| Age | Commit message (Collapse) | Author |
|---|
|
commit e598d8981fd34470b78a1ae777dbf131b15d5bf2 upstream.
The Fixes commit mentioned this:
> An MPTCP firewall blackhole can be detected if the following SYN
> retransmission after a fallback to "plain" TCP is accepted.
But in fact, this blackhole was detected if any following SYN
retransmissions after a fallback to TCP was accepted.
That's because 'mptcp_subflow_early_fallback()' will set 'request_mptcp'
to 0, and 'mpc_drop' will never be reset to 0 after.
This is an issue, because some not so unusual situations might cause the
kernel to detect a false-positive blackhole, e.g. a client trying to
connect to a server while the network is not ready yet, causing a few
SYN retransmissions, before reaching the end server.
Fixes: 27069e7cb3d1 ("mptcp: disable active MPTCP in case of blackhole")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 619af16b3b57a3a4ee50b9a30add9ff155541e71 upstream.
Syzbot was able to trigger a data stream corruption:
WARNING: CPU: 0 PID: 9846 at net/mptcp/protocol.c:1024 __mptcp_clean_una+0xddb/0xff0 net/mptcp/protocol.c:1024
Modules linked in:
CPU: 0 UID: 0 PID: 9846 Comm: syz-executor351 Not tainted 6.13.0-rc2-syzkaller-00059-g00a5acdbf398 #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024
RIP: 0010:__mptcp_clean_una+0xddb/0xff0 net/mptcp/protocol.c:1024
Code: fa ff ff 48 8b 4c 24 18 80 e1 07 fe c1 38 c1 0f 8c 8e fa ff ff 48 8b 7c 24 18 e8 e0 db 54 f6 e9 7f fa ff ff e8 e6 80 ee f5 90 <0f> 0b 90 4c 8b 6c 24 40 4d 89 f4 e9 04 f5 ff ff 44 89 f1 80 e1 07
RSP: 0018:ffffc9000c0cf400 EFLAGS: 00010293
RAX: ffffffff8bb0dd5a RBX: ffff888033f5d230 RCX: ffff888059ce8000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc9000c0cf518 R08: ffffffff8bb0d1dd R09: 1ffff110170c8928
R10: dffffc0000000000 R11: ffffed10170c8929 R12: 0000000000000000
R13: ffff888033f5d220 R14: dffffc0000000000 R15: ffff8880592b8000
FS: 00007f6e866496c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6e86f491a0 CR3: 00000000310e6000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__mptcp_clean_una_wakeup+0x7f/0x2d0 net/mptcp/protocol.c:1074
mptcp_release_cb+0x7cb/0xb30 net/mptcp/protocol.c:3493
release_sock+0x1aa/0x1f0 net/core/sock.c:3640
inet_wait_for_connect net/ipv4/af_inet.c:609 [inline]
__inet_stream_connect+0x8bd/0xf30 net/ipv4/af_inet.c:703
mptcp_sendmsg_fastopen+0x2a2/0x530 net/mptcp/protocol.c:1755
mptcp_sendmsg+0x1884/0x1b10 net/mptcp/protocol.c:1830
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x1a6/0x270 net/socket.c:726
____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583
___sys_sendmsg net/socket.c:2637 [inline]
__sys_sendmsg+0x269/0x350 net/socket.c:2669
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f6e86ebfe69
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 1f 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6e86649168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f6e86f491b8 RCX: 00007f6e86ebfe69
RDX: 0000000030004001 RSI: 0000000020000080 RDI: 0000000000000003
RBP: 00007f6e86f491b0 R08: 00007f6e866496c0 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6e86f491bc
R13: 000000000000006e R14: 00007ffe445d9420 R15: 00007ffe445d9508
</TASK>
The root cause is the bad handling of disconnect() generated internally
by the MPTCP protocol in case of connect FASTOPEN errors.
Address the issue increasing the socket disconnect counter even on such
a case, to allow other threads waiting on the same socket lock to
properly error out.
Fixes: c2b2ae3925b6 ("mptcp: handle correctly disconnect() failures")
Cc: stable@vger.kernel.org
Reported-by: syzbot+ebc0b8ae5d3590b2c074@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/67605870.050a0220.37aaf.0137.GAE@google.com
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/537
Tested-by: syzbot+ebc0b8ae5d3590b2c074@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250123-net-mptcp-syzbot-issues-v1-3-af73258a726f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1bb0d1348546ad059f55c93def34e67cb2a034a6 upstream.
With the in-kernel path-manager, it is possible to change the 'fullmesh'
flag. The code in mptcp_pm_nl_fullmesh() expects to change it only on
'subflow' endpoints, to recreate more or less subflows using the linked
address.
Unfortunately, the set_flags() hook was a bit more permissive, and
allowed 'implicit' endpoints to get the 'fullmesh' flag while it is not
allowed before.
That's what syzbot found, triggering the following warning:
WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 __mark_subflow_endp_available net/mptcp/pm_netlink.c:1496 [inline]
WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_pm_nl_fullmesh net/mptcp/pm_netlink.c:1980 [inline]
WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_nl_set_flags net/mptcp/pm_netlink.c:2003 [inline]
WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_pm_nl_set_flags+0x974/0xdc0 net/mptcp/pm_netlink.c:2064
Modules linked in:
CPU: 0 UID: 0 PID: 6499 Comm: syz.1.413 Not tainted 6.13.0-rc5-syzkaller-00172-gd1bf27c4e176 #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_netlink.c:1496 [inline]
RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_netlink.c:1980 [inline]
RIP: 0010:mptcp_nl_set_flags net/mptcp/pm_netlink.c:2003 [inline]
RIP: 0010:mptcp_pm_nl_set_flags+0x974/0xdc0 net/mptcp/pm_netlink.c:2064
Code: 01 00 00 49 89 c5 e8 fb 45 e8 f5 e9 b8 fc ff ff e8 f1 45 e8 f5 4c 89 f7 be 03 00 00 00 e8 44 1d 0b f9 eb a0 e8 dd 45 e8 f5 90 <0f> 0b 90 e9 17 ff ff ff 89 d9 80 e1 07 38 c1 0f 8c c9 fc ff ff 48
RSP: 0018:ffffc9000d307240 EFLAGS: 00010293
RAX: ffffffff8bb72e03 RBX: 0000000000000000 RCX: ffff88807da88000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc9000d307430 R08: ffffffff8bb72cf0 R09: 1ffff1100b842a5e
R10: dffffc0000000000 R11: ffffed100b842a5f R12: ffff88801e2e5ac0
R13: ffff88805c214800 R14: ffff88805c2152e8 R15: 1ffff1100b842a5d
FS: 00005555619f6500(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020002840 CR3: 00000000247e6000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2542
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline]
netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1347
netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1891
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:726
____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583
___sys_sendmsg net/socket.c:2637 [inline]
__sys_sendmsg+0x269/0x350 net/socket.c:2669
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5fe8785d29
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff571f5558 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f5fe8975fa0 RCX: 00007f5fe8785d29
RDX: 0000000000000000 RSI: 0000000020000480 RDI: 0000000000000007
RBP: 00007f5fe8801b08 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f5fe8975fa0 R14: 00007f5fe8975fa0 R15: 00000000000011f4
</TASK>
Here, syzbot managed to set the 'fullmesh' flag on an 'implicit' and
used -- according to 'id_avail_bitmap' -- endpoint, causing the PM to
try decrement the local_addr_used counter which is only incremented for
the 'subflow' endpoint.
Note that 'no type' endpoints -- not 'subflow', 'signal', 'implicit' --
are fine, because their ID will not be marked as used in the 'id_avail'
bitmap, and setting 'fullmesh' can help forcing the creation of subflow
when receiving an ADD_ADDR.
Fixes: 73c762c1f07d ("mptcp: set fullmesh flag in pm_netlink")
Cc: stable@vger.kernel.org
Reported-by: syzbot+cd16e79c1e45f3fe0377@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/6786ac51.050a0220.216c54.00a6.GAE@google.com
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/540
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250123-net-mptcp-syzbot-issues-v1-2-af73258a726f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c86b000782daba926c627d2fa00c3f60a75e7472 upstream.
MPTCP maintains the received sub-options status is the bitmask carrying
the received suboptions and in several bitfields carrying per suboption
additional info.
Zeroing the bitmask before parsing is not enough to ensure a consistent
status, and the MPTCP code has to additionally clear some bitfiled
depending on the actually parsed suboption.
The above schema is fragile, and syzbot managed to trigger a path where
a relevant bitfield is not cleared/initialized:
BUG: KMSAN: uninit-value in __mptcp_expand_seq net/mptcp/options.c:1030 [inline]
BUG: KMSAN: uninit-value in mptcp_expand_seq net/mptcp/protocol.h:864 [inline]
BUG: KMSAN: uninit-value in ack_update_msk net/mptcp/options.c:1060 [inline]
BUG: KMSAN: uninit-value in mptcp_incoming_options+0x2036/0x3d30 net/mptcp/options.c:1209
__mptcp_expand_seq net/mptcp/options.c:1030 [inline]
mptcp_expand_seq net/mptcp/protocol.h:864 [inline]
ack_update_msk net/mptcp/options.c:1060 [inline]
mptcp_incoming_options+0x2036/0x3d30 net/mptcp/options.c:1209
tcp_data_queue+0xb4/0x7be0 net/ipv4/tcp_input.c:5233
tcp_rcv_established+0x1061/0x2510 net/ipv4/tcp_input.c:6264
tcp_v4_do_rcv+0x7f3/0x11a0 net/ipv4/tcp_ipv4.c:1916
tcp_v4_rcv+0x51df/0x5750 net/ipv4/tcp_ipv4.c:2351
ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:460 [inline]
ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:447
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:567
__netif_receive_skb_one_core net/core/dev.c:5704 [inline]
__netif_receive_skb+0x319/0xa00 net/core/dev.c:5817
process_backlog+0x4ad/0xa50 net/core/dev.c:6149
__napi_poll+0xe7/0x980 net/core/dev.c:6902
napi_poll net/core/dev.c:6971 [inline]
net_rx_action+0xa5a/0x19b0 net/core/dev.c:7093
handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561
__do_softirq+0x14/0x1a kernel/softirq.c:595
do_softirq+0x9a/0x100 kernel/softirq.c:462
__local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:389
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline]
__dev_queue_xmit+0x2758/0x57d0 net/core/dev.c:4493
dev_queue_xmit include/linux/netdevice.h:3168 [inline]
neigh_hh_output include/net/neighbour.h:523 [inline]
neigh_output include/net/neighbour.h:537 [inline]
ip_finish_output2+0x187c/0x1b70 net/ipv4/ip_output.c:236
__ip_finish_output+0x287/0x810
ip_finish_output+0x4b/0x600 net/ipv4/ip_output.c:324
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip_output+0x15f/0x3f0 net/ipv4/ip_output.c:434
dst_output include/net/dst.h:450 [inline]
ip_local_out net/ipv4/ip_output.c:130 [inline]
__ip_queue_xmit+0x1f2a/0x20d0 net/ipv4/ip_output.c:536
ip_queue_xmit+0x60/0x80 net/ipv4/ip_output.c:550
__tcp_transmit_skb+0x3cea/0x4900 net/ipv4/tcp_output.c:1468
tcp_transmit_skb net/ipv4/tcp_output.c:1486 [inline]
tcp_write_xmit+0x3b90/0x9070 net/ipv4/tcp_output.c:2829
__tcp_push_pending_frames+0xc4/0x380 net/ipv4/tcp_output.c:3012
tcp_send_fin+0x9f6/0xf50 net/ipv4/tcp_output.c:3618
__tcp_close+0x140c/0x1550 net/ipv4/tcp.c:3130
__mptcp_close_ssk+0x74e/0x16f0 net/mptcp/protocol.c:2496
mptcp_close_ssk+0x26b/0x2c0 net/mptcp/protocol.c:2550
mptcp_pm_nl_rm_addr_or_subflow+0x635/0xd10 net/mptcp/pm_netlink.c:889
mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:924 [inline]
mptcp_pm_flush_addrs_and_subflows net/mptcp/pm_netlink.c:1688 [inline]
mptcp_nl_flush_addrs_list net/mptcp/pm_netlink.c:1709 [inline]
mptcp_pm_nl_flush_addrs_doit+0xe10/0x1630 net/mptcp/pm_netlink.c:1750
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x1214/0x12c0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2542
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline]
netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1347
netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1891
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:726
____sys_sendmsg+0x877/0xb60 net/socket.c:2583
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2637
__sys_sendmsg net/socket.c:2669 [inline]
__do_sys_sendmsg net/socket.c:2674 [inline]
__se_sys_sendmsg net/socket.c:2672 [inline]
__x64_sys_sendmsg+0x212/0x3c0 net/socket.c:2672
x64_sys_call+0x2ed6/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was stored to memory at:
mptcp_get_options+0x2c0f/0x2f20 net/mptcp/options.c:397
mptcp_incoming_options+0x19a/0x3d30 net/mptcp/options.c:1150
tcp_data_queue+0xb4/0x7be0 net/ipv4/tcp_input.c:5233
tcp_rcv_established+0x1061/0x2510 net/ipv4/tcp_input.c:6264
tcp_v4_do_rcv+0x7f3/0x11a0 net/ipv4/tcp_ipv4.c:1916
tcp_v4_rcv+0x51df/0x5750 net/ipv4/tcp_ipv4.c:2351
ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:460 [inline]
ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:447
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:567
__netif_receive_skb_one_core net/core/dev.c:5704 [inline]
__netif_receive_skb+0x319/0xa00 net/core/dev.c:5817
process_backlog+0x4ad/0xa50 net/core/dev.c:6149
__napi_poll+0xe7/0x980 net/core/dev.c:6902
napi_poll net/core/dev.c:6971 [inline]
net_rx_action+0xa5a/0x19b0 net/core/dev.c:7093
handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561
__do_softirq+0x14/0x1a kernel/softirq.c:595
Uninit was stored to memory at:
put_unaligned_be32 include/linux/unaligned.h:68 [inline]
mptcp_write_options+0x17f9/0x3100 net/mptcp/options.c:1417
mptcp_options_write net/ipv4/tcp_output.c:465 [inline]
tcp_options_write+0x6d9/0xe90 net/ipv4/tcp_output.c:759
__tcp_transmit_skb+0x294b/0x4900 net/ipv4/tcp_output.c:1414
tcp_transmit_skb net/ipv4/tcp_output.c:1486 [inline]
tcp_write_xmit+0x3b90/0x9070 net/ipv4/tcp_output.c:2829
__tcp_push_pending_frames+0xc4/0x380 net/ipv4/tcp_output.c:3012
tcp_send_fin+0x9f6/0xf50 net/ipv4/tcp_output.c:3618
__tcp_close+0x140c/0x1550 net/ipv4/tcp.c:3130
__mptcp_close_ssk+0x74e/0x16f0 net/mptcp/protocol.c:2496
mptcp_close_ssk+0x26b/0x2c0 net/mptcp/protocol.c:2550
mptcp_pm_nl_rm_addr_or_subflow+0x635/0xd10 net/mptcp/pm_netlink.c:889
mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:924 [inline]
mptcp_pm_flush_addrs_and_subflows net/mptcp/pm_netlink.c:1688 [inline]
mptcp_nl_flush_addrs_list net/mptcp/pm_netlink.c:1709 [inline]
mptcp_pm_nl_flush_addrs_doit+0xe10/0x1630 net/mptcp/pm_netlink.c:1750
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x1214/0x12c0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2542
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline]
netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1347
netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1891
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:726
____sys_sendmsg+0x877/0xb60 net/socket.c:2583
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2637
__sys_sendmsg net/socket.c:2669 [inline]
__do_sys_sendmsg net/socket.c:2674 [inline]
__se_sys_sendmsg net/socket.c:2672 [inline]
__x64_sys_sendmsg+0x212/0x3c0 net/socket.c:2672
x64_sys_call+0x2ed6/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was stored to memory at:
mptcp_pm_add_addr_signal+0x3d7/0x4c0
mptcp_established_options_add_addr net/mptcp/options.c:666 [inline]
mptcp_established_options+0x1b9b/0x3a00 net/mptcp/options.c:884
tcp_established_options+0x2c4/0x7d0 net/ipv4/tcp_output.c:1012
__tcp_transmit_skb+0x5b7/0x4900 net/ipv4/tcp_output.c:1333
tcp_transmit_skb net/ipv4/tcp_output.c:1486 [inline]
tcp_write_xmit+0x3b90/0x9070 net/ipv4/tcp_output.c:2829
__tcp_push_pending_frames+0xc4/0x380 net/ipv4/tcp_output.c:3012
tcp_send_fin+0x9f6/0xf50 net/ipv4/tcp_output.c:3618
__tcp_close+0x140c/0x1550 net/ipv4/tcp.c:3130
__mptcp_close_ssk+0x74e/0x16f0 net/mptcp/protocol.c:2496
mptcp_close_ssk+0x26b/0x2c0 net/mptcp/protocol.c:2550
mptcp_pm_nl_rm_addr_or_subflow+0x635/0xd10 net/mptcp/pm_netlink.c:889
mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:924 [inline]
mptcp_pm_flush_addrs_and_subflows net/mptcp/pm_netlink.c:1688 [inline]
mptcp_nl_flush_addrs_list net/mptcp/pm_netlink.c:1709 [inline]
mptcp_pm_nl_flush_addrs_doit+0xe10/0x1630 net/mptcp/pm_netlink.c:1750
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x1214/0x12c0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2542
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline]
netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1347
netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1891
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:726
____sys_sendmsg+0x877/0xb60 net/socket.c:2583
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2637
__sys_sendmsg net/socket.c:2669 [inline]
__do_sys_sendmsg net/socket.c:2674 [inline]
__se_sys_sendmsg net/socket.c:2672 [inline]
__x64_sys_sendmsg+0x212/0x3c0 net/socket.c:2672
x64_sys_call+0x2ed6/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was stored to memory at:
mptcp_pm_add_addr_received+0x95f/0xdd0 net/mptcp/pm.c:235
mptcp_incoming_options+0x2983/0x3d30 net/mptcp/options.c:1169
tcp_data_queue+0xb4/0x7be0 net/ipv4/tcp_input.c:5233
tcp_rcv_state_process+0x2a38/0x49d0 net/ipv4/tcp_input.c:6972
tcp_v4_do_rcv+0xbf9/0x11a0 net/ipv4/tcp_ipv4.c:1939
tcp_v4_rcv+0x51df/0x5750 net/ipv4/tcp_ipv4.c:2351
ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:460 [inline]
ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:447
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:567
__netif_receive_skb_one_core net/core/dev.c:5704 [inline]
__netif_receive_skb+0x319/0xa00 net/core/dev.c:5817
process_backlog+0x4ad/0xa50 net/core/dev.c:6149
__napi_poll+0xe7/0x980 net/core/dev.c:6902
napi_poll net/core/dev.c:6971 [inline]
net_rx_action+0xa5a/0x19b0 net/core/dev.c:7093
handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561
__do_softirq+0x14/0x1a kernel/softirq.c:595
Local variable mp_opt created at:
mptcp_incoming_options+0x119/0x3d30 net/mptcp/options.c:1127
tcp_data_queue+0xb4/0x7be0 net/ipv4/tcp_input.c:5233
The current schema is too fragile; address the issue grouping all the
state-related data together and clearing the whole group instead of
just the bitmask. This also cleans-up the code a bit, as there is no
need to individually clear "random" bitfield in a couple of places
any more.
Fixes: 84dfe3677a6f ("mptcp: send out dedicated ADD_ADDR packet")
Cc: stable@vger.kernel.org
Reported-by: syzbot+23728c2df58b3bd175ad@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/6786ac51.050a0220.216c54.00a7.GAE@google.com
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/541
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250123-net-mptcp-syzbot-issues-v1-1-af73258a726f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1b9335a8000fb70742f7db10af314104b6ace220 upstream.
The field length description provides the length of each separated key
field in the concatenation, each field gets rounded up to 32-bits to
calculate the pipapo rule width from pipapo_init(). The set key length
provides the total size of the key aligned to 32-bits.
Register-based arithmetics still allows for combining mismatching set
key length and field length description, eg. set key length 10 and field
description [ 5, 4 ] leading to pipapo width of 12.
Cc: stable@vger.kernel.org
Fixes: 3ce67e3793f4 ("netfilter: nf_tables: do not allow mismatch field size and set key length")
Reported-by: Noam Rathaus <noamr@ssd-disclosure.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 966a675da844f1a764bb44557c21561cc3d09840 upstream.
I noticed that a handful of NFSv3 fstests were taking an
unexpectedly long time to run. Troubleshooting showed that the
server's TCP window closed and never re-opened, which caused the
client to trigger an RPC retransmit timeout after 180 seconds.
The client's recovery action was to establish a fresh connection
and retransmit the timed-out requests. This worked, but it adds a
long delay.
I tracked the problem to the commit that attempted to reduce the
rate at which the network layer delivers TCP socket data_ready
callbacks. Under most circumstances this change worked as expected,
but for NFSv3, which has no session or other type of throttling, it
can overwhelm the receiver on occasion.
I'm sure I could tweak the lowat settings, but the small benefit
doesn't seem worth the bother. Just revert it.
Fixes: 2b877fc53e97 ("SUNRPC: Reduce thread wake-up rate when receiving large RPC messages")
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0f5697f1a3f99bc2b674b8aa3c5da822c5673c11 ]
Stephan Wurm reported that my recent patch broke VLAN support.
Apparently skb->mac_len is not correct for VLAN traffic as
shown by debug traces [1].
Use instead pskb_may_pull() to make sure the expected header
is present in skb->head.
Many thanks to Stephan for his help.
[1]
kernel: skb len=170 headroom=2 headlen=170 tailroom=20
mac=(2,14) mac_len=14 net=(16,-1) trans=-1
shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0))
csum(0x0 start=0 offset=0 ip_summed=0 complete_sw=0 valid=0 level=0)
hash(0x0 sw=0 l4=0) proto=0x0000 pkttype=0 iif=0
priority=0x0 mark=0x0 alloc_cpu=0 vlan_all=0x0
encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0)
kernel: dev name=prp0 feat=0x0000000000007000
kernel: sk family=17 type=3 proto=0
kernel: skb headroom: 00000000: 74 00
kernel: skb linear: 00000000: 01 0c cd 01 00 01 00 d0 93 53 9c cb 81 00 80 00
kernel: skb linear: 00000010: 88 b8 00 01 00 98 00 00 00 00 61 81 8d 80 16 52
kernel: skb linear: 00000020: 45 47 44 4e 43 54 52 4c 2f 4c 4c 4e 30 24 47 4f
kernel: skb linear: 00000030: 24 47 6f 43 62 81 01 14 82 16 52 45 47 44 4e 43
kernel: skb linear: 00000040: 54 52 4c 2f 4c 4c 4e 30 24 44 73 47 6f 6f 73 65
kernel: skb linear: 00000050: 83 07 47 6f 49 64 65 6e 74 84 08 67 8d f5 93 7e
kernel: skb linear: 00000060: 76 c8 00 85 01 01 86 01 00 87 01 00 88 01 01 89
kernel: skb linear: 00000070: 01 00 8a 01 02 ab 33 a2 15 83 01 00 84 03 03 00
kernel: skb linear: 00000080: 00 91 08 67 8d f5 92 77 4b c6 1f 83 01 00 a2 1a
kernel: skb linear: 00000090: a2 06 85 01 00 83 01 00 84 03 03 00 00 91 08 67
kernel: skb linear: 000000a0: 8d f5 92 77 4b c6 1f 83 01 00
kernel: skb tailroom: 00000000: 80 18 02 00 fe 4e 00 00 01 01 08 0a 4f fd 5e d1
kernel: skb tailroom: 00000010: 4f fd 5e cd
Fixes: b9653d19e556 ("net: hsr: avoid potential out-of-bound access in fill_frame_info()")
Reported-by: Stephan Wurm <stephan.wurm@a-eberle.de>
Tested-by: Stephan Wurm <stephan.wurm@a-eberle.de>
Closes: https://lore.kernel.org/netdev/Z4o_UC0HweBHJ_cw@PC-LX-SteWu/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250129130007.644084-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3595599fa8360bb3c7afa7ee50c810b4a64106ea ]
Device-bound programs are used to support RX metadata kfuncs. These
kfuncs are driver-specific and rely on the driver context to read the
metadata. This means they can't work in generic XDP mode. However, there
is no check to disallow such programs from being attached in generic
mode, in which case the metadata kfuncs will be called in an invalid
context, leading to crashes.
Fix this by adding a check to disallow attaching device-bound programs
in generic mode.
Fixes: 2b3486bc2d23 ("bpf: Introduce device-bound XDP programs")
Reported-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Closes: https://lore.kernel.org/r/dae862ec-43b5-41a0-8edf-46c59071cdda@hetzner-cloud.de
Tested-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250127131344.238147-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8c670bdfa58e48abad1d5b6ca1ee843ca91f7303 ]
Testing with iperf3 using the "pasta" protocol splicer has revealed
a problem in the way tcp handles window advertising in extreme memory
squeeze situations.
Under memory pressure, a socket endpoint may temporarily advertise
a zero-sized window, but this is not stored as part of the socket data.
The reasoning behind this is that it is considered a temporary setting
which shouldn't influence any further calculations.
However, if we happen to stall at an unfortunate value of the current
window size, the algorithm selecting a new value will consistently fail
to advertise a non-zero window once we have freed up enough memory.
This means that this side's notion of the current window size is
different from the one last advertised to the peer, causing the latter
to not send any data to resolve the sitution.
The problem occurs on the iperf3 server side, and the socket in question
is a completely regular socket with the default settings for the
fedora40 kernel. We do not use SO_PEEK or SO_RCVBUF on the socket.
The following excerpt of a logging session, with own comments added,
shows more in detail what is happening:
// tcp_v4_rcv(->)
// tcp_rcv_established(->)
[5201<->39222]: ==== Activating log @ net/ipv4/tcp_input.c/tcp_data_queue()/5257 ====
[5201<->39222]: tcp_data_queue(->)
[5201<->39222]: DROPPING skb [265600160..265665640], reason: SKB_DROP_REASON_PROTO_MEM
[rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184]
[copied_seq 259909392->260034360 (124968), unread 5565800, qlen 85, ofoq 0]
[OFO queue: gap: 65480, len: 0]
[5201<->39222]: tcp_data_queue(<-)
[5201<->39222]: __tcp_transmit_skb(->)
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
[5201<->39222]: tcp_select_window(->)
[5201<->39222]: (inet_csk(sk)->icsk_ack.pending & ICSK_ACK_NOMEM) ? --> TRUE
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
returning 0
[5201<->39222]: tcp_select_window(<-)
[5201<->39222]: ADVERTISING WIN 0, ACK_SEQ: 265600160
[5201<->39222]: [__tcp_transmit_skb(<-)
[5201<->39222]: tcp_rcv_established(<-)
[5201<->39222]: tcp_v4_rcv(<-)
// Receive queue is at 85 buffers and we are out of memory.
// We drop the incoming buffer, although it is in sequence, and decide
// to send an advertisement with a window of zero.
// We don't update tp->rcv_wnd and tp->rcv_wup accordingly, which means
// we unconditionally shrink the window.
[5201<->39222]: tcp_recvmsg_locked(->)
[5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160
[5201<->39222]: [new_win = 0, win_now = 131184, 2 * win_now = 262368]
[5201<->39222]: [new_win >= (2 * win_now) ? --> time_to_ack = 0]
[5201<->39222]: NOT calling tcp_send_ack()
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
[5201<->39222]: __tcp_cleanup_rbuf(<-)
[rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184]
[copied_seq 260040464->260040464 (0), unread 5559696, qlen 85, ofoq 0]
returning 6104 bytes
[5201<->39222]: tcp_recvmsg_locked(<-)
// After each read, the algorithm for calculating the new receive
// window in __tcp_cleanup_rbuf() finds it is too small to advertise
// or to update tp->rcv_wnd.
// Meanwhile, the peer thinks the window is zero, and will not send
// any more data to trigger an update from the interrupt mode side.
[5201<->39222]: tcp_recvmsg_locked(->)
[5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160
[5201<->39222]: [new_win = 262144, win_now = 131184, 2 * win_now = 262368]
[5201<->39222]: [new_win >= (2 * win_now) ? --> time_to_ack = 0]
[5201<->39222]: NOT calling tcp_send_ack()
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
[5201<->39222]: __tcp_cleanup_rbuf(<-)
[rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184]
[copied_seq 260099840->260171536 (71696), unread 5428624, qlen 83, ofoq 0]
returning 131072 bytes
[5201<->39222]: tcp_recvmsg_locked(<-)
// The above pattern repeats again and again, since nothing changes
// between the reads.
[...]
[5201<->39222]: tcp_recvmsg_locked(->)
[5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160
[5201<->39222]: [new_win = 262144, win_now = 131184, 2 * win_now = 262368]
[5201<->39222]: [new_win >= (2 * win_now) ? --> time_to_ack = 0]
[5201<->39222]: NOT calling tcp_send_ack()
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
[5201<->39222]: __tcp_cleanup_rbuf(<-)
[rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184]
[copied_seq 265600160->265600160 (0), unread 0, qlen 0, ofoq 0]
returning 54672 bytes
[5201<->39222]: tcp_recvmsg_locked(<-)
// The receive queue is empty, but no new advertisement has been sent.
// The peer still thinks the receive window is zero, and sends nothing.
// We have ended up in a deadlock situation.
Note that well behaved endpoints will send win0 probes, so the problem
will not occur.
Furthermore, we have observed that in these situations this side may
send out an updated 'th->ack_seq´ which is not stored in tp->rcv_wup
as it should be. Backing ack_seq seems to be harmless, but is of
course still wrong from a protocol viewpoint.
We fix this by updating the socket state correctly when a packet has
been dropped because of memory exhaustion and we have to advertize
a zero window.
Further testing shows that the connection recovers neatly from the
squeeze situation, and traffic can continue indefinitely.
Fixes: e2142825c120 ("net: tcp: send zero-window ACK when no memory")
Cc: Menglong Dong <menglong8.dong@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250127231304.1465565-1-jmaloy@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aa388c72113b7458127b709bdd7d3628af26e9b4 ]
sk_err is set when a (connectible) connect() fails. Effectively, this makes
an otherwise still healthy SS_UNCONNECTED socket impossible to use for any
subsequent connection attempts.
Clear sk_err upon trying to establish a connection.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-2-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4f5a52adeb1ad675ca33f1e1eacd9c0bbaf393d4 ]
The sanity check that both source and destination are set when symmetric
RSS hash is requested is only relevant for ETHTOOL_SRXFH (rx-flow-hash),
it should not be performed on any other commands (e.g.
ETHTOOL_SRXCLSRLINS/ETHTOOL_SRXCLSRLDEL).
This resolves accessing uninitialized 'info.data' field, and fixes false
errors in rule insertion:
# ethtool --config-ntuple eth2 flow-type ip4 dst-ip 255.255.255.255 action -1 loc 0
rmgr: Cannot insert RX class rule: Invalid argument
Cannot insert classification rule
Fixes: 13e59344fb9d ("net: ethtool: add support for symmetric-xor RSS hash")
Cc: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20250126191845.316589-1-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 79d458c13056559d49b5e41fbc4b6890e68cf65b ]
In its address list, afs now retains pointers to and refs on one or more
rxrpc_peer objects. The address list is freed under RCU and at this time,
it puts the refs on those peers.
Now, when an rxrpc_peer object runs out of refs, it gets removed from the
peer hash table and, for that, rxrpc has to take a spinlock. However, it
is now being called from afs's RCU cleanup, which takes place in BH
context - but it is just taking an ordinary spinlock.
The put may also be called from non-BH context, and so there exists the
possibility of deadlock if the BH-based RCU cleanup happens whilst the hash
spinlock is held. This led to the attached lockdep complaint.
Fix this by changing spinlocks of rxnet->peer_hash_lock back to
BH-disabling locks.
================================
WARNING: inconsistent lock state
6.13.0-rc5-build2+ #1223 Tainted: G E
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/1/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
ffff88810babe228 (&rxnet->peer_hash_lock){+.?.}-{3:3}, at: rxrpc_put_peer+0xcb/0x180
{SOFTIRQ-ON-W} state was registered at:
mark_usage+0x164/0x180
__lock_acquire+0x544/0x990
lock_acquire.part.0+0x103/0x280
_raw_spin_lock+0x2f/0x40
rxrpc_peer_keepalive_worker+0x144/0x440
process_one_work+0x486/0x7c0
process_scheduled_works+0x73/0x90
worker_thread+0x1c8/0x2a0
kthread+0x19b/0x1b0
ret_from_fork+0x24/0x40
ret_from_fork_asm+0x1a/0x30
irq event stamp: 972402
hardirqs last enabled at (972402): [<ffffffff8244360e>] _raw_spin_unlock_irqrestore+0x2e/0x50
hardirqs last disabled at (972401): [<ffffffff82443328>] _raw_spin_lock_irqsave+0x18/0x60
softirqs last enabled at (972300): [<ffffffff810ffbbe>] handle_softirqs+0x3ee/0x430
softirqs last disabled at (972313): [<ffffffff810ffc54>] __irq_exit_rcu+0x44/0x110
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&rxnet->peer_hash_lock);
<Interrupt>
lock(&rxnet->peer_hash_lock);
*** DEADLOCK ***
1 lock held by swapper/1/0:
#0: ffffffff83576be0 (rcu_callback){....}-{0:0}, at: rcu_lock_acquire+0x7/0x30
stack backtrace:
CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Tainted: G E 6.13.0-rc5-build2+ #1223
Tainted: [E]=UNSIGNED_MODULE
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x57/0x80
print_usage_bug.part.0+0x227/0x240
valid_state+0x53/0x70
mark_lock_irq+0xa5/0x2f0
mark_lock+0xf7/0x170
mark_usage+0xe1/0x180
__lock_acquire+0x544/0x990
lock_acquire.part.0+0x103/0x280
_raw_spin_lock+0x2f/0x40
rxrpc_put_peer+0xcb/0x180
afs_free_addrlist+0x46/0x90 [kafs]
rcu_do_batch+0x2d2/0x640
rcu_core+0x2f7/0x350
handle_softirqs+0x1ee/0x430
__irq_exit_rcu+0x44/0x110
irq_exit_rcu+0xa/0x30
sysvec_apic_timer_interrupt+0x7f/0xa0
</IRQ>
Fixes: 72904d7b9bfb ("rxrpc, afs: Allow afs to pin rxrpc_peer objects")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/2095618.1737622752@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 67e4bb2ced0f2d8fbd414f932daea94ba63ae4c4 ]
Page ppol tried to cache the NAPI ID in page pool info to avoid
having a dependency on the life cycle of the NAPI instance.
Since commit under Fixes the NAPI ID is not populated until
napi_enable() and there's a good chance that page pool is
created before NAPI gets enabled.
Protect the NAPI pointer with the existing page pool mutex,
the reading path already holds it. napi_id itself we need
to READ_ONCE(), it's protected by netdev_lock() which are
not holding in page pool.
Before this patch napi IDs were missing for mlx5:
# ./cli.py --spec netlink/specs/netdev.yaml --dump page-pool-get
[{'id': 144, 'ifindex': 2, 'inflight': 3072, 'inflight-mem': 12582912},
{'id': 143, 'ifindex': 2, 'inflight': 5568, 'inflight-mem': 22806528},
{'id': 142, 'ifindex': 2, 'inflight': 5120, 'inflight-mem': 20971520},
{'id': 141, 'ifindex': 2, 'inflight': 4992, 'inflight-mem': 20447232},
...
After:
[{'id': 144, 'ifindex': 2, 'inflight': 3072, 'inflight-mem': 12582912,
'napi-id': 565},
{'id': 143, 'ifindex': 2, 'inflight': 4224, 'inflight-mem': 17301504,
'napi-id': 525},
{'id': 142, 'ifindex': 2, 'inflight': 4288, 'inflight-mem': 17563648,
'napi-id': 524},
...
Fixes: 86e25f40aa1e ("net: napi: Add napi_config")
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250123231620.1086401-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5de7665e0a0746b5ad7943554b34db8f8614a196 ]
Rose timers only acquire the socket spinlock, without
checking if the socket is owned by one user thread.
Add a check and rearm the timers if needed.
BUG: KASAN: slab-use-after-free in rose_timer_expiry+0x31d/0x360 net/rose/rose_timer.c:174
Read of size 2 at addr ffff88802f09b82a by task swapper/0/0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5-syzkaller-00172-gd1bf27c4e176 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x169/0x550 mm/kasan/report.c:489
kasan_report+0x143/0x180 mm/kasan/report.c:602
rose_timer_expiry+0x31d/0x360 net/rose/rose_timer.c:174
call_timer_fn+0x187/0x650 kernel/time/timer.c:1793
expire_timers kernel/time/timer.c:1844 [inline]
__run_timers kernel/time/timer.c:2418 [inline]
__run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2430
run_timer_base kernel/time/timer.c:2439 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2449
handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:561
__do_softirq kernel/softirq.c:595 [inline]
invoke_softirq kernel/softirq.c:435 [inline]
__irq_exit_rcu+0xf7/0x220 kernel/softirq.c:662
irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1049
</IRQ>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250122180244.1861468-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 05d91cdb1f9108426b14975ef4eeddf15875ca05 ]
Copy of the rationale from 790071347a0a1a89e618eedcd51c687ea783aeb3:
Change ndo_set_mac_address to dev_set_mac_address because
dev_set_mac_address provides a way to notify network layer about MAC
change. In other case, services may not aware about MAC change and keep
using old one which set from network adapter driver.
As example, DHCP client from systemd do not update MAC address without
notification from net subsystem which leads to the problem with acquiring
the right address from DHCP server.
Since dev_set_mac_address requires RTNL lock the operation can not be
performed directly in the response handler, see
9e2bbab94b88295dcc57c7580393c9ee08d7314d.
The way of selecting the first suitable MAC address from the list is
changed, instead of having the driver check it this patch just assumes
any valid MAC should be good.
Fixes: b8291cf3d118 ("net/ncsi: Add NC-SI 1.2 Get MC MAC Address command")
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6c9b7db96db62ee9ad8d359d90ff468d462518c4 ]
For the state cache lookup xfrm_input_state_lookup() first disables
preemption, to remain on the CPU and then retrieves a per-CPU pointer.
Within the preempt-disable section it also acquires
netns_xfrm::xfrm_state_lock, a spinlock_t. This lock must not be
acquired with explicit disabled preemption (such as by get_cpu())
because this lock becomes a sleeping lock on PREEMPT_RT.
To remain on the same CPU is just an optimisation for the CPU local
lookup. The actual modification of the per-CPU variable happens with
netns_xfrm::xfrm_state_lock acquired.
Remove get_cpu() and use the state_cache_input on the current CPU.
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Closes: https://lore.kernel.org/all/CAADnVQKkCLaj=roayH=Mjiiqz_svdf1tsC3OE4EC0E=mAD+L1A@mail.gmail.com/
Fixes: 81a331a0e72dd ("xfrm: Add an inbound percpu state cache.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 15a901361ec3fb1c393f91880e1cbf24ec0a88bd ]
syzbot found that calling mr_mfc_uses_dev() for unres entries
would crash [1], because c->mfc_un.res.minvif / c->mfc_un.res.maxvif
alias to "struct sk_buff_head unresolved", which contain two pointers.
This code never worked, lets remove it.
[1]
Unable to handle kernel paging request at virtual address ffff5fff2d536613
KASAN: maybe wild-memory-access in range [0xfffefff96a9b3098-0xfffefff96a9b309f]
Modules linked in:
CPU: 1 UID: 0 PID: 7321 Comm: syz.0.16 Not tainted 6.13.0-rc7-syzkaller-g1950a0af2d55 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mr_mfc_uses_dev net/ipv4/ipmr_base.c:290 [inline]
pc : mr_table_dump+0x5a4/0x8b0 net/ipv4/ipmr_base.c:334
lr : mr_mfc_uses_dev net/ipv4/ipmr_base.c:289 [inline]
lr : mr_table_dump+0x694/0x8b0 net/ipv4/ipmr_base.c:334
Call trace:
mr_mfc_uses_dev net/ipv4/ipmr_base.c:290 [inline] (P)
mr_table_dump+0x5a4/0x8b0 net/ipv4/ipmr_base.c:334 (P)
mr_rtm_dumproute+0x254/0x454 net/ipv4/ipmr_base.c:382
ipmr_rtm_dumproute+0x248/0x4b4 net/ipv4/ipmr.c:2648
rtnl_dump_all+0x2e4/0x4e8 net/core/rtnetlink.c:4327
rtnl_dumpit+0x98/0x1d0 net/core/rtnetlink.c:6791
netlink_dump+0x4f0/0xbc0 net/netlink/af_netlink.c:2317
netlink_recvmsg+0x56c/0xe64 net/netlink/af_netlink.c:1973
sock_recvmsg_nosec net/socket.c:1033 [inline]
sock_recvmsg net/socket.c:1055 [inline]
sock_read_iter+0x2d8/0x40c net/socket.c:1125
new_sync_read fs/read_write.c:484 [inline]
vfs_read+0x740/0x970 fs/read_write.c:565
ksys_read+0x15c/0x26c fs/read_write.c:708
Fixes: cb167893f41e ("net: Plumb support for filtering ipv4 and ipv6 multicast route dumps")
Reported-by: syzbot+5cfae50c0e5f2c500013@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/678fe2d1.050a0220.15cac.00b3.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250121181241.841212-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e952837f3ddb0ff726d5b582aa1aad9aa38d024d ]
lookup and resize can run in parallel.
The xfrm_state_hash_generation seqlock ensures a retry, but the hash
functions can observe a hmask value that is too large for the new hlist
array.
rehash does:
rcu_assign_pointer(net->xfrm.state_bydst, ndst) [..]
net->xfrm.state_hmask = nhashmask;
While state lookup does:
h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, encap_family);
hlist_for_each_entry_rcu(x, net->xfrm.state_bydst + h, bydst) {
This is only safe in case the update to state_bydst is larger than
net->xfrm.xfrm_state_hmask (or if the lookup function gets
serialized via state spinlock again).
Fix this by prefetching state_hmask and the associated pointers.
The xfrm_state_hash_generation seqlock retry will ensure that the pointer
and the hmask will be consistent.
The existing helpers, like xfrm_dst_hash(), are now unsafe for RCU side,
add lockdep assertions to document that they are only safe for insert
side.
xfrm_state_lookup_byaddr() uses the spinlock rather than RCU.
AFAICS this is an oversight from back when state lookup was converted to
RCU, this lock should be replaced with RCU in a future patch.
Reported-by: syzbot+5f9f31cb7d985f584d8e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/CACT4Y+azwfrE3uz6A5ZErov5YN2LYBN5KrsymBerT36VU8qzBA@mail.gmail.com/
Diagnosed-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: c2f672fc9464 ("xfrm: state lookup can be lockless")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c05c5e5aa163f4682ca97a2f0536575fc7dbdecb ]
When skb needs GSO and wrap around happens, if xo->seq.low (seqno of
the first skb segment) is before the last seq number but oseq (seqno
of the last segment) is after it, xo->seq.low is still bigger than
replay_esn->oseq while oseq is smaller than it, so the update of
replay_esn->oseq_hi is missed for this case wrap around because of
the change in the cited commit.
For example, if sending a packet with gso_segs=3 while old
replay_esn->oseq=0xfffffffe, we calculate:
xo->seq.low = 0xfffffffe + 1 = 0x0xffffffff
oseq = 0xfffffffe + 3 = 0x1
(oseq < replay_esn->oseq) is true, but (xo->seq.low <
replay_esn->oseq) is false, so replay_esn->oseq_hi is not incremented.
To fix this issue, change the outer checking back for the update of
replay_esn->oseq_hi. And add new checking inside for the update of
packet's oseq_hi.
Fixes: 4b549ccce941 ("xfrm: replay: Fix ESN wrap around for GSO")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8ac412a3361173e3000b16167af3d1f6f90af613 ]
MEM_WRITE attribute is defined as: "Non-presence of MEM_WRITE means that
MEM is only being read". bpf_load_hdr_opt() both reads and writes from
its arg2 - void *search_res.
This matters a lot for the next commit where we more precisely track
stack accesses. Without this annotation, the verifier will make false
assumptions about the contents of memory written to by helpers and
possibly prune valid branches.
Fixes: 6fad274f06f0 ("bpf: Add MEM_WRITE attribute")
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/730e45f8c39be2a5f3d8c4406cceca9d574cbf14.1736886479.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d640627663bfe7d8963c7615316d7d4ef60f3b0b ]
In case of possible unpredictably large arguments passed to
rose_setsockopt() and multiplied by extra values on top of that,
integer overflows may occur.
Do the safest minimum and fix these issues by checking the
contents of 'opt' and returning -EINVAL if they are too large. Also,
switch to unsigned int and remove useless check for negative 'opt'
in ROSE_IDLE case.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250115164220.19954-1-n.zhandarovich@fintech.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 25c1a9ca53db5780757e7f53e688b8f916821baa ]
I noticed that HyStart incorrectly marks the start of rounds,
leading to inaccurate measurements of ACK train lengths and
resetting the `ca->sample_cnt` variable. This inaccuracy can impact
HyStart's functionality in terminating exponential cwnd growth during
Slow-Start, potentially degrading TCP performance.
The issue arises because the changes introduced in commit 4e1fddc98d25
("tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows")
moved the caller of the `bictcp_hystart_reset` function inside the `hystart_update` function.
This modification added an additional condition for triggering the caller,
requiring that (tcp_snd_cwnd(tp) >= hystart_low_window) must also
be satisfied before invoking `bictcp_hystart_reset`.
This fix ensures that `bictcp_hystart_reset` is correctly called
at the start of a new round, regardless of the congestion window size.
This is achieved by moving the condition
(tcp_snd_cwnd(tp) >= hystart_low_window)
from before calling `bictcp_hystart_reset` to after it.
I tested with a client and a server connected through two Linux software routers.
In this setup, the minimum RTT was 150 ms, the bottleneck bandwidth was 50 Mbps,
and the bottleneck buffer size was 1 BDP, calculated as (50M / 1514 / 8) * 0.150 = 619 packets.
I conducted the test twice, transferring data from the server to the client for 1.5 seconds.
Before the patch was applied, HYSTART-DELAY stopped the exponential growth of cwnd when
cwnd = 516, and the bottleneck link was not yet saturated (516 < 619).
After the patch was applied, HYSTART-ACK-TRAIN stopped the exponential growth of cwnd when
cwnd = 632, and the bottleneck link was saturated (632 > 619).
In this test, applying the patch resulted in 300 KB more data delivered.
Fixes: 4e1fddc98d25 ("tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows")
Signed-off-by: Mahdi Arghavani <ma.arghavani@yahoo.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Haibo Zhang <haibo.zhang@otago.ac.nz>
Cc: David Eyers <david.eyers@otago.ac.nz>
Cc: Abbas Arghavani <abbas.arghavani@mdu.se>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a12c76a03386e32413ae8eaaefa337e491880632 ]
This patch addresses issues with filter counting in block (tcf_block),
particularly for software bypass scenarios, by introducing a more
accurate mechanism using useswcnt.
Previously, filtercnt and skipswcnt were introduced by:
Commit 2081fd3445fe ("net: sched: cls_api: add filter counter") and
Commit f631ef39d819 ("net: sched: cls_api: add skip_sw counter")
filtercnt tracked all tp (tcf_proto) objects added to a block, and
skipswcnt counted tp objects with the skipsw attribute set.
The problem is: a single tp can contain multiple filters, some with skipsw
and others without. The current implementation fails in the case:
When the first filter in a tp has skipsw, both skipswcnt and filtercnt
are incremented, then adding a second filter without skipsw to the same
tp does not modify these counters because tp->counted is already set.
This results in bypass software behavior based solely on skipswcnt
equaling filtercnt, even when the block includes filters without
skipsw. Consequently, filters without skipsw are inadvertently bypassed.
To address this, the patch introduces useswcnt in block to explicitly count
tp objects containing at least one filter without skipsw. Key changes
include:
Whenever a filter without skipsw is added, its tp is marked with usesw
and counted in useswcnt. tc_run() now uses useswcnt to determine software
bypass, eliminating reliance on filtercnt and skipswcnt.
This refined approach prevents software bypass for blocks containing
mixed filters, ensuring correct behavior in tc_run().
Additionally, as atomic operations on useswcnt ensure thread safety and
tp->lock guards access to tp->usesw and tp->counted, the broader lock
down_write(&block->cb_lock) is no longer required in tc_new_tfilter(),
and this resolves a performance regression caused by the filter counting
mechanism during parallel filter insertions.
The improvement can be demonstrated using the following script:
# cat insert_tc_rules.sh
tc qdisc add dev ens1f0np0 ingress
for i in $(seq 16); do
taskset -c $i tc -b rules_$i.txt &
done
wait
Each of rules_$i.txt files above includes 100000 tc filter rules to a
mlx5 driver NIC ens1f0np0.
Without this patch:
# time sh insert_tc_rules.sh
real 0m50.780s
user 0m23.556s
sys 4m13.032s
With this patch:
# time sh insert_tc_rules.sh
real 0m17.718s
user 0m7.807s
sys 3m45.050s
Fixes: 047f340b36fc ("net: sched: make skip_sw actually skip software")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7a4b61406395291ffb7220a10e8951a9a8684819 ]
The conntrack entry is already public, there is a small chance that another
CPU is handling a packet in reply direction and racing with the tcp state
update.
Move this under ct spinlock.
This is done once, when ct is about to be offloaded, so this should
not result in a noticeable performance hit.
Fixes: 8437a6209f76 ("netfilter: nft_flow_offload: set liberal tracking mode for tcp")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8d738c1869f611955d91d8d0fd0012d9ef207201 ]
The existing rbtree implementation uses singleton elements to represent
ranges, however, userspace provides a set size according to the number
of ranges in the set.
Adjust provided userspace set size to the number of singleton elements
in the kernel by multiplying the range by two.
Check if the no-match all-zero element is already in the set, in such
case release one slot in the set size.
Fixes: 0ed6389c483d ("netfilter: nf_tables: rename set implementations")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bc50835e83f60f56e9bec2b392fb5544f250fb6f ]
Lion Ackermann was able to create a UAF which can be abused for privilege
escalation with the following script
Step 1. create root qdisc
tc qdisc add dev lo root handle 1:0 drr
step2. a class for packet aggregation do demonstrate uaf
tc class add dev lo classid 1:1 drr
step3. a class for nesting
tc class add dev lo classid 1:2 drr
step4. a class to graft qdisc to
tc class add dev lo classid 1:3 drr
step5.
tc qdisc add dev lo parent 1:1 handle 2:0 plug limit 1024
step6.
tc qdisc add dev lo parent 1:2 handle 3:0 drr
step7.
tc class add dev lo classid 3:1 drr
step 8.
tc qdisc add dev lo parent 3:1 handle 4:0 pfifo
step 9. Display the class/qdisc layout
tc class ls dev lo
class drr 1:1 root leaf 2: quantum 64Kb
class drr 1:2 root leaf 3: quantum 64Kb
class drr 3:1 root leaf 4: quantum 64Kb
tc qdisc ls
qdisc drr 1: dev lo root refcnt 2
qdisc plug 2: dev lo parent 1:1
qdisc pfifo 4: dev lo parent 3:1 limit 1000p
qdisc drr 3: dev lo parent 1:2
step10. trigger the bug <=== prevented by this patch
tc qdisc replace dev lo parent 1:3 handle 4:0
step 11. Redisplay again the qdiscs/classes
tc class ls dev lo
class drr 1:1 root leaf 2: quantum 64Kb
class drr 1:2 root leaf 3: quantum 64Kb
class drr 1:3 root leaf 4: quantum 64Kb
class drr 3:1 root leaf 4: quantum 64Kb
tc qdisc ls
qdisc drr 1: dev lo root refcnt 2
qdisc plug 2: dev lo parent 1:1
qdisc pfifo 4: dev lo parent 3:1 refcnt 2 limit 1000p
qdisc drr 3: dev lo parent 1:2
Observe that a) parent for 4:0 does not change despite the replace request.
There can only be one parent. b) refcount has gone up by two for 4:0 and
c) both class 1:3 and 3:1 are pointing to it.
Step 12. send one packet to plug
echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10001))
step13. send one packet to the grafted fifo
echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10003))
step14. lets trigger the uaf
tc class delete dev lo classid 1:3
tc class delete dev lo classid 1:1
The semantics of "replace" is for a del/add _on the same node_ and not
a delete from one node(3:1) and add to another node (1:3) as in step10.
While we could "fix" with a more complex approach there could be
consequences to expectations so the patch takes the preventive approach of
"disallow such config".
Joint work with Lion Ackermann <nnamrec@gmail.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250116013713.900000-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 12e070eb6964b341b41677fd260af5a305316a1f ]
The following trace can be seen if a device is being unregistered while
its number of channels are being modified.
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 3 PID: 3754 at kernel/locking/mutex.c:564 __mutex_lock+0xc8a/0x1120
CPU: 3 UID: 0 PID: 3754 Comm: ethtool Not tainted 6.13.0-rc6+ #771
RIP: 0010:__mutex_lock+0xc8a/0x1120
Call Trace:
<TASK>
ethtool_check_max_channel+0x1ea/0x880
ethnl_set_channels+0x3c3/0xb10
ethnl_default_set_doit+0x306/0x650
genl_family_rcv_msg_doit+0x1e3/0x2c0
genl_rcv_msg+0x432/0x6f0
netlink_rcv_skb+0x13d/0x3b0
genl_rcv+0x28/0x40
netlink_unicast+0x42e/0x720
netlink_sendmsg+0x765/0xc20
__sys_sendto+0x3ac/0x420
__x64_sys_sendto+0xe0/0x1c0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
This is because unregister_netdevice_many_notify might run before the
rtnl lock section of ethnl operations, eg. set_channels in the above
example. In this example the rss lock would be destroyed by the device
unregistration path before being used again, but in general running
ethnl operations while dismantle has started is not a good idea.
Fix this by denying any operation on devices being unregistered. A check
was already there in ethnl_ops_begin, but not wide enough.
Note that the same issue cannot be seen on the ioctl version
(__dev_ethtool) because the device reference is retrieved from within
the rtnl lock section there. Once dismantle started, the net device is
unlisted and no reference will be found.
Fixes: dde91ccfa25f ("ethtool: do not perform operations on net devices being unregistered")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250116092159.50890-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d1f9f79fa2af8e3b45cffdeef66e05833480148a ]
The following problem was encountered during stability test:
(NULL net_device): NAPI poll function process_backlog+0x0/0x530 \
returned 1, exceeding its budget of 0.
------------[ cut here ]------------
list_add double add: new=ffff88905f746f48, prev=ffff88905f746f48, \
next=ffff88905f746e40.
WARNING: CPU: 18 PID: 5462 at lib/list_debug.c:35 \
__list_add_valid_or_report+0xf3/0x130
CPU: 18 UID: 0 PID: 5462 Comm: ping Kdump: loaded Not tainted 6.13.0-rc7+
RIP: 0010:__list_add_valid_or_report+0xf3/0x130
Call Trace:
? __warn+0xcd/0x250
? __list_add_valid_or_report+0xf3/0x130
enqueue_to_backlog+0x923/0x1070
netif_rx_internal+0x92/0x2b0
__netif_rx+0x15/0x170
loopback_xmit+0x2ef/0x450
dev_hard_start_xmit+0x103/0x490
__dev_queue_xmit+0xeac/0x1950
ip_finish_output2+0x6cc/0x1620
ip_output+0x161/0x270
ip_push_pending_frames+0x155/0x1a0
raw_sendmsg+0xe13/0x1550
__sys_sendto+0x3bf/0x4e0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x5b/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The reproduction command is as follows:
sysctl -w net.core.dev_weight=0
ping 127.0.0.1
This is because when the napi's weight is set to 0, process_backlog() may
return 0 and clear the NAPI_STATE_SCHED bit of napi->state, causing this
napi to be re-polled in net_rx_action() until __do_softirq() times out.
Since the NAPI_STATE_SCHED bit has been cleared, napi_schedule_rps() can
be retriggered in enqueue_to_backlog(), causing this issue.
Making the napi's weight always non-zero solves this problem.
Triggering this issue requires system-wide admin (setting is
not namespaced).
Fixes: e38766054509 ("[NET]: Fix sysctl net.core.dev_weight")
Fixes: 3d48b53fb2ae ("net: dev_weight: TX/RX orthogonality")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://patch.msgid.link/20250116143053.4146855-1-liujian56@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e361560a7912958ba3059f51e7dd21612d119169 ]
The cited commit forgot to add netdev_rename_lock in one of the
error paths in dev_change_name().
Let's hold netdev_rename_lock before restoring the old dev->name.
Fixes: 0840556e5a3a ("net: Protect dev->name by seqlock.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250115095545.52709-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3440fa34ad99d471f1085bc2f4dedeaebc310261 ]
Following fields of 'struct mr_mfc' can be updated
concurrently (no lock protection) from ip_mr_forward()
and ip6_mr_forward()
- bytes
- pkt
- wrong_if
- lastuse
They also can be read from other functions.
Convert bytes, pkt and wrong_if to atomic_long_t,
and use READ_ONCE()/WRITE_ONCE() for lastuse.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250114221049.1190631-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1a0d24775cdee2b8dc14bfa4f4418c930ab1ac57 ]
In 'cfg80211_scan_6ghz()', an instances of 'struct cfg80211_colocated_ap'
are allocated as if they would have 'ssid' as trailing VLA member. Since
this is not so, extra IEEE80211_MAX_SSID_LEN bytes are not needed.
Briefly tested with KUnit.
Fixes: c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20250113155417.552587-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a4b6539038c1aa1ae871aacf6e41b566c3613993 ]
When recvmsg with MSG_PEEK flag, the data will be copied to
user's buffer without advancing consume cursor and without
reducing the length of rx available data. Once the expected
peek length is larger than the value of bytes_to_rcv, in the
loop of do while in smc_rx_recvmsg, the first loop will copy
bytes_to_rcv bytes of data from the position local_tx_ctrl.cons,
the second loop will copy the min(bytes_to_rcv, read_remaining)
bytes from the position local_tx_ctrl.cons again because of the
lacking of process with advancing consume cursor and reducing
the length of available data. So do the subsequent loops. The
data copied in the second loop and the subsequent loops will
result in data error, as it should not be copied if no more data
arrives and it should be copied from the position advancing
bytes_to_rcv bytes from the local_tx_ctrl.cons if more data arrives.
This issue can be reproduce by the following python script:
server.py:
import socket
import time
server_ip = '0.0.0.0'
server_port = 12346
server_socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
server_socket.bind((server_ip, server_port))
server_socket.listen(1)
print('Server is running and listening for connections...')
conn, addr = server_socket.accept()
print('Connected by', addr)
while True:
data = conn.recv(1024)
if not data:
break
print('Received request:', data.decode())
conn.sendall(b'Hello, client!\n')
time.sleep(5)
conn.sendall(b'Hello, again!\n')
conn.close()
client.py:
import socket
server_ip = '<server ip>'
server_port = 12346
resp=b'Hello, client!\nHello, again!\n'
client_socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
client_socket.connect((server_ip, server_port))
request = 'Hello, server!'
client_socket.sendall(request.encode())
peek_data = client_socket.recv(len(resp),
socket.MSG_PEEK | socket.MSG_WAITALL)
print('Peeked data:', peek_data.decode())
client_socket.close()
Fixes: 952310ccf2d8 ("smc: receive data from RMBE")
Reported-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Link: https://patch.msgid.link/20250104143201.35529-1-guangguan.wang@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aa3ce3f8fafa0b8fb062f28024855ea8cb3f3450 ]
If STA state is pre-moved to AUTHORIZED (such as in IBSS
scenarios) and insertion fails, the station is freed.
In this case, the driver never knew about the station,
so trying to flush it is unexpected and may crash.
Check if the sta was uploaded to the driver before and
fix this.
Fixes: d00800a289c9 ("wifi: mac80211: add flush_sta method")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.e3d10970a7c7.I491bbcccc46f835ade07df0640a75f6ed92f20a3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3aaa1a5a9a2ceeb32afa6ea4110a92338a863c33 ]
With change (wifi: mac80211: fix receiving A-MSDU
frames on mesh interfaces), a non-zero TID assignment
is lost during slow path mesh forwarding.
Prior to this change, ieee80211_rx_h_mesh_fwding()
left the TID intact in the header.
As a result of this header corruption, packets belonging
to non-zero TIDs will get treating as belonging
TID 0 by functions such as ieee80211_get_tid().
While this miscategorization by itself is an
issue, there are additional ramifications
due to the fact that skb->priority still reflects
the mesh forwarded packet's ingress (correct) TID.
The mt7915 driver inspects the TID recorded within
skb->priority and relays this to the
hardware/radio during TX. The radio firmware appears to
react to this by changing the sequence control
header, but it does not also ensure/correct the TID in
the QoS control header. As a result, the receiver
will see packets with sequence numbers corresponding
to the wrong TID. The receiver of the forwarded
packet will see TID 0 in QoS control but a sequence number
corresponding to the correct (different) TID in sequence
control. This causes data stalls for TID 0 until
the TID 0 sequence number advances past what the receiver
believes it should be due to this bug.
Mesh routing mpath changes cause a brief transition
from fast path forwarding to slow path forwarding.
Since this bug only affects the slow path forwarding,
mpath changes bring opportunity for the bug to be triggered.
In the author's case, he was experiencing TID 0 data stalls
after mpath changes on an intermediate mesh node.
These observed stalls may be specific
to mediatek radios. But the inconsistency between
the packet header and skb->priority may cause problems
for other drivers as well. Regardless if this causes
connectivity issues on other radios, this change is
necessary in order transmit (forward) the packet on the
correct TID and to have a consistent view a packet's TID
within mac80211.
Fixes: 986e43b19ae9 ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces")
Signed-off-by: Andy Strohman <andrew@andrewstrohman.com>
Link: https://patch.msgid.link/20250107104431.446775-1-andrew@andrewstrohman.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3a0168626c138734490bc52c4105ce8e79d2f923 ]
Since adding __counted_by(n_channels) to struct cfg80211_scan_request,
anything adding to the channels array must increment n_channels first.
Move n_channels increment earlier.
Reported-by: John Rowley <lkml@johnrowley.me>
Closes: https://lore.kernel.org/stable/1815535c709ba9d9.156c6a5c9cdf6e59.b249b6b6a5ee4634@localhost.localdomain/
Fixes: aa4ec06c455d ("wifi: cfg80211: use __counted_by where appropriate")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/20241230183610.work.680-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7553477cbfd784b128297f9ed43751688415bbaa ]
In the internal API this calls this is a WARN_ON, but that
should remain since internally we want to know about bugs
that may cause this. Prevent deactivating all links in the
debugfs write directly.
Reported-by: syzbot+0c5d8e65f23569a8ffec@syzkaller.appspotmail.com
Fixes: 3d9011029227 ("wifi: mac80211: implement link switching")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241230091408.505bd125c35a.Ic3c1f9572b980a952a444cad62b09b9c6721732b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 95fc45d1dea8e1253f8ec58abc5befb71553d666 ]
syzbot found a lockdep issue [1].
We should remove ax25 RTNL dependency in ax25_setsockopt()
This should also fix a variety of possible UAF in ax25.
[1]
WARNING: possible circular locking dependency detected
6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0 Not tainted
------------------------------------------------------
syz.5.1818/12806 is trying to acquire lock:
ffffffff8fcb3988 (rtnl_mutex){+.+.}-{4:4}, at: ax25_setsockopt+0xa55/0xe90 net/ax25/af_ax25.c:680
but task is already holding lock:
ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1618 [inline]
ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: ax25_setsockopt+0x209/0xe90 net/ax25/af_ax25.c:574
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (sk_lock-AF_AX25){+.+.}-{0:0}:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849
lock_sock_nested+0x48/0x100 net/core/sock.c:3642
lock_sock include/net/sock.h:1618 [inline]
ax25_kill_by_device net/ax25/af_ax25.c:101 [inline]
ax25_device_event+0x24d/0x580 net/ax25/af_ax25.c:146
notifier_call_chain+0x1a5/0x3f0 kernel/notifier.c:85
__dev_notify_flags+0x207/0x400
dev_change_flags+0xf0/0x1a0 net/core/dev.c:9026
dev_ifsioc+0x7c8/0xe70 net/core/dev_ioctl.c:563
dev_ioctl+0x719/0x1340 net/core/dev_ioctl.c:820
sock_do_ioctl+0x240/0x460 net/socket.c:1234
sock_ioctl+0x626/0x8e0 net/socket.c:1339
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (rtnl_mutex){+.+.}-{4:4}:
check_prev_add kernel/locking/lockdep.c:3161 [inline]
check_prevs_add kernel/locking/lockdep.c:3280 [inline]
validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904
__lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0x1ac/0xee0 kernel/locking/mutex.c:735
ax25_setsockopt+0xa55/0xe90 net/ax25/af_ax25.c:680
do_sock_setsockopt+0x3af/0x720 net/socket.c:2324
__sys_setsockopt net/socket.c:2349 [inline]
__do_sys_setsockopt net/socket.c:2355 [inline]
__se_sys_setsockopt net/socket.c:2352 [inline]
__x64_sys_setsockopt+0x1ee/0x280 net/socket.c:2352
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sk_lock-AF_AX25);
lock(rtnl_mutex);
lock(sk_lock-AF_AX25);
lock(rtnl_mutex);
*** DEADLOCK ***
1 lock held by syz.5.1818/12806:
#0: ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1618 [inline]
#0: ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: ax25_setsockopt+0x209/0xe90 net/ax25/af_ax25.c:574
stack backtrace:
CPU: 1 UID: 0 PID: 12806 Comm: syz.5.1818 Not tainted 6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_circular_bug+0x13a/0x1b0 kernel/locking/lockdep.c:2074
check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2206
check_prev_add kernel/locking/lockdep.c:3161 [inline]
check_prevs_add kernel/locking/lockdep.c:3280 [inline]
validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904
__lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0x1ac/0xee0 kernel/locking/mutex.c:735
ax25_setsockopt+0xa55/0xe90 net/ax25/af_ax25.c:680
do_sock_setsockopt+0x3af/0x720 net/socket.c:2324
__sys_setsockopt net/socket.c:2349 [inline]
__do_sys_setsockopt net/socket.c:2355 [inline]
__se_sys_setsockopt net/socket.c:2352 [inline]
__x64_sys_setsockopt+0x1ee/0x280 net/socket.c:2352
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7b62385d29
Fixes: c433570458e4 ("ax25: fix a use-after-free in ax25_fillin_cb()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250103210514.87290-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a502ea6fa94b1f7be72a24bcf9e3f5f6b7e6e90c ]
If a UDP socket changes its local address while it's receiving
datagrams, as a result of connect(), there is a period during which
a lookup operation might fail to find it, after the address is changed
but before the secondary hash (port and address) and the four-tuple
hash (local and remote ports and addresses) are updated.
Secondary hash chains were introduced by commit 30fff9231fad ("udp:
bind() optimisation") and, as a result, a rehash operation became
needed to make a bound socket reachable again after a connect().
This operation was introduced by commit 719f835853a9 ("udp: add
rehash on connect()") which isn't however a complete fix: the
socket will be found once the rehashing completes, but not while
it's pending.
This is noticeable with a socat(1) server in UDP4-LISTEN mode, and a
client sending datagrams to it. After the server receives the first
datagram (cf. _xioopen_ipdgram_listen()), it issues a connect() to
the address of the sender, in order to set up a directed flow.
Now, if the client, running on a different CPU thread, happens to
send a (subsequent) datagram while the server's socket changes its
address, but is not rehashed yet, this will result in a failed
lookup and a port unreachable error delivered to the client, as
apparent from the following reproducer:
LEN=$(($(cat /proc/sys/net/core/wmem_default) / 4))
dd if=/dev/urandom bs=1 count=${LEN} of=tmp.in
while :; do
taskset -c 1 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,trunc &
sleep 0.1 || sleep 1
taskset -c 2 socat OPEN:tmp.in UDP4:localhost:1337,shut-null
wait
done
where the client will eventually get ECONNREFUSED on a write()
(typically the second or third one of a given iteration):
2024/11/13 21:28:23 socat[46901] E write(6, 0x556db2e3c000, 8192): Connection refused
This issue was first observed as a seldom failure in Podman's tests
checking UDP functionality while using pasta(1) to connect the
container's network namespace, which leads us to a reproducer with
the lookup error resulting in an ICMP packet on a tap device:
LOCAL_ADDR="$(ip -j -4 addr show|jq -rM '.[] | .addr_info[0] | select(.scope == "global").local')"
while :; do
./pasta --config-net -p pasta.pcap -u 1337 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,trunc &
sleep 0.2 || sleep 1
socat OPEN:tmp.in UDP4:${LOCAL_ADDR}:1337,shut-null
wait
cmp tmp.in tmp.out
done
Once this fails:
tmp.in tmp.out differ: char 8193, line 29
we can finally have a look at what's going on:
$ tshark -r pasta.pcap
1 0.000000 :: ? ff02::16 ICMPv6 110 Multicast Listener Report Message v2
2 0.168690 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
3 0.168767 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
4 0.168806 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
5 0.168827 c6:47:05:8d:dc:04 ? Broadcast ARP 42 Who has 88.198.0.161? Tell 88.198.0.164
6 0.168851 9a:55:9a:55:9a:55 ? c6:47:05:8d:dc:04 ARP 42 88.198.0.161 is at 9a:55:9a:55:9a:55
7 0.168875 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
8 0.168896 88.198.0.164 ? 88.198.0.161 ICMP 590 Destination unreachable (Port unreachable)
9 0.168926 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
10 0.168959 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
11 0.168989 88.198.0.161 ? 88.198.0.164 UDP 4138 60260 ? 1337 Len=4096
12 0.169010 88.198.0.161 ? 88.198.0.164 UDP 42 60260 ? 1337 Len=0
On the third datagram received, the network namespace of the container
initiates an ARP lookup to deliver the ICMP message.
In another variant of this reproducer, starting the client with:
strace -f pasta --config-net -u 1337 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,trunc 2>strace.log &
and connecting to the socat server using a loopback address:
socat OPEN:tmp.in UDP4:localhost:1337,shut-null
we can more clearly observe a sendmmsg() call failing after the
first datagram is delivered:
[pid 278012] connect(173, 0x7fff96c95fc0, 16) = 0
[...]
[pid 278012] recvmmsg(173, 0x7fff96c96020, 1024, MSG_DONTWAIT, NULL) = -1 EAGAIN (Resource temporarily unavailable)
[pid 278012] sendmmsg(173, 0x561c5ad0a720, 1, MSG_NOSIGNAL) = 1
[...]
[pid 278012] sendmmsg(173, 0x561c5ad0a720, 1, MSG_NOSIGNAL) = -1 ECONNREFUSED (Connection refused)
and, somewhat confusingly, after a connect() on the same socket
succeeded.
Until commit 4cdeeee9252a ("net: udp: prefer listeners bound to an
address"), the race between receive address change and lookup didn't
actually cause visible issues, because, once the lookup based on the
secondary hash chain failed, we would still attempt a lookup based on
the primary hash (destination port only), and find the socket with the
outdated secondary hash.
That change, however, dropped port-only lookups altogether, as side
effect, making the race visible.
To fix this, while avoiding the need to make address changes and
rehash atomic against lookups, reintroduce primary hash lookups as
fallback, if lookups based on four-tuple and secondary hashes fail.
To this end, introduce a simplified lookup implementation, which
doesn't take care of SO_REUSEPORT groups: if we have one, there are
multiple sockets that would match the four-tuple or secondary hash,
meaning that we can't run into this race at all.
v2:
- instead of synchronising lookup operations against address change
plus rehash, reintroduce a simplified version of the original
primary hash lookup as fallback
v1:
- fix build with CONFIG_IPV6=n: add ifdef around sk_v6_rcv_saddr
usage (Kuniyuki Iwashima)
- directly use sk_rcv_saddr for IPv4 receive addresses instead of
fetching inet_rcv_saddr (Kuniyuki Iwashima)
- move inet_update_saddr() to inet_hashtables.h and use that
to set IPv4/IPv6 addresses as suitable (Kuniyuki Iwashima)
- rebase onto net-next, update commit message accordingly
Reported-by: Ed Santiago <santiago@redhat.com>
Link: https://github.com/containers/podman/issues/24147
Analysed-by: David Gibson <david@gibson.dropbear.id.au>
Fixes: 30fff9231fad ("udp: bind() optimisation")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a126061c80d5efb4baef4bcf346094139cd81df6 ]
Jakub added a lockdep_assert_no_hardirq() check in __page_pool_put_page()
to increase test coverage.
syzbot found a splat caused by hard irq blocking in
ptr_ring_resize_multiple() [1]
As current users of ptr_ring_resize_multiple() do not require
hard irqs being masked, replace it to only block BH.
Rename helpers to better reflect they are safe against BH only.
- ptr_ring_resize_multiple() to ptr_ring_resize_multiple_bh()
- skb_array_resize_multiple() to skb_array_resize_multiple_bh()
[1]
WARNING: CPU: 1 PID: 9150 at net/core/page_pool.c:709 __page_pool_put_page net/core/page_pool.c:709 [inline]
WARNING: CPU: 1 PID: 9150 at net/core/page_pool.c:709 page_pool_put_unrefed_netmem+0x157/0xa40 net/core/page_pool.c:780
Modules linked in:
CPU: 1 UID: 0 PID: 9150 Comm: syz.1.1052 Not tainted 6.11.0-rc3-syzkaller-00202-gf8669d7b5f5d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:__page_pool_put_page net/core/page_pool.c:709 [inline]
RIP: 0010:page_pool_put_unrefed_netmem+0x157/0xa40 net/core/page_pool.c:780
Code: 74 0e e8 7c aa fb f7 eb 43 e8 75 aa fb f7 eb 3c 65 8b 1d 38 a8 6a 76 31 ff 89 de e8 a3 ae fb f7 85 db 74 0b e8 5a aa fb f7 90 <0f> 0b 90 eb 1d 65 8b 1d 15 a8 6a 76 31 ff 89 de e8 84 ae fb f7 85
RSP: 0018:ffffc9000bda6b58 EFLAGS: 00010083
RAX: ffffffff8997e523 RBX: 0000000000000000 RCX: 0000000000040000
RDX: ffffc9000fbd0000 RSI: 0000000000001842 RDI: 0000000000001843
RBP: 0000000000000000 R08: ffffffff8997df2c R09: 1ffffd40003a000d
R10: dffffc0000000000 R11: fffff940003a000e R12: ffffea0001d00040
R13: ffff88802e8a4000 R14: dffffc0000000000 R15: 00000000ffffffff
FS: 00007fb7aaf716c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa15a0d4b72 CR3: 00000000561b0000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tun_ptr_free drivers/net/tun.c:617 [inline]
__ptr_ring_swap_queue include/linux/ptr_ring.h:571 [inline]
ptr_ring_resize_multiple_noprof include/linux/ptr_ring.h:643 [inline]
tun_queue_resize drivers/net/tun.c:3694 [inline]
tun_device_event+0xaaf/0x1080 drivers/net/tun.c:3714
notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93
call_netdevice_notifiers_extack net/core/dev.c:2032 [inline]
call_netdevice_notifiers net/core/dev.c:2046 [inline]
dev_change_tx_queue_len+0x158/0x2a0 net/core/dev.c:9024
do_setlink+0xff6/0x41f0 net/core/rtnetlink.c:2923
rtnl_setlink+0x40d/0x5a0 net/core/rtnetlink.c:3201
rtnetlink_rcv_msg+0x73f/0xcf0 net/core/rtnetlink.c:6647
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2550
Fixes: ff4e538c8c3e ("page_pool: add a lockdep check for recycling in hardirq")
Reported-by: syzbot+f56a5c5eac2b28439810@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/671e10df.050a0220.2b8c0f.01cf.GAE@google.com/T/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241217135121.326370-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a853c609504e2d1d83e71285e3622fda1f1451d8 ]
All inet_getpeer() callers except ip4_frag_init() don't need
to acquire a permanent refcount on the inetpeer.
They can switch to full RCU protection.
Move the refcount_inc_not_zero() into ip4_frag_init(),
so that all the other callers no longer have to
perform a pair of expensive atomic operations on
a possibly contended cache line.
inet_putpeer() no longer needs to be exported.
After this patch, my DUT can receive 8,400,000 UDP packets
per second targeting closed ports, using 50% less cpu cycles
than before.
Also change two calls to l3mdev_master_ifindex() by
l3mdev_master_ifindex_rcu() (Ido ideas)
Fixes: 8c2bd38b95f7 ("icmp: change the order of rate limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 50b362f21d6c10b0f7939c1482c6a1b43da82f1a ]
inet_putpeer() will be removed in the following patch,
because we will no longer use refcounts.
Update inetpeer timestamp (p->dtime) at lookup time.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a853c609504e ("inetpeer: do not get a refcount in inet_getpeer()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7a596a50c4a4eab946aec149171c72321b4934aa ]
All callers of inet_getpeer() want to create an inetpeer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a853c609504e ("inetpeer: do not get a refcount in inet_getpeer()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 661cd8fc8e9039819ca0c22e0add52b632240a9e ]
All callers of inet_getpeer_v4() and inet_getpeer_v6()
want to create an inetpeer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a853c609504e ("inetpeer: do not get a refcount in inet_getpeer()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0e56ebde245e4799ce74d38419426f2a80d39950 ]
Fix the handling of a connection abort that we've received. Though the
abort is at the connection level, it needs propagating to the calls on that
connection. Whilst the propagation bit is performed, the calls aren't then
woken up to go and process their termination, and as no further input is
forthcoming, they just hang.
Also add some tracing for the logging of connection aborts.
Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 10685681bafce6febb39770f3387621bf5d67d0b ]
The current implementation does not work correctly with a limit of
1. iproute2 actually checks for this and this patch adds the check in
kernel as well.
This fixes the following syzkaller reported crash:
UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:210:6
index 65535 is out of range for type 'struct sfq_head[128]'
CPU: 0 PID: 2569 Comm: syz-executor101 Not tainted 5.10.0-smp-DEV #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x125/0x19f lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:148 [inline]
__ubsan_handle_out_of_bounds+0xed/0x120 lib/ubsan.c:347
sfq_link net/sched/sch_sfq.c:210 [inline]
sfq_dec+0x528/0x600 net/sched/sch_sfq.c:238
sfq_dequeue+0x39b/0x9d0 net/sched/sch_sfq.c:500
sfq_reset+0x13/0x50 net/sched/sch_sfq.c:525
qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026
tbf_reset+0x3d/0x100 net/sched/sch_tbf.c:319
qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026
dev_reset_queue+0x8c/0x140 net/sched/sch_generic.c:1296
netdev_for_each_tx_queue include/linux/netdevice.h:2350 [inline]
dev_deactivate_many+0x6dc/0xc20 net/sched/sch_generic.c:1362
__dev_close_many+0x214/0x350 net/core/dev.c:1468
dev_close_many+0x207/0x510 net/core/dev.c:1506
unregister_netdevice_many+0x40f/0x16b0 net/core/dev.c:10738
unregister_netdevice_queue+0x2be/0x310 net/core/dev.c:10695
unregister_netdevice include/linux/netdevice.h:2893 [inline]
__tun_detach+0x6b6/0x1600 drivers/net/tun.c:689
tun_detach drivers/net/tun.c:705 [inline]
tun_chr_close+0x104/0x1b0 drivers/net/tun.c:3640
__fput+0x203/0x840 fs/file_table.c:280
task_work_run+0x129/0x1b0 kernel/task_work.c:185
exit_task_work include/linux/task_work.h:33 [inline]
do_exit+0x5ce/0x2200 kernel/exit.c:931
do_group_exit+0x144/0x310 kernel/exit.c:1046
__do_sys_exit_group kernel/exit.c:1057 [inline]
__se_sys_exit_group kernel/exit.c:1055 [inline]
__x64_sys_exit_group+0x3b/0x40 kernel/exit.c:1055
do_syscall_64+0x6c/0xd0
entry_SYSCALL_64_after_hwframe+0x61/0xcb
RIP: 0033:0x7fe5e7b52479
Code: Unable to access opcode bytes at RIP 0x7fe5e7b5244f.
RSP: 002b:00007ffd3c800398 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe5e7b52479
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
RBP: 00007fe5e7bcd2d0 R08: ffffffffffffffb8 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe5e7bcd2d0
R13: 0000000000000000 R14: 00007fe5e7bcdd20 R15: 00007fe5e7b24270
The crash can be also be reproduced with the following (with a tc
recompiled to allow for sfq limits of 1):
tc qdisc add dev dummy0 handle 1: root tbf rate 1Kbit burst 100b lat 1s
../iproute2-6.9.0/tc/tc qdisc add dev dummy0 handle 2: parent 1:10 sfq limit 1
ifconfig dummy0 up
ping -I dummy0 -f -c2 -W0.1 8.8.8.8
sleep 1
Scenario that triggers the crash:
* the first packet is sent and queued in TBF and SFQ; qdisc qlen is 1
* TBF dequeues: it peeks from SFQ which moves the packet to the
gso_skb list and keeps qdisc qlen set to 1. TBF is out of tokens so
it schedules itself for later.
* the second packet is sent and TBF tries to queues it to SFQ. qdisc
qlen is now 2 and because the SFQ limit is 1 the packet is dropped
by SFQ. At this point qlen is 1, and all of the SFQ slots are empty,
however q->tail is not NULL.
At this point, assuming no more packets are queued, when sch_dequeue
runs again it will decrement the qlen for the current empty slot
causing an underflow and the subsequent out of bounds access.
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Octavian Purdila <tavip@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241204030520.2084663-2-tavip@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
test_cfg80211_parse_colocated_ap()
[ Upstream commit 13c4f7714c6a1ecf748a2f22099447c14fe6ed8c ]
kunit_kzalloc() may return NULL, dereferencing it without NULL check may
lead to NULL dereference.
Add a NULL check for ies.
Fixes: 45d43937a44c ("wifi: cfg80211: add a kunit test for 6 GHz colocated AP parsing")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Link: https://patch.msgid.link/20241115063835.5888-1-zichenxie0106@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d62b04fca4340a0d468d7853bd66e511935a18cb upstream.
Haowei Yan <g1042620637@gmail.com> found that ets_class_from_arg() can
index an Out-Of-Bound class in ets_class_from_arg() when passed clid of
0. The overflow may cause local privilege escalation.
[ 18.852298] ------------[ cut here ]------------
[ 18.853271] UBSAN: array-index-out-of-bounds in net/sched/sch_ets.c:93:20
[ 18.853743] index 18446744073709551615 is out of range for type 'ets_class [16]'
[ 18.854254] CPU: 0 UID: 0 PID: 1275 Comm: poc Not tainted 6.12.6-dirty #17
[ 18.854821] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 18.856532] Call Trace:
[ 18.857441] <TASK>
[ 18.858227] dump_stack_lvl+0xc2/0xf0
[ 18.859607] dump_stack+0x10/0x20
[ 18.860908] __ubsan_handle_out_of_bounds+0xa7/0xf0
[ 18.864022] ets_class_change+0x3d6/0x3f0
[ 18.864322] tc_ctl_tclass+0x251/0x910
[ 18.864587] ? lock_acquire+0x5e/0x140
[ 18.865113] ? __mutex_lock+0x9c/0xe70
[ 18.866009] ? __mutex_lock+0xa34/0xe70
[ 18.866401] rtnetlink_rcv_msg+0x170/0x6f0
[ 18.866806] ? __lock_acquire+0x578/0xc10
[ 18.867184] ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[ 18.867503] netlink_rcv_skb+0x59/0x110
[ 18.867776] rtnetlink_rcv+0x15/0x30
[ 18.868159] netlink_unicast+0x1c3/0x2b0
[ 18.868440] netlink_sendmsg+0x239/0x4b0
[ 18.868721] ____sys_sendmsg+0x3e2/0x410
[ 18.869012] ___sys_sendmsg+0x88/0xe0
[ 18.869276] ? rseq_ip_fixup+0x198/0x260
[ 18.869563] ? rseq_update_cpu_node_id+0x10a/0x190
[ 18.869900] ? trace_hardirqs_off+0x5a/0xd0
[ 18.870196] ? syscall_exit_to_user_mode+0xcc/0x220
[ 18.870547] ? do_syscall_64+0x93/0x150
[ 18.870821] ? __memcg_slab_free_hook+0x69/0x290
[ 18.871157] __sys_sendmsg+0x69/0xd0
[ 18.871416] __x64_sys_sendmsg+0x1d/0x30
[ 18.871699] x64_sys_call+0x9e2/0x2670
[ 18.871979] do_syscall_64+0x87/0x150
[ 18.873280] ? do_syscall_64+0x93/0x150
[ 18.874742] ? lock_release+0x7b/0x160
[ 18.876157] ? do_user_addr_fault+0x5ce/0x8f0
[ 18.877833] ? irqentry_exit_to_user_mode+0xc2/0x210
[ 18.879608] ? irqentry_exit+0x77/0xb0
[ 18.879808] ? clear_bhb_loop+0x15/0x70
[ 18.880023] ? clear_bhb_loop+0x15/0x70
[ 18.880223] ? clear_bhb_loop+0x15/0x70
[ 18.880426] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 18.880683] RIP: 0033:0x44a957
[ 18.880851] Code: ff ff e8 fc 00 00 00 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 8974 24 10
[ 18.881766] RSP: 002b:00007ffcdd00fad8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 18.882149] RAX: ffffffffffffffda RBX: 00007ffcdd010db8 RCX: 000000000044a957
[ 18.882507] RDX: 0000000000000000 RSI: 00007ffcdd00fb70 RDI: 0000000000000003
[ 18.885037] RBP: 00007ffcdd010bc0 R08: 000000000703c770 R09: 000000000703c7c0
[ 18.887203] R10: 0000000000000080 R11: 0000000000000246 R12: 0000000000000001
[ 18.888026] R13: 00007ffcdd010da8 R14: 00000000004ca7d0 R15: 0000000000000001
[ 18.888395] </TASK>
[ 18.888610] ---[ end trace ]---
Fixes: dcc68b4d8084 ("net: sch_ets: Add a new Qdisc")
Reported-by: Haowei Yan <g1042620637@gmail.com>
Suggested-by: Haowei Yan <g1042620637@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250111145740.74755-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Li Li reports that casting away callback type may cause issues
for CFI. Let's generate a small wrapper for each callback,
to make sure compiler sees the anticipated types.
Reported-by: Li Li <dualli@chromium.org>
Link: https://lore.kernel.org/CANBPYPjQVqmzZ4J=rVQX87a9iuwmaetULwbK_5_3YWk2eGzkaA@mail.gmail.com
Fixes: 170aafe35cb9 ("netdev: support binding dma-buf to netdevice")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250115161436.648646-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When __netpoll_setup() is called directly, instead of through
netpoll_setup(), the np->skb_pool list head isn't initialized.
If skb_pool_flush() is later called, then we hit a NULL pointer
in skb_queue_purge_reason(). This can be seen with this repro,
when CONFIG_NETCONSOLE is enabled as a module:
ip tuntap add mode tap tap0
ip link add name br0 type bridge
ip link set dev tap0 master br0
modprobe netconsole netconsole=4444@10.0.0.1/br0,9353@10.0.0.2/
rmmod netconsole
The backtrace is:
BUG: kernel NULL pointer dereference, address: 0000000000000008
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
... ... ...
Call Trace:
<TASK>
__netpoll_free+0xa5/0xf0
br_netpoll_cleanup+0x43/0x50 [bridge]
do_netpoll_cleanup+0x43/0xc0
netconsole_netdev_event+0x1e3/0x300 [netconsole]
unregister_netdevice_notifier+0xd9/0x150
cleanup_module+0x45/0x920 [netconsole]
__se_sys_delete_module+0x205/0x290
do_syscall_64+0x70/0x150
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Move the skb_pool list setup and initial skb fill into __netpoll_setup().
Fixes: 221a9c1df790 ("net: netpoll: Individualize the skb pool")
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250114011354.2096812-1-jsperbeck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The wake-up condition currently implemented by mptcp_epollin_ready()
is wrong, as it could mark the MPTCP socket as readable even when
no data are present and the system is under memory pressure.
Explicitly check for some data being available in the receive queue.
Fixes: 5684ab1a0eff ("mptcp: give rcvlowat some love")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-2-0d986ee7b1b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
