| Age | Commit message (Collapse) | Author |
|---|
|
QoS Data Frames that were sent with a No Ack policy should be ignored by
the minstrel statistics. There will never be an Ack for these frames so
there is no way to draw conclusions about the success of the transmission.
Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de>
Link: https://lore.kernel.org/r/20210517120145.132814-1-borgers@mi.fu-berlin.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The "ap_info->tbtt_info_len" and "length" variables are the same value
but it is confusing how the names are mixed up. Let's use "length"
everywhere for consistency.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YJaMNzZENkYFAYQX@mwanda
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We no longer need to put any limits here, hardware will and
mac80211-hwsim can do whatever it likes. The reason we had
this was some accounting code (still mentioned in the comment)
but that code was deleted in commit c781944b71f8 ("cfg80211:
Remove unused cfg80211_can_use_iftype_chan()").
Link: https://lore.kernel.org/r/20210506221159.d1d61db1d31c.Iac4da68d54b9f1fdc18a03586bbe06aeb9515425@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Variable 'ret' is set to -ENODEV but this value is never read as it
is overwritten with a new value later on, hence it is a redundant
assignment and can be removed.
Clean up the following clang-analyzer warning:
net/mac80211/debugfs_netdev.c:60:2: warning: Value stored to 'ret' is
never read [clang-analyzer-deadcode.DeadStores]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1619774483-116805-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Variable 'ps' is set to wdev->ps but this value is never read as it is
overwritten with a new value later on, hence it is a redundant
assignment and can be removed.
Cleans up the following clang-analyzer warning:
net/wireless/wext-compat.c:1170:7: warning: Value stored to 'ps' during
its initialization is never read [clang-analyzer-deadcode.DeadStores]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1619603945-116891-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fix the following out-of-bounds warning:
net/wireless/wext-spy.c:178:2: warning: 'memcpy' offset [25, 28] from the object at 'threshold' is out of the bounds of referenced subobject 'low' with type 'struct iw_quality' at offset 20 [-Warray-bounds]
The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &threshold.low and &spydata->spy_thr_low. As
these are just a couple of struct members, fix this by using direct
assignments, instead of memcpy().
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422200032.GA168995@embeddedor
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Pablo Neira Ayuso says
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Nicolas Dichtel updates MAINTAINERS file to add Netfilter IRC channel.
2) Skip non-IPv6 packets in nft_exthdr.
3) Skip non-TCP packets in nft_osf.
4) Skip non-TCP/UDP packets in nft_tproxy.
5) Memleak in hardware offload infrastructure when counters are used
for first time in a rule.
6) The VLAN transfer routine must use FLOW_DISSECTOR_KEY_BASIC instead
of FLOW_DISSECTOR_KEY_CONTROL. Moreover, make a more robust check
for 802.1q and 802.1ad to restore simple matching on transport
protocols.
7) Fix bogus EPERM when listing a ruleset when table ownership flag
is set on.
8) Honor table ownership flag when table is referenced by handle.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The inner_ipproto saves the inner IP protocol of the plain
text packet. This allows vendor's IPsec feature making offload
decision at skb's features_check and configuring hardware at
ndo_start_xmit.
For example, ConnectX6-DX IPsec device needs the plaintext's
IP protocol to support partial checksum offload on
VXLAN/GENEVE packet over IPsec transport mode tunnel.
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Huy Nguyen <huyn@nvidia.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The current cleanup rbuf tries a bit too hard to avoid acquiring
the subflow socket lock. We may end-up delaying the needed ack,
or skip acking a blocked subflow.
Address the above extending the conditions used to trigger the cleanup
to reflect more closely what TCP does and invoking tcp_cleanup_rbuf()
on all the active subflows.
Note that we can't replicate the exact tests implemented in
tcp_cleanup_rbuf(), as MPTCP lacks some of the required info - e.g.
ping-pong mode.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch added a new flag named deny_join_id0 in struct
mptcp_options_received. Set it when MP_CAPABLE with the flag
MPTCP_CAP_DENYJOIN_ID0 is received.
Also add a new flag remote_deny_join_id0 in struct mptcp_pm_data. When the
flag deny_join_id0 is set, set this remote_deny_join_id0 flag.
In mptcp_pm_create_subflow_or_signal_addr, if the remote_deny_join_id0 flag
is set, and the remote address id is zero, stop this connection.
Suggested-by: Florian Westphal <fw@strlen.de>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch defined a new flag MPTCP_CAP_DENY_JOIN_ID0 for the third bit,
labeled "C" of the MP_CAPABLE option.
Add a new flag allow_join_id0 in struct mptcp_out_options. If this flag is
set, send out the MP_CAPABLE option with the flag MPTCP_CAP_DENY_JOIN_ID0.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch added a new sysctl, named allow_join_initial_addr_port, to
control whether allow peers to send join requests to the IP address and
port number used by the initial subflow.
Suggested-by: Florian Westphal <fw@strlen.de>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Previously, sctp over udp was using udp tunnel's icmp err process, which
only does sk lookup on sctp side. However for sctp's icmp error process,
there are more things to do, like syncing assoc pmtu/retransmit packets
for toobig type err, and starting proto_unreach_timer for unreach type
err etc.
Now after adding PLPMTUD, which also requires to process toobig type err
on sctp side. This patch is to process icmp err on sctp side by parsing
the type/code/info in .encap_err_lookup and call sctp's icmp processing
functions. Note as the 'redirect' err process needs to know the outer
ip(v6) header's, we have to leave it to udp(v6)_err to handle it.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to extract sctp_v4_err_handle() from sctp_v4_err() to
only handle the icmp err after the sock lookup, and it also makes
the code clearer.
sctp_v4_err_handle() will be used in sctp over udp's err handling
in the following patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to extract sctp_v6_err_handle() from sctp_v6_err() to
only handle the icmp err after the sock lookup, and it also makes
the code clearer.
sctp_v6_err_handle() will be used in sctp over udp's err handling
in the following patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Same as in tcp_v6_err() and __udp6_lib_err(), there's no need to
hold idev in sctp_v6_err(), so just call __in6_dev_get() instead.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sctp_transport_pl_reset() is called whenever any of these 3 members in
transport is changed:
- probe_interval
- param_flags & SPP_PMTUD_ENABLE
- state == ACTIVE
If all are true, start the PLPMTUD when it's not yet started. If any of
these is false, stop the PLPMTUD when it's already running.
sctp_transport_pl_update() is called when the transport dst has changed.
It will restart the PLPMTUD probe. Again, the pathmtu won't change but
use the dst's mtu until the Search phase is done.
Note that after using PLPMTUD, the pathmtu is only initialized with the
dst mtu when the transport dst changes. At other time it is updated by
pl.pmtu. So sctp_transport_pmtu_check() will be called only when PLPMTUD
is disabled in sctp_packet_config().
After this patch, the PLPMTUD feature from RFC8899 will be activated
and can be used by users.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PLPMTUD will short-circuit the old process for icmp TOOBIG packets.
This part is described in rfc8899#section-4.6.2 (PL_PTB_SIZE =
PTB_SIZE - other_headers_len). Note that from rfc8899#section-5.2
State Machine, each case below is for some specific states only:
a) PL_PTB_SIZE < MIN_PLPMTU || PL_PTB_SIZE >= PROBED_SIZE,
discard it, for any state
b) MIN_PLPMTU < PL_PTB_SIZE < BASE_PLPMTU,
Base -> Error, for Base state
c) BASE_PLPMTU <= PL_PTB_SIZE < PLPMTU,
Search -> Base or Complete -> Base, for Search and Complete states.
d) PLPMTU < PL_PTB_SIZE < PROBED_SIZE,
set pl.probe_size to PL_PTB_SIZE then verify it, for Search state.
The most important one is case d), which will help find the optimal
fast during searching. Like when pathmtu = 1392 for SCTP over IPv4,
the search will be (20 is iphdr_len):
1. probe with 1200 - 20
2. probe with 1232 - 20
3. probe with 1264 - 20
...
7. probe with 1388 - 20
8. probe with 1420 - 20
When sending the probe with 1420 - 20, TOOBIG may come with PL_PTB_SIZE =
1392 - 20. Then it matches case d), and saves some rounds to try with the
1392 - 20 probe. But of course, PLPMTUD doesn't trust TOOBIG packets, and
it will go back to the common searching once the probe with the new size
can't be verified.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As described in rfc8899#section-5.2, when a probe succeeds, there might
be the following state transitions:
- Base -> Search, occurs when probe succeeds with BASE_PLPMTU,
pl.pmtu is not changing,
pl.probe_size increases by SCTP_PL_BIG_STEP,
- Error -> Search, occurs when probe succeeds with BASE_PLPMTU,
pl.pmtu is changed from SCTP_MIN_PLPMTU to SCTP_BASE_PLPMTU,
pl.probe_size increases by SCTP_PL_BIG_STEP.
- Search -> Search Complete, occurs when probe succeeds with the probe
size SCTP_MAX_PLPMTU less than pl.probe_high,
pl.pmtu is not changing, but update *pathmtu* with it,
pl.probe_size is set back to pl.pmtu to double check it.
- Search Complete -> Search, occurs when probe succeeds with the probe
size equal to pl.pmtu,
pl.pmtu is not changing,
pl.probe_size increases by SCTP_PL_MIN_STEP.
So search process can be described as:
1. When it just enters 'Search' state, *pathmtu* is not updated with
pl.pmtu, and probe_size increases by a big step (SCTP_PL_BIG_STEP)
each round.
2. Until pl.probe_high is set when a probe fails, and probe_size
decreases back to pl.pmtu, as described in the last patch.
3. When the probe with the new size succeeds, probe_size changes to
increase by a small step (SCTP_PL_MIN_STEP) due to pl.probe_high
is set.
4. Until probe_size is next to pl.probe_high, the searching finishes and
it goes to 'Complete' state and updates *pathmtu* with pl.pmtu, and
then probe_size is set to pl.pmtu to confirm by once more probe.
5. This probe occurs after "30 * probe_inteval", a much longer time than
that in Search state. Once it is done it goes to 'Search' state again
with probe_size increased by SCTP_PL_MIN_STEP.
As we can see above, during the searching, pl.pmtu changes while *pathmtu*
doesn't. *pathmtu* is only updated when the search finishes by which it
gets an optimal value for it. A big step is used at the beginning until
it gets close to the optimal value, then it changes to a small step until
it has this optimal value.
The small step is also used in 'Complete' until it goes to 'Search' state
again and the probe with 'pmtu + the small step' succeeds, which means a
higher size could be used. Then probe_size changes to increase by a big
step again until it gets close to the next optimal value.
Note that anytime when black hole is detected, it goes directly to 'Base'
state with pl.pmtu set to SCTP_BASE_PLPMTU, as described in the last patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The state transition is described in rfc8899#section-5.2,
PROBE_COUNT == MAX_PROBES means the probe fails for MAX times, and the
state transition includes:
- Base -> Error, occurs when BASE_PLPMTU Confirmation Fails,
pl.pmtu is set to SCTP_MIN_PLPMTU,
probe_size is still SCTP_BASE_PLPMTU;
- Search -> Base, occurs when Black Hole Detected,
pl.pmtu is set to SCTP_BASE_PLPMTU,
probe_size is set back to SCTP_BASE_PLPMTU;
- Search Complete -> Base, occurs when Black Hole Detected
pl.pmtu is set to SCTP_BASE_PLPMTU,
probe_size is set back to SCTP_BASE_PLPMTU;
Note a black hole is encountered when a sender is unaware that packets
are not being delivered to the destination endpoint. So it includes the
probe failures with equal probe_size to pl.pmtu, and definitely not
include that with greater probe_size than pl.pmtu. The later one is the
normal probe failure where probe_size should decrease back to pl.pmtu
and pl.probe_high is set. pl.probe_high would be used on HB ACK recv
path in the next patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch does exactly what rfc8899#section-6.2.1.2 says:
The SCTP sender needs to be able to determine the total size of a
probe packet. The HEARTBEAT chunk could carry a Heartbeat
Information parameter that includes, besides the information
suggested in [RFC4960], the probe size to help an implementation
associate a HEARTBEAT ACK with the size of probe that was sent. The
sender could also use other methods, such as sending a nonce and
verifying the information returned also contains the corresponding
nonce. The length of the PAD chunk is computed by reducing the
probing size by the size of the SCTP common header and the HEARTBEAT
chunk.
Note that HB ACK chunk will carry back whatever HB chunk carried, including
the probe_size we put it in; We also check hbinfo->probe_size in the HB ACK
against link->pl.probe_size to validate this HB ACK chunk.
v1->v2:
- Remove the unused 'sp' and add static for sctp_packet_bundle_pad().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are 3 timers described in rfc8899#section-5.1.1:
PROBE_TIMER, PMTU_RAISE_TIMER, CONFIRMATION_TIMER
This patches adds a 'probe_timer' in transport, and it works as either
PROBE_TIMER or PMTU_RAISE_TIMER. At most time, it works as PROBE_TIMER
and expires every a 'probe_interval' time to send the HB probe packet.
When transport pl enters COMPLETE state, it works as PMTU_RAISE_TIMER
and expires in 'probe_interval * 30' time to go back to SEARCH state
and do searching again.
SCTP HB is an acknowledged packet, CONFIRMATION_TIMER is not needed.
The timer will start when transport pl enters BASE state and stop
when it enters DISABLED state.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With this socket option, users can change probe_interval for
a transport, asoc or sock after it's created.
Note that if the change is for an asoc, also apply the change
to each transport in this asoc.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PLPMTUD can be enabled by doing 'sysctl -w net.sctp.probe_interval=n'.
'n' is the interval for PLPMTUD probe timer in milliseconds, and it
can't be less than 5000 if it's not 0.
All asoc/transport's PLPMTUD in a new socket will be enabled by default.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This chunk is defined in rfc4820#section-3, and used to pad an
SCTP packet. The receiver must discard this chunk and continue
processing the rest of the chunks in the packet.
Add it now, as it will be bundled with a heartbeat chunk to probe
pmtu in the following patches.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This makes openvswitch module use the event tracing framework
to log the upcall interface and action execution pipeline. When
using openvswitch as the packet forwarding engine, some types of
debugging are made possible simply by using the ovs-vswitchd's
ofproto/trace command. However, such a command has some
limitations:
1. When trying to trace packets that go through the CT action,
the state of the packet can't be determined, and probably
would be potentially wrong.
2. Deducing problem packets can sometimes be difficult as well
even if many of the flows are known
3. It's possible to use the openvswitch module even without
the ovs-vswitchd (although, not common use).
Introduce the event tracing points here to make it possible for
working through these problems in kernel space. The style is
copied from the mac80211 driver-trace / trace code for
consistency - this creates some checkpatch splats, but the
official 'guide' for adding tracepoints, as well as the existing
examples all add the same splats so it seems acceptable.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Validate the offset to read from module EEPROM as part of the netlink
policy and remove the corresponding check from the code.
This also makes it possible to query the offset range from user space:
$ genl ctrl policy name ethtool
...
ID: 0x14 policy[32]:attr[2]: type=U32 range:[0,255]
...
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Validate the number of bytes to read from the module EEPROM as part of
the netlink policy and remove the corresponding check from the code.
This also makes it possible to query the length range from user space:
$ genl ctrl policy name ethtool
...
ID: 0x14 policy[32]:attr[3]: type=U32 range:[1,128]
...
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 'ETHTOOL_A_MODULE_EEPROM_DATA' attribute is not part of the get
request.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Return statements are not needed in Void function.
Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When doing source address validation, the flowi4 struct used for
fib_lookup should be in the reverse direction to the given skb.
fl4_dport and fl4_sport returned by fib4_rules_early_flow_dissect
should thus be swapped.
Fixes: 5a847a6e1477 ("net/ipv4: Initialize proto and ports in flow struct")
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 6c11fbf97e69 ("ip6_tunnel: add MPLS transmit support")
moved assiging inner_ipproto down from ipxip6_tnl_xmit() to
its callee ip6_tnl_xmit(). The latter is also used by GRE.
Since commit 38720352412a ("gre: Use inner_proto to obtain inner
header protocol") GRE had been depending on skb->inner_protocol
during segmentation. It sets it in gre_build_header() and reads
it in gre_gso_segment(). Changes to ip6_tnl_xmit() overwrite
the protocol, resulting in GSO skbs getting dropped.
Note that inner_protocol is a union with inner_ipproto,
GRE uses the former while the change switched it to the latter
(always setting it to just IPPROTO_GRE).
Restore the original location of skb_set_inner_ipproto(),
it is unclear why it was moved in the first place.
Fixes: 6c11fbf97e69 ("ip6_tunnel: add MPLS transmit support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit 7896248983ef ("mptcp: add skeleton to sync msk socket
options to subflows") introduced a duplicate declaration of
mptcp_setsockopt(), just drop it.
Reported-by: Florian Westphal <fw@strlen.de>
Fixes: 7896248983ef ("mptcp: add skeleton to sync msk socket options to subflows")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The msk socket state is currently updated in a few spots without
owning the msk socket lock itself.
Some of such operations are safe, as they happens before exposing
the msk socket to user-space and can't race with other changes.
A couple of them, at connect time, can actually race with close()
or shutdown(), leaving breaking the socket state machine.
This change addresses the issue moving such update under the msk
socket lock with the usual:
<acquire spinlock>
<check sk lock onwers>
<ev defer to release_cb>
scheme.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/56
Fixes: 8fd738049ac3 ("mptcp: fallback in case of simultaneous connect")
Fixes: c3c123d16c0e ("net: mptcp: don't hang in mptcp_sendmsg() after TCP fallback")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In 32-bit architecture, the result of sizeof() is a 32-bit integer so
the expression becomes the multiplication between 2 32-bit integer which
can potentially leads to integer overflow. As a result,
bpf_map_area_alloc() allocates less memory than needed.
Fix this by casting 1 operand to u64.
Fixes: 0d2c4f964050 ("bpf: Eliminate rlimit-based memory accounting for sockmap and sockhash maps")
Fixes: 99c51064fb06 ("devmap: Use bpf_map_area_alloc() for allocating hash buckets")
Fixes: 546ac1ffb70d ("bpf: add devmap, a map for storing net device references")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210613143440.71975-1-minhquangbui99@gmail.com
|
|
Account this exceptional events for better introspection.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently we check the msk state to avoid enqueuing new
skbs at msk shutdown time.
Such test is racy - as we can't acquire the msk socket lock -
and useless, as the caller already checked the subflow
field 'disposable', covering the same scenario in a race
free manner - read and updated under the ssk socket lock.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If we don't flush entirely the receive queue, we need set
again such bit later. We can simply avoid clearing it.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are a bunch of callsite where the ssk socket
lock is acquired using the full-blown version eligible for
the fast variant. Let's move to the latter.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mentioned cache was introduced to reduce the number of skb
allocation in atomic context, but the required complexity is
excessive.
This change remove the mentioned cache.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make sure the_virtio_vsock is not NULL before dereferencing it.
general protection fault, probably for non-canonical address 0xdffffc0000000071: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000388-0x000000000000038f]
CPU: 0 PID: 8452 Comm: syz-executor406 Not tainted 5.13.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:virtio_transport_seqpacket_allow+0xbf/0x210 net/vmw_vsock/virtio_transport.c:503
Code: e8 c6 d9 ab f8 84 db 0f 84 0f 01 00 00 e8 09 d3 ab f8 48 8d bd 88 03 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 2a 01 00 00 44 0f b6 a5 88 03 00 00
RSP: 0018:ffffc90003757c18 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: 0000000000000071 RSI: ffffffff88c908e7 RDI: 0000000000000388
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff88c90a06 R11: 0000000000000000 R12: 0000000000000000
R13: ffffffff88c90840 R14: 0000000000000000 R15: 0000000000000001
FS: 0000000001bee300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000082 CR3: 000000002847e000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
vsock_assign_transport+0x575/0x700 net/vmw_vsock/af_vsock.c:490
vsock_connect+0x200/0xc00 net/vmw_vsock/af_vsock.c:1337
__sys_connect_file+0x155/0x1a0 net/socket.c:1824
__sys_connect+0x161/0x190 net/socket.c:1841
__do_sys_connect net/socket.c:1851 [inline]
__se_sys_connect net/socket.c:1848 [inline]
__x64_sys_connect+0x6f/0xb0 net/socket.c:1848
do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x43ee69
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd49e7c788 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000400488 RCX: 000000000043ee69
RDX: 0000000000000010 RSI: 0000000020000080 RDI: 0000000000000003
RBP: 0000000000402e50 R08: 0000000000000000 R09: 0000000000400488
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000402ee0
R13: 0000000000000000 R14: 00000000004ac018 R15: 0000000000400488
Fixes: 53efbba12cc7 ("virtio/vsock: enable SEQPACKET for transport")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
nft_table_lookup_byhandle() also needs to validate the netlink PortID
owner when deleting a table by handle.
Fixes: 6001a930ce03 ("netfilter: nftables: introduce table ownership")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nft_table_lookup() allows us to obtain the table object by the name and
the family. The netlink portID validation needs to be skipped for the
dump path, since the ownership only applies to commands to update the
given table. Skip validation if the specified netlink PortID is zero
when calling nft_table_lookup().
Fixes: 6001a930ce03 ("netfilter: nftables: introduce table ownership")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In case of xfrm offload, if xdo_dev_state_add() of driver returns
-EOPNOTSUPP, xfrm offload fallback is failed.
In xfrm state_add() both xso->dev and xso->real_dev are initialized to
dev and when err(-EOPNOTSUPP) is returned only xso->dev is set to null.
So in this scenario the condition in func validate_xmit_xfrm(),
if ((x->xso.dev != dev) && (x->xso.real_dev == dev))
return skb;
returns true, due to which skb is returned without calling esp_xmit()
below which has fallback code. Hence the CRYPTO_FALLBACK is failing.
So fixing this with by keeping x->xso.real_dev as NULL when err is
returned in func xfrm_dev_state_add().
Fixes: bdfd2d1fa79a ("bonding/xfrm: use real_dev instead of slave_dev")
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
If qfq_change_class() is unable to allocate memory for qfq_aggregate,
it frees the class that has been inserted in the class hash table,
but does not unhash it.
Defer the insertion after the problematic allocation.
BUG: KASAN: use-after-free in hlist_add_head include/linux/list.h:884 [inline]
BUG: KASAN: use-after-free in qdisc_class_hash_insert+0x200/0x210 net/sched/sch_api.c:731
Write of size 8 at addr ffff88814a534f10 by task syz-executor.4/31478
CPU: 0 PID: 31478 Comm: syz-executor.4 Not tainted 5.13.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:233
__kasan_report mm/kasan/report.c:419 [inline]
kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:436
hlist_add_head include/linux/list.h:884 [inline]
qdisc_class_hash_insert+0x200/0x210 net/sched/sch_api.c:731
qfq_change_class+0x96c/0x1990 net/sched/sch_qfq.c:489
tc_ctl_tclass+0x514/0xe50 net/sched/sch_api.c:2113
rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5564
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1929
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x4665d9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fdc7b5f0188 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 000000000056bf80 RCX: 00000000004665d9
RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003
RBP: 00007fdc7b5f01d0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002
R13: 00007ffcf7310b3f R14: 00007fdc7b5f0300 R15: 0000000000022000
Allocated by task 31445:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:38
kasan_set_track mm/kasan/common.c:46 [inline]
set_alloc_info mm/kasan/common.c:428 [inline]
____kasan_kmalloc mm/kasan/common.c:507 [inline]
____kasan_kmalloc mm/kasan/common.c:466 [inline]
__kasan_kmalloc+0x9b/0xd0 mm/kasan/common.c:516
kmalloc include/linux/slab.h:556 [inline]
kzalloc include/linux/slab.h:686 [inline]
qfq_change_class+0x705/0x1990 net/sched/sch_qfq.c:464
tc_ctl_tclass+0x514/0xe50 net/sched/sch_api.c:2113
rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5564
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1929
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 31445:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:38
kasan_set_track+0x1c/0x30 mm/kasan/common.c:46
kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:357
____kasan_slab_free mm/kasan/common.c:360 [inline]
____kasan_slab_free mm/kasan/common.c:325 [inline]
__kasan_slab_free+0xfb/0x130 mm/kasan/common.c:368
kasan_slab_free include/linux/kasan.h:212 [inline]
slab_free_hook mm/slub.c:1583 [inline]
slab_free_freelist_hook+0xdf/0x240 mm/slub.c:1608
slab_free mm/slub.c:3168 [inline]
kfree+0xe5/0x7f0 mm/slub.c:4212
qfq_change_class+0x10fb/0x1990 net/sched/sch_qfq.c:518
tc_ctl_tclass+0x514/0xe50 net/sched/sch_api.c:2113
rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5564
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1929
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff88814a534f00
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 16 bytes inside of
128-byte region [ffff88814a534f00, ffff88814a534f80)
The buggy address belongs to the page:
page:ffffea0005294d00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14a534
flags: 0x57ff00000000200(slab|node=1|zone=2|lastcpupid=0x7ff)
raw: 057ff00000000200 ffffea00004fee00 0000000600000006 ffff8880110418c0
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x12cc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY), pid 29797, ts 604817765317, free_ts 604810151744
prep_new_page mm/page_alloc.c:2358 [inline]
get_page_from_freelist+0x1033/0x2b60 mm/page_alloc.c:3994
__alloc_pages+0x1b2/0x500 mm/page_alloc.c:5200
alloc_pages+0x18c/0x2a0 mm/mempolicy.c:2272
alloc_slab_page mm/slub.c:1646 [inline]
allocate_slab+0x2c5/0x4c0 mm/slub.c:1786
new_slab mm/slub.c:1849 [inline]
new_slab_objects mm/slub.c:2595 [inline]
___slab_alloc+0x4a1/0x810 mm/slub.c:2758
__slab_alloc.constprop.0+0xa7/0xf0 mm/slub.c:2798
slab_alloc_node mm/slub.c:2880 [inline]
slab_alloc mm/slub.c:2922 [inline]
__kmalloc+0x315/0x330 mm/slub.c:4050
kmalloc include/linux/slab.h:561 [inline]
kzalloc include/linux/slab.h:686 [inline]
__register_sysctl_table+0x112/0x1090 fs/proc/proc_sysctl.c:1318
mpls_dev_sysctl_register+0x1b7/0x2d0 net/mpls/af_mpls.c:1421
mpls_add_dev net/mpls/af_mpls.c:1472 [inline]
mpls_dev_notify+0x214/0x8b0 net/mpls/af_mpls.c:1588
notifier_call_chain+0xb5/0x200 kernel/notifier.c:83
call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2121
call_netdevice_notifiers_extack net/core/dev.c:2133 [inline]
call_netdevice_notifiers net/core/dev.c:2147 [inline]
register_netdevice+0x106b/0x1500 net/core/dev.c:10312
veth_newlink+0x585/0xac0 drivers/net/veth.c:1547
__rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3452
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3500
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1298 [inline]
free_pcp_prepare+0x223/0x300 mm/page_alloc.c:1342
free_unref_page_prepare mm/page_alloc.c:3250 [inline]
free_unref_page+0x12/0x1d0 mm/page_alloc.c:3298
__vunmap+0x783/0xb60 mm/vmalloc.c:2566
free_work+0x58/0x70 mm/vmalloc.c:80
process_one_work+0x98d/0x1600 kernel/workqueue.c:2276
worker_thread+0x64c/0x1120 kernel/workqueue.c:2422
kthread+0x3b1/0x4a0 kernel/kthread.c:313
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
Memory state around the buggy address:
ffff88814a534e00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88814a534e80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88814a534f00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88814a534f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88814a535000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Fixes: 462dbc9101acd ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 0dca2c7404a938cb10c85d0515cee40ed5348788.
The commit in question breaks hardware offload of flower filters.
Quoting Vladimir Oltean <olteanv@gmail.com>:
fl_hw_replace_filter() and fl_reoffload() create a struct
flow_cls_offload with a rule->match.mask member derived from the mask
of the software classifier: &f->mask->key - that same mask that is used
for initializing the flow dissector keys, and the one from which Boris
removed the basic.n_proto member because it was bothering him.
Reported-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The client's sk_state will be set to TCP_ESTABLISHED if the server
replay the client's connect request.
However, if the client has pending signal, its sk_state will be set
to TCP_CLOSE without notify the server, so the server will hold the
corrupt connection.
client server
1. sk_state=TCP_SYN_SENT |
2. call ->connect() |
3. wait reply |
| 4. sk_state=TCP_ESTABLISHED
| 5. insert to connected list
| 6. reply to the client
7. sk_state=TCP_ESTABLISHED |
8. insert to connected list |
9. *signal pending* <--------------------- the user kill client
10. sk_state=TCP_CLOSE |
client is exiting... |
11. call ->release() |
virtio_transport_close
if (!(sk->sk_state == TCP_ESTABLISHED ||
sk->sk_state == TCP_CLOSING))
return true; *return at here, the server cannot notice the connection is corrupt*
So the client should notify the peer in this case.
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jorgen Hansen <jhansen@vmware.com>
Cc: Norbert Slusarek <nslusarek@gmx.net>
Cc: Andra Paraschiv <andraprs@amazon.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Brazdil <dbrazdil@google.com>
Cc: Alexander Popov <alex.popov@linux.com>
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lkml.org/lkml/2021/5/17/418
Signed-off-by: lixianming <lixianming5@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Modify the pr_info content from int to char * in sock_register() and
sock_unregister(), this looks more readable.
Fixed build error in ARCH=sparc64.
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current implementation of 32 bit DSN expansion is buggy.
After the previous patch, we can simply reuse the newly
introduced helper to do the expansion safely.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/120
Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When receiving 32 bits DSS ack from the peer, the MPTCP need
to expand them to 64 bits value. The current code is buggy
WRT detecting 32 bits ack wrap-around: when the wrap-around
happens the current unsigned 32 bit ack value is lower than
the previous one.
Additionally check for possible reverse wrap and make the helper
visible, so that we could re-use it for the next patch.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/204
Fixes: cc9d25669866 ("mptcp: update per unacked sequence on pkt reception")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
