Jozsef Kadlecsik. A follow up patch to fix ip_set_byindex() is also included in this batch. 4) Honor CTA_MARK_MASK from ctnetlink, from Andreas Jaggi. 5) Statify nf_flow_table_iterate(), from Taehee Yoo. 6) Use nf_flow_table_iterate() to simplify garbage collection in nf_flow_table logic, also from Taehee Yoo. 7) Don't use _bh variants of call_rcu(), rcu_barrier() and synchronize_rcu_bh() in Netfilter, from Paul E. McKenney. 8) Remove NFC_* cache definition from the old caching infrastructure. 9) Remove layer 4 port rover in NAT helpers, use random port instead, from Florian Westphal. 10) Use strscpy() in ipset, from Qian Cai. 11) Remove NF_NAT_RANGE_PROTO_RANDOM_FULLY branch now that random port is allocated by default, from Xiaozhou Liu. 12) Ignore NF_NAT_RANGE_PROTO_RANDOM too, from Florian Westphal. 13) Limit port allocation selection routine in NAT to avoid softlockup splats when most ports are in use, from Florian. 14) Remove unused parameters in nf_ct_l4proto_unregister_sysctl() from Yafang Shao. 15) Direct call to nf_nat_l4proto_unique_tuple() instead of indirection, from Florian Westphal. 16) Several patches to remove all layer 4 NAT indirections, remove nf_nat_l4proto struct, from Florian Westphal. 17) Fix RTP/RTCP source port translation when SNAT is in place, from Alin Nastac. 18) Selective rule dump per chain, from Phil Sutter. 19) Revisit CLUSTERIP target, this includes a deadlock fix from netns path, sleep in atomic, remove bogus WARN_ON_ONCE() and disallow mismatching IP address and MAC address. Patchset from Taehee Yoo. 20) Update UDP timeout to stream after 2 seconds, from Florian. 21) Shrink UDP established timeout to 120 seconds like TCP timewait. 22) Sysctl knobs to set GRE timeouts, from Yafang Shao. 23) Move seq_print_acct() to conntrack core file, from Florian. 24) Add enum for conntrack sysctl knobs, also from Florian. 25) Place nf_conntrack_acct, nf_conntrack_helper, nf_conntrack_events and nf_conntrack_timestamp knobs in the core, from Florian Westphal. As a side effect, shrink netns_ct structure by removing obsolete sysctl anchors, also from Florian. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-12-21 The following pull-request contains BPF updates for your *net-next* tree. There is a merge conflict in test_verifier.c. Result looks as follows: [...] }, { "calls: cross frame pruning", .insns = { [...] .prog_type = BPF_PROG_TYPE_SOCKET_FILTER, .errstr_unpriv = "function calls to other bpf functions are allowed for root only", .result_unpriv = REJECT, .errstr = "!read_ok", .result = REJECT, }, { "jset: functional", .insns = { [...] { "jset: unknown const compare not taken", .insns = { BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_get_prandom_u32), BPF_JMP_IMM(BPF_JSET, BPF_REG_0, 1, 1), BPF_LDX_MEM(BPF_B, BPF_REG_8, BPF_REG_9, 0), BPF_EXIT_INSN(), }, .prog_type = BPF_PROG_TYPE_SOCKET_FILTER, .errstr_unpriv = "!read_ok", .result_unpriv = REJECT, .errstr = "!read_ok", .result = REJECT, }, [...] { "jset: range", .insns = { [...] }, .prog_type = BPF_PROG_TYPE_SOCKET_FILTER, .result_unpriv = ACCEPT, .result = ACCEPT, }, The main changes are: 1) Various BTF related improvements in order to get line info working. Meaning, verifier will now annotate the corresponding BPF C code to the error log, from Martin and Yonghong. 2) Implement support for raw BPF tracepoints in modules, from Matt. 3) Add several improvements to verifier state logic, namely speeding up stacksafe check, optimizations for stack state equivalence test and safety checks for liveness analysis, from Alexei. 4) Teach verifier to make use of BPF_JSET instruction, add several test cases to kselftests and remove nfp specific JSET optimization now that verifier has awareness, from Jakub. 5) Improve BPF verifier's slot_type marking logic in order to allow more stack slot sharing, from Jiong. 6) Add sk_msg->size member for context access and add set of fixes and improvements to make sock_map with kTLS usable with openssl based applications, from John. 7) Several cleanups and documentation updates in bpftool as well as auto-mount of tracefs for "bpftool prog tracelog" command, from Quentin. 8) Include sub-program tags from now on in bpf_prog_info in order to have a reliable way for user space to get all tags of the program e.g. needed for kallsyms correlation, from Song. 9) Add BTF annotations for cgroup_local_storage BPF maps and implement bpf fs pretty print support, from Roman. 10) Fix bpftool in order to allow for cross-compilation, from Ivan. 11) Update of bpftool license to GPLv2-only + BSD-2-Clause in order to be compatible with libbfd and allow for Debian packaging, from Jakub. 12) Remove an obsolete prog->aux sanitation in dump and get rid of version check for prog load, from Daniel. 13) Fix a memory leak in libbpf's line info handling, from Prashant. 14) Fix cpumap's frame alignment for build_skb() so that skb_shared_info does not get unaligned, from Jesper. 15) Fix test_progs kselftest to work with older compilers which are less smart in optimizing (and thus throwing build error), from Stanislav. 16) Cleanup and simplify AF_XDP socket teardown, from Björn. 17) Fix sk lookup in BPF kselftest's test_sock_addr with regards to netns_id argument, from Andrey. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20ppp: Move PFC decompression to PPP generic layerSam Protsenko
Extract "Protocol" field decompression code from transport protocols to PPP generic layer, where it actually belongs. As a consequence, this patch fixes incorrect place of PFC decompression in L2TP driver (when it's not PPPOX_BOUND) and also enables this decompression for other protocols, like PPPoE. Protocol field decompression also happens in PPP Multilink Protocol code and in PPP compression protocols implementations (bsd, deflate, mppe). It looks like there is no easy way to get rid of that, so it was decided to leave it as is, but provide those cases with appropriate comments instead. Changes in v2: - Fix the order of checking skb data room and proto decompression - Remove "inline" keyword from ppp_decompress_proto() - Don't split line before function name - Prefix ppp_decompress_proto() function with "__" - Add ppp_decompress_proto() function with skb data room checks - Add description for introduced functions - Fix comments (as per review on mailing list) Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20net: ipv4: Set skb->dev for output route resolutionIdo Schimmel
When user requests to resolve an output route, the kernel synthesizes an skb where the relevant parameters (e.g., source address) are set. The skb is then passed to ip_route_output_key_hash_rcu() which might call into the flow dissector in case a multipath route was hit and a nexthop needs to be selected based on the multipath hash. Since both 'skb->dev' and 'skb->sk' are not set, a warning is triggered in the flow dissector [1]. The warning is there to prevent codepaths from silently falling back to the standard flow dissector instead of the BPF one. Therefore, instead of removing the warning, set 'skb->dev' to the loopback device, as its not used for anything but resolving the correct namespace. [1] WARNING: CPU: 1 PID: 24819 at net/core/flow_dissector.c:764 __skb_flow_dissect+0x314/0x16b0 ... RSP: 0018:ffffa0df41fdf650 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8bcded232000 RCX: 0000000000000000 RDX: ffffa0df41fdf7e0 RSI: ffffffff98e415a0 RDI: ffff8bcded232000 RBP: ffffa0df41fdf760 R08: 0000000000000000 R09: 0000000000000000 R10: ffffa0df41fdf7e8 R11: ffff8bcdf27a3000 R12: ffffffff98e415a0 R13: ffffa0df41fdf7e0 R14: ffffffff98dd2980 R15: ffffa0df41fdf7e0 FS: 00007f46f6897680(0000) GS:ffff8bcdf7a80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055933e95f9a0 CR3: 000000021e636000 CR4: 00000000001006e0 Call Trace: fib_multipath_hash+0x28c/0x2d0 ? fib_multipath_hash+0x28c/0x2d0 fib_select_path+0x241/0x32f ? __fib_lookup+0x6a/0xb0 ip_route_output_key_hash_rcu+0x650/0xa30 ? __alloc_skb+0x9b/0x1d0 inet_rtm_getroute+0x3f7/0xb80 ? __alloc_pages_nodemask+0x11c/0x2c0 rtnetlink_rcv_msg+0x1d9/0x2f0 ? rtnl_calcit.isra.24+0x120/0x120 netlink_rcv_skb+0x54/0x130 rtnetlink_rcv+0x15/0x20 netlink_unicast+0x20a/0x2c0 netlink_sendmsg+0x2d1/0x3d0 sock_sendmsg+0x39/0x50 ___sys_sendmsg+0x2a0/0x2f0 ? filemap_map_pages+0x16b/0x360 ? __handle_mm_fault+0x108e/0x13d0 __sys_sendmsg+0x63/0xa0 ? __sys_sendmsg+0x63/0xa0 __x64_sys_sendmsg+0x1f/0x30 do_syscall_64+0x5a/0x120 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: d0e13a1488ad ("flow_dissector: lookup netns by skb->sk if skb->dev is NULL") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20neighbour: remove stray semicolonColin Ian King
Currently the stray semicolon means that the final term in the addition is being missed. Fix this by removing it. Cleans up clang warning: net/core/neighbour.c:2821:9: warning: expression result unused [-Wunused-value] Fixes: 82cbb5c631a0 ("neighbour: register rtnl doit handler") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-By: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20ipv6: frags: Fix bogus skb->sk in reassembled packetsHerbert Xu
It was reported that IPsec would crash when it encounters an IPv6 reassembled packet because skb->sk is non-zero and not a valid pointer. This is because skb->sk is now a union with ip_defrag_offset. This patch fixes this by resetting skb->sk when exiting from the reassembly code. Reported-by: Xiumei Mu <xmu@redhat.com> Fixes: 219badfaade9 ("ipv6: frags: get rid of ip6frag_skb_cb/...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21netfilter: conntrack: remove empty pernet fini stubsFlorian Westphal
after moving sysctl handling into single place, the init functions can't fail anymore and some of the fini functions are empty. Remove them and change return type to void. This also simplifies error unwinding in conntrack module init path. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-21netfilter: conntrack: merge ecache and timestamp sysctl tables with main oneFlorian Westphal
Similar to previous change, this time for eache and timestamp. Unlike helper and acct, these can be disabled at build time, so they need ifdef guards. Next patch will remove a few (now obsolete) functions. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-21netfilter: conntrack: merge acct and helper sysctl table with main oneFlorian Westphal
Needless copy&paste, just handle all in one. Next patch will handle acct and timestamp, which have similar functions. Intentionally leaves cruft behind, will be cleaned up in a followup patch. The obsolete sysctl pointers in netns_ct struct are left in place and removed in a single change, as changes to netns trigger rebuild of almost all files. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-21netfilter: conntrack: add mnemonics for sysctl tableFlorian Westphal
Its a bit hard to see what table[3] really lines up with, so add human-readable mnemonics and use them for initialisation. This makes it easier to see e.g. which sysctls are not exported to unprivileged userns. objdiff shows no changes. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-21netfilter: conntrack: un-export seq_print_acctFlorian Westphal
Only one caller, just place it where its needed. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-21netfilter: conntrack: register sysctl table for greYafang Shao
This patch adds two sysctl knobs for GRE: net.netfilter.nf_conntrack_gre_timeout = 30 net.netfilter.nf_conntrack_gre_timeout_stream = 180 Update the Documentation as well. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-21netfilter: conntrack: udp: set stream timeout to 2 minutesFlorian Westphal
We have no explicit signal when a UDP stream has terminated, peers just stop sending. For suspected stream connections a timeout of two minutes is sane to keep NAT mapping alive a while longer. It matches tcp conntracks 'timewait' default timeout value. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-21netfilter: conntrack: udp: only extend timeout to stream mode after 2sFlorian Westphal
Currently DNS resolvers that send both A and AAAA queries from same source port can trigger stream mode prematurely, which results in non-early-evictable conntrack entry for three minutes, even though DNS requests are done in a few milliseconds. Add a two second grace period where we continue to use the ordinary 30-second default timeout. Its enough for DNS request/response traffic, even if two request/reply packets are involved. ASSURED is still set, else conntrack (and thus a possible NAT mapping ...) gets zapped too in case conntrack table runs full. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-20bpf: tls_sw, init TLS ULP removes BPF proto hooksJohn Fastabend
The existing code did not expect users would initialize the TLS ULP without subsequently calling the TLS TX enabling socket option. If the application tries to send data after the TLS ULP enable op but before the TLS TX enable op the BPF sk_msg verdict program is skipped. This patch resolves this by converting the ipv4 sock ops to be calculated at init time the same way ipv6 ops are done. This pulls in any changes to the sock ops structure that have been made after the socket was created including the changes from adding the socket to a sock{map|hash}. This was discovered by running OpenSSL master branch which calls the TLS ULP setsockopt early in TLS handshake but only enables the TLS TX path once the handshake has completed. As a result the datapath missed the initial handshake messages. Fixes: 02c558b2d5d6 ("bpf: sockmap, support for msg_peek in sk_msg with redirect ingress") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-20bpf: sk_msg, sock{map|hash} redirect through ULPJohn Fastabend
A sockmap program that redirects through a kTLS ULP enabled socket will not work correctly because the ULP layer is skipped. This fixes the behavior to call through the ULP layer on redirect to ensure any operations required on the data stream at the ULP layer continue to be applied. To do this we add an internal flag MSG_SENDPAGE_NOPOLICY to avoid calling the BPF layer on a redirected message. This is required to avoid calling the BPF layer multiple times (possibly recursively) which is not the current/expected behavior without ULPs. In the future we may add a redirect flag if users _do_ want the policy applied again but this would need to work for both ULP and non-ULP sockets and be opt-in to avoid breaking existing programs. Also to avoid polluting the flag space with an internal flag we reuse the flag space overlapping MSG_SENDPAGE_NOPOLICY with MSG_WAITFORONE. Here WAITFORONE is specific to recv path and SENDPAGE_NOPOLICY is only used for sendpage hooks. The last thing to verify is user space API is masked correctly to ensure the flag can not be set by user. (Note this needs to be true regardless because we have internal flags already in-use that user space should not be able to set). But for completeness we have two UAPI paths into sendpage, sendfile and splice. In the sendfile case the function do_sendfile() zero's flags, ./fs/read_write.c: static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos, size_t count, loff_t max) { ... fl = 0; #if 0 /* * We need to debate whether we can enable this or not. The * man page documents EAGAIN return for the output at least, * and the application is arguably buggy if it doesn't expect * EAGAIN on a non-blocking file descriptor. */ if (in.file->f_flags & O_NONBLOCK) fl = SPLICE_F_NONBLOCK; #endif file_start_write(out.file); retval = do_splice_direct(in.file, &pos, out.file, &out_pos, count, fl); } In the splice case the pipe_to_sendpage "actor" is used which masks flags with SPLICE_F_MORE. ./fs/splice.c: static int pipe_to_sendpage(struct pipe_inode_info *pipe, struct pipe_buffer *buf, struct splice_desc *sd) { ... more = (sd->flags & SPLICE_F_MORE) ? MSG_MORE : 0; ... } Confirming what we expect that internal flags are in fact internal to socket side. Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-20bpf: sk_msg, zap ingress queue on psock downJohn Fastabend
In addition to releasing any cork'ed data on a psock when the psock is removed we should also release any skb's in the ingress work queue. Otherwise the skb's eventually get free'd but late in the tear down process so we see the WARNING due to non-zero sk_forward_alloc. void sk_stream_kill_queues(struct sock *sk) { ... WARN_ON(sk->sk_forward_alloc); ... } Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-20bpf: sk_msg, fix socket data_ready eventsJohn Fastabend
When a skb verdict program is in-use and either another BPF program redirects to that socket or the new SK_PASS support is used the data_ready callback does not wake up application. Instead because the stream parser/verdict is using the sk data_ready callback we wake up the stream parser/verdict block. Fix this by adding a helper to check if the stream parser block is enabled on the sk and if so call the saved pointer which is the upper layers wake up function. This fixes application stalls observed when an application is waiting for data in a blocking read(). Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-20bpf: skb_verdict, support SK_PASS on RX BPF pathJohn Fastabend
Add SK_PASS verdict support to SK_SKB_VERDICT programs. Now that support for redirects exists we can implement SK_PASS as a redirect to the same socket. This simplifies the BPF programs and avoids an extra map lookup on RX path for simple visibility cases. Further, reduces user (BPF programmer in this context) confusion when their program drops skb due to lack of support. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-20bpf: skmsg, replace comments with BUILD bugJohn Fastabend
Enforce comment on structure layout dependency with a BUILD_BUG_ON to ensure the condition is maintained. Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-20bpf: sk_msg, improve offset chk in _is_valid_accessJohn Fastabend
The check for max offset in sk_msg_is_valid_access uses sizeof() which is incorrect because it would allow accessing possibly past the end of the struct in the padded case. Further, it doesn't preclude accessing any padding that may be added in the middle of a struct. All told this makes it fragile to rely on. To fix this explicitly check offsets with fields using the bpf_ctx_range() and bpf_ctx_range_till() macros. For reference the current structure layout looks as follows (reported by pahole) struct sk_msg_md { union { void * data; /* 8 */ }; /* 0 8 */ union { void * data_end; /* 8 */ }; /* 8 8 */ __u32 family; /* 16 4 */ __u32 remote_ip4; /* 20 4 */ __u32 local_ip4; /* 24 4 */ __u32 remote_ip6[4]; /* 28 16 */ __u32 local_ip6[4]; /* 44 16 */ __u32 remote_port; /* 60 4 */ /* --- cacheline 1 boundary (64 bytes) --- */ __u32 local_port; /* 64 4 */ __u32 size; /* 68 4 */ /* size: 72, cachelines: 2, members: 10 */ /* last cacheline: 8 bytes */ }; So there should be no padding at the moment but fixing this now prevents future errors. Reported-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Lots of conflicts, by happily all cases of overlapping changes, parallel adds, things of that nature. Thanks to Stephen Rothwell, Saeed Mahameed, and others for their guidance in these resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2018-12-20 Two last patches for this release cycle: 1) Remove an unused variable in xfrm_policy_lookup_bytype(). From YueHaibing. 2) Fix possible infinite loop in __xfrm6_tunnel_alloc_spi(). Also from YueHaibing. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19neighbor: Use nda_policy for validating attributes in adds and dump requestsDavid Ahern
Add NDA_PROTOCOL to nda_policy and use the policy for attribute parsing and validation for adding neighbors and in dump requests. Remove the now duplicate checks on nla_len. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Off by one in netlink parsing of mac802154_hwsim, from Alexander Aring. 2) nf_tables RCU usage fix from Taehee Yoo. 3) Flow dissector needs nhoff and thoff clamping, from Stanislav Fomichev. 4) Missing sin6_flowinfo initialization in SCTP, from Xin Long. 5) Spectrev1 in ipmr and ip6mr, from Gustavo A. R. Silva. 6) Fix r8169 crash when DEBUG_SHIRQ is enabled, from Heiner Kallweit. 7) Fix SKB leak in rtlwifi, from Larry Finger. 8) Fix state pruning in bpf verifier, from Jakub Kicinski. 9) Don't handle completely duplicate fragments as overlapping, from Michal Kubecek. 10) Fix memory corruption with macb and 64-bit DMA, from Anssi Hannula. 11) Fix TCP fallback socket release in smc, from Myungho Jung. 12) gro_cells_destroy needs to napi_disable, from Lorenzo Bianconi. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (130 commits) rds: Fix warning. neighbor: NTF_PROXY is a valid ndm_flag for a dump request net: mvpp2: fix the phylink mode validation net/sched: cls_flower: Remove old entries from rhashtable net/tls: allocate tls context using GFP_ATOMIC iptunnel: make TUNNEL_FLAGS available in uapi gro_cell: add napi_disable in gro_cells_destroy lan743x: Remove MAC Reset from initialization net/mlx5e: Remove the false indication of software timestamping support net/mlx5: Typo fix in del_sw_hw_rule net/mlx5e: RX, Fix wrong early return in receive queue poll ipv6: explicitly initialize udp6_addr in udp_sock_create6() bnxt_en: Fix ethtool self-test loopback. net/rds: remove user triggered WARN_ON in rds_sendmsg net/rds: fix warn in rds_message_alloc_sgs ath10k: skip sending quiet mode cmd for WCN3990 mac80211: free skb fraglist before freeing the skb nl80211: fix memory leak if validate_pae_over_nl80211() fails net/smc: fix TCP fallback socket release vxge: ensure data0 is initialized in when fetching firmware version information ...
2018-12-19rds: Fix warning.David S. Miller
>> net/rds/send.c:1109:42: warning: Using plain integer as NULL pointer Fixes: ea010070d0a7 ("net/rds: fix warn in rds_message_alloc_sgs") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19neighbor: NTF_PROXY is a valid ndm_flag for a dump requestDavid Ahern
When dumping proxy entries the dump request has NTF_PROXY set in ndm_flags. strict mode checking needs to be updated to allow this flag. Fixes: 51183d233b5a ("net/neighbor: Update neigh_dump_info for strict data checking") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19neighbor: Initialize protocol when new pneigh_entry are createdDavid Ahern
pneigh_lookup uses kmalloc versus kzalloc when new entries are allocated. Given that the newly added protocol field needs to be initialized. Fixes: df9b0e30d44c ("neighbor: Add protocol attribute") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net/sched: cls_flower: Remove old entries from rhashtableRoi Dayan
When replacing a rule we add the new rule to the rhashtable but only remove the old if not in skip_sw. This commit fix this and remove the old rule anyway. Fixes: 35cc3cefc4de ("net/sched: cls_flower: Reject duplicated rules also under skip_sw") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net/tls: allocate tls context using GFP_ATOMICGanesh Goudar
create_ctx can be called from atomic context, hence use GFP_ATOMIC instead of GFP_KERNEL. [ 395.962599] BUG: sleeping function called from invalid context at mm/slab.h:421 [ 395.979896] in_atomic(): 1, irqs_disabled(): 0, pid: 16254, name: openssl [ 395.996564] 2 locks held by openssl/16254: [ 396.010492] #0: 00000000347acb52 (sk_lock-AF_INET){+.+.}, at: do_tcp_setsockopt.isra.44+0x13b/0x9a0 [ 396.029838] #1: 000000006c9552b5 (device_spinlock){+...}, at: tls_init+0x1d/0x280 [ 396.047675] CPU: 5 PID: 16254 Comm: openssl Tainted: G O 4.20.0-rc6+ #25 [ 396.066019] Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.0c 09/25/2017 [ 396.083537] Call Trace: [ 396.096265] dump_stack+0x5e/0x8b [ 396.109876] ___might_sleep+0x216/0x250 [ 396.123940] kmem_cache_alloc_trace+0x1b0/0x240 [ 396.138800] create_ctx+0x1f/0x60 [ 396.152504] tls_init+0xbd/0x280 [ 396.166135] tcp_set_ulp+0x191/0x2d0 [ 396.180035] ? tcp_set_ulp+0x2c/0x2d0 [ 396.193960] do_tcp_setsockopt.isra.44+0x148/0x9a0 [ 396.209013] __sys_setsockopt+0x7c/0xe0 [ 396.223054] __x64_sys_setsockopt+0x20/0x30 [ 396.237378] do_syscall_64+0x4a/0x180 [ 396.251200] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: df9d4a178022 ("net/tls: sleeping function from invalid context") Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19gro_cell: add napi_disable in gro_cells_destroyLorenzo Bianconi
Add napi_disable routine in gro_cells_destroy since starting from commit c42858eaf492 ("gro_cells: remove spinlock protecting receive queues") gro_cell_poll and gro_cells_destroy can run concurrently on napi_skbs list producing a kernel Oops if the tunnel interface is removed while gro_cell_poll is running. The following Oops has been triggered removing a vxlan device while the interface is receiving traffic [ 5628.948853] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 5628.949981] PGD 0 P4D 0 [ 5628.950308] Oops: 0002 [#1] SMP PTI [ 5628.950748] CPU: 0 PID: 9 Comm: ksoftirqd/0 Not tainted 4.20.0-rc6+ #41 [ 5628.952940] RIP: 0010:gro_cell_poll+0x49/0x80 [ 5628.955615] RSP: 0018:ffffc9000004fdd8 EFLAGS: 00010202 [ 5628.956250] RAX: 0000000000000000 RBX: ffffe8ffffc08150 RCX: 0000000000000000 [ 5628.957102] RDX: 0000000000000000 RSI: ffff88802356bf00 RDI: ffffe8ffffc08150 [ 5628.957940] RBP: 0000000000000026 R08: 0000000000000000 R09: 0000000000000000 [ 5628.958803] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000040 [ 5628.959661] R13: ffffe8ffffc08100 R14: 0000000000000000 R15: 0000000000000040 [ 5628.960682] FS: 0000000000000000(0000) GS:ffff88803ea00000(0000) knlGS:0000000000000000 [ 5628.961616] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5628.962359] CR2: 0000000000000008 CR3: 000000000221c000 CR4: 00000000000006b0 [ 5628.963188] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5628.964034] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5628.964871] Call Trace: [ 5628.965179] net_rx_action+0xf0/0x380 [ 5628.965637] __do_softirq+0xc7/0x431 [ 5628.966510] run_ksoftirqd+0x24/0x30 [ 5628.966957] smpboot_thread_fn+0xc5/0x160 [ 5628.967436] kthread+0x113/0x130 [ 5628.968283] ret_from_fork+0x3a/0x50 [ 5628.968721] Modules linked in: [ 5628.969099] CR2: 0000000000000008 [ 5628.969510] ---[ end trace 9d9dedc7181661fe ]--- [ 5628.970073] RIP: 0010:gro_cell_poll+0x49/0x80 [ 5628.972965] RSP: 0018:ffffc9000004fdd8 EFLAGS: 00010202 [ 5628.973611] RAX: 0000000000000000 RBX: ffffe8ffffc08150 RCX: 0000000000000000 [ 5628.974504] RDX: 0000000000000000 RSI: ffff88802356bf00 RDI: ffffe8ffffc08150 [ 5628.975462] RBP: 0000000000000026 R08: 0000000000000000 R09: 0000000000000000 [ 5628.976413] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000040 [ 5628.977375] R13: ffffe8ffffc08100 R14: 0000000000000000 R15: 0000000000000040 [ 5628.978296] FS: 0000000000000000(0000) GS:ffff88803ea00000(0000) knlGS:0000000000000000 [ 5628.979327] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5628.980044] CR2: 0000000000000008 CR3: 000000000221c000 CR4: 00000000000006b0 [ 5628.980929] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5628.981736] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5628.982409] Kernel panic - not syncing: Fatal exception in interrupt [ 5628.983307] Kernel Offset: disabled Fixes: c42858eaf492 ("gro_cells: remove spinlock protecting receive queues") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19neighbour: register rtnl doit handlerRoopa Prabhu
this patch registers neigh doit handler. The doit handler returns a neigh entry given dst and dev. This is similar to route and fdb doit (get) handlers. Also moves nda_policy declaration from rtnetlink.c to neighbour.c Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19xsk: simplify AF_XDP socket teardownBjörn Töpel
Prior this commit, when the struct socket object was being released, the UMEM did not have its reference count decreased. Instead, this was done in the struct sock sk_destruct function. There is no reason to keep the UMEM reference around when the socket is being orphaned, so in this patch the xdp_put_mem is called in the xsk_release function. This results in that the xsk_destruct function can be removed! Note that, it still holds that a struct xsk_sock reference might still linger in the XSKMAP after the UMEM is released, e.g. if a user does not clear the XSKMAP prior to closing the process. This sock will be in a "released" zombie like state, until the XSKMAP is removed. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-19ipv6: explicitly initialize udp6_addr in udp_sock_create6()Cong Wang
syzbot reported the use of uninitialized udp6_addr::sin6_scope_id. We can just set ::sin6_scope_id to zero, as tunnels are unlikely to use an IPv6 address that needs a scope id and there is no interface to bind in this context. For net-next, it looks different as we have cfg->bind_ifindex there so we can probably call ipv6_iface_scope_id(). Same for ::sin6_flowinfo, tunnels don't use it. Fixes: 8024e02879dd ("udp: Add udp_sock_create for UDP tunnels to open listener socket") Reported-by: syzbot+c56449ed3652e6720f30@syzkaller.appspotmail.com Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19tipc: fix uninitialized value for broadcast retransmissionHoang Le
When sending broadcast message on high load system, there are a lot of unnecessary packets restranmission. That issue was caused by missing in initial criteria for retransmission. To prevent this happen, just initialize this criteria for retransmission in next 10 milliseconds. Fixes: 31c4f4cc32f7 ("tipc: improve broadcast retransmission algorithm") Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19tipc: add trace_events for tipc bearerTuong Lien
The commit adds the new trace_event for TIPC bearer, L2 device event: trace_tipc_l2_device_event() Also, it puts the trace at the tipc_l2_device_event() function, then the device/bearer events and related info can be traced out during runtime when needed. Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19tipc: add trace_events for tipc nodeTuong Lien
The commit adds the new trace_events for TIPC node object: trace_tipc_node_create() trace_tipc_node_delete() trace_tipc_node_lost_contact() trace_tipc_node_timeout() trace_tipc_node_link_up() trace_tipc_node_link_down() trace_tipc_node_reset_links() trace_tipc_node_fsm_evt() trace_tipc_node_check_state() Also, enables the traces for the following cases: - When a node is created/deleted; - When a node contact is lost; - When a node timer is timed out; - When a node link is up/down; - When all node links are reset; - When node state is changed; - When a skb comes and node state needs to be checked/updated. Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19tipc: add trace_events for tipc socketTuong Lien
The commit adds the new trace_events for TIPC socket object: trace_tipc_sk_create() trace_tipc_sk_poll() trace_tipc_sk_sendmsg() trace_tipc_sk_sendmcast() trace_tipc_sk_sendstream() trace_tipc_sk_filter_rcv() trace_tipc_sk_advance_rx() trace_tipc_sk_rej_msg() trace_tipc_sk_drop_msg() trace_tipc_sk_release() trace_tipc_sk_shutdown() trace_tipc_sk_overlimit1() trace_tipc_sk_overlimit2() Also, enables the traces for the following cases: - When user creates a TIPC socket; - When user calls poll() on TIPC socket; - When user sends a dgram/mcast/stream message. - When a message is put into the socket 'sk_receive_queue'; - When a message is released from the socket 'sk_receive_queue'; - When a message is rejected (e.g. due to no port, invalid, etc.); - When a message is dropped (e.g. due to wrong message type); - When socket is released; - When socket is shutdown; - When socket rcvq's allocation is overlimit (> 90%); - When socket rcvq + bklq's allocation is overlimit (> 90%); - When the 'TIPC_ERR_OVERLOAD/2' issue happens; Note: a) All the socket traces are designed to be able to trace on a specific socket by either using the 'event filtering' feature on a known socket 'portid' value or the sysctl file: /proc/sys/net/tipc/sk_filter The file determines a 'tuple' for what socket should be traced: (portid, sock type, name type, name lower, name upper) where: + 'portid' is the socket portid generated at socket creating, can be found in the trace outputs or the 'tipc socket list' command printouts; + 'sock type' is the socket type (1 = SOCK_TREAM, ...); + 'name type', 'name lower' and 'name upper' are the service name being connected to or published by the socket. Value '0' means 'ANY', the default tuple value is (0, 0, 0, 0, 0) i.e. the traces happen for every sockets with no filter. b) The 'tipc_sk_overlimit1/2' event is also a conditional trace_event which happens when the socket receive queue (and backlog queue) is about to be overloaded, when the queue allocation is > 90%. Then, when the trace is enabled, the last skbs leading to the TIPC_ERR_OVERLOAD/2 issue can be traced. The trace event is designed as an 'upper watermark' notification that the other traces (e.g. 'tipc_sk_advance_rx' vs 'tipc_sk_filter_rcv') or actions can be triggerred in the meanwhile to see what is going on with the socket queue. In addition, the 'trace_tipc_sk_dump()' is also placed at the 'TIPC_ERR_OVERLOAD/2' case, so the socket and last skb can be dumped for post-analysis. Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19tipc: add trace_events for tipc linkTuong Lien
The commit adds the new trace_events for TIPC link object: trace_tipc_link_timeout() trace_tipc_link_fsm() trace_tipc_link_reset() trace_tipc_link_too_silent() trace_tipc_link_retrans() trace_tipc_link_bc_ack() trace_tipc_link_conges() And the traces for PROTOCOL messages at building and receiving: trace_tipc_proto_build() trace_tipc_proto_rcv() Note: a) The 'tipc_link_too_silent' event will only happen when the 'silent_intv_cnt' is about to reach the 'abort_limit' value (and the event is enabled). The benefit for this kind of event is that we can get an early indication about TIPC link loss issue due to timeout, then can do some necessary actions for troubleshooting. For example: To trigger the 'tipc_proto_rcv' when the 'too_silent' event occurs: echo 'enable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_too_silent/trigger And disable it when TIPC link is reset: echo 'disable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_reset/trigger b) The 'tipc_link_retrans' or 'tipc_link_bc_ack' event is useful to trace TIPC retransmission issues. In addition, the commit adds the 'trace_tipc_list/link_dump()' at the 'retransmission failure' case. Then, if the issue occurs, the link 'transmq' along with the link data can be dumped for post-analysis. These dump events should be enabled by default since it will only take effect when the failure happens. The same approach is also applied for the faulty case that the validation of protocol message is failed. Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19tipc: enable tracepoints in tipcTuong Lien
As for the sake of debugging/tracing, the commit enables tracepoints in TIPC along with some general trace_events as shown below. It also defines some 'tipc_*_dump()' functions that allow to dump TIPC object data whenever needed, that is, for general debug purposes, ie. not just for the trace_events. The following trace_events are now available: - trace_tipc_skb_dump(): allows to trace and dump TIPC msg & skb data, e.g. message type, user, droppable, skb truesize, cloned skb, etc. - trace_tipc_list_dump(): allows to trace and dump any TIPC buffers or queues, e.g. TIPC link transmq, socket receive queue, etc. - trace_tipc_sk_dump(): allows to trace and dump TIPC socket data, e.g. sk state, sk type, connection type, rmem_alloc, socket queues, etc. - trace_tipc_link_dump(): allows to trace and dump TIPC link data, e.g. link state, silent_intv_cnt, gap, bc_gap, link queues, etc. - trace_tipc_node_dump(): allows to trace and dump TIPC node data, e.g. node state, active links, capabilities, link entries, etc. How to use: Put the trace functions at any places where we want to dump TIPC data or events. Note: a) The dump functions will generate raw data only, that is, to offload the trace event's processing, it can require a tool or script to parse the data but this should be simple. b) The trace_tipc_*_dump() should be reserved for a failure cases only (e.g. the retransmission failure case) or where we do not expect to happen too often, then we can consider enabling these events by default since they will almost not take any effects under normal conditions, but once the rare condition or failure occurs, we get the dumped data fully for post-analysis. For other trace purposes, we can reuse these trace classes as template but different events. c) A trace_event is only effective when we enable it. To enable the TIPC trace_events, echo 1 to 'enable' files in the events/tipc/ directory in the 'debugfs' file system. Normally, they are located at: /sys/kernel/debug/tracing/events/tipc/ For example: To enable the tipc_link_dump event: echo 1 > /sys/kernel/debug/tracing/events/tipc/tipc_link_dump/enable To enable all the TIPC trace_events: echo 1 > /sys/kernel/debug/tracing/events/tipc/enable To collect the trace data: cat trace or cat trace_pipe > /trace.out & To disable all the TIPC trace_events: echo 0 > /sys/kernel/debug/tracing/events/tipc/enable To clear the trace buffer: echo > trace d) Like the other trace_events, the feature like 'filter' or 'trigger' is also usable for the tipc trace_events. For more details, have a look at: Documentation/trace/ftrace.txt MAINTAINERS | add two new files 'trace.h' & 'trace.c' in tipc Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: switch secpath to use skb extension infrastructureFlorian Westphal
Remove skb->sp and allocate secpath storage via extension infrastructure. This also reduces sk_buff by 8 bytes on x86_64. Total size of allyesconfig kernel is reduced slightly, as there is less inlined code (one conditional atomic op instead of two on skb_clone). No differences in throughput in following ipsec performance tests: - transport mode with aes on 10GB link - tunnel mode between two network namespaces with aes and null cipher Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19xfrm: prefer secpath_set over secpath_dupFlorian Westphal
secpath_set is a wrapper for secpath_dup that will not perform an allocation if the secpath attached to the skb has a reference count of one, i.e., it doesn't need to be COW'ed. Also, secpath_dup doesn't attach the secpath to the skb, it leaves this to the caller. Use secpath_set in places that immediately assign the return value to skb. This allows to remove skb->sp without touching these spots again. secpath_dup can eventually be removed in followup patch. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19xfrm: use secpath_exist where applicableFlorian Westphal
Will reduce noise when skb->sp is removed later in this series. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 19:47:43 +0000