summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2017-08-01crush: assume weight_set != null imples weight_set_size > 0Ilya Dryomov
Reflects ceph.git commit 5e8fa3e06b68fae1582c9230a3a8d1abc6146286. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2017-08-01libceph: fallback for when there isn't a pool-specific choose_argIlya Dryomov
There is now a fallback to a choose_arg index of -1 if there isn't a pool-specific choose_arg set. If you create a per-pool weight-set, that works for that pool. Otherwise we try the compat/default one. If that doesn't exist either, then we use the normal CRUSH weights. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2017-08-01libceph: don't call ->reencode_message() more than once per messageIlya Dryomov
Reencoding an already reencoded message is a bad idea. This could happen on Policy::stateful_server connections (!CEPH_MSG_CONNECT_LOSSY), such as MDS sessions. This didn't pop up in testing because currently only OSD requests are reencoded and OSD sessions are always lossy. Fixes: 98ad5ebd1505 ("libceph: ceph_connection_operations::reencode_message() method") Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2017-08-01libceph: make encode_request_*() work with r_mempool requestsIlya Dryomov
Messages allocated out of ceph_msgpool have a fixed front length (pool->front_len). Asserting that the entire front has been filled while encoding is thus wrong. Fixes: 8cb441c0545d ("libceph: MOSDOp v8 encoding (actual spgid + full hash)") Reported-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2017-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Handle notifier registry failures properly in tun/tap driver, from Tonghao Zhang. 2) Fix bpf verifier handling of subtraction bounds and add a testcase for this, from Edward Cree. 3) Increase reset timeout in ftgmac100 driver, from Ben Herrenschmidt. 4) Fix use after free in prd_retire_rx_blk_timer_exired() in AF_PACKET, from Cong Wang. 5) Fix SElinux regression due to recent UDP optimizations, from Paolo Abeni. 6) We accidently increment IPSTATS_MIB_FRAGFAILS in the ipv6 code paths, fix from Stefano Brivio. 7) Fix some mem leaks in dccp, from Xin Long. 8) Adjust MDIO_BUS kconfig deps to avoid build errors, from Arnd Bergmann. 9) Mac address length check and buffer size fixes from Cong Wang. 10) Don't leak sockets in ipv6 udp early demux, from Paolo Abeni. 11) Fix return value when copy_from_user() fails in bpf_prog_get_info_by_fd(), from Daniel Borkmann. 12) Handle PHY_HALTED properly in phy library state machine, from Florian Fainelli. 13) Fix OOPS in fib_sync_down_dev(), from Ido Schimmel. 14) Fix truesize calculation in virtio_net which led to performance regressions, from Michael S Tsirkin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) samples/bpf: fix bpf tunnel cleanup udp6: fix jumbogram reception ppp: Fix a scheduling-while-atomic bug in del_chan Revert "net: bcmgenet: Remove init parameter from bcmgenet_mii_config" virtio_net: fix truesize for mergeable buffers mv643xx_eth: fix of_irq_to_resource() error check MAINTAINERS: Add more files to the PHY LIBRARY section ipv4: fib: Fix NULL pointer deref during fib_sync_down_dev() net: phy: Correctly process PHY_HALTED in phy_stop_machine() sunhme: fix up GREG_STAT and GREG_IMASK register offsets bpf: fix bpf_prog_get_info_by_fd to dump correct xlated_prog_len tcp: avoid bogus gcc-7 array-bounds warning net: tc35815: fix spelling mistake: "Intterrupt" -> "Interrupt" bpf: don't indicate success when copy_from_user fails udp6: fix socket leak on early demux net: thunderx: Fix BGX transmit stall due to underflow Revert "vhost: cache used event for better performance" team: use a larger struct for mac address net: check dev->addr_len for dev_set_mac_address() phy: bcm-ns-usb3: fix MDIO_BUS dependency ...
2017-07-31udp6: fix jumbogram receptionPaolo Abeni
Since commit 67a51780aebb ("ipv6: udp: leverage scratch area helpers") udp6_recvmsg() read the skb len from the scratch area, to avoid a cache miss. But the UDP6 rx path support RFC 2675 UDPv6 jumbograms, and their length exceeds the 16 bits available in the scratch area. As a side effect the length returned by recvmsg() is: <ingress datagram len> % (1<<16) This commit addresses the issue allocating one more bit in the IP6CB flags field and setting it for incoming jumbograms. Such field is still in the first cacheline, so at recvmsg() time we can check it and fallback to access skb->len if required, without a measurable overhead. Fixes: 67a51780aebb ("ipv6: udp: leverage scratch area helpers") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31ipv6: Avoid going through ->sk_net to access the netnsJakub Sitnicki
There is no need to go through sk->sk_net to access the net namespace and its sysctl variables because we allocate the sock and initialize sk_net just a few lines earlier in the same routine. Signed-off-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31ipv4: fib: Fix NULL pointer deref during fib_sync_down_dev()Ido Schimmel
Michał reported a NULL pointer deref during fib_sync_down_dev() when unregistering a netdevice. The problem is that we don't check for 'in_dev' being NULL, which can happen in very specific cases. Usually routes are flushed upon NETDEV_DOWN sent in either the netdev or the inetaddr notification chains. However, if an interface isn't configured with any IP address, then it's possible for host routes to be flushed following NETDEV_UNREGISTER, after NULLing dev->ip_ptr in inetdev_destroy(). To reproduce: $ ip link add type dummy $ ip route add local 1.1.1.0/24 dev dummy0 $ ip link del dev dummy0 Fix this by checking for the presence of 'in_dev' before referencing it. Fixes: 982acb97560c ("ipv4: fib: Notify about nexthop status changes") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31tcp: add related fields into SCM_TIMESTAMPING_OPT_STATSWei Wang
Add the following stats into SCM_TIMESTAMPING_OPT_STATS control msg: TCP_NLA_PACING_RATE TCP_NLA_DELIVERY_RATE TCP_NLA_SND_CWND TCP_NLA_REORDERING TCP_NLA_MIN_RTT TCP_NLA_RECUR_RETRANS TCP_NLA_DELIVERY_RATE_APP_LMT Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31tcp: extract the function to compute delivery rateWei Wang
Refactor the code to extract the function to compute delivery rate. This function will be used in later commit. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31tcp: remove unused mib countersFlorian Westphal
was used by tcp prequeue and header prediction. TCPFORWARDRETRANS use was removed in january. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31tcp: remove CA_ACK_SLOWPATHFlorian Westphal
re-indent tcp_ack, and remove CA_ACK_SLOWPATH; it is always set now. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31tcp: remove header predictionFlorian Westphal
Like prequeue, I am not sure this is overly useful nowadays. If we receive a train of packets, GRO will aggregate them if the headers are the same (HP predates GRO by several years) so we don't get a per-packet benefit, only a per-aggregated-packet one. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31tcp: remove low_latency sysctlFlorian Westphal
Was only checked by the removed prequeue code. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31tcp: reindent two spots after prequeue removalFlorian Westphal
These two branches are now always true, remove the conditional. objdiff shows no changes. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31tcp: remove prequeue supportFlorian Westphal
prequeue is a tcp receive optimization that moves part of rx processing from bh to process context. This only works if the socket being processed belongs to a process that is blocked in recv on that socket. In practice, this doesn't happen anymore that often because nowadays servers tend to use an event driven (epoll) model. Even normal client applications (web browsers) commonly use many tcp connections in parallel. This has measureable impact only in netperf (which uses plain recv and thus allows prequeue use) from host to locally running vm (~4%), however, there were no changes when using netperf between two physical hosts with ixgbe interfaces. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31netfilter: conntrack: do not enable connection tracking unless neededFlorian Westphal
Discussion during NFWS 2017 in Faro has shown that the current conntrack behaviour is unreasonable. Even if conntrack module is loaded on behalf of a single net namespace, its turned on for all namespaces, which is expensive. Commit 481fa373476 ("netfilter: conntrack: add nf_conntrack_default_on sysctl") attempted to provide an alternative to the 'default on' behaviour by adding a sysctl to change it. However, as Eric points out, the sysctl only becomes available once the module is loaded, and then its too late. So we either have to move the sysctl to the core, or, alternatively, change conntrack to become active only once the rule set requires this. This does the latter, conntrack is only enabled when a rule needs it. Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-07-31netfilter: nft_set_rbtree: use seqcount to avoid lock in most casesFlorian Westphal
switch to lockless lockup. write side now also increments sequence counter. On lookup, sample counter value and only take the lock if we did not find a match and the counter has changed. This avoids need to write to private area in normal (lookup) cases. In case we detect a writer (seqretry is true) we fall back to taking the readlock. The readlock is also used during dumps to ensure we get a consistent tree walk. Similar technique (rbtree+seqlock) was used by David Howells in rxrpc. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-07-31netfilter: nf_tables: Allow object names of up to 255 charsPhil Sutter
Same conversion as for table names, use NFT_NAME_MAXLEN as upper boundary as well. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-07-31netfilter: nf_tables: Allow set names of up to 255 charsPhil Sutter
Same conversion as for table names, use NFT_NAME_MAXLEN as upper boundary as well. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-07-31netfilter: nf_tables: Allow chain name of up to 255 charsPhil Sutter
Same conversion as for table names, use NFT_NAME_MAXLEN as upper boundary as well. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-07-31netfilter: nf_tables: Allow table names of up to 255 charsPhil Sutter
Allocate all table names dynamically to allow for arbitrary lengths but introduce NFT_NAME_MAXLEN as an upper sanity boundary. It's value was chosen to allow using a domain name as per RFC 1035. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-07-31netfilter: x_tables: Fix use-after-free in ipt_do_table.Taehee Yoo
If verdict is NF_STOLEN in the SYNPROXY target, the skb is consumed. However, ipt_do_table() always tries to get ip header from the skb. So that, KASAN triggers the use-after-free message. We can reproduce this message using below command. # iptables -I INPUT -p tcp -j SYNPROXY --mss 1460 [ 193.542265] BUG: KASAN: use-after-free in ipt_do_table+0x1405/0x1c10 [ ... ] [ 193.578603] Call Trace: [ 193.581590] <IRQ> [ 193.584107] dump_stack+0x68/0xa0 [ 193.588168] print_address_description+0x78/0x290 [ 193.593828] ? ipt_do_table+0x1405/0x1c10 [ 193.598690] kasan_report+0x230/0x340 [ 193.603194] __asan_report_load2_noabort+0x19/0x20 [ 193.608950] ipt_do_table+0x1405/0x1c10 [ 193.613591] ? rcu_read_lock_held+0xae/0xd0 [ 193.618631] ? ip_route_input_rcu+0x27d7/0x4270 [ 193.624348] ? ipt_do_table+0xb68/0x1c10 [ 193.629124] ? do_add_counters+0x620/0x620 [ 193.634234] ? iptable_filter_net_init+0x60/0x60 [ ... ] After this patch, only when verdict is XT_CONTINUE, ipt_do_table() tries to get ip header. Also arpt_do_table() is modified because it has same bug. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-07-31netfilter: nf_tables: No need to check chain existence when tracingPhil Sutter
nft_trace_notify() is called only from __nft_trace_packet(), which assigns its parameter 'chain' to info->chain. __nft_trace_packet() in turn later dereferences 'chain' unconditionally, which indicates that it's never NULL. Same does nft_do_chain(), the only user of the tracing infrastructure. Hence it is safe to assume the check removed here is not needed. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-07-31netfilter: nf_hook_ops structs can be constFlorian Westphal
We no longer place these on a list so they can be const. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-07-31netfilter: nfnetlink_queue: don't queue dying conntracks to userspaceFlorian Westphal
When skb is queued to userspace it leaves softirq/rcu protection. skb->nfct (via conntrack extensions such as helper) could then reference modules that no longer exist if the conntrack was not yet confirmed. nf_ct_iterate_destroy() will set the DYING bit for unconfirmed conntracks, we therefore solve this race as follows: 1. take the queue spinlock. 2. check if the conntrack is unconfirmed and has dying bit set. In this case, we must discard skb while we're still inside rcu read-side section. 3. If nf_ct_iterate_destroy() is called right after the packet is queued to userspace, it will be removed from the queue via nf_ct_iterate_destroy -> nf_queue_nf_hook_drop. When userspace sends the verdict (nfnetlink takes rcu read lock), there are two cases to consider: 1. nf_ct_iterate_destroy() was called while packet was out. In this case, skb will have been removed from the queue already and no reinject takes place as we won't find a matching entry for the packet id. 2. nf_ct_iterate_destroy() gets called right after verdict callback found and removed the skb from queue list. In this case, skb->nfct is marked as dying but it is still valid. The skb will be dropped either in nf_conntrack_confirm (we don't insert DYING conntracks into hash table) or when we try to queue the skb again, but either events don't occur before the rcu read lock is dropped. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-07-31netfilter: conntrack: destroy functions need to free queued packetsFlorian Westphal
queued skbs might be using conntrack extensions that are being removed, such as timeout. This happens for skbs that have a skb->nfct in unconfirmed state (i.e., not in hash table yet). This is destructive, but there are only two use cases: - module removal (rare) - netns cleanup (most likely no conntracks exist, and if they do, they are removed anyway later on). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-07-31netfilter: add and use nf_ct_unconfirmed_destroyFlorian Westphal
This also removes __nf_ct_unconfirmed_destroy() call from nf_ct_iterate_cleanup_net, so that function can be used only when missing conntracks from unconfirmed list isn't a problem. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-07-31netfilter: expect: add and use nf_ct_expect_iterate helpersFlorian Westphal
We have several spots that open-code a expect walk, add a helper that is similar to nf_ct_iterate_destroy/nf_ct_iterate_cleanup. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-07-31netfilter: conntrack: Change to deferable work queuesubashab@codeaurora.org
Delayed workqueue causes wakeups to idle CPUs. This was causing a power impact for devices. Use deferable work queue instead so that gc_worker runs when CPU is active only. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-07-31netfilter: nf_tables: add fib expression to the netdev familyPablo M. Bermudo Garay
Add fib expression support for netdev family. Like inet family, netdev delegates the actual decision to the corresponding backend, either ipv4 or ipv6. This allows to perform very early reverse path filtering, among other things. You can find more information about fib expression in the f6d0cbcf09c5 ("<netfilter: nf_tables: add fib expression>") commit message. Signed-off-by: Pablo M. Bermudo Garay <pablombg@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-07-31netfilter: nf_tables: fib: use skb_header_pointerPablo M. Bermudo Garay
This is a preparatory patch for adding fib support to the netdev family. The netdev family receives the packets from ingress hook. At this point we have no guarantee that the ip header is linear. So this patch replaces ip_hdr with skb_header_pointer in order to address that possible situation. Signed-off-by: Pablo M. Bermudo Garay <pablombg@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-07-31batman-adv: fix TT sync flag inconsistenciesLinus Lüssing
This patch fixes an issue in the translation table code potentially leading to a TT Request + Response storm. The issue may occur for nodes involving BLA and an inconsistent configuration of the batman-adv AP isolation feature. However, since the new multicast optimizations, a single, malformed packet may lead to a mesh-wide, persistent Denial-of-Service, too. The issue occurs because nodes are currently OR-ing the TT sync flags of all originators announcing a specific MAC address via the translation table. When an intermediate node now receives a TT Request and wants to answer this on behalf of the destination node, then this intermediate node now responds with an altered flag field and broken CRC. The next OGM of the real destination will lead to a CRC mismatch and triggering a TT Request and Response again. Furthermore, the OR-ing is currently never undone as long as at least one originator announcing the according MAC address remains, leading to the potential persistency of this issue. This patch fixes this issue by storing the flags used in the CRC calculation on a a per TT orig entry basis to be able to respond with the correct, original flags in an intermediate TT Response for one thing. And to be able to correctly unset sync flags once all nodes announcing a sync flag vanish for another. Fixes: e9c00136a475 ("batman-adv: fix tt_global_entries flags update") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Acked-by: Antonio Quartulli <a@unstable.cc> [sw: typo in commit message] Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-07-30net sched actions: add time filter for action dumpingJamal Hadi Salim
This patch adds support for filtering based on time since last used. When we are dumping a large number of actions it is useful to have the option of filtering based on when the action was last used to reduce the amount of data crossing to user space. With this patch the user space app sets the TCA_ROOT_TIME_DELTA attribute with the value in milliseconds with "time of interest since now". The kernel converts this to jiffies and does the filtering comparison matching entries that have seen activity since then and returns them to user space. Old kernels and old tc continue to work in legacy mode since they dont specify this attribute. Some example (we have 400 actions bound to 400 filters); at installation time. Using updated when tc setting the time of interest to 120 seconds earlier (we see 400 actions): prompt$ hackedtc actions ls action gact since 120000| grep index | wc -l 400 go get some coffee and wait for > 120 seconds and try again: prompt$ hackedtc actions ls action gact since 120000 | grep index | wc -l 0 Lets see a filter bound to one of these actions: .... filter pref 10 u32 filter pref 10 u32 fh 800: ht divisor 1 filter pref 10 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:10 (rule hit 2 success 1) match 7f000002/ffffffff at 12 (success 1 ) action order 1: gact action pass random type none pass val 0 index 23 ref 2 bind 1 installed 1145 sec used 802 sec Action statistics: Sent 84 bytes 1 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 .... that coffee took long, no? It was good. Now lets ping -c 1 127.0.0.2, then run the actions again: prompt$ hackedtc actions ls action gact since 120 | grep index | wc -l 1 More details please: prompt$ hackedtc -s actions ls action gact since 120000 action order 0: gact action pass random type none pass val 0 index 23 ref 2 bind 1 installed 1270 sec used 30 sec Action statistics: Sent 168 bytes 2 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 And the filter? filter pref 10 u32 filter pref 10 u32 fh 800: ht divisor 1 filter pref 10 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:10 (rule hit 4 success 2) match 7f000002/ffffffff at 12 (success 2 ) action order 1: gact action pass random type none pass val 0 index 23 ref 2 bind 1 installed 1324 sec used 84 sec Action statistics: Sent 168 bytes 2 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-30net sched actions: dump more than TCA_ACT_MAX_PRIO actions per batchJamal Hadi Salim
When you dump hundreds of thousands of actions, getting only 32 per dump batch even when the socket buffer and memory allocations allow is inefficient. With this change, the user will get as many as possibly fitting within the given constraints available to the kernel. The top level action TLV space is extended. An attribute TCA_ROOT_FLAGS is used to carry flags; flag TCA_FLAG_LARGE_DUMP_ON is set by the user indicating the user is capable of processing these large dumps. Older user space which doesnt set this flag doesnt get the large (than 32) batches. The kernel uses the TCA_ROOT_COUNT attribute to tell the user how many actions are put in a single batch. As such user space app knows how long to iterate (independent of the type of action being dumped) instead of hardcoded maximum of 32 thus maintaining backward compat. Some results dumping 1.5M actions below: first an unpatched tc which doesnt understand these features... prompt$ time -p tc actions ls action gact | grep index | wc -l 1500000 real 1388.43 user 2.07 sys 1386.79 Now lets see a patched tc which sets the correct flags when requesting a dump: prompt$ time -p updatedtc actions ls action gact | grep index | wc -l 1500000 real 178.13 user 2.02 sys 176.96 That is about 8x performance improvement for tc app which sets its receive buffer to about 32K. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-30net sched actions: Use proper root attribute table for actionsJamal Hadi Salim
Bug fix for an issue which has been around for about a decade. We got away with it because the enumeration was larger than needed. Fixes: 7ba699c604ab ("[NET_SCHED]: Convert actions from rtnetlink to new netlink API") Suggested-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29tcp: avoid bogus gcc-7 array-bounds warningArnd Bergmann
When using CONFIG_UBSAN_SANITIZE_ALL, the TCP code produces a false-positive warning: net/ipv4/tcp_output.c: In function 'tcp_connect': net/ipv4/tcp_output.c:2207:40: error: array subscript is below array bounds [-Werror=array-bounds] tp->chrono_stat[tp->chrono_type - 1] += now - tp->chrono_start; ^~ net/ipv4/tcp_output.c:2207:40: error: array subscript is below array bounds [-Werror=array-bounds] tp->chrono_stat[tp->chrono_type - 1] += now - tp->chrono_start; ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ I have opened a gcc bug for this, but distros have already shipped compilers with this problem, and it's not clear yet whether there is a way for gcc to avoid the warning. As the problem is related to the bitfield access, this introduces a temporary variable to store the old enum value. I did not notice this warning earlier, since UBSAN is disabled when building with COMPILE_TEST, and that was always turned on in both allmodconfig and randconfig tests. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81601 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net: ethtool: add support for forward error correction modesVidya Sagar Ravipati
Forward Error Correction (FEC) modes i.e Base-R and Reed-Solomon modes are introduced in 25G/40G/100G standards for providing good BER at high speeds. Various networking devices which support 25G/40G/100G provides ability to manage supported FEC modes and the lack of FEC encoding control and reporting today is a source for interoperability issues for many vendors. FEC capability as well as specific FEC mode i.e. Base-R or RS modes can be requested or advertised through bits D44:47 of base link codeword. This patch set intends to provide option under ethtool to manage and report FEC encoding settings for networking devices as per IEEE 802.3 bj, bm and by specs. set-fec/show-fec option(s) are designed to provide control and report the FEC encoding on the link. SET FEC option: root@tor: ethtool --set-fec swp1 encoding [off | RS | BaseR | auto] Encoding: Types of encoding Off : Turning off any encoding RS : enforcing RS-FEC encoding on supported speeds BaseR : enforcing Base R encoding on supported speeds Auto : IEEE defaults for the speed/medium combination Here are a few examples of what we would expect if encoding=auto: - if autoneg is on, we are expecting FEC to be negotiated as on or off as long as protocol supports it - if the hardware is capable of detecting the FEC encoding on it's receiver it will reconfigure its encoder to match - in absence of the above, the configuration would be set to IEEE defaults. >From our understanding , this is essentially what most hardware/driver combinations are doing today in the absence of a way for users to control the behavior. SHOW FEC option: root@tor: ethtool --show-fec swp1 FEC parameters for swp1: Active FEC encodings: RS Configured FEC encodings: RS | BaseR ETHTOOL DEVNAME output modification: ethtool devname output: root@tor:~# ethtool swp1 Settings for swp1: root@hpe-7712-03:~# ethtool swp18 Settings for swp18: Supported ports: [ FIBRE ] Supported link modes: 40000baseCR4/Full 40000baseSR4/Full 40000baseLR4/Full 100000baseSR4/Full 100000baseCR4/Full 100000baseLR4_ER4/Full Supported pause frame use: No Supports auto-negotiation: Yes Supported FEC modes: [RS | BaseR | None | Not reported] Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: [RS | BaseR | None | Not reported] <<<< One or more FEC modes Speed: 100000Mb/s Duplex: Full Port: FIBRE PHYAD: 106 Transceiver: internal Auto-negotiation: off Link detected: yes This patch includes following changes a) New ETHTOOL_SFECPARAM/SFECPARAM API, handled by the new get_fecparam/set_fecparam callbacks, provides support for configuration of forward error correction modes. b) Link mode bits for FEC modes i.e. None (No FEC mode), RS, BaseR/FC are defined so that users can configure these fec modes for supported and advertising fields as part of link autonegotiation. Signed-off-by: Vidya Sagar Ravipati <vidya.chowdary@gmail.com> Signed-off-by: Dustin Byford <dustin@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29udp6: fix socket leak on early demuxPaolo Abeni
When an early demuxed packet reaches __udp6_lib_lookup_skb(), the sk reference is retrieved and used, but the relevant reference count is leaked and the socket destructor is never called. Beyond leaking the sk memory, if there are pending UDP packets in the receive queue, even the related accounted memory is leaked. In the long run, this will cause persistent forward allocation errors and no UDP skbs (both ipv4 and ipv6) will be able to reach the user-space. Fix this by explicitly accessing the early demux reference before the lookup, and properly decreasing the socket reference count after usage. Also drop the skb_steal_sock() in __udp6_lib_lookup_skb(), and the now obsoleted comment about "socket cache". The newly added code is derived from the current ipv4 code for the similar path. v1 -> v2: fixed the __udp6_lib_rcv() return code for resubmission, as suggested by Eric Reported-by: Sam Edwards <CFSworks@gmail.com> Reported-by: Marc Haber <mh+netdev@zugschlus.de> Fixes: 5425077d73e0 ("net: ipv6: Add early demux handler for UDP unicast") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net: check dev->addr_len for dev_set_mac_address()WANG Cong
Historically, dev_ifsioc() uses struct sockaddr as mac address definition, this is why dev_set_mac_address() accepts a struct sockaddr pointer as input but now we have various types of mac addresse whose lengths are up to MAX_ADDR_LEN, longer than struct sockaddr, and saved in dev->addr_len. It is too late to fix dev_ifsioc() due to API compatibility, so just reject those larger than sizeof(struct sockaddr), otherwise we would read and use some random bytes from kernel stack. Fortunately, only a few IPv6 tunnel devices have addr_len larger than sizeof(struct sockaddr) and they don't support ndo_set_mac_addr(). But with team driver, in lb mode, they can still be enslaved to a team master and make its mac addr length as the same. Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net/smc: synchronize buffer usage with deviceUrsula Braun
Usage of send buffer "sndbuf" is synced (a) before filling sndbuf for cpu access (b) after filling sndbuf for device access Usage of receive buffer "RMB" is synced (a) before reading RMB content for cpu access (b) after reading RMB content for device access Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net/smc: cleanup function __smc_buf_create()Ursula Braun
Split function __smc_buf_create() for better readability. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net/smc: common functions for RMBs and send buffersUrsula Braun
Creation and deletion of SMC receive and send buffers shares a high amount of common code . This patch introduces common functions to get rid of duplicate code. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net/smc: introduce sg-logic for send buffersUrsula Braun
SMC send buffers are processed the same way as RMBs. Since RMBs have been converted to sg-logic, do the same for send buffers. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net/smc: remove Kconfig warningUrsula Braun
Now separate memory regions are created and registered for separate RMBs. The unsafe_global_rkey of the protection domain is no longer used. Thus the exposing memory warning can be removed. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net/smc: register RMB-related memory regionUrsula Braun
A memory region created for a new RMB must be registered explicitly, before the peer can make use of it for remote DMA transfer. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net/smc: use separate memory regions for RMBsUrsula Braun
SMC currently uses the unsafe_global_rkey of the protection domain, which exposes all memory for remote reads and writes once a connection is established. This patch introduces separate memory regions with separate rkeys for every RMB. Now the unsafe_global_rkey of the protection domain is no longer needed. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net/smc: introduce sg-logic for RMBsUrsula Braun
The follow-on patch makes use of ib_map_mr_sg() when introducing separate memory regions for RMBs. This function is based on scatterlists; thus this patch introduces scatterlists for RMBs. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net/smc: shorten local bufsize variablesUrsula Braun
Initiate the coming rework of SMC buffer handling with this small code cleanup. No functional changes here. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net/smc: serialize connection creation in all casesUrsula Braun
If a link group for a new server connection exists already, the mutex serializing the determination of link groups is given up early. The coming registration of memory regions benefits from the serialization as well, if the mutex is held till connection creation is finished. This patch postpones the unlocking of the link group creation mutex. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 14:05:44 +0000