| Age | Commit message (Collapse) | Author |
|---|
|
Creation of sysfs entries is expensive, mainly for workloads that
constantly creates netdev and netns often.
Do not create BQL sysfs entries for devices that don't need,
basically those that do not have a real queue, i.e, devices that has
NETIF_F_LLTX and IFF_NO_QUEUE, such as `lo` interface.
This will remove the /sys/class/net/eth0/queues/tx-X/byte_queue_limits/
directory for these devices.
In the example below, eth0 has the `byte_queue_limits` directory but not
`lo`.
# ls /sys/class/net/lo/queues/tx-0/
traffic_class tx_maxrate tx_timeout xps_cpus xps_rxqs
# ls /sys/class/net/eth0/queues/tx-0/byte_queue_limits/
hold_time inflight limit limit_max limit_min
This also removes the #ifdefs, since we can also use netdev_uses_bql() to
check if the config is enabled. (as suggested by Jakub).
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240216094154.3263843-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use global percpu page_pool_recycle_stats counter for system page_pool
allocator instead of allocating a separate percpu variable for each
(also percpu) page pool instance.
Reviewed-by: Toke Hoiland-Jorgensen <toke@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/87f572425e98faea3da45f76c3c68815c01a20ee.1708075412.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that direct recycling is performed basing on pool->cpuid when set,
memory leaks are possible:
1. A pool is destroyed.
2. Alloc cache is emptied (it's done only once).
3. pool->cpuid is still set.
4. napi_pp_put_page() does direct recycling basing on pool->cpuid.
5. Now alloc cache is not empty, but it won't ever be freed.
In order to avoid that, rewrite pool->cpuid to -1 when unlinking NAPI to
make sure no direct recycling will be possible after emptying the cache.
This involves a bit of overhead as pool->cpuid now must be accessed
via READ_ONCE() to avoid partial reads.
Rename page_pool_unlink_napi() -> page_pool_disable_direct_recycling()
to reflect what it actually does and unexport it.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20240215113905.96817-1-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct tc_pedit.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fullmesh endpoints could end-up unexpectedly generating duplicate
subflows - same local and remote addresses - when multiple incoming
ADD_ADDR are processed before the PM creates the subflow for the local
endpoints.
Address the issue explicitly checking for duplicates at subflow
creation time.
To avoid a quadratic computational complexity, track the unavailable
remote address ids in a temporary bitmap and initialize such bitmap
with the remote ids of all the existing subflows matching the local
address currently processed.
The above allows additionally replacing the existing code checking
for duplicate entry in the current set with a simple bit test
operation.
Fixes: 2843ff6f36db ("mptcp: remote addresses fullmesh")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/435
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to the previous patch, address the data race on
remote_id, adding the suitable ONCE annotations.
Fixes: bedee0b56113 ("mptcp: address lookup improvements")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The local address id is accessed lockless by the NL PM, add
all the required ONCE annotation. There is a caveat: the local
id can be initialized late in the subflow life-cycle, and its
validity is controlled by the local_id_valid flag.
Remove such flag and encode the validity in the local_id field
itself with negative value before initialization. That allows
accessing the field consistently with a single read operation.
Fixes: 0ee4261a3681 ("mptcp: implement mptcp_pm_remove_subflow")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the introduction of the subflow ULP diag interface, the
dump callback accessed all the subflow data with lockless.
We need either to annotate all the read and write operation accordingly,
or acquire the subflow socket lock. Let's do latter, even if slower, to
avoid a diffstat havoc.
Fixes: 5147dfb50832 ("mptcp: allow dumping subflow context to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Just the same as userspace PM, a new parameter needs_id is added for
in-kernel PM mptcp_pm_nl_append_new_local_addr() too.
Add a new helper mptcp_pm_has_addr_attr_id() to check whether an address
ID is set from PM or not.
In mptcp_pm_nl_get_local_id(), needs_id is always true, but in
mptcp_pm_nl_add_addr_doit(), pass mptcp_pm_has_addr_attr_id() to
needs_it.
Fixes: efd5a4c04e18 ("mptcp: add the address ID assignment bitmap")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When userspace PM requires to create an ID 0 subflow in "userspace pm
create id 0 subflow" test like this:
userspace_pm_add_sf $ns2 10.0.3.2 0
An ID 1 subflow, in fact, is created.
Since in mptcp_pm_nl_append_new_local_addr(), 'id 0' will be treated as
no ID is set by userspace, and will allocate a new ID immediately:
if (!e->addr.id)
e->addr.id = find_next_zero_bit(pernet->id_bitmap,
MPTCP_PM_MAX_ADDR_ID + 1,
1);
To solve this issue, a new parameter needs_id is added for
mptcp_userspace_pm_append_new_local_addr() to distinguish between
whether userspace PM has set an ID 0 or whether userspace PM has
not set any address.
needs_id is true in mptcp_userspace_pm_get_local_id(), but false in
mptcp_pm_nl_announce_doit() and mptcp_pm_nl_subflow_create_doit().
Fixes: e5ed101a6028 ("mptcp: userspace pm allow creating id 0 subflow")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
net->dev_base_seq and ipv6.dev_addr_genid are monotonically increasing.
If we XOR their values, we could miss to detect if both values
were changed with the same amount.
Fixes: 63998ac24f83 ("ipv6: provide addr and netconf dump consistency info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
net->dev_base_seq and ipv4.dev_addr_genid are monotonically increasing.
If we XOR their values, we could miss to detect if both values
were changed with the same amount.
Fixes: 0465277f6b3f ("ipv4: provide addr and netconf dump consistency info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is impossible to disable BQL individually today, since there is no
prompt for the Kconfig entry, so, the BQL is always enabled if SYSFS is
enabled.
Create a prompt entry for BQL, so, it could be enabled or disabled at
build time independently of SYSFS.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If we're redirecting the skb, and haven't called tcf_mirred_forward(),
yet, we need to tell the core to drop the skb by setting the retcode
to SHOT. If we have called tcf_mirred_forward(), however, the skb
is out of our hands and returning SHOT will lead to UaF.
Move the retval override to the error path which actually need it.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Fixes: e5cf1baf92cb ("act_mirred: use TC_ACT_REINSERT when possible")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The test Davide added in commit ca22da2fbd69 ("act_mirred: use the backlog
for nested calls to mirred ingress") hangs our testing VMs every 10 or so
runs, with the familiar tcp_v4_rcv -> tcp_v4_rcv deadlock reported by
lockdep.
The problem as previously described by Davide (see Link) is that
if we reverse flow of traffic with the redirect (egress -> ingress)
we may reach the same socket which generated the packet. And we may
still be holding its socket lock. The common solution to such deadlocks
is to put the packet in the Rx backlog, rather than run the Rx path
inline. Do that for all egress -> ingress reversals, not just once
we started to nest mirred calls.
In the past there was a concern that the backlog indirection will
lead to loss of error reporting / less accurate stats. But the current
workaround does not seem to address the issue.
Fixes: 53592b364001 ("net/sched: act_mirred: Implement ingress actions")
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/netdev/33dc43f587ec1388ba456b4915c75f02a8aae226.1663945716.git.dcaratti@redhat.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a misspelling of "circuit".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzkaller reported a warning [0] in inet_csk_destroy_sock() with no
repro.
WARN_ON(inet_sk(sk)->inet_num && !inet_csk(sk)->icsk_bind_hash);
However, the syzkaller's log hinted that connect() failed just before
the warning due to FAULT_INJECTION. [1]
When connect() is called for an unbound socket, we search for an
available ephemeral port. If a bhash bucket exists for the port, we
call __inet_check_established() or __inet6_check_established() to check
if the bucket is reusable.
If reusable, we add the socket into ehash and set inet_sk(sk)->inet_num.
Later, we look up the corresponding bhash2 bucket and try to allocate
it if it does not exist.
Although it rarely occurs in real use, if the allocation fails, we must
revert the changes by check_established(). Otherwise, an unconnected
socket could illegally occupy an ehash entry.
Note that we do not put tw back into ehash because sk might have
already responded to a packet for tw and it would be better to free
tw earlier under such memory presure.
[0]:
WARNING: CPU: 0 PID: 350830 at net/ipv4/inet_connection_sock.c:1193 inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193)
Modules linked in:
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193)
Code: 41 5c 41 5d 41 5e e9 2d 4a 3d fd e8 28 4a 3d fd 48 89 ef e8 f0 cd 7d ff 5b 5d 41 5c 41 5d 41 5e e9 13 4a 3d fd e8 0e 4a 3d fd <0f> 0b e9 61 fe ff ff e8 02 4a 3d fd 4c 89 e7 be 03 00 00 00 e8 05
RSP: 0018:ffffc9000b21fd38 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000009e78 RCX: ffffffff840bae40
RDX: ffff88806e46c600 RSI: ffffffff840bb012 RDI: ffff88811755cca8
RBP: ffff88811755c880 R08: 0000000000000003 R09: 0000000000000000
R10: 0000000000009e78 R11: 0000000000000000 R12: ffff88811755c8e0
R13: ffff88811755c892 R14: ffff88811755c918 R15: 0000000000000000
FS: 00007f03e5243800(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32f21000 CR3: 0000000112ffe001 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
? inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193)
dccp_close (net/dccp/proto.c:1078)
inet_release (net/ipv4/af_inet.c:434)
__sock_release (net/socket.c:660)
sock_close (net/socket.c:1423)
__fput (fs/file_table.c:377)
__fput_sync (fs/file_table.c:462)
__x64_sys_close (fs/open.c:1557 fs/open.c:1539 fs/open.c:1539)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129)
RIP: 0033:0x7f03e53852bb
Code: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 43 c9 f5 ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 c9 f5 ff 8b 44
RSP: 002b:00000000005dfba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f03e53852bb
RDX: 0000000000000002 RSI: 0000000000000002 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000167c
R10: 0000000008a79680 R11: 0000000000000293 R12: 00007f03e4e43000
R13: 00007f03e4e43170 R14: 00007f03e4e43178 R15: 00007f03e4e43170
</TASK>
[1]:
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
CPU: 0 PID: 350833 Comm: syz-executor.1 Not tainted 6.7.0-12272-g2121c43f88f5 #9
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1))
should_fail_ex (lib/fault-inject.c:52 lib/fault-inject.c:153)
should_failslab (mm/slub.c:3748)
kmem_cache_alloc (mm/slub.c:3763 mm/slub.c:3842 mm/slub.c:3867)
inet_bind2_bucket_create (net/ipv4/inet_hashtables.c:135)
__inet_hash_connect (net/ipv4/inet_hashtables.c:1100)
dccp_v4_connect (net/dccp/ipv4.c:116)
__inet_stream_connect (net/ipv4/af_inet.c:676)
inet_stream_connect (net/ipv4/af_inet.c:747)
__sys_connect_file (net/socket.c:2048 (discriminator 2))
__sys_connect (net/socket.c:2065)
__x64_sys_connect (net/socket.c:2072)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129)
RIP: 0033:0x7f03e5284e5d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007f03e4641cc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007f03e5284e5d
RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000003
RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 000000000000000b R14: 00007f03e52e5530 R15: 0000000000000000
</TASK>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When unoffloading a device, it is important to ensure that all
relevant deferred events are delivered to it before it disassociates
itself from the bridge.
Before this change, this was true for the normal case when a device
maps 1:1 to a net_bridge_port, i.e.
br0
/
swp0
When swp0 leaves br0, the call to switchdev_deferred_process() in
del_nbp() makes sure to process any outstanding events while the
device is still associated with the bridge.
In the case when the association is indirect though, i.e. when the
device is attached to the bridge via an intermediate device, like a
LAG...
br0
/
lag0
/
swp0
...then detaching swp0 from lag0 does not cause any net_bridge_port to
be deleted, so there was no guarantee that all events had been
processed before the device disassociated itself from the bridge.
Fix this by always synchronously processing all deferred events before
signaling completion of unoffloading back to the driver.
Fixes: 4e51bf44a03a ("net: bridge: move the switchdev object replay helpers to "push" mode")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before this change, generation of the list of MDB events to replay
would race against the creation of new group memberships, either from
the IGMP/MLD snooping logic or from user configuration.
While new memberships are immediately visible to walkers of
br->mdb_list, the notification of their existence to switchdev event
subscribers is deferred until a later point in time. So if a replay
list was generated during a time that overlapped with such a window,
it would also contain a replay of the not-yet-delivered event.
The driver would thus receive two copies of what the bridge internally
considered to be one single event. On destruction of the bridge, only
a single membership deletion event was therefore sent. As a
consequence of this, drivers which reference count memberships (at
least DSA), would be left with orphan groups in their hardware
database when the bridge was destroyed.
This is only an issue when replaying additions. While deletion events
may still be pending on the deferred queue, they will already have
been removed from br->mdb_list, so no duplicates can be generated in
that scenario.
To a user this meant that old group memberships, from a bridge in
which a port was previously attached, could be reanimated (in
hardware) when the port joined a new bridge, without the new bridge's
knowledge.
For example, on an mv88e6xxx system, create a snooping bridge and
immediately add a port to it:
root@infix-06-0b-00:~$ ip link add dev br0 up type bridge mcast_snooping 1 && \
> ip link set dev x3 up master br0
And then destroy the bridge:
root@infix-06-0b-00:~$ ip link del dev br0
root@infix-06-0b-00:~$ mvls atu
ADDRESS FID STATE Q F 0 1 2 3 4 5 6 7 8 9 a
DEV:0 Marvell 88E6393X
33:33:00:00:00:6a 1 static - - 0 . . . . . . . . . .
33:33:ff:87:e4:3f 1 static - - 0 . . . . . . . . . .
ff:ff:ff:ff:ff:ff 1 static - - 0 1 2 3 4 5 6 7 8 9 a
root@infix-06-0b-00:~$
The two IPv6 groups remain in the hardware database because the
port (x3) is notified of the host's membership twice: once via the
original event and once via a replay. Since only a single delete
notification is sent, the count remains at 1 when the bridge is
destroyed.
Then add the same port (or another port belonging to the same hardware
domain) to a new bridge, this time with snooping disabled:
root@infix-06-0b-00:~$ ip link add dev br1 up type bridge mcast_snooping 0 && \
> ip link set dev x3 up master br1
All multicast, including the two IPv6 groups from br0, should now be
flooded, according to the policy of br1. But instead the old
memberships are still active in the hardware database, causing the
switch to only forward traffic to those groups towards the CPU (port
0).
Eliminate the race in two steps:
1. Grab the write-side lock of the MDB while generating the replay
list.
This prevents new memberships from showing up while we are generating
the replay list. But it leaves the scenario in which a deferred event
was already generated, but not delivered, before we grabbed the
lock. Therefore:
2. Make sure that no deferred version of a replay event is already
enqueued to the switchdev deferred queue, before adding it to the
replay list, when replaying additions.
Fixes: 4f2673b3a2b6 ("net: bridge: add helper to replay port and host-joined mdb entries")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
iucv_path_table is a dynamically allocated array of pointers to
struct iucv_path items. Yet, its size is calculated as if it was
an array of struct iucv_path items.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix virtual vs physical address confusion. This does not fix a bug
since virtual and physical address spaces are currently the same.
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The code block under the "!ds->user_mii_bus && ds->ops->phy_read" check
under dsa_switch_setup() populates ds->user_mii_bus. The use of
ds->user_mii_bus is inappropriate when the MDIO bus of the switch is
described on the device tree [1].
For this reason, use this code block only for switches [with MDIO bus]
probed on platform_data, and OF which the switch MDIO bus isn't described
on the device tree. Therefore, remove OF-based MDIO bus registration as
it's useless for these cases.
These subdrivers which control switches [with MDIO bus] probed on OF, will
lose the ability to register the MDIO bus OF-based:
drivers/net/dsa/b53/b53_common.c
drivers/net/dsa/lan9303-core.c
drivers/net/dsa/vitesse-vsc73xx-core.c
These subdrivers let the DSA core driver register the bus:
- ds->ops->phy_read() and ds->ops->phy_write() are present.
- ds->user_mii_bus is not populated.
The commit fe7324b93222 ("net: dsa: OF-ware slave_mii_bus") which brought
OF-based MDIO bus registration on the DSA core driver is reasonably recent
and, in this time frame, there have been no device trees in the Linux
repository that started describing the MDIO bus, or dt-bindings defining
the MDIO bus for the switches these subdrivers control. So I don't expect
any devices to be affected.
The logic we encourage is that all subdrivers should register the switch
MDIO bus on their own [2]. And, for subdrivers which control switches [with
MDIO bus] probed on OF, this logic must be followed to support all cases
properly:
No switch MDIO bus defined: Populate ds->user_mii_bus, register the MDIO
bus, set the interrupts for PHYs if "interrupt-controller" is defined at
the switch node. This case should only be covered for the switches which
their dt-bindings documentation didn't document the MDIO bus from the
start. This is to keep supporting the device trees that do not describe the
MDIO bus on the device tree but the MDIO bus is being used nonetheless.
Switch MDIO bus defined: Don't populate ds->user_mii_bus, register the MDIO
bus, set the interrupts for PHYs if ["interrupt-controller" is defined at
the switch node and "interrupts" is defined at the PHY nodes under the
switch MDIO bus node].
Switch MDIO bus defined but explicitly disabled: If the device tree says
status = "disabled" for the MDIO bus, we shouldn't need an MDIO bus at all.
Instead, just exit as early as possible and do not call any MDIO API.
After all subdrivers that control switches with MDIO buses are made to
register the MDIO buses on their own, we will be able to get rid of
dsa_switch_ops :: phy_read() and :: phy_write(), and the code block for
registering the MDIO bus on the DSA core driver.
Link: https://lore.kernel.org/netdev/20231213120656.x46fyad6ls7sqyzv@skbuf/ [1]
Link: https://lore.kernel.org/netdev/20240103184459.dcbh57wdnlox6w7d@skbuf/ [2]
Suggested-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Acked-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240213-for-netnext-dsa-mdio-bus-v2-1-0ff6f4823a9e@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Stanislaw Gruszka says:
====================
thermal/netlink/intel_hfi: Enable HFI feature only when required
The patchset introduces a new genetlink family bind/unbind callbacks
and thermal/netlink notifications, which allow drivers to send netlink
multicast events based on the presence of actual user-space consumers.
This functionality optimizes resource usage by allowing disabling
of features when not needed.
v1: https://lore.kernel.org/linux-pm/20240131120535.933424-1-stanislaw.gruszka@linux.intel.com//
v2: https://lore.kernel.org/linux-pm/20240206133605.1518373-1-stanislaw.gruszka@linux.intel.com/
v3: https://lore.kernel.org/linux-pm/20240209120625.1775017-1-stanislaw.gruszka@linux.intel.com/
====================
Link: https://lore.kernel.org/r/20240212161615.161935-1-stanislaw.gruszka@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add genetlink family bind()/unbind() callbacks when adding/removing
multicast group to/from netlink client socket via setsockopt() or
bind() syscall.
They can be used to track if consumers of netlink multicast messages
emerge or disappear. Thus, a client implementing callbacks, can now
send events only when there are active consumers, preventing unnecessary
work when none exist.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240212161615.161935-2-stanislaw.gruszka@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/dev.c
9f30831390ed ("net: add rcu safety to rtnl_prop_list_size()")
723de3ebef03 ("net: free altname using an RCU callback")
net/unix/garbage.c
11498715f266 ("af_unix: Remove io_uring code for GC.")
25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.")
drivers/net/ethernet/renesas/ravb_main.c
ed4adc07207d ("net: ravb: Count packets instead of descriptors in GbEth RX path"
)
c2da9408579d ("ravb: Add Rx checksum offload support for GbEth")
net/mptcp/protocol.c
bdd70eb68913 ("mptcp: drop the push_pending field")
28e5c1380506 ("mptcp: annotate lockless accesses around read-mostly fields")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, wireless and netfilter.
Current release - regressions:
- af_unix: fix task hung while purging oob_skb in GC
- pds_core: do not try to run health-thread in VF path
Current release - new code bugs:
- sched: act_mirred: don't zero blockid when net device is being
deleted
Previous releases - regressions:
- netfilter:
- nat: restore default DNAT behavior
- nf_tables: fix bidirectional offload, broken when unidirectional
offload support was added
- openvswitch: limit the number of recursions from action sets
- eth: i40e: do not allow untrusted VF to remove administratively set
MAC address
Previous releases - always broken:
- tls: fix races and bugs in use of async crypto
- mptcp: prevent data races on some of the main socket fields, fix
races in fastopen handling
- dpll: fix possible deadlock during netlink dump operation
- dsa: lan966x: fix crash when adding interface under a lag when some
of the ports are disabled
- can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
Misc:
- a handful of fixes and reliability improvements for selftests
- fix sysfs documentation missing net/ in paths
- finish the work of squashing the missing MODULE_DESCRIPTION()
warnings in networking"
* tag 'net-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
net: fill in MODULE_DESCRIPTION()s for missing arcnet
net: fill in MODULE_DESCRIPTION()s for mdio_devres
net: fill in MODULE_DESCRIPTION()s for ppp
net: fill in MODULE_DESCRIPTION()s for fddik/skfp
net: fill in MODULE_DESCRIPTION()s for plip
net: fill in MODULE_DESCRIPTION()s for ieee802154/fakelb
net: fill in MODULE_DESCRIPTION()s for xen-netback
net: ravb: Count packets instead of descriptors in GbEth RX path
pppoe: Fix memory leak in pppoe_sendmsg()
net: sctp: fix skb leak in sctp_inq_free()
net: bcmasp: Handle RX buffer allocation failure
net-timestamp: make sk_tskey more predictable in error path
selftests: tls: increase the wait in poll_partial_rec_async
ice: Add check for lport extraction to LAG init
netfilter: nf_tables: fix bidirectional offload regression
netfilter: nat: restore default DNAT behavior
netfilter: nft_set_pipapo: fix missing : in kdoc
igc: Remove temporary workaround
igb: Fix string truncation warnings in igb_set_fw_version
can: netlink: Fix TDCO calculation using the old data bittiming
...
|
|
In case of GSO, 'chunk->skb' pointer may point to an entry from
fraglist created in 'sctp_packet_gso_append()'. To avoid freeing
random fraglist entry (and so undefined behavior and/or memory
leak), introduce 'sctp_inq_chunk_free()' helper to ensure that
'chunk->skb' is set to 'chunk->head_skb' (i.e. fraglist head)
before calling 'sctp_chunk_free()', and use the aforementioned
helper in 'sctp_inq_pop()' as well.
Reported-by: syzbot+8bb053b5d63595ab47db@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?id=0d8351bbe54fd04a492c2daab0164138db008042
Fixes: 90017accff61 ("sctp: Add GSO support")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20240214082224.10168-1-dmantipov@yandex.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the preferred lifetime was less than the minimum required lifetime,
ipv6_create_tempaddr would error out without creating any new address.
On my machine and network, this error happened immediately with the
preferred lifetime set to 5 seconds or less, after a few minutes with
the preferred lifetime set to 6 seconds, and not at all with the
preferred lifetime set to 7 seconds. During my investigation, I found a
Stack Exchange post from another person who seems to have had the same
problem: They stopped getting new addresses if they lowered the
preferred lifetime below 3 seconds, and they didn't really know why.
The preferred lifetime is a preference, not a hard requirement. The
kernel does not strictly forbid new connections on a deprecated address,
nor does it guarantee that the address will be disposed of the instant
its total valid lifetime expires. So rather than disable IPv6 privacy
extensions altogether if the minimum required lifetime swells above the
preferred lifetime, it is more in keeping with the user's intent to
increase the temporary address's lifetime to the minimum necessary for
the current network conditions.
With these fixes, setting the preferred lifetime to 5 or 6 seconds "just
works" because the extra fraction of a second is practically
unnoticeable. It's even possible to reduce the time before deprecation
to 1 or 2 seconds by setting /proc/sys/net/ipv6/conf/*/regen_min_advance
and /proc/sys/net/ipv6/conf/*/dad_transmits to 0. I realize that that is
a pretty niche use case, but I know at least one person who would gladly
sacrifice performance and convenience to be sure that they are getting
the maximum possible level of privacy.
Link: https://serverfault.com/a/1031168/310447
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In RFC 8981, REGEN_ADVANCE cannot be less than 2 seconds, and the RFC
does not permit the creation of temporary addresses with lifetimes
shorter than that:
> When processing a Router Advertisement with a
> Prefix Information option carrying a prefix for the purposes of
> address autoconfiguration (i.e., the A bit is set), the host MUST
> perform the following steps:
> 5. A temporary address is created only if this calculated preferred
> lifetime is greater than REGEN_ADVANCE time units.
However, some users want to change their IPv6 address as frequently as
possible regardless of the RFC's arbitrary minimum lifetime. For the
benefit of those users, add a regen_min_advance sysctl parameter that
can be set to below or above 2 seconds.
Link: https://datatracker.ietf.org/doc/html/rfc8981
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
RFC 8981 defines REGEN_ADVANCE as follows:
REGEN_ADVANCE = 2 + (TEMP_IDGEN_RETRIES * DupAddrDetectTransmits * RetransTimer / 1000)
Thus, allowing it to be less than 2 seconds is technically a protocol
violation.
Link: https://datatracker.ietf.org/doc/html/rfc8981#name-defined-protocol-parameters
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Consolidate the error paths of tipc_nl_bearer_add() under the common label
if the function holds rtnl_lock.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20240213134058.386123-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since tcp_conn_request() always returns zero, there is no need to
keep the dead code. Remove it then.
Link: https://lore.kernel.org/netdev/CANn89iJwx9b2dUGUKFSV3PF=kN5o+kxz3A_fHZZsOS4AnXhBNw@mail.gmail.com/
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240213131205.4309-1-kerneljasonxing@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
1) Missing : in kdoc field in nft_set_pipapo.
2) Restore default DNAT behavior When a DNAT rule is configured via
iptables with different port ranges, from Kyle Swenson.
3) Restore flowtable hardware offload for bidirectional flows
by setting NF_FLOW_HW_BIDIRECTIONAL flag, from Felix Fietkau.
netfilter pull request 24-02-15
* tag 'nf-24-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fix bidirectional offload regression
netfilter: nat: restore default DNAT behavior
netfilter: nft_set_pipapo: fix missing : in kdoc
====================
Link: https://lore.kernel.org/r/20240214233818.7946-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-02-14
this is a pull request of 3 patches for net/master.
the first patch is by Ziqi Zhao and targets the CAN J1939 protocol, it
fixes a potential deadlock by replacing the spinlock by an rwlock.
Oleksij Rempel's patch adds a missing spin_lock_bh() to prevent a
potential Use-After-Free in the CAN J1939's
setsockopt(SO_J1939_FILTER).
Maxime Jayat contributes a patch to fix the transceiver delay
compensation (TDCO) calculation, which is needed for higher CAN-FD bit
rates (usually 2Mbit/s).
* tag 'linux-can-fixes-for-6.8-20240214' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: netlink: Fix TDCO calculation using the old data bittiming
can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
====================
Link: https://lore.kernel.org/r/20240214140348.2412776-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When SOF_TIMESTAMPING_OPT_ID is used to ambiguate timestamped datagrams,
the sk_tskey can become unpredictable in case of any error happened
during sendmsg(). Move increment later in the code and make decrement of
sk_tskey in error path. This solution is still racy in case of multiple
threads doing snedmsg() over the very same socket in parallel, but still
makes error path much more predictable.
Fixes: 09c2d251b707 ("net-timestamp: add key to disambiguate concurrent datagrams")
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240213110428.1681540-1-vadfed@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It's currently possible to change the mesh ID when the
interface isn't yet in mesh mode, at the same time as
changing it into mesh mode. This leads to an overwrite
of data in the wdev->u union for the interface type it
currently has, causing cfg80211_change_iface() to do
wrong things when switching.
We could probably allow setting an interface to mesh
while setting the mesh ID at the same time by doing a
different order of operations here, but realistically
there's no userspace that's going to do this, so just
disallow changes in iftype when setting mesh ID.
Cc: stable@vger.kernel.org
Fixes: 29cbe68c516a ("cfg80211/mac80211: add mesh join/leave commands")
Reported-by: syzbot+dd4779978217b1973180@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Even if that's the same as IEEE80211_MAX_SSID_LEN, we really
should just use IEEE80211_MAX_MESH_ID_LEN for mesh, rather
than having the BUILD_BUG_ON()s.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There's a conflict already and some upcoming changes
also depend on changes in wireless for being conflict-
free, so pull wireless in to make all that easier.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Valentine's day edition, with just few fixes because
that's how we love it ;-)
iwlwifi:
- correct A3 in A-MSDUs
- fix crash when operating as AP and running out of station
slots to use
- clear link ID to correct some later checks against it
- fix error codes in SAR table loading
- fix error path in PPAG table read
mac80211:
- reload a pointer after SKB may have changed
(only in certain monitor inject mode scenarios)
* tag 'wireless-2024-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mvm: fix a crash when we run out of stations
wifi: iwlwifi: uninitialized variable in iwl_acpi_get_ppag_table()
wifi: iwlwifi: Fix some error codes
wifi: iwlwifi: clear link_id in time_event
wifi: iwlwifi: mvm: use correct address 3 in A-MSDU
wifi: mac80211: reload info pointer in ieee80211_tx_dequeue()
====================
Link: https://lore.kernel.org/r/20240214184326.132813-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 8f84780b84d6 ("netfilter: flowtable: allow unidirectional rules")
made unidirectional flow offload possible, while completely ignoring (and
breaking) bidirectional flow offload for nftables.
Add the missing flag that was left out as an exercise for the reader :)
Cc: Vlad Buslov <vladbu@nvidia.com>
Fixes: 8f84780b84d6 ("netfilter: flowtable: allow unidirectional rules")
Reported-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When a DNAT rule is configured via iptables with different port ranges,
iptables -t nat -A PREROUTING -p tcp -d 10.0.0.2 -m tcp --dport 32000:32010
-j DNAT --to-destination 192.168.0.10:21000-21010
we seem to be DNATing to some random port on the LAN side. While this is
expected if --random is passed to the iptables command, it is not
expected without passing --random. The expected behavior (and the
observed behavior prior to the commit in the "Fixes" tag) is the traffic
will be DNAT'd to 192.168.0.10:21000 unless there is a tuple collision
with that destination. In that case, we expect the traffic to be
instead DNAT'd to 192.168.0.10:21001, so on so forth until the end of
the range.
This patch intends to restore the behavior observed prior to the "Fixes"
tag.
Fixes: 6ed5943f8735 ("netfilter: nat: remove l4 protocol port rovers")
Signed-off-by: Kyle Swenson <kyle.swenson@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add missing : in kdoc field names.
Fixes: 8683f4b9950d ("nft_set_pipapo: Prepare for vectorised implementation: helpers")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Lock jsk->sk to prevent UAF when setsockopt(..., SO_J1939_FILTER, ...)
modifies jsk->filters while receiving packets.
Following trace was seen on affected system:
==================================================================
BUG: KASAN: slab-use-after-free in j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939]
Read of size 4 at addr ffff888012144014 by task j1939/350
CPU: 0 PID: 350 Comm: j1939 Tainted: G W OE 6.5.0-rc5 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
print_report+0xd3/0x620
? kasan_complete_mode_report_info+0x7d/0x200
? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939]
kasan_report+0xc2/0x100
? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939]
__asan_load4+0x84/0xb0
j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939]
j1939_sk_recv+0x20b/0x320 [can_j1939]
? __kasan_check_write+0x18/0x20
? __pfx_j1939_sk_recv+0x10/0x10 [can_j1939]
? j1939_simple_recv+0x69/0x280 [can_j1939]
? j1939_ac_recv+0x5e/0x310 [can_j1939]
j1939_can_recv+0x43f/0x580 [can_j1939]
? __pfx_j1939_can_recv+0x10/0x10 [can_j1939]
? raw_rcv+0x42/0x3c0 [can_raw]
? __pfx_j1939_can_recv+0x10/0x10 [can_j1939]
can_rcv_filter+0x11f/0x350 [can]
can_receive+0x12f/0x190 [can]
? __pfx_can_rcv+0x10/0x10 [can]
can_rcv+0xdd/0x130 [can]
? __pfx_can_rcv+0x10/0x10 [can]
__netif_receive_skb_one_core+0x13d/0x150
? __pfx___netif_receive_skb_one_core+0x10/0x10
? __kasan_check_write+0x18/0x20
? _raw_spin_lock_irq+0x8c/0xe0
__netif_receive_skb+0x23/0xb0
process_backlog+0x107/0x260
__napi_poll+0x69/0x310
net_rx_action+0x2a1/0x580
? __pfx_net_rx_action+0x10/0x10
? __pfx__raw_spin_lock+0x10/0x10
? handle_irq_event+0x7d/0xa0
__do_softirq+0xf3/0x3f8
do_softirq+0x53/0x80
</IRQ>
<TASK>
__local_bh_enable_ip+0x6e/0x70
netif_rx+0x16b/0x180
can_send+0x32b/0x520 [can]
? __pfx_can_send+0x10/0x10 [can]
? __check_object_size+0x299/0x410
raw_sendmsg+0x572/0x6d0 [can_raw]
? __pfx_raw_sendmsg+0x10/0x10 [can_raw]
? apparmor_socket_sendmsg+0x2f/0x40
? __pfx_raw_sendmsg+0x10/0x10 [can_raw]
sock_sendmsg+0xef/0x100
sock_write_iter+0x162/0x220
? __pfx_sock_write_iter+0x10/0x10
? __rtnl_unlock+0x47/0x80
? security_file_permission+0x54/0x320
vfs_write+0x6ba/0x750
? __pfx_vfs_write+0x10/0x10
? __fget_light+0x1ca/0x1f0
? __rcu_read_unlock+0x5b/0x280
ksys_write+0x143/0x170
? __pfx_ksys_write+0x10/0x10
? __kasan_check_read+0x15/0x20
? fpregs_assert_state_consistent+0x62/0x70
__x64_sys_write+0x47/0x60
do_syscall_64+0x60/0x90
? do_syscall_64+0x6d/0x90
? irqentry_exit+0x3f/0x50
? exc_page_fault+0x79/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Allocated by task 348:
kasan_save_stack+0x2a/0x50
kasan_set_track+0x29/0x40
kasan_save_alloc_info+0x1f/0x30
__kasan_kmalloc+0xb5/0xc0
__kmalloc_node_track_caller+0x67/0x160
j1939_sk_setsockopt+0x284/0x450 [can_j1939]
__sys_setsockopt+0x15c/0x2f0
__x64_sys_setsockopt+0x6b/0x80
do_syscall_64+0x60/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 349:
kasan_save_stack+0x2a/0x50
kasan_set_track+0x29/0x40
kasan_save_free_info+0x2f/0x50
__kasan_slab_free+0x12e/0x1c0
__kmem_cache_free+0x1b9/0x380
kfree+0x7a/0x120
j1939_sk_setsockopt+0x3b2/0x450 [can_j1939]
__sys_setsockopt+0x15c/0x2f0
__x64_sys_setsockopt+0x6b/0x80
do_syscall_64+0x60/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Fixes: 9d71dd0c70099 ("can: add support of SAE J1939 protocol")
Reported-by: Sili Luo <rootlab@huawei.com>
Suggested-by: Sili Luo <rootlab@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20231020133814.383996-1-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The following 3 locks would race against each other, causing the
deadlock situation in the Syzbot bug report:
- j1939_socks_lock
- active_session_list_lock
- sk_session_queue_lock
A reasonable fix is to change j1939_socks_lock to an rwlock, since in
the rare situations where a write lock is required for the linked list
that j1939_socks_lock is protecting, the code does not attempt to
acquire any more locks. This would break the circular lock dependency,
where, for example, the current thread already locks j1939_socks_lock
and attempts to acquire sk_session_queue_lock, and at the same time,
another thread attempts to acquire j1939_socks_lock while holding
sk_session_queue_lock.
NOTE: This patch along does not fix the unregister_netdevice bug
reported by Syzbot; instead, it solves a deadlock situation to prepare
for one or more further patches to actually fix the Syzbot bug, which
appears to be a reference counting problem within the j1939 codebase.
Reported-by: <syzbot+1591462f226d9cbf0564@syzkaller.appspotmail.com>
Signed-off-by: Ziqi Zhao <astrajoan@yahoo.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20230721162226.8639-1-astrajoan@yahoo.com
[mkl: remove unrelated newline change]
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
dev_base_lock is not needed anymore, all remaining users also hold RTNL.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RTNL already protects writes to dev->reg_state, we no longer need to hold
dev_base_lock to protect the readers.
unlist_netdevice() second argument can be removed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We hold RTNL here, and dev->link_mode readers already
are using READ_ONCE().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dev_base_lock is going away, add netdev_set_operstate() helper
so that hsr does not have to know core internals.
Remove dev_base_lock acquisition from rfc2863_policy()
v3: use an "unsigned int" for dev->operstate,
so that try_cmpxchg() can work on all arches.
( https://lore.kernel.org/oe-kbuild-all/202402081918.OLyGaea3-lkp@intel.com/ )
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dev_get_stats() can be called from RCU, there is no need
to acquire dev_base_lock.
Change dev_isalive() comment to reflect we no longer use
dev_base_lock from net/core/net-sysfs.c
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
operstate_show() can omit dev_base_lock acquisition only
to read dev->operstate.
Annotate accesses to dev->operstate.
Writers still acquire dev_base_lock for mutual exclusion.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
